Polaroid ADS-2000 User's Manual
Contents
1. Docking jack For connection with a portable DVD player Displav Panel Display Panel Drawin DVD status indicator AV status indicator TV status indicator Alarm indicator Hour or character indicators Minute or character indicators PM time indicator AM time indicator Di 0E e 0 e Rear Panel amp Side Panel Rear Panel Drawing 1 ANT INPUT jack Connects to external antenna to receive the TV program in TV mode 2 L R AUDIO OUT jack Output the audio signal to external equipment such as amplifiers etc 3 VIDEO OUT jack Output the video signal to external equipment such as monitors etc 4 L R AUDIO IN jack Connects to external audio signal source 5 VIDEO input jack Connects to external video signal source 6 DC 12V input jack Connects to the AC adapter 7 Main Power Switch Side Panel Drawing 1 Speakers output high quality stereo sound 2 Release buttons Slide these buttons to release the portable DVD player from the Docking Station See page 12 Remote Control Preparation Refer to the drawing and take out the empty battery receptacle 4 Insert the battery into the receptacle Make sure the polarity matches the marks inside the component IN Insert the receptacle into the remote control Using Of Remote Control Point the remote control towards the main unit when operating The remote control works best at a distance less than 7m and at an angle of u2. button on the remote control to switch to TV mode _15 System Connections Connecting To the Power Adapter This unit is powered via the switching power adapter supplied 1 Connect the AC adapter to jack marked with DC 12V IN on the rear panel of the unit Plug the other end of the power cord to the grounded electrical socket When not using the unit turn off the power of the unit first and then unplug the power supply to prevent malfunctions 16 TV Setup Basic Operation Connect the antenna to the antenna jack on the rear panel After connecting the antenna connect the power supply cord If the player is in standby mode press the POWER button on the front panel to turn on the power Press the TV button on the remote control to shift to TV mode Press the v buttons on the remote control to select the desired channel or press the number buttons to select your desired channel Some preferences can be preset LCD Setup Press the MENU button once on the remote control to enter LCD setup menu and screen display as shown Language English Brightness 31 Color 30 Contrast 30 Default Go To LCD Setup Use the W A buttons to select the item you want to set Use the gt lt buttons to adjust or select Use the W A buttons to select the Language press the gt buttons to select English French or Spanish for OSD language To restore a setting to the original value use the V A buttons to select
3. cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 15 Unplug the apparatus during lightning storms or when unused for long periods of time 16 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Oso a Ne Accessories Accessories list Audio Video Cable Remote Control Note accessories and their parts numbers are subject to change without prior notice Features The Docking Station is designed for connecting to a compatible portable DVD player It features an electrical connection interface that enables the portable DVD to effectively serve as a desktop DVD It is integrated with connectors for peripheral devices to eliminate complicated connections and save valuable space around the unit With the Docking Station you can enjoy the expansion possibilities of desktop DVD with the portability of a portable DVD Multiple Mode e DVD e TV e External Audio amp Video mode AV Input amp AV Output A V input and output extend the connections for a portable DVD player Switching Power Adapter Automatically adapts to the voltage required TV Functions e Clear TV signal reception e Search
4. Clock sign on the top of the menu then press the button to enter the LCD setup menu press the button to return to the video setup menu Press the MENU buiton to exit the setup Timer Use the gt lt 4 direction buttons to select ON or OFF This function allows you to set the start time and end time of the desired signal source No matter what mode the unit is in it will automatically start the playback of the desired signal source Select ON to activate the function select OFF to disable the function 19 TV Setup Power on To set the playback start time of the signal source use number buttons to input the desired start time in sequence of hour minute Press the gt direction buttons to shift between AM and PM Press the ENT button to confirm Power off To set the playback end time of the signal source use number buttons to input the desired time in sequence of hour minute Press the gt lt direction buttons to shift between AM and PM When the playback of the signal source is over the player will enter standby mode Press the ENT button to confirm Alarm To set the alarm time use number buttons to input the desired start time in sequence of hour minute Press the gt lt direction buttons to shift between AM and PM Press the ENT button to confirm Clock To set the clock time use number buttons to input the desired start time in sequence of hour minute Press the gt direction buttons to shift betw
5. Default then press the buttons to confirm the change Press the V A buttons to highlight the LCD sign on the top of the menu then press gt button on the remote control to enter TV Setup menu Press the MENU button to exit the setup TV Setup Press the MENU button and display the setup menu press the gt lt buttons to select the TV sign the screen will display as below EE i TV Setup Use the W A buttons to select the item you want to set Use the gt lt buttons to select the item and enter it Press the W A buttons to highlight the TV sign on the top of the menu then press the gt button to enter the Video setup menu press the button to return to the LCD setup menu Press the MENU button to exit the setup System Use the gt buttons to select TV system Secam L L Pal D K Pal B G Pal Channel Use the gt lt buttons to change the channel You can select from channels 1 to 125 Skip When the button is pressed to turn the function ON it will skip the current channel Press V A to select channels When the button is used to turn the function OFF it will play the channels in sequence when selecting under normal playback status Blue Screen This function is only available in no signal input mode Use the gt buttons to turn the function ON or OFF Fine Tuning Use the V A buttons to select Fine Tuning and then press the gt buttons to tune forward or backward from the current cha
6. Docking Station ADS 2000 User s Manual 20060623 Table of Contents Important Safety Instruction 3 Accessories 5 Features eaea aA ee nnn nnn EE 6 Front View 7 Display Panel 8 Rear Panel amp Side Panel 9 Remote Control 10 Attaching amp Detaching Portable DVD player 13 System Connections 14 TV Setup 17 AV Setup 21 Troubleshooting 24 Specifications 25 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un insulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric to persons The exclamation point within an equilateral triangle is intended to aler
7. cking Station power is on Make sure the portable DVD player is properly connected with the Docking Station If not attach the DVD player again See page12 Make sure the SOURCE mode has been switched to the DVD mode Make sure the SOURCE mode has been switched to the TV mode Make sure the portable DVD player is properly connected with the Docking Station If not attach the DVD player again See page 12 Make sure the TV cable is firmly connected with the Docking Station Make sure the TV channels have been programmed with the Auto Memory See page17 Make sure the video type of the AV signal source is PAL SECAM Make sure system connection is correct Make sure there are no obstructions between the remote control and the player Make sure the remote control is pointing at the Docking Station s remote receiver Make sure battery is inserted correctly Replace weak battery oy This unit is compatible with all PDM series players with Docking Jack AC10OV 240V 50 60H TV Type PAL SECAM Weight About 0 75 kg DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE For service support and warranty information visit www polaroid com Polaroid and Polaroid and Pixel are trademarks of Polaroid Corporation Waltham MA USA T
8. een AM and PM Press the ENT button to confirm Note The function is active as long as the unit is continuously supplied with power The unit will automatically play the selected input signal at the set start time and enter standby mode at the set end time each day 20 AV Setup L AV Function The docking station has additional AV input and output When an AV source is connected press the AV1 or AV2 button on the remote control to enter external AV mode LCD Setup Press the MENU button once on the remote control to enter LCD setup menu and screen display as shown LCC dA Language English Brightness 31 Color 30 Contrast 30 Default Go To LCD Setup Use the V A buttons to select the item you want to set Use the gt lt buttons to adjust or select Use the W A buttons to select the Language press the gt buttons to select English French or Spanish for OSD language To restore a setting to the original value use the V A buttons to select Reset then press the buttons to confirm the change Press the V A buttons to highlight the LCD sign on the top of the menu then press gt button on the remote control to enter Video Setup menu Press the MENU button to exit the setup Video Setup Press the MENU button and display the setup menu press the gt lt buttons to select the Video setup sign the third sign the screen will display as below Video 1 DVD Video 2 TV Video 3 AV1 Video 4 AV2 Go To S
9. elect Video Da AV Setup _ 3 Use the V A buttons to select press the gt buttons to enter the select video mode Press the V A buttons to highlight the video sign on the top of the menu then press the gt button to enter the Clock menu press the button to return to the LCD setup menu Press the MENU button to exit the setup Clock Setup Press the MENU button and display the setup menu press the lt 4 buttons to select the clock sign the screen will display as below L L FE Timer ON Power On 08 21AM Power Off 08 56AM Alarm 05 05PM Clock 03 36PM Go To Clock Setup Use the W A buttons to select the item you want to set Use the gt buttons to enter the item or to select Press the W A buttons to highlight the Clock sign on the top of the menu then press the gt button to enter the LCD setup menu press the lt button to return to the video setup menu Press the MENU button to exit the setup Timer Use the gt lt 4 direction buttons to select ON or OFF This function allows you to set the start time and end time of the desired signal source No matter what mode the unit is in it will automatically start the playback of the desired signal source Select ON to activate the function select OFF to disable the function Power on To set the playback start time of the signal source use number buttons to input the desired start time in sequence of hour minute Press the direction buttons to sh
10. for TV channels automatically e Automatically memorize the channels Clock Function Displays the time even if in stand by mode or if there is no DVD player attached Timer will turn the docking station and attached DVD player on and off at desired times Designed with alarm function Front View Front Panel Drawing siero N 10 11 12 13 Power Indicator in standby mode it is red when in operation it turns green Remote Sensor Receives remote control signal for operation Display panel Displays the time and status SOURCE button Press to shift among DVD TV AV1 and AV2 mode Menu Press to adjust the Picture standard including Brightness Contrast Color Language or Reset all items A CH W CH button Press to select items in the setup menu Press to select channels in TV mode Press to adjust the value when setting the time on the display panel lt VOL gt VOL buttons Press to select items in the setup menu Press to adjust the value in the picture setup menu Press the gt VOL button to enter the selection Press the lt VOL button to exit the selection MUTE button Press to mute off the speakers output 16 9 4 3 button Press to change the screen aspect ratio between 16 9 and 4 3 POWER button Press to enter or exit the STANDBY mode Spring Tab Used to spring the portable DVD player up when it is removed See page12 Fixing hooks Fix the portable DVD player on the Docking Station See page12
11. he number button and press the ENT button or wait 2 seconds to confirm Two digit number press the first number and input the second number in 2 seconds Three digit number press the first number then input the second number in 2 seconds and input the third number in the next 2 seconds CH DISP In TV mode display the current channel information P MODE button Press to change the picture modes Bright Soft or Nature LAST button Press to back the last channel that you watch in TV mode 16 9 4 3 button Press to change the screen aspect ratio between 16 9 and 4 3 VOL button Press to adjust the volume Note When the portable DVD player is connected to the docking station the mute button on the docking station remote control mutes the docking station only If you want to turn off the volume of the portable DVD player adjust the volume control on the portable DVD player to its minimum volume level pe Attaching amp Detaching Portable DVD plaver Note Do not connect the power cord until all other connections have been made Attaching Portable DVD player to Docking Station Follow the steps below to attach the portable DVD player to the Docking Station It is advised to attach the rechargeable battery to the portable DVD player before this connection Step1 Center the player on the Docking Station and line up the 4 slots on the bottom of the player with the 4 fixing hooks on the Docking Station Step2 Press the
12. ift between AM and PM Press the ENT button to confirm Power off To set the playback end time of the signal source use number buttons to input the desired time in sequence of hour minute Press the gt direction buttons to shift between AM and PM When the playback of the signal source is over the player will enter standby mode Press the ENT button to confirm Mo AV Setup o Alarm To set the alarm time use number buttons to input the desired start time in sequence of hour minute Press the lt 1 direction buttons to shift between AM and PM Press the ENT button to confirm Clock To set the clock time use number buttons to input the desired start time in sequence of hour minute Press the 1 direction buttons to shift between AM and PM Press the ENT button to confirm Note The function is active as long as the unit is continuously supplied with power The unit will automatically play the selected input signal at the set start time and enter standby mode at the set end time each day Note Under AV mode if there is no signal the LCD screen will be blue screen In the DVD mode the setup menus are the same as the menus in the AV mode you can go on with the setups according to the operations in the AV mode DI Troubleshooting The attached portable DVD player does not work There is no TV function There is no picture or picture is unsteady The remote control does not work Make sure the Do
13. nnel Auto Memory Use the V A buttons to select Auto Memory press the gt gt button to enter auto memory mode m Searching ae ekib Channel 025 Exit Waiting The auto memory will take a few minutes The unit will search channels from the lowest channel to the highest channel in the standard channel list When tuning operations are complete the unit will exit and store the channels by sequence in the memory During tuning press the button to exit the auto memory 18 TV Setup Video Setup Press the MENU button and display the setup menu press the buttons to select the Video setup sign the third sign the screen will display as below Video 1 DVD Video 2 TV Video 3 AV1 Video 4 AV2 Go To Select Video Use the V A buttons to select press the gt lt buttons to enter the select video mode Press the W A buttons to highlight the video sign on the top of the menu then press the gt button to enter the Clock menu press the button to return to the TV setup menu Press the MENU button to exit the setup Clock Setup Press the MENU button and display the setup menu press the lt 4 buttons to select the clock sign the screen will display as below Timer ON Power On 08 21AM Power Off 08 58AM Alarm 05 05PM Clock 03 36PM Go To Clock Setup Use the V A buttons to select the item you want to set Use the gt lt buttons to enter the item or to select Press the W A buttons to highlight the
14. p to 60 to the front of the unit No obstacles may stand in the way between remote control and infrared sensor The batteries normally last for about six months This depends on how often and for what operations the remote control is used If the remote control unit fails to work even when it is operated near the player replace the battery If the remote control is not used for a long period of time remove the battery from the compartment to prevent damage by leakage 10 Remote Control Remote Control Drawing POWER button Press to access to or exit the STANDBY mode TV button Press to enter TV mode DVD button Press to enter DVD mode AV1 button Press to shift to external AV1 input mode AV2 button Press to shift to external AV2 input mode sif Remote Control 6 10 11 12 13 14 15 16 dq pav Press to select menu items or settings Press 4 buttons to adjust value in the picture setup menu Press v buttons to select channels forward and backward in TV mode Or press to adjust the value of time when setting time on the display panel Press to enter the selection Press 4 to exit the selection ENT button Press to confirm selections MENU button Press to access the menu of current mode CH Press to select channels in TV mode MUTE button Press to mute off the speakers output 0 9 number buttons Select numbers by pressing these buttons One digit number press t
15. portable DVD player down gently with two hands and the fixing hooks will fix the portable DVD player on the Docking station from moving Detaching Portable DVD player from Docking Station Step1 Slide the two release buttons toward the front of the Docking Station to unlock the fixing hooks The five spring tabs will spring the portable DVD player up Step2 Remove the portable DVD player from Docking Station 3 System Connections e Do not connect the power cord until all other connections have been made e Ensure that you observe the color cord when connecting audio and video cables Expand the Connections The following drawing shows a sample of expanding the connections of a portable DVD player with Docking Station After connecting with external AV source by AV jacks please turn on the power of the unit and press the SOURCE button on the front panel to shift to AV1 mode or press the AV1 button on the remote control to shift the mode directly If the AV source is from docking station please press the SOURCE button on the front panel to shift to AV2 mode or press the AV2 button on the remote control to shift the mode directly _14 System Connections Connecting to TV Signal Input Source The unit can be connected to a TV antenna to receive TV programs Connections should be made as follows After connecting the antenna turn on the power of the Docking Station press the SOURCE button on the front panel or the TV
16. product please go to www polaroid com and click on Company or call the customer service number for your country listed in the instruction manual Important Safety Instruction NOTES Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Maintain well ventilated conditions around the product Do not put product on bed sofa or anything that blocks ventilation Install according to the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Read heed and follow all instructions to ensure correct and safe installation and interconnection of the apparatus 10 The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus 11 The mains socket outlet shall be installed near the apparatus and the mains plug shall remain readily operable 12 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 13 Only use attachments accessories specified by the manufacturer 14 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a
17. t the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance CAUTION 1 The product contains a low power laser device In order to ensure the safety of the laser device do not remove any cover and attempt to repair the unit If any service is needed please contact the distributor or its authorized service center 2 To reduce the risk of electric shock do not remove the cover or back No user serviceable parts inside Refer servicing to qualified service personnel Unplug the product from the wall outlet before servicing or when it is unused for a long period of time 3 The manufacturer should not hold responsibility for the damage caused by any substitutions and modifications of the product without authorization from the manufacturer or authorized unit WARNING The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus WEEE This product contains electrical or electronic materials The presence of these materials may if not disposed of properly have potential adverse effects on the environment and human health Presence of this label on the product means it should not be disposed of as unsorted waste and must be collected separately As a consumer you are responsible for ensuring that this product is disposed of properly To find out how to properly dispose of this
Download Pdf Manuals
Related Search