Rosewill RCX-Z2-EX User's Manual
Contents
1. COOLER RCX 2Z2 EX USER Manual Thank you for purchasing a High Quality Rosewill Product Please register your product at www rosewill com for complete warranty information and future support for your product If you have any question while using our products please visit our website www rosewill com for latest driver amp user manual or feel free to contact us at feedback rosewill com Support Email techsupport rosewill com S 519 prepara tions for Intel Turn off the computer and unplug all cables Open the computer to remove any existing cooler care fully Using tissues to clean the CPU surface and remove any remaining paste Please attach the clip for socket 775 with heatsink base by using 4 screws To release the clips of the exist ing cooler rotate the head of the clips by 90 using a slotted screwdriver and pull the clip upward Apply paste to the middle of CPU surface Use approximately 1 2 of the injection Keep the paste in the center and do not spread the paste The four plastic clips must first be aligned in the right position turn the black plastic head clockwise Align the cooler horizontally in the standard ATX case Slightly turn the cooler in a small angle as shown by the arrows to ensure that the paste is spread evenly and no air bubbles are left between the CPU and cooler surfaces The metal clips have been given numbers 1 and 2 Press down both numbers 1 at the2. same time and repeat this step with numbers 2 After checking the correct fit of the clips press the black clip head downward until they click into place by using fingers and a slotted screwdriver together Attach the power plug of cooler onto the power socket of mother board Close your case properly reconnect the cables and turn on your computer Advice For enjoying the very low noiselevel of your cooler please check also the noiselevel of other components of your system system fans chipset cooler power supply and VGA cooler Step prepara tions User Manual for AMD Turn off the computer and unplug all cables Open the computer to remove any existing cooler carefully Using tissues to clean the CPU surface and remove any remaining paste Fasten the pair of clips for AMD with heatsink base by using 4 screws Apply paste to the middle of CPU surface Use approximately 1 2 of the injection Keep the paste in the center and do not spread the paste Align the CPU cooler until it fits in the black CPU socket cradle in the right position Ensure that the power cable of CPU cooler has enough space to connect to the power socket Slightly turn the cooler in a small angle as shown by the arrows to ensure that the paste is spread evenly and no air bubbles are left between the CPU and cooler surfaces Hook the hole of one side clip onto the lug of Retention frame and hook the hole of another si
3. de clip onto the lug of Retention frame Press down the clip on the hooks and fasten the levers properly by using a finger and a phillips screwdriver onto a hole together Attach the power plug of cooler onto the power socket of motherboard Close your case properly reconnect the cables and turn on your computer Advice For enjoying the very lew noiselevel of your cooler please check also the noiselevel of other components of your system system fans chipset cooler power supply and VGA cooler WEEE opproved fon
Download Pdf Manuals
Related Search