Philips HSB4383/12 User's Manual
Contents
1. EN 37 English 2008 Koninklijke Philips Electronics N V All rights reserved PHILIPS2. Audio setup On Audio Setup Page you can set the following options HDMI Audio When you connect this apparatus and TV with an HDMI cable select the audio output setting for this connection e On the sound is output through both your TV and this apparatus If the audio format on the disc Is not supported it is downmixed to two channel sound Linear PCM e Off disable audio output from the TV The sound is only output through this apparatus Night Mode Make loud sound level softer and soft sound level louder so that you can watch the DVD movies at a low volume without disturbing others e Off enjoy surround sound with its full dynamic range e On enjoy quiet viewing at night DVDs only Video setup On Video Setup Page you can set the following options TV Type Change this setting if the video does not appear correctly By default this setting matches the most common setting for TVs in your country e PAL For TV with PAL color system e NTSC For TV with NTSC color system e Multi For TV that is compatible with both PAL and NTSC TV Display The TV format determines the aspect ratio of display according to the type of TV you have connected 4 3 Pan Scan PS 4 3 Letter Box LB 16 9 Wide Screen e 4 3 Pan Scan For 4 3 screen TV full height display with the trimmed sides e 4 3 Letter Box For 4 3 screen TV wide screen dis
3. HINN PHILIPS Caution e Open the disc compartment e Use of controls or adjustments or performance of Pil procedures other than herein may result in hazardous radiation exposure or other unsafe operation Start or pause play oi Disc compartment 4 SOURCE Remote control sensor e _ Select a source 41 Display panel 2 MP3 LINK Display current status e Jack for an external audio device D BS G O e Hab socket e Turn on the unit or switch to standby mode ON e Stop play e Erase a preset radio station 5 VOL e Adjust volume 6 w e Skip to the previous next title chapter track e Select a preset radio station 10 EN Overview of the remote control OS SURROUND TREBLE Geren POS oom oon PROGRAM PHILIPS d HOME THEATER nm J A e Turn on the unit or switch to standby mode Source selection keys e Select a source OPTIONS e Access or exit the system setup menu A V e For menus
4. 1 Press the numeric keys to enter 0000 or your last set password at Old Password field 2 Enter the new password at New Password field 3 Enter the new password again at Confirm PWD field 4 Press OK to exit the menu Note e Ifyou forget the password enter 0000 before you set a new password DivX Subtitle Select a character set that supports the DivX subtitle Standard English Irish Danish Estonian Finnish French German Italian Portuguese Luxembourgish Norwegian Bokmal and Nynorsk Spanish Swedish Turkish Central Polish Czech Slovak Albanian Europe Hungarian Slovene Croatian Serbian Latin script Romanian Cyrillic Belarusian Bulgarian Ukrainian Macedonian Russian Serbian Greek Greek Hebrew Hebrew Note e Ensure that the subtitle file has the exact same file name as the movie file If for example the file name of the movie is Movie avi then you will need to name the text file Movie sub or Movie srt Version Info Display the software version of this apparatus Tip e This information is required when you want to find out if a newest software version is available at the Philips website that you may download and install on this apparatus Default Resets all the settings of this apparatus to factory default except for Disc Lock Password and Parental settings EN 27 English 7 Tune to
5. e Sports Gaming e Lounge Drama e Night Select surround sound effect DVS Dolby Virtual Speaker technology creates a highly compelling 5 1 channel listening experience from as few as two speakers It is an ideal entertainment solution for locations where space for multiple speaker setup is limited 1 During play press SURROUND to turn on off surround sound effect Adjust treble bass level 1 Press TREBLE or BASS 30 EN 2 Within 5 seconds press lt 1 to set the level for high tones treble or low tones bass Mute sound 1 During play press s to mute unmute sound 9 Other features Connect other devices Listen to an audio player You can listen to an audio player through this unit 1 Connect the audio player For audio players with red white audio output sockets Connect a red white audio cable not supplied to the AUX IN L R sockets and to the audio output sockets on the audio player For audio players with headphone sockets Connect a 3 5mm audio cable not supplied to the MP3 LINK socket and to the headphone socket on the audio player For audio players with optical sockets Connect an optical cable not supplied to the OPTICAL IN socket and to the optical output socket on the audio player Select the AUDIO SOURCE or MP3 LINK source Start play on the audio player EN 31 English 10 Product information Note e Product information is subject to
6. press INFO repeatedly to display play information Zoom in out image 1 During video picture play press ZOOM repeatedly to zoom in out the image e When the image is zoomed in you can press lt P A VY to pan through the image Change the audio channel Note e This feature is only available for VCD DivX play 1 During play press AUDIO repeatedly to select an audio channel available on the disc e Mono Left e Mono Right e Stereo Picture view options Start slideshow of pictures 1 During play press OPTIONS L The thumbnails of 12 pictures are displayed 2 Select a file then press PH to start slideshow play e To go to previous or next screen display press WK e To select a picture press the cursor buttons e To display the selected photo only press OK Rotate picture 1 During play press 4 to rotate the picture anti clockwise clockwise Start musical slideshow You can play MP3 WMA music files and JPEG photo files simultaneously to create musical slideshow The MP3 WMA and JPEG files must be stored on the same disc or USB device T Play MP3 WMA music 2 Navigate to the photo folder album and press PEE to start slideshow play Ly Slideshow begins and continues till the end of the photo folder or album Ly Audio continues to play till the end of the disc L gt To return to the menu press MENU BACK To stop slideshow play press E A Ww To stop music
7. FM radio stations Ensure that you have connected and fully extended the supplied FM antenna Press RADIO Press and hold lt gt lt p gt When the frequency indication starts to change release the button L gt The FM tuner tunes to a station with strong reception automatically AWN 5 Repeat steps 3 4 to tune to more stations To tune to a weak station Press lt P gt PP repeatedly until you find optimal reception Program radio stations automatically Note You can program a maximum of 20 preset radio stations 1 Press MIR to select a preset number to start programing 2 Press and hold REPEAT PROGRAM for 2 seconds to activate automatic programming L gt AUTO auto is displayed briefly Ly All available stations are programmed in the order of waveband reception strength L gt The last programed radio station is broadcast automatically 28 EN Program radio stations manually Note e You can program a maximum of 20 preset radio stations Tune to a radio station Press REPEAT PROGRAM to activate programming W N Press WK to allocate a number from 1 to 20 to this radio station then press REPEAT PROGRAM to confirm L gt The preset number and the frequency of the preset station are displayed 4 Repeat the above steps to program other stations Note e To overwrite a programmed station store another station in its place Tun
8. Philips offers register your product at www Philips com welcome This DVD Home Theater System is designed to complement your home perfectly Enjoy the DVD Home Theater System with multi channel surround sound and excellent picture quality Introduction With this unit you can e watch video from DVD VCD SVCD or USB devices e enjoy audio from discs or USB devices e view pictures from discs or USB devices e sten to FM radio e Control EasyLink compliant devices through a single remote control e Sync audio output with the video output You can enrich sound output with these sound effects s Surround sound exprience e Preset sound modes The unit supports these media disc formats COMPACT COMPACT COMPACT VE VER NEI DIGITAL AUDIO DIGITAL VIDEO HE ReWritable SUPER VIDEO Ay Plays CC DIVX Sw Vi SUPER AUDIO CD VIDEO R RW You can play DVD discs with the following region codes DVD region code Countries Europe What s in the box Check and identify the contents of your package e Main unit e Speakers x 2 e Digital wireless subwoofer e Power adapter for the main unit e Remote control with batteries e FM wire antenna e AV cable red white yellow e USB extension cable e SCART adapter e Wall mount bracket and screws x4 EN 9 English Overview of the main unit
9. button until you see the blue screen e Press the source button repeatedly on the remote control of your TV Tip e The video in channel is between the lowest and highest channels and may be called FRONT A V IN VIDEO HDMI etc See the TV user manual on how to select the correct input on the TV Select the correct TV system Change this setting if the video does not appear correctly By default this setting matches the most common setting for TVs in your country Press EI OPTIONS Select Video Setup Select TV Type and then press P Select a setting and then press OK e PAL For TV with PAL color system NTSC For TV with NTSC color system WN e Multi For TV that is compatible with both PAL and NTSC 5 To exit the menu press EI OPTIONS Select menu display language Press OPTIONS Select General Setup Select OSD Language and then press P Select a setting and then press OK To exit the menu press E OPTIONS Ui WN Turn on Progressive Scan Progressive scan displays twice the number of frames per seconds than interlaced scanning ordinary TV system With nearly double the number of lines progressive scan offers higher picture resolution and quality Before you turn on this feature ensure that e The TV supports progressive scan signals e You have connected this unit with the TV through component video Turn on the TV Ensure that the TV progressi
10. change without prior notice Specifications Amplifier Rated Output Power Frequency Response Signal to Noise Ratio Aux Input Disc Laser Type Disc Diameter Video Decoding 2X60 120WRMS 20 20000 Hz 3dB gt 6 dB 500mV RMS 20kohm Semiconductor 12cm 8cm MPEG 1 MPEG 2 DivX Video DAC 1 2Bits Signal System PAL NTSC Video Format 4 3 16 9 Video S N gt 48dB Audio DAC 24Bits 96KHz Total Harmonic lt 1 1 kHz Distortion Frequency 4Hz 20kHz 44 1kHz Response 4Hz 22kHz 48kHz 4Hz 24kHz 96kHz S N Ratio gt 67dBA 32 EN Tuner FM Tuning Range 87 5 108MHz Tuning grid 50KHz Sensitivity lt 22 dBf Mono 26dB S N Ratio Search Selectivity gt 28dBf Total Harmonic Distortion lt 3 Signal to Noise Ratio gt 50dB Speakers Speaker Impedance 2x8o0hm 8ohm Speaker Driver subwoofer Speaker Driver woofer Speaker Driver tweeter Sensitivity Subwoofer Woofer Tweeter 8 subwoofer 3 woofer 19mm tweeter gt 84dB m W 4dB m W gt 82dB m W 4dB m VW General information AC power Operation Power Consumption Normal Standby Power Consumption Low Standby Power Consumption Composite Video Output Optical Input HDMI CEC Output USB Direct Dimensions Main Unit W x H x D Speakers Wireless Subwoofer Box W x H x D Weight With Packing Main Unit Speaker Box Wireless Subwoofer Box 220 230V 50
11. e For video discs access or exit the disc menu e For video discs with playback control PBC turn on off PBC AUDIO e ForVCD select stereo mono left or mono right channel e For DVD DivX video select an audio language EN 3 Connect Place the unit 1 Place the unit near to the TV 2 Keep the speakers at the normal listening ear level and directly parallel to the listening area 3 Place the subwoofer at the corner of the room or at least one meter away from the TV e To avoid magnetic interference or unwanted noise never place this apparatus and speakers too close to any radiation devices Never place this unit in an enclosed cabinet Install this unit near the AC outlet where the AC power plug can be easily reached Attach speakers to the main unit 1 Place the main unit on a soft and flat surface e Ensure that the rear side faces upwards 2 Attach the left speaker to the left side of the main unit 3 Repeat step 2 to attach the right speaker 4 Insert the supplied studs into the holes Connect TV Connect video cables With this connection you can watch video from the unit on the TV screen You can select the best video connection that your TV supports e Option 1 Connect through HDMI for a HDMI DVI or HDCP compliant TY EN 13 English e Option 2 Connect through SCART for a standard TV e Option 3 connect through component video
12. is fitted with an approved 13 Amp plug To change a fuse in this type of plug proceed as follows 4 Remove fuse cover and fuse Fix new fuse which should be a BS1362 5 Amp ASTA or BSI approved type G Refit the fuse cover If the fitted plug is not suitable for your socket outlets it should be cut off and an appropriate plug fitted in its place If the mains plug contains a fuse this should have a value of 5 Amp If a plug without a fuse is used the fuse at the distribution board should not be greater than 5 Amp Note The severed plug must be disposed off to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere How to connect a plug The wires in the mains lead are coloured with the following code blue neutral N brown live L 6 EN As these colours may not correspond with the colour markings identifying the terminals in your plug proceed as follows e Connect the blue wire to the terminal marked N or coloured black e Connect the brown wire to the terminal marked L or coloured red s Do not connect either wire to the earth terminal in the plug marked E or e or coloured green or green and yellow Before replacing the plug cover make certain that the cord grip is clamped over the sheath of the lead not simply over the two wires Copyright in the U K Recording and playback of material may require consent see Copyright Act 1956 and The performer s Protection
13. navigate up down e Move an enlarged picture up down e Rotate or invert pictures OK Confirms an entry or selection lt gt lt lt gt gt e For menus navigate left right e Search within a track or disc e Move an enlarged picture left right e Tune to a radio station INFO e For video audio play display information about the current status or the disc e For pictures display a thumbnail view of picture files e For FM radio display RDS clock Wir s Skip to the previous next title chapter track e Select a preset radio station gt II e Start or pause play E e Stop play e Erase a preset radio station TREBLE BASS e Selects treble or bass mode Press lt 4 to set the level for treble or bass Numeric keypad e Select a title chapter track directly e Select a preset radio station directly AUDIO SYNC e Access audio delay setting SOUND e Selects a predefined sound effect EN 11 English 12 ZOOM e For pictures or video zoom in out REPEAT A B e Repeat a specific section within a track disc REPEAT PROGRAM e Selects or turns off repeat or shuffle mode e Program radio stations SUBTITLE s Select DVD or DivX subtitle language SURROUND e Enable disable Dolby Virtual Speakers DVS sound effect A e Adjust volume VC e Mute or restore volume MENU BACK e Return to the previous screen
14. protected material including computer programs files broadcasts and sound recordings may be an infringement of copyrights and constitute a criminal offence This equipment should not be used for such purposes HIGH DEFINITION MULTIMEDIA INTERFACE HDMI and HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC UL TT RA DivX DivX Certified and associated logos are trademarks of DivX Inc and are used under license EN 7 English Official DivX Ultra Certified product Plays all versions of DivX video including DivX 6 with enhanced playback of DivX media files and the DivX Media Format S dts Digital Surround Manufactured under license under U S Patent Hs 5 451 942 5 956 674 5 974 380 5 978 762 6 487 535 amp other U S and worldwide patents issued amp pending DTS and DTS Digital Surround are registered trademarks and the DTS logos and Symbol are trademarks of DTS Inc 1996 2007 DTS Inc All Rights Reserved ae USB The USB IF Logos are trademarks of Universal Serial Bus Implementers Forum inc Q DOLBY DIGITAL PRO LOGIC II Manufactured under license from Dolby Laboratories Dolby Pro Logic and the double D symbol are trademarks of Dolby Laboratories QI DOLBY VIRTUAL SPEAKER Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratorie
15. the connected device is non HDCP compliant or only DVl compatible Audio or subtitle languages cannot be set e The disc is not recorded with sound or subtitles in multiple languages e The audio or subtitle language setting is prohibited on the disc EN 35 English 12 Appendix Mount to a wall Caution e Risk of product damage Always consult professional personnel to safely mount the product to a wall e Risk of injury Ensure that no supply ducts such as gas water or electricity are harmed when you drill the holes What s in the supplied mounting kit B 1 x wall mount bracket for the main unit and speakers 4 x screws What else you ll need e Electric drill e Screwdriver e Pencil 36 EN Mount the main unit and speakers Caution e To find a suitable mounting location make the necessary physical and wireless connections e Mount the main unit and speakers to a solid concrete wall or plaster board wall only You can use the supplied bracket to mount the main unit and speakers to the wall 1 Align the bracket in the chosen location on a wall Use a pencil to mark the drilling positions 2 Drill holes as marked a 3 Secure the wall mount bracket onto the wall with 4 supplied screws 4 Hook the main unit and speakers in place
16. Acts 1958 to 1972 PN Warning e Never remove the casing of this unit e Never lubricate any part of this unit e Place this unit on a flat hard and stable surface e Never place this unit on other electrical equipment e Only use this unit indoors Keep this unit away from water moisture and liquid filled objects e Keep this unit away from direct sunlight naked flames or heat e Never look into the laser beam inside the unit Warning e Where the MAINS plug or an appliance coupler is used as the disconnect device the disconnect device shall remain readily operable Wall mounting of the unit should only be performed by qualified personnel The unit must only be mounted on an appropriate wall bracket and on a wall that can safely hold the weight of the unit Improper wall mounting can result in severe injury or damage Do not attempt to wall mount the unit yourself Notice C This product complies with the radio interference requirements of the European Community This product complies with the requirements of the following directives and guidelines 2004 108 EC 2006 95 EC Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user s authority to operate the equipment Recycling G Your product is designed and manufactured with high quality materials and components which can be recycled and reused When you
17. FIED SERVICE PERSONNEL ess This bolt of lightning indicates uninsulated material within your unit may cause an electrical shock For the safety of everyone in your household please do not remove product covering The exclamation point calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems WARNING To reduce the risk of fire or electric shock this apparatus should not be exposed to rain or moisture and objects filled with liquids such as vases should not be placed on this apparatus CAUTION To prevent electric shock match wide blade of plug to wide slot fully insert Safety Important Safety Instructions Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water OGO 6 Clean only with dry cloth T Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat oi Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer 41 Use only with the cart stand tripod bracket or
18. Hz Main unit SOW Subwoofer 100W lt 4W lt 1W 1 0Vp p 75ohm 0 5Vpp 0 1Vpp 75ohm 1 3a Version 2 0 260 x 140 x 95 mm 310 x 120 x 95 mm 170 x 430 x 340 mm 13 kg 1 kg 2x 0 8 kg 6 kg Supported disc formats e Digital Video Discs DVDs s Video CDs VCDs e SuperVideo CDs SVCDs e Digital Video Discs Rewritable DVD RW e Compact Discs CDs e Picture Kodak JPEG files on CDR W s Diva disc on CD R W e DivX 3 11 4 x and 5 x e WMA m MP3 CD formats ISO 9660 e Max trtle album name 12 characters e Max title number plus album 255 e Hax nested directory 8 levels e Max album number 32 e _Max MP3 track number 999 e Supported sampling frequencies for MP3 disc 32 kHz 44 1 kHz 48 kHz e Supported Bit rates of MP3 disc are 32 64 96 128 192 256 kbps e The following formats are not supported e Files like VMA AAC DLF M3U e PLS WAV Non English Album Title name e Discs recorded in Joliet format e MP3 Pro and MP3 with ID3 tag USB playability information RE USB devices USB flash memory USB 2 0 or USB1 1 e USB flash players USB 2 0 or USB1 1 e memory cards requires an additional card reader to work with this apparatus Supported formats e USB or memory file format FAT12 FAT16 FAT 32 sector size 512 bytes e MP3 bit rate data rate 32 320 Kbps and variable bit rate e WMA v9 or earlier e Directory ne
19. Register your product and get support at HSB4383 12 www philips com welcome EN User manual FR Mode d emploi DA Brugervejledning IT Manuale utente DE Benutzerhandbuch NL Gebruiksaanwijzing ES Manual del usuario SV Anv ndarhandbok PHILIPS Contents 1 Important 5 Safety 5 Important Safety Instructions 5 Safety Important notes for users in the UK 6 Notice 7 Recycling 7 2 Your DVD Home Theater System 9 Introduction J What s in the box 9 Overview of the main unit 10 Overview of the remote control 11 3 Connect 13 Place the unit 13 Attach speakers to the main unit 13 Connect TV 13 Connect video cables 13 Option 1 Connect through HDMI 14 Option2 Connect through SCART 14 Option 3 Connect through component video 14 Option 4 Connect through composite video 15 Connect audio cables 15 Connect FM antenna 15 Connect power 16 4 Get started 17 Prepare the remote control 17 Turn on 17 Set up wireless connection manually 17 Find the correct viewing channel 18 Select the correct TV system 18 Select menu display language 18 Turn on Progressive Scan 18 Turn off progressive scan manually 19 Use Philips EasyLink 19 5 Play 20 Play discs 20 Use the disc menu 20 Select an audio language 20 Select a subtitle language 20 Sync audio output with video play 20 Play from USB 21 Play DivX video 21 Play MP3 WMA picture files 21 Play control 22 Select repeat shuffle play options 22 Repeat A B DVD VCD CD MP3 WMA 22 Se
20. arch forward backward 22 Resume video play from last stopped point 22 Play options 22 Display play information 22 Zoom in out image 22 Change the audio channel 22 Picture view options 23 Start slideshow of pictures 23 Rotate picture 23 Start musical slideshow 23 Adjust settings 24 General setup 24 Switch to standby mode 24 Audio setup 25 Video setup 25 Preference setup 26 Tune to FM radio stations 28 Program radio stations automatically 28 Program radio stations manually 28 Tune to a preset radio station 28 Set RDS clock 28 Show RDS information 29 EN 3 English Adjust volume level Select a sound effect Select a preset sound effect Select surround sound effect Adjust treble bass level Mute sound Other features Connect other devices Listen to an audio player 10 Product information Specifications Amplifier Disc Tuner FM Speakers General information Supported disc formats USB playability information 11 Tro ubleshooting 12 Appendix Mount to a wall 4 EN What s in the supplied mounting kit What else you ll need Mount the main unit and speakers Adjust volume level and sound effect 30 30 30 30 30 30 30 31 31 31 32 32 32 32 34 36 36 36 36 1 Important Know these safety symbols CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALI
21. e to a preset radio station Il Press MIR to select a preset number that you want Tip e You can also use the numerical keypad to select a preset station directly Set RDS clock You can use time signal broadcast together with the RDS signal to set the clock of the apparatus automatically 1 Tune to a RDS radio station that transmits time signals Ly The apparatus reads the RDS time and sets the clock automatically Note e The accuracy of the transmitted time depends on the RDS station that transmits the time signal Show RDS information RDS Radio Data System is a service that allows FM stations to show additional Information If you tune to a RDS station a RDS icon and the station name are displayed When automatic programming is used RDS stations are programmed first Tune to a RDS station 2 Press INFO repeatedly to scroll through the following information if available L gt Station name L gt Program type such as NEWS news SPORT sport POP M pop music L gt Frequency EN 29 English 8 Adjust volume level and sound effect Adjust volume level 1 During play press lt 4 to increase decrease the volume level Select a sound effect Note e You cannot use different sound effects at the same time Select a preset sound effect 1 During play press SOUND repeatedly to select e _ CLASSIC Concert e ROCK Action
22. ecline System When you play audio that is Audio routed from the connected Control devices this unit switches to the corresponding audio source automatically To enable this feature select On Then proceed to Audio Input Mapping to scan and map all the connected devices Audio When you map the audio input Input correctly this unit switches to Mapping the audio from the played device automatically Note e You must turn on the HDMI CEC operations on the TV devices before you can enjoy the EasyLink controls See the TV devices manual for details Philips does not guarantee 100 interoperability with all HDMI CEC compliant devices Display Dim Turn on or off adjustment of display brightness level Screen Saver The screen saver protects the TV screen damage due to prolonged exposure to a static image e On Enable the screen saver e Off Disable the screen saver Sleep Timer Switches to standby automatically after the preset time e DS mins 30 mins 45 mins 60 mins select the count down time before the apparatus switches to standby e Off disable sleep mode DivX R VOD Code Display the DivX registration code Tip e Enter this DivX registration code when you rent or purchase video from www divx com vod The DivX videos rented or purchased through the DivX VOD Video On Demand service can be played only on the device to which it is registered
23. ed all other connections 1 Connect the power plug of the main unit to the wall outlet 2 Connect the power plug of the digital wireless subwoofer to the wall outlet 16 EN 4 Get started Caution e Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation Always follow the instructions in this chapter in sequence If you contact Philips you will be asked for the model and serial number of this apparatus The model number and serial number are on the bottom of the apparatus Write the numbers here Model No Serial No Prepare the remote control En Caution e Risk of explosion Keep batteries away from heat sunshine or fire Never discard batteries in fire e Risk of decreased battery life Never mix different brands or types of batteries e Risk of product damage When the remote control is not used for long periods remove the batteries Ge 0 1 Open the battery compartment 2 Insert two RO3 or AAA batteries with correct polarity as indicated 3 Close the battery compartment he A o 9 Turn on 1 Press L gt The unit switches to the last selected source Wait for automatic setup of wireless connectio
24. for a standard TV or Progressive Scan TV e Option 4 connect through composite video CVBS for a standard TV Option 1 Connect through HDMI HDMI OUT HDMI IN Connect HDMI High Definition Multimedia Interface DVI Digital Visual Interface or HDCP High bandwidth Digital Contents Protection compliant TVs through HDMI for the best picture quality This connection transmits both video and audio signals Through this connection you can watch DVDs that contain HD High Definition content Note Note e This unit is HDMI CEC compatible It enables the connected TV device to control each other over HDMI e If your TV has only a DVI connection connect through a HDMI DVI adaptor An extra audio connection is needed to complete this connection e Some TVs do not support HDMI audio transmission e This connection provides the best video quality 1 Connect an HDMI cable not supplied to e the HDMI socket on this unit e the HDMI input socket on the TV 14 EN Option2 Connect through SCART d Ta E H Le NN SP 1 Connect one end of the AV cable red white yellow to the AV input sockets on the scart adapter Connect the other end to the AV OUT VIDEO OUT AUDIO RIL sockets on the unit then connect the SCART adapter to the TV Option 3 Connect through component video Co
25. ilable on the disc the disc uses its own default language e For some discs the subtitle audio language can only be changed from the disc menu e To select the languages that are not listed in the menu select Others Then check the Language Code list at the back of this user manual and enter the respective 4 digit language code Parental Restricts access to discs that are unsuitable for children These types of discs must be recorded with ratings 1 Press OK 2 Select a rating level then press OK 3 Press the numeric keys to enter the password e Rated discs above the level you set in Parental require a password to be played e The ratings are country dependent To allow all discs to play select 8 e Some discs have ratings printed on them but are not recorded with ratings This function has no effect on such discs Tip You can set or change the password see Preference Setup gt Password PBC Turns on or off the content menu of VCDs SVCDs with PBC playback control feature e On display index menu when you load a disc for play e Off skip the menu and start play from the first title MP3 JPEG Nav Select to display the folders or display all the files e With Menu display the folders of MP3 WMA files e Without Menu display all the files Password Set or change the password for locked discs and play restricted DVDs
26. ly e Select a title chapter track and then press gt Il Tip To play a locked DVD enter the 4 digit parental control password Use the disc menu When you load a DVD S VCD disc a menu may be displayed on the TV screen 20 EN To return to the menu during play TI Press MENU BACK Note e To see the disc menu of aVCD disc you must turn on PlayBack Control PBC feature of the disc Select an audio language You can select an audio language on DVDs DiVx video or VCDs 1 During disc play press AUDIO L gt The language options appear If the selected audio channels is unavailable the default disc audio channel is used Note e For some DVDs the language can only be changed from the disc menu Press MENU BACK to access the menu Select a subtitle language You can select a subtitle language on DVDs or DivX Ultra discs s During play press SUBTITLE Tip e For some DVDs the language can only be changed from the disc menu Press MENU BACK to access the menu Sync audio output with video play If the video play is slower than the audio output sound does not match with the pictures you can delay the audio output to match the video 1 Press and hold AUDIO SYNC until AUDIO SYNC XXX is displayed Lp XXX denotes the delay time 2 Within five seconds press lt 1 to set the delay time for audio output Play from USB Note e E
27. n between the main unit and subwoofer L gt PAIRING pairing flashes L gt If the connection succeeds PAIR OK pair OK is displayed and the blue indicator on the subwoofer lights up L gt If the connection fails PAIR FAIL pair fail is displayed and the green indicator on the subwoofer lights up L gt If the wireless connection fails set up the connection manually Set up wireless connection manually 1 In Normal Standby mode see Adjust Settings General Setup Standby Hodel press and hold DM on the main unit for 3 seconds L gt PAIRING pairing flashes Press and hold PAIR on the subwoofer for 3 seconds L gt The blue and green indicators on the subwoofer flash alternately L gt If wireless connection succeeds PAIR OK pair OK is displayed and the blue indicators on the subwoofer lights up Turn on the main unit again EN 17 English Note e Ifthe wireless connection fails again check whether there is any conflict or strong interference for example interference from other electronic devices around your location After removal of the conflict or strong interference repeat the above procedures Find the correct viewing channel 1 Press to turn on the unit 2 Press DISC to switch to disc mode 3 Tum on the TV and switch to the correct video in channel in one of the following ways e Go to the lowest channel on your TV then press the Channel Down
28. n is activated but the TV does not support progressive scan USB device not supported e The USB device is incompatible with the unit Try another one Cannot display some files in USB device e The number of folders or files in the USB device has exceeded a certain limit This phenomenon is not a malfunction e The formats of these files are not supported 34 EN No picture on HDMI connection s Check if the HDMI cable is faulty Replace a new HDMI cable s If this happens when you change the HDMI video resolution select the correct resolution until the picture appears No disc detected e Insert a disc e Check if the label side of the disc faces outwards e Wait until the moisture condensation at the lens has cleared e Replace or clean the disc e Use a finalized CD or correct format disc Black and white or distorted picture e The disc does not match the TV color system standard PAL NTSC e Sometimes a slight picture distortion may appear This is not a malfunction e Clean the disc e A distorted picture may appear during progressive scan setup The aspect ratio of the TV screen cannot be changed even though you have set the TV display format e The aspect ratio if fixed on the loaded DVD disc e The aspect ratio may not be changed for some TV systems No sound or poor sound e Adjust the volume e Ensure that the wireless subwoofer is connected Remote control does no
29. nnect a progressive scan TV through component video for higher quality video 1 Connect component video cables red blue green not supplied to e the COMPONENT VIDEO OUT Pr Cr Pb Cb Y sockets on this unit e the component input sockets on the TV Option 4 Connect through composite video VIDEO IN 1 Connect the yellow plugs of the supplied AV cable to e the VIDEO OUT socket on this unit e the video input socket on the TV Connect audio cables 1 To play sound from the TV through this unit connect audio cables red white not supplied to e the AUX L R sockets on this unit e the audio output sockets on the TV Connect FM antenna Tip e This unit does not support MW radio reception A U s J 1 Connect the supplied FM antenna to the FM ANT socket on the unit EN 15 English Connect power En Caution e Risk of product damage Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit e Risk of electric shock When you unplug the AC power always pull the plug from the socket Never pull the cord e Before you connect the AC power ensure you have complet
30. nsure that the USB device contains playable music pictures or video 1 Connect the supplied USB extension cable to e the USB device e the gt socket 2 Press USB to select the USB source L gt A contents menu is displayed Select a folder then press OK 3 4 Select a file to play then press H e To return to the main menu press A until the Previous folder is selected then press OK e To stop play press EB e To pause or resume play press H e To skip to the previous next file press WR Play DivX video You can play DivX files copied onto a CD R RW recordable DVD or USB device 1 Insert a disc or connect a USB device 2 Select a source e For discs press DISC e For USB devices press USB 3 Select a title to play then press DIL e To stop play press B e To pause or resume play press H e To change a subtitle language press SUBTITLE You can only play DivX videos rented or purchased through the DivX registration code of this unit Subtitle files with the following filename extensions srt smi sub ssa ass are supported but do not appear on the file navigation menu The subtitle filename has to be the same as the file name of the video Play MP3 WMA picture files You can play MP3 WMA picture files copied onto a CD R RW recordable DVD or USB device 1 Insert a disc or connect a USB device 2 Select a source e For discs p
31. p from standby mode and start disc play if a video disc is found in the disc compartment At the same time your TV will also be turned on and be switched to the correct viewing channel One touch power off System Standby When you connect this unit to devices that support standby mode you can use the remote control of this unit to switch this unit and all connected HDMI devices to standby mode You can also use the remote control from any of the connected HDMI devices to perform one touch standby One touch audio play System Audio Control When you connect this unit to HDMI CEC compliant devices the unit can switch automatically to play audio from the connected device EN 19 English 5 Play Note e With some disc file types play may differ Play discs En Caution e Never look at the laser beam inside the unit e Risk of product damage Never play discs with accessories such as disc stabilizer rings or disc treatment sheets e Never put any objects other than discs into the disc compartment 1 Press DISC to select the DISC source 2 Press A on the main set to open the disc compartment 3 Place a disc into the disc compartment and press H L gt Ensure that the label faces outwards 4 Play starts automatically e o stop play press W e To pause or resume play press H e To skip to the previous next title chapter track press WK If play does not start automatical
32. play press W again EN 23 English 6 Adjust settings Press OPTIONS Select a setup page Select an option and then press gt AWN Select a setting and then press OK e To return to the previous menu press lt e To exit the menu press E OPTIONS General setup On General Setup Page you can set the following options Disc Lock Set play restriction for specific discs Before you start place the disc in the disc compartment maximum 40 discs can be locked e Lock Restrict access to the current disc You need to enter a password to unlock and play the disc e Unlock Play all discs Tip e To set or change the password go to Preference Setup gt Password OSD Language Select the preferred language for on screen display Switch to standby mode Standby Mode Set the standby mode e Normal power consumption lt 4W e Low Power power consumption lt 1W However it requires longer time to power up 24 EN EasyLink If this unit is connected to HDMI CEC compliant TV devices all connected devices can respond to the following commands simultaneously Option Description One When you press PII the TV and Touch this unit are turned on Disc play Play starts if there is a disc in the unit System When you press and hold Standby connected HDMI CEC devices simultaneously switch to standby To disable this feature select D
33. play with black bars on the top and bottom of the screen e 16 9 Wide Screen For wide screen TV display ratio 16 9 Progressive Turn on or off progressive scan mode Picture Settings Select a predefined set of picture color settings or customize your personal setting e Standard original color setting e Bright vibrant color setting EN 25 English e Soft warm color setting e Personal customize the color setting Adjust the level of brightness contrast sharpness tint and color saturation HDMI Video Select the HDMI video output resolution that is compatible with your TV display capability Option Description Auto Detect and select the best supported video resolution automatically 480p Select a video 576p resolution that is best 720p supported by your TV 1080i See your TV manual 1080p for details Closed Caption Turn off or on display captions e On show the sound effects in subtitles Applicable only to discs with Closed Caption information included and the TV that supports this feature e Off turn off closed caption Preference setup On Preference Page you can set the following options Audio Select the preferred audio language for disc play Subtitle Select the preferred subtitle language for disc play Disc Menu Select the preferred disc menu language 26 EN e Ifthe language you have set is not ava
34. ress DISC e For USB devices press USB e A contents menu is displayed Select a folder then press OK A LA Select a file to play then press H e To return to the main menu press A until the Previous folder is selected then press OK e To stop play press B e To pause or resume play press H e To skip to the previous next file press WEI EN 21 English Play control Select repeat shuffle play options 1 During play press REPEAT PROGRAM repeatedly to select a repeat option or the shuffle play mode e To resume normal play press REPEAT PROGRAM repeatedly until Repeat Off is displayed Repeat A B DVD VCD CD MP3 WMA 1 During music or video play press REPEAT A B at the start point 2 Press REPEAT A B at the end point Ly The selected section starts to play repeatedly e To cancel repeat play press REPEAT A B again Note e The section A and B can be set only within the same track title Search forward backward 1 During play press lt gt 44 gt gt repeatedly to select a search speed e To resume play at normal speed press gt Il Resume video play from last stopped point Note e This feature is only available for video play 1 n stop mode and when the disc has not been removed press OK 22 EN To cancel resume mode and stop play completely 1 n stop mode press W Play options Display play information 1 During play
35. s ENERGY STAR and the ENERGY STAR mark are registered U S marks A e This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmfu interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help This apparatus includes this label CLASS 1 LASER PRODUCT Note e The type plate is located on the bottom of the apparatus 2 Your DVD Home Theater System Congratulations on your purchase and welcome to Philips To fully benefit from the support that
36. see the crossed out wheel bin symbol attached to a product it means the product is covered by the European Directive 2002 96 EC R Never dispose of your product with other household waste Please inform yourself about the local rules on the separate collection of electrical and electronic products The correct disposal of your old product helps prevent potentially negative consequences on the environment and human health Your product contains batteries covered by the European Directive 2006 66 EC which cannot be disposed of with normal household waste When you see the crossed out wheel bin symbol with the chemical symbol Pb it means that the batteries comply with the requirement set by the directive for lead R Please inform yourself about the local rules on separate collection of batteries The correct disposal of batteries helps prevent potentially negative consequences on the environment and human health Environmental information All unnecessary packaging has been omitted We have tried to make the packaging easy to separate into three materials cardboard box polystyrene foam buffer and polyethylene bags protective foam sheet Your system consists of materials which can be recycled and reused if disassembled by a specialized company Please observe the local regulations regarding the disposal of packaging materials exhausted batteries and old equipment The making of unauthorized copies of copy
37. sting up to a maximum of 8 levels e Number of albums folders maximum 99 e Number of tracks titles maximum 999 s D3 tag v2 0 or later e File name in Unicode UTF8 maximum length 128 bytes Unsupported formats e Empty albums an empty album is an album that does not contain MP3 WMA files and is not be shown in the display e Unsupported file formats are skipped For example Word documents doc or MP3 files with extension dlf are ignored and not played e _ AAC WAV PCM audio files s DRM protected WMA files wav m4a m4p mp4 aac e WMA files in Lossless format EN 33 English 11 Troubleshooting Caution e Never remove the casing of this unit To keep the warranty valid never try to repair the system yourself If you encounter problems when using this unit check the following points before requesting service If the problem remains unsolved go to the Philips web site www Philips com support When you contact Philips ensure that your unit is nearby and the model number and serial number are available No power e Ensure that the AC cord of the unit is connected properly e Ensure that there is power at the AC outlet e As a power saving feature the system switches off automatically 15 minutes after track play reaches the end and no control is operated No picture e Check the video connection e Turn on the TV to the correct Video In channel e Progressive sca
38. t work e Before you press any function button first select the correct source with the remote control e Reduce the distance between the remote control and the unit e Insert the battery with its polarities signs aligned as indicated e Replace the batteries e Aim the remote control directly at the sensor on the front of the unit Disc does not play e Insert a readable disc and ensure that the label side faces outwards e Check the disc type color system and regional code Check for any scratches or smudges on the disc e Press EI OPTIONS to exit the system setup menu e Disable the password for parental control or change the rating level e Moisture has condensed inside the system Remove the disc and leave the system turned on for about an hour Disconnect and reconnect the AC power plug and then turn on the system again e As a power saving feature the system turns off automatically 15 minutes after disc play reaches the end and no control is operated Poor radio reception e Increase the distance between the unit and your TV or VCR e Fully extend the FM antenna e Connect an outdoor FM antenna instead Wireless connection fails e Set up wireless connection manually see Set up wireless connection manually on page 16 Unable to select Progressive Scan e Ensure the component video mode is set to YUV No sound on HDMI connection e You may not hear any sound if
39. table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Kei Unplug this apparatus during lightning storms or when unused for long periods of time 43 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Battery usage CAUTION To prevent battery leakage which may result in bodily injury property damage or damage to the unit EN 5 English e Install all batteries correctly and as marked on the unit e Do not mix batteries old and new or carbon and alkaline etc e Remove batteries when the unit is not used for a long time 45 Apparatus shall not be exposed to dripping or splashing Do not place any sources of danger on the apparatus e g liquid filled objects lighted candles 7 This product may contain lead and mercury Disposal of these materials may be regulated due to environmental considerations For disposal or recycling information please contact your local authorities or the Electronic Industries Alliance www eiae org Safety Important notes for users in the U K Mains plug This apparatus
40. ve scan mode is deactivated see the TV user manual Switch the TV to the correct viewing channel for this unit Press DISC Press EI OPTIONS Press 4 to select Video Setup in the menu then press gt zl AUA OW N Select Progressive gt On then press OK L gt A warning message is displayed 8 To proceed select Ok and press OK Ly The progressive setup is complete Note e Ifa blank distorted screen is displayed wait for 15 seconds for auto recovery or turn off progressive scan manually 9 Turn on the progressive scan mode on the TV Turn off progressive scan manually 1 Turn off the progressive scan mode on the TV Press EI OPTIONS Press 4 to select Video Setup in the menu then press P Select Progressive gt Off then press OK To exit the menu press E OPTIONS U A WN Use Philips EasyLink This unit supports Philips EasyLink which uses the HDMI CEC Consumer Electronics Control protocol EasyLink compliant devices that are connected through HDMI connectors can be controlled by a single remote control Note e Philips does not guarantee 100 interoperability with all HDMI CEC devices ch Turn on the HDMI CEC operations on the TV or other connected devices See TVs devices manual for details 2 You can now enjoy the following Philips EasyLink controls One touch play Auto Wakeup TV When you press H this unit will wake u
Download Pdf Manuals
Related Search