Philips 7FF1WD User's Manual
Contents
1. PHILIPS a pS Olo crame Firmware A1 51 Update Procedure Document Release date Jul 13 2006 Reason for software update For 7FF1WD models Software version A1 51 will provide the following improvements Extend the SD card support from 1GB to 2GB Increasing maximum photos support number from 4096 to 10240 Important notice before updating The software update process will remove all photos currently stored on Photo Frame Please make sure all photos on Photo Frame are properly backed up before updating What is needed before software update 1 Check your current Photo Frame software version gt Make sure Photo Frame is ON gt Press the 3rd key from the left on the rear of Photo Frame gt General settings menu will appear gt Use the key behind the Down arrow to highlight Status gt Current Software version will appear on the right column gt If the software version is earlier tha 1 51 this update is applicable to your Photo Frame Prepare a supported memory card If your software version is 1 47 or earlier than 1 31 only Secure Digital SD type of memory card can be supported during software update All other versions support Secure Digital SD Memory Stick MS Compact Flash CF or Multimedia Card MMC types of memory cards PC with Internet access or downloaded Photo Frame software on PC After downloading Unzip all the software file and select correct software update ZIP file 7 Software version 1 47 or earlier tha2. ave been changed by the update Solution Unzip the files again from the PC to the supported memory card 3 Make sure Photo Frame is properly powered during the entire update process
3. n 1 31 Software version later that 1 31 but not 1 47 7FFEWD WD_VAI1 51_SD zip WD_VAI1 51_AllTypeCard zip Unzip all the software update files 6 files in total onto the root directory of the supported memory card Make sure Photo Frame is OFF and properly connected to DC power Important Please use DC power NOT battery power to avoid a possible power loss that could cause permanent damage to your Photo Frame Insert the supported memory card into Photo Frame Power on Photo Frame the software update will start automatically During the update DO NO remove the memory card or make new connections Note It may take up to 1 minute before the updating process begin The screen will remain black during this period The Software update is complete when you see one of the following messages on Photo Frame Photos stored on your memory card Or if you memory card does not contain photos No photos on external memory After software update is complete remove the memory card Restart Photo Frame Congratulations You have successfully updated your Photo Frame You may remove the software update files from the memory card now Troubleshooting In the event your software update is not successful please make sure 1 Your memory card is supported by current software 2 All files are correctly unzipped to the root directory of the supported memory card Note If you have previously updated another Photo Frame with this memory card some files may h
Download Pdf Manuals
Related Search