Porter-Cable FN250A User's Manual
Contents
1.2. Sr Vice President of Technology PORTER CABLE PROFESSIONAL POWER TOOLS Date of Manufacture Fecha de fabricaci n Date de fabrication Serial No N mero de serie Nombre d ordre SAFETY GUIDELINES DEFINITIONS This manual contains information that is important for you to know and under stand This information relates to protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS To help you recognize this information we use the symbols below Please read the manual and pay attention to these sections INN indicates an imminently hazardous situation which if not avoided will result in death or serious injury NAGINI eg indicates a potentially hazardous situation which if not avoided could result in death or serious injury IN Wiley indicates a potentially hazardous situation which if not avoided may result in minor or moderate injury JN lo used without the safety alert symbol indicates potentially hazardous situation which if not avoided may result in property damage IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS Improper operation or maintenance of this product could result in serious injury and property damage Read and understand all warnings and operating instructions before using this tool When using pneumatic tools basic safety precautions should always be followed to reduce the risk of personal injury READ AND FOLLOW ALL INSTRUCTIONS There are certain applications for w
3. WORKS Jet Lock JETSTREAM kickstand LASERLOC MICRO SET Micro Set MIDI LATHE MORTEN NETWORK OMNIJIG POCKET CUTTER PORTA BAND PORTA PLANE PORTER CABLE amp design PORTER CABLE PROFESSIONAL POWER TOOLS Posi Matic Q 3 amp design QUICKSAND amp design QUICKSET QUICKSET II QUICKSET PLUS RIPTIDE amp design SAFE GUARD II SAFE LOC Sanding Center SANDTRAP amp design SAW BOSS Sawbuck Sidekick SPEED BLOC SPEEDMATIC SPEEDTRONIC STAIR EASE The American Woodshop 8 design The Lumber Company amp design THE PROFESSIONAL EDGE THE PROFESSIONAL SELECT THIN LINE TIGER TIGER CUBS TIGER SAW TORQBUSTER TORQ BUSTER TRU MATCH TWIN LITE UNIGUARD Unifence UNIFEEDER Unihead Uniplane Unirip Unisaw Univise Versa Feeder VERSA PLANE WHISPER SERIES WOODWORKER S CHOICE Trademarks noted with and are registered in the United States Patent and Trademark Office and may also be registered in other countries Las Marcas Registradas con el signo de y son registradas por la Oficina de Registros y Patentes de los Estados Unidos y tambi n pueden estar registradas en otros pa ses Marques d pos es indiqu es par la lettre et sont d pos es au Bureau des brevets d invention et marques d pos es aux Etats Unis et pourraient tre d pos es aux autres pays Printed in U S A PC 0303 151
4. and hold trigger while pushing the tool firmly against work surface The tool will fire a fastener each time the safety is depressed This method is known as bottom fire and allows very fast repetitive fastener placement The bottom fire trigger is available free of charge by calling 1 800 321 9443 in the United States and Canada or 001 901 660 9374 outside the United States and Canada and providing tool model and serial number For identification purposes the Bottom Fire Trigger is black and the Restrictive Fire Trigger is red Remove finger from trigger when not driving fasteners Never carry tool with finger on trigger tool will fire a fastener if safety is bumped Keep fingers AWAY from trigger when not driving fasteners to avoid accidental firing Never carry tool with finger on trigger In Contact Actuation Mode tool will fire a fastener if safety is bumped while trigger is depressed e Never point tool at yourself or others e Never attempt to drive a fastener into material that is too hard or at too steep an angle or near the edge of the workpiece The fastener can ricochet causing personal injury ENZO Disconnect tool from air supply before performing maintenance clearing a jammed fastener leaving work area moving tool to another location or handing the tool to another person INTIMO clean and inspect tool daily Carefully check for proper operation of trigger and safety mechanism Do Not use the
5. rep rer un Pour obtenir des pi ces et accessoires pour les produits Porter Cable e Delta s adresser a tout distributeur Porter Cable Delta centre de service agr ou centre de service d usine Porter Cable e Delta Si vous n avez acc s a aucun de ces centres appeler le 888 848 5175 et on vous dirigera vers le centre de service d usine Porter Cable e Delta le plus proche CANADIAN PORTER CABLE DELTA SERVICE CENTERS ALBERTA MANITOBA QUEBEC Bay 6 2520 23rd St N E 1699 Dublin Avenue 1515 Ave Calgary Alberta Winnipeg Manitoba St Jean Baptiste T2E 8L2 R3H 0H2 Qu bec Qu bec Phone 403 735 6166 Phone 204 633 9259 G2E 5E2 Fax 403 735 6144 Fax 204 632 1976 Phone 418 877 7112 BRITISH COLUMBIA ONTARIO Faxe 41887 7123 8520 Baxter Place 505 Southgate Drive 1447 Begin Burnaby B C Guelph Ontario St Laurent Montr al Qu bec V5A 478 N1H 6M7 HAR 1V8 Phone 604 420 0102 Phone 519 836 2840 Phone 614 336 8772 Fax 604 420 3522 Fax 519 767 4131 Fax 514 336 3505 The following are trademarks of PORTER CABLE e DELTA Las siguientes son marcas registradas de PORTER CABLE e DELTA S A Les marques suivantes sont des marques de fabriquant de la PORTER CABLE e DELTA Auto Set BAMMER B O S S Builder s Saw Contractor s Saw Contractor s Saw II Delta DELTACRAFT DELTAGRAM Delta Series 2000 DURATRONICTM Emc FLEX Flying Chips FRAME SAW Homecraft INNOVATION THAT
6. tool unless both the trigger and the safety mechanism are functional or if the tool is leaking air or needs any other repair The depth to which a fastener is driven is controlled by the depth adjustment knob A Fig 26 The depth of drive is factory adjusted to a nominal setting Test fire a fastener and check depth If a change is desired rotate the adjustment knob A Fig 26 the adjustment knob has detents every 1 4 turn Rotate the knob clockwise see Fig 26 to increase the depth of drive rotate the knob counterclockwise to decrease the depth of drive Test fire another fastener and check depth Repeat as necessary to achieve desired results The amount of air pressure required will vary depending on the size of the fastener and the material being fastened Experiment with the air pressure setting to determine the lowest setting that will consistently perform the job at hand Air pressure in excess of that required can cause premature wear and or damage to the tool CLEARING A JAMMED FASTENER ENZO Disconnect tool from air supply 2 Open magazine and remove any remaining fasteners 3 Depress the quick release latch lever A Fig 27 and hinge the fastener guide plate open 4 Remove the jammed fastener see Fig 28 5 Close the fastener guide plate and secure with the quick release latch 10 MAINTENANCE CLEAN AND INSPECT DAILY IAN Disconnect tool from air supply before cleaning and inspection Correc
7. 1 2 long see FASTENER GUIDE Section of this manual Use approved Porter Cable fasteners only POWER SOURCE This tool is designed to operate on clean dry compressed air at regulated pressures between 70 and 120 PSI Pounds per Square Inch 4 8 to 8 3 BAR The preferred system would include a filter a pressure regulator and an automatic oiler located as close to the tool as possible within 15 ft 4 6 m is ideal All compressed air contains moisture and other contaminates that are detrimental to internal components of the tool An air line filter will remove most of these contaminates and significantly prolong the life of the tool If an in line oiler is not available place five or six drops of Porter Cable Air Tool Oil into the tool s air inlet at the beginning of each workday The tool is equipped with a 14 male quick connector A 3 male quick connector is available from Porter Cable and may be used in situations where a 1 4 supply line is not available A Y supply line and fittings are required for maximum tool performance The tool must always be connected to the air supply with a coupling such that all pressure is removed from the tool when the coupling is disconnected PINE All air line components hoses connectors filters regulators etc must have a minimum working pressure rating of at least 150 PSI 10 3 BAR or 150 of maximum system potential whichever is greater e Do not connect tool to press
8. ESPANOL PAGINA 13 FRANCAISE PAGE 25 Instruction FINISH NAILER manual MODEL FN250A IMPORTANT To learn more about Porter Cable Please make certain that the person who is visit our website at to use this equipment carefully reads and understands these instructions before http www porter cable com starting operations The Model and Serial No plate is located on the main housing of the tool Record these numbers in the spaces below and retain for future reference PORTER CABLE can PROFESSIONAL POWER TOOLS Type Serial No Copyright 2003 Porter Cable Corporation Part No 903096 05 09 03 PORTER CABLE Porter Cable Corporation 4825 Highway 45 North Jackson TN 38305 GB ENGLISH EC DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in conformity with the regulations EN292 2 section 3 of 1992 EN292 1 section 5 of 1992 EN1050 1993 EN792 13 2000 E ESPANOL DECLARACION DE CONFORMIDAD CE Declaramos bajo nuestra sola responsabilidad que est e producto est en conformidad con las regulaciones EN292 2 section 3 of 1992 EN292 1 section 5 of 1992 EN1050 1993 EN792 13 2000 F FRAN AISE DECLARATION DE CONFORMITE CE Nous declarons sous notre propre responsabilite que ce produit est conforme aux reglementations EN292 2 section 3 of 1992 EN292 1 section 5 of 1992 EN1050 1993 EN792 13 2000 a le lla Robert F Burkholder
9. arrants its nailing and stapling tools for a period of one year from the date of original purchase We will repair or replace at our option any part or parts of the product and accessories covered under this warranty which after examination proves to be defective in workmanship or material during the warranty period For repair or replacement return the complete tool or accessory transportation prepaid to your nearest Porter Cable Service Center or Authorized Service Station Proof of purchase may be required This warranty does not apply to O rings and Driver Blades or to repair or replacement required due to misuse abuse normal wear and tear or repairs attempted or made by other than our Service Centers or Authorized Service Stations ANY IMPLIED WARRANTY INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WILL LAST ONLY FOR ONE 1 YEAR FROM THE DATE OF PURCHASE To obtain information on warranty performance please write to PORTER CABLE CORPORATION 4825 Highway 45 North Jackson Tennessee 38305 Attention Product Service THE FOREGOING OBLIGATION IS PORTER CABLE S SOLE LIABILITY UNDER THIS OR ANY IMPLIED WARRANTY AND UNDER NO CIRCUMSTANCES SHALL PORTER CABLE BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not a
10. g 5 8 Use clean dry regulated com pressed air at 70 to 120 PSI 4 8 to 8 3 BAR Fig 6 9 Do not connect tool to pressure which potentially exceeds 200 PSI 13 7 BAR 10 Only use air hose that is rated for a maximum working pressure of at least 150 PSI 10 3 BAR or 150 of the maximum system pressure which ever is greater 11 Connect tool to air supply hose with a coupling that automatically removes all pressure from the tool when the coupling is disconnected Fig 7 12 Disconnect tool from air supply hose before doing tool maintenance clearing a jammed fastener leaving work area moving tool to another location or handing the tool to another person Fig 7 13 Never use a tool that is leaking air has missing or damaged parts or requires repair Make sure all screws and caps are securely tightened Fig 8 14 Never use tool if safety trigger or springs are inoperable missing or damaged Do not alter or remove safety trigger or springs Make daily inspections for free movement of trigger and safety mechanism Fig 8 15 Do not use tool without safety warning label If label is missing damaged or unreadable contact your Porter Cable Service Center for a replacement Fig 9 16 Only use parts fasteners and accessories approved by Porter Cable 17 Connect tool to air supply before loading fasteners to prevent a fastener from being fired duri
11. hich this tool was designed Porter Cable strongly recommends that this tool NOT be modified and or used for any application other than for which it was designed If you have any questions relative to its application DO NOT use the tool until you have written Porter Cable and we have advised you Technical Service Manager Porter Cable Corporation 4825 Highway 45 North Jackson TN 38305 AWARNING GENERAL SAFETY RULES 1 Read and understand tool labels and manual Failure to follow warnings could result in DEATH or SERIOUS INJURY Fig 1 2 Operator and others in work area MUST wear safety glasses with side shields These safety glasses must conform to ANSI Z87 1 requirements approved glasses have Z87 printed or stamped on them Fig 2 INTE Keep fingers AWAY from trigger when not driving fasteners to avoid accidental firing 4 Choice of triggering method is important Check manual for triggering options See Using the Tool with Selectable Triggering Options section of this manual 5 Never point tool at yourself or others in work area Fig 3 6 ADANGER Never use oxygen or other bottled gasses Explosion may occur Never use combustible gases or any other reactive gas as a power source for this tool explosion and serious personal injury could result Fig 3 8 Fig 4 7 Wear ear protection to safe guard against possible hearing loss Ear protection equipment must conform to ANSI S3 19 requirements Fi
12. ington Blvd Phone 410 799 9394 Fax 410 799 9398 MASSACHUSETTS Braintree 02185 Boston 719 Granite Street Phone 781 848 9810 Fax 781 848 6759 Franklin 02038 Boston Franklin Industrial Park 101E Constitution Blvd Phone 508 520 8802 Fax 508 528 8089 MICHIGAN Madison Heights 48071 Detroit 30475 Stephenson Highway Phone 248 597 5000 Fax 248 597 5004 MINNESOTA Minneapolis 55429 5522 Lakeland Avenue North Phone 763 561 9080 Fax 763 561 0653 MISSOURI North Kansas City 64116 1141 Swift Avenue Phone 816 221 2070 Fax 816 221 2897 St Louis 63119 7574 Watson Road Phone 314 968 8950 Fax 314 968 2790 NEW YORK Flushing 11365 1595 N Y C 175 25 Horace Harding Expwy Phone 718 225 2040 Fax 718 423 9619 NORTH CAROLINA Charlotte 28270 9129 Monroe Road Suite 115 Phone 704 841 1176 Fax 704 708 4625 OHIO Columbus 43214 4560 Indianola Avenue Phone 614 263 0929 Fax 614 263 1238 Cleveland 44125 8001 Sweet Valley Drive Unit 19 Phone 216 447 9030 Fax 216 447 3097 OREGON Portland 97230 4916 NE 122 nd Ave Phone 503 252 0107 Fax 503 252 2123 PENNSYLVANIA Willow Grove 19090 520 North York Road Phone 215 658 1430 Fax 215 658 1433 TEXAS Carrollton 75006 Dallas 1300 Interstate 35 N Suite 112 Phone 972 446 2996 Fax 972 446 8157 Houston 77055 West 10 Business Center 1008 Wirt Road Suite 120 Pho
13. nal injury Fig 15 26 Do not drive fasteners close to the edge of the workpiece The workpiece is likely to split allowing the fastener to fly free or ricochet causing personal injury Fig 16 27 FOR TOOLS SET FOR CONTACT ACTUATION MODE Do not use on scaffoldings or ladders or for tasks in which changing location involves the use of scaffoldings stairs ladders and the like Do not use for specific tasks such as closing boxes or crates or fitting transportation safety systems on vehicles and wagons Fig 17 TECHNICAL SPECIFICATIONS Noise level Typical Mean A Weighted sound impulse effective Acceleration 3 91 m s power level P Emission sound pressure pressure level 86 3 dBA EMPLOYER S RESPONSIBILITIES LIC Employer must enforce compliance with the safety warnings and all other instructions contained in this manual Keep this manual available for use by all people assigned to use this tool For personal safety and proper operation of this tool read and understand tool labels and manual Failure to follow warnings could result in DEATH or SERIOUS INJURY Read and follow all of these instructions carefully FUNCTIONAL DESCRIPTION FOREWORD Porter Cable Model FN250A is a heavy duty pneumatic finish nailer It is designed to install 16 ga finish nails of various lengths from 3 4 to 2 1 2 long Fastener Guide furnished with FN250A must be used when driving fasteners that are less than
14. ne 713 682 0334 Fax 713 682 4867 WASHINGTON Auburn 98001 Seattle 3320 West Valley HWY North Building D Suite 111 Phone 253 333 8353 Fax 253 333 9613 Forest Park 30297 Atlanta 5442 Frontage Road Suite 112 Phone 404 608 0006 Fax 404 608 1123 Authorized Service Stations are located in many large cities Telephone 800 487 8665 or 731 541 6042 for assistance locating one Parts and accessories for Porter Cable e Delta products should be obtained by contacting any Porter Cable e Delta Distributor Authorized Service Center or Porter Cable e Delta Factory Service Center If you do not have access to any of these call 888 848 5175 and you will be directed to the nearest Porter Cable e Delta Factory Service Center Las Estaciones de Servicio Autorizadas estan ubicadas en muchas grandes ciudades Llame al 800 487 8665 6 al 731 541 6042 para obtener asistencia a fin de localizar una Las piezas y los accesorios para los productos Porter Cable e Delta deben obtenerse poni ndose en contacto con cualquier distribuidor Porter Cable Delta Centro de Servicio Autorizado o Centro de Servicio de F brica Porter Cable Delta Si no tiene acceso a ninguna de estas opciones llame al 888 848 5175 y le dirigir n al Centro de Servicio de F brica Porter Cable e Delta m s cercano Des centres de service agr s sont situ s dans beaucoup de grandes villes Appelez au 800 487 8665 ou au 731 541 6042 pour obtenir de l aide pour en
15. ng connection The tool driving mechanism may cycle when tool is connected to the air supply Fig 10 18 Always assume the tool contains fasteners No horseplay Respect the tool as a working implement Fig 11 19 Operator and bystanders wear hard hat to safeguard against possible injuries Fig 12 20 Do not load fasteners with trigger or safety depressed to prevent unintentional firing of a fastener Fig 13 21 Remove finger from trigger when not driving fasteners Never carry tool with finger on trigger In Contact Actuation Mode tool will fire a fastener if safety is bumped while trigger is depressed Fig 14 22 Do not overreach Keep proper footing and balance at all times when using or handling the tool 23 Fire fasteners into work surface only never into materials too hard to penetrate Fig 15 24 Grip tool firmly to maintain control while allowing tool to recoil away from work surface as fastener is driven In Contact Actuation Mode if safety element is allowed to recontact work surface before trigger is released an unwanted fastener will be fired 25 Do not drive fasteners on top of other fasteners or with the tool at too steep an angle the fasteners can ricochet causing perso
16. pply to you This warranty gives you specific legal rights and you may also have other legal rights which vary from state to state 12 PORTER CABLE DELTA SERVICE CENTERS CENTROS DE SERVICIO DE PORTER CABLE DELTA CENTRE DE SERVICE PORTER CABLE DELTA Parts and Repair Service for Porter Cable Delta Power Tools are Available at These Locations Obtenga Refaccion de Partes o Servicio para su Herramienta en los Siguientes Centros de Porter Cable Delta Locations o vous trouverez les pi ces de rechange n cessaires ainsi qu un service d entretien ARIZONA Tempe 85282 Phoenix 2400 West Southern Avenue Suite 105 Phone 602 437 1200 Fax 602 437 2200 CALIFORNIA Ontario 91761 Los Angeles 3949A East Guasti Road Phone 909 390 5555 Fax 909 390 5554 San Leandro 94577 Oakland 3039 Teagarden Street Phone 510 357 9762 Fax 510 357 7939 COLORADO Arvada 80003 Denver 8175 Sheridan Blvd Unit S Phone 303 487 1809 Fax 303 487 1868 FLORIDA Davie 33314 Miami 4343 South State Rd 7 441 Unit 107 Phone 954 321 6635 Fax 954 321 6638 Tampa 33609 4538 W Kennedy Boulevard Phone 813 877 9585 Fax 813 289 7948 GEORGIA ILLINOIS Addison 60101 Chicago 400 South Rohlwing Rd Phone 630 424 8805 Fax 630 424 8895 Woodridge 60517 Chicago 2033 West 75th Street Phone 630 910 9200 Fax 630 910 0360 MARYLAND Elkridge 21075 Baltimore 7397 102 Wash
17. screws Tighten screws tool or in trigger area Worn or damaged Install Overhaul Kit o rings or seals 11 2 Tool does nothing or operates sluggishly Inadequate air supply Inadequate lubrication Worn or damaged o rings or seals Verify adequate air supply Put 5 or 6 drops of oil into air inlet Install Overhaul Kit 3 Air leak near bottom of tool Loose screws Worn or damaged o rings or bumper Tighten screws Install Overhaul Kit 4 Tool jams frequently Incorrect fasteners Damaged fasteners Magazine or nose Verify approved fasteners of correct size Replace w undamaged fasteners Tighten screws screws loose Magazine is dirty Driver is worn or damaged Clean magazine Install DRIVER Maintenance Kit Contact a Porter Cable Service Facility ACCESSORIES A complete line of accessories is available from your Porter Cable e Delta Supplier Porter Cable e Delta Factory Service Centers and Porter Cable Authorized Service Stations Please visit our Web Site www porter cable com for a catalog or for the name of your nearest supplier 5 Other NITO since accessories other than those offered by Porter Cable Delta have not been tested with this product use of such accessories could be hazardous For safest operation only Porter Cable e Delta recommended accessories should be used with this product PORTER CABLE LIMITED ONE YEAR WARRANTY Porter Cable w
18. t air blast will be directed away from the operator The exhaust deflector provides seven detented positions for directing the exhaust blast away from the operator Grasp the deflector and rotate it to the desired position for the current application FASTENER GUIDE A Fastener Guide A Fig 23 and 24 is factory installed on Model FN250A The Guide is held in place with a bolt and nut B Fig 23 and 24 The Fastener Guide must be used whenever driving fasteners that are less than 11 long The Fastener Guide must be removed when driving fasteners that are 11 2 or more in length When not in use the fastener guide may be stored by attaching it to the rear bracket as shown in Fig 25 OPERATING INSTRUCTIONS USING THE TOOL Complete all steps of PREPARING THE TOOL before using the tool To fire grip tool firmly position nose of tool onto work surface push forward on tool to depress safety and squeeze trigger to fire a fastener This trigger fire method provides the most accurate fastener placement This tool is shipped from the factory with a restrictive fire trigger that only allows the tool to be fired this way and is less likely to fire an unwanted fastener An alternate bottom fire trigger is available The bottom fire trigger allows the tool to be fired in two different ways 1 The tool can be fired using the trigger fire method described above OR 2 Grip tool firmly depress
19. t all problems before placing the tool back in use Wipe tool clean and inspect for wear or damage Use non flammable cleaning solutions to wipe exterior of tool only if necessary DO NOT SOAK tool with cleaning solutions Such solutions can damage internal parts Inspect trigger and safety mechanism to assure system is complete and functional no loose or missing parts no binding or sticking parts Keep all screws tight Loose screws can cause personal injury or damage tool If tool is used without an in line oiler place 5 or 6 drops of Porter Cable Air Tool Oil into the air inlet of the tool at the beginning of each workday SERVICE AND REPAIRS All quality tools will eventually require servicing or replacement of parts due to wear from normal use These operations should ONLY be performed by either an AUTHORIZED PORTER CABLE SERVICE STATION or a PORTER CABLE DELTA FACTORY SERVICE CENTER All repairs made by these agencies are fully guaranteed against defective material and workmanship We cannot guarantee repairs made or attempted by anyone other than these agencies Should you have any questions about your tool feel free to write us at any time In any communications please give all information shown on the nameplate of your tool model number type serial number etc TROUBLESHOOTING NINA Disconnect tool from air supply before performing any Service Procedure SYMPTOM PROBLEMS SOLUTIONS 1 Air leak near top of Loose
20. ure which potentially exceeds 200 PSI 13 7 BAR e Only connect tool to air supply hose with a coupling that automatically removes all pressure from the tool when the coupling is disconnected e Disconnect tool from air supply before performing maintenance clearing a jammed fastener leaving work area moving tool to another location or handing the tool to another person PREPARING THE TOOL 1 After reading and understanding this entire manual connect tool to air supply Fig 18 7 Never point tool at yourself or others Always connect tool to air supply before loading fasteners Fig 18 Do not load fasteners with trigger or safety depressed Only use approved Porter Cable fasteners Operator and others in work area MUST wear safety glasses with side shields Always wear ANSI Z87 1 approved safety glasses and ANSI 3 19 approved hearing protection when preparing or operating the tool e Never use a tool that is leaking air has missing or damaged parts or requires repair 2 Pull follower A Fig 19 all the way to the rear until it latches 3 Insert a strip of approved fasteners see Fig 20 Orient fasteners with points down Slide fasteners forward to the front of the magazine The magazine will hold two full strips of fasteners 4 Depress follower release lever A Fig 21 allowing the follower to slide forward against the fasteners 5 Adjust directional exhaust deflector A Fig 22 so that the exhaus
Download Pdf Manuals
Related Search