Home

Panasonic AJ-SPX800 Menu Information

1. Items Adjustable Remarks Items Adjustable Remarks Data Saved Range Data Saved Range mMASTER 3dB Select the master gain from 3 0 3 6 9 MASTER 3dB Select the master gain from 3 0 3 6 9 GAIN 12 15 18 21 24 27 or 30dB GAIN 12 15 18 21 24 27 or 30dB 0dB 9dB S C U F E 300B S C U F E 300B H DTL LEVEL 00 Set H DTL LEVEL H DTL LEVEL 00 Set H DTL LEVEL 17 14 S C U F E63 S C U F E 63 V DTLLEVEL 00 Set V DTL LEVEL V DTLLEVEL 00 Set V DTL LEVEL 24 20 s c u F E 31 s c u F E 31 DTLCORING 00 Set DTL CORING DTLCORING 00 Set DTL CORING 02 03 C U F E15 S C U F E 15 H DTL FREQ 00 Set a frequency DTL width at which H DTL H DTL FREQ 00 Set a frequency DTL width at which H DTL is added The greater the value the higher is added The greater the value the higher 20 the frequency the narrower the DTL 20 the frequency the narrower the DTL S C U F E 31 S C U FIE 31 LEVEL 0 Set LEVEL DEPEND LEVEL 0 Set LEVEL DEPEND DEPEND 1 No DTL is added to the portion whose DEPEND 1 No DTL is added to the portion whose brightness is the setting value or less M brightness is the setting value or less 5 When the GAMMA MODE SEL item is set to 5 When the GAMMA MODE SEL item is set to STD each setting value
2. Items Adjustable B m rks Data Saved Range ID READ ON Select whether or not to include the WRITE OFF CAMERA ID when reading out or writing to slelslEe s the SD memory card USER MENU JON Select whether or not to include the FILE SELECT RW OFF MENU settings when reading out or writing 2 5 lel to the SD memory card SYSTEM MENU ON Select whether or not to include the set RW OFF values on the SYSTEM SETTING page when reading out or writing to the SD 1F memory card PAINT MENU JON Select whether or not to include the adjusted LEVEL R W OFF values on the PAINT page when reading out or writing to the SD memory card PAINT MENU JON Select whether or not to include the set SW M R W OFF values on the PAINT MENU page when reading out or writing to the SD memory 1 1F card VF MENU ON Select whether or not to include the set R W OFF values on the VF page when reading out or Jaap writing to the SD memory card CAM OPE ON Select whether or not to include the set MENU R W OFF values on the CAM OPERATION page when reading out or writing to the SD memory _ _J_lFl_ card MAIN OPE ON Select whether or not to include the set MENU R W OFF values on the MAIN OPERATION page when reading out or writing to the SD 1 1F memory card MAINTE MENU ON Select whether or not to include the set RW OFF values on the MAINTENANCE page when reading out or writing to the SD memory 1 1F c
3. Items Adjustable Remarks Items Adjustable Remarks Data Saved Range Data Saved Range MASTER 3dB Select the master gain from 3 0 3 6 9 KNEE APE LVL OFF Set KNEE APE LEVEL GAIN 12 15 18 21 24 27 or 30dB 1 18dB 2 S C U F E 300B s c u F E H DTLLEVEL 00 Set H DTL CHROMA DTL OFF Set the chroma detail 12 1 Detects the chroma edge and superimposes E it on Y to enhance H DTL A greater value S IC U F E63 slclulFlE 5 increases the correction V DTLLEVEL 00 Set V DTL LEVEL DTL GAIN 31 Adjust the detail level toward upwards 17 00 s c U F Ef31 SIC U F E 31 DTLCORING 00 Set DTL CORING DTL GAIN 81 Adjust the detail level toward the downwards 08 00 C U F E15 S C U F E 31 H DTL FREQ 00 Set a frequency DTL width at which H DTL DTL CLIP 00 Adjust the detail signal clip towards the is added The greater the value the higher direction 20 the frequency the narrower the DTL siclulFle 63 S C U F E ki DILSOURCE R02 Set the signal source for detail signal LEVEL 0 Set LEVEL DEPEND G B 2 components DEPEND No DTL is added to the portion whose 2G R B 4 8 brightness is the setting value or less 3G R 4 5 When the GAMMA MODE SEL item is set to R STD each setting value represents slclulFlE 6 brightness levels as follows 0 about 0 I 1 about 4 2 about 8 3 about 12 H DTL LINE MIX 1H Set the scan line to generate the H DTL 4 about 16 5 about 20 2H s
4. 8 4 6 MODE CHECK IND Items Adjustable SAVE LED P2CARD SAVE Set the SAVE lamp function P2CARD The lamp blinks in synch with the warning message when the P2 card s remaining recording capacity is getting low SAVE The lamp lights up when the SAVE ON OFF switch is set to ON and the output system assigned in 8 2 2 OPTION MODE 1 is in the save mode DV DV Select whether or not to enable DV indication when the format is set to DV ON Enable DV indication OFF Disable DV indication VOICEMEMO Select whether or not to enable the indication during voice memo recording ON Enable 9 indication OFF Disable J indication Data Saved Range hemarks STATUS ON Select whether or not to display the status OFF indication during MODE CHECK C U F E ILED ON Select whether or not to display the cause OFF indication screen when the LED turns on C U F E during MODE CHECK FUNCTION ON Select whether or not to display the OFF FUNCTION indication screen during MODE C U F E CHECK AUDIO ON Select whether or not to display the AUDIO OFF indication screen during MODE CHECK C U F E PON IND ON Select whether or not to display the status OFF indication screen after the power is turned c u F E ON The in the Adjustable Range column indicates the preset mode 111 8 5
5. 12 7 15 0 END 11 0 When MANUAL is selected in the menu i 2 above set the END voltage in 0 1 V steps C U F 15 0 NiCd12 x Enable selection under BATTERY SELECT Enable selection e Disable selection NEAR END 11 0 Set the NEAR END voltage in 0 1 V steps 115 15 0 END 11 0 When MANUAL is selected in the menu i above set the END voltage in 0 1 V steps C U F 15 0 TYPE A x Enable selection under BATTERY SELECT gt Enable selection e Disable selection FULL 12 0 Set the voltage to display the FULL indication in 0 1 V steps 15 0 17 0 NEAR END 11 0 Set the NEAR END voltage in 0 1 V steps 13 6 15 0 END 11 0 When MANUAL is selected in the menu i3 7 above set the END voltage in 0 1 V steps c U F liso TYPE B x Enable selection under BATTERY SELECT x Enable selection e Disable selection FULL 12 0 Set the voltage to display the FULL indication in 0 1 V steps 13 5 17 0 NEAR END 11 0 Set the NEAR END voltage in 0 1 V steps 11 8 15 0 END 11 0 When MANUAL is selected in the menu i l above set the END voltage in 0 1 V steps C U F 15 0 8 6 4 MIC AUDIO1 Items Adjustable Remarks Data Saved Range FRONT VR CH1 FRONT Select whether or not to enable the FRONT W L AUDIO LEVEL control for the signal selected REAR as th
6. 24F Convert time code frame digits into 24 frames for display The in the Adjustable Range column indicates the preset mode 8 6 7 UMID SET INFO 8 7 FILE 8 7 1 SD CARD READ WRITE Items Adjustable Remarks Items Adjustable Remark Data Saved Range Data Saved Range COUNTRY NO INFO Input the user s country NO INFO is R SELECT 1 Select the file number to read out displayed until the input completes C U F F 8 ORGANIZATION NO INFO Input the users organisation or company READ Read out the data from the SD memory name NO INFO is displayed until the input card Iclul Fl_ completes KA fee Bia oa ES USER NO INFO Input the user name NO INFO is displayed W SELECT 1 Select the file number to write in until the input completes C U F F 8 DEVICE NODE Indicate the product ID number WRITE Write the camera recorder s menu data to the SD memory card CARD CONFIG Format the SD memory card lt Note gt Please refer to 4 5 6 Setting UMID Information for the UMID SIKA SA V L GAI PER information setting TITLE READ Read out the title of the data recorded on the SD memory card The in the Adjustable Range column indicates the preset Sore mode TITLE1 8 Up to 8 letters can be set for the title name 8 7 2 SD CARD R W SELECT
7. CAM OPERATION 8 4 7 LED 8 5 1 CAMERA ID Items Adjustable Remarks Items Adjustable R k Data Saved Range Data Saved Range emarss GAIN 0dB ON Select whether or not to illuminate when ID1 Setting 1 for the CAMERA ID recorded on OFF GAIN is set to other than 0 dB color bars Up to 10 characters are allowed Iclu FIE Iclul Fl for this setting GAIN 3dB ON Select whether or not to illuminate when ID2 Setting 2 for the CAMERA ID recorded on OFF GAIN is set to other than 3 dB color bars Up to 10 characters are allowed C U F E c u F for this setting DS GAIN ON Select whether or not to illuminate when ID3 Setting 3 for the CAMERA ID recorded on OFF DS GAIN storage gain is ON color bars Up to 10 characters are allowed c u FIE C U F for this setting SHUTTER ON Select whether or not to illuminate when the OFF shutter is set to ON lt Note gt il hcl lle This setting is canceled when READ FACTORY DATA is g WHITE ON Select whether or not to illuminate when the selected PRESET OFF WHITE BAL switch is set to PRST C U FI E EXTENDER ON Select whether or not to illuminate when the i OFF lens is in EXTENDER mode 8 5 2 SHUTTER SPEED C U FIE BLACKSTR J
8. DVCPRO DV connector is the reference If reading fails USER value is retained TCG TCG value enters UB FRM RATE Select same camera shoting information frame rate etc with the VAUX UB VITC UB REGEN Read out value stored in the card and record value continuously TIME DATE EXT VITC UB MODE USER EXT TIME DATE TCG FRM RATE REGEN Select the user bits mode for VAUX TC VITC USER EXT If UB MODE is set to EXT the EXT value is recorded If not USER value set by UB is recorded TIME Select local time hours minutes seconds DATE Select local date and time 2 last digits of year month date time TCG TCG value enters UB FRM RATE Select same camera shoting information frame rate etc with the VAUX UB VITC UB REGEN Read out value stored in card and record value continuously lt Note gt The AJ SPX800P always operates in FRM RATE for 24P and 24PA modes For more information refer to the 24P VITC UB items The menu option 24P VITC UB is found in the OPTION screen on the OPTION MENU page TCG SET HOLD OFF ON OFF switching for the feature that always starts recording when the power is turned ON again the TCG value that was set before the power is turned OFF 120 Items Data Saved Adjustable Range Remarks FIRST REC TC c u F REGEN PRESET For the first recording after the power is turned on
9. DVCPROS50 LOOP REC MODE ON OFF Select whether or not to enable LOOP REC This setting can be used with PRE RECORDING features ON Enable LOOP REC OFF Disable LOOP REC lt Note gt After the power is turned off this item will default to OFF the next time the power is turned on Items Data Saved Adjustable Range Remarks VOICE MEMO RESERV c u F ON OFF Set the available memory space for voice memos in P2 cards ON Reserve a voice memo area of 10 minutes or longer separately from the video recording capacity The voice memo area can be used even when FULL is displayed for the recording capacity of the P2 card OFF Do not reserve any voice memo space lt Note gt Even when this item is set to OFF and FULL is displayed for the P2 card s recording capacity it may be possible to record voice memos depending on the status of the P2 card REC START C U F ALL NORMAL Select operating modes that allow recording to start ALL Allow recording to start during stop recording pause and playback NORMAL Allow recording to start during stop and recording pause lt Note gt When the INTERVAL REC MODE is set to either ON or ONE SHOT the ALL setting for this option switches to NORMAL operation P ON REC SLOT SEL clu F HOLD SLOT1 Select the
10. available for this item 8 2 SYSTEM SETTING 8 2 1 SYSTEM MODE Items Data Saved Adjustable Range Remarks REC SIGNAL CAM VIDEO 1394 Select video input signals CAM Record the signal from the camera VIDEO Record the signal from the GENLOCK IN terminal 1394 Record the signal from the 1394 input terminal when optional AJ YAD800G is attached lt Notes gt After the power has been turned OFF this setting defaults to CAM when the power is turned ON again With VIDEO selected to synchronise this camera recorder to the video signal VBS that is input to the GENLOCK IN terminal the GENLOCK item in 8 2 7 GENLOCK must be set to EXT CAMERA MODE 60i 30P 24P 24PA S C U F E Switch the operating mode of the camera 60i Camera operates in 60i mode 30P Camera operates in 30P mode 24P Camera operates in 24P mode 2 3 24PA Camera operates in 24PA mode 2 3 3 2 VRES 24 30P Set the vertical resolution when the 24P 24PA 30P mode is selected INTRLCE Lines are mixed Natural images can be obtained Lines are not mixed Complete progressive images can be obtained when images are edited after shooting PROG lt Note gt When PROG is selected images are recorded as progressive segmented frame images which enables complete progressive editing However adding Vertical Detail V DTL produces unnatural images Th
11. clu F E 100 B PEDESTAL 100 Set the Bch pedestal level 000 S C U F E 100 The in the Adjustable Range column indicates the preset mode 103 8 3 2 MATRIX 8 3 3 COLOR CORRECTION Items Adjustable Remarks Items Adjustable Remarka Data Saved Range Data Saved Range M MATRIX A Select the color correction table 2 types of R 63 Perform red color correction saturation and TABLE B tables can be stored type A and type B SAT PHASE 00 hue s c U F E l g MATRIXR G 31 Adjust the tint S C U F E 63 R Mg 63 Perform color correction saturation and 06 SAT PHASE 00 hue between red and magenta S C U FE 31 i MATRIX RB 31 Adjust the tint S C U F E 63 49 Mg 63 Perform magenta color correction He SAT PHASE A saturation and hue s c u F E 431 i MATRIX G R 31 Adjust the tint S C U F E 63 06 Mg B 63 Perform color correction saturation and SAT PHASE hue between magenta and blue s UF JE 31 00 MATRIX G B 31 Adjust the tint S C U F E 63 L01 B 63 Perform blue color correction saturation and B SAT PHASE hue C U FE 31 00 MATRIX B R 31 Adjust the tint S C U F E 63 507 B Cy 63 Perform co
12. code to display TCG Display the time code generator value in E E mode TCR Display the time code reader value in V V mode TCG TCR Display the time code generator value in E E mode and the time code reader value in V V mode OFF Disable the time code display SYSTEM INFO C U F E ALWAYS NORMAL OFF Select the method of displaying system information and warnings ALWAYS Always display warnings NORMAL Display warnings for 3 seconds only when problems occur OFF Display no warnings other than TURN POWER OFF and SYSTEM ERROR Items Data Saved Adjustable Range Remarks REC STATUS ON OFF c u F Select whether or not to enable REC indication in the viewfinder and on the LCD monitor during recording ON REC indication enabled OFF REC indication not enabled lt Note gt This option is useful when the AJ SPX800P is used independently When a 26 pin extender external VTR or Triax is connected settings are subject to the setting of the menu option REC TALLY in SYSTEM MODE PROXY REC ON OFF When a video encoder card AJ YAX800G optional is attached proxy recording information is displayed when recording starts ON Display indicating whether proxy recording is to be performed on the P2 card only or on both the P2 card and the SD memory card OFF Proxy recording information is not displayed
13. if the setting is 9 frames or fewer PAUSE TIME C U F 00h00m00s01f 00h04m59s29f Jzah59m59s29f Specify PAUSE time for recording lt Note gt During 24P or 24PA modes operations are performed in 5 frame units and the fraction is truncated The minimum operation is 5 frames TAKE TOTAL TIME C U F NONE 5day Specify the time needed for shooting Select from NONE continue until operation is manually stopped to 5 days TOTAL REC TIME 00m00s01f 99m59s29f OVER100min NONE Display total recorded time The setting cannot be changed using this option Displays the recording time recording time needed for the P2 card calculated using REC TIME PAUSE TIME and TAKE TOTAL TIME lt Note gt During 24P mode or 24PA mode operations are performed in 5 frame units and the fraction is truncated The displayed value is based on actual operation using 5 frames as a unit OFF Select whether or not sound will be recorded I m O 10SEC Set the delay after pressing REC START to start recording in INTERVAL REC PRE REC TIME c u F OSEC 15SEC Set PRE RECORDING 0 15SEC Set the length of time that can be retrospectively recorded before the REC START button is pressed lt Note gt The maximum selectable range is 8 seconds when the REC MODE in the lt SYSTEM MODE gt screen is set to 50M
14. pedestal level EXT INT Synchronise with the internal 26P EXT reference signal regardless of the 000 reference signal input to the GENLOCK IN terminal ol ha a EXT Synchronise with the reference signal MASTER DTL 31 Set the H Detail and V Detail levels input to the GENLOCK IN terminal 00 26P EXT ba Synchronizes to the signal input via the S CIU F E 431 C U F E 26 pin connector MASTER 0 35 Set MASTER GAMMA in 0 01 steps H PHASE 50 Perform coarse phase adjustment for GAMMA COARSE m horizontal hold when configuring a system 0 45 aw iso S C U F E 0 75 KNEE POINT 70 0 Set the KNEE POINT position in 0 5 steps H PHASE FINE 160 Perform fine phase adjustment for horizontal A Bains p hold when configuring a system 85 0 000 lt Note gt A i160 This adjustment simultaneously shifts the S C U F E 107 0 iaia SC phase KNEE SLOPE 0 Set the KNEE slope SC PHASE 0 Perform coarse SC PHASE adjustment 50 ARSE 1 hen GENLOCK is set FOARS 5 l l s C u F Edo TT TTC R GAIN 200 Set the Rch gain SC PHASE 75 Perform fine SC PHASE adjustment when 000 FINE GENLOCK is set 00 lt Note gt S C U F E 200 475 When adjusting GENLOCK please adjust H G GAIN 200 Set the Gch gain PHASE first and then adjust SC PHASE M TU 000 S C U F E 200 B GAIN 200 Set the Bch gain 000 S C U F E 200 R PEDESTAL 100 Set the Rch pedestal level 000 S C U F E 100 G PEDESTAL 100 Set the Gch pedestal level 000 s
15. recording order of the slot when the power is turned on HOLD The recording order starts with the card previously selected when the power was turned off SLOT1 The recording order starts with the card that is inserted in Slot 1 when the power is turned on lt Note gt Displayed REC TIME PAUSE TIME and TOTAL REC TIME are translated into either drop frame or non drop frame according to the mode of operation TAKE TOTAL TIME is actual time Therefore TOTAL REC TIME may incorporate fractions depending on the settings Example of drop frame REC TIME 02s00f PAUSE TIME 02s00f TAKE TOTAL TIME 40min TOTAL REC TIME 19m59s06f The in the Adjustable Range column indicates the preset mode 101 8 2 5 OUTPUT SEL 8 2 6 LCD MONITOR Items Data Saved Adjustable Range Remarks Items Data Saved Adjustable Range Remarks VIDEO OUT SEL VBS VF X SDI C U F Select the output signal on the VIDEO OUT terminal VBS Output a regular composite signal VF Outputa VF Y signal The status display is also superimposed Y Output a component Y signal SDI Output an SDI signal Only selectable when the optional AJ YA902AG extension board is attached OUTPUT CHAR TC STATUS MENU ONLY C U F Set the character contents superimposed onto the output signals for the VIDEO OUT terminal Analog or SDI and MON OUT term
16. represents STD each setting value represents brightness levels as follows 0 about 0 brightness levels as follows 0 about 0 1 about 4 2 about 8 3 about 12 1 about 4 2 about 8 3 about 12 4 about 16 5 about 20 4 about 16 5 about 20 s C U F E 5 U s c u F E R MASTER 0 35 Set MASTER GAMMA in 0 01 steps MASTER 0 35 Set MASTER GAMMA in 0 01 steps GAMMA GAMMA 0 45 0 45 S C U F E 0 75 C U F E 0 75 BLACK 3 Set the gamma curb for dark spots BLACK 3 Set the gamma curb for dark spots STRETCH STRETCH OFF OFF S C U F E 3 S C U F E 3 mMATRIX OFF Select the color correction table mMATRIX OFF Select the color correction table TABLE A TABLE A s c u F E slclulFleE 8 mCOLOR ON Set the color correction to ON or OFF mCOLOR ON Set the color correction to ON or OFF CORRECT OFF CORRECT OFF S C U FJE S C U F E lt Note gt The ___ in the Adjustable Range column indicates the preset mode The items indicated by are the setting items for PAINT MENU SW M R W in the lt SD CARD R W SELECT gt screen The items without IM are the setting items for PAINT MENU LEVEL R W Please refer to 8 7 2 SD CARD R W SELECT for more information 105 8 3 6 HIGH SETTING 8 3 7 ADDITIONAL DTL
17. the preset mode 113 8 5 5 SW MODE 8 5 6 WHITE BALANCE MODE 114 Items Adjustable Remarka Items Adjustable Remarks Data Saved Range Data Saved Range RET SW REC Select the RET switch function FILTER INH ON Select whether or not to retain white balance CHECK REC CHECK OFF memory A B data for individual filters CAM RET Perform REC REVIEW ON Retain data in the A B memory 2 CAM RET memory areas regardless of the IcluUlFIE Perform return signal output filters OFF Retain data for individual filters SBLKWL OFF Set the super black level C U F E 10 SHOCKLESS OFF Set SHOCKLESS AWB to ON FAST 20 AWB FAST NORMAL SLOW1 3 or OFF C U F E 0 NORMAL SHOCKLESS AWB eliminates the shock SLOW1 caused by switching the WHITE BAL AUTO KNEE JON Select whether or not to use the AUTO SLOW2 switch s PRST A B setting The switching SW OFF KNEE switch Telur TE sLows time can also be selected s ls katl AWB AREA 25 Switch the AWB detecti 25 witch the etection area SHD ABB SW ON Select whether o not to enable the f 50 25 Detect 25 of area around the screen CTL OFF automatic black shading adjustment if the 90
18. year month date and hour minute cJu FIE second when recording the camera ID USER BOX 1 Set the width of the USER BOX WIDTH ZOOM LVL ON Set the zoom position indication to ON or 13 OFF OFF c U F 100 C U F E USER BOX 1 Set the height of the USER BOX COLOR TEMP ON Set the color temperature indication to ON HEIGHT 3 OFF or OFF 8 c u F E C U F E J121 CAMERA ON Set the camera operation mode indication to USER BOXH 50 Set the horizontal position of the USER MODE OFF ON or OFF POS BOX C U F E 00 C U F E450 The in the Adjustable Range column indicates the preset USER BOXV 121 Set the vertical position of the USER BOX mode POS 000 C U F E 121 110 8 4 5 VF INDICATOR2 Items Data Saved Adjustable Range Remarks P2CARD REMAIN TOTAL ONE CARD OFF Select the indication mode for the P2 card s remaining capacity TOTAL Display the total remaining capacity of all P2 cards in slots ONE CARD Display the remaining capacity of the P2 card currently used for recording OFF Disable the remaining capacity indication Set the battery voltage indication to ON or OFF Set the audio lever meter indication to ON or OFF C U F E TCG TCR TCG TCR OFF Select the time
19. DV mode clulFlE selectable by the shutter switch ATW ON Select whether or not to illuminate when POSITION5 ON Allocate the shutter speed set by OFF auto tracking white balance is allocated to OFF POSITION5 SELECT in the lt SHUTTER IclulFlE the WHITE BAL switch B SELECT gt screen as the shutter speed selectable by the shutter switch D ZOOM ON Select whether or not to illuminate during C U F E y OFF digital zoom operation POSITION6 ON Allocate the shutter speed set by C U F E OFF POSITION6 SELECT in the lt SHUTTER SELECT gt screen as the shutter speed IcJulFle selectable by the shutter switch lt Note gt If both GAIN 0 dB and GAIN 3 dB are set to ON the LED 4 i illuminates except when GAIN is adjusted to 0 dB and 3 dB inthe Adjustable Range column indicates the preset 112 8 5 3 SHUTTER SELECT 8 5 4 USER SW Items Adjustable Remarks Items Adjustable Remark Data Saved Range Data Saved Range tdi SUPER V FRM1 Select the SUPER V switching mode USER MAIN SW INH Allocate the USER MAIN button MODE FRM2 FRM1 Normal mode S GAIN FRM2 After image reduction mode DS GAIN lt Note gt S IRIS The SUPER V mode increases vertical LOVR resolution by directly outputting the photo S BLK diode vertical s
20. Enable selection under BATTERY SELECT gt Enable selection e Disable selection AUTO Select auto or manual to set the NEAR END MANUAL voltage AUTO Set voltage automatically MANUAL Set voltage manually 11 0 When MANUAL is selected in the menu above set the NEAR END voltage in 0 1 V 11 5 steps C U F 15 0 NP L50 x Enable selection under BATTERY SELECT x Enable selection e Disable selection AUTO Select auto or manual to set the NEAR END MANUAL voltage AUTO Set voltage automatically MANUAL Set voltage manually 11 0 When MANUAL is selected in the menu M above set the NEAR END voltage in 0 1 V 13 0 steps IC U F 15 0 The in the Adjustable Range column indicates the preset mode 117 8 6 3 BATTERY SETTING2 Items Adjustable Remarks Data Saved Range ENDURASO x Enable selection under BATTERY SELECT Enable selection e Disable selection AUTO Select auto or manual to set the NEAR END MANUAL voltage AUTO Set voltage automatically MANUAL Set voltage manually 11 0 When MANUAL is selected in the menu above set the NEAR END voltage in 0 1 V 13 1 steps IC U F 15 0 ENDURA80 x Enable selection under BATTERY SELECT Enable selection e Disable selection AUTO Select auto or manual to set the NEAR END MANUAL voltage AU
21. GNOSTIC2 MAIN OPE USER FILE USER MAINTENANCE USER HOURS METER The following items can be set 42 camera related items 14 x 3 pages 14 recording related items 1 page The items highlighted in grey cannot be selected by lt USER MENU SELECT gt The underlined items can only be selected as one whole page with all sub items Individual sub items cannot be selected separately About Menu Description Tables or read out from the memory S Can be saved and read as scene data file U Can be saved and read as user data F Can be read using READ FACTORY DATA Please refer to 8 7 5 INITIALIZE E Can be saved using ECU DATA SAVE The following letters indicate whether the modified menu data is saved to The indicates that the data cannot be saved or read C Can be saved or read using CARD READ WRITESD Please refer to 8 7 4 SCENE and 8 7 5 INITIALIZE Please refer to 5 9 Connecting the AJ EC3P Extension Controller Items Adjustable Remarks Data Saved Range REC SIGNAL CAM Select video input signals VIDEO CAM Record the signal from the camera 1394 VIDEO Record the signal from the GENLOCK IN terminal 1394 Record the signal from the 1394 input terminal when optional AJ clulF lE YAD800G is attached 98 This section shows the adjustable range of the set value and available options for this item About the settings
22. M level CLEAR Clear the data when the power is BETACAM turned off and save zero No Info Output using B CAM level from the next power on until a new Ic u F M2 Output using M2 level IclulFl_ measurement is completed 26PIN OFF Sets the recording control between the SDI METADATA JON Select whether or not to output metadata CONTROL BOTH external VTR and the AJ SPX800P when a OFF UMID to the SDI when the optional AJ 26 pin camera adapter AJ CA905G aa a YA902AG is attached optional is attached and used with an CU F external VTR SDI EDH ON Select whether or not to add an error OFF Recording is performed only with the OFF detection flag to the SDI output when the AJ SPX800P and not with the Iclul Fl optional AJ YA902AG is attached external VTR SAVE SW AUD ON Select whether or not to forcibly disable the PATS L in su is OUT OFF audio output when the SAVE ON OFF bere Aug an externa Switch S pel 1o ON The Tally Lamp indicates external VTR ON Disable audio output r OFF Enable audio output status Recording status of the AJ SPX800P C U F i can be selected in the menu option REC SAVE SW LCD ON Select whether or not to automatically turn C U F TALLY of SYSTEM MODE OFF off the LCD monitor when the SAVE ON 26PIN NORMAL Sets the type of VTR control signal start OFF switch is set to ON CONTROL SPECIAL stop recording which is output from No 12 ON Turn off LCD monitor _ DEFAULT of the 26 pin connector w
23. N the Adjustable Range column indicates the preset 123 8 9 OPTION MENU 8 9 1 OPTION Items Adjustable Data Saved Range ENG ON Select whether or not to prohibit opening the SECURITY OFF menu screen ON Menu screen cannot be opened Please consult your nearest service center to release the setting OFF Menu screen can be opened Remarks g PHALF SHUT JON Select whether or not to enable the 1 2 OFF shutter when the shutter is set to OFF while operating in the progressive mode ON Enable 1 2 shutter OFF Disable 1 2 shutter c ID MIX INH ON Select whether or not to inhibit mixing the ID OFF in the camera image ON Inhibit mixing ID is not mixed in the camera image OFF Do not inhibit Camera ID setting under VF INDCATOR1 is reflected in the camera image 24PVITCUB FRMRATE Select whether VITC UB is to be used for MENU other than the frame rate during operation in either 24P or 24PA mode FRM RATE Fixed to frame rate MENU Operation according to VITC UB MODE is allowed lt Note gt Regardless of the setting of this option the AJ SPX800P always operates according to the VITC UB MODE setting when not operated in 24P or 24PA modes The menu option VITC UB MODE can be found in the TC UB screen on the MAIN OPERATION C page AUDIO OUT DELAYED Select whether or not to delay audio DELAY THROUGH headphone and spe
24. ON Select whether or not to illuminate when Items Adjustable Remarks OFF BLACK STRETCH is used Data Saved Range C U F E SYNCHRO ON Allocate SYNCHRO SCAN as a shutter MATRIX ON Select whether or not to illuminate when SCAN OFF speed selectable by the shutter switch OFF MATRIX is set to ON C U F E C U FIE SUPER V ON Allocate SUPER V as a shutter speed COLOR ON Select whether or not to illuminate when OFF selectable by Ihe shutter switch CORRECTION OFF COLOR CORRECTION is set to ON C U F E C U FI E POSITION1 ON Allocate the shutter speed set by FILTER ON Select whether or not to illuminate the lamp OFF E ne i ork wneer NNeri S200K IS Not 3200K IcJulFle selectable by the shutter switch C U FI E POSITION2 ON Allocate the shutter speed set by ial ae SUR do plsk OFF POSITION2 SELECT in the lt SHUTTER as i SELECT gt screen as the shutter speed C U F E IClUl FIE selectable by the shutter switch M 25M DV i i i Kuga Wo AR dnc iluminateaccording POSITIONS ON Allocate the shutter speed set by W O 25M OFF Does not illuminate in any recording OFF POSITIONS SELECT in the lt SHUTTER W O DV mode SELECT gt screen as the shutter speed W O 50M IclUl FIE selectable by the shutter switch lluminats except IN DVCE ROSO Mode POSITIONS TON Allocate the shutter speed set by W O 25M f OFF POSITION4 SELECT in the lt SHUTTER wis ey except in DVCPRO mode SELECT gt screen as the shutter speed C U F E illuminate except in
25. Panasonic Broadcast AJ SPX800 Menu Information Chapter 8 Menu Description Tables 8 1 Menu Configuration MENU USER MENU SYSTEM SETTING MAIN MENU 7 OPTION MENU OPTION Opening the Menus USER MENU Displayed when the MENU button is pressed MAIN MENU Displayed when the MENU button is pressed for at least 3 seconds OPTION MENU Displayed when the MENU button is pressed while pressing the LIGHT button lt Notes gt SYSTEM MODE OPTION MODE 1 PAINT ROP OPTION MODE 2 MATRIX REC FUNCTION IL COLOR CORRECTION OUTPUT SEL LOW SETTING LCD MONITOR MID SETTING GENLOCK HIGH SETTING ADDITIONAL DTL t SKIN TONE DTL L KNEE LEVEL L GAMMA FLARE L CAMERA SETTING VF VF DISPLAY VE MARKER CAM OPERATION CAMERA ID USER BOX SHUTTER SPEED VF INDICATOR1 SHUTTER SELECT VF INDICATOR2 r USER SW MODE CHECK IND SW MODE LED I WHITE BALANCE MODE USER SW GAIN L IRIS MAIN OPERATION BATTERY P2CARD BATTERY SETTING1 FILE SD CARD READ WRITE BATTERY SETTING2 SD CARD RW SELECT MIC AUDIO 1 LENS FILE MIC AUDIO 2 SCENE TC UB INITIALIZE L UMID SET INFO MAINTENANCE SYSTEM CHECK LENS ADJ L USER MENU SELECT SYSTEM SETTING USER BLACK SHADING m PAINT USER WHITE SHADING VF USER IL DIAGNOSTIC1 CAM OPE USER IL DIA
26. TO Set voltage automatically MANUAL Set voltage manually 11 0 When MANUAL is selected in the menu above set the NEAR END voltage in 0 1 V 13 5 steps IC U F 15 0 BP L60 90 Pk Enable selection under BATTERY SELECT gt Enable selection e Disable selection AUTO Select auto or manual to set the NEAR END MANUAL voltage AUTO Set voltage automatically MANUAL Set voltage manually 11 0 When MANUAL is selected in the menu 5 above set the NEAR END voltage in 0 1 V 11 2 steps C U F 15 0 lt Note gt The remaining battery capacity for digital batteries is displayed PRO14 TRIM14 HYTRONS50 as inside the viewfinder HYTRON100 HYTRON120 DIONIC90 DIONIC160 NP L50 ENDURA50 ENDURA80 The BATT NEAR END alarm however is triggered according to the setting on the lt BATTERY SETTING1 gt screen regardless of the indication The in the Adjustable Range column indicates the preset mode 118 Items Adjustable Remarks Data Saved Range NiCd14 x Enable selection under BATTERY SELECT Enable selection e Disable selection NEAR END 11 0 Set the NEAR END voltage in 0 1 V steps 13 6 15 0 END 11 0 When MANUAL is selected in the menu 5 2 above set the END voltage in 0 1 V steps c U F liso NiCd13 x Enable selection under BATTERY SELECT Enable selection e Disable selection NEAR END 11 0 Set the NEAR END voltage in 0 1 V steps
27. UPER GAIN AVE M auto iris Enable 040 A larger value sets the auto iris to respond to e Disable i the peak in the IRIS detection window while C U FJE 100 a smaller value sets it to respond to the 42 dB PK Select whether or not to enable 42dB for average value in the window SUPER GAIN C U FJE Enable A IRIS MODE NORM1 Select the auto iris detection window C U F E e Disable NORM2 NORM1 The window closer to the center of the screen 48 dB Pk Select whether or not to enable 48dB for CENTR NORM2 The window closer to bottom of the SUPER GAIN screen sj CENTR The spot window in the center of the sem a Select wh i ble 6 dB T 1 30 ZEATE M Pk elect whether or not to enable 6 1 30 6dB 1 I for DS GAIN S IRIS LEVEL 000 Set the target value for the super iris 1 30 Enable 080 e Disable alka abl C U F E 100 120p x Select whether or not to enable 12 dB HAS lt RISGAIN ICAM Select which unit controls IRIS GAIN 1 15 for DS GAIN s LENS lt Note gt Enable Disable Lenses with an extender such as x2 x0 8 C U FI E M sold before FUJINON DIGI POWER 20 dB Eg Select whether or not to enable 20 dB f 1 6 perform IRIS compensation while enabling 1 6 for DS GAIN the extender Therefore if this setting is Enable switched to CAM the camera s iris control e Di ill not operate properly IclulFle Disable IclulFle wi p properly IRIS GAIN 01 Set the adjustable value
28. a P2 card is inserted and then switching from this P2 card to another recording target P2 card is performed select whether or not to regenerate the time code as the value on the new P2 card REGEN For clips recorded on the recording target P2 card regenerate the time code as the time code of the clip that has the most recent date and time PRESET Use the camera recorder s internal time code lt Notes gt Set the date and time accurately For guidance on setting see 4 5 2 Setting the Internal Clock s Date and Time During operation in either 24P or 24PA mode regeneration of the value of the card recorded in drop frame is not permitted P OFF LCD DISPLAY ON OFF Select whether or not to display the time code setting and counter indication on the LCD monitor when the power is turned OFF ON Display setting and indication while the power is turned OFF OFF Power down LCD monitor while camera power is turned OFF Setting and indication disabled TC OUT c u F TCG TCG TCR Select the time code to be output to the time code output connector TCG Always output time code generator value TCG TCR Display time code generator value in E E mode and time code reader value in V V mode TC DISP SEL C U F 30F 24F Select the display format for the time code frame digits 30F Display time code frame digits in 30 frames
29. acity detection type mode SELECT PRO14 when a battery is connected to the DC IN TRIM14 connector Remaining capacity detection is HYTRN50 also performed according to the selected HYTRN100 battery type HYTRN120 The selectable battery types change DIONIC9g depending on the settings under 8 6 2 DIONIC160 BATTERY SETTING1 and 8 6 3 BATTERY HP 90L SETTING2 BP H120 _ lt Note gt NP L50 The display is disabled even when a gt digital battery is connected to the DC IN ENDURASO connector ENDURA80 BP L60 90 NiCd14 NiCd13 NiCd12 TYPE A lclu e TYPEB BATT NEAR ON Select whether or not to set the alarm to END ALARM OFF beep for BATT NEAR END ALARM C U F BATT NEAR JON If set to ON the warning tone and indication END CANCEL OFF can be canceled by pressing the MODE CHECK button when BATT NEAR END Ic u F JALARM is triggered BATT END ON Select whether or not to set the alarm to ALARM OFF beep for BATT END ALARM C U F BATT REMAIN 100 Set the display content of the remaining FULL 70 battery capacity indicator bars in the display window when using a digital battery 100 Indicate FULL at 100 capacity lt IclUlF 70 Indicate FULL at 70 capacity 116 8 6 2 BATTERY SETTING1 Items Adjustabl
30. aker outputs DELAYED Delay audio output in synchronisation with video output THROUGH Output audio input without delay This setting prevents echo effect between the sound source and audio output when the sound source is near the camera C recorder lt Note gt Menu options for setting 1394 are displayed when an IEEE1394 interface board AJ YAD800G optional is attached For more information see the AJ YAD800G instruction manual The in the Adjustable Range column indicates the preset mode 124
31. ard 121 8 7 3 LENS FILE 8 8 MAINTENANCE 8 8 1 SYSTEM CHECK Items Adjustable Remarks Items Adjustable Remarks Data Saved Range Data Saved Range FILE NO 1 Select the lens file number COLOR CHECK ON ON OFF switching for checking proper OFF operation of the camera recorder 11 11 18 Displays the center Y and RGB levels on the z viewfinder to indicate whether the signals READ Read the lens file data have been properly processed and transmitted from the optical system to the PEB Pa ap be digital system WRITE Write the lens file data TITLE1 8 Up to 12 letters can be set for the title name 8 8 2 LENS ADJ ie ee oe el Items Adjustable Remarks Data Saved Range F2 8 ADJ ON The iris is only set to F2 8 when this item set 8 7 4 SCENE OFF to oN emer Adiuetabl F16 ADJ ON The iris is only set to F16 when this item set ems justable OFF to ON Data Saved Range Remarks 19T T READ USER Read out the data from the user area in the DATA memory SCENESEL 1 Select the scene file 8 8 3 BLACK SHADING Items Adjustable Remarks READ Read the scene file Data Saved Range CORRECT ON ON OFF switchin
32. center A EER has been pressed for 5 seconds 50 Detect 50 of area around the screen clulFlE e center COLOR BARS SMPTE Select the color bars to use lclulFIE 90 Detect 90 of area in the full screen FULI SMPTE Use tha SMF TE Color Bars AWB 8 ABB JON Select whether or not to reset the GAIN and BARS FULL BARS Use full color bars FFSET FF PED val in the ROP hen AWB SPLIT SPLIT Use SPLIT color bars OFFS OFF d ABBGI S ted menu wisn ARIB ARIB Use ARIB multi format color Sl ti ce Dea bars ON Do not reset C U FI E TelulFle OFF Reset values S GAIN OFF UMH Select Where SUPER GAIN modes COLOR TEMP 3200K Set the AWB PRE color temperature S GAIN disabled PRE L M H Disabled when the gain selector 5600K switch is operated C U F E S GAIN Disabled only with the S GAIN switch AWB A MEM Select the function to be allocated to WHITE c U F E USER button VAR BAL switch A MEM Function to store values set by DS GAIN OFF L M H Select when the DIGITAL SUPER GAIN executing the auto white balance DS GAIN mode stored gain is disabled VAR Function to apply color temperature L M H Disabled when the gain selector set by COLOR TEMP A switch is operated C U FI E DS GAIN Disabled only with the DS GAIN COLOR TEMP 3200K Set the color temperature when VAR is clUlFIE SWiteh USER Buttoni A Po selected under AWB A ECUDATA ION ON Store the values set and adjusted with C U F E SAVE OFF the ECU when the ECU is AWB B MEM Select
33. e 50M recording indication to ON or DETECT INDICATOR OFF OFF C U F E MARKER CH R 50 Adjust the brightness of markers and LVL 60 characters displayed on the VF 0 70 80 lt Note gt 90 All items in CAMERA SETTING are setting targets of the item c u F E 100 PAINT MENU SW m R W in the lt SD CARD R W SELECT gt screen The in the Adjustable Range column indicates the preset mode 109 8 4 2 VF MARKER 8 4 4 VF INDICATOR1 Items Adjustable Ramanks Items Adjustable Remarks Data Saved Range Data Saved Range TABLE A Select the VF MARKER setting table EXTENDER ON Set the extender indication to ON or OFF B First select table A or B then set the items OFF Iclu FlE below for each table Iclu FIE CENTER MARK OFF Switch the center mark SHUTTER ON Set the shutter speed indication to ON or 1 OFF Do not display center mark OFF OFF 2 1 large 3 2 Hollow large C IEEE 4 3 small FILTER ON Set the filter No indication to ON or OFF 4 Hollow small OFF SET IONE OFF Select the f type for the safet ze tl s elect the frame type for the safety zone 1 OFF Do not display frame WHITE ON Set the AWB PRE A B indication to ON or OFF OFF 2 1 Box clulFlE 2 Corner frame C U F E 4 z 7 GAIN ON Set to ON or OFF the indications for c
34. e Remarks Data Saved Range PRO14 PK Enable selection under BATTERY SELECT x Enable selection e Disable selection AUTO Select auto or manual to set the NEAR END MANUAL voltage AUTO Set voltage automatically MANUAL Set voltage manually 11 0 When MANUAL is selected in the above menu set the NEAR END voltage in 0 1 V 13 7 steps IC U F 15 0 TRIM14 x Enable selection under BATTERY SELECT Enable selection e Disable selection AUTO Select auto or manual to set the NEAR END MANUAL voltage AUTO Set voltage automatically MANUAL Set voltage manually 11 0 When MANUAL is selected in the menu above set the NEAR END voltage in 0 1 V 13 6 steps IC U F 15 0 HYTRON50 Pk Enable selection under BATTERY SELECT x Enable selection e Disable selection AUTO Select auto or manual to set the NEAR END MANUAL voltage AUTO Set voltage automatically MANUAL Set voltage manually 11 0 When MANUAL is selected in the menu above set the NEAR END voltage in 0 1 V 13 1 steps C U F 15 0 HYTRON100 x Enable selection under BATTERY SELECT x Enable selection e Disable selection AUTO Select auto or manual to set the NEAR END MANUAL voltage AUTO Set voltage automatically MANUAL Set voltage manually 11 0 When MANUAL is selected in the menu p above set the NEAR END voltage in 0 1 V 13 2 steps C U F 15 0 HYTRON120 x Enable selection under BATTERY SELECT x Enable selection e Disable s
35. e input signal to AUDIO CH1 ALL FRONT Only enabled when FRONT is OFF selected a W L Only enabled when WIRELESS is selected REAR Only enabled when REAR is selected ALL Enabled for any input selected OFF Disabled for any input selected Recording level does not change by C U F turning the volume control FRONT VR CH2 FRONT Select whether or not to enable the FRONT W L AUDIO LEVEL control for the signal selected REAR as an input signal to AUDIO CH2 ALL FRONT Only enabled when FRONT is OFF selected ae W L Only enabled when WIRELESS is selected REAR Only enabled when REAR is selected ALL Enabled for any input selected OFF Disabled for any input selected Recording level does not change by C U F turning the volume control MIC LOWCUT FRONT Select the microphone low cut filter CH1 REAR W L c u rf OFF MIC LOWCUT FRONT Select the microphone low cut filter CH2 REAR W L c U F OFF MIC LOWCUT FRONT Select the microphone low cut filter CH3 REAR W L c u F OF MIC LOWCUT FRONT Select the microphone low cut filter CH4 REAR W L c u F OF LIMITER CH1 JON Select the limiter OFF C U F LIMITER CH2 JON Select the limiter OFF C U F AUTO LEVEL JON Select the level setting method CH3 OFF C U F AUTO LEVEL JON Select the level setting method CH4 OFF C U F REC SW Select the signals to be recorded in CH3 CH3 CH4 CH1 2 and CH4 SW According to camera s CH3 and CH4
36. election AUTO Select auto or manual to set the NEAR END MANUAL voltage AUTO Set voltage automatically MANUAL Set voltage manually 11 0 When MANUAL is selected in the menu above set the NEAR END voltage in 0 1 V 13 1 steps IC U F 15 0 Items Adjustable Remarks Data Saved Range DIONIC90 PK Enable selection under BATTERY SELECT Enable selection e Disable selection AUTO Select auto or manual to set the NEAR END MANUAL voltage AUTO Set voltage automatically MANUAL Set voltage manually 11 0 When MANUAL is selected in the menu above set the NEAR END voltage in 0 1 V 13 6 steps IC U F 15 0 DIONIC160 PK Enable selection under BATTERY SELECT x Enable selection e Disable selection AUTO Select auto or manual to set the NEAR END MANUAL voltage AUTO Set voltage automatically MANUAL Set voltage manually 11 0 When MANUAL is selected in the menu above set the NEAR END voltage in 0 1 V 13 3 steps C U F 15 0 HP 90L x Enable selection under BATTERY SELECT Enable selection e Disable selection AUTO Select auto or manual to set the NEAR END MANUAL voltage AUTO Set voltage automatically MANUAL Set voltage manually 11 0 When MANUAL is selected in the menu above set the NEAR END voltage in 0 1 V 12 4 steps C U F 15 0 BP H120 x
37. erefore we recommend using the camera with V DTL set to 0 Sufficient vertical response is maintained in the images after the progressive editing even when V DTL is set to 0 Select the aspect ratio for recording 16 9 Record in lt 16 9 gt aspect ratio 4 3 Record in lt 4 3 gt aspect ratio 50M 25M DV Select the recording mode 50M Record in DVCPROSO format 25M Record in DVCPRO format DV Record in DV format 0 7 5 A Switch the setup When the DVCPRO50 or DVCPRO format is selected 0 Setup is switched to 0 for both the camera output and the recording Setup is switched to 7 5 for the camera output and 0 for the recording 7 5 A Items Data Saved Adjustable Range Remarks REC TALLY C U F E RED GREEN CHAR Selects display of the recording status of the camera when the AJ SPX800P is used with a 26 pin extender or Triax or when it is controlling an external VTR by setting the menu option 26PIN CONTROL to BOTH The menu option 26PIN CONTROL is found in the OPTION MODE 2 screen on the SYSTEM setting page RED The red tally lamp lights up GREEN The green tally lamp lights up CHAR The VF displays REC in characters ACCESS LED ON OFF Select whether or not to enable illumination of the P2 card access LEDs ON Enable the P2 card access LEDs to light up for card sta
38. especially effective in the AUTO KNEE mode FILM LIKE1 Cinema gamma feature for video This gamma is set with scene file 4 as the factory setting FILM LIKE2 Cinema gamma feature for video This gamma feature can reproduce gradations in highlighted areas better than FILM LIKE1 gamma lt Notes gt Selecting NEWS gamma disables settings under the items KNEE SLOPE KNEE POINT and A KNEE POINT outlined in 8 3 9 KNEE LEVEL These settings are also disabled when NEWS gamma is selected with the USER switch When FILELIKE1 or FILELIKE2 is selected little change occurs and a certain curve is maintained when the setting value for the KNEE SLOPE item in slclulFlE 8 3 9 KNEE LEVEL is 00 to 50 108 8 4 VF 8 3 12 BCAMERA SETTING 8 4 1 VF DISPLAY Items Adjustable Remarks Items Adjustable Remarks Data Saved Range Data Saved Range DETAIL ON Set the DTL H V to ON or OFF DISP NORMAL NORMAL Display status constantly OFF CONDITION HOLD HOLD Display status only when the SIC U F E cJu FIE MODE CHECK switch is pressed 2D LPF ON ON OFF switching for the two dimensional DISP MODE 1 Set the DISP MODE OFF LPF that reduces cross color 2 Switch the camera s Warn
39. for IRIS GAIN This VALUE setting is effective when CAM is selected for 7 IRIS GAIN C U F E 20 The in the Adjustable Range column indicates the preset mode 115 8 6 MAIN OPERATION 8 6 1 BATTERY P2CARD Items Adjustable Items Adjustable Data Saved Range Remarks Data Saved Range nomarks BATTERY PRO14 Select the battery to use Remaining CARD NEAR ON Select whether or not to set the alarm to SELECT TRIM14 capacity detection is also performed END ALARM OFF beep for P2 CARD NEAR END ALARM HYTRN50 according to the selected battery c u F The selectable battery t h is depending Gh ihe et o iki 1862 CARD NEAR 3min Set the remaining time to indicate the P2 DIONIC90 BATTERY SETTING1 and 8 6 3 BATTERY END TIME 2min CARD NEAR END TIME alarm DIONIC160 SETTING2 C U F HP 90L CARD END ON Select whether or not to set the alarm to BP H120 ALARM OFF beep for P2 CARD END ALARM NP L50 IC U F ENDURASO CARD REMAIN 5min m Set the length of time for one segment M of ENDURA80 A at aera E 3min m the P2 card s remaining capacity indicator BP L60 90 bars NiCd14 5min M One segment represents 5 minutes NiCd13 3min One segment represents 3 minutes NiCd12 C U F TYPE A c u F YFEB The in the Adjustable Range column indicates the preset EXT DC IN AC ADPT Set the remaining cap
40. g for digital black shading ais OFF compensation WRITE Write the scene file C U FI E DETECTION l Execute digital black shading compensation alkes DIG RESET Reset the scene file values to the initial values TITLE 1 3 Create the scene file title 8 8 4 WHITE SHADING TITLE 4 FILMLIKE Create the scene file title The title including Items Adjustable Remarks the data is set to FILMLIKE both as the Data Saved Range TEETH initial value and after resetting CORRECT ON ON OFF switching for white shading OFF compensation C U FI E DETECTION l Execute white shading compensation 8 7 5 INITIALIZE V SAW TT Items Adjustable Remarks M ate Data Saved Range The in the Adjustable Range column indicates the preset READ The menu USER MENU MAIN MENU mode FACTORY DATA OPTION MENU values are all reset to SIE factory settings WRITE USER Save the user preference menu data in the DATA camera s internal memory RESET LENS Reset the lens file data to the factory FILES settings 122 8 8 5 DIAGNOSTIC1 8 8 6 DIAGNOSTIC2 Items Adjustable Remarks Items Adjustable R m rks Data Saved Range Data Saved Range CAMSOFT IN Display the software version for the SYSCON SOFT Display the software version for the system microprocessor controlled flash control
41. hen the 26 pin z OFF Do not turn off LCD monitor camera adapter AJ CA905G optional is CU F attached and controls an external VTR SAVE SW SDI JON Select whether or not to automatically NORMAL OFF disable the SDI output when the SAVE ON Recording stop LOW recording start OFF switch is set to ON HIGH for AJ D92 ON Disable SDI output SPECIAL Iclul Fl_ OFF Enable SDI output Recording stop HIGH recording start C U F LOW lt Note gt ta 9S M i The in the Adjustable Range column indicates the preset Menu options for setting 1394 are displayed when an IEEE1394 mode interface board AJ YAD800G optional is attached For more information see the AJ YAD800G instruction manual 100 8 2 4 REC FUNCTION Items Data Saved Adjustable Range Remarks INTERVAL REC MODE ON ONE SHOT OFF Sets INTERVAL REC function ON Uses internal memory to perform interval recording ONE SHOT Performs one shot recording for the duration specified under REC TIME and then stops OFF INTERVAL REC is not performed lt Note gt After the power is turned off this setting defaults to OFF when the power is next turned on REC TIME c u F 00s01f 59s29f Set REC TIME 1 cut lt Note gt During 24P or 24PA modes operations are performed in 5 frame units and the fraction is truncated The minimum operation is 5 frames
42. ignal S C U F E SICIUIFIE Lat 0 85 Set MASTER GEMM In 01 steps CORNER DTL ON ON OFF switching for CORNER DTL mode 0 55 OFF which enhances the resolution around the screen perimeter S C U F E 075 tad elk BLACK 3 Set the gamma curb for dark spots m alas STRETCH The in the Adjustable Range column indicates the preset OFF mode S C U F E 3 MATRIX OFF Select the color correction table TABLE A s c u F E mCOLOR ON Set the color correction to ON or OFF CORRECT OFF S C U F E lt Note gt The items indicated by are the setting items for PAINT MENU SW M R W in the lt SD CARD R W SELECT gt screen The items without IM are the setting items for PAINT MENU LEVEL R W Please refer to 8 7 2 SD CARD R W SELECT for more information 106 8 3 8 SKIN TONE DTL 8 3 9 KNEE LEVEL Y MAX Y MIN SKIN TONE AREA Items Adjustable Remarks Items Adjustable Remarks Data Saved Range Data Saved Range MSKIN TONE JON Set the skin tone DTL to ON or OFF MASTER PED 200 Set the master pedestal 2 OFF 000 S C U F E Pa MSKIN TONE ON ON OFF switching for ZEBRA within the S C U F E 200 ZEBRA OFF SKIN TONE range mMANUAL ON Set the mode when the AUTO KNEE switch slclulFlE KNEE OFF i
43. ignal from the CCD FRM1 B STR sets the accumulation level to 1 30th DZOOM second FRM sets the level to 1 60th ATW SIEVIETE second reducing sensitivity by half Y GET NEWS G POSITION 1 100 Select the shutter speed to be allocated to AUDIO CH1 SEL 1 120 POSITION1 AUDIO CH2 1 250 REC SW 1 500 RET SW 11000 SLOT SEL clulf e 1 2000 C U F E gt POSITION2 1 100 Select the shutter speed to be allocated to SEMI S Allocate the USER button SEL 1 120 POSITION2 EEE DS GAIN 1 250 S IRIS 1 500 OVR 1 1000 S BLK IC U F E 1 2000 BSTR POSITION3 1 100 Select the shutter speed to be allocated to D ZOOM SEL 1 120 POSITIONS ATW 1 250 Y GET 1 500 NEWS G 1 1000 AUDIO CH1 clulf e l1 2000 AUDIO CH2 REC SW POSITION4 1 100 Select the shutter speed to be allocated to RET SW SEL 1 120 POSITION4 SLOT SEL 1 250 C U F E 1 500 USER2 SW INH Allocate the USER2 button 1 1000 S GAIN lclu e e 1 2000 DS GAIN POSITIONS 1 100 Select the shutter speed to be allocated to ae SEL 1 120 POSITIONS A S BLK 1 250 B STR 1 500 D ZOOM 1 1000 ATW IC U F E 1 2000 Y GET POSITION6 1 100 Select the shutter speed to be allocated to NEWS G SEL 1 120 POSITION6 AUDIO CH1 1 250 AUDIO CH2 1 500 REC SW 1 1000 RET SW lclul ee 1200 clu f e SLOT SEL lt Note gt For each function of the USER switches refer to 4 9 4 Assigning Functions to USER MAIN USER1 and USER2 Buttons The in the Adjustable Range column indicates
44. inal TC Display the time code Displays the menu when menu characters are superimposed lt Note gt The TC display position moves up and down depending on the camera ID position STATUS Display the same characters superimposed on the VF signal Displays the menu when menu characters are superimposed MENU ONLY Displays only when the menu characters are superimposed No display appears when other characters are superimposed MONITOR OUT CHAR C U F ON OFF Select whether or not to superimpose characters on the MON OUT terminal signal independently of the camera s VIDEO OUT CHARACTER switch The character content is the same as the video output signal ON Enable superimpose OFF Disable superimpose LCD MON CHAR ON OFF Select whether or not to superimpose characters on the LCD monitor The character content is the same as the video output signal ON Enable superimpose Not interlocked with the VIDEO OUT CHARACTER switch OFF Disable superimpose Not interlocked with the VIDEO OUT CHARACTER switch VF MODE c u F Select the image to display in the viewfinder EE PB Display the playback image in the playback mode EE Always display the camera image THUMBNAIL OUT Select whether or not to output clip thumbnails displayed on the LCD monitor to the video output and monitor output signals ON Enable o
45. ing Message siclulFlE 3 indication Please refer to 4 7 4 Display Modes and Setting Changes adjustment HIGH COLOR JON ON OFF switching for the HIGH COLOR Result Messages for more information OFF mode which enhances the color dynamic C U F E slclulFlE range VF OUT Y Select the VF output NAM Y Brightness signal GAMMA ON Set the gamma circuit to ON or OFF R NAM Output signal with the highest level OFF G among R G and B signals S C U F E B R Rch signal TESTSAW ON Switch the test signal ON or OFF ae ili OFF C U F E i i S C U F E VF DTL 0 Select the VF DTL FLARE ON Set the flare correction to ON or OFF Additionally enhance the DTL for the VF OFF 8 signal 0 setting is the same DTL as the slclulFlE _IclulFle 5 primary scan lines H F COMPE JON ON OFF switching for the H F COMPE ZEBRA1 0 Set the ZEBRA1 detection level IRE value OFF mode which enhances the DTL in the high DETECT f slclulFlE frequency range ae C U F E 109 ZEBRA2 0 Set the ZEBRA2 detection level IRE value DETECT ja ZEBRA Pattern Display 85 C U F E 109 l ZEBRA 2 ZEBRA2 ON Set the ZEBRA2 to ON OFF or SPOT Video Level ON OFF SPOT SPOT 109 clulf e OFF LOW LIGHT LVL OFF Set the camera incoming light volume at 10 which to display LOW LIGNT 15 20 25 30 ZEBRA 2 cl hdl 85 DETECT Z ECU MENU ON Set the menu display on the VF to ON or DISP OFF OFF when the ECU is connected C U F E ZEBRA1 Vs Li 50M ON Set th
46. lor correction saturation and ir SAT PHASE hue between blue and cyan S C U F E 31 00 MATRIX B G 31 Adjust the tint S C U F E 63 L05 Cy 63 Perform cyan color correction saturation rae SAT PHASE and hue s c U FE 31 00 M MATRIX OFF Select the color correction table to be SIC U F E 63 TABLE A applied to the selected GAIN switch L M H Cy G 63 Perform color correction saturation and s c U F EP SAT PHASE w hue between cyan and green 90 lt Note gt S C U F E 63 The items indicated by IM are the setting items for PAINT MENU T 3 on green color correction saturation SW M R W in the lt SD CARD R W SELECT gt screen The items 00 without IM are the setting items for PAINT MENU LEVEL R W S ClU FIE 163 Please refer to 8 7 2 SD CARD R W SELECT for more i information G YI 63 Perform color correction saturation hue SAT PHASE 00 between green and yellow UU S C U F E 63 yI 63 Perform yellow color correction saturation SAT PHASE hue 00 S C U F E 63 YI R 63 Perform color correction saturation hue SAT PHASE 00 between yellow and red UU S C U F E 63 mCOLOR ON Select whether or not to enable color CORRECT OFF correction for the selected GAIN switch L M H ON Enable correction SICIUIFIE OFF Disable correction The in the Adjustable Range column indicates the preset mode 104 8 3 4 LOW SETTING 8 3 5 MID SETTING
47. microprocessor CAMSOFT Display the software version for the external D SOFT Display the software version for the LCD OUT flash microprocessor CAM TABLE Display the table version P2CS OS Display the OS version for the streaming controller FONT ROM Display the character font version P2CS AP Display the application version for the streaming controller CAM DSP Display the program version for the FPGA MSC FPGA Display the program version for the FPGA1 Field Programmable Gate Array that streaming control FPGA processes camera block signals liels ay i FLT FPGA Display the program version for the FPGA CAM DSP Display the program version for the FPGA that processes recording playback signals FPGA2 that processes camera block signals Set Elin SIF FPGA Display the program version for the serial CAM SYS Display the program version for the FPGA interface FPGA FPGA that processes camera block signals cam en oe ie face ae i DIF FPGA Display program version for the IEEE1394 PULSE FPGA Display the program version for the FPGA interface FPGA that processes the CCD scanning a when AJ YAD800G is attached 8 8 7 HOURS METER Items Adjustable B narks Data Saved Range OPERATION Display total hours the camera power has been turned ON Display total hours the LCD monitor backlight power has been turned ON Display total number of times the power switch has been turned O
48. or the monitor SELECT MIX output C U F FRONT MIC 40dB Select the front microphone input level LEVEL 50dB C U F REAR MIC CH1 50dB Select the rear microphone input level LVL 60dB C U F REAR MIC CH2 50dB Select the rear microphone input level LVL 60dB C U F REAR LINE IN 0dB Select the rear line input level LVL 4dB C U F AUDIO OUT LVL 0dB Select the audio output level 4dB C U F HEADROOM 18dB Set the headroom standard level c u F 2048 WIRELESS ON Select whether or not to enable the alarm to WARN OFF trigger for poor wireless receiver reception C U F 119 8 6 6 TC UB Items Data Saved Adjustable Range Remarks TC MODE C U F DF NDF Set the time code mode DF Drop frame NDF Non drop frame lt Note gt Regardless of the setting of this option the AJ SPX800P always operates in non drop frame for 24P and 24PA modes UB MODE c u F USER TIME DATE EXT TCG FRM RATE REGEN Select the user bits mode USER Select UB value set in the LCD section Select local time hours minutes seconds Select local date and time 2 last digits of year month date time When CAM or VIDEO is selected in the menu option REC SIGNAL in the SYSTEM MODE screen users bit input to the TC IN connector is the reference When 1394 is selected users bit input to the
49. s OFF The KNEE POINT SLOPE set value is enabled when this setting is ON SKINDTL D Adjust the effect of SKIN TONE DTL S C U FJE i E ee CORING A CORING KNEE POINT 70 0 Set the KNEE POINT position in 0 5 steps S C U F E 7 gso SKIN TONE Used when obtaining the target hue for S C U F E 107 0 GET SKIN TONE DTL Align the center marker KNEE SLOPE 00 Set the KNEE SLOPE a ee a j and the target object with each other 0 setting is equal to KNEE OFF Y MAX 000 Set the maximum value of the brightness sija ARII vaiu l The adjustable range when using the AJ signal to which SKIN TONE effect is 99 98 eee eae 190 enabled S C U F E slclulFlE 255 MWHITE CLIP JON Set the WHITE CLIP feature to ON or OFF M OFF The WHITE CLIP LVL set value is enabled Y MIN 000 Set the minimum value of the brightness when this setting is ON signal to which the SKIN TONE effect is S C U F E 010 enabled WHITE CLIP 90 Set WHITE CLIP LEVEL S C U F E o55 LVL ios I CENTER 000 Set the center position on the axis the area where SKIN TONE is enabled S C U F E 109 022 A KNEE POINT 80 Set the AUTO KNEE POINT position in sJeJuJF E s mw ert ee TWIDTH foo Set the area width where SKIN TONE is ra O GANLAUTG KNEE ONA evo enabled along the I axis above and below S C U F E J107 i i ate the CENTER A KNEELVL 100 Set the AUTO KNEE LEVEL S C U F E 255 105 Q WIDTH 000 Set the area width where SKIN TONE is P enabled along the Q axis abo
50. selector switches CH1 2 Record same signals as CH1 and lelulFl CH2 The in the Adjustable Range column indicates the preset mode Items Data Saved Adjustable Range Remarks 25M REC CH SEL 2CH 4CH C U F Select the audio channels to be recorded in the DVCPRO and DV formats 2CH Only recorded in CH1 and CH2 4CH Recorded in all channels from CH1 to CH4 TEST TONE Select the test signal NORMAL Output test tones to CH1 2 when the OUTPUT AUTO KNEE selector switch is set to BARS and the AUDIO IN switch CH1 is set to FRONT Output test tones to CH1 2 when OUTPUT AUTO KNEE selector switch is set to BARS Disable test tone output Output test tone to the channels where the AUDIO IN switch CH1 or CH2 is set to FRONT when OUTPUT AUTO KNEE selector switch is set to BARS The test tone is not output to CH3 and CH4 ALWAYS OFF CHSEL 8 6 5 MIC AUDIO2 Items Adjustable Remarks Data Saved Range FRONT MIC JON Select the phantom power supply for the POWER OFF front microphone C U F REAR MIC ON Select the phantom power supply for the POWER OFF rear microphone C U F AUDIO OUT JON Set the audio output circuit OFF OFF Power down output circuit to disable output IclulFl_ ON Enable output MONITOR STEREO Select the signal format f
51. the function to be allocated to WHITE disconnected from the camera ATW BAL switch B recorder VAR MEM Function to store values set by OFF Does not store camera related set executing auto white balance values ATW Function to execute auto tracking C U F white balance ECU REC CHK R REVIEW Select the camera recorder operation to be VAR Function to apply color temperature SW PLAY performed when the ECU REC CHECK set by COLOR TEMP B button is pressed C U F E R REVIEW Perform REC REVIEW COLOR TEMP 3200K Set the color temperature when VAR is PLAY Play back the most recently B selected under AWB B i inni 5600K lelulFle recorded clip from the beginning lclulFlE ATW SPEED NORMAL Select the control speed for the auto SLOW tracking white balance IC U F E FAST The in the Adjustable Range column indicates the preset mode 8 5 7 USER SW GAIN 8 5 8 IRIS Items Adjustable Remarka Items Adjustable Remarks Data Saved Range Data Saved Range S GAIN PK Select whether or not to enable 30dB for A IRIS LEVEL 000 Set the target value for auto iris 30 dB SUPER GAIN Enable 050 cJulFJeE sa DIbab le c U F E i00 36 dB PK Select whether or not to enable 36dB for A IRIS PEAK 000 Determine the peak to standard ratio for the S
52. tus indications OFF LEDs remain off USB ON lU F Select the USB drive mode when using the P2 card as bulk storage by connecting the AJ SPX800P with a PC via USB2 0 ON Switches to the USB drive mode Recording playback or thumbnail operation via the AJ SPX800P is not permitted Stops the USB drive mode and returns to normal operation lt Note gt After the power is turned off this setting defaults to OFF when the power is next turned on OFF The in the Adjustable Range column indicates the preset mode 99 8 2 2 OPTION MODE 1 8 2 3 OPTION MODE 2 Items Adjustable Remarks Items Adjustable Remarks Data Saved Range Data Saved Range P OFF GPS HOLD Select whether or not to hold the UMID GPS COMPONENT OFF Sets the analog component output level to DATA CLEAR position information while the power is OUT BETACAM Triax 26 pin extender or external VTR turned off thereby keeping this information M2 OFF Saves power and stops output as status data holding the previous value However when either a 26 pin until the power is turned on again which extender external VTR or Triax is enables a new measurement to start connected output automatically HOLD Hold and save the data switches to BETACA
53. urrent SAFETY AREA 80 Set the position of the safety zone OFF gain setting S GAIN and DS GAIN 90 C U F E C U F E 100 IRIS OFF OFF Disable indications of both the super 3 IRIS iris ON status and the iris value FRAME lG F a Hane N er SAIRIS IRIS Enable only the iris value indication 14 9 pk S S IRIS Enables indications of the super iris A R S ON status and the iris value c U F ESA The VISTA ratio is 16 8 65 S Enable indication of the super iris ON FRAME MARK ON Set the frame marker to ON or OFF status A The iris value indication and the iris c u F E OFF ide indicati indicati override indication non indication are FRAMELVL 0 Set the level outside the frame marker C U F E interlocked 0 Equivalent to signal OFF CAMERAID BAR Select when to enable the ID mix during 15 15 Same brightness as center area This CAM recording setting however is disabled if the ALWAYS BAR Enable when recording color bars C U FIE FRAME SIG is set to VISTA OFF CAM Enable when recording camera image ALWAYS Enable always OFF Disable ID mix C U F E 8 4 3 USER BOX IDPOSITION UPPERR Set the camera ID recording position UPPER L UPPER R Upper right M LOWER R UPPER L Upper left Teme Austa Remarks LOWERL LOWERR Lower right Data Saved Range el lEl LOWERL Lower left USER BOX ON Select whether or not to display the USER OFF BOX DATE TIME ON Select whether or not to simultaneously mix ICIUJFIE OFF the
54. utput OFF Disable output 102 BRIGHTNESS Adjust the LCD monitor brightness COLOR LEVEL Adjust the LCD monitor chroma level 7 Adjust the LCD monitor contrast BACKLIGHT HIGH NORMAL Select whether or not to set the LCD monitor brightness to always high HIGH Set to always high NORMAL The brightness changes according to the BRIGHTNESS setting SELF SHOOT C U F NORMAL MIRROR Select whether or not to change the LCD monitor to mirror image NORMAL Do not change to mirror image MIRROR Change to mirror image ASPECT CONV c u F LT BOX SQUEEZE Select a screen ratio for images displayed on the LCD monitor LT BOX Display images in the letter box size SQEEZE Display images in the squeeze size lt Note gt This item is enabled only when ASPECT described in 8 2 1 SYSTEM MODE is set to16 9 The in the Adjustable Range column indicates the preset mode 8 3 PAINT 8 2 7 GENLOCK 8 3 1 ROP Items Adjustable Remarks Items Adjustable Remarks Data Saved Range Data Saved Range GENLOCK INT Switch the camera synchronising signal MASTER PED 200 Set the master
55. ve and below S C U F E 109 005 the CENTER A KNEE 1 Set the AUTO KNEE response speed s clul Fle 255 RESPONSE Fi The smaller Ag value the faster the QPHASE 125 Set the phase in the area where SKIN TONE s c u F E SPONSA K is enabled based on the Q axis 000 lt Note gt S C UF Ene The items indicated by are the setting items for PAINT MENU SW M R W in the lt SD CARD R W SELECT gt screen The items without IM are the setting items for PAINT MENU LEVEL R W Please refer to 8 7 2 SD CARD R W SELECT for more information The in the Adjustable Range column indicates the preset mode 107 8 3 10 GAMMA 8 3 11 FLARE Items Adjustable Remarks Items Adjustable Remarks Data Saved Range Data Saved Range MASTER 0 35 Set the master gamma in 0 01 steps R FLARE 000 Set the R FLARE SAMMA 0 45 100 Hag S C U F E S C U F E 0 75 GFLARE 000 Set the G FLARE R GAMMA 15 Set the Rch gamma 100 00 S C U F E B FLARE 000 Set the B FLARE S C U F E 15 BGAMMA H5 Set the Bch gamma slclulr 00 SIclUIFIE 5 ies in the Adjustable Range column indicates the preset GAMMA MODE STD Select the gamma Moge SEL NEWS STD Standard gamma feature FILM LIKE1 NEWS This video gamma feature can FILM LIKE2 effectively reproduce gradations by reducing whiteouts and blackouts when shooting an object with partially highlighted areas This gamma is

Panasonic AJ-SPX800 Menu Information

Contents

Download Pdf Manuals

Related Search

Related Contents