Philips 550W User's Manual
Contents
1. amp Select your peripherals of the screen Pixel Plus 2 is switched on Press longer to display the list of digital options settings Use the cursor up down to select one of the settings See also Picture menu Digital options p 11 2 N 44 LS Pixel Plus 2 demio on off Audio and Video equipment keys Press to switch the Pixel Plus 2 see p 21 demo on or off In the right part Time display The time is displayed on the screen PER CS Surround mode s Incredible surround With stereo transmission and Teletext On Off see p 15 when Incredible surround is selected it seems as though the loudspeakers are spread further apart from one another OK Press this key to activate your choice when the menus to display the channel list 90 OOOO 6 Virtual Dolby surround Optimal with Dolby surround signals Enables you to experience the effect of Dolby surround Pro Logic reproducing a rear sound effect See Sound menu 3D effect p 12 Note You can make the same selection in the Sound menu surround mode p 12 MENU Main menu on off see 5 lt 1 To adjust the volume 4 Interrupt the sound or restore it P Channel selection To browse through the TV channels and sources stored in the favourite list O E no function Active Control 0 9 Digit keys To select a TV channel For a two digit p2. 100 Only for T O P teletext broadcasts Press i A T O P overview of the teletext subjects available is displayed Select with the cursor up down left right the desired subject and press the OK key Not all TV channels broadcast T O P teletext Select subpages When a selected teletext page consists of different subpages a list of available subpages appears on the screen Press the cursor left or right to select the next or previous subpage Enlarge a Teletext page Press 9 repeatedly to display the upper teletext part the lower teletext part and then to return to the normal teletext page size When the teletext page is enlarged you can scroll the text line by line using the cursor up down Picture Teletext Press the key Press the GB key to show Teletext on the right of the screen Use the cursor keys to select a TV channel Press the GB key to switch off dual screen Hypertext With hypertext you can quickly jump to a pagenumber or search for a specific word shown on the current teletext page Press the OK key to highlight the first word or a number on the page Use the cursor up down left right to select any other word or number you want to search for Press the OK key to confirm The search starts A message appears at the bottom of the screen to indicate the searching or that the word or page is not found Use the cursor up to exit hypertext 15 Teletext menu Pre
3. 16 discarded TV to concentrate the c tA Devi 17 reusable materials and fo minimise onnect Accessory Devices the amount of materials to be Recorder vcr dvd rw 17 disposed of Recorder and other A V devices 17 Your TV contains a tolerated small DVD Player or other accessory digital source devices 18 amount of mercury Please ensure you di Multi channel Surround receiver 18 ispose of your old TV according to d local regulations HDMI High Definition Multimedia Interface connector 19 Connect extra subwoofer 19 Side connections 20 To select connected peripherals 20 Record with your recorder 20 Audio and video equipment keys 21 9 22 7 NXT is a trademark of New Transducers Limited 1 Preparation Wall mounting instructions Table stand According to the type of TV you ve purchased a wall mount bracket and or stand may be supplied How to mount the supplied stand and or wall mount bracket see the supplied separate leaflet Make sure that the wall mount is being fixed securely enough so that it meets safety standards The weight of the TV excl packaging is about 35 kg 42PF9986 20 kg 32PF9966 42 kg 42PF9966 58 kg 50PF9966 Note Other not supplied stands are optional accessories Consult your dealer Place or hang the TV wherever you want but make sure that air can circulate freely through the venti
4. Press the cursor right to enter the keyboard Press the cursor up down left right to select the first character and press OK Repeat for every character you want to enter Select Space to enter a space Delete to erase the highlighted character in the name entered Shift to display upper or lowercase characters on the keyboard Special to display special characters on the keyboard Press OK to confirm Press the cursor left repeatedly when you have finished the name giving Select another channel number and repeat steps to Reshuffle the channel list You can change the order of the stored TV channels Reshuffle Install Select Reshuffle in the Installation menu Follow the instructions on screen Select Favourite TV channels Favourite channels Select Favourite channels in the Install menu Install Select your channel number with the cursor up down Select Yes or No with the cursor right Repeat and for every TV channel or external you want to make a favourite or a non favourite TV channel or external Setup Setup TM General Setup Demo Install General General Setup Menu background Smart surf PIP format Factory settings OSD Programme title Teletext 2 5 Auto surround Subwoofer Intelligent lights Set Change code Colour PLL The Setup menu contains items that control the settings of the TV s functions features services and peripherals you may hav
5. Select Channel lock if you want to lock a certain TV channel or external Select Unlock to disable all locks you have set On timer Select On timer with the cursor down VCR1 Sunday BBC2 Monday On timer TVE Duy 15 45 Select On with the cursor right Press the cursor right again to enter the channel list Select the TV channel or external you want your TV to switch to on a selected time and day Q Press the cursor right again to select a day of the week or to select Daily Q Press the cursor right once again to enter the time with the digit keys or with the cursor up down and press the OK key to activate Press the MENU key to turn off the menu Note To check your timer settings press the key 13 Dual screen PIP Multipip screen PIP Multipip Notes ape Display options Dual screen Press the GB key to switch on Dual screen PIP or one of the PIP modes according to the format selection made in the PIP format list in the General menu See Setup General p 8 Press the GB key again The screen that has a yellow border will become the full main screen picture Continuing to hold the key down will cycle the TV through the various formats Dual screen PIP 3 or PIP 6 launching a new format after each second the key is held down After standby of the TV the preference as set in the Setup General menu is used lt i
6. The remote control will operate your receiver DVD R receiver SAT RC6 CD R and DVD R DVD or DVD R in combination with a VCR instead receiver DVD R SAT RC6 SAT CD R or Select TV with the Select key VCR AUX To program Note return to the modes programmed in the DVD R press the OK key digit 2 factory either remove the batteries for a few SAT RC6 press the OK key digit 4 minutes or press the OK key digit 1 DVD CD R press the OK key digit 6 mode or digit 3 SAFRC5 or digit 5 CD DVD receiver press the OK key digit 7 mode DVD R receiver press the OK key digit 8 VCR press the OK key digit 9 21 Gp Care of the screen Do not touch push or rub or strike the screen with anything hard as this may scratch mar or damage the screen permanently And please do not rub with dust clothes with chemical treatment Do not touch the surface with bare hands or greasy cloth some cosmetics are detrimental to the screen Unplug the TV before cleaning the screen When the surface becomes dusty please wipe gently with absorbent cotton or other soft materials like chamois soaks Do not use acetone toluene and alcohol because they cause chemical damage Do not use liquid cleaners or aerosol cleaners Wipe off saliva or water drops as soon as possible Their long time contact with the screen causes deformations and colour fading Poor Picture Have you selected th
7. cursor right The message Searching appears and the progress of autoprogramming is displayed You can change the order of the stored TV channels You can use Reshuffle to renumber them See 7 Give name Give name Install Space ABCDEFG HIJKLMN 456 OPGRSTU 789 VWXYZ 0 Delete 123 Shift Special It is possible to change the name stored in the memory or to assign a name to a TV channel or external for which a name has not yet been entered A name with up to 5 letters or numbers can be given to the channel numbers 0 to 99 Manual installation Manual install Install System Channel Search Fine tune Antenna level Store Searching for and storing TV channels is done channel by channel You must go through every step of the Manual Installation menu Select Manual install in the Install menu Press the cursor down Follow the instructions on screen Search or direct selection of a TV channel If you know the frequency enter the 3 or 2 digits of the frequency directly with the digit keys 0 to 9 e g 048 Repeat to search for another TV channel after you have stored the selected TV channel Select Give Name in the Install menu and press the cursor down Select the channel number Note keep the cursor up down pressed to scroll through the channel list quickly Press the cursor right A keyboard appears on the screen Note Only European characters are displayed
8. down again to select the control you information about the selected want to select or to adjust menu item Note Items temporary not available or not relevant are displayed in a light grey colour and cannot be selected Installation The installation menu contains the following items Language Automatic Manual Give name Reshuffle Favourite install install channels Select the menu language the menu language Language Install Q Press the MENU key on the remote control English Use the cursor down to select Install Francais Use the cursor right to select Language Chinese Follow the instructions on screen Use the cursor up down to select your preferred language and press the OK key to confirm your selection Proceed with the Install menu IN Store TV channels TV channels After language is set correctly you can now search for and store the TV channels in two different ways using Automatic Installation or Manual Installation tuning in channel by channel Select your choice with the cursor right Automatic installation Automatic install Install Install Start Select Automatic install in the Install menu Note All channels must be unlocked in order to autoprogram If requested enter your code to unlock all channels See TV Features menu Childlock p 13 Press the cursor down The autoprogramming option label Start appears Press the
9. new personal 4 digit code The previous code is erased and the new code is stored 0 Colour Select Colour and press the cursor right If Auto is selected the respective colour system will be automatically selected according to the transmission system If the reception is poor select another sound system with the cursor up down PLL In rare cases certain TV channels may reproduce distorted or unstable pictures Select PLL Phase Locked Loop to switch to the setting 2 with the cursor left right to restore the picture for the respective transmission Source Source Setup AV1 AV2 HDMI Side Centre input Setup Demo Auto demo Install O 8 Dealer demo Digital options Light sensor 3D Y C Comb filter This menu allows you to indicate the peripheral you connected to one of the external inputs Press the cursor right to enter the list of types of peripherals attached to the selected input Select the peripheral device with the cursor up down Once you have selected the source type e g DVD this source will automatically be selected when your remote control is in DVD mode see p 3 and when you press the amp key on the remote control Centre input When you have connected a surround receiver to the TV see p 19 the loudspeakers of the TV can act as centre speaker making a separate centre speaker unnecessary Select Centre input On The Demo menu allows to demonstrate the TV feat
10. selected Select Cancel to cancel the word Space to enter a space Delete to delete the last character selected Shift to switch between lowercase or capital characters Special to display special characters on the keyboard and press the OK key Q Press the cursor left repeatedly to return to the Teletext menu again Searching a word Type in the word on screen or select a word from the history list on the right and press OK Select Accept and press OK again The message Searching appears To cancel the searching or to search for a new word select Keyboard and press OK When a word is not found a message appears When the word is found it is highlighted in the teletext page To continue the search press the OK key Cycle subpages if available Makes the subpages cycle automatically Press the cursor right to activate and to de activate again Timed page To display a specific page from a selected TV channel at a certain time Press the cursor right and select Yes or No Enter the time and pagenumber with the cursor keys or the digit keys Notes feletext does not have to remain switched on but you should watch the TV channel you have selected the specific page from It is not possible to display a timed page when HDMI mode Press the cursor left to return to the TV menu again f lt 4 M Connect Accessory Devices There is a wide range of audio and video de
11. 8 Adjust the frequency of the external subwoofer to 100 120 Hz according to your personal preference if present on the subwoofer Adjust the volume level of the external subwoofer presumed this control is present on the subwoofer See also the instruction manual of the external subwoofer 19 Side connections Camera Game or Camcorder 0 e 0 0 select connected peripherals CETERI je Connect your camera game or camcorder as shown Connect to VIDEO 2 and AUDIO L 3 for mono equipment For stereo equipment also connect AUDIO R 3 S VHS quality with an S VHS camcorder is obtained by connecting the S VHS cables with the S VIDEO input D and AUDIO inputs 3 Do not connect cable 1 and at the same time This may cause picture distortion Headphone Insert the plug into the headphone socket as shown Press 4 on the remote control to switch off the internal loudspeakers of the TV The headphone impedance must be between 8 and 4000 Ohm The headphone socket has a 3 5 mm jack In the Sound menu select Headphone volume to adjust the headphone volume Press the amp key repeatedly or select Source in the Setup menu see p 10 to select AV1 AV2 HDMI AV3 Side or TV channels according to where you connected your devices Press the cursor up down Press OK Remark Most equipment decoder recorder carries out the switching itself This is however n
12. FL SEE EVERY THING EXPERIENCE EVERY THING j Hi 1 LI S ft E X M 4 M M 4 bh MM Contents 2 Keys on top or on the right side of the 2 Use of the remote control RC4302 3 To use the 5 Installation 5 448888 n aca cR ea 5 Select the menu language 5 Store 5 6 Automatic installation 6 Manual installation 6 Give name 6 Reshuffle the channel list 7 Select Favourite TV channels 7 TV Set p esee e ha ee c d 8 General 8 Source 10 DEMO 10 11 Picture menu 11 Active Control 12 Sound 12 Ambilight 12 Features menu 13 Dual screen PIP 14 15 Switch Teletext on and off 15 Select a Teletext page 15 22 Previously selected teletext page 15 Ve End of life directives Select the index teletext page 15 Philips is paying a lot of attention to Select subpages 15 producing environmentally friendly in Enl Tel 15 green focal areas Your new TV contains 9 arge a le etext page materials which can be recycled and Picture Teletext 15 reused At the end of its life specialised Hypertext 15 companies can dismantle the Teletext menu
13. TV shows a full screen of video with a pip window of video on top if it PIP3 or PIP6 is selected the TV will display the main screen together with 3 or 6 pip screens See also p 14 Factory settings This resets the picture and sound settings to their predefined factory values but maintains the channel installation settings OSD On Screen Display Select OSD Select Normal to activate the continuous display of the programme number and extended display of TV channel and programme information on screen Minimum to activate the display of reduced channel information Note When subtitles is switched on see Features p 13 display of the channel number is not possible Programme title Select Programme title Yes or No When selected Yes after the selection of a TV programme or after pressing the key on the remote control a TV channel which broadcasts teletext may transmit the name of the TV channel or the programme title Teletext 2 5 Some broadcasters offer the opportunity to see more colours other background colours and nicer pictures in the teletext pages Select Teletext 2 5 Press the cursor right to select Teletext 2 5 On to take advantage of this feature Press the cursor right again to select Teletext 2 5 Off if you like the more neutral teletext layout The selection made is valid for all channels which broadcast teletext 2 5 Note It may take a few seconds before teletext broadcast switche
14. d stationary Moving or low contrast graphics are less likely to cause uneven aging of the screen Stock market stickers presented at the bottom of the TV screen Shopping channel logos and pricing displays bright and shown constantly or repeatedly in the same location on the TV screen Examples of still pictures also include logos computer images time display teletext and images displayed in 4 3 mode static images or characters etc Notes reduce contrast and brightness when viewing once burn in occurs it will never disappear completely 23 f BA M 4 M ft E X M 4 M SA
15. e connected The General menu allows you to change settings that will typically be accessed only occasionally The Source menu allows you to select a source This menu allows you to change various settings that are presumably adjusted less frequently than most other settings Press the key on the remote control to get information about the selected menu item Menu background Select Yes or No to turn the menu background on or off Smart surf Select Smart surf With the cursor left right select 2 channels if you want the key to toggle between the current and the previously selected channel 9 channels if you want the key to summon a list of up to 9 channels which can be selected To add remove a channel or source to the 9 channels list Tune to the channel or source you wish to add or remove Press the P P key and press the cursor right to add or remove Note If there are already 9 channels sources in the list the one at the bottom of the list will be removed PIP format This menu allows you to select the preferred format which can then be displayed toggling the GB key on and off Select PIP format with the cursor down Press the cursor right Select Dual screen PIP 3 or PIP 6 with the cursor down When Dual screen mode is activated with the remote control key and when Dual screen is selected the TV splits the screen into two equally sized screens PIP is selected the
16. e correct TV system in the manual installation menu s your TV or house aerial located too close to loudspeakers non earthed audio equipment or neon lights etc Mountains or high buildings can cause double pictures or ghost images Sometimes you can improve the picture quality by changing the direction of the aerial s the picture or teletext unrecognisable Check if you have entered the correct frequency See Installation Manual installation p 6 Are brightness sharpness and contrast out of adjustment Select Factory settings in the Setup General menu p 8 No Picture Are the supplied cables connected properly The aerial cable to the TV the other aerial to your recorder the power cables Has the child lock been switched off s your PC switched on Do you see a black screen and the indicator in front of the TV lights up this means that the display mode is not supported Switch your HDMI source to a correct mode case of weak or bad signal consult your dealer Digital distortion The low quality of some digital picture material may be the cause of digital image distortion In this case select the Soft setting using the Picture menu Smart Picture without changing the picture settings manually No sound No solution found for your picture or sound problem No sound on any channel Check the volume isn t at minimum Is the sound interrupted with the mute key Switch
17. ear Press the cursor down again to select Position or Size 14 Press the OK key or the cursor right to activate Use the cursor keys to define the position of the PIP screen Use the cursor left right to define the size of the PIP screen Q Press the OK key The PIP menu reappears Press the cursor up to the top of the menu to highlight the main screen again Q Press the OK key to switch off the menu or wait until it is timed out On Screen information The highlighted On Screen information which appears when changing channels always refers to the active screen Teletext Most TV channels broadcast information via teletext This TV has a 1200 pages memory that will store most broadcasted pages and subpages to reduce waiting time After each programme change the memory is refreshed Switch Teletext on and off Press to switch the teletext on 102 03 04 05 06 07 102 09 10 11 12 LIONS RECORD ANOTHER WIN 430 Select a Teletext page Enter the desired page number with the digit keys the cursor keys up down left right or with the P key Select the options at the bottom of the screen with the colour keys Previously selected teletext page Only possible in case there is no list of favourite teletext pages available See p 16 Press the key Select the index teletext page Press the grey colour key gt gt to display the main index usually p
18. eatures Channel list Off Subtitle On Sleeptimer On during mute Child lock On timer Press the cursor right to select Features Select the menu items with the cursor up down and adjust the settings with the cursor left right Use the on screen Menu Info for more information about the menu items Channel list Press the OK key to switch over to the selected TV channel or external Select subtitles The subtitle page must be stored for each TV channel Switch on teletext and select the proper subtitle page from the index Switch off teletext Subtitle On will automatically display them on the selected TV channels if subtitles are in the transmission A symbol will indicate that the mode is on Select On during mute when you want to have the subtitles automatically displayed only when the sound has been muted with the mK key on the remote control Sleeptimer This sets a time period after which the TV automatically switches to standby Child lock Select Child lock Lock Child lock Custom lock Channel lock Unlock Press the cursor right to enter the Child lock menu You re summoned to enter your code Note You have to re enter your code each time you enter the child lock menu Important You have forgotten your code See p 9 Select one of the menu items of the child lock menu Lock if you want to lock all channels and externals Custom lock and press the cursor right
19. ever the case with a computer connected to the HDMI input Record with your recorder with your recorder Record a TV programme You can record a TV programme using your recorders tuner without affecting your TV Select the channel number on your recorder Set your recorder to record See the handbook for your recorder Switching channel numbers on your TV does not disturb recording 20 Record a programme from MONITOR OUT You can record a programme on your recorder from the TV tuner via MONITOR OUT Switch on the device Select the channel or wanted device on your TV and the correct input on your recorder Set your recorder to record You record the tuner channel of the TV or selected device Do not switch channels or turn off your TV when you are recording through MONITOR OUT Audio and video equipment keys This system remote control operates the following Philips equipment TV VCR DVD DVD R SAT RC5 RC6 AMP TUNER CD CD R Press the Select key to operate any of the equipment indicated in the display AUX CD DVD R DVD SAT SAT RC5 Another device can be selected by pressing Select repeatedly within 2 seconds The led will blink slowly to indicate the device Press one of the keys on the remote control to operate the peripheral equipment To return to TV mode press Select while the led is blinking When no action is taken within 60 seconds the remote goes back to TV mode When
20. f 4 3 programmes with minimal distortion When in Movie Expand 14 9 Movie Expand 16 9 Super zoom or Subtitle zoom picture format you can make subtitles visible with the cursor up down Note With signals via the HDMI connector or HD signals via AV1 or AV2 less picture formats are selectable Ambilight see also p 12 ON OFF Press to switch Ambilight or off Keep pressed to cycle through changing brightness settings MODE Press repeatedly to select one of the predefined ambient light settings Note When the TV is switched to standby and you switch Ambilight On Ambilight will be active Only then less modes are available e Tewetemems Press the MENU key on the remote control to summon the main menu At any moment you can exit the menu by pressing the MENU key again Picture Sound Ambilight Features D Setup FT gt Demo Fo Install cursor to select Use the cursor in the up down direction to select the TV adjustments Setup Demo or Install menu Use the cursor left right to select Picture Sound OK key to Ambilight or Features activate Note Sometimes not all the menu items are visible on the screen A return or switch indicated by a cluster of blue balls Use the cursor down or right main menu on off to reveal all items 2 Use the cursor left right direction to select the menu item Press the key to get Use the cursor up
21. isplay modes EDTV 640 720 x 480p 720 x 576p HDTV 1280 x 720p not with 42PF9966 1920 x1080i 11521 VGA 640x480 60Hz SVGA 800x600 60 Hz XGA 1024 x 768 60 Hz not with 42PF9966 uncompressed HD content encrypted or non encrypted signals Connect the digital HDMI output of your HD device e g PC DVD player Set Top Box 1 to the HDMI connector of your TV In case a HD DVI device and if audio is present is connected also connect the audio cable to the AUDIO outputs of your HD device and to the R right and L left HDMI AV3 inputs of the panel of the TV Notes Proper working is only guaranteed with HDMI compliant consumer products Digital devices from different manufacturers have the possibility of differing output standards which may cause difficulties for the television to properly display If the set is cold there may be a small flicker when the set is turned on This is normal there is nothing wrong with the set If possible use the 1024x768 60Hz video mode to obtain the best image quality for your monitor 32PF9966 and 42 9986 Connect extra subwoofer To enhance the sound reproduction of your TV you can connect an externally powered subwoofer between 20 and MONITOR OUT AUDIO RECEIVER AVS 250 Hz Connect the audio cable of the external subwoofer to the SUBWOOFER socket at the bottom of your TV Select Subwoofer in the Settings General menu p
22. lation slots Do not install the TV in a confined space such as a book case or a similar Insert the aerial plug firmly into the aerial socket 7 at the bottom of the TV For best picture quality use the suppressor aerial cable supplied To connect your computer see p 19 To connect other peripherals see p 16 In order to obtain the best result please use only the supplied aerial cable between the TV and recorder and between recorder and aerial connector Insert the mains cord supplied into the mains at the bottom of the TV and in the wall socket having a mains voltage of 198 264V To prevent damaging the power AC cord which could cause a fire or electric shock do not place the TV on the cord unit To prevent any unsafe situations no naked flame sources such as lighted candles should be placed on or in the vicinity Avoid heat direct sunlight and exposure to rain or water The equipment shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on it Remote control Insert the 2 batteries supplied R6 1 5V The batteries supplied do not contain the heavy metals mercury and cadmium Please check on how to dispose of exhausted batteries according to local regulations Switch the TV on Press the power switch 1 at the top or the right side of the TV An indicator on the front of the TV lights up and the screen comes
23. on If the TV is in standby mode press the P keys or the 1 key on the remote control Keys on top or on the right side of the TV Picture Sound Ambilight Features Setup Demo Install Exit Should your remote be lost or broken you can still change some of the basic settings with the keys on top or on the right side according to your type of TV set of your TV Press the lt 1 key to adjust the volume the P CH key to select the TV channels or sources Press the MENU key to summon the main menu without the remote control Use the lt 1 key and the P CH key to select menu items in the directions as shown the MENU key to confirm your selection Note When activated via the MENU key on top or the right side the TV only Exit lets you remove the menu Navigate to Exit and press the MENU key Use of the remote control RC4302 Note For most keys pressing a key once will activate the function Pressing a second time will de activate it When a key enables multiple options a small list will be shown Press repeatedly to select the next item in the list The list will be removed automatically after 6 seconds or press OK to remove immediately Remark in HDMI mode only some keys are valid AMP DVD R TV SAT AUX D Standby See Audio and Video equipment Press to switch the TV on or off keys p 21 G When switched off a red indicator 0 ms on the TV lights up
24. rogramme number enter the second digit before the dash disappears To switch immediately to a selected one digit TV channel keep the digit key pressed a bit longer 3 B no function Freeze To freeze the picture Dependent on the input signal the function may not be possible On Screen information Press to display when available information about the selected TV channel and programme Menu info When a menu is on screen press to display info on the selected menu item PP Smart surf With this key you can easily switch between 2 up to 9 different TV channels or sources See General Smart surf p 8 Press the OK key or wait for the time out to dismiss the Smart surf display CB Dual screen PIP Multipip see 8 and p 14 Active control see p 12 Picture format Press this key repeatedly or press the cursor up down to select another picture format Auto format Super zoom 4 3 Movie Expand 14 9 Movie Expand 16 9 Subtitle zoom or Wide screen 0 7 n LOH 4 3 O O ras Wide screen 9 C3 M OOOO 199090 Auto format makes the picture fill the screen as much as possible In case of subtitles in the bottom black bar Auto format makes the subtitles visible In case of a broadcaster logo in the corner of the top black bar the logo disappears from the screen Super zoom removes the black bars on the sides o
25. s not possible to display a HD source in a Dual screen PIP screen When Dual screen mode is selected two picture formats are supported Full screen or 4 3 letterbox picture format vertical squeeze Audio from the right screen or the PIP plays to the headphones PIP PIP 3 PIP 6 AUX AUX PIP1 PIP1 PIP4 O Q PIP2 PIP2 5 PIP6 00 0 6 0 6 0 mom Multipip screen Press the cursor right to highlight the right screen Press the cursor down to highlight the single PIP screen Press the cursor right to enter the Multipip screen and then use the cursor keys to navigate through the PIP screens and to highlight Changing TV channels or external sources in left right PIP or Press the P keys or the key or the digit keys in order to change the TV channels or external sources in the highlighted Screen Scan PIP3 or PIP 6 Navigate to the lowest PIP and press the cursor down to display a following series of PIP screens Define the position and the size of the single PIP screen Select a Dual screen mode with a single PIP screen Press the cursor down to highlight the PIP screen A PIP menu appears with which you can define the position and the size of the PIP screen Note When the PIP menu times out press the OK key to make it reapp
26. s over to Teletext 2 5 Auto Surround Sometimes the broadcaster transmits special signals for Surround Sound encoded programmes The TV automatically switches to the best surround sound mode when Auto Surround is switched On Subwoofer Select Yes if you installed an external subwoofer See Connect Peripheral Equipment Connect extra subwoofer p 20 Intelligent lights only with 42PF9986 Select Yes if you want the blue lights in the keys on top of the TV to illuminate for a few seconds when somebody is within 1 1 5 m of the Note The functioning of Intelligent lights is based on reflection of moving objects In this way it will perform differently dependent on the environment and type colour of clothing worn Set Change code The Child lock feature see TV Features p 13 allows you to lock channels to prevent others from watching certain programmes To watch locked channels a 4 digit code must be entered The Set Change code menu item allows you to create or change a Personal Identification Number PIN Select Set Change code If no code exists yet the menu item is set to Set code If a code has previously been entered the menu item is set to Change code Follow the instructions on screen Important You have forgotten your code Select Change code in the General menu and press OK Press the cursor right and enter the overriding code 8 8 8 8 Press the cursor again and enter a
27. ss the MENU key to activate the menu Press the cursor up down to select the menu items Press the cursor right to activate Reveal Reveals conceals hidden information on a page such as solutions to riddles and puzzles Press the cursor right to activate Favourite You may create a list of eight favourite teletext pages in total selected from various TV channels To add a favourite page to the list Select a favourite teletext page Select Favourite in the teletext menu and press the cursor right to enter the list Press the cursor right again to add the page oo Press the MENU key to watch the current page To watch a favourite page from the list When in Teletext use the P P key to browse through the favourite pages of the TV channel actually selected Note only the pages of the current channel can be selected Search Selecting a word On the keyboard on screen you can type in a random word you want to search for in the teletext pages Whether upper or lowercase is used has no influence WORD NAME FOOTBALL Ex Cancel Space A BOC 6 Hood Ke EM IND 5 6 O0PARSTU 7 89 VWXYZ 0 Shift Accept Delete IN 2283 Special Press the cursor right to enter the keyboard Press the cursor left right up down to select the characters words or functions Note Only European characters are displayed 16 Press the OK key to confirm each character
28. ssions Picture format This will adjust the size of the picture dependent on the broadcast format and your preferred setting 11 Active Control Sound Sound Smart sound Equalizer Volume Balance Loudness Headphone volume Surround mode Dual I II Mono Stereo Digital Analogue 3D effect AVL Delta volume Ambilight Ambilight TV Ambilight mode 12 Ambilight Brightness Modes Palette Saturation Active control is a pro active and automatic system The TV continuously measures and corrects all incoming signals in order to provide the best picture possible Thanks to the Ambient Light Sensor which measures the light conditions of the room the contrast dynamic contrast brightness and colour picture settings are adjusted automatically The light sensor is active when the Active control function is switched to Medium or Maximum Press the amp key repeatedly to select the Active Control values Off Minimum Medium recommended or Maximum Off Sharpness and Dynamic Contrast are controlled automatically Minimum Sharpness Dynamic Contrast and Noise Reduction are controlled automatically Medium Sharpness Dynamic Contrast Noise reduction and Colour are controlled automatically Maximum Sharpness Dynamic Contrast Noise reduction Colour and Contrast are controlled automatically Press the cursor right to select INFO The Active Control demo menu appears The picture set
29. t of the AV device to the RF input 4 e 26 o el of the recorder Connect another RF cable 4 from the output OUT of g gene your recorder to the TV s input 75 Ohm 1 jack obtain better picture quality also connect the Video or S Video Audio left and Audio right cables of both 1 devices to AV1 Y or S VIDEO AUDIO L and 3 and to 2 CVBS or S VIDEO AUDIO L and R 5 7 0 Notes In case of mono equipment only the left loudspeaker RECORDER reproduces sound Use a mono to stereo adaptor not supplied for sound reproduction via all internal loudspeakers When using the S VIDEO connector do not connect any device to the AV2 CVBS or AV1 Y input 17 DVD Player or other accessory digital source devices Devices with Component Video Output Connectors AV2 AVI YPbPr R PUR SVIDEO d Connect the three separate component video cables 1 R 6 e to the device having component video outputs YPbPr e 5 such as DVD players laser disc players videogame players P un Sus eum satellite receivers or other equipment and to the Y Pb and Pr jacks of AV1 or AV2 on the TV EH 0 Pb Connect the audio cable to device s AUDIO L and R 2 jacks and to the L an R audio jacks of AV1 or AV2 N Devices with RGB output Connect the device with RGB output with separa
30. tal device further away from your TV Multi channel Surround receiver Connect the audio cable to the multi channel Surround receiver and to AUDIO RECEIVER L and R next to the CENTRE R CENTRE connector of your TV 1 Note turn off the TV and your surround receiver before connecting them Set the Surround receiver s volume to minimum AUDIO If you want the loudspeakers of your TV to act as centre speaker also connect an audiocable to the multi channel Surround receiver and to the CENTRE connector of your TV Select centre Input On in the Source menu See p 10 The loudspeakers of the TV will now only produce centre sound the loudspeakers connected to the audio receiver will produce Surround Sound The volume has to be controlled via the multi channel Surround receiver Note No sound will be heard when a TV channel or external source is blocked via the Channel Lock menu see p 13 18 HDMI High Definition Multimedia Interface connector AUDIO HDMI is the leading new standard for Digital High Definition video and audio interconnection Eg with a Digital a Set top box with HDMl equipped devices like a PC DVD R receiver Note the HDMI connector is compatible with DVI devices and HDMI to DVI conversion cable is included Then also connect the audio cables RE The HDMI IN connector allows the following and monitor d
31. te Horizontal and Vertical sync to the Pr R Pb B Y G input jacks and to the H and V jacks of AV2 v Connect the audio cables to the L and R AUDIO jacks of AV2 ol Devices with an S Video connector D Connect an S Video cable to the AV1 or AV2 S VIDEO DVD Cable Box i input Note When using the S VIDEO connector do not connect any device to the AV2 CVBS or AV1 Y input Connect the audio cables to the device s AUDIO L and R jacks and to the L and R audio AV1 jacks on the TV Notes The labels for the component video sockets may differ depending on the DVD player or the device connected Although the abbreviations may vary the letters B and R stand for the blue and red component signals respectively and Y indicates the luminance signal Refer to the DVD player s or devices instructions for use for definitions and connection details This television is designed to accept high definition signal standards 480p 720p not with 42PF9966 1080i and 11521 as specified by the Electronic Industries Association standard EIA7 70 3 Digital devices from different manufacturers have the possibility of differing output standards which may cause difficulties for the television to properly display Warning in case you notice scrolling images wrong colours or no colour no picture or even combinations of these on your screen check if the connections are done in the correct way or move your digi
32. th the cursor up down Note To remove the menu background before adjusting the picture settings see Select TV setup General p 8 Smart picture Select Smart picture to display a list of predefined picture settings each corresponding with specific factory settings Personal refers to the personal preference settings of picture in the picture menu Note this Philips Flat TV has been set at the factory to look best in bright store environments which use fluorescent lighting As your home will likely not be as well lit as a store we recommend that you cycle through the various Smart Picture modes to find the one that best suits your own viewing conditions Most consumers will find that Natural is the correct choice In case of weak RF AV signals please select Soft Digital options Pixel Plus 2 is the most ideal setting doubles the horizontal resolution and increases the number of lines by 3376 You may consider to select Movie Plus in case a halo effect should disturb you Dependent on your own preference select Progressive scan Dynamic contrast Sets the level at which the TV automatically enhances the details in dark middle and light areas of the picture DNR This sets the level at which noise is measured and reduced in the picture Colour enhancement This makes the colours more vivid and improves the resolution of details in bright colours Hue This compensates for the colour variations in NTSC encoded transmi
33. tings are being adapted continuously and automatically The menu items cannot be selected The sliders will be moving showing how the TV is tweaking the current picture None of the sliders is user controllable Press the OK key to switch off the Demo Press the cursor right to select Sound Select the menu items in the Sound menu with the cursor up down and adjust the settings with the cursor left right Remember control settings are at normal mid range levels when the bar scale is centred Smart sound Select Smart sound to display a list of predefined sound settings each corresponding with specific factory settings of Treble and Bass Personal refers to the personal preference settings of sound in the sound menu Notes Dual HI is only available with dual sound transmission Mono Stereo is only selectable in case of analogue stereo transmission Digital Analogue is only selectable in case of Digital transmission The Ambilight menu contains options for controlling the ambient lighting at the rear of the TV Using ambient light gives a more relaxed viewing experience and improves perceived picture quality See also the separate supplied brochure on Optimal viewing experience Press the cursor right to select Ambilight Select the menu items with the cursor up down and adjust the settings with the cursors left right Use the on screen Menu Info for more information about the menu items Features menu F
34. ures separately or in a continuous loop Toggling through all the Ambilight modes will display each mode for 10 seconds each Before switching to the next mode the light will first fade to off and then fade up in the next mode If Auto demo has been selected the demo will automatically present the features sequentially in a loop Press one of the cursor keys to stop the Auto demo If one of the features has been selected this particular feature demo will run only once and the Demo menu will reappear Ambient light Ambilight demo however will run continuously until it is stopped by pressing one of the cursor keys or the OK key on the remote control Note The Dealer demo is not part of the automatic sequence and can only be activated separately Qmm SSCS Press the MENU key on the remote control to summon the main menu Note Dependent on the input signal one or more menu items may not be selectable Press the key on the remote control to get information about the selected menu item Picture menu Picture Sound Ambilight Features TV Smart picture Contrast Brightness Colour Sharpness Tint Digital options Dynamic contrast DNR Colour enhancement Hue Picture format Press the cursor right to select Picture Select the menu items in the Picture menu with the cursor up down Adjust the settings with the cursor left right or enter the list of submenu items with the cursor right Select a submenu item wi
35. vices that can be connected to your TV The following connection diagrams show you how to connect them to the TV can handle YPbPr Y C and CVBS AV2 YPbPr RGB CVBS and Y C HDMI Side CVBS and Y C MONITOR OUT AUDIO 2 AVI RECEIVER 1 AV3 886860666666 wm 9 6 9 6 0 750 L Pb B CVBS H S VIDEO L Pb VIDEO L SUBW L L Recorder VCR DVD RW Note Do not place your recorder too close to the screen as some recorders may be susceptible for signals from the display Keep a minimum distance of 0 5 m from the screen Connect the RF Antenna cable 1 to the RF IN socket of your recorder Connect another RF cable 2 from the output OUT of Ni your recorder to the TV s input 75 jack Better playback quality can be obtained if you also connect the Video Audio Left and Right only for stereo devices AV cables G to the CVBS AUDIO L and R y input jacks of AV2 t CABLE If your recorder has an S VHS video jack For improved picture quality connect an S video cable OUT with the S VIDEO input instead of connecting the 1 recorder to the CVBS jack of AV2 Lr S Video does not provide audio so audio cables must RECORDER still be connected to provide sound Recorder and other A V devices Connect the RF antenna cable 1 of the RF IN socket mur of your other AV device 2 Avi aao oale Connect the RF outpu
36. you do not want the remote to go back to TV mode and to stay in the mode selected proceed as follows Select the desired mode with the Select key Wait until no LED is lit Press the Select key again simultaneously with the OK key for at least 2 seconds The remote will not go back to TV mode from now on and will remain in the mode selected To go back to the default setting of the remote TV mode repeat what is explained above selecting the TV mode Note When the Select key is pressed and held for more than 2 seconds the RC5 RC6 system select command is transmitted 9 9 5 to switch to standby MENU to switch the menu on or off Il for pause VCR DVD CD P for chapter channel track RDS news TA AMP selection to shuffle play CD R 0 to 9 digit entry for record tape index VCR 44 for rewind VCR CD select a DVD title chapter search down DVD AMP select a frequency AMP Ei for stop VCR timer for play cursor up down gt gt for fast forward VCR CD to select the next or the search up DVD AMP previous disc CD for pause CD R cursor left right 5 RDS display to select the previous or following track CD to select your choice of subtitle 4 search up down language DVD display information Additionally the DVD R SAT and AUX indicator Select the corresponding DVD R SAT AUX can be programmed to operate the DVD R DVD indicator
37. your TV off and then on again once Never attempt to repair a defective TV yourself Check with your dealer or call a TV technician Remote control Check if the remote control is in the correct mode If your TV no longer responds to the remote control the batteries may be dead You can still use the MENU key and the keys on top or the right side according to your type of TV set of your TV Standby Your TV consumes energy in the standby mode Energy consumption contributes to air and water pollution Power consumption 2 W No stable or not synchronised VGA picture Check if you have selected the correct VGA mode in your PC Miscellaneous See Extras Specifications on this CD 22 Warning concerning stationary images the TV screen A characteristic of Plasma Display Panels is that displaying the same image for a long time can cause a permanent after image to remain on the screen This is called phosphor burn in Normal use of the TV should involve the showing of pictures that contain constantly moving and changing images that fill the screen Examples of stationary images this is not an all inclusive list you may encounter others in your viewing TV menus Black bars when black bars appear at the left and right side of the screen it is recommended to change to a picture format so that the picture fills the entire screen TV channel logo present a problem if they are bright an
Download Pdf Manuals
Related Search