Professional Series PS74181 User's Manual
Contents
1. Open the lid 2 Raise the tip of the iron to help the water enter the opening without overflowing Slowly pour the water into the reservoir using the special measure 20 and taking care not to go over the maximum level about 300ml indi cated by MAX on the reservoir Fig 2 Close the lid 2 lt We recommend using the lowest temperatures with fabrics that have unusual finishes sequins embroidery flush etc If the fabric is mixed e g 40 cotton 60 synthetics set the thermostat to the temperature of the fibre requiring the lower temperature If you don t know the composition of the fabric determine the suitable temperature by testing on a hidden corner of the garment Start with a low temperature and increase it gradually until it reaches the ideal tem perature Never iron areas with traces of perspiration or other marks the heat of the plate fixes the stains on the fabric making them irremovable The size is more effective if you use a dry iron at a moderate tempera ture excess heat scorches it with the risk of forming a yellow mark To avoid marking silk woolen or synthetic garments shiny iron them inside out To avoid marking velvet garments shiny iron in one direction following the fibre and do not press down on the iron The heavier the washing machine is loaded the more garments come out creased This also hap2. Professional Series collezioniti Iron User Manual Model PS74181 SAFETY INSTRUCTIONS When using your flatiron basic safety precautions should always be followed including the following READ ALL INSTRUCTIONS BEFORE USING 1 2 3 Use iron only for its intended use To protect against a risk of electric shock do not immerse the iron in water or other liquids The iron should always be turned to Off before plugging or unplugging from outlet Never yank cord to disconnect from outlet instead grasp plug and pull to disconnect Do not allow cord to touch hot surfaces Let iron cool completely before putting away Loop cord loosely around iron when storing Always disconnect iron from electrical outlet when filling with water or emptying and when not in use Do not operate iron with a damaged cord or if the iron has been dropped or damaged To avoid the risk of electric shock do not disassemble the iron take it to a qualified serviceman for examination and repair Incorrect reassembly can cause a risk of electric shock when the iron is used Close supervision is necessary for any appliance being used by or near children Do not leave iron unattended while connected or on an ironing board Burns can occur from touching hot metal parts hot water or steam Use caution when you turn a steam iron upside down there may be hot water in the reservoir If the malfunction indicato
3. TM WAU 1 Spray organ 2 Filler door 3 Steam dial 4 Shot steam button 5 Spray button 6 LCD window 7 Maximum filling level 8 Temperature button 9 Handle cover 10 Cord bushing 11 Supply cord 12 Rear Bushion 13 Rear top cap 14 Handle 15 Rear middle cap 16 Transparent water tank 17 Plate temperature control light 18 Self cleaning button 19 Plastic skirt 20 Plate with steam vents GENERAL INSTRUCTIONS When using the iron for the first time you may notice a slight emission of smoke and hear some sounds made by the expanding plastics This is quite normal and it stops after a short time We also recommend passing the iron over an ordinary cloth before using it for the first time PREPARATIONS Soft the laundry to be ironed according to the international symbols on the garment label or if this is missing according to the type of fabric GARMENT FABRIC THERMOSTAT LABEL TYPE REGULATION gt synthetic low temperature ee silk wool medium temperature Cotton linen high temperature Fabric not to be ironed Start ironing the garments requiring a low temperature This reduces the waiting times the iron takes less time to heat up than to cool down and eliminates the risk of scorching the fabric STEAM IRONING Filling the reservoir Check that the plug is disconnected from the socket Move the steam selector 3 to 0 Fig 1
4. pens when the spin drying revolutions are very high Many fabrics are easier to iron if they are not completely dry For example silk should always be ironed damp DRY IRONING To iron without steam follow the instructions in section steam ironing leaving the steam selector 3 on position 0 Spray Function Make sure that there is water in the reservoir Press the spray button 5 slowly for a dense spray or quickly for a vaporized spray Fig 6 Warning for delicate fabrics we recommend moistening the fabric be forehand using the spray function 5 or putting a damp cloth between the iron and the fabric To avoid staining do not use the spray on silk or synthetic fabrics CLEANING Please note before cleaning the iron in any way make sure that the appliance plug is not connected to the socket Any deposits starch residue or size left on the plate can be removed using a damp cloth or an unabrasive liquid detergent Avoid scratching the plate with steel wool or metallic objects The plastic parts can be cleaned with a damp cloth then wiped over with a dry cloth SELF CLEANING The self cleaning feature cleans inside the plate removing impurities We recommend using it every 10 15days Directions Fill the reservoir up to the maximum level indicated and set the steam selector 3 to 0 Set the temperature button 8 to the maximum temperature and wait for the light 17 to turn off Pull the
5. plug out of the socket and hold the iron horizontally over the sink Hold the cleanout button 18 setting until all the boiling water steam impurities come out Fig 7 When the soleplate has cooled down you can clean it with a damp cloth HOW TO PUT IT AWAY Disconnect the plug of the iron from the socket Empty the reservoir by turning the iron upside down and gently shaking it Leave the iron to cool down completely Roll up the power cord with the rewinder Fig 8 Always put the iron away in a vertical position ADVICE FOR GOOD IRONING Selecting the temperature Put the iron in a vertical position Put the plug in the socket press with one finger the knob 8 according to the international symbol on the garment label Fig 3 The plate temperature control light 17 indicates that the iron is heating up Wait until the plate temperature control light goes to off before ironing Warning during ironing the plate temperature control light 17 comes on at intervals indicating that the selected temperature is maintained If you lower the thermostat temperature after ironing at a high tempera ture do not start ironing until the plate temperature control light comes on again Selecting the steam The quantity of steam is regulated by the steam selector 3 Move the steam selector to a position between minimum and maximum depending on the quantity of steam required and the temperature se lec
6. r goes on the flatiron is not operating nor mally Disconnect from the power supply and have the flatiron serviced by qualified service personnel SPECIAL INSTRUCTIONS To avoid a circuit overload do not operate another high wattage appliance on the same circuit If an extension cord is absolutely necessary a 10 ampere cord should be used Cords rated for less amperage may overheat Care should be taken to arrange the cord so that it cannot be pulled or tripped over SAVE THESE INSTRUCTIONS More specifically DO NOT let children or untrained persons use the appliance without supervision NEVER immerse the iron cable or plug in any liquid DO NOT leave the hot iron touching fabrics or very inflammable sur faces DO NOT leave the appliance unnecessarily plugged in Disconnect the plug from the mains when the appliance is not being used NEVER touch the appliance with wet or damp hands DO NOT use the power cord or the appliance in order to pull the plug out of the socket DO NOT leave the appliance exposed to the weather rain sun etc DO NOT leave the iron without supervision when it is connected to the power supply DO NOT fill the reservoir with water before removing the plug from the socket PLEASE NOTE Do not use chemical additive scented substances or decalcifiers Fail ure to comply with the above mentioned regulations leads to the loss of guarantee DESCRIPTION OF DEVICE Ip DNS
7. ted Fig 1 Warning the iron gives off steam continuously only if you hold the iron horizontally You can stop the continuous steam by placing the iron in a vertical position or by moving the steam selector to 0 As indicated on the handle cover 9 and in the initial table you can only use steam at the highest temperatures If the selected temperature is too low water may drip onto the plate Selecting Shot steam and steam when ironing vertically Press the shot steam button 4 to generate a powerful burst of steam that can penetrate the fabrics and smooth the most difficult and tough creases Wait for a few seconds before pressing again Fig 4 By pressing the shot steam button at intervals you can also iron vertically curtains hung garments etc Fig 5 Warning the shot steam function can only be used at high temperatures Stop the emission when the plate temperature control light 17 comes on than start ironing again only after the light has gone off
Download Pdf Manuals
Related Search