Palsonic TFTV663R User's Manual
Contents
1. RETURN In D SUB mode press to scroll to next screen Screen SELECT MOVE menu RETURN Freezing the picture Press the FREEZE button to freeze the image on the screen the video sources still run Press again to restore Note e lf a fixed image is displayed on the screen for a long time that fixed image may become imprinted on the screen and remain visible Therefore do not freeze the picture for a long time e In some mode the FREEZE function can not work To adjust the picture Press MENU The on screen menu opens with the PICTURE menu displayed then press v to access Press v 4 to highlight an option press 4 gt to adjust the option If a sub menu exits press gt or OK to access You can select Picture Mode Selects the picture mode You can select Dynamic a bright and vivid picture Standard a standard picture Mild a soft picture User user customized picture Note You can also press RMODE to select the picture mode Contrast Adjusts the contrast Brightness Adjusts the brightness Colour Adjusts the colour saturation Sharpness Adjusts the sharpness Tint Adjusts the image tint Only for NTSC system Colour Temperature Selects the colour temperature You can select Warm to enhance the reds Cool to enhance the blues or Normal Aspect Ratio Selects the aspect ratio of the picture You can select2. S EE Wwe time PICTURE 01 Jan 2011 15 30 Press MENU Press 4 orb to display TIME menu Off Time Off press toaccess On Time Off Sleep Timer Off Press or v toselect Auto Sleep Auto Sleep On Time Zone NSW ACT GMT 10 gt Press 4 or gt to select On to turn on Auto Sleep To cancel the function select Off OQA SELECT AO MOVE MENU RETURN To close the menu press EXIT button To set ON timer ON timer feature allows you to set the TV to turn on automatically to a preset channel or source at a certain time and at certain volume Once you set ON timer it will effect every day Off Time Press MENU Press or to display TIME menu On Tim Activate Hour lt 00 press v toaccess Sleep Timer 3 Minute lt 00 Auto Sleep Volume 30 Press gt orv to select On Time Press bor OK to Time Zone lt NSW ACT GMT 1 inibi lt DTV access the submenu annel lt 10 ae E cu ERE 98 Now the Activate item is highlighted press 4 or gt to select On to enable ON timer To cancel select Off After Activate is set to On press gt or v to go through the item list adding the details of the on timer by using 4 orb tomake selections e Hour Minute Sets the desired time to turn on the TV e Volume Sets the volume level for the On Timer program e Source Sets the source to be viewed when the TV turns on e Channel Sets the channel that will be tuned when the TV turns on When finished use or v
3. 13 Safety checks Upon completion of service or repair work request the service technician to perform safety checks to ensure that the product is in proper operating condition 14 Wall or ceiling mounting When mounting the product a wall or ceiling be sure to install the product according to the method recommended by the manufacturer This is a safety feature 4 Important Safety Precautions Continued 15 Stand Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus Do not place the product on an unstable trolley stand tripod or table Placing the product on an unstable base can cause the product to fall resulting in serious personal injuries as well as damage to the product When mounting the product on a wall be sure to follow the manufacturer s instructions Use only the mounting hardware recommended by the manufacturer 16 Careful move When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Sudden stops excessive force and uneven floor surfaces can cause the product to fall from the trolley Never attempt to move the TV unless the AC power cord has been disconnected 17 Lightning Unplug this apparatus during lightning storms or when unused for long periods of time For added protection for this television equipment during a lightning storm or whenit is left unattended and unused for long perio
4. You must install your TV into the stand in order for it to stand upright on a cabinet or other flat surface If you intend to mount your TV ona wall or other vertical surface you must remove the stand column Cautions Make sure that you handle your TV very carefully when attempting assembly or removal of the stand If you are not sure of your ability to do this or of your ability to use the tools necessary to complete this job refer to a professional installer or service personnel The manufacturer is not responsible for any damages or injuries that occur due to mishandling or improper assembly When using a table or bench as an aid to assembly make sure that you put down a soft cushion or covering to prevent accidental scratching or damage to your TV s finish The speaker is not intended to support the weight of your TV Do not move or handle your TV by the speaker This can cause damage to your TV that is not covered by the manufacturer s warranty Before attempting assembly or removal of the stand unplug the AC power cord Bi To install the stand Remove the stand from the box and place it on a table or bench You must pay attention to the direction of the stand The wide portion of the stand should go towards the front of the TV 2 Lay your TV flat screen down on the edge of a table or bench Make sure that you put down a soft cushion or cloth so that your TV is not scratched 3 Putthe stand close to the TV back ali
5. The backlight will turn off automatically after some seconds Select Normal then the backlight works normally Adjusting the Computer Image PC only Before adjusting the screen make sure that you select the correct source D SUB To adjust the computer image Press MENU The on screen menu opens with PICTURE Sciesn menu displayed Press gt or v repeatedly to scroll the menu page until you select the Screen item then press or OK to access Press v or 4 to highlight an option press 4 or to adjust GE SELECT GO NENU RETURN the level or press OK to confirm You can select e Auto Adjust Automatically adjusts the image settings such as position and phase Horizontal Pos Moves the image right or left Auto Adjust Tee ea Vertical Pos Moves the image up or down Vertical Pos Size Adjust the horizontal width of the image on the Size screen Phase e Phase Adjusts the focus of stable images Ses anor A To close the menu press EXIT button Setting Clock amp Timer Setting Time Zone amp TV clock To set Time Zone TV clock For DTV programs the clock displays the current time zi EB ES using time data received from your TV service provider This 4 E VS ES Xd un information is based on a digital channel and does not need PICTURE to be set manually but you need to select your time zone Clock 01 Jan 2011 15 30 firstly Off Time Off On Time Off For ATV prog
6. simply press the e m button on your remote control Selecta DTV programme you desired to record press Current time e m button to begin recording Channel name Now a control bar will appear at the bottom screen for you to EOS A control pd 2 ABC TV Sydney From the control bar you can obtain information such as 00 00 03 British Isles A Natural History 0000 07 50 h y channel name programme name current time and recorded length duration etc Program name Duration st After some seconds this control bar will be minimized in size Recorded length and glitter on the bottom right corder To restore press OK 2 To stop recording press the m button again Timer recording future program recording EPG Electronic Program Guide is your on screen digital program guide for navigating selecting and discovering program event by time title channel You can also enjoy the scheduling of future recordings by setting the timer recording through EPG then go on vacation and come back to watch the program eventas if it were live broadcast 22 Sep 2011 09 00 Press EPG button to open the EPG window 2 ABC TV Sydney 2 Press 4 or gt button to select a channel you want to record PATE T Press v or to navigate and select a desired program 22 08 47 09 05 British Isles A Natural History event usc 3 Press BLUE button to open RECORDER menu Now do the 22 Sep 10 00 10 32 Midday Report followi
7. 16 9 Shows a full screen picture in 16 9 mode 4 3 Shows picture in 4 3 display mode Recommended not let TV remain in this mode for extended period of time as to protect the screen Auto Selects the correct aspect ratio automatically Zoom Enlarges the picture vertically The top and bottom may be cropped Zoom2 Enlarges picture both horizontally and vertically The edges may be cropped 1 1 pixel mapping D SUB HDMI only Displays an input source without scaling it This option is available on either of these two conditions D native resolution 1920x1080 input resolution 1920 x 1080 native resolution 1366x768 input resolution 360 x768 Note You can also press ASPECT to select the aspect ratio e Noise Reduction Selects the noise reduction mode to reduce picture noise snow You can select Low Middle High or Off Overscan D SUB HDMI only Turn this On to adjust the picture s reproduction rate available when the TV s aspect ratio is in 4 3 16 9 and the input signal is in video format Adaptive Contrast Turn this On to optimize the picture display for a more vivid image HDMI Black Level HDMI only Selects the black level on the screen Select Low for darker screen Normal for brighter screen Available when RGB signal is input through HDMI jack Screen D SUB only Adjusts the computer image 23 Adjusting the Sound Adjusting the sound To
8. 3 Press gt orv to navigate among files or folders 4 Press to start slide show from current photo file or press OK to open the highlighted folder After a photo folder is opened you can press GREEN button to view photos in thumbnail then uses v 4 gt to navigate press 1to start slide show from current photo During photo slide show you can press u Play pause e a Stop lt Goto the previous photo PPI Go tothe next photo DSC08758 jpg WxH 1920x1200 C5 Rotate the photo clockwise To restore to slide show press DSC08759 jpg Size 53 KBytes DSC08760 jpg P Press or more times to zoom in the photo In zoom in DSC08761 jpg mode you can press arrow buttons to pan the photo lt lt Press one or more times to zoom out the photo A BACK ENTER D SELECT Py PLAY PAUSE Exit slide show Exit slide show and return to USB main menu When USB main menu is on the screen you can press C5 Press one or more times to select a repeat mode You can select repeat to show one photo repeat to show all photos when slide show reaches end no repeat when it reaches end and go to USB main menu Note When a photo file is selected you can press OK button to mark it as favourite and a check mark appears press OK again to cancel the mark Do so to create your favourite photo list then slide show goes among these favourite photos To quickly select unselect all photos inside this
9. adjust the sound Press MENU Theon screen menu opens Press 4 or b toselect SOUND menu press to access Press v or tohighlight an option press 4 or gt toadjust the Sound Mod ound Mode option You can select Treble Bass e Sound Mode Selects the sound mode You can select Balance Auto Volume Standard for normal programs S rroundSound Music for musical programs Movie for movies SELECT OO MOVE CwENU RETURN e Sports for sports programs User for user setting sound mode Press v or ato scroll the menu SOUND Visual Impairment Mode Volume Note You can also press S MODE on the remote control to select the sound mode Treble Adjusts Treble high sounds Bass Adjusts Bass low sounds SC PICTURE Balance Adjusts the balance between the left and right audio channels Auto Volume Turns on to equalize the overall volume levels for all channels Surround Sound Turns the Surround sound effect on or off Visual Impairment Sets the mix of visually impaired audio with regular audio When available visually impaired audio includes audio descriptions of on screen action Enable this by setting Mode to On also you can adjust the volume from this menu OCS SELECT AO MOVE RETURN To close the menu press EXIT button Stereo and Bilingual transmissions For ATV programmes If stereo or dual language broadcasts are tr
10. best quality possible To play from the HDMI device Turn on your TV then press SOURCE button The Input Source menu opens 2 Press Aorvto select HDMII or HDMI2 or HDMI3 correspondingly then press OK to confirm 3 Turn on the HDMI device and set it to the correct mode Refer to the instructions that came with the HDMI device Note If the external device has DVI output only use a DVI to HDMI adapter cable to connect to the HDMI terminal Connect the audio cable to the PCIN AUDIO jack on the TV rear To connect a component video device Connect the Component Video cable between the Y Pb Pr input jacks on the TV and Y Pb Pr output jacks on the device Connect the Audio cable between the AUDIO input jacks on the TV and AUDIO output jacks on the device To play from the component video device Turn on your TV then press SOURCE button The Input Source menu opens 2 Press or to select Component or Component 2 if COMPONENT 2 jacks are connected then press OK to confirm 3 Turn on your external device and set it to the correct mode See the device s user guide for more information To connect a computer Connect a D SUB VGA cable between the D SUB jack on the computer and the D SUB input jack on the unit Connect an Audio cable between the AUDIO output on the computer and AUDIO input jack on the unit To play video from the computer Turn on your TV then press SOURCE button The Input Sour
11. e Working temperature 5 C to 40 C The extended use of fixed image programme material can cause a permanent after image on the screen This background image is viewable on normal programs in the form of a Stationary fixed image This type of irreversible screen deterioration can be limited by observing the following steps A Reduce the brightness contrast setting to a minimum viewing level B Do not display the fixed image for extended periods of time C Turn the power off when not in actual use Important Information Regarding Use of Video Games Computers Captions or Other Fixed Image Displays e Do not allow a still picture to be displayed for an extended period as this can cause a permanent after image to remain on the screen Examples of still pictures include logos video games computer images teletext and images displayed in 4 3 mode CAUTIONS e he permanent after image on the screen resulting from fixed image use is notan operating defect and as such is not covered by the warranty e his product is not designed to display fixed images for extended periods oftime To clean this unit wipe with a soft dry cloth If the surfaces are extremely dirty use a soft cloth dipped in a soap and water solution or a weak detergent solution e Useeyeglass cleaner to remove stubborn dirt from the screen e Neveruse alcohol paint thinner or benzine to clean this unit e Before using a chemically treated cloth read t
12. folder move the cursor to its volume row first row and press OK then choose Select or UnSelect 35 Using USB Multi Media Player continued Playing music Generally audio player supports MP3 WMA and AAC formats but for the sake of technical updating some formats above may not be supported MOVIE Page 1 1 To listen to music Connect USB device and switch to USB mode the USB main menu will appear automatically 2 Press 4 or toselect MUSIC menu and press OK to access 3 Press 4or v to navigate among files or folders and select your desired one Press to start music playing from current file or press OK to open the highlighted folder During music playing you can press gt Play pause Stop playing gt gt Fast forward MESSIAH mp3 au lt lt Fast reverse tie OLYMPICS mp3 Bit Rate 184K ka Play the previous PEACE mp3 Slane pri Play the next CHRISTMAS mp3 200 a Year 2010 EXIT Exit music play A BACK OK ENTER cu PA USE Exit and return to USB main menu When USB main menu is on the screen you can press C5 Press one or more times to select a repeat mode You can select repeat to play one music repeat to play all music files when it reaches end no repeat when it reaches end and go to USB main menu Note e When selecting file or folder from the list you can press lt gt to scroll the page e Whenamusic
13. improvement 39 PALSONIC 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL 02 9313 7111 FAX 02 9313 7555 PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA 1300 657 888 5944038360 Ver 1 0
14. it to check how strong your Div Manual Tuning DTV signal is and whether you need to adjust your antenna The higher the signal strength is the less likely you are to experience picture degradation OQA SELECT AY MOVE MENU RETURN UHF CH 23 Please select channel then Press OK to search DTV 4 4 When the multiplex is found any channels that are not currently Radio 2 in the channel list will be added and the channel information will Bad Normal Good be updated During the process you can press MENU or EXIT to exit the search Memorizing the Channels amp Programme Edit XB AEN CHEST analogue only Use the Manual Tuning operation if desired channels can not be preset by Auto Tuning or if you would like to preset channels to specific position numbers one by one In CHANNEL menu press v or to select ATV Manual Tuning then press gt or OK to access the setting menu Auto Tuning DTV Manual Tuning From ATV Manual Tuning setting menu press v or 2 to select ATV Manual Tuning an item press 4 or b toset the item as shown below Programme Edit File System A Storage To Position selection Press 4 or button to select the position you want to store B System Sound system selection If certain channel s sound is abnormal it may be that the sound system setting is wrong In ATV Manual Tuning this case select another sound system SELECT GG MOVE MENU RETURN ut C Current CH Selects current
15. the lower screen this selected channel s now and future programme events are listed Use 4 or v to navigate among the programme events To quickly navigate among the list press RED button to go to previous day list and GREEN button to next day list and press INFO button to get more detailed information if available about the programme you choose 22 Sep 2011 09 00 3 Toclosethe EPG press EXIT or EPG button Note e Theabove OSD is only served as an example The availability of EPG information depends upon the broadcaster e loenable EPG to work properly it is suggested to set the appropriate time zone Basic Operations Continued On screen menu overview List of main menus to help you with operations PICTURE menu SOUND menu e 4 PICTURE OC PICTURE Picture Mode Sound Mode Contrast Treble Brightness Bass Colour Balance Sharpness Auto Volume Tint Surround Sound OCS SELECT OY MOVE RETURN SELECT AO MOVE RETURN OPTION 01 Jan 2011 15 30 Off Time Off Hearing Impaired Off On Time Off S PDIF Output AUTO Sleep Timer lt Off Audio Preference Dolby Digital Auto Sleep lt Off Audio Only Normal Time Zone lt NSW ACT GMT 10 gt OY MOVE menu RETURN OCS SELECT OY MOVE MENU RETURN LOCK menu CHANNEL menu Is i MM 2 A OPTION OUND OPTION Lock System Auto Tuning Set Password DTV Manual Tuning Block Programme ATV Manual Tuning Parental Guidance lt No Block Programm
16. to mute the sound Press again to restore the sound M 23 CH Changes channel up and down T SHIFT REC LIST 24 T SHIFT time shift button u Play Pause button when in time shifting or USB Media Play 25 REC LIST O button Shows Recorded List BACK button USB Media Play 26 5 Fast forward 27 Repeat mode select USB Media Play 28 gt gt Next SITO NNNM n ce XEM ct pot 29 Coloured buttons RED GREEN YELLOW BLUE Direct access to the coloured items or corresponding pages Teletext TTX Subtitle Hold Reveal 30 Teletext control buttons TTX Used to enter or exit teletext mode Teletext Subtitle Displays the subtitle or the teletext subpage Teletext Hold To stop or resume sub page acquisition Teletext Reveal To reveal or hide the concealed information Teletext Size Press this button several times to display the upper then the lower part of the screen and then return to the normal size teletext page Teletext Index Press this button to view the main index page Teletext Mix Press the button to display the Teletext on the screen with transparent background while viewing the TV programme simultaneously Teletext Update Press the button to view the updated teletext page Teletext 8 Preparations Installing and removing the stand If the stand is provided please read these instructions thoroughly before attempting this installation
17. 1 CH2 352 CH3 353 CH4 354 CH5 355 CH6 Select Press MENU to return to previous menu Press EXIT to exit the menu screen directly Then the lock comes into effect and these locked programmes are blocked To viewed locked programmes just input the password To disable the lock system set Lock System to Off and all locked programmes can be viewed Setting Child and Rating Locks continued Saatel SEC digital only To set and enable parental ratings aa 7 Some digital broadcasters rate their programmes according to age PICTURE J SOUND You can set your TV to display only programmes with age ratings Lock System higher than your child s age Before setting parental ratings you Set Password have to enable the lock system Block Programme Parental Guidance No Block Restore Ractony E N Use password to access LOCK menu highlight Lock System anduse 4 orb toselect On to enable the lock system SELECT GO MOVE Com SEU Press to highlight the Parental Guidance use 4 or gt to select an age rating All programmes beyond the selected age rating will be blocked You can select PG Parental Guidance Suggested Bloc Content is such that parents may not want Block G and above their children to view the programme Block PG and above Block M and above G General Audiences Content not offensive to most viewers M Mature Audience Suitable for mature audience MA Matu
18. OWNER S MANUAL Halsonic 66CM WIDE SCREEN LCD TV MONITOR MODEL TFTV663R C N111 PALSONIC 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL 02 9313 7111 FAX 02 9313 7555 PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA 1300 657 888 Contents Contents Important Information Important Safety Precautions Important Notice Identification of Controls Preparations Making Connections First Time Configuration Basic Operations Memorizing the Channels Programme Edit Adjusting the Picture Adjusting the Sound Adjusting Basic Settings Adjusting the Computer Image Setting Clock amp Timer Setting Child and Rating Locks Making Use of PVR recording Function Teletext amp Subtitle Using USB Multi Media Player Troubleshooting Specifications 20 23 24 25 26 28 30 34 35 38 39 Important Information IMPORTANT INFORMATION If a television is not positioned in a sufficiently stable location it can be potentially hazardous due to falling Many injuries particularly to children can be avoided by taking simple precautions such as e Using cabinets or stands recommended by the manufacturer ofthe television e Onlyusing furniture that can safely support the television e Ensuring the television is not overhanging the edge of the supporting furniture e Not placing the television on tall furniture for example cupboards or bookcases without anchoring both the furniture and
19. Press 4 orb todisplay OPTION menu press w toaccess OO SELECT amp X MOVE NER RETURN To close the menu press EXIT button From Option menu you can select and adjust the following OSD Language Selects on screen menus language In this model only ENGLISH is available Hearing Impaired digital only Selects On to display the subtitles if available for the hearing impaired S PDIF Output digital only Selects the digital audio output mode for S PDIF You can select AUTO or PCM AUTO This mode outputs Dolby Digital or PCM to the digital audio output jack S PDIF providing it is being broadcast PCM Select this when a 2ch digital stereo amplifier is connected to the TV When you select a Dolby Digital or MPEG audio track the sound is converted to the PCM 2ch format and output Audio Preference digital only Selects the audio track to output You can select MPEG or Dolby Digital MPEG If the programme has MPEG and Dolby Digital tracks select MPEG to output MPEG track in preference Dolby Digital If the programme has MPEG and Dolby Digital tracks select Dolby Digital to output Dolby Digital track in preference Manufactured under license from Dolby Laboratories I D O L DY Dolby and double D symbolare trademarks of Dolby Laboratories DIGITAL Audio Only When listening to radio programs or listening to MP3 music under USB music play you can set Audio Only to Power Saving for energy save
20. Sydne 20 ABC HDTV 21 ABC2 22 ABC TV 350 CH1 351 CH2 352 CH3 353 CH4 354 CH5 355 CH6 Move Select Favourite List v 2 ABC TV Sydne v 22 ABC TV 350 CH1 v 353 CH4 1 S 03 e 2 C 42 v 4 C 04 AO Move Select Channel List 1 S 03 2 42 3 S 04 4 C 04 Select Favourite List v 2 ABC TV Sydney 22 ABC TV v 350 CH1 e 353 CH4 m 1 S 03 ve tv 2 C 42 v 4 C 04 AG Move Select Digital programme selection After you have tuned the TV you have several ways to select DTV programmes Be sure to select DTV through the Input Source menu See the above steps for source selection When watching digital programme and you want to listen to radio simply press TV RADIO button to switch To return to TV program press TV RADIO button again When watching analogue programme the TV RADIO button does not work e Press CH 4 or CH to go to the next or previous channel The skipped channels not be selected e Press the number buttons to directly select any channel you want then wait for the channel to change Note Button presses must be within three seconds of each other e Press LIST to display the Channel List then press or 4 to select a channel and then press OK e After you have created the favorite channel list you can press FAV LIST button to display the favorite channel list Use 4 or to select a channel and then press OK e go to the previous channel viewe
21. acturer Do not use attachments not recommended by the manufacturer Use of improper attachments can result in accidents 6 Power source This product is intended to be supplied by a listed power supply indicated on the marking label If you not sure of the type of power supply to your home consult your product dealer or local power company For added protection for this product during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the cable system 7 Power cord protection Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus NOTE where the mains plug or an appliance coupler is used as the disconnect device the disconnect device shall remain readily operable 8 Overloading Do not overload wall outlets extension cords or convenience receptacles on other equipment as this can result in a risk of fire or electric shock 9 Entering of objects and liquids Never insert an object into the product through vents or openings High voltages are present in the product and inserting an object can cause electric shock and or short internal parts For the same reason do not spill water or liquid on the product 10 Servicing Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power
22. ailable To Turn On Off Teletext Select a TV channel providing the Teletext program Press button to display the teletext Press TTX button again to switch back to TV screen Teletext control button list e a v button Used to scroll page upward or downward e 0 9 button Directly select any page by using 0 9 e Coloured buttons RED GREEN YELLOW BLUE Coloured areas are displayed at the bottom of the screen The 4 coloured buttons are used to access the items or corresponding pages e Hold button Certain pages contain sub pages which are automatically displayed successively This button is used to stop or resume sub page acquisition e Reveal button Press the button to reveal the concealed information such as games solutions Press the button again to hide the information e Size button Press this button several times to display the upper then the lower part of the screen and then return to the normal size teletext page e Index button In teletext mode press this button to display the index page e Mixbutton Press the button to display the Teletext on the screen with transparent background while viewing the TV programme simultaneously e Update button Press the button to view the updated teletext page e Subtitle button Press the button to display the teletext subpage if available Subtitle e For analogue programs if the programme has subtitle press Subtitle button to display subtitle on th
23. alongside the selected channel in the list which means this channel will be skipped To cancel the skip setting press BLUE button again and the symbol disappears Repeat the above steps to set more programs to skip Press EXIT to close the menu Now when you press CH 4 v these unwanted channels will be skipped Note If the Programme Edit menu has more than one page you may press or v to scroll the page upward or downward You can delete your unwanted channels from the channel list After deleting you can not find them unless you perform a new channel search 4 Navigate to the CHANNEL menu press or to select Programme Edit press gt or OK to open the Programme Edit menu Press vora to select your unwanted channel press RED button and a delete symbol appears alongside the selected channel in the list Press RED button again to confirm the deleting and this channel is deleted Use or to select other unwanted program and press RED button to delete Press EXIT to close the menu Note If the Programme Edit menu has more than one page you may press or wv to scroll the page upward or downward Adjusting the Picture Adjusting the picture Picture Mode Contrast Brightness Colour Sharpness Tint OED SELECT AO MOVE MENU RETURN Press or to scroll the menu Colour Temperature Aspect Ratio Noise Reduction Overscan K Adaptive Contrast lt OCS SELECT OY MOVE
24. ansmitted the word Stereo or Dual will appear on the screen each time you change channels disappearing after a few seconds If the broadcast is not in stereo the word Mono will appear Stereo Press STEREO button to select Stereo or Mono Bilingual Bilingual transmissions are rare If they are transmitted the word DUAL will display Choose the desired channel number and if the word DUAL appears press STEREO to select NICAM DUAL A NICAM DUAL B Mono NICAM broadcast or DUAL A or DUAL B German stereo bilingual broadcast For DTV programmes The digital TV transmission system is capable of simultaneous transmission of many audio tracks for example simultaneous translations of the programme into foreign languages or different commentators for sport events You can press STEREO button and then use or 4 to select the audio track Audio Languages MPEG English DoilbyD English Note The availability of these additional multi tracks depends upon the broadcaster Adjusting Basic Settings Adjusting the Computer Image Adjusting basic settings ZA 5 To adjust basic settings 4 N 4 O at J g b f r 4 J e DYOS ITS E PICTURE SOUND E option Lock Press MENU The on screen menu opens Off Hearing Impaired S PDIF Output AUTO Audio Preference Dolby Digital l Press v or to select an option press 4 orb to adjust the Audio Only Normal option
25. antenna connection No color dark picture abnormal color Adjust the color saturation in the video setting Only snow and noise appear e Check the antenna connection onthescreen e Iryanother channel it could be station trouble e Adjust the antenna e Movethe TV away from noise sources such as cars neon signs or hair dryers Double images e Usingahighly directional outdoor antenna may solve the problem Good picture no sound e Thesound may be muted Press MUTE again to cancel e Communication problems may occur if infrared communication Audio noise equipment e g infrared cordless headphones is used near the TV Move the infrared communication equipment away from the TV until the noise is eliminated e These channels may be set skipped You may cancel the skip setting through the menu or select them with number buttons No picture screen not lit No sound Screen lit good sound Dotted lines or stripes One or some channels can t be displayed e These channels may be locked or blocked you may go to LOCK menu and set Lock System to Off e You may use the super password 2580 lf a setting option appears in gray this indicates that the settings Some items can t be accessed option is unavailable in current input mode When the TV is in use there is a natural rise in temperature causing the cabinet to expand or contract and may be accompanied by a slight creaking noise This is not a malfunct
26. are followed 21 Heat sources Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 22 Panel protection The display panel used in this product is made of glass Therefore it can break when the product is dropped or impacted upon by other objects Be careful not to be injured by broken glass pieces in case the display panel breaks 23 Pixel defect The display panel is a very high technology product giving you finely detailed pictures Occasionally a few non active pixels may appear on the screen as a fixed point of blue green or red Please note that this does not affect the performance of your product WARNING For continued safety apparatus with class construction shall be connected to a mains socket outlet with a protective earthing connection Important Notice ll About Temperature ll About After Image Cleaning and Maintenance Do not use in hot and cold rooms locations e When the unit is used in rooms locations with low temperature the picture may leave trails or appear slightly delayed This is not a malfunction and the unit will recover when the temperature returns to normal e Donotleave the unit in ahotor cold location Also do not leave the unit in a location exposed to direct sunlight or near a heater as this may cause the cabinet to deform and the screen to malfunction e Storagetemperature 0 C to 50 C
27. ause or standstill depending on the memory device s speed and stability e After recording you can connect the memory device to your PC to delete temporary data or format a partition to completely clear those unnecessary data Certain types of memory device such as some USB devices may not be compatible with this TV Checking file system of the external memory device A AS a To check PVR File System LZ b j gi Y i 1 ej SA AJ SY apr cM Connect your USB device or portable hard disk to the USB port on TV ande e side firstly DTV Manual Tuning ATV Manual Tuni 2 Navigate to CHANNEL File System menu to check file system Programme Edit File System Press MENU then use 4 or gt to select CHANNEL menu press to access Press gt or v to highlight File System then press to access SELECT MOVE RETURN Now do the following to check file system A Set Record Time From File System menu highlight Record Time press 4 or gt to set the recording length of time 1 Hr 6Hr can be selected Note The record time also depends on your timer setting through the EPG and your disk space If the recording timer setting is shorter then the timer setting has priority over the Record Time setting at the File System menu If no disk space left then the recording stops File System Record Time Select Disk BID EXIT COKDOK WEN Return OO Move OO Select B Select Disk From File System men
28. ce menu opens 2 Press or v to select D SUB then press OK to confirm 3 Turn on your computer and adjust the display properties as required Making Connections Continued VCR connection for playback Cables are often color coded to connectors Connect yellow to yellow red to red white to white Cables are often color coded to connectors Connect yellow to yellow red to red white to white To connect a VCR Connect the Audio Video cables between the Audio L R Video jacks on the TV and VCR To play the VCR Turn on your TV then press SOURCE button The Input Source menu opens 2 Press or v to select AVI then press OK to confirm 3 Turn on your VCR insert a videotape and press the Play button To connect a camcorder or game console Connect the Audio Video cables between the Audio L R Video jacks on the TV and the camcorder or game console Note If your game console has an HDMI connection you will get better quality using the HDMI connection instead of the AV connection To playback the camcorder or play the game console Turn on your TV then press SOURCE button The Input Source menu opens 2 Press or v to select AV2 then press OK to confirm 3 on the camcorder or game console then follow the instructions that came with the device to play from the camcorder or game console To connect a VCR for recording Connect an AV cable to the AV OUT jack
29. channel using 4 or gt System BG Current CH D Search Channel search operation Search Press b to search the band or 4 to search down the band Press 4 or gt repeatedly until your desired channel is displayed E Fine Tune Manual fine tuning SELECT 5 Press 4 or gt until better picture and sound are obtained F Frequency Shows current frequency it can not be adjusted During the process you can press EXIT to exit the operation 3 Press RED button to save your settings Dive e Heli EH channel is not already labeled you can label the channel to make it analogue only easier to identify You can also relabel a channel that is already labeled Press MENU Press 4 or b to select CHANNEL menu press w toaccess Auto Tuning Press vora to select Programme Edit press b or OK to DTV Manual Tuning open the Programme Edit menu and a programme list is ATV Manual Tuning displayed Programme Edit File System Within the programme list press v or a to select a channel you want to label press GREEN button to start to label A cursor appears at the edit field SELECT AY MOVE MENU RETURN Programme Edit EY Use to selecta character use 4 orb to move the cursor When finished press OK to confirm 3 S 04 The maximum length of label is 5 characters 4 C 04 5 Repeat the above steps to label more channels Note The labels of DTV channels are automatical
30. d press Co Analogue programme selection Be sure to select ATV through the Input Source menu See the above steps for source selection e Press CH 4 or to go to the next or previous channel The skipped channels can not be selected e Press the number buttons to directly select any channel you want then wait for the channel to change Note Button presses must be within three seconds of each other e Press LIST to display the Channel List then press or 4 to select a channel and then press OK e After you have created the favorite channel list you can press FAV LIST button to display the favorite channel list Use 4 or to select a channel and then press OK e go to the previous channel viewed press Co 16 Basic Operations Continued Volume adjusment To adjust the volume e Press the VOL to increase or decrease the volume e Press the MUTE button to temporarily turn off the sound To restore the sound press the MUTE button again Displaying program information Press the INFO button to display the information banner The information banner displays current status information such as the channel number and signal source Depending on the mode different information is displayed In DTV mode more information will be displayed Below figure is an example banner in DTV mode In DTV mode the information banner may contain e Current channel number and name e Currenttime e Current progra
31. ds of time unplug it from the wall outlet and disconnect the antenna This will prevent damage to the equipment due to lightning and power line surges 18 Do not use this apparatus near water for example near a bathtub washbowl kitchen sink or laundry tub in a wet basement or near a swimming pool and the like The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus Do not use immediately after moving from a low temperature to high temperature environment as this causes condensation which may result in fire electric shock or other hazards 19 Clean only with dry cloth Unplug this product from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleaners Use a damp cloth for cleaning 20 Ventilation Do not block any ventilation openings Install in accordance with the manufacturer instructions The vents and other openings in the cabinet are designed for ventilation Do not cover or block these vents and openings since insufficient ventilation can cause overheating and or shorten the life of the product Do not place the product on a bed sofa rug or other similar surface since they can block ventilation openings This product is not designed for built in installation do not place the product in an enclosed place such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instructions
32. e Edit Restore Factory Default File System Q9 SELECT OY MOVE RETURN OQA SELECT AY MOVE MENU RETURN Note eDepending on the signal tuned you may see different menu options on your screen The above main menus are illustrated under TV mode eMenu items that are not selectable are grayed out If without special indication this manual is described under TV mode eThe illustrations and on screen displays in this manual are for explanation purposes some are enlarged others cropped and may vary slightly from the actual ones To operate the OSD on screen display menu e Press MENU to call up the OSD main menu The screen will now display Picture menu Press 4 orb one or more times to select menu press to access PICTURE SOUND TIME OPTION LOCK CHANNEL menu can be selected From the menu press v 4 gt to navigate or adjust Press OK to confirm an entry or selection To return to previous menu press MENU To close the menu press EXIT 18 Memorizing the Channels Note If the Lock System is On Auto Tuning DTV manual tuning ATV manual tuning can not be operated without password For details please see lt Setting Child and Rating Locks gt section When in PVR recording time shifting CHANNEL menu can not be accessed Auto Tuning Auto Tuning will completely re tune the TV and can be used to update the channel list It is recommended that Auto Tuning is run periodically to ensure that all new serv
33. e screen To cancel press EXIT e For digital programs if the programme has subtitle press Subtitle button to display Subtitle Languages list and then use or gt to select subtitle press OK to confirm To cancel the subtitle go to Subtitle Languages list use or 2 to select Off and then press OK 34 Using USB Multi Media Player Notes about using USB You can connect a compatible USB device such as U disk portable hard disk MP3 card to your TV to view compatible photo movie text or play compatible music To use USB multi media player please go to USB source through Input Source menu by pressing SOURCE button Notes Never remove the USB device or turn off the TV while using the USB device It is recommended that you back up your USB device data The USB menu may vary in different situation If you want to pull out the USB device please exit USB mode first For instructions on using your USB device refer to the owner s manual of your USB device Please use English to name your files Otherwise the file names can not be shown correctly You can connect the USB device to the TV to display most photos in JPG BMP and PNG formats but for the sake of technical updating some formats above may not be supported Page 111 To view photos Connect USB device and switch to USB mode the USB MSTPVR main menu will appear automatically 2 Press 4 orb to select PHOTO menu and press OK to access
34. ect a VCR to these jacks to record programs 11 RF Connect an antenna or cable TV to this jack 12 RS 232 For service only Do not use 13 AC IN Plug the AC cord into this jack and 9 101112 into a power outlet Identification of Controls Continued Remote Control I POWER Switches the TV power on or Standby 2 FREEZE To freeze current picture 3 FAV LIST Displays the favourite channel list 4 S MODE Selects sound mode TVIRADIG STEREO 5 0 9 number buttons Press to enter channel numbers or input password 6 ASPECT Selects the screen aspect ratio SOURCE FAV LIST P MODE 7 MENU Displays the main menu screen 8 4 v 4 OK Press the arrows to navigate through the menus adjust an item Press OK to confirm a selection or enter a sub menu 9 EPG Displays the Electronic programme Guide DTV only 10 VOL Increases or decreases the volume I I INFO Displays the information banner ASPECT 12 e 2 INSTANT RECORD STOP button PVR recording menu 13 44 Fast reverse 14 44 Previous 15 SOURCE Displays input source menu 16 TV RADIO Switches between TV and Radio mode DTV only 17 STEREO Selects bilingual stereo or mono ATV only or audio track DTV only 18 PMODE Selects picture mode 19 CD Returns to the previous channel 20 EXIT Exits the menu screen 21 LIST Displays the channel list 22 MUTE Press
35. file is selected you can press OK button to mark it as favourite and a check mark appears press OK again to cancel the mark Do so to create your favourite music list then music play goes among these favourites To quickly select unselect all files inside this folder move the cursor to its volume row first row and press OK then choose Select or UnSelect Playing movie Generally video playback supports MPG MPEG MP4 TS TRP M4V RM RMVB formats but for the sake of technical updating some formats above may not be supported Be yp PHOTO MUSIC TEXT Page 1 1 To watch movie MSTPVR From the USB main menu press 4 or to select MOVIE menu and press OK to access TITANIC ts 2012 mov Press to navigate among your files or folders 3 Press to play the selected movie full screen or E sack enter sevect Mv PLAYIPAUSE press OK to access the folder to select your desired movie to play Using USB Multi Media Player continued Playing movie continued During movie play you can press Play pause e u Stop playing Fast forward PHOTO MUSIC TEXT Fast reverse Page 1 1 Subtitle Shows subtitle ifavailable STEREO Selects audio track if available MSTPVR EXIT Exit movie play Exit and return to USB main menu Size 101 MBytes A ar AACR When USB main menu is on the screen you can press one or more times to select a
36. g message will pop up elf no disk space left a warning will pop up and the recording stops C Be sure to press OK button again to save the timer D Repeat the above steps if you want to schedule more program recording Note that only one program can be recorded at the same time 32 Making use of PVR recording function Continued AA digital only When you have scheduled future program recording through EPG A window successfully you can call out the RECORDER LIST to know Editing Recorder List your schedule list Also you can delete some unwanted recording schedule from the window 22 Sep 2011 10 50 RECORDER LIST From EPG RECORDER pressing EPG then BLUE button to Title StartDate Date Ro Pu TU TL Mode access window press YELLOW button to call out the RECORDERLIST nv 2011 09 22 20 10 2011 09 22 21 30 2 ABC TV Sydney Once 2 If you want to cancel some schedule press or w to select the BEEN programme event then press RED button to delete it ER AET E 3 Toreturnto EPG window press YELLOW button To go back to EPG RECORDER window to edit the selected item press GREEN button To directly close the menu press EXIT Playing back the recorded contents When your scheduled programs have been recorded onto your connected external memory device the TV can show the Recorded List From the list you can select program you want to play back In addition you can sort the list by y
37. gn the stand with the TV by moving the stand steadily until the Stand Locators align with the locating grooves on the stand And align the M5 screws screw holes on the TV with the holes in the stand then secure the stand to the TV with provided screws To remove the stand from the TV perform these steps in reverse order NOTE The appearance of this product in these illustrations may differ from your actual product and is for comparative purposes only Preparations Continued Using the Remote Control Selecting a location You should selecta location for the TV Where direct light does not reflect on the screen e That has indirect and soft lighting eWhere the TV has access to an antenna or cable TV connection eWhere the TV hasaccess to a power outlet Note Watching TV in total darkness or with a reflection on the screen may cause eyestrain Installing remote control Batteries Openthe battery cover 2 Insert two AAA batteries into the battery compartment Make sure that the and symbols on the batteries match the and symbols in the battery compartment 3 Replace the cover Battery precautions Improper use of batteries can result in a leakage of chemicals and or explosion Be sure to follow the instructions below Place batteries with their terminals corresponding to the and indications e Different types of batteries have different characteristics Do not mix bat
38. grams The program content will be recorded ina digital format onto an external memory device such as USB device memory card or other mass storage device Below all operations in this section reguire the external memory device be connected with the TV Otherwise the operation can not be done Before proceeding please pay attention to the following notes e Before PVR recording you need to check the external memory device s File System successfully e Do not disconnect the memory device from the TV while recording or the data will be lost e During recording a directory will be automatically created at the external memory device to temporarily save the data e The recorded contents cannot be played on any other product or computer it also can not be played on the TV through the USB input source Important Copyright Information Unauthorized use copying distribution broadcasting public performance lending or revision of the recorded TV programs are prohibited Please refer to your local area copyright laws for more details e The recorder once in time shift mode will continue recording what you are watching and overwrite any information already on the memory device e If malfunction then information already on the memory device may lose So please back up your memory device data e When Time Shifting the external memory device need to write and read data simultaneously So during the process it may occur slight picture sound p
39. he instructions that came with the cloth carefully identification e Controls Main Unit Front View Side View B Back View 2 49 AGIN Remote sensor Receives signals from the remote control Do not block Power indicator Lights blue when in operating mode Lights red when in standby mode 3 Power Switch Press these two buttons to directly change the TV channel In menu operations these buttons serve as up down buttons VOL Press the VOL or VOL button to directly increase or decrease the sound volume level In menu operations these buttons serve as right left buttons MENU Press this button to access the main menu screen SOURCE To access Input Source menu POWER Press this button to turn the unit ON from STANDBY mode Press it again to turn the set back to STANDBY Headphone Connect headphones to this jack 2 USB port Connect a USB device to this port 3 HDMI3 Connect an HDMI device to this jack 4 AV2 INPUT Connect an AV device to these jacks 5 S PDIF Connect a digital sound system to this jack 6 HDMI I HDMI2 Connect HDMI devices to these jacks 7 PCIN D SUB AUDIO Connecta computer to these jacks 8 COMPONENT IN 1 2 Connect component video devices to these jacks 9 AVI INPUT Connect an AV device to these jacks 10 AV OUTPUT Conn
40. ices are added All current channels and settings e g locked channels will be lost Note As new services are broadcast it will be necessary to retune the TV in order to view them Auto Tuning DTV Manual Tuning ATV Manual Tuning Goto Input Source menu and select ATV or DTV first Programme Edit Aste Press MENU Press lt or gt to select CHANNEL menu press v to access OED SELECT MOVE MENU RETURN Highlight Auto Tuning item and press or OK to access Now a pop up screen opens with Australia as default country and Start is highlighted Now simply press OK to begin the auto tuning If you want to cancel press to select Cancel and press OK All ATV DTV channels available in your area will be searched and stored into memory Please wait until the searching is complete During the process if you want to skip press MENU To exit OO SELECT AG MOVE WENU RETURN searching press EXIT This feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known In CHANNEL menu press v or to select DTV Manual Tuning then press gt or OK to access Auto Tuning DTV Manual Tuning ATV Manual Tuning Programme Edit File System Highlight UHF CH item press 4 orb button to select your desired multiplex number Press OK to begin the search for that multiplex At the bottom of the menu screen the DTV Signal strength bar is displayed You can make use of
41. ift function is the recording of live programme to an external memory device to be viewed at a later time more convenient to the user With the miracle of Time Shift you can pause rewind and replay live TV by temporarily saving a programme onto the connected external memory device After successful PVR File System check you can use Time Shift function now Press T SHIFT button to start time shifting The live programme stops at the current state At the bottom screen a control bar will appear for your help After some seconds this control bar will be minimized in size and glitter on the screen To restore please press OK During the process you can press Current time u PLAY PAUSE button A w 11 10 STOP button s 00 00 06 00 20 00 lt lt Fast forward rewind 1 lt amp Goto previous next by 30 seconds in time period Play Pause Stp GJ Rew WF C Prev Next Duration 33 Teletext amp Subtitle Teletext amp Subtitle Q FREEZE TV RADIO S MODE FAV LIST 2 ASPECT MENU T SHIFT 1 W TTX Subtitle Hold Size Index Mix SOURCE STEREO P MODE A Vv REC LIST Reveal Update What Is Teletext Your System receives Teletext signals broadcast by a TV network and decodes them into graphical format for viewing News weather and sports information stock exchange prices and programme previews are among the many services av
42. ion cabinet creaks During the timing of USB device detection i e when the TV is turned on with USB device connected or when you plug in USB device during TV working the TV may not act by remote control buttons in such case Wait some time then itis OK Remote control command is not effect in some cases Disconnect the power cord and wait for a few seconds Then re plug Control buttons do not operate the power cord and turn on the unit again When you push POWER SWITCH to power on the TV in about 3 POWER button responds slowly seconds the POWER button starts to respond after pressed after power is connected 38 Specifications Integrated Digtal TV Analogue TV system PAL B G CCIR NTSC AV Digital TV system Compliant Standard DVB T 7 MHz Bandwidth Video Decoding MP ML amp MP HL Audio Decoding Dolby Digital MPEG I amp II Audio Sampling Rate 32 44 1 48 kHz Dimensions W x H x 646 W x 459 H x 255 D mm stand included 646 W x 425 H x 98 D mm stand not included Weight 8 5 kg stand included 7 5 kg stand not included Terminals Antenna in 1 AV in 2 COMPONENT in 2 PC in 1 HDMI in 3 USB port 1 RS 232 1 Headphone 1 AV out 1 S PDIF out 1 Note Design and specifications are subject to change without notice 2 Weight and dimensions shown are approximate 3 Specifications and external appearance may be changed for the sake of
43. ly assigned and cannot be changed by user Programme Edit continued Setting up a favourite channel list You can create a favourite channel list so you can quickly browse through your favourite channels by pressing FAV LIST then selecting a channel from the favourite channel list Navigate to the CHANNEL menu press gt to select Auto Tuning Programme Edit press gt or OK to open the Programme DTV Manual Tuning Edit menu ATV Manual Tuning Programme Edit Use vor to select your favourite program use FAV LIST File System button to mark the selected programme as favourite a favourite symbol appears To cancel the favourite mark just press FAV LIST button again and the symbol disappears If the programme list has more than one page you can press v or 4 to scroll the page OQO SELECT AY MOVE MENU RETURN Favourite List v 22 ABC TV Repeat the above steps to set more favorite programs v 350 CH1 v 353 CH4 v 1 S 03 v 2 C 42 v 4 C 04 Press EXIT button to close the menu Now you can press FAV LIST button to display the favorite list press wor to browse through the favorite programs and press OK to access the channel AG Move Select Reorder rearrange channels ATV channels can be arranged in your favourite order analogue only Navigate to the CHANNEL menu press gt to select Programme Edit press or OK to open the Programme Edit menu Auto Tuning DTV Manual Tuning ATV Manual T
44. mme name start and end play times Next programme name and start and end play times TV or Radio Audio mode audio track Signal strength for current channel Note Signal resolution e The above OSD is only served as an example and it is Subtitle teletext availability in DTV mode Video format of the current programme SD HD Information banner content varies depending on the Parental rating G PG M MA etc broadcaster and your settings MEM Using the EPG digital only The Electronic Programme Guide EPG makes it possible for users to see details about the programme they are watching other programmes and even a schedule of the next 7 days if 2 ABC TV Sydney available The information available includes the number and British Isles A Natural History name of the channel the name of programme the start and end time and a summary Thus viewers can easily get 22 Sep 08 47 09 05 information about future programmes 22 Sep 09 05 10 00 Designers Agriculture 22 Sep 10 00 10 32 Midday Report To use EPG 22 Sep 10 32 11 31 22 Sep 11 31 12 03 Behaving Badly Press the EPG button to open the EPG In the EPG 22 Sep 12 03 12 33 The Lenny Henry Show window as shown on the left current channels now and upcoming program s information will be displayed e 2 At upper screen the channel number name is shown you can use 4 orb to select a channel whose information you want to know At
45. n To connect headphones Insertthe plug ofthe headphone into the TV s Headphone jack When using headphones adjust the headphone volume so as to avoid excessive levels as hearing damage may result VIDEO L AUDIO R Headphones USB connection Insert your USB device into the USB port To play from the USB device Turn on your TV then press SOURCE button The Input Source menu opens VIDEO L AUDIO R 2 Press or v to select USB then press OK to confirm Never remove the USB device or turn off the TV while using the USB device For a full Home Theater sound experience you must connect your digital sound system to the S PDIF OUT Mini TOSLINK jack on the TV Digital audio cable S PDIF IN 12 Making Connections Continued HDMI device connection TV REAR DVD Player etc Component cables often have red green and blue color coded video connectors and red and white audio connectors Match the colors when making connections Y G R GIP Y GJR L COMPONENT IN To monitor port 15 pin D Sub Audio cable To audio output jack How to connect an HDMI device Connect the HDMI cable between the HDMI jack on the TV HDMII and HDMI2 located at TV rear while HDMI3 at TV side and HDMI output jack on the device Note If your device has an HDMI connection we recommend you use that to get the
46. ng operations T A Mode select From RECORDER menu highlight Mode item use 4 select a recording mode Once recording once Every Day recording everyday Weekly Prev Day Next Day REC recording weekly or AUTO automatically record your selected program event can be selected EPG 22 Sep 2011 09 00 B If you set Mode to Once or Every Day or Weekly you can RECORDER set Start Time and End Time freely Programme 2 Parkinson e Start Time Highlight Start Time then press gt to open its pop up menu Press v or 4 to select Year Month Date 22 Sep 2011 10 32 Hour Minute item use 4 or gt to adjust the setting When finished highlight Close and press OK Start Time End Time 22 sep 2011 11 31 e End Time Highlight End Time then press gt to open its pop up menu Press v or to select Year Month Date OO Select OO Move OSchedule ORETURN ox Hour Minute item use 4 or gt to adjust the setting When finished highlight Close and press OK Note Future program recording can be done in standby mode During recording in standby the backlight is off while the Indicator turns blue to remind you that the set is at recording Pressing POWER button can turn on the backlight Once the timer reached this program will be recorded and During recording do not change channel or source stored at the connected external memory device If you do want to change channel or source a remindin
47. o start 2 Now a dialogue box appears prompting you to start to create disk partition Highlight Start and press OK to proceed to format the disk all data will be lost Or select Exit to abandon and exit If your disk file system is FAT32 then it is unnecessary to format the disk and the TV starts to check the disk speed directly 3 Now File System Size screen pops up with PVR File System Type highlighted Hi Speed FS select for high recording speed and FAT32 can be selected with 4 orb button Note If Hi Speed FS is choosed it will occupy disk space based on your PVR File System Size setting while FAT32 will not elf Hi Speed FS is choosed then press to highlight PWR File System Size use 4 or to select a size the greater the size the longer you can make recording The next line will show the recording time allowed for example if shows SD 294 Mins HD 84 Mins that means recording SD programs can last 294 minutes while for HD programs only 84 minutes is allowed at your disk Then highlight OK and press OK to start formatting the disk The format may take several minutes please wait When finished Time Shift Size setting screen will pop up elf FAT32 is choosed then PVR File System Size can not be set The screen will show the recording time allowed Highlight OK and press OK to start formatting the disk The format may take several minutes please wait When finished itstarts to check disk speed 4 Afte
48. our preference obtain more information about the program event or delete some unwanted programmes Recorded List Programme Press REC LIST button to open the Recorded List e f you want to sort the program list by your preference press Index button one or more times to select different order by Olympics channel number by time or by program title alphabetical order and the programmes are automatically sorted in this order e f you want to delete some unwanted programmes press 4 or v to select then press RED button e f you want to obtain more program information such as Date Time Duration Program Name Channel Name press or v to select your desired program then press b button To Te NN VEM Index MET close the information press 4 button amp INFO EXIT IS DEL 2 If you want to play back some recorded programme press 4 or v to select then press OK to start playing Current time Broadcasting time During playing back you can press Playback 21 56 gt P 00 00 17 00 01 43 u PLAY PAUSE button NE e A B repeat button During play you can pause and repeat any 3 specified section simply by pressing this button at the starting and Program name Duration ending points To cancel press this button once again Channel name PP 44 Fast forward rewind m Ti hift 44 gt PI Go to previous next by 30 seconds in time period Ime sni Time Sh
49. r you choosed Hi Speed FS and set size and the format is finished the Time Shift Size screen pops up Use 4 or gt to set Time Shift size for time shifting the time shift size ranges from 512MB to 8GB but is within PVRFile System Size you have set above The greater the size the longer the duration allowed for time shifting then highlight OK and press OK to proceed to check disk speed Checking speed may take several minutes please wait When finished if SUCCESS appears at the Check PVR File System line then you can start PVRrecording function At File System menu bottom screen USB Disk state and speed information will appear they can not be adjusted Note After PVR File System checking if SD Fail appears on the screen that indicates this external memory device is not suitable to be used for recording please replace with other one and try it again If SD Support appears that means this external device is suitable to record SD program but not HD program If HD Support appears then both SD and HD programs are OK File System Record Time 6Hr Select Disk C Check PVR File System SUCCESS ExT EXIT menu Return GG Move COE Select 31 Making use of PVR recording function Continued digital only You can record DTV programs in two ways instant recording and timer recording Instant recording current program recording To record a programme instantly
50. rams if the clock is not set you may set the Sleep Timer Off clock manually Auto Sleep Off i INO L NEWACT CATEG x To set OFF timer ON timer you should set the clock first Press MENU Press lt to display TIME menu press v toaccess OY MOVE menu RETURN A For DTV programs you need to select your time zone Press gt or v to select Time Zone use 4 or gt to select your local area time zone Then the clock will be automatically set by the TV signal Month lt Jan source based on the time zone you selected Sleep Timer lt Year lt 2011 Auto Sleep Hour lt Off Time On Time B For ATV programs and the clock is not set press a to select Clock press gt OK to access its setting menu Within the menu use gt to highlight the Date Month Year Hour or Minute item anduse 4 orb to adjust the values When finished use or to select Close and press OK to confirm the setting and close this sub menu Time Zone Close OS SELECT OY MOVE menu RETURN 3 Toclosethe menu press EXIT button Setting OFF timer To set OFF timer You can set OFF timer to switch the TV to standby at a specified time Once you set OFF timer it will effect every 57 PICTURE Press MENU Press or to display TIME menu press v toaccess Activate On 1 00 Press gt to select Off Time press or OK to Minute 00 Auto Sleep access it
51. re Adult Audience May contain Block MA and above mature themes profane language graphic Block AV and above violence and sexual situations AW Adult Audience Strong violence Block R and above No Block R Restricted viewing Not for children under age 17 Strong elements of sex and or violence Press MENU to return to previous menu Press EXIT to close the menu directly Restoring factory default To restore factory default Caution When you restore factory default all settings e n p f IN A ED including password will be cleared and reset to default the Ju m E password is reset to 0000 So make sure you do want to reset the settings to its original factory condition before you perform this operation Navigate to the LOCK menu and input the correct password to access Press or to select the Restore Factory Default item andthen press gt or OK A message appears prompting you to confirm again X SELECT OY MOVE menu RETURN 3 Use 4 or gt toselect between YES to reset or NO to cancel item and press OK to confirm 4 Press MENU to return to previous menu Press EXIT to close the menu directly 29 Making use of PVR recording function A digital only This TV provides PVR personal video recorder recording function which allows the viewer to pause and rewind any DTV program that is time shifting function as well as record and play back selected pro
52. repeat 2012 mov mode You can select repeat to play one 7 movie repeat to play all movies when it ENTER 2 SELECT A1 PLAYIPAUSE reaches end no repeat when it reaches end Also you can press RED button for A B repeat BLUE button for time search so that the play starts from the specific time e A B repeat During play you can pause and repeat any specified section simply by pressing RED button at the starting and ending points To cancel press RED button once again e Time search Press BLUE button to call out Input search time screen then use number buttons to input time use 4 gt to move the cursor and then highlight OK and press OK button for time search and the playback starts from the specific time Pressing INFO button can get time information from the screen Note e When selecting photo or folder from the list you can press 4 gt to scroll the page e When the highlight rest ona file for some seconds its content preview will appear automatically Playing text ying Text play supports TXT format but for the sake of technical updating not all TXT format files can be played 7 PHOTO MUSIC MOVIE Page1 1 To view text MSTPVR From the USB main menu press lt or to select TEXT menu and press OK to access WORD txt 2 Press gt or v tonavigate among files or folders 4 ack OK ENTERS suus gk Press A to open the highlighted file and show it
53. s text or press OK to open the highlighted folder During text playing you can press amp a A signal that reaches beyond the Play the text viewing res CBpuy screen A lt Go to the previous Page 1 1 slight overscan is generally not but pri Go to the next apparent on a computer monitor a v Scrollthe content MSTPVR where taskbars are typically at the extreme ends of the viewing area EXIT Exit text playing Exit and return to USB main menu FOXMAIL txt Note When selecting file or folder from the list BACK OK ENTER 4 SELECT PAN PLAY PAUSE you can press 4 gt to scroll the page Troubleshooting m Troubleshooting guide general If after reading these operating instructions you have additional questions related to the use of your television please call the services center in your local area Before calling service please check the symptoms and follow suggested solutions Possible Solutions The batteries could be weak Replace the batteries Remote control does not operate Check the orientation of the batteries Make sure the power cord is plugged in Make sure the power cord is plugged in Press POWER on the TV or on the remote control Try another channel it could be station trouble Dark poor or no picture Select a proper picture mode Adjust the brightness in the video setting e Check the
54. s EXIT Turning the TV on or off To turn the TV on or off Plug the power cord into an AC power outlet Press Power Switch on the TV Now the set is in standby mode Wait some seconds until the power indicator lights up then press POWER to turn on the TV Be sure to wait some seconds before pressing POWER button If you promptly press POWER button then the TV may not respond or act wrongly Power Switch Press button again to turn off the TV and put the TV in standby mode To cut off the power completely press Power Switch on the O SOURCE TV 2 TV RADIO STEREO Warning When the TV is in standby mode power is still flowing into the TV To save power please press Power Switch to 1 2 3 completely cut off the power After you turn off the TV you should wait at least 5 seconds the power indicator goes out before you turn it on again S MODE FAV LIST P MODE Note If the TV does not receive a broadcast signal for several minutes the TV goes into standby mode automatically 15 Basic Operations Continued Input Source Selection Input Source DTV ATV AV1 AV2 Component1 Component2 D SUB HDMI1 HDMI2 HDMI3 USB AV Move Select To select the input source Press SOURCE button The Input Source list appears 2 Press v or a to select the input source then press OK or to confirm your choice The TV switches to the selected source Programme Selection Channel List 2 ABC TV
55. s on the side of your TV and to the AV IN jacks on the back of the VCR To record a program Turn on your TV then select the programme you want to record 2 Turn on your VCR then inserta videotape 3 Press RECORD on your VCR to start the recording Note Only TV and AV programs can be recorded 14 First Time Configuration Basic Operations Initial setup The first time you use the TV you need to configure your TV To configure your TV Make sure that you have inserted the batteries in the remote control have connected your antenna to the TV properly and have connected the AC power 2 Press the Power Switch on the TV then press POWER to Installation Guide turn on the TV Channel Tuning gt Now the Installation Guide screen appears with Channel Start Exit Tuning highlighted Press OK to begin the auto tuning for all available channels first for ATV then DTV including Radio channels It may take several minutes please wait until it is Channel Tuning finished 2 78 50MHz ATV rT ATV 2 Programme s 0 Programme s When complete it will go to digital programme position one pado i Now channel list has been created and you can start to watch TV During searching the screen will display a report about found stations Press lt Menu gt to skip Press lt Exit gt to exit Note During ATV tuning if you want to skip it and go to DTV tuning press MENU To exit tuning pres
56. s setting menu Time Zone Sleep Timer Close Now the Activate item is highlighted automatically 66 EES AO DUNS GENS RETURN press 4 to select On to turn on the function cancel the function select Off After Activate is set to On press or to select Hour or Minute press 4 or b to adjust the value When finished use 4 or to select Close and press OK to confirm the setting and close this sub menu To close the menu press EXIT button Setting Clock amp Timer Continued Setting Sleep timer To set Sleep timer Sleep timer lets you select the amount of time before your TV ES X re turns itself off automatically This setting is cleared when the TV is turned off OPTION 01 Jan 2011 15 30 Press MENU Press or to display TIME menu Off Time Off On Time Off press O access Sleep Timer Off Auto Sleep Off gt Time Zone lt NSW ACT GMT 10 gt Press or v toselect Sleep Timer Press 4 or b toselect the amount of time to turn off the OO SELECT MOVE GEID RETURN timer please select Off Note After you have set sleep timer when the last 60 seconds comes the Power Off screen will appear to remind you after how many seconds the TV will power off You can press any button to quit Setting Auto Sleep To set Auto Sleep Auto Sleep will bring the TV to standby automatically when A v I al AT A there is no signal input except USB source for a certain 6
57. supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Damage requiring service lf any of the following conditions occurs unplug the power cord from the AC outlet and request a qualified service person to perform repairs a When the power cord or plug is damaged b When aliquid is spilled on the product or when objects have fallen into the product c When the product has been exposed to rain or water d When the product does not operate properly as described in the operating instructions Do not touch the controls other than those described in the operating instructions Improper adjustment of controls not described in the instructions can cause damage which often requires extensive adjustment work by a qualified technician e Ifthe product has been dropped or the cabinet has been damaged in any way f When the product displays an abnormal condition or exhibits a distinct change in performance Any noticeable abnormality in the product indicates that the product needs servicing 12 Replacement parts In case the product needs replacement parts make sure that the service person uses replacement parts specified by the manufacturer or those with the same characteristics and performance as the original parts Use of unauthorized parts can result in fire electric shock and or other danger
58. teries of different types e Do not mix old and new batteries Mixing old and new batteries can shorten the life of new batteries and or cause old batteries to leak chemicals e Remove batteries as soon as they are non operable Chemicals that leak from batteries can cause a rash If chemical leakage is found wipe with a cloth Dispose of batteries ina proper manner e f the remote control is not used for an extended period of time remove the batteries e The batteries shall not be exposed to excessive heat such as sunshine fire or the like Aiming the remote control Use the remote control by pointing it towards the remote sensor on the front of your TV Objects between the remote control and the remote sensor may prevent proper operation Cautions regarding use of remote control eDo not expose the remote control to shock In addition do not expose the remote control to liquids and do not place in an area with high humidity eDo not install or place the remote control under direct sunlight The heat may cause deformation of the unit e The remote control may not work properly if the remote sensor window of the main unit is under direct sunlight or strong lighting In such a case change the angle of the lighting or the TV set or operate the remote control closer to the remote sensor window 10 Making Connections Before you make any connections Cautions Before Connecting e When connecting an external de
59. the television to a suitable support e Not standing the televisions on cloth or other materials placed between the television and supporting furniture e Educating children about the dangers of climbing on furniture to reach the television or its controls Warning To prevent the spread of fire keep candles or other open flames away from this product at all times Important Safety Precautions Electrical energy can perform many useful functions but it can also cause personal injuries and property damage if improperly handled This product has been engineered and manufactured with the highest priority on safety But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD In order to prevent potential danger please observe the following instructions when installing operating and cleaning the product To ensure your safety and prolong the service life of your TV product please read the following precautions carefully before using the product 1 Read these instructions All operating instructions must be read and understood before the product is operated 2 Keep these instructions These safety and operating instructions must be kept in a safe place for future reference 3 Heed all warnings All warnings on the product and in the instructions must be observed closely 4 Follow all instructions All operating instructions must be followed 5 Attachments Only use attachments accessories specified by the manuf
60. to select Close item and press OK to close the sub menu Press EXIT button to close the main menu Press to switch the TV to standby mode At the preset time the TV will auto turn on and broadcast the preset programme at the preset volume Setting Child and Rating Locks You can prevent your children from watching TV by locking the TV and using age ratings To enable child lock and rating feature you must set Lock System to On through LOCK menu Also you can set Lock System to On to lock auto tuning manual tuning to protect some TV settings from being accidentally changed To cancel child and rating lock you can directly set Lock System to Off Setting or changing the child lock password To set or change the child lock password From LOCK menu you can set a new child lock password or to change an existing child lock password By default the password is 0000 and you should change it To access LOCK menu to lock or unlock channels to view locked channels etc the child lock password is required Parental Press MENU Press 4 orb to display LOCK menu press to access Restore F Now a password is required to input Use number buttons to input the correct password the default password is 0000 OCS SELECT AO MOVE MENU RETURN e 52 X 226 Press orv to select Set Password and then press b or Wc E bod OK button to access its submenu PICTURE Lock Sys Set Pass Block Pro Parental Use the number b
61. u highlight Select Disk press to access Use 4 or gt to select a disk then move the highlight to OK box and press OK to confirm To cancel select EXIT to exit Instructions continue on the next page 30 Making use of PVR recording function Continued A digital only File System Record Time lt 6Hr gt Select Disk lt Cc gt Check PVR File System Start EWT EXIT wENU Return GG Move OO Select wv File System Record Time Sele Che Create partition Create disk partition Warning All data will be lost Cex EXIT meny Return O Move COE Select File System Record Time Sele 4 Chet File System Size PVR File System Type Hi Speed FS PVR File System Size All SD 294 Mins HD 84 Mins Cex EXIT wENU Return OGG Move OO Select File System Record Time Sele E Che Format Disk Do not unplug USB device Create PVR file system please wait CExT EXIT wENU Return GG Move CE Select File System Record Time Sele Che Time Shift Size Time Shift Disk Size 5 GB SD 80 Mins HD 25 Mins CExT EXIT wENU Return GG Move COE Select File System Record Time 6Hr Select Disk gt Check PVR File System Checking EWT EXIT Return GG Move COE Select C Check PVRFile System From File System menu highlight Check PVR File System press OK t
62. uning Programme Edit Use or to select a channel you want to move File System Press YELLOW button and a move symbol appears alongside the selected channel in the list then use or to move the channel upward or downward to a desired new position Press YELLOW button again to finish the moving SELECT GG MOVE MENU RETURN Programme Edit sina Repeat the above steps to move more programs 2 C 42 3 5 04 4 C 04 Note f the Programme Edit menu has more than one page you may press or v to scroll the page upward or downward The order of the DTV channels is automatically assigned and cannot be changed by user Programme Edit Continued Skipping channels Auto Tuning DTV Manual Tuning ATV Manual Tuning Programme Edit File System SELECT AY MOVE MENU RETURN Programme Edit 1 S 03 2 C 42 3 S 04 4 C 04 Deleting channels Auto Tuning DTV Manual Tuning ATV Manual Tuning Programme Edit File System SELECT AY MOVE MENU RETURN Programme Edit 1 S 03 2 C 42 3 S 04 4 C 04 You can skip unnecessary channels so that only the channels you want to watch can be selected by CH 4 CH You can still tune to the skipped channel by using the number buttons 4 Navigate to the CHANNEL menu press or to select Programme Edit press or OK to open the Programme Edit menu Press vora to select your unwanted channel press BLUE button and a skip symbol appears
63. uttons to input a new password 4 digit Inputthe new password again Now the new password has been created successfully Restore F A a Note Be sure to write down your password and retain it for future use If you do forget the password the unit provides a super password 2580 Please DO NOT let your children know the super password OCS SELECT MOVE RETURN Locking the TV programmes To lock or unlock the TV programmes Locking the TV programs prevents your children from viewing any channels which you do not want them to watch To use lock A ad ZO UC we feature you have to enable the Lock System PICTURE Navigate to the LOCK menu and input the correct password Lock System to access Set Password Block Programme Now the Lock System item will be highlighted automatically Mo Bs Use 4 or gt to select On to enable the lock system Parental Guidance Restore Factory Default Use or v to highlight Block Programme item press gt or OKto access SELECT MOVE menu RETURN Now the Block Programme screen opens with a programme list displayed Use select the programme you want to lock then press GREEN button to set lock to it A lock symbol appears alongside To unlock press GREEN button again Select other programs and press GREEN button to set lock to them Block Programme 2 ABC TV Sydney 20 ABC HDTV 21 ABC2 22 ABC TV 350 CH1 35
64. vice to the TV make sure that the TV and the device are turned off e Check the plugs on the ends of cables to make sure that they are the correct type before you try plugging them into jacks on the TV e Make sure that all plugs are securely inserted into the jacks Loose connections can result in image or color problems e The illustration of the external device may be different depending on your model e Refer to the operating manual of the external device as well Antenna connection eConnect one end of your antenna cable to the RF jack on the back of the TV then connect the other end of the cable to the antenna wall jack Note UNS NN e lt is recommended that the 75 coaxial cable be used to eliminate m ua 5 interference and noise which may occur due to radio wave conditions e antenna cable should not be bundled with the power cord and the like 75 ohm coaxial cable round cable e If the antenna is not installed properly contact your dealer for assistance Power connection Connect the power cord to a power outlet Household power outlet Note e This product should be operated only from the type of power source indicated on the marking label e Always unplug the AC cord from power outlet when not using for a long period of time e This illustration is for reference only The AC plug may be different on different models Making Connections Continued Headphone connectio
Download Pdf Manuals
Related Search