Home

Pelco Spectra IV SE Horizon Series Dome Drive IV SE User's Manual

1. ME HIGH Alarm action takes highest priority and will override manual pan POWER UP tilt and zoom control LINE SYNC SPRESETSS MEDIUM LOW Alarm action will not occur if an alarm occurs during manual pan PATTERNS SNES f tilt and zoom control lt WIND0W BLANKING gt 4 Set the alarm action lt ALARMS gt 2 4 a Use the joystick to position the cursor beside ALARM ACTION lt CLEAR gt lt PASSWORD gt b Press Iris Open The cursor moves to the right lt CLOCK gt lt EVENT gt y 5 Move the joystick up or down to view the available selections The following are the BACK settings for alarm action EXIT NONE No action when alarm is triggered PRESET Dome goes to the preset that is the same as the alarm number RESUME Preset 1 will go to Alarm 1 SEQUENCE SECS 2 RESET DELAY SECS PATTERN 1 Dome runs pattern 1 when alarm is triggered ALARM SETTINGS PATTERN 2 Dome runs pattern 2 when alarm is triggered EN PATTERN 3 Dome runs pattern 3 when alarm is triggered PATTERN 4 Dome runs pattern 4 when alarm is triggered PATTERN 5 Dome runs pattern 5 when alarm is triggered PATTERN 6 Dome runs pattern 6 when alarm is triggered PATTERN 7 Dome runs pattern 7 when alarm is triggered ALARM NUMBER PATTERN 8 Dome runs pattern 8 when alarm is triggered ALARM PRIORITY AUTO SCAN Dome starts auto scan operation when alarm is triggered RANDOM SCAN Dome starts random
2. 9 07 An event is a preprogrammed camera park scan preset pattern window blanking alarm or auxiliary function that can be performed automatically at a specific date and time For example suppose a camera is set to run in a continuous pattern that scans parking lot during business hours Monday through Friday On Saturday and Sunday the camera needs to stop running the pattern and observe a gate First program a preset to set the camera to observe the gate Second schedule an event to activate the preset on the weekends Finally a second separate event must be scheduled to end the first event and allow the camera to return to the pattern on Monday NOTE Events do not have a selectable duration A second event must be scheduled to end a previous event Events can be programmed from the Preset Pattern Window Blanking Alarm or Aux menus or they can be programmed from the Event menu Events are managed individually or as a group from the Event menu EVENT TYPE Any of the available event types can be selected from this menu or you may select ALL EVENTS to manage the events as a group NOTE The event type cannot be changed if you are accessing it through the Edit Schedule option from the Preset Pattern Window Blanking Alarm or Aux menu EVENT LABEL Set the event label to NEW to create a new event Use the following steps to manage an existing event 1 Use the joystick to position the cursor beside
3. EE 35 Auto White Balance 35 Backlight Compensation BLC 36 MD HE agan PvE 37 Wide Dy name Barige uec bie e Sawer 37 Electronic Image Stabilizatigfi x teo TES RINT RR 38 Image Enhancement e pre 38 Motion dba 39 DUIS 39 Proportional 39 ran CP 40 Scan 41 Preset Freeze Frame 41 SIOPS CP 42 Anmuth ZONO L uY G A Vaated alanis a a tend 43 POWER UD _____ 44 POWGTUDBAACUHDID naa ya quae map RO Se masha 44 Eh 45 y acts a Ec 46 Enable Motion Detection UR 49 Edit Ar dS sesiones reepa _ a toe een OG and E 49 Activate Aux dani 51 PRU 51 Edit Schi amp du le 51 pallens
4. lt MOTION gt Use the following steps to program alarm settings lt POWER UP gt LINE SYNC s a lt PRESETS gt 1 Use the joystick to position the cursor beside ALARM SETTINGS Press Iris Open lt PATTERNS gt lt ZONES gt WINDOW BLANKING 2 Select the alarm number lt ALARMS gt lt AUX gt a Use the joystick to position the cursor beside ALARM NUMBER TITLE TEXT gt lt CLEAR gt gt lt PASSWORD gt b Press Iris Open The cursor moves to the right lt CLOCK gt SS c Move the joystick up or down to view selections Press Iris Open to enter selection BACK EXIT ALARMS RESUME SEQUENCE SECS RESET DELAY SECS ALARM SETTINGS BACK EXIT ALARM SETTINGS ALARM NUMBER ALARM PRIORITY ALARM ACTION ACTIVATE AUX ALARM CONTACT EDIT SCHEDULE BACK EXIT 9 07 57 3 Select the alarm priority LANGUAGE a Use the joystick to position the cursor beside ALARM PRIORITY SYSTEM INFORMATION lt DISPLAY SETUP gt b Press Iris Open The cursor moves to the right lt DOME SETTINGS RESET CAMERA c Move the joystick up or down to view the available selections Available settings CYCLE CAMERA POWER include HIGH MEDIUM and LOW default If multiple alarms with different priorities REBOOT SYSTEM are active at the same time the dome will only go to the alarms with the highest EXIT e priority d Press Iris Open to enter selection DOME SETTINGS
5. power to the dome is cycled DOME SETTINGS The following settings are available RESET CAMERA CYCLE CAMERA POWER NONE 0 action REBOOT SYSTEM AUTO default The dome resumes its prior activity or direction before the power outage EXIT AUTO SCAN Dome starts auto scan operation RANDOM SCAN Dome starts random scan operation FRAME SCAN Dome starts frame scan operation PRESET 1 Dome goes to preset 1 lt CAMERA gt lt MOTION gt PRESET 2 Dome goes to preset 2 TEES PRESET 3 Dome goes to preset 3 pelo PRESET 4 Dome goes to preset 4 ZONES Y WINDOW BLANKING gt PRESET 5 Dome goes to preset 5 bir iid PRESET 6 Dome goes to preset 6 pM PRESET 7 Dome goes to preset 7 PRESET 8 Dome goes to preset 8 lt EVENT gt PATTERN 1 Dome runs pattern 1 a PATTERN 2 Dome runs pattern 2 PATTERN 3 Dome runs pattern 3 PATTERN 4 Dome runs pattern 4 PATTERN 5 Dome runs pattern 5 PATTERN 6 Dome runs pattern 6 PATTERN 7 Dome runs pattern 7 BACK PATTERN 8 Dome runs pattern 8 EXIT 44 9 07 LINE SYNC Line sync refers to a programmable function that allows you to synchronize all cameras within a LANGUAGE matrix system lt SYSTEM INFORMATION gt DISPLAY SETUPS NOTE Spectra SE Horizon dome systems automatically sense V Sync input No line sync lt DOME SETTINGS gt setup is required for Pelco control systems that provide a V Sync signal RESET CAMERA
6. tide 73 Reset Power EP ebd S EET N 74 6 _________ Ku 74 Cycle Camera POWE QR I Sa dead 74 Hebabt SYSTEM ib 74 software Langliage File Upload g uuu u E RR RR 75 Suggested Preventative 76 77 9 07 5 Welcome Thank you for purchasing Pelco s premier look up integrated dome system Spectra SE Horizon Your new system features a high resolution camera optics package with programmable dome drive software and the ability to view scenes 18 degrees above the horizon With the ability to view scenes above the horizon the Spectra SE Horizon dome system can be installed in many locations such as Stadiums Looking into upper levels from a lower level Buildings located on hillsides Looking up and down an adjacent street Airports Tracking incoming and departing aircraft Campus environments Observing taller adjacent buildings Parking structures Looking up and down ramps This manual is designed primarily to be a reference tool for the operation and programming of your system I
7. lt DISPLAY SETUP be the zero degree point Azimuth zero is normally set to magnetic north Once set azimuth and lt DOME SETTINGS gt compass readings are based on the set Azimuth Zero point RESET CAMERA To program azimuth zero CYCLE CAMERA POWER REBOOT SYSTEM mee 1 Use the joystick to position the cursor beside SET AZIMUTH ZERO 2 Press Iris Open 3 Follow the directions displayed on the monitor DOME SETTINGS CAMERA lt MOTION gt m POWER UP 1 Use the joystick to position the cursor beside CLEAR AZIMUTH ZERO LINE SYNC gt lt PRESETS gt lt PATTERNS gt 2 Press Iris Open lt 20 5 gt lt WINDOW BLANKING gt ALARMS 3 Follow the d lt AUX gt lt TITLE TEXT gt lt CLEAR gt lt PASSWORD gt lt CLOCK gt lt EVENT gt To clear azimuth zero rections displayed on the monitor BACK EXIT MOTION AUTO FLIP PROPORTIONAL PAN PARK TIME MINUTES PARK ACTION SCAN SPEED DEG S PRESET FREEZE FRAME LIMIT STOPS lt SET MANUAL STOPS gt lt CLEAR MANUAL STOPS gt lt SET SCAN STOPS gt lt CLEAR SCAN STOPS gt lt SET AZIMUTH ZERO gt lt CLEAR AZIMUTH ZERO gt BACK EXIT REFERENCE INFORMATION MANUAL LIMITS SET SCAN LIMITS SET 9 07 43 POWER UP POWER UP ACTION LANGUAGE This setting defines a specific activity scan preset pattern to be performed in the event the SYSTEM INFORMATION CDISPLAYSETUPS
8. lt ALARMS gt lt AUX gt lt TITLE TEXT gt lt CLEAR gt lt PASSWORD gt lt CLOCK gt lt EVENT gt BACK EXIT CAMERA TYPE OF LIGHTING AUTO FOCUS ZOOM LIMIT ZOOM SPEED LOW LIGHT LIMIT IR CUT FILTER AUTO IR LEVEL lt ADVANCED SETTINGS gt BACK EXIT 30 TYPE OF LIGHTING Pelco has calibrated settings that optimize the white balance and the picture for indoor and outdoor lighting conditions OUTDOOR default INDOOR AUTO FOCUS Auto focus allows the lens There are two settings remain in focus during zoom in zoom out and motion functions There are two auto focus settings ON default If auto focu s mode is set to ON the camera will focus automatically when using pan tilt and zoom functions OFF Focus is operated manually To focus press the Focus Far or Focus Near button on the con roller 9 07 PELCO SPECTRA IV SE HORIZON LANGUAGE lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt lt DOME SETTINGS gt RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT DOME SETTINGS lt CAMERA gt lt MOTION gt lt POWER UP gt lt LINE SYNC gt lt PRESETS gt lt PATTERNS gt lt ZONES gt lt WINDOW BLANKING gt lt ALARMS gt lt AUX gt lt TITLE TEXT gt lt CLEAR gt lt PASSWORD gt lt CLOCK gt lt EVENT gt BACK EXIT CAMERA TYPE OF LIGHTING AUTO FOCUS ZOOM LIMIT ZOOM SPEED LOW LIGHT LIMIT IR CUT FILTER AUTO IR L
9. 4 After a pattern is programmed the remaining storage percentage is displayed the screen lt EVENT gt This is the amount of memory available to program the remaining patterns BACK To clear a pattern EXIT 1 Use the joystick to position the cursor beside CLEAR PATTERN 2 Press Iris Open 3 Follow the directions displayed on the monitor PATTERN NUMBER lt PROGRAM PATTERN gt To edit the pattern schedule Eu lt gt B CK The Edit Schedule menu is a duplicate of the Edit Event menu in the Event section with the EXIT following exceptions In the Edit Schedule menu the event type cannot be changed Also the REFERENCE INFORMATION Holiday feature cannot be accessed from the Edit Schedule menu PATTERN USAGE REMAINING For instructions on changing the features in the Edit Schedule menu refer to the Edit Event section on page 69 NOTE When programming one or more presets within a pattern use the normal controller commands to Call a Preset Not all controllers can start all patterns However any of the patterns can be automatically started with park power up event and alarm functions 52 C3434M A 9 07 ZONES A zone is a pan area defined by a left and right limit on the 360 degree pan plane Spectra IV SE TEE Horizon dome systems are capable of eight zones each with a 20 character label lt SYSTEM INFORMATION gt To program a zone lt DISPLAY SETUP gt 20 a
10. REBOOT SYSTEM EXIT DISPLAY SETUP PRESET LABEL ZONE LABEL ZOOM AZIMUTH ELEVATION DIRECTION ALARM MESSAGE DATE TIME lt LABEL POSITIONS gt RESTORE FACTORY DEFAULTS BACK EXIT LABEL POSITION ZONE LABEL PRESET LABEL EVENT SAVE AND EXIT CANCEL AND EXIT HELP XXXo XXXo NE XXX XX XX XX YYYY 00 00 9 07 Labels can be placed anywhere on the monitor This feature allows you to customize the appearance of your monitor screen The following labels are not set at fixed positions PRESET LABEL ZONE LABEL ALARM 1 ZOOM RATIO XXX XX AZIMUTH ELEVATION XXX XX DIRECTION NE EVENT LABEL To set a label position 1 Use the joystick to position the cursor beside a label 2 Press Iris Open 3 Use the joystick to move the label up down left and or right 4 Press Iris Open 5 Repeat steps 1 through 4 to position other labels 6 Position the cursor next to Save and Exit Press Iris Open to save settings and exit menu Azimuth is the pan angle from zero to 359 degrees Elevation is the tilt position from 18 to 90 degrees 29 Dome Settings CAMERA LANGUAGE lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt lt DOME SETTINGS gt RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT DOME SETTINGS lt CAMERA gt lt MOTION gt lt POWER UP gt lt LINE SYNC gt lt PRESETS gt lt PATTERNS gt lt ZONES gt lt WINDOW BLANKING gt
11. RESET CAMERA CYCLE CAMERA POWER 2 00 5 5 DOME SETTINGS lt CAMERA gt lt MOTION gt lt POWER UP gt lt LINE SYNC gt 3 lt PRESETS gt lt PATTERNS gt lt ZONES gt lt WINDOW BLANKING gt lt ALARMS gt lt AUX gt 4 lt TITLE TEXT gt lt CLEAR gt lt PASSWORD gt lt CLOCK gt 5 lt EVENT gt BACK EXIT TITLE TEXT ENABLE TITLE TEXT lt EDIT TITLE TEXT gt BACK EXIT 9 07 1 Use the joystick to position the cursor beside EDIT TITLE TEXT Press Iris Open The following appears on the monitor Use the joys character To Open When the tit Text menu EDIT TITLE TEXT 1234567890 OK ABCDEFGHIJ CANCEL KLMNOPQRST UVWXY SPACE abcdefghij BACKSPACE klmnopqrst uvwxyz amp ick to position the cursor beside a character Press Iris Open to select the clear a character position the cursor beside BACKSPACE and then press Iris e is completed move the cursor to OK Press Iris Open to return to the Title Enable the ti le text label by doing the following a Move the cursor beside ENABLE TITLE TEXT b Press Iris Open The cursor moves to the right c Move the joystick up or down to view the selections Select ON and then press Iris Open to enable the title text 61 CLEAR Use this setting to clear user defined settings or return the dome to factory default settings LANGUAGE The following
12. The slowest shutter speed setting is 2 1 2 second The fastest setting is 30 000 1 30 000 second Increasing the shutter speed lowers the light sensitivity and reduces the streaking of fast moving objects NOTE Set the shutter speed to 100 if you are using an NTSC camera in a 50 Hz environment This will eliminate any flicker that may occur in the picture AGC LIMIT AGC limit allows users to adjust how the system balances AGC automatic gain control and electronic shutter in low light conditions As scene lighting decreases the system will automatically adjust adding a mixture of AGC and slow shutter according to the AGC limit setting AGC limit can be set between 0 and 40 with 40 applying maximum AGC before slow shutter In contrast setting AGC limit to 0 will force the system software to apply maximum slow shutter as defined by the low light limit setting before any AGC is applied The default AGC settings vary depending on camera model NOTE The maximum slow shutter that the system will achieve is 1 2 second shutter refer to the Low Light Limit section on page 31 33 PELCO SPECTRA IV SE HORIZON LANGUAGE lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt lt DOME SETTINGS gt RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT DOME SETTINGS lt CAMERA gt lt MOTION gt lt POWER UP gt lt LINE SYNC gt lt PRESETS gt lt PATTERNS gt lt ZONES gt lt WINDOW BLANKING gt lt ALARMS gt lt AUX gt
13. lt DOME SETTINGS gt 1 Use the joystick to position the cursor beside ZONE NUMBER Press Iris Open and the cursor moves to the right RESET CAMERA mE CYCLE CAMERA POWER 2 Move the joystick up or down to view selections Press Iris Open to enter selection REBOOT SYSTEM EE u 3 Use the joystick to position the cursor beside EDIT ZONE 4 Press Iris Open The Zone programming window appears on the monitor 5 Follow the directions displayed on the monitor After the left and right limit stops are set the Zones menu reappears with the ZONE ENABLED option set to YES CAMERA To edit a zone label 1 1 Use the joystick to position the cursor beside EDIT ZONE LABEL lt LINE SYNC gt lt PRESETS gt 2 Press Iris Open The following appears on the monitor lt PATTERNS gt lt ZONES gt lt WINDOW BLANKING gt lt ALARMS gt LABEL FOR ZONE ZONE NUMBER 1234567890 ABCDEFGHIJ CANCEL KLMNOPQRST lt AUX gt lt TITLE TEXT gt lt CLEAR gt lt PASSWORD gt lt CLOCK gt lt EVENT gt UVWXYZ SPACE abcdefghij BACKSPACE klmnopqrst uvwxyz BACK EXIT 3 Use the joystick to position the cursor beside a character Press Iris Open to enter selection To clear a character position the cursor beside BACKSPACE and then press Iris Open 4 When the label is completed move the cursor to OK Press Iris Open to return to the Zones ZONE NUMBER ZONE NOT DEFINED menu EDIT ZONE LABE
14. AUX 2 MODE TOGGLE 1 lt ALARM SETTINGS gt ACTIVATE AUX DWELL TIME SECS ALARM CONTACT lt EDIT SCHEDULE gt lt EDIT SCHEDULE gt EVENT EDIT EVENT EVENT TYPE ALL EVENTS EVENT LABEL EVENT LABEL NEW EVENT ACTIVE ON EDIT EVENT LABEL gt EVENT TIME 12 00 AM EDIT EVENT EVENT OCCURS CLEAR EVENT SUNDAY OFF LIST EVENT MONDAY OFF TUESDAY OFF HOLIDAY WEDNESDAY OFF EDIT HOLIDAY THURSDAY us CLEAR HOLIDAY gt LIST HOLIDAYS SATURDAY OFF REFERENCE INFORMATION HOLIDAY SKIP HOLIDAYS NUMBER 9 07 25 Language The language for the on screen menus is selectable Available languages include English TENGUAGE Spanish French German Italian Portuguese Russian Polish Turkish and Czech The factory _SYSTEMINEOPMATIONS default language is English lt DISPLAY SETUP gt DOME SETTINGS To change the display language RESET CAMERA 1 Usethe joystick to position the cursor beside LANGUAGE CYCLE CAMERA POWER REBOOT SYSTEM Bn 2 Press Iris Open The cursor moves to the right beside the current selected language 3 Move the joystick up or down to view selections Press Iris Open to enter selection All on screen menus are changed to the selected language 26 9 07 System Information PELCO SPECTRA IV SE HORIZON LANGUAGE lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt lt DOME SETTINGS gt RESET CAMERA CYCLE CAM
15. EVENT LABEL Press Iris Open 2 Move the joystick up or down to scroll through the events Press Iris Open to enter selection 67 PELCO SPECTRA IV SE HORIZON LANGUAGE lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt lt DOME SETTINGS gt RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT DOME SETTINGS lt CAMERA gt lt MOTION gt lt POWER UP gt lt LINE SYNC gt lt PRESETS gt lt PATTERNS gt lt ZONES gt lt WINDOW BLANKING gt lt ALARMS gt lt AUX gt lt TITLE TEXT gt lt CLEAR gt lt PASSWORD gt lt CLOCK gt lt EVENT gt BACK EXIT EVENT EVENT TYPE EVENT LABEL lt EDIT EVENT LABEL gt lt EDIT EVENT gt lt CLEAR EVENT gt lt LIST EVENT gt HOLIDAY lt EDIT HOLIDAY gt lt CLEAR HOLIDAY gt lt LIST HOLIDAYS gt BACK EXIT REFERENCE INFORMATION 12 00 AM NONE 68 EDIT EVENT LABEL After an event has been programmed the label can be changed using the following steps 1 Use the joystick to position the cursor beside EDIT EVENT LABEL 2 Press Iris Open The following appears on the monitor EDIT EVENT LABEL EVENT 1 1234567890 OK ABCDEFGHIJ CANCEL KLMNOPORST UVWXY SPACE abcdefghij BACKSPACE kImnopqrst uvwxyz amp 3 Use the joystick to position the cursor beside a character Press Iris Open to enter selection To clear a character position the cursor beside BACKSPACE and then press Iris Open 4 When label is completed move the cu
16. HOLIDAYS EVENT TYPE NUMBER 1 PRESET BACK EXIT a Use the joystick to position the cursor beside EVENT ACTIVE Press Iris Open Scroll to select NO to leave the event inactive or YES to activate the event Press Iris Open to confirm your selection b Use the joystick to position the cursor beside EVENT TIME Press Iris Open Scroll through the hours until the desired time appears Use the joystick to move the cursor to the right Scroll through the minutes until the desired time appears Press Iris Open to select the time c Use the joystick to position the cursor beside SUNDAY Press options are OFF and ON Press Iris Open to confirm your selec ris Open The available ion d Follow the instructions in the previous step for the remaining days of the week e Use the joystick to position the cursor beside HOLIDAY Press are the holiday settings ris Open The following SKIP HOLIDAYS Event will not occur on a day of the week that it is set for if that date is in the list of holidays ON Event will activate on holidays that have been set in the Event menu in addition to its normally scheduled days of the week OFF The event only occurs on the days of the week that it is scheduled holidays have no effect on the event 69 PELCO SPECTRA IV SE HORIZON LANGUAGE lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt lt DOME SETTINGS gt RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT DOME SETTING
17. MOTION gt POWER URS 2 Press Iris Open lt LINE SYNC gt lt PRESETS gt PATTERNS 3 All programmed holidays will be listed ZONES WINDOW BLANKING gt ALARMS lt AUX gt lt TITLE TEXT gt lt CLEAR gt lt PASSWORD gt lt CLOCK gt lt EVENT gt BACK EXIT EVENT EVENT TYPE EVENT LABEL lt EDIT EVENT LABEL gt lt EDIT EVENT gt lt CLEAR EVENT gt lt LIST EVENT gt HOLIDAY lt EDIT HOLIDAY gt lt CLEAR HOLIDAY gt lt LIST HOLIDAYS gt BACK EXIT REFERENCE INFORMATION 72 9 07 SCHEDULED EVENTS Use this page to record scheduled events EVENT NUMBER EVENT TYPE LABEL TIME OCCURS Example 1 Preset Weekend 11 00 AM Sat Sun Description Camera focuses on gate on weekends when the office is closed 9 07 HOLIDAY Skips Holidays 13 Reset Cycle Power Reboot RESET CAMERA LANGUAGE lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt lt DOME SETTINGS gt Use this function to reset all camera settings to factory default parameters CYCLE CAMERA POWER RESET CAMERA CYCLE CAMERA POWER If the camera is not operating or if you lose camera control cycle camera power Cycling camera REBOOT SYSTEM m power resets the camera but does not change any saved camera settings REBOOT SYSTEM Reboot the system if it is not operating or if there is no control Rebooting the system will cycle dome and camera power without chan
18. OFF OFF ON ON OFF OFF ON ON 205 ON OFF ON ON OFF OFF ON ON 206 OFF ON ON ON OFF OFF ON ON 207 ON ON ON ON OFF OFF ON ON 208 OFF OFF OFF OFF ON OFF ON ON 209 ON OFF OFF OFF ON OFF ON ON 210 OFF ON OFF OFF ON OFF ON ON 9 07 Table B Switch Settings for SW1 D Type Control Continued SWITCH SETTING ADDRESS SW12 SW1 3 SW1 4 SW1 5 SW1 6 SW1 7 SW1 8 211 ON ON OFF OFF ON OFF ON ON 212 OFF OFF ON OFF ON OFF ON ON 213 ON OFF ON OFF ON OFF ON ON 214 OFF ON ON OFF ON OFF ON ON 215 ON ON ON OFF ON OFF ON ON 216 OFF OFF OFF ON ON OFF ON ON 217 ON OFF OFF ON ON OFF ON ON 218 OFF ON OFF ON ON OFF ON ON 219 ON ON OFF ON ON OFF ON ON 220 OFF OFF ON ON ON OFF ON ON 221 ON OFF ON ON ON OFF ON ON 222 OFF ON ON ON ON OFF ON ON 223 ON ON ON ON ON OFF ON ON 224 OFF OFF OFF OFF OFF ON ON ON 225 ON OFF OFF OFF OFF ON ON ON 226 OFF ON OFF OFF OFF ON ON ON 227 ON ON OFF OFF OFF ON ON ON 228 OFF OFF ON OFF OFF ON ON ON 229 ON OFF ON OFF OFF ON ON ON 230 OFF ON ON OFF OFF ON ON ON 231 ON ON ON OFF OFF ON ON ON 232 OFF OFF OFF ON OFF ON ON ON 233 ON OFF OFF ON OFF ON ON ON 234 OFF ON OFF ON OFF ON ON ON 235 ON ON OFF ON OFF ON ON ON 236 OFF OFF ON ON OFF ON ON ON 237 ON OFF ON ON OFF ON ON ON 238 OFF ON ON ON OFF ON ON ON 239 ON ON ON ON OFF ON ON ON 240 OFF OFF OFF OFF ON ON ON ON 241 ON OFF OFF OFF ON ON ON
19. OFF ON OFF 95 ON ON ON ON ON OFF ON OFF 96 OFF OFF OFF OFF OFF ON ON OFF 97 ON OFF OFF OFF OFF ON ON OFF 98 OFF ON OFF OFF OFF ON ON OFF 99 ON ON OFF OFF OFF ON ON OFF 100 OFF OFF ON OFF OFF ON ON OFF 101 ON OFF ON OFF OFF ON ON OFF 102 OFF ON ON OFF OFF ON ON OFF 103 ON ON ON OFF OFF ON ON OFF 104 OFF OFF OFF ON OFF ON ON OFF 105 ON OFF OFF ON OFF ON ON OFF 9 07 14 Table B Switch Settings for SW1 D Type Control Continued SWITCH SETTING ADDRESS SW1 2 SW1 3 SW1 4 SW1 5 SW1 6 SW1 7 SW1 8 106 OFF ON OFF ON OFF ON ON OFF 107 ON ON OFF ON OFF ON ON OFF 108 OFF OFF ON ON OFF ON ON OFF 109 ON OFF ON ON OFF ON ON OFF 110 OFF ON ON ON OFF ON ON OFF 111 ON ON ON ON OFF ON ON OFF 112 OFF OFF OFF OFF ON ON ON OFF 113 ON OFF OFF OFF ON ON ON OFF 114 OFF ON OFF OFF ON ON ON OFF 115 ON ON OFF OFF ON ON ON OFF 116 OFF OFF ON OFF ON ON ON OFF 117 ON OFF ON OFF ON ON ON OFF 118 OFF ON ON OFF ON ON ON OFF 119 ON ON ON OFF ON ON ON OFF 120 OFF OFF OFF ON ON ON ON OFF 121 ON OFF OFF ON ON ON ON OFF 122 OFF ON OFF ON ON ON ON OFF 123 ON ON OFF ON ON ON ON OFF 124 OFF OFF ON ON ON ON ON OFF 125 ON OFF ON ON ON ON ON OFF 126 OFF ON ON ON ON ON ON OFF 127 ON ON ON ON ON ON ON OFF 128 OFF OFF OFF OFF OFF OFF OFF ON 129 ON OFF OFF OFF OFF OFF OFF ON 130 OFF ON OFF OFF OFF OFF OFF ON 131 ON ON OFF OFF
20. ON 242 OFF ON OFF OFF ON ON ON ON 243 ON ON OFF OFF ON ON ON ON 244 OFF OFF ON OFF ON ON ON ON 245 ON OFF ON OFF ON ON ON ON 9 07 Table B Switch Settings for SW1 D Type Control Continued SWITCH SETTING ADDRESS SW1 2 SW1 3 SW1 4 SW1 5 SW1 6 SW1 7 SW1 8 247 ON ON ON OFF ON ON ON ON 248 OFF OFF OFF ON ON ON ON ON 249 ON OFF OFF ON ON ON ON ON 250 OFF ON OFF ON ON ON ON ON 251 ON ON OFF ON ON ON ON ON 252 OFF OFF ON ON ON ON ON ON 253 ON OFF ON ON ON ON ON ON 254 OFF ON ON ON ON ON ON ON 9 07 Getting Started Once installed apply power to the Spectra IV SE Horizon dome system The system will start a configuration sequence When configuration is done the following information is displayed Pelco Spectra SE Horizon Version X XX D Address 1 P Address 2 Comm 2400 N 8 1 CONFIGURE DONE This information will remain on the monitor until dome operation begins Refer to the following pages to learn how to operate and program your dome system NOTE When installing a Spectra IV SE Horizon dome drive in a Spectra III back box for the first time a message appears When the installation is complete the dome drive will continue with a normal configuration sequence 9 07 How to Operate Your Dome System Operation How to Control Pan and Tilt Move joystick or press the direc
21. SHIFT Press Iris Open Scroll through the options until the d selection appears Press Iris Open to select the time shift ion the cursor beside the start date MONTH Press Iris Open Scroll through the options appears Press Iris Open to select the month 65 66 8 If RELATIVE DATE was selected the following appears on the monitor TIME BASE INTERNAL CLOCK TIME FORMAT 12 HOUR SET TIME 00 00 AM DATE FORMAT MM DD YYYY SET DATE 00 00 0000 DAYLIGHT SAVINGS RELATIVE DATE TIME SHIFT 1 HOUR START DATE MONTH APRIL WEEK 1ST DAY SUNDAY START TIME 02 00 AM END DATE MONTH OCTOBER WEEK LAST DAY SUNDAY END TIME 02 00 AM BACK EXIT Follow the instructions in step 7 for FIXED DATE adding WEEK 3434 9 07 EVENT PELCO SPECTRA IV SE HORIZON LANGUAGE lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt lt DOME SETTINGS gt RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT DOME SETTINGS lt CAMERA gt lt MOTION gt lt POWER UP gt lt LINE SYNC gt lt PRESETS gt lt PATTERNS gt lt ZONES gt lt WINDOW BLANKING gt lt ALARMS gt lt AUX gt lt TITLE TEXT gt lt CLEAR gt lt PASSWORD gt lt CLOCK gt lt EVENT gt BACK EXIT EVENT EVENT TYPE EVENT LABEL DIT EVENT LABEL gt DIT EVENT gt lt CLEAR EVENT gt lt LIST EVENT gt HOLIDAY lt EDIT HOLIDAY gt lt CLEAR HOLIDAY gt lt LIST HOLIDAYS gt BACK EXIT REFERENCE INFORMATION 12 00 AM NONE
22. Users should apply each of the settings to the camera to see which one best addresses the vibration that is affecting the video quality Electronic image stabilization will not correct for all ranges of vibration If either of the settings fails to eliminate the vibration seen the video other measures should be taken to isolate the lt MOTION gt vibration or to seek a more rigid mounting location lt POWER UP gt lt LINE SYNC gt lt PRESETS gt NOTES lt PATTERNS gt EAE a lt ZONES gt When electronic image stabilization is applied digital slow shutter and wide dynamic range are disabled Zoom image resolution and viewing angle are also limited when this feature lt AUX gt is activated lt TITLE TEXT gt u HEP CLEAR Electronic image stabilization cannot be used while in a preset that has motion detection PASSWORD lt CLOCK gt activated lt EVENT gt BACK IMAGE ENHANCEMENT EXIT The image enhancement feature improves the definition of objects lines or text in high contrast areas making them appear sharper CAMERA TYPE OF LIGHTING 1 There are two image enhancement settings ZOOM LIMIT 200 SPEED DEFAULT Image enhancement is not activated LOW LIGHT LIMIT IR CUT FILTER AUTO IR LEVEL ENHANCED Image enhancement is activated ADVANCED SETTINGS BACK WARNING When using this feature be aware that picture noise although unnoticeable to the EXIT eye will increa
23. are the available settings lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt ALL ZONES Clears all zones To clear a single zone refer to the Zones SUDMBSENTINGSS section on page 53 RESET CAMERA ALL PRESETS Clears all presets To clear a single preset refer to the Presets CYCLE CAMERA POWER section on page 46 REBOOT SYSTEM EXIT ALL PATTERNS Clears all patterns To clear a single pattern refer to the Patterns section on page 52 ALL WINDOW BLANKING Clears all blanked windows To clear a single blanked window refer to the Window Blanking section on page 54 CLEAR ALL EVENTS Clears all events To clear a single event refer to the Event CAMERA section on page 67 ROWER UR RESTORE FACTORY DEFAULTS Restores all camera settings to factory default settings lt LINE SYNC gt lt PRESETS gt lt PATTERNS gt lt ZONES gt lt WINDOW BLANKING gt lt ALARMS gt lt AUX gt lt TITLE TEXT gt lt CLEAR gt lt PASSWORD gt lt CLOCK gt lt EVENT gt BACK EXIT CLEAR CLEAR ALL ZONES CLEAR ALL PRESETS CLEAR ALL PATTERNS CLEAR ALL WINDOW BLANKING CLEAR ALL EVENTS RESTORE FACTORY DEFAULTS BACK EXIT 62 9 07 PASSWORD The Spectra IV SE Horizon features password protection to prevent unauthorized changes to the dome settings An operator can open the System Information and Display Setup screens but cannot access any of the dome settings menus PELCO SPECTRA IV SE HORIZON LANGUAGE lt S
24. as PelcoNet and guarantees that blanked areas will not be revealed when going to a preset DOME SETTINGS lt CAMERA gt MOTIONS ON The image on the screen freezes when a preset is called When the dome lt lt LINE SYNC gt reaches the preset the image is unfrozen and the preset scene Is displayed lt PRESETS gt lt PATTERNS gt OFF The image is never frozen ANDON BLANKING gt AUTO default Freeze frame is turned on automatically if window blanking is ON If window lt ALARMS gt blanking is OFF freeze frame is off lt AUX gt lt TITLE TEXT gt lt CLEAR gt lt PASSWORD gt lt CLOCK gt lt EVENT gt There are three preset freeze frame settings BACK EXIT MOTION AUTO FLIP PROPORTIONAL PAN PARK TIME MINUTES PARK ACTION SCAN SPEED DEG S PRESET FREEZE FRAME LIMIT STOPS lt SET MANUAL STOPS gt lt CLEAR MANUAL STOPS gt lt SET SCAN STOPS gt lt CLEAR SCAN STOPS gt lt SET AZIMUTH ZERO gt lt CLEAR AZIMUTH ZERO gt BACK EXIT REFERENCE INFORMATION MANUAL LIMITS SET SCAN LIMITS SET 9 07 4 LIMIT STOPS LANGUAGE Limit stops are programmable stops that limit the pan range of the dome There must be two lt SYSTEM INFORMATION gt DISPLAY SETUP limits a left and a right to define an area lt DOME SETTINGS gt NI There are two types of limit stops RESET CAMERA 24 CYCLE CAMERA POWER MANUAL A manual joystick pa
25. gt 12 2 Move the joystick to position the cursor beside SET WINDOWS Press Iris Open to enter lt gt PRESETS lt PATTERNS gt 3 Position the cursor beside WINDOW NUMBER Press Iris Open The cursor moves to the lt ZONES gt right lt WINDOW BLANKING gt lt ALARMS gt lt AUX gt 4 Move the joystick up or down to view selections Press Iris Open to enter selection lt TITLE TEXT gt ie 5 Use the joystick to position the cursor beside EDIT WINDOW LOCATION Press Iris Open pas and then follow the instructions that appear on the screen When all four corners are set the SET WINDOWS menu reappears the blanked area is displayed and the ENABLE Sa WINDOW option is set to YES NOTES Use the inside corner of the window selection tool as a guide STYLE when selecting the upper left upper right bottom right and BLANK ALL ABOVE bottom left corners of the window na Set windows not visible when editing a new window INSIDE CORNER lt SET WINDOWS gt location BACK EXIT SET WINDOWS WINDOW NUMBER lt EDIT WINDOW LOCATION gt lt EDIT WINDOW 200 lt EDIT SCHEDULE gt ENABLE WINDOW REVERSE CLEAR WINDOW BACK EXIT 54 9 07 The blanked area can be programmed to turn on or off at a specified zoom point To set the PELCO SPECTRA IV SE HORIZON zoom point LANGUAGE lt SYSTEM INFORMATION gt a Use the joystick to position the cursor beside EDIT WINDOW ZOOM and then
26. lt TITLE TEXT gt lt CLEAR gt lt PASSWORD gt lt CLOCK gt lt EVENT gt BACK EXIT CAMERA TYPE OF LIGHTING AUTO FOCUS ZOOM LIMIT ZOOM SPEED LOW LIGHT LIMIT IR CUT FILTER AUTO IR LEVEL lt ADVANCED SETTINGS gt BACK EXIT ADVANCED SETTINGS SHUTTER SPEED AGC LIMIT AUTO IRIS AUTO IRIS LEVEL AUTO IRIS PEAK AUTO SHARPNESS SHARPNESS LEVEL AUTO WHITE BALANCE R GAIN B GAIN BACKLIGHT COMP VIDEO LEVEL WIDE DYNAMIC RANGE PROGRESSIVE SCAN E IMAGE STABILIZER BACK EXIT 34 AUTO IRIS Auto iris is the lens function that automatically opens and closes the iris in response to changing light conditions Program the auto iris to operate automatically or at a user defined level OFF Auto iris is disabled and control is always manual AUTO default iris is adjusted automatically to produce a constant video output as determined by the auto iris level setting NOTE If auto iris is in the auto mode it will remain that way until the iris is manually opened or closed The dome will return to auto mode when it is panned or tilted more than 15 degrees Auto Iris Level Auto iris level is the numeric value the auto iris uses to maintain the brightness level of the camera Increase the value to brighten the scene Decrease the level to darken the scene This setting can be adjusted if the video level in the auto iris mode is too bright or too dark NOTE If backlight compensation is ON decre
27. that were shipped with it A WARNING Proper eye protection should be worn when using compressed air cans 3434 9 07 Specifications DD4H35 Signal Format NTSC Scanning System 2 1 Interlace mage Sensor 1 4 inch CCD Effective Pixels 768 X 494 V Horizontal Resolution gt 540 TV lines Lens 1 1 4 focal length 3 4 119 mm 35X optical zoom 12X digital zoom Zoom Speed optical range 3 2 4 6 6 6 seconds Horizontal Angle of View 55 8 at 3 4 mm wide zoom 1 7 at 119 mm telephoto zoom Focus Automatic with manual override Maximum Sensitivity at 35 IRE 0 55 lux at 1 60 sec shutter speed color 0 063 lux at 1 4 sec shutter speed color 0 00018 lux at 1 2 sec shutter speed B W Sync System Internal AC line lock phase adjustable through remote control V Sync White Balance Automatic with manual override Shutter Speed Automatic electronic iris manual 1 2 1 30 000 Iris Control Automatic iris control with manual override Gain Control Automatic of Video Output 1 Vp p 75 ohms Video Signal to Noise gt 46 50 dB Wide Dynamic Range 128X 9 07 DD4H35 X Signal Format Scanning System mage Sensor Effective Pixels Horizontal Resolution Lens Zoom Speed Horizontal Angle of View Focus Maximum Sensitivity at 35 IRE Sync System White Balance Shutter Speed Iris Control Gain Control Video Output Video Signal to Noise Wide Dynamic Range PAL 2 1 Interlace 1 4 inch CCD 75
28. 0 TIME BASE INTERNAL CLOCK CLEAR ALL PRESETS EDIT PASSWORD ABCDEFGHIJ TIME FORMAT 12 HOUR CLEAR ALL PATTERNS KLMNOPQRST SET TIME 12 00 AM CLEAR ALL WINDOW BLANKING UVWXY DATE FORMAT MM DD YYYY CLEAR ALL abcdefghij SET DATE 00 00 0000 RESTORE FACTORY DEFAULTS kimnopqrst DAYLIGHT SAVINGS OFF uvwxyz amp 24 C3434M A 9 07 DOME SETTINGS lt CAMERA gt lt MOTION gt lt POWER UP gt lt LINE SYNC gt lt PRESETS gt lt PATTERNS gt lt ZONES gt lt WINDOW BLANKING gt lt TITLE TEXT gt lt CLEAR gt PASSWORD lt CLOCK gt lt EVENT gt LINE SYNC PRESETS EDIT DETECTION AREAS LINE SYNC ON PRESET NUMBER DETECTION AREA 1 PATTERN NUMBER LINE SYNC PHASE PRESET NOT DEFINED LOCATION 0 PATTERN gt lt EDIT PRESET LABEL gt SENSITIVITY MEDIUM lt CLEAR PATTERN gt lt EDIT PRESET SCENE gt DETECTION AREA 2 lt EDIT SCHEDULE gt lt EDIT CAMERA SETTINGS gt LOCATION 0 lt MOTION DETECTION gt SENSITIITY MEDIUM REFERENCE INFO EDIT SCHEDULE DETECTION AREA 3 PATTERN USAGE CLEAR PRESET gt LOCATION 0 REMAINING lt CLEAR CAMERA SETTINGS gt SENSITIVITY MEDIUM REFERENCE INFORMATION DETECTION AREA 4 AZIMUTH LOCATION 0 ELEVATION SENSITIVITY MEDIUM 200 CUSTOM CAMERA SETTINGS PATTERNS ALARM SETTINGS TITLE TEXT RESUME ALARM NUMBER AUX 1 MODE TOGGLE ENABLE TITLE TEXT SEQUENCE SECS ALARM PRIORITY DWELL TIME SECS 1 EDIT TITLE TEXT gt RESET DELAY SECS ALARM ACTION
29. 0 to the ON position NOTE Dome termination is not required for Coaxitron control DOME DRIVE INSTALLATION Install the dome drive Line up the blue and red tabs with the blue and red arrows on the hinged door inside the back box Push the tabs in Insert one side and then the other side Continue pushing on the ends of the tabs until both sides click into place Refer to Figure 2 To use your dome system refer to the Getting Started section on page 19 Figure 2 Dome Drive Installation NOTE When removing a dome drive that has been in use caution should be taken to avoid direct contact with the top plate of the unit This section of the unit will be warm to the touch when first removed from an operating unit 9 07 10 Table A Switch Settings for SW1 P Type Control SPECTRA SWITCH SETTING ADDRESS SWI 2 swi 4 SW1 5 SWI 6 SWI 7 1 OFF OFF OFF OFF OFF OFF OFF OFF 2 ON OFF OFF OFF OFF OFF OFF OFF 3 OFF ON OFF OFF OFF OFF OFF OFF 4 ON ON OFF OFF OFF OFF OFF OFF 5 OFF OFF ON OFF OFF OFF OFF OFF 6 ON OFF ON OFF OFF OFF OFF OFF 7 OFF ON ON OFF OFF OFF OFF OFF 8 ON ON ON OFF OFF OFF OFF OFF 9 OFF OFF OFF ON OFF OFF OFF OFF 10 ON OFF OFF ON OFF OFF OFF OFF OFF ON OFF ON OFF OFF OFF OFF 12 ON ON OFF ON OFF OFF OFF OFF 13 OFF OFF ON ON OFF OFF OFF OFF 14 ON OFF ON ON OFF OFF OFF OFF 15 OFF ON ON ON OFF OFF OFF OFF 1
30. 2 H X 582 V gt 540 TV lines 1 4 focal length 3 2 4 6 6 6 secon 3 4 119 mm 35X optical zoom 12X digital zoom ds 55 8 at 3 4 mm wide zoom 1 7 at 119 mm telephoto zoom Automatic with m anual override 0 50 lux at 1 50 sec shutter speed color 0 062 lux at 1 3 sec shutter speed color 0 00014 lux at 1 1 5 sec shutter speed B W Internal AC line lock phase adjustable through remote control V Sync Automatic with m anual override Automatic electronic iris manual 1 1 5 1 30 000 Automatic iris control with manual override Automatic off 1 Vp p 75 ohms gt 46 50 dB 128X Green The materials used in the manufacture of this document and its components are compliant to the requirements of Directive 2002 95 EC This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002 96 EC of the European Union regarding the disposal of waste electrical and electronic equipment WEEE Contact your local dealer for procedures for recycling this equipment 3434 9 07 PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace without charge any merchandise proved defective in material or workmanship for a period of one year after the date of shipment Exceptions to this warranty are as noted below Five years on fiber optic products and TW3000 Series unshielded twisted pair transmission products hre
31. 20 20 to 92 below horizon 30 18 above horizon to 30 below horizon 30 30 to 92 below horizon 40 18 above horizon to 40 below horizon 40 40 to 92 below horizon 50 18 above horizon to 50 below horizon 50 50 to 92 below horizon 60 18 above horizon to 60 below horizon 60 60 to 92 below horizon 70 18 above horizon to 70 below horizon 70 70 to 92 below horizon 80 18 above horizon to 80 below horizon 80 80 to 92 below horizon CAMERA a HORIZON Figure 3 Window Blank Tilt Angles 3434 9 07 ALARMS The Spectra IV SE Horizon dome system has seven alarm inputs that can be programmed as high PELCO SPECTRA IV SE HORIZON U medium or low priority When an alarm is received an input signal to the dome triggers the user defined action go to preset run pattern etc programmed for the alarm lt SYSTEM INFORMATION gt DISPLAY SETUP SPOME There are three global alarm settings RESUME This mode lets the dome resume its previous activity scan pattern or Oe ANEA POWER previous position after all alarms are cleared REBOOT SYSTEM SEQUENCE This is the time the dome will perform an alarm activity when more than one EXIT D alarm of the same priority occurs at the same time RESET DELAY This is the amount of time the dome considers the alarm to be active after it has physically cleared lt CAMERA gt
32. 6 ON ON ON ON OFF OFF OFF OFF 1 OFF OFF OFF OFF ON OFF OFF OFF 18 ON OFF OFF OFF ON OFF OFF OFF 19 OFF ON OFF OFF ON OFF OFF OFF 20 ON ON OFF OFF ON OFF OFF OFF 21 OFF OFF ON OFF ON OFF OFF OFF 2 ON OFF ON OFF ON OFF OFF OFF 23 OFF ON ON OFF ON OFF OFF OFF 24 ON ON ON OFF ON OFF OFF OFF 25 OFF OFF OFF ON ON OFF OFF OFF 26 ON OFF OFF ON ON OFF OFF OFF 2 OFF ON OFF ON ON OFF OFF OFF 28 ON ON OFF ON ON OFF OFF OFF 29 OFF OFF ON ON ON OFF OFF OFF 30 ON OFF ON ON ON OFF OFF OFF 31 OFF ON ON ON ON OFF OFF OFF 32 ON ON ON ON ON OFF OFF OFF 9 07 Table B Switch Settings for SW1 D Type Control amm SWITCH SETTING EE SW1 2 E sw1 4 sw1 5 sw1 6 SW1 7 SW1 8 1 ON OFF OFF OFF OFF OFF OFF OFF 2 OFF ON OFF OFF OFF OFF OFF OFF 3 ON ON OFF OFF OFF OFF OFF OFF 4 OFF OFF ON OFF OFF OFF OFF OFF 5 ON OFF ON OFF OFF OFF OFF OFF 6 OFF ON ON OFF OFF OFF OFF OFF 7 ON ON ON OFF OFF OFF OFF OFF 8 OFF OFF OFF ON OFF OFF OFF OFF 9 ON OFF OFF ON OFF OFF OFF OFF 10 OFF ON OFF ON OFF OFF OFF OFF 11 ON ON OFF ON OFF OFF OFF OFF 12 OFF OFF ON ON OFF OFF OFF OFF 13 ON OFF ON ON OFF OFF OFF OFF 14 OFF ON ON ON OFF OFF OFF OFF 15 ON ON ON ON OFF OFF OFF OFF 16 OFF OFF OFF OFF ON OFF OFF OFF 17 ON OFF OFF OFF ON OFF OFF OFF 18 OFF OFF OFF ON OFF OFF OFF 19 ON ON OFF OFF ON OFF OFF OFF 20 OFF OFF ON OFF ON OFF OF
33. Dome starts random scan operation ESC FRAME SCAN Dome starts frame scan operation pe PRESET 1 Dome goes to preset 1 ni NONE PRESET 8 Dome goes to preset 8 2 PATTERN 1 Dome runs pattern 1 PATTERN 2 Dome runs pattern 2 PATTERN 3 Dome runs pattern 3 lt EVENT gt PATTERN 4 Dome runs pattern 4 BACK PATTERN 5 Dome runs pattern 5 PATTERN 6 Dome runs pattern 6 PATTERN 7 Dome runs pattern 7 PATTERN 8 Dome runs pattern 8 MOTION AUTO FLIP PROPORTIONAL PAN PARK TIME MINUTES PARK ACTION SCAN SPEED DEG S PRESET FREEZE FRAME LIMIT STOPS lt SET MANUAL STOPS gt lt CLEAR MANUAL STOPS gt lt SET SCAN STOPS gt lt CLEAR SCAN STOPS gt lt SET AZIMUTH ZERO gt lt CLEAR AZIMUTH ZERO gt BACK EXIT REFERENCE INFORMATION MANUAL LIMITS SET SCAN LIMITS SET 40 9 07 PELCO SPECTRA IV SE HORIZON SCAN SPEED LANGUAGE Scan speed is the degrees per second that the dome will pan when in a scan mode Scan speed is lt SYSTEM INFORMATION gt lt DISPLAY SETUP adjustable from 1 to 40 degrees per second through the programming menu The default setting lt DOME SETTINGS gt is 25 degrees per second EGLE CAMERA POWER PRESET FREEZE FRAME REBOOT SYSTEM EXIT This feature freezes the scene on the monitor when going to a preset This allows for smooth transition from one preset scene to another Preset freeze frame also reduces bandwidth when used with digital network systems such
34. EDIT HOLIDAY OCCURRENCE FIXED DATE MONTH JANUARY DAY 1 BACK EXIT a Use the joystick to position the cursor beside MONTH Press Iris Open Scroll through the options until the desired month appears Press Iris Open to select the month b Use the joystick to position the cursor beside DAY Press Iris Open Scroll through the options until the desired date appears Press Iris Open to select the day 5 f RELATIVE DATE was selected as the occurrence the following appears on the monitor a Use the joystick to position the cursor beside MONTH Press Iris Open Scroll through the options until the desired month appears Press Iris Open to select the month b Use the joystick to position the cursor beside WEEK Press Iris Open Scroll through the options until the desired week appears Press Iris Open to select the week C Use the joystick to position the cursor beside DAY Press Iris Open Scroll through the options until the desired day of the week appears Press Iris Open to select the day 71 PELCO SPECTRA IV SE HORIZON CLEAR HOLIDAY LANGUAGE lt SYSTEM INFORMATION gt Suna 1 Use the joystick to position the cursor beside CLEAR HOLIDAY To clear a holiday RESET CAMERA 2 Press Iris Open CYCLE CAMERA POWER REBOOT SYSTEM EXIT 3 Follow the directions displayed on the monitor LIST HOLIDAYS To list events CAMERAS 1 Use the joystick to position the cursor beside LIST HOLIDAYS lt
35. ERA POWER REBOOT SYSTEM EXIT 2 SYSTEM INFORMATION SERIAL DOME DRIVE MODEL BACK BOX MEMORY SOFTWARE VERSION FONT VERSION COMM D ADDRESS P ADDRESS 9500 MODE 32 PRESETS PROTOCOL lt ADDITIONAL gt BACK EXIT ADDITIONAL FREE MEMORY LAST RESET AZIMUTH ZERO OFFSET MOTOR ACTIVE CAMERA ACTIVE VIDEO LEVEL CAMERA MODEL LANGUAGE 1 LANGUAGE 2 LANGUAGE 3 LANGUAGE 4 LANGUAGE 5 LANGUAGE 6 LANGUAGE 7 LANGUAGE 8 LANGUAGE 9 LANGUAGE 10 BACK EXIT 9 07 The System Information screen displays dome drive model software version available memory and other diagnostic information System settings cannot be changed using this screen This screen is for reference only Use the following steps to display the System Information screen Use the joystick to position the cursor beside SYSTEM INFORMATION Press Iris Open The SYSTEM INFORMATION screen opens 27 Display Setup PELCO SPECTRA IV SE HORIZON LANGUAGE lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt lt DOME SETTINGS gt RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT DISPLAY SETUP PRESET LABEL ZONE LABEL ZOOM AZIMUTH ELEVATION DIRECTION ALARM MESSAGE DATE TIME lt LABEL POSITIONS gt RESTORE FACTORY DEFAULTS BACK EXIT 28 Display setup allows you to program how labels are displayed on the monitor The following labels are available PRESET LABEL ZONE LABEL ZOOM AZIMUTH ELEVATI
36. EVEL lt ADVANCED SETTINGS gt BACK EXIT 9 07 ZOOM LIMIT Zoom limit allows the user to define a limitation on the amount of telephoto zoom The settings vary depending on camera model The default setting is 70 Cameras with 420X zoom 35X optical zoom and 12X digital zoom can be set for 35X 70X 140 280X 350X or 420 ZOOM SPEED Zoom speed allows the user to define how fast the dome will go from full wide zoom to the 35X optical zoom Available zoom speed settings include the following HIGH 3 2 seconds MEDIUM default 4 6 seconds LOW 6 6 seconds NOTE When using the HIGH setting the image may be out of focus until zooming stops LOW LIGHT LIMIT Low light limit is the maximum duration in fractions of a second that the electronic shutter will remain open in low light conditions The default setting is 2 Settings include the following 2 1 2 second 8 1 8 second 30 1 30 second 4 1 4 second 15 1 15 second 60 1 60 second 31 IR CUT FILTER LANGUAGE lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt The camera have two modes of operation color and black white You can increase sensitivity in low light conditions by switching to black white mode removing the IR cut filter Color mode is lt DOME SETTINGS gt preferred in normal lighting conditions 2 SN The following are the settings for the IR cut filter REBOOT SYSTEM OFF Manual operation is controlled by prese
37. F OFF 21 ON OFF ON OFF ON OFF OFF OFF 22 OFF ON ON OFF ON OFF OFF OFF 23 ON ON ON OFF ON OFF OFF OFF 24 OFF OFF OFF ON ON OFF OFF OFF 25 ON OFF OFF ON ON OFF OFF OFF 26 OFF ON OFF ON ON OFF OFF OFF 27 ON ON OFF ON ON OFF OFF OFF 28 OFF OFF ON ON ON OFF OFF OFF 29 ON OFF ON ON ON OFF OFF OFF 30 OFF ON ON ON ON OFF OFF OFF 31 ON ON ON ON ON OFF OFF OFF 32 OFF OFF OFF OFF OFF OFF OFF 33 ON OFF OFF OFF OFF ON OFF OFF 34 OFF OFF OFF OFF OFF OFF 35 ON ON OFF OFF OFF ON OFF OFF 9 07 12 Table B Switch Settings for SW1 D Type Control Continued aeu SWITCH SETTING BODES SW1 2 SW1 3 SW1 4 SW1 5 SW1 6 SW1 7 SW1 8 36 OFF OFF ON OFF OFF ON OFF OFF 37 ON OFF ON OFF OFF ON OFF OFF 38 OFF ON ON OFF OFF ON OFF OFF 39 ON ON ON OFF OFF ON OFF OFF 40 OFF OFF OFF ON OFF ON OFF OFF m ON OFF OFF ON OFF ON OFF OFF 42 OFF ON OFF ON OFF ON OFF OFF 43 ON ON OFF ON OFF ON OFF OFF 44 OFF OFF ON ON OFF ON OFF OFF 45 ON OFF ON ON OFF ON OFF OFF 46 OFF ON ON ON OFF ON OFF OFF 47 ON ON ON ON OFF ON OFF OFF 48 OFF OFF OFF OFF ON ON OFF OFF 49 ON OFF OFF OFF ON ON OFF OFF 50 OFF ON OFF OFF ON ON OFF OFF 51 ON ON OFF OFF ON ON OFF OFF 52 OFF OFF ON OFF ON ON OFF OFF 53 ON OFF ON OFF ON ON OFF OFF 54 OFF ON ON OFF ON ON OFF OFF 55 ON ON ON OFF ON ON OFF OFF 56 OFF OFF OFF ON ON ON OFF OFF 57 ON OF
38. F OFF ON ON ON OFF OFF 58 OFF ON OFF ON ON ON OFF OFF 59 ON ON OFF ON ON ON OFF OFF 60 OFF OFF ON ON ON ON OFF OFF 61 ON OFF ON ON ON ON OFF OFF 62 OFF ON ON ON ON ON OFF OFF 63 ON ON ON ON ON ON OFF OFF 64 OFF OFF OFF OFF OFF OFF ON OFF 65 ON OFF OFF OFF OFF OFF ON OFF 66 OFF ON OFF OFF OFF OFF ON OFF 67 ON ON OFF OFF OFF OFF ON OFF 68 OFF OFF ON OFF OFF OFF ON OFF 69 ON OFF ON OFF OFF OFF ON OFF 70 OFF ON ON OFF OFF OFF ON OFF 9 07 Table B Switch Settings for SW1 D Type Control Continued SWITCH SETTING ADDRESS SW12 SW1 3 SW1 4 5 1 5 SW1 6 SW1 7 SW1 8 71 ON ON ON OFF OFF OFF ON OFF 72 OFF OFF OFF ON OFF OFF ON OFF 73 ON OFF OFF ON OFF OFF ON OFF 74 OFF ON OFF ON OFF OFF ON OFF 75 ON ON OFF ON OFF OFF ON OFF 76 OFF OFF ON ON OFF OFF ON OFF 77 ON OFF ON ON OFF OFF ON OFF 78 OFF ON ON ON OFF OFF ON OFF 79 ON ON ON ON OFF OFF ON OFF 80 OFF OFF OFF OFF ON OFF ON OFF 81 ON OFF OFF OFF ON OFF ON OFF 82 OFF ON OFF OFF ON OFF ON OFF 83 ON ON OFF OFF ON OFF ON OFF 84 OFF OFF ON OFF ON OFF ON OFF 85 ON OFF ON OFF ON OFF ON OFF 86 OFF ON ON OFF ON OFF ON OFF 87 ON ON ON OFF ON OFF ON OFF 88 OFF OFF OFF ON ON OFF ON OFF 89 ON OFF OFF ON ON OFF ON OFF 90 OFF ON OFF ON ON OFF ON OFF 91 ON ON OFF ON ON OFF ON OFF 92 OFF OFF ON ON ON OFF ON OFF 93 ON OFF ON ON ON OFF ON OFF 94 OFF ON ON ON ON
39. For matrix systems that do not output V Sync there are two settings for line synchronization CYCLE CAMERA POWER REBOOT SYSTEM ON default Adjusts the phase of the line sync to synchronize input power Line sync phase EXIT settings range from zero to 359 degrees OFF The dome synchronizes to the internal clock DOME SETTINGS lt CAMERA gt lt MOTION gt lt POWER UP gt lt LINE SYNC gt lt PRESETS gt lt PATTERNS gt lt ZONES gt lt WINDOW BLANKING gt lt ALARMS gt lt AUX gt lt TITLE TEXT gt lt CLEAR gt lt PASSWORD gt lt CLOCK gt lt EVENT gt BACK EXIT LINE SYNC LINE SYNC LINE SYNC PHASE 9 07 45 PRESETS NOTE The model of the back box you are using limits the number of programmable presets that can be stored and 46 retrieved in the back bo number of presets avail number of stored prese Spectra IV SE Horizon dome systems have 256 preset posi 100 256 able to the dome drive However Back Box Series Model Number of Stored Presets Spectra Spectra SE Spectra Ill BB53 99 15 Spectra IV BB4 128 256 Each of the user definable presets can be programmed to The following presets are predefined for specific functions Preset 33 34 83 87 88 89 90 91 92 93 94 95 96 97 98 99 Action Flip command Pans the dome drive 180 degrees Pan zero command Directs the dome drive to the factory determined zero re
40. INSTALLATION OPERATION Spectra IV SE Horizon Series Dome Drive 3434 9 07 Contents finu EE 6 Installation Gaur hea kasqaqa qampusakaqyaququyaqugasuaq 7 5222 2 __ __ 7 SWI Receiver Address panned ukasa dae Ede dey yaqa seeds 7 SW2 Switches 1 3 Special System 5 5 8 oW2 Switches 4 5 Serial Port Setting S emi save 8 SW2 Switches 6 8 Baud 5 8 Dome Drive Installati n iuo RE De PI RR ete 9 Getting Started 19 How to Your Dome 20 Quick Programming GU e tbe e ad 21 Accessing Main Menu Preset 95 21 CMB6700 6MDBB U PR Ra due 21 KBD200A KBD300A Direct Mode Only 21 Mb P nies Mae ee saq 22 9740 9760 9770 9780 22 KBD40007KBD 40022 5 etre teen te
41. L gt To disable a zone a zone is enabled automatically when it is programmed or to blank a zone ED 1 Move the cursor beside ZONE ENABLED or ZONE BLANKING ZONE BLANKING lt CLEAR ZONE gt BACK 3 Move the joystick up or down to view selections Press Iris Open to enter selection EXIT 2 Press Iris Open The cursor moves to the right To clear a zone 1 Use the joystick to position the cursor beside CLEAR ZONE 2 Press Iris Open Follow the instructions on the screen 9 07 53 WINDOW BLANKING Window blanking allows a user to program four sided areas that cannot be viewed by the operator of the dome system A blanked area will move with pan and tilt functions and automatically adjust in size as the lens zooms telephoto and wide PELCO SPECTRA IV SE HORIZON LANGUAGE lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt SETTINGS The Spectra IV SE Horizon dome system has eight available user defined window blanks and two styles of window blanking Gray and Smear If the style is set to Gray the blanked area is covered RESET CAMERA with a solid gray window If Smear is selected images behind the window will be noticeable but CYCLE CAMERA POWER Td REBOOT SYSTEM not distinguishable EXIT To set window blanking area 1 Use the joystick to position the cursor beside WINDOW BLANKING Press Iris Open The WINDOW BLANKING menu appears on the screen lt MOTION
42. N COMM ALARM MESSAGE D ADDRESS DATE TIME P ADDRESS 9500 MODE LABEL POSITIONS 32 PRESETS RESTORE FACTORY DEFAULTS PROTOCOL lt ADDITIONAL gt FREE MEMORY XXXXXX LAST RESET POWER ON AZIMUTH ZERO OFFSET MOTOR ACTIVE CAMERA ACTIVE VIDEO LEVEL NORMAL CAMERA MODEL LANGUAGE 1 ENGLISH SAVE AND EXIT CANCEL AND EXIT LANGUAGE 10 ITALIANO X XX CAMERA ADVANCED SETTINGS MOTION POWER UP TYPE OF LIGHTING OUTDOOR SHUTTER SPEED AUTO FLIP POWER UP ACTION AUTO FOCUS AGC LIMIT PROPORTIONAL PAN ZOOM LIMIT AUTO IRIS PARK TIME MINUTES ZOOM SPEED AUTO IRIS LEVEL PARK ACTION AUTO IRIS PEAK SCAN SPEED DEG S LOW IGRT LIMIT AUTO SHARPNESS PRESET FREEZE FRAME AUTO IR LEVEL SHARPNESS LEVEL LIMIT STOPS ADVANCED SETTINGS AUTO WHITE BALANCE SET MANUAL STOPS gt RGAIN CLEAR MANUAL STOPS B GAIN SET SCAN STOPS BACKLIGHT COMP CLEAR SCAN STOPS VIDEO LEVEL SET AZIMUTH ZERO WIDE DYNAMIC RANGE CLEAR AZIMUTH ZERO E IMAGE STABILIZER REFERENCE INFORMATION MANUAL LIMITS SET SCAN LIMITS SET ZONES WINDOW BLANKING SET WINDOWS ZONE NUMBER STYLE WINDOW NUMBER 70NE NOT DEFINED BLANK ALL ABOVE EDIT WINDOW LOCATION EDIT ZONE LABEL BLANK ALL BELOW EDIT WINDOW ZOOM gt EDIT ZONE gt SET WINDOWS EDIT SCHEDULE ZONE ENABLED ENABLE WINDOW ZONE BLANKING REVERSE CLEAR ZONE CLEAR WINDOW CLEAR PASSWORD EDIT THE PASSWORD CLOCK CLEAR ALL ZONES ENABLE PASSWORD 123456789
43. OFF OFF OFF ON 132 OFF OFF ON OFF OFF OFF OFF ON 133 ON OFF ON OFF OFF OFF OFF ON 134 OFF ON ON OFF OFF OFF OFF ON 135 ON ON ON OFF OFF OFF OFF ON 136 OFF OFF OFF ON OFF OFF OFF ON 137 ON OFF OFF ON OFF OFF OFF ON 138 OFF ON OFF ON OFF OFF OFF ON 139 ON ON OFF ON OFF OFF OFF ON 140 OFF OFF ON ON OFF OFF OFF ON 9 07 Table B Switch Settings for SW1 D Type Control Continued THT SWITCH SETTING ADDRESS SW1 2 SW1 3 SW1 4 SW1 5 SW1 6 SW1 7 SW1 8 141 ON OFF ON ON OFF OFF OFF ON 142 OFF ON ON ON OFF OFF OFF ON 143 ON ON ON ON OFF OFF OFF ON 144 OFF OFF OFF OFF ON OFF OFF ON 145 ON OFF OFF OFF ON OFF OFF ON 146 OFF ON OFF OFF ON OFF OFF ON 147 ON ON OFF OFF ON OFF OFF ON 148 OFF OFF ON OFF ON OFF OFF ON 149 ON OFF ON OFF ON OFF OFF ON 150 OFF ON ON OFF ON OFF OFF ON 151 ON ON ON OFF ON OFF OFF ON 152 OFF OFF OFF ON ON OFF OFF ON 153 ON OFF OFF ON ON OFF OFF ON 154 OFF ON OFF ON ON OFF OFF ON 155 ON ON OFF ON ON OFF OFF ON 156 OFF OFF ON ON ON OFF OFF ON 157 ON OFF ON ON ON OFF OFF ON 158 OFF ON ON ON ON OFF OFF ON 159 ON ON ON ON ON OFF OFF ON 160 OFF OFF OFF OFF OFF ON OFF ON 161 ON OFF OFF OFF OFF ON OFF ON 162 OFF ON OFF OFF OFF ON OFF ON 163 ON ON OFF OFF OFF ON OFF ON 164 OFF OFF ON OFF OFF ON OFF ON 165 ON OFF ON OFF OFF ON OFF ON 166 OFF ON ON OFF OFF ON OFF ON 167 ON ON ON OFF OFF
44. ON DIRECTION ALARM MESSAGE DATE TIME EVENT LABEL dentifies preset dentifies zone dentifies the amount of magnification Amount of pan from zero degrees vertical and the amount of tilt from zero degrees horizontal Displays compass direction isplays activated alarm isplays current date and time U U U isplays activated event A preset label is displayed when a preset is called A zone label is displayed when the system moves into a zone The zoom ratio label is displayed when zoom 5 activated Azimuth elevation and direction labels are displayed when pan tilt is activated An alarm message appears on the monitor when an alarm occurs An event label appears on the monitor when an event occurs The following settings are available for each label except date and time OFF CONSTANT 2 SECONDS 5 SECONDS 10 SECONDS Label is not displayed when activated The label is continually displayed when activated The label is displayed for 2 seconds after activation The label is displayed for 5 seconds after activation The label is displayed for 10 seconds after activation The settings for date and time are ON or OFF 1 Azimuth is the pan angle from zero to 359 degrees Elevation is the tilt position from 18 to 90 degrees 3434 9 07 LABEL POSITIONS PELCO SPECTRA IV SE HORIZON LANGUAGE lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt lt DOME SETTINGS gt RESET CAMERA CYCLE CAMERA POWER
45. ON OFF ON 168 OFF OFF OFF ON OFF ON OFF ON 169 ON OFF OFF ON OFF ON OFF ON 170 OFF ON OFF ON OFF ON OFF ON 171 ON ON OFF ON OFF ON OFF ON 172 OFF OFF ON ON OFF ON OFF ON 173 ON OFF ON ON OFF ON OFF ON 174 OFF ON ON ON OFF ON OFF ON 175 ON ON ON ON OFF ON OFF ON 9 07 16 Table B Switch Settings for SW1 D Type Control Continued SWITCH SETTING ADDRESS SW12 SW1 3 SW1 4 5 1 5 SW1 6 SW1 7 SW1 8 176 OFF OFF OFF OFF ON ON OFF ON 177 ON OFF OFF OFF ON ON OFF ON 178 OFF ON OFF OFF ON ON OFF ON 179 ON ON OFF OFF ON ON OFF ON 180 OFF OFF ON OFF ON ON OFF ON 181 ON OFF ON OFF ON ON OFF ON 182 OFF ON ON OFF ON ON OFF ON 183 ON ON ON OFF ON ON OFF ON 184 OFF OFF OFF ON ON ON OFF ON 185 ON OFF OFF ON ON ON OFF ON 186 OFF ON OFF ON ON ON OFF ON 187 ON ON OFF ON ON ON OFF ON 188 OFF OFF ON ON ON ON OFF ON 189 ON OFF ON ON ON ON OFF ON 190 OFF ON ON ON ON ON OFF ON 191 ON ON ON ON ON ON OFF ON 192 OFF OFF OFF OFF OFF OFF ON ON 193 ON OFF OFF OFF OFF OFF ON ON 194 OFF ON OFF OFF OFF OFF ON ON 195 ON ON OFF OFF OFF OFF ON ON 196 OFF OFF ON OFF OFF OFF ON ON 197 ON OFF ON OFF OFF OFF ON ON 198 OFF ON ON OFF OFF OFF ON ON 199 ON ON ON OFF OFF OFF ON ON 200 OFF OFF OFF ON OFF OFF ON ON 201 ON OFF OFF ON OFF OFF ON ON 202 OFF ON OFF ON OFF OFF ON ON 203 ON ON OFF ON OFF OFF ON ON 204
46. S lt CAMERA gt lt MOTION gt lt POWER UP gt lt LINE SYNC gt lt PRESETS gt lt PATTERNS gt lt ZONES gt lt WINDOW BLANKING gt lt ALARMS gt lt AUX gt lt TITLE TEXT gt lt CLEAR gt lt PASSWORD gt lt CLOCK gt lt EVENT gt BACK EXIT EVENT EVENT TYPE EVENT LABEL lt EDIT EVENT LABEL gt lt EDIT EVENT gt lt CLEAR EVENT gt lt LIST EVENT gt HOLIDAY lt EDIT HOLIDAY gt lt CLEAR HOLIDAY gt lt LIST HOLIDAYS gt BACK EXIT REFERENCE INFORMATION 12 00 AM NONE 70 CLEAR EVENT To clear an event 1 Use the joystick to position the cursor beside CLEAR EVENT 2 Press Iris Open 3 Follow the directions displayed on the monitor LIST EVENT To list events 1 Use the joystick to position the cursor beside LIST EVENT 2 Press Iris Open 3 All programmed events will be listed HOLIDAY Use the following steps to create a new holiday 1 Use the joystick to position the cursor beside HOLIDAY Press Iris Open 2 Move the joystick up or down to scroll through the options If no holidays have been created in the past NEW is the only selectable option Press Iris Open to select NEW 3 Proceed to the Edit Holiday section on page 71 Use the following steps to manage an existing holiday 1 Use the joystick to position the cursor beside HOLIDAY Press Iris Open 2 Move the joystick up or down to scroll through the holidays Press Iris Open to enter selection 3 P
47. STEM the settings for time base POWER LINE This is the most accurate time base and is the preferred selection in areas with a stable power line frequency INTERNAL CLOCK The internal clock should be used in areas where the power line frequency is not accurate lt CAMERA gt MOTION POWER UOS a Move the joystick up or down to view the selections lt LINE SYNC gt lt PRESETS gt b Press Iris Open to select INTERNAL CLOCK or POWER LINE lt PATTERNS gt NDAN BLANKING gt 2 Use the joystick to position the cursor beside TIME FORMAT Press Iris Open Move the MR joystick up or down to view the selections Select 12 HOUR or 24 HOUR and then press Iris poste Open to confirm the time format CLEAR E 3 Use the joystick to position the cursor beside SET TIME Press Iris Open Scroll through the EVENT hours until the desired time appears Use the joystick to move the cursor to the right Scroll BACK hrough the minutes until the desired time appears Press Iris Open to select the time EXIT 4 Use the joystick to position the cursor beside DATE FORMAT Press Iris Open Move the oystick up or down to select MM DD YYYY or DD MM YYYY Press Iris Open to confirm he date format 5 Use the joystick to position the cursor beside SET DATE Press Iris Open Scroll through the ME Pm days months and years until the desired number appears Press Iris Open to select the SET TIME date Sus 6 Use the joys
48. T The main menu appears on the monitor 4 Select the Quit icon to return to the default menu KBD4000 KBD4002 1 Press the SPOT MONITOR key 2 Enter 95 then hold the PRESET key approximately five seconds until the main menu appears on the screen MPT9500 Standard Coaxitron Mode 1 Enter 95 and press the PRESET SET key 2 Position the asterisk in the YES row and press the F1 key The main menu appears Extended Coaxitron or RS 485 Mode 1 Enter 95 and press the PRESET SET key 2 Press the F2 key The main menu appears 9 07 NET300 NET350 NET4001A 1 Check the Set box 2 Click the preset 95 button The main menu appears ENDURA WORKSTATION 1 Right click in the video pane of the Spectra SE Horizon dome system 2 Click Preset and then click Select Preset 3 Enter 95 and then click OK VCD5000 1 Enter 95 for the preset action The shortcuts menu appears 2 Press the Preset button on the KBD5000 9 07 23 Spectra IV SE Horizon Menu Tree PELCO SPECTRA IV SE HORIZON LANGUAGE ENGLISH lt 5 5 INFORMATION gt DISPLAY SETUP DOME SETTINGS RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT SYSTEM INFORMATION DISPLAY SETUP SERIAL PRESET LABEL 2 SECS DOME DRIVE MODEL XX XXXX ZONE LABEL 2 SECS BACK BOX MEMORY AVAILABLE ZOOM 2 SECS SOFTWARE VERSION AZIMUTH ELEVATION FONT VERSION DIRECTIO
49. TINGS gt RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT DOME SETTINGS lt CAMERA gt lt MOTION gt lt POWER UP gt lt LINE SYNC gt lt PRESETS gt lt PATTERNS gt lt ZONES gt lt WINDOW BLANKING gt lt ALARMS gt lt AUX gt lt TITLE TEXT gt lt CLEAR gt lt PASSWORD gt lt CLOCK gt lt EVENT gt BACK PRESETS SEDIT INGS gt MOTION DETECTION lt EDIT SCHEDULE gt lt CLEAR PRESET gt lt CLEAR CAMERA SETTINGS gt BACK EXIT REFERENCE INFORMATION MOTION DETECTION MOTION DETECTION ENABLED lt EDIT DETECTION AREAS gt ACTIVATE AUX AUX TIME SECS BACK EXIT 9 07 ACTIVATE AUX COMMAND Motion detection can be programmed to trigger an auxiliary command when motion is detected The following are the settings for ACTIVATE AUX OFF default Motion detection will not trigger an AUX command 1 Triggers a command to AUX 1 2 Triggers a command to AUX 2 AUX TIME Aux time is the length of time the auxiliary will remain on after motion is detected Available settings for AUX TIME are 1 through 60 seconds EDIT SCHEDULE The Edit Schedule menu is a duplicate of the Edit Event menu in the Event section with the following exceptions In the Edit Schedule menu the event type cannot be changed Also the Holiday feature cannot be accessed from the Edit Schedule menu For instructions on changing the features in the Edit Schedule menu refer to t
50. VEL AUTO WHITE BALANCE R GAIN B GAIN BACKLIGHT COMP VIDEO LEVEL WIDE DYNAMIC RANGE PROGRESSIVE SCAN E IMAGE STABILIZER BACK EXIT 9 07 VIDEO LEVEL Set the video output to one of the following NORMAL 1 0 volt peak to peak HIGH default setting 1 2 volt peak to peak to compensate for losses in video cable WIDE DYNAMIC RANGE Wide dynamic range WDR balances the brightest and darkest sections of a scene to produce picture that is better balanced in lighting and provides more detail Available settings are OFF and ON The default setting is OFF When wide dynamic range is set to ON the frame rate is reduced from the standard 30 frames per second to 15 frames per second NOTE Wide dynamic range is disabled when electronic image stabilization is set to 5 Hz or 10 Hz Wide Dynamic Range ON Wide Dynamic Range OFF 37 ELECTRONIC IMAGE STABILIZATION LANGUAGE Electronic image stabilization is a feature of the camera that can compensate for some forms of lt SYSTEM INFORMATION gt external influences all cases care should be taken to make sure that any dome system is DISPLAY SETUP gt Mn DOME SETTINGS mounted to a rigid location RESET CAMERA n the event that vibration is introduced to the dome system a user can select one of the CYCLE LAMERA POWER electronic image stabilization settings in the menu The available settings are OFF 5 Hz and REBOOT SYSTEM i EXIT 10 Hz
51. YSTEM INFORMATION gt lt DISPLAY SETUP gt DOME SETTINGS Controller keyboard commands cannot override password protected settings If a keyboard is used to set a preset pattern or zone the Enter Password screen appears on the monitor RESET CAMERA i i CVE CAMERA ROWER The password must be entered before programming can continue REBOOT SYSTEM EXIT At least one character must be entered to create a valid password DOME SETTINGS lt CAMERA gt lt MOTION gt lt POWER UP gt lt LINE SYNC gt lt PRESETS gt lt PATTERNS gt lt ZONES gt lt WINDOW BLANKING gt lt ALARMS gt lt AUX gt lt TITLE TEXT gt lt CLEAR gt lt PASSWORD gt lt CLOCK gt lt EVENT gt BACK EXIT PASSWORD ENABLE PASSWORD lt EDIT PASSWORD gt BACK EXIT EDIT THE PASSWORD 1234567890 ABCDEFGHIJ CANCEL KLMNOPORST UVWXYZ SPACE abcdefghij BACKSPACE klmnopqrst uvwxyz C3434M A 9 07 63 CLOCK The clock is used to program the current date and time The date and time set in the Clock menu TEE is used to program events The date and time can also be displayed on the monitor when the menus not being accessed refer to Display Setup on 28 lt DISPLAY SETUP gt DOME SETTINGS To program the clock do the following RESET CAMERA 1 Usethe joystick to position the cursor beside TIME BASE Press Iris Open The following are CYCLE CAMERA POWER PEBHUT SY
52. as 1 Edit detection areas 1 2 3 or 4 a Use the joystick to position the cursor beside EDIT DETECTION AREAS b Press Iris Open The EDIT DETECTION AREAS programming window appears on the monitor c Use the joystick to position the cursor beside LOCATION for DETECTION AREA 1 2 3 or 4 d Press Iris Open The cursor moves to the right next to the number 0 Move the joystick up A blue square appears in the upper left hand corner of the screen f Use the joystick to place the blue square over the desired detection area g Press Iris Open to make a selection 2 Set the sensitivity of the motion detection area a Position the cursor next to SENSITIVITY for DETECTION AREA 1 2 3 or 4 b Press Iris Open the cursor moves to the right c Use the joystick to select one of the following sensitivity levels HIGH The sensitivity level is high MEDIUM default Average sensitivity LOW The sensitivity level is low d Press Iris Open to make selection 49 EDIT DETECTION AREAS DETECTION AREA 1 LOCATION 0 SENSITIVITY MEDIUM DETECTION AREA 2 LOCATION 0 SENSITIVITY MEDIUM DETECTION AREA 3 LOCATION 0 SENSITIVITY MEDIUM DETECTION AREA 4 LOCATION 0 SENSITIVITY MEDIUM BACK EXIT MOTION DETECTION AREAS NOTE Motion detection is not guaranteed to catch 100 of activity 3434 9 07 PELCO SPECTRA IV SE HORIZON LANGUAGE lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt lt DOME SET
53. ase the auto iris level setting Auto Iris Peak Increasing the peak value will cause the auto iris circuit to react more to highlights or peaks in the picture Decreasing this value will cause it to use the average video level to adjust the iris 9 07 PELCO SPECTRA IV SE HORIZON LANGUAGE lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt lt DOME SETTINGS gt RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT DOME SETTINGS lt CAMERA gt lt MOTION gt lt POWER UP gt lt LINE SYNC gt lt PRESETS gt lt PATTERNS gt lt ZONES gt lt WINDOW BLANKING gt lt ALARMS gt lt AUX gt lt TITLE TEXT gt lt CLEAR gt lt PASSWORD gt lt CLOCK gt lt EVENT gt BACK EXIT CAMERA TYPE OF LIGHTING AUTO FOCUS ZOOM LIMIT ZOOM SPEED LOW LIGHT LIMIT IR CUT FILTER AUTO IR LEVEL lt ADVANCED SETTINGS gt BACK EXIT ADVANCED SETTINGS SHUTTER SPEED AGC LIMIT AUTO IRIS AUTO IRIS LEVEL AUTO IRIS PEAK AUTO SHARPNESS SHARPNESS LEVEL AUTO WHITE BALANCE R GAIN B GAIN BACKLIGHT COMP VIDEO LEVEL WIDE DYNAMIC RANGE PROGRESSIVE SCAN E IMAGE STABILIZER BACK EXIT 9 07 AUTO SHARPNESS Auto sharpness enhances picture detail by increasing the aperture gain of the camera and sharpening the edges in the picture There are two settings ON default The camera automatically maintains a normal sharpness mode OFF The sharpness of the picture is s
54. c The camera is not sensitive to IR light when the IR cut filter is IN 32 9 07 ADVANCED CAMERA SETTINGS PELCO SPECTRA IV SE HORIZON LANGUAGE lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt lt DOME SETTINGS gt RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT DOME SETTINGS lt CAMERA gt lt MOTION gt lt POWER UP gt lt LINE SYNC gt lt PRESETS gt lt PATTERNS gt lt ZONES gt lt WINDOW BLANKING gt lt ALARMS gt lt AUX gt lt TITLE TEXT gt lt CLEAR gt lt PASSWORD gt lt CLOCK gt lt EVENT gt BACK EXIT CAMERA TYPE OF LIGHTING AUTO FOCUS ZOOM LIMIT ZOOM SPEED LOW LIGHT LIMIT IR CUT FILTER AUTO IR LEVEL lt ADVANCED SETTINGS gt BACK EXIT ADVANCED SETTINGS SHUTTER SPEED AGC LIMIT AUTO IRIS AUTO IRIS LEVEL AUTO IRIS PEAK AUTO SHARPNESS SHARPNESS LEVEL AUTO WHITE BALANCE R GAIN B GAIN BACKLIGHT COMP VIDEO LEVEL WIDE DYNAMIC RANGE PROGRESSIVE SCAN E IMAGE STABILIZER BACK EXIT 9 07 SHUTTER SPEED Shutter speed is the duration of the electronic shutter Program shutter speed to operate automatically Auto or manually Numeric Value AUTO default The electronic shutter speed is set automatically by the amount of light sensed by the camera NUMERIC VALUE Spectra SE Horizon dome systems have several numerical shutter speed settings The higher the number the faster the electronic shutter
55. e set to the ON position if a two wire serial port connection is used with RS485 This setting is used to allow the Spectra dome system to transmit and receive commands on the same pair of wires Only two wires should be connected to the RX and RX connectors on the circuit board inside the back box SW2 SWITCHES 6 8 BAUD SETTINGS Pelco s D type controllers are set for 2400 baud The default setting for the dome drive is 2400 baud If you are using Pelco D type controller do not reset SW2 switches 1 through 3 or SW2 switches 6 through 8 P type controllers can operate at 2400 4800 and 9600 baud Set the SW2 switches 6 7 and 8 located on the base of the dome drive to the same baud as the P type controller Switch Number SW2 6 SW2 7 SW2 8 2400 Baud default for D type control Off Off Off 4800 Baud default for P type control On Off Off 9600 Baud Off On Off SW2 Switch 9 Coaxial UTP Cable SW2 9 should be set to the OFF position default if you are using coaxial cable If you are using unshielded twisted pair UTP cable set SW2 9 to the ON position SW2 Switch 10 Termination Setting When connecting more than one Spectra IV SE Horizon dome system to a single controller terminate the unit farthest from the controller Termination is only required for the last dome in the series The dome drive is shipped from the factory in the unterminated OFF position To terminate the dome drive set SW2 1
56. e the relay in the dome and operate the device that is connected to the relay The output of AUX 1 can be connected to the alarm input of a System switch to activate automatic monitor switching and recording An AUX 2 command from the controller will place a ground at the output of AUX 2 to operate the device that is connected to it The following are the available aux mode settings TOGGLE default Changes the state of the auxiliary output every time an AUX command is received from the controller LATCHING Must receive an AUX ON AUX OFF command from the controller to turn the auxiliary output on off MOMENTARY An AUX ON command from the controller turns the auxiliary output on for the programmed DWELL TIME The auxiliary output will automatically turn off when the dwell time is finished EDIT SCHEDULE The Edit Schedule menu is a duplicate of the Edit Event menu in the Event section with the following exceptions In the Edit Schedule menu the event type cannot be changed Also the Holiday feature cannot be accessed from the Edit Schedule menu For instructions on changing the features in the Edit Schedule menu refer to the Edit Event section on page 69 9 07 TITLE TEXT Title text is the label used to identify the camera viewed on the monitor Up to 20 characters can LANGUAGE be used for a title SSYS TEM INFORMATIONS To edit the title text label do the following DISPLAY SETUP DOME SETTINGS
57. e years on Spectra IV and Spectra IV SE Horizon products hree years on Genex Series products multiplexers server and keyboard hree years on Camclosure and fixed camera models except the CC3701H 2 CC3701H 2X CC3751H 2 CC3651H 2X MC3651H 2 3651 2 camera models which have a five year warranty hree years on PMCL200 300 400 Series LCD monitors wo years on standard motorized or fixed focal length lenses wo years on Legacy CM6700 CM6800 CM9700 Series matrix and DF5 DF8 Series fixed dome products wo years on Spectra 111 Esprit ExSite and 520 scanners including when used in continuous motion applications wo years on Esprit and WW5700 Series window wiper excluding wiper blades wo years except lamp and color wheel on Digital Light Processing DLP 9 isplays The lamp and color wheel will be covered for a period of 90 days he air filter is not covered under warranty Eighteen months on DX Series digital video recorders NVR300 Series network video recorders and Endura Series distributed network based video products One year except video heads on video cassette recorders VCRs Video heads will be covered for a period of six months Six months on all pan and tilts scanners or preset lenses used in continuous motion applications that is preset scan tour and auto scan modes Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco sh
58. eee 22 9 22 00 350 400 2 23 Endura Workstation 2222222222222 2 2 2 2 2 2 2 2 4 4 23 VGD50002 here p Eee t E DR e eret 23 Spectra SE Horizon Mehl TEE ns Ee teer OO 24 UE DS EIER 26 System hens 27 DiSplayiSetup rne 28 RR I ME 29 DOME tate 30 El canted E mamaqa wed 30 peoi GONIN 30 AUTOFOCUS LE ELA Salas saqsa 30 Vio dir MT Em 31 ZOGITIESDBOU neem seda acd 31 Low Light III e 31 laedi MERECE 32 Advanced Camera 05 2 2222 2 2 2 33 9 07 3 Shutter Speed der ee TUE TH das ame IR EN hie sas 33 ae ere 33 AUTON Pc 2 34 Auto
59. et manually by programming the sharpness level Sharpness level settings range from 0 63 AUTO WHITE BALANCE This feature automatically processes the viewed image to retain color balance over a color temperature range The default setting for auto white balance is ON R GAIN Adjusts the picture output in the red range As you change the value you will see the color change on your monitor B GAIN Adjusts the picture output in the blue range As you change the value you will see the color change on your monitor 35 BACKLIGHT COMPENSATION BLC PELCO SPECTRA IV SE HORIZON LANGUAGE If a bright backlight is present the subjects in the picture may appear dark or as a silhouette lt SYSTEM INFORMATION gt Backlight compensation enhances objects in the center of the picture The dome uses the center lt DISPLAY SETUP gt M PD ME lt DOME SETTINGS of the picture to adjust the iris If there is a bright light source outside of this area it will wash out to white The camera will adjust the iris so that the object in the sensitive area is properly RESET CAMERA exposed CYCLE CAMERA POWER REBOOT SYSTEM EXIT There are two backlight compensation settings ON Backlight compensation is activated OFF default Backlight compensation is not activated NOTE If backlight compensation is ON decrease the auto iris level setting and adjust the auto POWER UP IR level to a darker setting Refer to the Auto Iris Leve
60. ference point Reserved IR filter IN color IR filter OUT black white Manual limit stops Scan limit stops Reserved Select main programming menu Stop a scan Random scanning Frame scanning Start auto scanning memory If you are using an older model back box you may program and use up to the maximum the dome drive is changed the back box model will limit the 5 available to the new dome drive Refer to the table below for more information ions The programmable presets are numbered 1 32 35 82 and use pan tilt camera settings and motion detection 3434 9 07 NOTE For American Dynamics controllers with only 32 presets switch SW2 1 on the dome drive to the ON position When SW2 1 is ON preset PELCO SPECTRA IV SE HORIZON LANGUAGE 2S VS TEM INFORMATIONS 99 becomes 32 92 becomes 25 DISPLAY SETUP 98 becomes 31 91 becomes 24 97 becomes 30 90 becomes 23 96 becomes 29 89 becomes 22 CYCLE CAMERA POWER 95 becomes 28 88 becomes 21 REBOOT SYSTEM 93 becomes 26 EXIT If the limit stops are turned off presets 23 26 be used as regular presets Use the following steps to program a preset DOME SETTINGS 1 CAMERA Use the joystick to position the cursor beside PRESET NUMBER Press Iris Open lt LINE SYNC gt The cursor moves to the right PRESETS PATTERNS ZONES WINDOW BLANKING gt lt ALARMS gt 2 Edit the preset label lt AUX
61. ging programmed dome settings 74 9 07 Software Language File Upload The RJ 45 data port of the dome drive allows access for on site setup testing and uploading of revised operating software and language files A Pelco field service tool is required to perform these operations Field service tools include Pelco s remote monitor kit IPS RMK remote data port box IPS RDPE 2 and remote monitor cable IPS CABLE For instructions on how to upload revised operating software and language files refer to the Installation Operation manual supplied with the field service tool NOTE Only perform software uploads when necessary Software uploads do not need to be performed if the dome system is operating properly During a software language file upload a progress bar will appear on the monitor to indicate data is being transferred to the Spectra dome system The default setting for data transmission is 115 2 KB per second Noisy and long run connections will slow the transmission rate 9 07 75 76 Suggested Preventative Maintenance The Spectra IV SE Horizon dome systems do not require any special maintenance Occasionally dust may build up on the inside or the outside of the dome If this occurs turn power to the unit off and remove the lower dome from the back box Remove the dust from the lower dome using compressed air from a spray can Replace the lower dome following the installation instructions
62. gt lt TITLE TEXT gt a Use the joystick to position the cursor beside EDIT PRESET LABEL lt CLEAR gt lt PASSWORD gt lt CLOCK gt lt EVENT gt Select the preset number b Move the joystick up or down to view selections Press Iris Open to enter selection b Press Iris Open The following appears on the monitor BACK EXIT LABEL FOR PRESET PRESET NUMBER 1234567890 ABCDEFGHIJ KLMNOPORST UVWXYZ abcdefghij BACKSPACE klmnopqrst uvwxyz PRESETS 1 lt MOTION DETECTION gt lt EDIT SCHEDULE gt c Use the joystick to position the cursor beside a character Press Iris Open to enter selection To clear a character position the cursor beside BACKSPACE and then press CLEAR PRESET gt lt CLEAR CAMERA SETTINGS gt Iris Open BACK r EXIT d When label is completed move the cursor to OK Press Iris Open to return to the REFERENCE INFORMATION AZIMUTH Preset menu ELEVATION ZOOM RATIO CUSTOM CAMERA SETTINGS Edit the preset scene a Use the joystick to position the cursor beside EDIT PRESET SCENE b Press Iris Open c Follow the directions displayed on the monitor 9 07 47 4 Edit preset camera settings LANGUAGE a Use the joystick to position the cursor beside EDIT CAMERA SETTINGS lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt lt DOME SETTINGS b Press Iris Open The EDIT CAMERA SETTINGS window appears on the monitor Refe
63. he Edit Event section on page 69 51 PATTERNS A pattern is a memorized repeating series of pan tilt zoom and preset functions that can be TANGUAGE recalled with a command from a controller or automatically by a programmed function alarm lt SYSTEM INFORMATION gt park event or power up lt DISPLAY SETUP gt DOME SETTINGS The Spectra IV SE Horizon can handle up to eight patterns Pattern length is based upon memory usage rather than a fixed amount of time The complexity of a pattern will determine the amount RESET CAMERA of storage available to program other patterns CYCLE CAMERA POWER REBOOT SYSTEM EXIT NOTE most cases the memory available will allow for ample time to schedule typical patterns If the scheduled patterns are unusually lengthy or complex there is a possibility that there may not be enough remaining memory to program all eight patterns To program a pattern DOME SETTINGS 1 ANETE Use the joystick to position the cursor beside PATTERN NUMBER Press Iris Open lt MOTION gt The cursor moves to the right lt POWER UP gt M SLINE SYNC 2 Move the joystick up or down to view selections Press Iris Open to enter selection lt gt 3 Use the joystick to position the cursor beside PROGRAM PATTERN Br MEE 4 Press Iris Open The Patterns programming window appears on the monitor AUX STITLE TEXT gt 5 Follow the directions displayed on the monitor lt CLEAR gt
64. iE cae 52 cs N _ 53 Window 54 ETE SCG UING 55 IET an sma Das ash re estas TUTUP 55 Gear WVINGOW 55 Blank All Above Blank All deh REPE et 56 mansana s een ated Gasket RET 57 Puer tiara imaman s 60 Edit Schedule 60 ee 61 HAEE s E S oe pene ea nad uns suy Sasu a ass 62 sS 63 B c T O O IOI O Ce i mee 64 s s oh dde PL 67 Event NYG rU 67 Ped hte LA a na 67 sea s a upya aa 68 SE 69 9 07 Clean Event e 70 MS EVEN LEUTEN 70 Holiday Du 70 eater ca eg E E ee 71 Cleat Holiday E DI RE 72 ab IER 72 Scheduled EVENTS acc tuae
65. ion Once you let go of the joystick after the dome rotates joystick control returns to normal operation The auto flip feature is useful for following a person who passes directly beneath the dome There are two auto flip modes ON default Auto flip mode is enabled OFF Auto flip mode 15 disabled PROPORTIONAL PAN Proportional pan automatically reduces or increases the pan and tilt speeds in proportion to the amount of zoom At telephoto zoom settings the pan and tilt speeds will be slower for a given amount of joystick deflection than at wide zoom settings This keeps the image from moving too fast on the monitor when there is a large amount of zoom There are two proportional pan modes ON default Enables the proportional pan mode OFF Disables proportional pan mode The pan speed will not depend on the amount of zoom 39 PARK TIME This feature allows the dome to begin a specified operation scan preset or pattern after a lt SYSTEM INFORMATION gt DISPLAY SETUP programmed time of inactivity lt DOME SETTINGS Park time can be programmed from 1 minute to 720 minutes 12 hours or set to zero which RESET CAMERA disables this feature The default setting is zero CYCLE CAMERA POWER REBOOT SYSTEM Eur Park Action This feature will define the activity when the dome parks The following settings are available NONE default No action AUTO SCAN Dome starts auto scan operation sma RANDOM SCAN
66. ipment All goods requiring warranty repair shall be sent freight pre paid to Pelco Clovis California Repairs made necessary by reason of misuse alteration normal wear or accident are not covered under this warranty Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from the specific use or application made of the Products Pelco s liability for any claim whether based on breach of contract negligence infringement of any rights of any party or product liability relating to the Products shall not exceed the price paid by the Dealer to Pelco for such Products In no event will Pelco be liable for any special incidental or conse quential damages including loss of use loss of profit and claims of third parties however caused whether by the negligence of Pelco or otherwise The above warranty provides the Dealer with specific legal rights The Dealer may also have additional rights which are subject to variation from state to state REVISION HISTORY Manual Date Comments C3434M 8 07 Original version 9 07 Corrected tilt angle specifications Pelco the Pelco logo Camclosure Coaxitron Endura Esprit ExSite Genex Legacy and Spectra are registered trademarks of Pelco PelcoNet and Spectra Ill are trademarks of Pelco DLP is a registered trademark of Texas Instruments Inc Vicon is a registered trademark of Vicon Industries Inc If a warranty repair is req
67. is Open to enter selection RESET DELAY SECS lt ALARM SETTINGS gt 7 To edit the alarm schedule EN The Edit Schedule menu is a duplicate of the Edit Event menu in the Event section with the following exceptions In the Edit Schedule menu the event type cannot be changed Also the Holiday feature cannot be accessed from the Edit Schedule menu For instructions on changing the features in the Edit Schedule menu refer to the Edit Event section on page 69 ALARM SETTINGS ALARM NUMBER ALARM PRIORITY ALARM ACTION ACTIVATE AUX ALARM CONTACT EDIT SCHEDULE BACK EXIT 9 07 59 AUX PELCO SPECTRA IV SE HORIZON LANGUAGE lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt lt DOME SETTINGS gt RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT DOME SETTINGS lt CAMERA gt lt MOTION gt lt POWER UP gt lt LINE SYNC gt lt PRESETS gt lt PATTERNS gt lt ZONES gt lt WINDOW BLANKING gt lt ALARMS gt lt AUX gt lt TITLE TEXT gt lt CLEAR gt lt PASSWORD gt lt CLOCK gt lt EVENT gt BACK EXIT AUX 1 MODE TOGGLE DWELL TIME SECS 1 AUX 2 MODE TOGGLE DWELL TIME SECS 1 lt EDIT SCHEDULE gt BACK EXIT 60 An auxiliary output is a programmable signal from the dome back box that can trigger another device to operate An auxiliary output is programmable to trigger from an alarm or from a controller An AUX 1 command from the controller will activat
68. ke it visible and the areas on both sides of it not visible ENABLE WINDOW The areas above and below the blanking area remain visible Reversing the window a second time will return it to its original condition BACK bad CLEAR WINDOW All areas that have been set for window blanking are cleared 9 07 55 56 BLANK ALL ABOVE BLANK ALL BELOW The Blank All Above and Blank All Below options add additional flexibility to setting up privacy areas These settings are ideal for applications where a complete pan location needs to be blanked Blank All Above blanks everything above a user defined tilt angle A blanked band will appear at the top of the screen Blank All Below blanks everything below a user defined tilt angle A blanked circle will appear below the specified angle Refer to Table C on page 56 and Figure 3 on page 56 for available settings The default setting for both Blank All Above and Blank All Below is OFF Table C Window Blank Settings Blank All Above Blank All Below Tilt Angle Blanked Area Tilt Angle Blanked Area 10 10 above horizon to 18 above horizon 10 10 above horizon to 92 below horizon OFF No blanking OFF No blanking 0 Horizon to 18 above horizon 0 Horizon to 92 below horizon 10 18 above horizon to 10 below horizon 10 10 to 92 below horizon 20 18 above horizon to 20 below horizon
69. l section on page 34 and Auto IR Level LINE SYNC A PRESETS gt section on page 32 lt PATTERNS gt lt ZONES gt lt WINDOW BLANKING gt lt ALARMS gt lt AUX gt lt TITLE TEXT gt lt CLEAR gt lt PASSWORD gt lt CLOCK gt lt EVENT gt BACK EXIT CAMERA TYPE OF LIGHTING AUTO FOCUS ZOOM LIMIT ZOOM SPEED LOW LIGHT LIMIT IR CUT FILTER AUTO IR LEVEL lt ADVANCED SETTINGS gt BACK EXIT ADVANCED SETTINGS SHUTTER SPEED AGC LIMIT AUTO IRIS AUTO IRIS LEVEL AUTO IRIS PEAK AUTO SHARPNESS SHARPNESS LEVEL AUTO WHITE BALANCE R GAIN B GAIN BACKLIGHT COMP VIDEO LEVEL WIDE DYNAMIC RANGE PROGRESSIVE SCAN E IMAGE STABILIZER BACK EXIT 36 9 07 PELCO SPECTRA IV SE HORIZON LANGUAGE lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt lt DOME SETTINGS gt RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT DOME SETTINGS lt CAMERA gt lt MOTION gt lt POWER UP gt lt LINE SYNC gt lt PRESETS gt lt PATTERNS gt lt ZONES gt lt WINDOW BLANKING gt lt ALARMS gt lt AUX gt lt TITLE TEXT gt lt CLEAR gt lt PASSWORD gt lt CLOCK gt lt EVENT gt BACK EXIT CAMERA TYPE OF LIGHTING AUTO FOCUS ZOOM LIMIT ZOOM SPEED LOW LIGHT LIMIT IR CUT FILTER AUTO IR LEVEL lt ADVANCED SETTINGS gt BACK EXIT ADVANCED SETTINGS SHUTTER SPEED AGC LIMIT AUTO IRIS AUTO IRIS LEVEL AUTO IRIS PEAK AUTO SHARPNESS SHARPNESS LE
70. me drive The following information is required to set the dome drive address P type control Default address is 2 Refer to Table A on page 10 for address settings that use P type control Maximum number of receivers is 32 D type control Default address is 1 Refer to Table B on page 11 for address settings that use D type control Maximum number of receivers is 254 9 07 7 SW2 SWITCHES 1 3 SPECIAL SYSTEM SETTINGS AD 32 Preset System SW2 1 should be set to the ON position if an AD 32 controller and Pelco s TXB AD translator board are used to control the dome system CM9502 Setting If a CM9502 matrix system is used with the dome drive set SW2 2 to the ON position Vicon System The Vicon protocol is not currently available SW2 3 is reserved for future use SW2 SWITCHES 4 5 SERIAL PORT SETTINGS RS422 Setting Default SW2 4 and SW2 5 should both be set to the OFF position for RS422 setting For control only two wires should be connected to the RX and RX connectors on the circuit board inside the back box For bidirectional control four wires should be connected to the RX RX TX and TX connectors on the circuit board inside the back box RS485 4 Wire Setting SW2 4 should be set to OFF and SW2 5 should be set to ON if a four wire serial port connection is used with RS485 NOTE This setting is most commonly used with Pelco Endura systems RS485 2 Wire Setting SW2 4 and SW2 5 should both b
71. n operation stops when a limit stop is reached REBOOT SYSTEM SCAN The dome reverses direction during random frame or auto scanning when a limit EXIT stop is reached To set manual or scan stops 1 Use the joystick to position the cursor beside SET MANUAL STOPS or SET SCAN STOPS CAMERA lt MOTION gt 2 Press Iris Open lt POWER UP gt LINE SYNC Follow the directions displayed on the monitor lt PATTERNS gt f lt ZONES gt NOTE order for the manual or scan stops to work the LIMIT STOPS option must be ON lt WINDOW BLANKING gt lt ALARMS gt lt AUX gt To clear manual or scan stops lt TITLE TEXT gt pore 1 Use the joystick to position the cursor beside CLEAR MANUAL STOPS or CLEAR SCAN lt CLOCK gt STOPS lt EVENT gt BACK 2 Press Iris Open EXIT mE f f 3 Follow the directions displayed on the monitor MOTION AUTO FLIP PROPORTIONAL PAN PARK TIME MINUTES PARK ACTION SCAN SPEED DEG S PRESET FREEZE FRAME LIMIT STOPS lt SET MANUAL STOPS gt lt CLEAR MANUAL STOPS gt lt SET SCAN STOPS gt lt CLEAR SCAN STOPS gt lt SET AZIMUTH ZERO gt lt CLEAR AZIMUTH ZERO gt BACK EXIT REFERENCE INFORMATION MANUAL LIMITS SET SCAN LIMITS SET 42 9 07 PELCO SPECTRA IV SE HORIZON AZIMUTH ZERO LANGUAGE Azimuth is the pan angle from zero to 359 degrees Azimuth zero is the pan position you specify to lt SYSTEM INFORMATION gt
72. nside you will find information about features and commands as well as a detailed menu tree and a quick start guide Refer to Installation on page 7 for information required to set up and install the dome drive Please thoroughly familiarize yourself with the information in this manual before installing and using your system 9 07 Installation NOTES Please refer to the Important Note shipped with the dome drive before installing the back box dome drive or lower dome The Important Note contains vital information about managing the bubble seam This manual contains installation instructions only for the Spectra IV SE Horizon dome drive For complete installation instructions for a Spectra IV SE Horizon dome system refer to the installation manual shipped with the back box SWITCH SETTINGS Before installing the dome drive configure the receiver address termination and baud setting The DIP switches used to configure these settings are located on the base of the dome drive Figure 1 shows the default settings for the DIP switches Switch SW1 1 SW1 switch 1 is set to the ON position All other switches are set to the OFF position Refer to the following sections to set the address termination and baud settings for the dome drive Figure 1 Default Switch Settings SW1 RECEIVER ADDRESS Set the SW switches for the address of the do
73. o enter selection lt MOTION DETECTION gt lt EDIT SCHEDULE gt lt CLEAR PRESET gt lt CLEAR CAMERA SETTINGS gt BACK EXIT REFERENCE INFORMATION AZIMUTH ELEVATION ZOOM RATIO CUSTOM CAMERA SETTINGS 48 9 07 PELCO SPECTRA IV SE HORIZON LANGUAGE lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt lt DOME SETTINGS gt RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT DOME SETTINGS lt CAMERA gt lt MOTION gt lt POWER UP gt lt LINE SYNC gt lt PRESETS gt lt PATTERNS gt lt ZONES gt lt WINDOW BLANKING gt lt ALARMS gt lt AUX gt lt TITLE TEXT gt lt CLEAR gt lt PASSWORD gt lt CLOCK gt lt EVENT gt BACK EXIT PRESETS lt EDIT MOTI EDIT SCHEDULE CLEAR PRESET gt CLEAR CAMERA SETTINGS BACK EXIT REFERENCE INFORMATION AZIMUTH ELEVATION Z00M RATIO CUSTOM CAMERA SETTINGS MOTION DETECTION MOTION DETECTION ENABLED EDIT DETECTION AREAS ACTIVATE AUX AUX TIME SECS BACK EXIT 9 07 ENABLE MOTION DETECTION The following are the settings for motion detection OFF default Motion detection is turned off disabled ON Motion detection is turned on enabled NOTE Motion detection does not work if the shutter speed is set at less than 1 60 of a second EDIT DETECTION AREAS Four motion detection areas can be defined for a preset Use the following steps to edit motion detection are
74. press lt DISPLAY SETUP gt Iris Open lt DOME SETTINGS gt b Zoom in to the point where you want window blanking to turn on Press Iris Open to RESET CAMERA set the zoom point CYCLE CAMERA POWER REBOOT SYSTEM de NOTES Since the area is already blanked out it may be difficult to determine when you want window blanking to turn on Reverse the window before setting the zoom point When finished reverse the window again to blank out the area CAMERA Mornion Increase the size of the window if any part of the blanked area is revealed during tilt lt POWER UP gt SYNC and zoom operations lt PRESETS gt lt PATTERNS gt lt ZONES gt lt WINDOW BLANKING gt lt ALARMS gt lt AUX gt lt TITLE TEXT gt lt CLEAR gt lt PASSWORD gt lt CLOCK gt lt EVENT gt BACK EXIT WINDOW BLANKING STYLE Window Blanking Disabled Window Blanking Enabled BLANK ALL ABOVE BLANK ALL BELOW EDIT SCHEDULE lt SET WINDOWS gt The Edit Schedule menu is a duplicate of the Edit Event menu in the Event section with the following exceptions In the Edit Schedule menu the event type cannot be changed Also the Holiday feature cannot be accessed from the Edit Schedule menu BACK EXIT For instructions on changing the features in the Edit Schedule menu refer to the Edit Event section on page 69 WINDOW NUMBER EDIT WINDOW LOCATION REVERSE A blanked out area can be reversed ma
75. r to the Camera and Advanced Camera Settings sections of this manual to change RESET CAMERA preset camera settings CYCLE CAMERA POWER REBOOT SYSTEM eit c To edit the camera settings schedule use the joystick to position the cursor beside EDIT SCHEDULE Press Iris Open The Edit Schedule menu is a duplicate of the Edit Event menu in the Event section with the following exceptions In the Edit Schedule menu the event type cannot be changed Also the Holiday feature cannot be accessed from the Edit Schedule menu lt CAMERA gt For instructions on changing the features in the Edit Schedule menu refer to the Edit LINE SYNC Event section on page 69 lt PRESETS gt lt PATTERNS gt lt ZONES gt NOTES a There two additional options available for the IR cut filter that are only available when lt AUX gt programming a preset The additional settings are YES and NO If the IR cut filter is set to lt TITLE TEXT gt S mre lt CLEAR gt YES the preset scene will be in color If the IR cut filter is set to NO the preset scene will be SPASSW RDS in black white lt CLOCK gt SEVENTS You copy camera settings from one preset to another preset copy camera settings BACK do the following a 1 Use the joystick to position the cursor beside COPY CAMERA SETTINGS 2 Press Iris Open The cursor moves to the right 3 Move the joystick up or down to view selections Press Iris Open t
76. roceed to the Edit Holiday section on page 71 NOTE Holidays cannot be changed through the Edit Schedule option from the Preset Pattern Window Blanking Alarm or Aux menus 9 07 PELCO SPECTRA IV SE HORIZON LANGUAGE lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt lt DOME SETTINGS gt RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT DOME SETTINGS lt CAMERA gt lt MOTION gt lt POWER UP gt lt LINE SYNC gt lt PRESETS gt lt PATTERNS gt lt ZONES gt lt WINDOW BLANKING gt lt ALARMS gt lt AUX gt lt TITLE TEXT gt lt CLEAR gt lt PASSWORD gt lt CLOCK gt lt EVENT gt BACK EXIT EVENT EVENT TYPE EVENT LABEL lt EDIT EVENT LABEL gt lt EDIT EVENT gt lt CLEAR EVENT gt lt LIST EVENT gt HOLIDAY lt EDIT HOLIDAY gt lt CLEAR HOLIDAY gt lt LIST HOLIDAYS gt BACK EXIT REFERENCE INFORMATION 12 00 AM NONE 9 07 EDIT HOLIDAY Use the following steps to edit a holiday 1 Use the joystick to position the cursor beside EDIT EVENT LABEL 2 Press Iris Open 3 Use the joystick to position the cursor beside OCCURRENCE Press Iris Open The following are the settings for Occurrence FIXED DATE RELATIVE DATE Holiday occurs on the same date each year Holiday occurs on a different date each year such as the third Sunday in April 4 If FIXED DATE was selected as the occurrence the following appears on the monitor
77. roller does not have a joystick use the up or down key Press Iris Open the submenu cursor moves to the right ACCESSING MAIN MENU PRESET 95 You can call up the main menu on your monitor by programming setting or creating preset 95 preset 28 if in AD32 preset mode Programming preset 95 for Pelco s controllers varies according to the type of controller you are using Instructions for programming preset 95 are given below for various Pelco controllers CM6700 CM6800 1 Enter the number of the Spectra IV SE Horizon dome system and press the CAM key 2 Enter 95 and hold the PRESET key for two seconds 3 Inthe Edit Preset menu arrow to SET and press the ACK key The main menu appears KBD200A KBD300A Direct Mode Only 1 Enter 95 2 Hold the PRESET key approximately five seconds until the main menu appears on the screen 9 07 21 CM9500 1 Enter the number of the Spectra IV SE Horizon dome system and press the CAM key The main menu appears 2 Highlight SETUP in the main menu and press the SELECT key 3 Highlight CAM in the Setup menu and press the SELECT key 4 Highlight PRESET in the Camera menu and press the SELECT key 5 Enter 95 and press the F1 key The main menu appears CM9740 CM9760 CM9770 CM9780 1 Press the ESCAPE key to open the main menu Select DEF The Define submenu appears 2 Enter your four digit PIN f this is your first time entering this mode 3 Enter 95 and select PRS
78. rsor to OK Press Iris Open to return to the Edit Schedule menu After an event has been labeled the label will be displayed when the event is activated according to the display setup values for this label Refer to the Display Setup section on page 28 for instructions on how to change the way a label is displayed on the monitor 9 07 PELCO SPECTRA IV SE HORIZON LANGUAGE lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt lt DOME SETTINGS gt RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT DOME SETTINGS lt CAMERA gt lt MOTION gt lt POWER UP gt lt LINE SYNC gt lt PRESETS gt lt PATTERNS gt lt ZONES gt lt WINDOW BLANKING gt lt ALARMS gt lt AUX gt lt TITLE TEXT gt lt CLEAR gt lt PASSWORD gt lt CLOCK gt lt EVENT gt BACK EXIT EVENT EVENT TYPE EVENT LABEL lt EDIT EVENT LABEL gt lt EDIT EVENT gt lt CLEAR EVENT gt lt LIST EVENT gt HOLIDAY lt EDIT HOLIDAY gt lt CLEAR HOLIDAY gt lt LIST HOLIDAYS gt BACK EXIT REFERENCE INFORMATION 12 00 AM NONE 9 07 EDIT EVENT Use the following steps to edit an event 1 Use the joystick to position the cursor beside EDIT EVENT 2 Press Iris Open The following appears on the monitor EDIT EVENT EVENT LABEL EVENT ACTIVE ON EVENT TIME 12 00 AM EVENT OCCURS SUNDAY OFF MONDAY OFF TUESDAY OFF WEDNESDAY OFF THURSDAY OFF FRIDAY OFF SATURDAY OFF HOLIDAY SKIP
79. scan operation when alarm is triggered EU FRAME SCAN Dome starts frame scan operation when alarm is triggered peg d Press Iris Open to enter selection 58 9 07 5 Set the auxiliary to activate PELCO SPECTRA IV SE HORIZON LANGUAGE a Use the joystick to position the cursor beside ACTIVATE AUX lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt b Press Iris Open The cursor moves to the right lt DOME SETTINGS gt Move the joystick up or down to view the following available selections CYCLE CAMERA POWER REBOOT SYSTEM NO default Not activated 1 alarm action will close AUX 1 2 An alarm action will close AUX 2 CAMERA d Press Iris Open to enter selection lt MOTION gt lt POWER UP gt NOTE The AUX 1 AUX2 will stop when all the alarms assigned to it have cleared If the lt LINE SYNC gt Eoy j lt PRESETS gt AUX1 AUX is set up as momentary then it will be activated each time a new alarm is lt PATTERNS gt 7 Seances activated lt WINDOW BLANKING gt lt ALARMS gt 6 Set the alarm contact lt AUX gt Use the joystick to position the cursor beside ALARM CONTACT lt PASSWORD gt lt CLOCK gt b TENIS Press Iris Open The cursor moves to the right BACK c Move the joystick up or down to view the following available selections EXIT N O default Normally open Normally closed RESUME SEQUENCE SECS d Press Ir
80. se and may cause compression rate changes in DVRs NVRs and network devices ADVANCED SETTINGS SHUTTER SPEED AGC LIMIT AUTO IRIS AUTO IRIS LEVEL AUTO IRIS PEAK AUTO SHARPNESS SHARPNESS LEVEL AUTO WHITE BALANCE R GAIN B GAIN BACKLIGHT COMP VIDEO LEVEL WIDE DYNAMIC RANGE E IMAGE STABILIZER BACK EXIT 38 9 07 MOTION SETTINGS PELCO SPECTRA IV SE HORIZON LANGUAGE lt SYSTEM INFORMATION gt lt DISPLAY SETUP gt lt DOME SETTINGS gt RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM EXIT DOME SETTINGS lt CAMERA gt lt MOTION gt lt POWER UP gt lt LINE SYNC gt lt PRESETS gt lt PATTERNS gt lt ZONES gt lt WINDOW BLANKING gt lt ALARMS gt lt AUX gt lt TITLE TEXT gt lt CLEAR gt lt PASSWORD gt lt CLOCK gt lt EVENT gt BACK EXIT MOTION AUTO FLIP PROPORTIONAL PAN PARK TIME MINUTES PARK ACTION SCAN SPEED DEG S PRESET FREEZE FRAME LIMIT STOPS lt SET MANUAL STOPS gt lt CLEAR MANUAL STOPS gt lt SET SCAN STOPS gt lt CLEAR SCAN STOPS gt lt SET AZIMUTH ZERO gt lt CLEAR AZIMUTH ZERO gt BACK EXIT REFERENCE INFORMATION MANUAL LIMITS SET SCAN LIMITS SET 9 07 AUTO FLIP When the camera tilts downward and goes just beyond the vertical position the dome rotates 180 degrees When the dome rotates flips the camera starts moving upward as long as you continue to hold the joystick in the down posit
81. t 88 filter IN and 89 filter OUT AUTO default Automatic operation is controlled by the auto IR level setting YES Images are always displayed in color mode NO Images are always displayed in black white mode lt CAMERA gt Low Light Focus lt MOTION gt NESNE If you are using an IR illuminator the low light focus feature of the camera can be tuned to lt PRESETS gt correspond to the setting of the illuminator PATTERNS ZONES ZINDQWBEANKINS There are three low light focus settings i OFF default Low light focus is not activated gt 850NM Low light focus is tuned to 850 nm nanometers a 950 Low light focus is tuned to 950 nm lt EVENT gt BACK Auto IR Level EXIT The auto IR level is the light level at which the infrared filter switches IN or OUT Following are the available settings for the auto IR level DUSK default approximately 6 lux black white TYPE OF LIGHTING approximately 13 lux color DARK approximately 0 1 lux black white ZOOM SPEED approximately 2 lux color LOW LIGHT LIMIT IR CUT FILTER AUTO IR LEVEL NOTES ADVANCED SETTINGS f backlight compensation is ON and the IR cut filter switches OUT in normal lighting BACK conditions adjust the Auto IR Level to a darker setting Refer to the Backlight Compensation EXIT BLC section on page 36 Low light does not mean no light Some type of illumination is required street light IR light et
82. tick to position the cursor beside DAYLIGHT SAVINGS Press Iris Open The following are the settings for daylight savings DAYLIGHT SAVINGS BACK OFF Daylight saving time will be turned off FIXED DATE Daylight saving time occurs on the same date each year RELATIVE DATE Daylight saving time occurs on a different date each year such as the first Sunday in April 64 C3434M A 9 07 7 9 07 If FIXED DATE was selected the following appears on the monitor a Usethe joyst desire b Usethe joys until the desi Use the joyst until the desi d Usethe joys ick to posi ired month ick to posi ick to posi ick to posi CLOCK TIME BASE INTERNAL CLOCK TIME FORMAT 12 HOUR SET TIME 00 00 AM DATE FORMAT MM DD YYYY SET DATE 00 00 0000 DAYLIGHT SAVINGS FIXED DATE TIME SHIFT 1 HOUR START DATE MONTH APRIL DAY 1 START TIME 02 00 AM END DATE MONTH OCTOBER DAY 1 END TIME 02 00 AM BACK EXIT ion the cursor beside the start date DAY Press Iris Open Scroll through the options ired date appears Press Iris Open to select the day ion the cursor beside START TIME Press Iris Open Scroll through the hours until the desired time appears Use the joystick to move the cursor to the right Scroll through the minutes until the desired time appears Press Iris Open to select the start time e Repeat steps b d for the ending date and time ion the cursor beside TIME
83. tion keys left right and up down Zoom Far To zoom far do the following 1 Press the Zoom Tele button or turn the joystick clockwise until zoom stops at the optical zoom limit 2 Release the button or joystick for one second 3 To continue zooming digitally press the button or turn the joystick clockwise again until you have the picture you want or reach the digital zoom limit Zoom Wide Press the Zoom Wide button or turn the joystick counterclockwise Scanning Stop Scan Preset 96 Random Scan Preset 97 Frame Scan Preset 98 Auto Scan Preset 99 Presets Refer to the documentation supplied with the control system Patterns Refer to the documentation supplied with the control system Zones Refer to the Zones section on page 53 and to the documentation supplied with the control system Alarms Refer to the Alarms section page 57 in this manual Auto Flip Turn on or off in the programming menu Refer to the Auto Flip section on page 39 in this manual Digital zoom magnifies the image electronically and the picture may appear pixelated The larger the digital zoom limit the greater the reduction in resolution 2 dome cannot do electronic zoom in pattern Optical zoom will operate in a pattern 20 9 07 QUICK PROGRAMMING GUIDE Access main menu preset 95 See the Accessing Main Menu Preset 95 section PRESET Use the joystick to position the cursor beside menu selection NOTE If your cont
84. to be sent by a COURIER SERVICE send the goods to Pelco 3500 Pelco Way Clovis CA 93612 5699 USA If the goods are to be sent by a FREIGHT FORWARDER send the goods to Pelco c o Expeditors 473 Eccles Avenue South San Francisco CA 94080 USA Phone 650 737 1700 Fax 650 737 0933 Copyright 2007 Pelco All rights reserved PELLO Worldwide Headquarters 3500 Pelco Way Clovis California 93612 USA USA amp Canada Tel 800 289 9100 Fax 800 289 9150 International Tel 1 559 292 1981 Fax 1 559 348 1120 www pelco com 1509001 Australia Canada Finland France Germany Italy Macau The Netherlands Russia Singapore South Africa Spain Sweden United Arab Emirates United Kingdom United States
85. uired the Dealer must contact Pelco at 800 289 9100 or 559 292 1981 to obtain a Repair Authorization number RA and provide the following information 1 Model and serial number 2 Date of shipment number Sales Order number or Pelco invoice number 3 Details of the defect or problem f there is a dispute regarding the warranty of a product which does not fa under the warranty conditions stated above please include a written explana ion with the product when returned Method of return shipment shall be the same or equal to the method by whic he item was received by Pelco RETURNS n order to expedite parts returned to the factory for repair or credit please call he factory at 800 289 9100 or 559 292 1981 to obtain an authorization number CA number if returned for credit and RA number if returned for repair All merchandise returned for credit may be subject to a 20 restocking and refurbishing charge Goods returned for repair or credit should be clearly identified with the assigned CA or RA number and freight should be prepaid Ship to the appropriate address below If you are located within the continental U S Alaska Hawaii or Puerto Rico send goods to Service Department Pelco 3500 Pelco Way Clovis CA 93612 5699 If you are located outside the continental U S Alaska Hawaii or Puerto Rico and are instructed to return goods to the USA you may do one of the following If the goods are

Pelco Spectra IV SE Horizon Series Dome Drive IV SE User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents