Philips 42HFL3684S/F7 Getting Started Guide
Contents
1. harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and the receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio or television technician for help Declaration of Conformity Trade Name PHILIPS Responsible Party P amp F USA Inc Model 46HFL36845 42HFL3684S 39HFL 36845 Address PO Box 2248 Alpharetta GA 30023 U S A Telephone Number 1 866 497 4225 Modifications This apparatus may generate or use radio frequency energy Changes or modifications to this apparatus may cause harmful interference unless the modifications are expressly approved in the manual The user could lose the authority to operate this apparatus if an unauthorized change or modification is made Cables Connections to this device must be made with shielded cables with metallic RFI EMI connector hoods to maintain compliance with FCC Rules and Regulations Canadian notice Standard Television Receiving Apparatus C2. F USA is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV Wall Mount Bracket or mount the TV onto the Bracket on your own The Wall Mount Bracket must be installed by experts Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Note to the CATV system installer This reminder is provided to call the CATV system installer s attention to Article 820 40 of the NEC that provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical Example of Antenna Grounding as per NEC National Electric Code GROUND CLAMP ANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT NEC SECTION 810 20 GROUNDING CONDUCTORS NEC SECTION 810 21 GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE ELECTRIC SERVICE EQUIPMENT SYSTEM NEC ART 250 PART H P amp F USA is not liable for these types of accidents or injury noted below e Install the Wall Mount Bracket on a sturdy vertical w
3. kHz Quantization bit rate 16 bit Changing picture and sound settings You must set Home in Location Otherwise these settings will not be memorized after the unit goes to standby mode Changing picture settings 1 Press MENU navigate to Consumer TV setup Picture 2 Press A or Y to select one of the picture settings and press OK to enter the setting 3 Adjust the picture quality Auto Picture You can manually set the picture controls for the Personal setting and or you can select one of the following Auto Picture presets Press A or w to select the desired setting then press OK The customized settings you defined by using the Personal lp Picture menu Standard For normal T V viewing Sports Vivid picture settings for high action Movie Brilliant picture settings for a cinematic experience Game Optimized for PCs games consoles and playstations 4 Press MENU to exit Changing sound settings Press MENU navigate to Consumer TV setup Sound 2 Press A or to highlight a sound setting and press OK to select the setting 3 Adjust the following items Auto Sound You can manually set the sound controls for the Personal setting and or you can select one of the following Auto Sound presets Press A or V to select the desired setting then press OK The customized settings you defined by using the Personal Sound menu Standard For normal T V view
4. position e Do not install the unit in direct sunlight or in a place subject to dust or strong vibration e Depending on the environment the temperature of this unit may increase slightly This is not a malfunction e Avoid a place with drastic temperature changes e Do not place anything directly on top or bottom of the unit e Depending on your external devices noise or disturbance of the picture and or sound may be generated if the unit is placed too close to them In this case please ensure enough space between the external devices and the unit Do not insert the AC power cord into the power socket outlet before all the connections are made e Ensure that you always have easy access to the AC power cord or plug to disconnect the TV from the power e Before you move the TV disconnect attached cables to prevent damage to connectors e Be sure to unplug the AC power cord from the AC outlet before moving or carrying the unit Regulatory notices Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning pulling standing or climbing on it A falling unit can cause serious injury or even death This apparatus should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided Make sure to leave a space of 4 inches 10cm or more around this apparatus Press to turn the unit on and go into standby mode To completely turn off th
5. 2HFL36845 39HFL36845 x 4 for 46HFL36845 Stand to Stand neck security hex screw x 4 for 46HFL36845 e Security bolt and cap x 2 e Washer x 2 e Security nut x 2 e Security double sided tape x 4 Note he items are available on selected models only An optional security tool is required to tighten the security screws and nuts Please contact your Philips authorized agent or distributor to purchase the tool TV Setup Philips Hospitality TVs have a USB cloning capability so you only need to manually setup one TV the master T V Then the complete setup configuration can be copied from the master TV to a USB storage device which can then be used to load the same setup configuration into all other TVs Step 1 is to setup the master T V as follows Accessing the setup menu To access and adjust the setup functions YOU MUST USE A SPECIAL SETUP REMOTE CONTROL not provided with the TV IN THE RC5 SETUP MODE All the following instructions assume the use of a setup remote control in the RC5 Setup mode Note he optional setup remote control is not included in the box Contact your Philips authorized agent or dealer to purchase the setup remote control Setup remote control might differ from the illustration RECALL INFO GUIDE CO O ALARM CLOCK SMART rN A TELETEXT e y RCSGUEST RC5SETUP RC6GUEST
6. Quick Start Setup Guide 46HFL36845 42HFL36845 39HFL3684S PHILIPS Know these safety symbols The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of CAUTIO N uninsulated dangerous voltage within the apparatus s enclosure RISK OF ELECTRIC SHOCK ha Ps sufficient magnitude to constitute a risk of DO NOT OPEN electric shock to persons CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT The exclamation point within an equilateral triangle is intended to REMOVE COVER OR BACK NO USER SERVICEABLE PARTS alert the user to the presence of important operating and INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL maintenance servicing instructions in the literature accompanying the apparatus The caution marking is located on the rear or bottom of the cabinet WARNING To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus CAUTION To prevent electric shock match wide blade of plug to wide slot fully insert ATTENTION Pour viter les choc lectriques introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu au fond PHILIPS Visit our world Wide Web Site at www philips com hospitality CHILD SAFET Y PROPER TELEVISION PLACEMEN
7. RC6SETU C PHILIPS HOSPITALITY Channel installation This section describes how to install the TV channels automatically Connect the RF signal to the TV 2 Plug the power cord into the power outlet Cable 3 TurntheTV on 46HFL3684S 42HFL3684S Press POWER at the rear of the TV or use the 5 POWER on the remote control id A CH V 4 vo gt 39HFL3684S Press 0 POWER at the front of the TV or use the 5 POWER on the remote control 4 Press RC5 SETUP to put the remote control into setup mode then press the HOME MENU button to display the setup menu Hereafter HOME MENU will be simply referred to as MENU D Select Consumer TV setup Setup Autoprogram then select Cable unless the installation is using only Antenna signals in which case you would select Antenna Note e The TV will not tune any channel that has not been first installed This includes SPI direct tune commands DATA RJ 12 SPI port Digital audio output jack Component Composite VIDEO Video Input jacks for VIDEO Analog audio L R Input jacks HDMI Input jack s PC Input jack USB terminal Antenna Input jack 0 Q Headphone 3 5mm stereo jack for personal listening Configure the Switch on settings 7 Press MENU and select Switch on settings 2 Press A or Y to se
8. T MATTERS THE CONSUMER ELECTRONICS INDUSTRY WALL OR CEILING MOUNT YOUR CARES TELEVISION e Manufacturers retailers and the rest of the consumer ALWAYS contact your retailer about professional electronics industry are committed to making home installation if you have any doubts about your ability to entertainment safe and enjoyable safely mount your television As you enjoy your television please note that all ALWAYS use a mount that has been recommended by televisions new and old must be supported on proper the television manufacturer and has a safety certification stands or installed according to the manufacturer s by an independent laboratory such as UL CSA ETL recommendations Televisions that are inappropriately ALWAYS follow all instructions supplied by the situated on dressers bookcases shelves desks speakers television and mount manufacturers chests carts etc may fall over resulting in injury ALWAYS make sure that the wall or ceiling where you TUNE IN TO SAFETY are mounting the television is appropriate Some mounts ALWAYS follow the manufacturer s recommendations are not designed to be mounted to walls and ceilings for the safe installation of your television With steel studs or cinder block construction If you are e ALWAYS read and follow all instructions for proper use unsure contact a professional installer of your television Televisions can be heavy A minimum of two people is NEVER allow child
9. all Ifinstalled onto a ceiling or slanted wall the TV and Wall Mount Bracket may fall which could result in a severe injury Do not use screws that are longer or shorter than their specified length If screws too long are used this may cause mechanical or electrical damage inside the TV set If screws too short are used this may cause the TV set to fall Do not fasten the screws by excessive force This may damage the product or cause the product to fall leading to an Injury For safety reasons use 2 people to mount the TV onto a Wall Mounting Bracket Do not mount the TV onto the Wall Mounting Bracket while your TV is plugged in or turned on It may result in an electrical shock injury When installing the unit on the wall allow this much space Top 11 8 inches 30cm Left and right side 5 9 inches 15cm Bottom 3 9 inches 10cm 1 Notice Trademarks are the property of Koninklijke Philips N V or their respective owners P amp F USA reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly The material in this manual is believed adequate for the intended use of the system If the product or its individual modules or procedures are used for purposes other than those specified herein confirmation of their validity and suitability must be obtained P amp F USA warrants that the material itself does not infringe any United States patents No further warranty is expresse
10. anada BETS 7 NTMR 7 for 39HFL3684S 46HFL3684S This Class B digital apparatus complies with Canadian ICES 003 for 42HFL3684S CAN ICES 3 B NMB 3 B Copyright All other registered and unregistered trademarks are the property of their respective owners The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries FOIT HIGH DEFINITION MULTIMEDIA INTERFACE Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories DOLBY DIGITAL En EN t V UM i Portions of this software are copyright The FreeType Project www freetype org LED backlighting technology uses less energy when compared with a standard CCFL backlighting LCD television of the same screen size Actual energy savings will vary depending on the screen size The American Academy of Pediatrics discourages television viewing for children younger than two years of age Closed Caption on Digital TV The EUT setting that satisfies 79 102 e is as follows Font Mono font Character size Large 2 Important Positioning the TV e Large screen Vs are heavy 2 people are required to carry and handle a large screen T V e Make sure to hold the upper and bottom frames of the unit firmly as illustrated e Install the unit in a horizontal and stable
11. d or implied P amp F USA cannot be held responsible neither for any errors in the content of this document nor for any problems as a result of the content in this document Errors reported to P amp F USA will be adapted and published on the P amp F USA support website as soon as possible Pixel characteristics This LCD product has a high number of color pixels Although it has effective pixels of 99 999 or more black dots or bright points of light red green or blue may appear constantly on the screen This is a structural property of the display within common industry standards and is not a malfunction Warranty No components are user serviceable Do not open or remove covers to the inside of the product Repairs may only be done by Service Centers and official repair shops Failure to do so shall void any warranty stated or implied Any operation expressly prohibited in this manual any adjustments or assembly procedures not recommended or authorized in this manual shall void the warranty Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause
12. e unit you must unplug the AC power cord Disconnect the AC plug to shut the unit off when trouble is found or not in use The AC plug shall remain readily available Never use a gas duster on this TV The gas trapped inside of this unit may cause ignition and explosion CAUTION Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type WARNING Batteries battery pack or battery installed shall not be exposed to excessive heat such as sunshine fire or the like WARNING To prevent injury this apparatus must be securely attached to the furniture wall in accordance with the instructions Tipping shaking or rocking the unit may cause injury death Environmental care wae The packaging of this product is intended to be recycled Contact your local authorities for information about how to recycle the packaging For product recycling information please visit www recycle philips com End of life directives E Philips pays a lot of attention to produce environment friendly products in green focal areas Your new TV contains materials which can be recycled and reused At the end of its life specialized companies can dismantle the discarded TV to concentrate the reusable materials and to minimize the amount of materials to be disposed of Please ensure you dispose of your old TV according to local regulations Disposal of used batteries The batteries supplied do not c
13. iers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart Is used use caution when moving the cart apparatus combination to avoid injury from tip over OR ET a Wall Mount Bracket Kit Brand Model _ M6 x 1 614 41mm 46HFL3684S PHILIPS with spacer SQM6485 SANUS SAN25BB 42HFL3684S Screw dimension M4 x 0472 12mm 39HFL3684S The recommended Wall Mount Bracket Kit sold separately allows the mounting of the TV on the wall For detailed information on installing the wall mount refer to the Wall Mount Instruction Book P amp
14. ing Movie Realistic sound settings for a cinematic experience Musi Emphasize high and low frequency for instrument usic sound News Clear sound settings for human voice 4 Press MENU to exit Clone TV configuration data Once you have completed the setup of the master TV and tested that it receives all the required channels follow the TV to USB section below to extract a copy of the setup configuration to a USB storage device Then follow the USB to TV section below to copy the setup configuration to all additional T Vs using the same configuration 10 TV to USB 1 Connect your USB storage device to the USB port on the side of your T V 2 Press MENU and select TV to USB 3 Press OK to start the copy of the configuration data to USB USB to TV 1 Connect your USB storage device to the USB port on the side of your T V 2 Press MENU and select USB to TV 3 Press OK to start the copy of the configuration data to TV Note e After this setting is completed the T V will restart automatically Multi RC Multi RC enables control of multiple TVs in a room without any interference from each others remote control To enable Multi RC each remote control is set to one of the four colors Blue Green Yellow or Red Each TV in the room Is separately programmed to a remote control of one of those colors In this way each TV responds to only one RC that is set to the same color as the TV itself This
15. lect the desired mode then press OK Switch on Defines the pre set volume level when TV is powered volume jon Maximum Defines the maximum limit of volume level except for volume the external set top box Switch on Defines the power on channel number or external channel video input Determines the state of the IV when the AC power is provided or restored On Powers on TV after the AC power is restored Power on digital signage application Standby V enters standby mode hospitality Returns TV to the same state as before power was interrupted general use Last status Configure the Control settings 7 Press MENU and select Control settings 2 Press A or Y to select the desired mode then press OK TV RC Sets the TV operative or inoperative by guest remote locked control Sets the TV operative or inoperative by local keyboard On The control buttons on the TV are disabled except for the Power button TV keys locked Of The control buttons on the TV are enabled and function normally All All the control buttons on the TV are disabled including the Power button Enable or disable to display the On Screen Display When you select Off those settings below cannot be displayed on TV channel number label name OSD channel not valid informati display channel not valid information The rest of menus s
16. ontain the heavy metals mercury and cadmium Nevertheless in many areas batteries may not be disposed of with your household waste Please ensure you dispose of batteries according to local regulations How to use this guide The Quick Start Setup Guide helps you install the Philips commercial television as quickly as possible It contains the necessary information to install the TV and configure the settings Read and understand the instructions in the Quick Start Setup Guide before you use your T V For detailed information on additional features download the user manual by selecting your TV model at www philips com hospitality The Quick Start Setup Guide contains the following information Contents of the box Configuration of channel and advanced settings Cloning of data As part of striving to improve the T V performance throughout the product life some TV menus may differ from the illustration on this document The contents of the box The box contains the following items e TV TV stand Quick Start Setup Guide this document Warranty sheet Remote control e 2x AAA 1 5V batteries TV stand hardware Stand to TV screws x 3 for 42HFL36845 39HFL36845 x 4 for 46HFL36845 e Stand to Stand neck screw x 4 for 46HFL36845 Stand pin x 2 for 42HFL3684S 39HFL3684S Screw for Stand pin x 4 for 42HFL3684S 39HFL3684S TV security package Stand to TV security hex screws x 3 for 4
17. prevents interference from each other s remote control when you watch multiple T Vs in a room Press MENU on the setup remote control to display the setup menu Press A V 4 to select Control settings Press AW lt P to select MultiRC Press A V lt P to select Select a color code 2 3 4 The TV is configured to respond to the RC that is set to the same color D On the guest RC press HOME the menu button and the color button same color as above simultaneously for at least 5 seconds e The guest RC is set to the selected color Note The Guest RC defaults to Blue and a remote which has been set to any color can operate any TV which has not been configured to a different color yet Therefore if 2 TVs are being configured in the same space then each T V RC pair MUST be set a their own color one pair cannot be left as default otherwise both RCs will operate the TV which has not been configured 11 PHILIPS P amp F USA Inc PO Box 2248 Alpharetta GA 30023 P amp F Mexicana S A de C V Av La Palma No 6 Col San Fernando La Herradura Huixquilucan Edo de M xico C P 52787 Philips and Philips Shield are used under license of Koninklijke Philips N V Printed in China MI TUA TTA A3AQZUH A3AHZUH A3ATZUH 2ZEMNO0043A xxx
18. ren to climb on or play on the required for a wall or ceiling mount installation television or the furniture on which the television is MOVING AN OLDER TELEVISION TO A NEW placed PLACE IN YOUR HOME NEVER place the television on furniture that can easily Many new television buyers move their older CRT be used as steps such as a chest of drawers televisions into a secondary room after the purchase of a ALWAYS install the television where it cannot be flat panel television Special care should be made in the pushed pulled over or knocked down placement of older CRT televisions ALWAYS route cords and cables connected to the ALWAYS place your older CRT television on furniture television so that they cannot be tripped over pulled or that is sturdy and appropriate for its size and weight grabbed NEVER place your older CRT television on a dresser A where children may be tempted to use the drawers to climb CE org safety INC A m m ALWAYS make sure your older CRT television does not hang over the edge of your furniture Important Safety Instructions Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturers instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplif
19. uch as CC Guest menu Setup Menu Status Menu Splash Screen Sleep Timer Sleep warning Message Freeze Child lock Message and USB Media Playback menu etc are still displayed EcoPower Sets the TV to reduce the power consumption Choose the SPI port connected to the external set top box Off SPI Port is disabled SPI Port 3V3 SPI Port is enabled with the data and clock line being pulled high to 3 3V voltage idle 5V SPI Port is enabled with the data and clock line being pulled high to 5V voltage idle Choose the standby mode when the TV goes into the standby mode When SPI Port is switched to 3V3 or 5V Standby mode should be set to Fast to support all the relevant SPI Port commands Standb While the TV is turned off in this mode the Todd SPI functionality is limited Once turned on Green complete SPI functionality is restored Refer to the full User Manual for more complete information Bake While the TV is turned off in this mode complete SPI functionality is maintained USB Enable or disable to support the feature of the USB bik media playback The USB cloning feature is always pay enabled regardless of this setting Enables control of multiple T Vs in a room without any MultiRC interference from each others remote control Note Supported USB Playback formats lt JPEG gt Upper limit 24Mpixel lt Motion JPEG gt Size 320x240 QVGA Frame rate 30fps Audio type LPCM Sampling frequency 32 kHz 44 1 kHz or 48
Download Pdf Manuals
Related Search