Pioneer DJ Equipment serato DJ User's Manual
Contents
1. Za FRUIT aon es My a NEEDLE SEARCH During loop roll playback normal playback with the original rhythm con tinues in the background When loop roll playback is canceled playback resumes from the position reached in the background at the point loop roll playback was canceled e This function cannot be used with tracks that have been analyzed with Serato DJ Intro To use this function with such tracks reanalyze the tracks with Serato DJ 1 Press the NEEDLE SEARCH ROLL pad while pressing the SHIFT button A loop roll with the number of beats assigned to the point at which the pad is pressed is played Playback continues in the background while the loop roll is playing e During loop roll playback the number of beats of the cur rently playing loop roll can be changed by turning the AUTO LOOP GRID SLIDE control 2 Release your finger from the NEEDLE SEARCH ROLL pad Loop roll playback is canceled and playback resumes from the position reached in the background Recording 1 Select the channel to be recorded Perform this operation on the computer s screen e MIX The sound output from the MASTER OUT 1 and MASTER OUT 2 terminals can be recorded e AUX The sound of the MIC AUX channel can be recorded alone Correction HOT CUE SAMPLER buttons 1 5 Hot cue mode Press Use this to set play and call out hot cues SHIFT press Delete the hot cue set for that butt2. 5 Hot cue mode Press Use this to set play and call out hot cues SHIFT press Delete the hot cue set for that button Using hot cues p 19 Sample mode Press When one of HOT CUE SAMPLER buttons 1 to 3 is pressed play back of the sample starts The bank switches each time HOT CUE SAMPLER button 4 or 5 is pressed SHIFT press When one of HOT CUE SAMPLER buttons 1 to 3 is pressed play back of the sample stops Using hot cues p 19 Using the sampler function 3 Press HOT CUE SAMPLER button 4 or 5 Each time the button is pressed the sampler s SP 6 bank switches The sampler has four banks A B C and D and each bank has six slots Buttons 4 and 5 on deck 1 are assigned to banks A and B buttons 4 and 5 on deck 2 to banks C and D Using the sampler function 5 Press one of HOT CUE SAMPLER buttons 1 to 3 on deck 1 or one of HOT CUE SAMPLERI buttons 1 to 3 on deck 2 The sound of the slot assigned to the button that was pressed is played When a HOT CUE SAMPLER button is pressed while a sample is play ing playback returns to the beginning of the sample and continues e When one of HOT CUE SAMPLER buttons 1 to 3 is pressed while pressing the SHIFT button the sound of the currently playing slot stops Using the Loop Roll function This function plays a loop with the number of beats assigned to the NEEDLE SEARCH ROLL pad continually while the pad is being pressed
3. Serato DJ Edition Pioneer DDJ S1 Operating Instructions Errata e We aplologize for the following errors in the Operating Instructions Please note the following corrections Page 10 Error EJ Rotary selector Turn The cursor in the library or on the CRATES panel moves up and down Press The cursor moves between the CRATES panel and library each time the rotary selector is pressed If there are sub crates in the item currently selected in the CRATES panel that crate opens The cursor on the Files panel moves to a lower layer The cursor on the Browse panel moves to the next category e For details on the CRATES panel see Importing tracks p 17 SHIFT press The panel display switches each time the button is pressed Panel display off Files Browse PREPARE History Panel display off LOOP SELECT GRID LOCK button Press The loop slot switches Loop Slot When loops are stored in loop slots ahead of time they can be called out later Up to eight loops can be set in the loop slots When you select the number of the loop slot at which you want to store the loop then set a loop the loop is automatically stored When a new loop is set after a loop has been stored the loop is overwritten and the slot is updated When the number of the loop slot whose loop you want to call out is selected and the LOOP OUT GRID TAP button is pressed while pressing the SHIFT button reloop p
4. in loop slots ahead of time they can be called out later Up to eight loops can be set in the loop slots When you select the number of the loop slot at which you want to store the loop then set a loop the loop is automatically stored When a new loop is set after a loop has been stored the loop is overwritten and the slot is updated When the number of the loop slot whose loop you want to call out is selected and the RELOOP EXIT button is pressed reloop playback of the stored loop starts SHIFT press Sets so that the entire beat grid cannot be edited For instructions on displaying the beat grid see the Serato DJ soft ware manual Crossfader curve selector switch This switches the crossfader curve characteristics ZX Linear is selected for the crossfader curve ZX Power is selected for the crossfader curve THRU Choose this when you do not want to use the crossfader e Crossfader settings are also needed on the application by turning the dials to set slow or fast as well as switching the curves on the controller Please set the Curve value from SETUP menu Mixer CROSSFADER The default value is set to CENTER Crossfader Curve Application Settin Selector Switch rs i CENTER CENTER 2013 PIONEER CORPORATION All rights reserved PIONEER CORPORATION 1 1 Shin ogura Saiwai ku Kawasaki shi Kanagawa 212 0031 Japan HOT CUE SAMPLER buttons 1
5. layback of the stored loop starts SHIFT press Sets so that the entire beat grid cannot be edited For instructions on displaying the beat grid see the Serato DJ soft ware manual Crossfader curve selector switch This switches the crossfader curve characteristics ZX I Set here for a curve that rises steeply When the crossfader moves away from either the left or right edge the sound is immedi ately output from the opposite side ZN I Set here for a curve that rises steeply THRU Choose this when you do not want to use the crossfader Correction EJ Rotary selector Turn The cursor in the library or on the CRATES panel moves up and down Press The cursor moves between the CRATES panel and library each time the rotary selector is pressed If there are sub crates in the item currently selected in the CRATES panel that crate opens e The function of expanding and collapsing crates with sub crates cannot be controlled from this unit with Serato DJ Ver 1 2 The cursor on the Files panel moves to a lower layer The cursor on the Browse panel moves to the next category e For details on the CRATES panel see Importing tracks p 17 SHIFT press The panel display switches each time the button is pressed Panel display off Files Browse PREPARE History Panel display off LOOP SELECT GRID LOCK button Press The loop slot switches Loop Slot When loops are stored
6. on Using hot cues p 19 Sample mode Press When one of HOT CUE SAMPLER buttons 1 to 5 is pressed play back of the sample starts To switch between the different banks click on the A B C or D buttons of SP 6 Sample Player on the application SHIFT press When one of HOT CUE SAMPLER buttons 1 to 5 is pressed play back of the sample stops Using hot cues p 19 Using the sampler function 3 Click on the buttons in the SP 6 Sampler Player panel to switch the banks The sampler has four banks A B C and D and each bank has six slots Using the sampler function 5 Press one of HOT CUE SAMPLER buttons 1 to 5 on deck 1 or one of HOT CUE SAMPLERI buttons 1 to 5 on deck 2 The sound of the slot assigned to the button that was pressed is played When a HOT CUE SAMPLER button is pressed while a sample is play ing playback returns to the beginning of the sample and continues e When one of HOT CUE SAMPLER buttons 1 to 5 is pressed while pressing the SHIFT button the sound of the currently playing slot stops Using the Loop Roll function This function plays a loop with the number of beats assigned to the NEEDLE SEARCH ROLL pad continually while the pad is being pressed fir A CU ely NEEDLE SEARCH During loop roll playback normal playback with the original rhythm con tinues in the background When loop roll playback is canceled playback resumes from the posi
7. tion reached in the background at the point loop roll playback was canceled e This function cannot be used with tracks that have been analyzed with Serato DJ Intro To use this function with such tracks reanalyze the tracks with Serato DJ 1 Press the NEEDLE SEARCH ROLL pad while pressing the SHIFT button A loop roll with the number of beats assigned to the point at which the pad is pressed is played Playback continues in the background while the loop roll is playing e During loop roll playback the number of beats of the cur rently playing loop roll can be changed by turning the AUTO LOOP GRID SLIDE control 2 Release your finger from the NEEDLE SEARCH ROLL pad Loop roll playback is canceled and playback resumes from the position reached in the background e The number of beats of the currently playing loop roll cannot be changed by sliding your finger on the Needle Search Pad Recording 1 Select the channel to be recorded Perform this operation on the computer s screen e MIX The sound output from the MASTER OUT 1 and MASTER OUT 2 terminals can be recorded
Download Pdf Manuals
Related Search