Revolabs Microphone VSX7000e User's Manual
Contents
1. F THE VSX7000e VIDEO CODEC Select SYSTEM Select ADMIN SETTINGS Select AUDIO Set Red LINE INPUT to AUDIO MIXER DISABLE Echo Canceller DISABLE Polycom microphones by removing checkmark on ENABLE POLY COM MICROPHONES 7 Set the output volume on the VSX7000e to 100 or 50 in the audio configuration menu Oe a a NOTE You must use your Fusion remote control to control the room volume for both the audio and video conference calls Adjusting the volume in the video codec will cause echo revo2. revo Revolabs Fusion Microphone System Polycom VSX7000e Setup Guide NOTES AND CAUTIONS This setup guide will guide you through the steps needed to properly connect a Revolabs Fusion System to a Polycom VSX7000e video codec 1 Connecting the Cables 2 Configuring the VSX7000e Video Codec Note t 6 important to carefully follow these instructions in order and compktel Otherwise your Fusion System and or the video codec may not function properly Please read through these instructions completely before proceeding Contact Revolabs technical support if you have any questions Requirements for connecting systems 1 Revolabs Fusion 4 or 8 channel microphone system 2 Polycom VSX7000e video codec 3 Qty 2 RCA RCA male cable 4 Amplified speakers Connecting the Cables CONNECTING A REVOLABS FUSION SYSTEM TO POLYCOM vsx7000e VIDEO CODEC 1 Connect a male RCA RCA audio cable between the CONF IN port on the Fusion and the red AUDIO OUT port on the VSX7000e 2 Connect a male RCA RCA audio cable between the CONF OUT port on the Fusion and the red LINE INPUT port on the VSX7000e 3 Connect a Male RCA audio cable between the Room Out port on the Fusion and the Speakers Note The speakers used for audio and video conferencing with this configuration must be connected to the Fusion for proper echo cancellation revo 295 Configuring the VSX7000e Video Codec CONFIGURING THE AUDIO MENUS O
Download Pdf Manuals
Related Search