Olivetti L230 User's Manual
Contents
1. Symptom Check Items Corrective Action Print quality is not good Refer to Print Quality Problems on page 4 3 Paper is jammed Refer to Clearing Paper Jams on page 4 11 Nothing lights on the operation Check that the power cord is Turn off the printer s power plug in panel even when power is turned properly plugged into the power the power cord securely and try on and the fan makes no noise outlet turning on the printer s power again Check that the power switch is Set the power switch to the On in the On position position The printer prints a status page Check the printer cable or the Connect both ends of the printer but does not print jobs from the interface cable cable securely Try replacing the computer printer cable or the interface cable Check program files and Try printing another file or using application software another print command If the problem occurs only with a specific file or application check the printer driver settings for that application Tips Printer problems may be solved easily by following the tips below When you have encountered a problem that following the above guidelines will not solve try the following e Turn the printer power off and wait for several seconds Then turn on the printer e Reboot the computer which sends the print jobs to the printer e Obtain and use the latest version of the printer driver The latest versions of printer drivers and utilities are av2. PG L230 PG L235 PG L245 Operation Guide PUBLICATION ISSUED BY Olivetti S p A Gruppo Telecom Italia Via Jervis 77 10015 Ivrea ITALY www olivetti com Copyright 2007 Olivetti All rights reserved The mark affixed to the product certifies that the product satisfies the basic quality requirements September 2007 The manufacturer reserves the right to carry out modifications to the product described in this manual at any time and without any notice ENERGY STAR is a U S registered mark The ENERGY STAR program is an energy reduction plan introduced by the United States Environmental Protection Agency in response to environmental issues and for the purpose of advancing the development and utilization of more energy efficient office equipment Your attention is drawn to the following actions which could compromise the conformity attested to above as well as the characteristics of the product e incorrect electrical power supply e incorrect installation incorrect or improper use or use not in compliance with the warnings provided in the User s Manual supplied with the product e replacement of original components or accessories with others of a type not approved by the manufacturer or performed by unauthorised personnel Contents Legal and Safety Information 1 Machine Parts Components at the Front of the Printer 0 0 ee 1 2 Components at the Left of the Printer and Interna
3. MP tray optional paper feeders or optional envelope feeder PG L235 L245 This message is displayed alternately with messages indicating the printer status such as Ready Please wait Processing Waiting and FormFeed Time Out Pal Sere ee F represents a controller error 0 1 2 Call for service The printer does Peed not operate when this message is displayed Call 1 aE represents a mechanical error 0 1 2 Call for service The printer 4444 0123456 does not operate when this message is displayed The total number of pages printed is also indicated e g 0123456 Cassette d The corresponding paper cassette is not installed Install the cassette The not loaded cassette number can be 1 topmost to 4 bottom PG L230 1 and 2 Sheek wente This message warns following two cases Install the new waste toner box toner box The waste toner box is not installed The waste toner box is full Clean printer Please clean the inside of the printer Refer to Cleaning the Printer on page 3 8 Press GO This message will be displayed when replacing the toner container after the message Replace toner is displayed After cleaning the inside of the printer press GO and the printer will be ready for printing o ea The left cover of the printer is open Close the left cover left cover Close The rear unit of the printer is open Close the printer rear unit rear unit The top cover of the printer is open
4. Close the printer top cover top cover Duplex disabled You attempted to print with a paper size and paper type that cannot be used for Press GO duplex printing Press GO to print onto one side of the paper only OPERATION GUIDE gig Troubleshooting Message Corrective Action ee ee The e MPS job cannot be stored because RAM disk is disabled RAM disk size is Press GO insufficient Microdrive is not installed or Microdrive is full Press GO to print error report aa Ponce Gee Turn the power switch off and then back on again If this message still remains turn reas the power switch off and contact your service representative or authorized service center pis Hee Conn You have attempted to print a job that is not contained in the specified virtual Press GO mailbox or the specified virtual mailbox is not found If Auto Error Clear is set to On printing will be automatically resumed after a preset period of time et error The Microdrive installed in the printer is not formatted and therefore cannot be Hard disk read or written Tornat eee The CompactFlash card inserted in the printer is not formatted and therefore Memory card cannot be read or written Hard aiok err ae A Microdrive error has occurred Look at the error code given in place of and Press GO refer to Storage Error Codes on page 4 9 To ignore the Microdrive error press GO I F occupied This message is displayed when you attempt to use the printer s operat
5. Oficio2 Custom 105 x 148 to 216 x 356 mm 4 1 8 x 5 13 16 to 8 1 2 x 148 x 210 to 216 x 356 14 mm 5 13 16 x 8 1 4 to 8 1 2 x 14 A4 A5 B5 A6 Letter A4 A5 B5 A6 Letter Legal Folio Oficio2 Custom Legal Folio Oficio2 70 x 148 to 216 x 356 mm 2 3 4 x 5 13 16 to 8 1 2 x Custom 70 x 148 to 216 14 x 356 mm 2 3 4 x 5 13 16 to 8 1 2 x 14 Paper Types Cassette Plain Preprinted Bond Recycled Rough Letterhead Color Prepunched High quality and Custom MP Tray Plain Transparency Preprinted Labels Bond Recycled Vellum Rough Letterhead Color Prepunched Envelope Cardstock Thick High quality and Custom Paper Feed Source Capacity Cassette 500 sheets 80g m MP Tray 100 sheets 80g m Output Tray Capacity Top Tray 250 sheets 80g m 500 sheets 80g m Face up Tray Option PT 310 250 sheets 80g m OPERATION GUIDE 5 1 Specifications Description PG L230 PG L235 PG L245 Warm up Time 23 C 50 RH Power on 13 seconds or less 15 seconds or less 17 seconds or less Sleep 10 seconds or less 15 seconds or less 15 seconds or less First Print Out A4 19 seconds or less 25 5 seconds or less 24 seconds or less Fine1200 Fast1200 600dpi 300dpi Monthly Duty Average 4 000 pages 8 000 pages 12 000 pages Maximum 150 000 pages 200 000 pages 290 000 pages Operating Systems Microsoft Windows 2000 XP Vista Microsoft Windows Server 2003 Apple Macin
6. Technology OPERATION GUIDE In some countries the radio tag technology used in this equipment to identify the toner container may be subject to authorization and the use of this equipment may consequently be restricted Caution Labels The printer bears any of the following labels Label inside the printer PAER c ASS gB ISFA BARUTO RYEN OPEN qi ATTENTION CLASE 3B RAYONNEMENT LASER EN CAS D OUVERTURE Laser rad ati on warnin g EXPOSITION DANGEREUSE AU FAISCEAU VORSICHT KLASSE 3B LASERSTRAHLUNG WENN ABDECKUNG GE FFNET NICHT DEM STRAHL AUSSETZEN ATTENZIONE CLASSE 3B RADIAZIONE LASER IN CASO DI APERTURA EVITARE L ESPOSIZIONE AL FASCIO PRECAUCION CLASSE 3B RADIACIONE LASER CUANDO SE ABRE EVITAR EXPONERSE AL RAYO VARO AVATTAESSA OLET ALTTIINA LUOKAN 3B LASERS TEILYLLE ALA KATSO SATEESEEN FRY TIRE A 3B3 ATL ACCS MERCER PBS 3 BA A Rah ike PASE CLASS 3B 74 ol SAR AW Hl ofa BS COAN OANBTSISA 3 BL V HD MHEN TWEET L PH E SENBUESICLT CEL CAUTION ACHTUNG ATTENTION HOT SURFACE HEISSE OBERFLACHE TEMP RATURE LEV E ATTENCION ATTENZIONE EXTERIOR CALIENTE SUPERF CIE CHE SCOTIA A ie 7O 1p E EI For Europe Asia and other countries 220 240V olivetti 50 60Hz 4 3A PG L245 Olivetti S p A e Apparatet m tilkoples jordet stikkontakt Apparaten skall anslutas till jordat uttag Laite on liitett v suojamaadoituskosk ettimilla varustettuun
7. You can print a status page to check how much toner remains in the toner container The Toner Gauge in the consumables status section on the status page shows a progress bar which roughly represents how much toner is left in the toner container Starter Toner Container The toner container packed with the new printer is a starter toner container The starter toner container lasts an average of 10 000 pages PG L245 7 500 pages PG L235 6 000 pages PG L230 Toner Kits For best results we recommend that you only use genuine Olivetti Parts and Supplies A new toner kit contains the following items e Toner Container e Plastic waste bags for old toner container and old waste toner box e Waste toner box e Installation Guide NOTE Do not remove the toner container from the carton until you are ready to install it in the printer Understanding Messages Requesting Toner Container Replacement OPERATION GUIDE The printer displays messages at two stages of toner usage This message is automatically alternated with the other printer message such as Ready e When the printer becomes low on toner the printer displays the message Toner low as the first caution Note the replacement is not always necessary at this stage e If you ignore the above message and continue printing the printer displays the message Replace toner just before the toner is used up The toner container must be replaced immediately After the clean
8. below When the box is set correctly it will snap into place 6 Make sure that the waste toner box is correctly inserted and close the left cover After replacing the toner containers and the waste toner box clean the internal parts For instructions refer to Cleaning the Printer on page 3 8 Cleaning the Printer To avoid print quality problems the interior of the printer must be cleaned 1 Open the top cover and MP tray 3 8 OPERATION GUIDE Maintenance 2 Lift the developer unit together with the toner container out of the printer 3 Use a lint free cloth to clean dust and dirt away from the registration roller metal OPERATION GUIDE 3 9 Maintenance 4 Insert the developer unit together with the toner container back into the machine 6 Close the top cover and MP tray 3 10 OPERATION GUIDE OPERATION GUIDE 4 Troubleshooting This chapter contains explanations on the following topics G n ral CUISINES socotea simi ca iei it it pin 4 2 e Print Quality Problems eee 4 3 Re Ea lt PRR RR PRIN enna 4 5 e Clearing Paper JANIS casei stii cad at bl 4 11 If a problem cannot be corrected contact your service technician 4 1 Troubleshooting General Guidelines The table below provides basic solutions for problems you may encounter with the printer We suggest you consult this table to troubleshoot the problems before calling for service
9. container N L 6 Remove the label from the toner container OPERATION GUIDE 3 5 Maintenance 7 8 Set the new toner container in the printer and push down on the top of the toner container to install it firmly in place as shown in the figure below PUSH HERE CORRS Close the top cover Proceed to the next section Replacing the Waste Toner Box 3 6 When replacing the toner container the used waste toner box in the printer should also be replaced with the new one from the new toner kit A new waste toner box is included with the toner kit The printer will not operate without replacing the waste toner box Open the left cover While holding the waste toner box press the lock lever and then gently remove the waste toner box Lock Lever NOTE Remove the waste toner box as gently as possible so as not to scatter the toner inside Do not let the opening of the waste toner box face downward OPERATION GUIDE OPERATION GUIDE Maintenance 2 Close the cap to the old waste toner box after removing the box from the printer Old Waste Toner Box To prevent toner from spilling put the old waste toner box in the plastic bag contained in the toner kit and discard it later according to the local code or regulations for waste disposal Plastic Bag 4 Open the cap of the new waste toner box New Waste Toner Box 9 Maintenance 5 Insert the new waste toner box as shown in the figure
10. it Torn pieces of paper are difficult to remove and may be easily overlooked deterring the jam recovery e lf paper jams occur frequently try using a different type of paper replace the paper with paper from another ream flip the paper stack over or rotate the paper stack 180 degrees The printer may have problems if paper jams recur after the paper was replaced e Whether or not the jammed pages are reproduced normally after printing is resumed depends on the location of the paper jam Utilizing Online Help Messages Online help messages are available in the printer s message display to provide simple instructions for clearing jams Press W when the paper jam message has appeared Then a help message will appear to facilitate jam clearing in the location 412000 OPERATION GUIDE Troubleshooting MP Tray Paper is jammed at the MP tray Remove the jammed paper using the procedure given below 1 Remove the paper jammed at the MP tray 2 Open and close the top cover to clear the error Paper Cassette 1 Pull out the paper cassette 2 Remove any partially fed paper Check to see if paper is loaded correctly If not reload the paper 3 Push the paper cassette back in firmly The printer warms up and resumes printing OPERATION GUIDE 4 13 Troubleshooting Duplexer Paper is jammed in the duplex section Remove the jammed paper using the procedure given below injury A CAUTION Do not touch parts i
11. original and all whole or partial copies of it including modified copies or portions merged into other programs IBM retains title to the Programs IBM owns or has licensed from the owner copyrights in the Programs 1 License Under this license you may use the Programs only with the device on which they are installed and transfer possession of the Programs and the device to another party If you transfer the Programs you must transfer a copy of this license and any other documentation to the other party Your license is then terminated The other party agrees to these terms and conditions by its first use of the Program You may not 1 use copy modify merge or transfer copies of the Program except as provided in this license 2 reverse assemble or reverse compile the Program or 3 sublicense rent lease or assign the Program 2 Limited Warranty The Programs are provided AS IS THERE ARE NO OTHER WARRANTIES COVERING THE PROGRAMS OR CONDITIONS EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE vi Some jurisdictions do not allow the exclusion of implied warranties so the above exclusion may not apply to you 3 Limitation of Remedies IBM s entire liability under this license is the following For any claim including fundamental breach in any form related in any way to this license IBM s liability will be for actual damage
12. the user is following the instructions in this guide No responsibility is assumed for defects in the printer s firmware contents of its read only memory This guide any copyrightable subject matter sold or provided with or in connection with the sale of the page printer are protected by copyright All rights are reserved Copying or other reproduction of all or part of this guide any copyrightable subject matter without the prior written consent of Olivetti is prohibited Any copies made of all or part of this guide any copyrightable subject must contain the same copyright notice as the material from which the copying is done Regarding Tradenames PRESCRIBE Is a registered trademark of Kyocera Corporation KPDL is trademark of Kyocera Corporation Hewlett Packard PCL and PJL are registered trademarks of Hewlett Packard Company Centronics is a trade name of Centronics Data Computer Inc PostScript is a registered trademark of Adobe Systems Incorporated Macintosh is a registered trademark of Apple Computer Inc Microsoft Windows and Windows NT are registered trademarks of Microsoft Corporation Microsoft Windows Server is a trademark of Microsoft Corporation PowerPC is a trademark of International Business Machines Corporation Microdrive is a registered trademark of Hitachi Global Storage Technologies Netherlands B V in the US and other countries CompactFlash is a trademark of SanDisk Corporation ENERGY STAR is a U S register
13. 75 I Draft otme Background priro Update Fields Print PostScript over text FENE Manes OCU Popes per pete he i M Update r s T Roversa print order Pont z pages in range Sae topar size No Scale W Aloe Ad fatter papa rgsising Include with documert l Feki codes W Orao choects M Ceris Cpbors for currert document ordy print data only for forme To start printing click OK 2 3 Printing Operation OPERATION GUIDE 3 Maintenance This chapter contains explanations on the following topics e General TOTS ON e seat ia i peer 3 2 e Toner Container Replacement ccccssscccsseeeeesseeeees 3 3 e Cleaning the FATS seamana ceai anti ea 3 8 OPERATION GUIDE 3 7 Maintenance General Information 3 2 This chapter describes basic maintenance tasks you can perform on the printer You can replace the following component according to the printer s display e Toner Kits e Waste Toner Box Also the internal parts need periodic cleaning OPERATION GUIDE Maintenance Toner Container Replacement Frequency of toner container replacement The life of the toner containers depends on the amount of toner required to accomplish your printing jobs Assuming paper of A4 size an average toner coverage of approximately 5 and EcoPrint mode turned off the toner container will need replacing approximately once every 20 000 pages PG L245 15 000 pages PG L235 12 000 pages PG L230
14. IDE DIRECTIVE 2002 96 CE ON THE TREATMENT COLLECTION RECYCLING AND DISPOSAL OF ELECTRIC AND ELECTRONIC DEVICES AND THEIR COMPONENTS INFORMATION 1 FOR COUNTRIES IN THE EUROPEAN UNION EU The disposal of electric and electronic devices as solid urban waste is strictly prohibited it must be collected separately The dumping of these devices at unequipped and unauthorized places may have hazardous effects on health and the environment Offenders will be subjected to the penalties and measures laid down by the law TO DISPOSE OF OUR DEVICES CORRECTLY a Contact the Local Authorities who will give you the practical information you need and the instructions for handling the waste correctly for example location and times of the waste collection centres etc b When you purchase a new device of ours give a used device similar to the one purchased to our dealer for disposal The crossed dustbin symbol on the device means that when it to be disposed of the device is to be taken to the equipped waste collection centres and is to be handled separately from urban waste The producer guarantees the activation of the treatment collection recycling and disposal procedures in _ a accordance with Directive 2002 96 CE and subsequent amendments 2 FOR OTHER COUNTRIES NOT IN THE EU The treatment collection recycling and disposal of electric and electronic devices will be carried out in accordance with the laws in force in the cou
15. NLESS WRITTEN AND SIGNED BY PROPERLY AUTHORIZED REPRESENTATIVES OF EACH PARTY BY OPENING THIS DISKETTE PACKAGE YOU AGREE TO ACCEPT THE TERMS AND CONDITIONS OF THIS AGREEMENT OPERATION GUIDE Safety Information Laser Safety Laser Notice This printer is certified as a Class 1 laser product under the U S Department of Health and Human Services DHHS Radiation Performance Standard according to Radiation Control for Health and Safety Act of 1968 This means that the printer does not produce hazardous laser radiation Since radiation emitted inside the printer is completely confined within protective housings and external covers the laser beam cannot escape from the printer during any phase of user operation This printer is certified in the U S to conform to the requirements of DHHS 21 CFR Subchapter for Class 1 laser products and elsewhere is certified as a Class laser product conforming to the requirements of IEC 825 DANGER CLASS 3B LASER RADIATION WHEN OPEN AVOID DIRECT EXPOSURE TO BEAM CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure Radio Frequency Transmitter This machine contains the transmitter module We the manufacturer hereby declare that this equipment page printer models PG L230 235 245 are in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC Radio Tag
16. New York If you acquired the Program in Canada this license is governed by the laws of the Province of Ontario Otherwise this license is governed by the laws of the country in which you acquired the Program OPERATION GUIDE Typeface Trademark Acknowledgement All resident fonts in this printer are licensed from Monotype Imaging Inc Helvetica Palatino and Times are registered trademarks of Linotype Hell AG ITC Avant Garde Gothic ITC Bookman ITC ZapfChancery and ITC Zapf Dingbats are registered trademarks of International Typeface Corporation Monotype Imaging License Agreement OPERATION GUIDE 1 Software shall mean the digitally encoded machine readable scalable outline data as encoded in a special format as well as the UFST Software You agree to accept a non exclusive license to use the Software to reproduce and display weights styles and versions of letters numerals characters and symbols Typefaces solely for your own customary business or personal purposes at the address stated on the registration card you return to Monotype Imaging Under the terms of this License Agreement you have the right to use the Fonts on up to three printers If you need to have access to the fonts on more than three printers you need to acquire a multi user license agreement which can be obtained from Monotype Imaging Monotype Imaging retains all rights title and interest to the Software and Typefaces and no rights are gran
17. ady and then format VMB Alias error The alias setting was lost or the virtual tray corresponding to the alias does not exist Set the alias again The number of permanent code jobs that can be stored reached the limit value and no more can be saved Either delete some unnecessary jobs etc or increase the limit Is An unreadable page was found in a job The job is damaged o A print job for the specified ID does not exist in the Microdrive CompactFlash Card USB memory Errors ee tn The printer does not support the CompactFlash card inserted The CompactFlash card is not installed 04 The CompactFlash card is full and cannot hold further data Purge unnecessary files or use a new CompactFlash card a specified file is not on the CompactFlash card USB flash memory Insufficient printer memory to support the CompactFlash card system Expand printer memory 4 9 Troubleshooting RAM Disk Errors e e Format error Try turning the power off and on again RAM disk mode is off Turn RAM disk mode On from the operation panel cm No disk space Purge unnecessary files los Specified file is not on disk OC file is not on disk CE e printer memory to support the RAM disk system R printer memory 4 10 OPERATION GUIDE Troubleshooting Clearing Paper Jams If the paper jammed in the paper transport system or no paper sheets were fed at all the Paper jam message appears and the location of the paper ja
18. ailable at http www olivetti com e Make sure that the procedures for printing are correctly followed in the application software Consult the documentation supplied with the application software e Ifthe printer prints garbage characters or stalls when the computer is turned on rename device driver file drvwppat vxd This file may be located in Windows System losubsys or Arcada System folder For technical details visit Microsoft web site for the device driver 4 2 OPERATION GUIDE Troubleshooting Print Quality Problems The tables and diagrams in the following sections define print quality problems and the corrective action you can conduct to solve the problems Some solutions may require cleaning or replacing parts of the printer If the suggested corrective action will not solve the problem call for service Printed Results Corrective Action Completely blank printout Check the toner container Open the top cover and check that the toner container is correctly installed in the printer For more information on installing the toner container refer to Toner Container Replacement on page 3 3 Check that the application software is correctly operated Black or white vertical streaks Check the operation panel for toner Ifthe Toner low message is displayed install a new toner kit To replace the toner container refer to Toner Container A C AB C Replacement on page 3 3 123 123 Check the EcoPrint setting When this
19. ation occurs there is a danger of fire or electrical shock Turn the power switch off O immediately be absolutely certain to remove the power plug from the outlet and then contact your service representative If anything harmful paper clips water other fluids etc falls into the machine turn the power switch off O immediately Next be absolutely certain to remove the power plug from the outlet to avoid the danger of fire or electrical shock Then contact your service representative Do not remove or connect the power plug with wet hands as there is a danger of electrical shock Always contact your service representative for maintenance or repair of internal parts OC A AZ OBO XVII XVIII Do not pull the power cord when removing it from the outlet If the power cord is pulled the wires may become broken and there is a danger of fire or electrical shock Always grasp the power plug when removing the power cord from the outlet Always remove the power plug from the outlet when moving the machine If the power cord is damaged there is a danger of fire or electrical shock lf the machine will not be used for a short period of time overnight etc turn the power switch off O If it will not be used for an extended period of time vacations etc remove the power plug from the outlet for safety purposes during the time the machine is not in use Always hold the designated parts when lifting or moving the mac
20. crodrive for the virtual mailboxes is full Print out accumulated jobs in the virtual mailboxes Warning Printing job cannot be done in current resolution because there is not enough image adapt internal memory Try adding more memory or changing resolution Warning The printer s internal memory is running low due to too many numbers of fonts and low memory macros downloaded Try deleting unnecessary fonts and macros t Messages separated by Y are displayed alternately tt After this error has happened page protect mode will be automatically turned on To maintain optimum use of memory during printing we recommend you manually turn off page protect mode 4B OPERATION GUIDE Troubleshooting Storage Error Codes OPERATION GUIDE Microdrive Errors e e 01 Microdrive format error If this error recurs even if the power has been turned off and then on reformat the Microdrive 02 The disk system is not installed Recheck the requirements for using the system and the devices There is no available Microdrive space Delete unnecessary files etc in order to free up space 05 The specified file does not exist in the Microdrive 0 The specified file does not exist in the Microdrive O file does not exist in the Microdrive KERELE is no memory available to the Microdrive system Increase the available memory Formatting is not possible because host data is being spooled on the Microdrive Wait until the Microdrive is re
21. e rear of the printer CAUTION The fuser unit inside the printer is hot Do not touch it with your hands as it may result in burn injury Close the rear unit The printer warms up and resumes printing out Paper is jammed at optional paper cassette 2 to 4 Refer to the Installation Guide for the optional paper feeder and remove the jammed paper Paper is jammed at the optional envelope feeder Remove the jammed paper using the same procedure as for a jam at the MP Tray Then open and close the paper transfer unit For details refer to the User s Manual for the envelope feeder Paper is jammed at the optional bulk paper feeder Detach the bulk paper feeder from the printer by sliding with the rail away from the printer holding the bulk paper feeder by both hands If paper is partially fed out from the feeder s output slot pull the paper out by hand OPERATION GUIDE 5 Specifications NOTE Specifications are subject to change without notice PG L230 PG L235 PG L245 Printing Method Semiconductor laser and electrophotography Printing Speeds Simplex A5 19ppm A6 21ppm A6 23ppm A4 30ppm A5 21ppm A5 23ppm Letter 31ppm A4 35ppm A4 45ppm Legal 26ppm Letter 37ppm Letter 47ppm Legal 28ppm Legal 38ppm A4 15 5ppm A4 25ppm A4 33 5ppm Letter 15 5ppm Letter 26ppm Letter 34 5ppm Paper Sizes Cassette A4 A5 B5 Letter Legal A4 A5 B5 A6 Letter Legal Folio Oficio2 Custom Folio
22. ed mark All other brand and product names are registered trademarks or trademarks of their respective companies Operation Guide iii This product uses PeerlessPrintXL to provide the HP LaserJet compatible PCL 6 language emulation PeerlessPrintXL is a trademark of Peerless Systems Corporation 2381 Rosecrans Ave El Segundo CA 90245 U S A This product was developed using the Tornado Real Time Operating System and Tools from Wind River Systems This product contains UFST and MicroType from Monotype Imaging Inc OPERATION GUIDE License Agreements IBM Program License Agreement OPERATION GUIDE THE DEVICE YOU HAVE PURCHASED CONTAINS ONE OR MORE SOFTWARE PROGRAMS PROGRAMS WHICH BELONG TO INTERNATIONAL BUSINESS MACHINES CORPORATION IBM THIS DOCUMENT DEFINES THE TERMS AND CONDITIONS UNDER WHICH THE SOFTWARE IS BEING LICENSED TO YOU BY IBM IF YOU DO NOT AGREE WITH THE TERMS AND CONDITIONS OF THIS LICENSE THEN WITHIN 14 DAYS AFTER YOUR ACQUISITION OF THE DEVICE YOU MAY RETURN THE DEVICE FOR A FULL REFUND IF YOU DO NOT SO RETURN THE DEVICE WITHIN THE 14 DAYS THEN YOU WILL BE ASSUMED TO HAVE AGREED TO THESE TERMS AND CONDITIONS The Programs are licensed not sold IBM or the applicable IBM country organization grants you a license for the Programs only in the country where you acquired the Programs You obtain no rights other than those granted you under this license The term Programs means the
23. estion as well as contact with your eyes and skin OOO e If you do happen to inhale toner move to a place with fresh air and gargle thoroughly with a large amount of water If coughing develops contact a physician e If you do happen to ingest toner rinse your mouth out with water and drink 1 or 2 cups of water to dilute the contents of your stomach If necessary contact a physician e If you do happen to get toner in your eyes flush them thoroughly with water If there is any remaining tenderness contact a physician e If toner does happen to get on your skin wash with soap and water Do not attempt to force open or destroy the Toner Container S Other Precautions After use always dispose of the Toner Container in accordance with Federal State and Local rules and regulations Store all consumables in a cool dark location If the machine will not be used for an extended period of time remove the paper from the cassette return it to its original package and reseal it XIX About the Operation Guide XX This Operation Guide has the following chapters Chapter 1 Machine Parts This chapter explains the names of parts Chapter 2 Printing Operation This chapter explains how to print from your workstation Chapter 3 Maintenance This chapter explains how to replace the toner container and how to care for your printer Chapter 4 Troubleshooting This chapter explains how to handle printer problems that
24. he printer is plugged in and connected to the PC before installing the printer driver from the CD ROM Switch on the PC and activate Windows NOTE If the Welcome to the Found New Hardware Wizard dialog box displays select Cancel Insert the CD ROM supplied with the printer into the optical drive of the PC The installation program launches NOTE If the installation program fails to launch use Windows Explorer to access the CD ROM and select Setup exe Perform the procedures displayed on the installation program to install the Printing System Driver OPERATION GUIDE Printing Operation Printing from Application Software OPERATION GUIDE P GWG N 5 The steps required to print a document created with an application are explained below You can select the printing Paper Size and Output Destination Load the paper required into the paper cassette From the application File menu select Print The Print dialog box displays Click the drop down list of printer names All the printers installed in Windows are listed Click the name of the machine Use Number of copies to enter the number of prints required Up to 999 copies can be entered For Microsoft Word we recommend that you click Options and specify Use printer settings for the Default tray Pipe range 4 T al l Current page Print Eq Pages naa ZI Eria pepe foie d andlor page artar Pont separ shed iy comm For enigi 1 3 1 Printing opbons
25. hine 9 For safety purposes always remove the power plug from the outlet when performing cleaning operations If dust accumulates within the machine there is a danger of fire or other trouble It is therefore recommended that you consult with your service representative in regard to cleaning of internal parts This is particularly effective if accomplished prior to seasons of high humidity Consult with your service representative in regard to the cost of cleaning the internal parts of the machine Other Precautions Do not place heavy objects on the machine or cause other damage to the machine Do not open the upper front cover turn off the power switch or pull out the power plug during copying When lifting or moving the machine contact your service representative Do not touch electrical parts such as connectors or printed circuit boards They could be damaged by static electricity Do not attempt to perform any operations not explained in this handbook Use shielded interface cables OPERATION GUIDE Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure Cautions when Handling Consumables OPERATION GUIDE Do not attempt to incinerate the Toner Container Dangerous Sparks may cause burns Keep the Toner Container out of the reach of children If toner happens to spill from the Toner Container avoid inhalation and ing
26. ing is finished however the message does not automatically 3 3 Maintenance change to Ready To restart printing you must press GO and make the printer ready In either case replace the toner container refer to Toner Container Replacement on page 3 3 Replacing the Toner Container 3 4 NOTE During toner container replacement temporarily put storage media and computer supplies such as floppy disks away from around the toner container This is to avoid damaging media by the magnetism of toner This section explains how to replace the toner container When replacing the toner container always replace the waste toner box at the same time If this box is full the printer may be damaged or contaminated by the waste toner that may spill over the box NOTE You do not have to turn printer power off before starting the replacement Any data that may be under printing process in the printer will be deleted if you turn printer power off Open the top cover OPERATION GUIDE Maintenance 2 Push lock lever to the right and pull out the toner container Lock Lever 3 Put the old toner container in the plastic bag contained in the toner kit and discard it later according to the local code or regulations for waste disposal Plastic Bag 4 Take the new toner container out of the toner kit Shake the new toner container at least 10 times as shown in the figure in order to distribute the toner evenly inside the
27. ion panel to change the environmental settings on the interface from which data are presently being received ID Error The user ID entered for a private job or a stored job is not correct Check the user ID that you specified on the printer driver Install MK Replace Maintenance Kit which is displayed on the message display Replacement of the maintenance kit is necessary at every 300 000 pages of printing and requires professional servicing Contact your service technician Current print processing cannot continue because of occurrence of KPDL error which is categorized by To print out an error report display gt Print KPDL err s from the menu system and select On Press GO to resume printing You can abandon printing by pressing Cancel If Auto Error Clear is set to On printing will be automatically resumed after a preset period of time Load Cassette The paper cassette matching the paper size and paper type of the print job is A4 PLAIN t empty Load paper into the paper cassette as displayed in place of Press GO to resume printing If you want to print from a different paper source press or m to display Use alternative and you can change the source for paper feeding After selecting a paper source and pressing Menu Paper Handling gt appears By pressing the the paper type settings menu appears After setting the correct paper type press OK and printing starts 4 6 OPERATION GUIDE Trouble
28. is chapter contains explanations on the following topics e Components at the Front of the Printer 1 2 e Components at the Left of the Printer and Internal d ri paote a eee ee ne TERORII ee Pe Nee aa 1 2 e Components at the Rear of the Printer 1 3 Machine Parts Components at the Front of the Printer PG L230 PG L235 L245 Top Cover Paper Stopper Top Tray Right Cover Operation Panel Paper Cassette MP Multi Purpose Tray NO O89 BP N Components at the Left of the Printer and Internal Components Left Cover Toner Container Power Switch PD GW N a Waste Toner Box 1 2 OPERATION GUIDE Machine Parts Components at the Rear of the Printer OPERATION GUIDE O N OOF BW DO il il i ples CLU B lili i All UL USB Memory Slot USB Interface Connector Network indicators PG L235 L245 only Network Interface Connector PG L235 L245 only Parallel Interface Connector Power Cord Connector Rear Unit Option Interface Slot Network Serial CF card Microdrive 1 3 Machine Parts 1 4 OPERATION GUIDE OPERATION GUIDE 2 Printing Operation This chapter contains explanations on the following topics e Loading Printer Driver RPR OO OR RR RARE RIO 2 2 e Printing from Application Software ccccssseeesseeeees 2 3 2 1 Printing Operation Loading Printer Driver 2 2 Ensure t
29. ising companies retain the following technical documentation in anticipation of the inspection that may be conducted by the authorities concerned User s instruction that conforms to the applicable specifications Technical drawings Descriptions of procedures that guarantee conformity Other technical information XI Energy Star Program As an Enen r Star Partner we have determined that this product meets the ENERGY STAR guidelines for energy efficiency The basic objective of the ENERGY Star Program is to reduce environmental ENERGY STAR pollution by encouraging the manufacture and sale of equipment that uses energy more efficiently This printer is equipped with a sleep timer function that conforms with the standards of the Enea Star Program This function makes it possible to reduce the amount of electrical power consumed by the printer For maximum power savings turn off the printer s power supply when not using the printer for extended periods of time For details on the sleep timer function and printer power consumption refer to this manual Initial settings of the sleep timer function and power saved using the sleep timer function ee PG L230 PG L235 PG L245 Initial Auto Sleep 15 minutes 60 minutes 15 minutes 60 minutes 15 minutes 60 minutes Setting Power 4 4W 30W 4 9W 40W 5 5W 75W Consumption in Auto Sleep ENERGY STAR program guideline XII OPERATION GUIDE Please read this Operation G
30. l Components 1 2 Components at the Rear of the Printer 1 3 Printing Operation Loading Printer Driver si ack ck ee aw ae Bar ae Bl aw Re Sal ee hk ey aad a Bae 2 2 Printing from Application Software 0 0 0 eee eee eens 2 3 Maintenance General Information 0 0 ee eee ee ee eee es 3 2 Toner Container Replacement 0 000 cc ee eee eee ees 3 3 Cleaning the Printer eee eee ee eens 3 8 Troubleshooting General Gude INS Sis a eda e ee eee ak tenho tg E Se ed a ae rin a 7 ra 4 2 Print Quality Problems 3 lt 2d4 lt 20ad waves bode aed vos Mani i a au ede Ub decedent bees 4 3 Error Messages a tn n usa 8 ek ash doe meade ae cane ut apa Saeed ded and i eh Ai d E Eh apo ae ace 4 5 Clearing Paper JAMS 1 ee ee eee ee eee eens 4 11 Specifications OPERATION GUIDE Contents OPERATION GUIDE Legal and Safety Information CAUTION NO LIABILITY IS ASSUMED FOR ANY DAMAGE CAUSED BY IMPROPER INSTALLATION Notice on Software SOFTWARE USED WITH THIS PRINTER MUST SUPPORT THE PRINTER S EMULATION MODE The printer is factory set to emulate the PCL The emulation mode can be changed Notice The information in this guide is subject to change without notification Additional pages may be inserted in future editions The user is asked to excuse any technical inaccuracies or typographical errors in the present edition No responsibility is assumed if accidents occur while
31. m the component where the paper jam has occurred is also indicated The printer automatically goes off line when this message is displayed Remove jammed paper After removing jammed paper the printer will re start printing Possible Paper Jam Locations The figure below explains the printer s paper paths including the options The locations where paper jams might occur are also shown here with each location explained in the table below Paper jams can occur in more than one component on the paper paths Face up Tray PT 310 Paper Feeder Paper jam message Paper jam Description Reference page location Paper is jammed at the MP tray or page 4 13 MP Tray optional envelope feeder or bulk paper feeder if installed PG L235 Paper jam and PG L245 only page 4 16 EF Bulk Feeder OPERATION GUIDE 4 11 Troubleshooting Paper jam message Paper jam Description Reference page location Paper is jammed at the paper page 4 13 cassette The cassette number can be 1 topmost to 4 bottom PG L230 1 and 2 Paper jam C Paper is jammed inside the duplex page 4 14 Duplexer section Paper jam Cassette 1 to 4 Paper jam Printer Paper is jammed inside the printer page 4 15 Paper is jammed inside the rear unit page 4 16 General considerations for clearing jams Paper jam Rear Unit Bear in mind the following considerations when attempting jam removal CAUTION When pulling the paper pull it gently so as not to tear
32. may occur such as paper jams Chapter 5 Specifications This chapter lists the printer s specifications OPERATION GUIDE Conventions This manual uses the following conventions e E RC Italic Typeface Used to emphasize a key word Close the top cover phrase or references to Refer to Toner Container Replacement additional information on page 3 3 Courier Typeface Used to denote messages or Replace the waste toner box when the names displayed on the Check waste toner box message is operation panel displayed Bold Typeface Used to denote operation panel Press Menu keys Used to provide additional or useful information about a NOTE For information about storing the function or feature pin refer to step 10 Use to provide important N information IMPORTANT Ensure paper is not folded curled or damaged Caution Cautions are statements that E N N A suggest mechanical damage as CAUTION Do not pull the cassette out a result of an action when holding the front of the machine Warning Used to alert users to the WARNING High voltage is present possibility of personal injury in the charger section OPERATION GUIDE XXI XXII OPERATION GUIDE OPERATION GUIDE 1 Machine Paris This section provides explanations and illustrations for you to determine the parts and their functions Try to be familiar with the names and functions of these parts for correct use and optimal performance Th
33. n this area because it may result in burn 1 Pull the paper cassette all the way out of the printer 2 Open the duplexers cover and remove any jammed paper CI aco TE i Baan pai 3 Insert the paper cassette into the slot in the printer The printer warms up and resumes printing 4140000 OPERATION GUIDE Troubleshooting The Inside of Printer OPERATION GUIDE 4 2 Open the top cover and MP tray Lift the developer unit together with the toner container out of the printer Open the feed cover Remove the paper from the printer If the jammed paper appears to be pinched by rollers pull it along the normal running direction of the paper NOTE If you cannot find a paper jam try checking inside the rear of the printer Refer to Rear Unit on page 4 16 Insert the developer unit together with the toner container back into the machine Close the top cover and MP tray The printer warms up and resumes printing 4 15 Troubleshooting 4 16 Rear Unit Paper Feeder Envelope Feeder Bulk Paper Feeder If paper is not completely ejected into the output tray open the rear unit Open the fuser cover and remove the jammed paper by pulling it out ae q I fe D u Zj ee NOTE If you cannot find a paper jam try checking inside th
34. nserted Insert the developer unit developer unit securely No multi copies Multi copies cannot be printed because RAM disk is disabled or the Microdrive is Press GO not installed There is no available RAM disk or Microdrive space Delete unnecessary files Press GO to print error report Paper jam A paper jam has occurred The location of the paper jam is indicated in place of the A e AIE Eee Ea s For details refer to Clearing Paper Jams on page 4 11 Paper path error There is no paper cassette in the feeder or the cassette is not inserted properly After reinserting the paper cassette you should be able to print When two or more optional feeders are installed and the lowest one is selected the same message will appear if any of the upper paper feeder and the printer cassette is improperly installed aaa Goer The print job transferred to the printer was too complex to print on a page Press GO to resume printing A page break may be automatically inserted in some places You can abandon printing by pressing Cancel If Auto Error Clear is set to On printing will be automatically resumed after a preset period of time RAM Gick Servant A RAM disk error has occurred Look at the error code given in place of and Press GO refer to Storage Error Codes on page 4 9 To ignore the RAM disk error press GO OPERATION GUIDE gi Troubleshooting Message Corrective Action Replace toner Toner has run out in the t
35. ntry in question Code 542003en
36. of the required action are indicated inside the symbol Alert of required action Remove the power plug from the outlet Always connect the machine to an outlet with a ground connection 909 Please contact your service representative to order a replacement if the safety warnings in this Operation Guide are illegible or if the guide itself is missing fee required XIV OPERATION GUIDE AN Installation Precautions Environment A CAUTION Avoid placing the machine on or in locations which are unstable or not level Such locations may cause the machine to fall down or fall over This type of situation presents a danger of personal injury or damage to the machine Avoid locations with humidity or dust and dirt If dust or dirt become attached to the power plug clean the plug to avoid the danger of fire or electrical shock Avoid locations near radiators heaters or other heat sources or locations near flammable items to avoid the danger of fire To keep the machine cool and facilitate changing of parts and maintenance allow access space as shown below Leave adequate space especially around the vents to allow air to be properly ventilated out of the printer QUO O Top 300mm 11 13 16 Left 300mm Right 100mm Rear 200mm 7 7 8 Front 600mm 11 13 16 3 15 16 23 5 8 Other Precautions OPERATION GUIDE Adverse environmental conditions may affect the safe operation and performance of
37. oner container Replace the toner container using a new Clean printer toner kit The printer does not operate when this message is displayed Set paper The MP tray is out of paper Load paper and press GO Note that feeding the Press GO paper having a paper size which does not match the current paper size from the MP tray can cause paper jam Tones Je Toner is running low Replace the toner container using a new toner kit The top tray has become full You must remove all printed pages from the top tray paper full When the printer detects that the top tray is empty again the printer will continues printing into the top tray Guinean Toner The toner container is not original Use of original Olivetti toner kits is highly recommended to prevent printer trouble and ensure the long life of the printer If a toner container which indicates Toner loworReplace toner Clean printer Is installed to other printers of the same model the message indicating Unknown Toner Installed may be displayed But in this case this toner container can be used USB memory err An USB flash memory error has occurred Look at the error code given in place of Press GO and refer to Storage Error Codes on page 4 9 To ignore the USB memory error press GO USE men meu The USB flash memory is accidentally removed from the printer To ignore the USB Press GO memory error press GO The message display returns to Ready CAs qa oi The storage area in the Mi
38. pistorasiaan CLASS 1 LASER PRODUCT LASER KLASSE 1 e REMOVE POWER CORD BEFORE SERVICE AND FUSE REPLACEMENT VOR WARTUNG UND SICHERUNGS WECHSEL NETZSTECKER ZIEHEN POUR PREVENIR LES CHOCS ELECTRIQUES COUPER L ALIMENTATION AVANT DE REMPLACER LE FUSIBLE DESENCHUFE EL CORDON DE ALIMENTACION ANTES DEL SERVICIO Y DEL REEMPLAZO DEL FUSIBLE PRIMA DI CAMBIARE FUSIBILI O DI ESEGUIRE RIPARAZIONI STACCATE IL CAVO DI ALIMENTAZIONE gt ABS lt DESIGNED IN JAPAN ASSEMBLED IN CHINA Ozone Concentration The printers generate ozone gas 0 which may concentrate in the place of installation and cause an unpleasant smell To minimize the concentration of ozone gas to less than 0 1ppm we recommend you not to install the printer in a confined area where ventilation is blocked OPERATION GUIDE CE Marking Directive OPERATION GUIDE According to Council Directive 89 336 EEC 2006 95 EEC and 1999 5 EC Manufacturer Olivetti S p A Manufacturer s address Via Jervis 77 Ivrea TO Italy Declares that the produci Product name Laser Printer Model number PG L230 PG L235 PG L245 as tested with enhancement optional unit Paper Feeder PF 310 Conforms to the following product specifications EN 55 022 1998 A1 2000 A2 2003 Class B EN 61 000 3 2 2000 EN 61 000 3 3 1995 A1 2001 EN 55 024 1998 A1 2001 A2 2003 EN 60 950 1 2001 A411 EN 60 825 1 1994 A1 A2 EN 300330 1 EN 300330 2 The manufacturer and iis merchand
39. s errors and omissions Vil viii 10 11 12 13 14 THE PARTIES AGREE THAT ALL OTHER WARRANTIES EXPRESSED OR IMPLIED INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY ARE EXCLUDED Your exclusive remedy and the sole liability of Monotype Imaging in connection with the Software and Typefaces is repair or replacement of defective parts upon their return to Monotype Imaging INNO EVENT WILL MONOTYPE IMAGING BE LIABLE FOR LOST PROFITS LOST DATA OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES CAUSED BY ABUSE OR MISAPPLICATION OF THE SOFTWARE AND TYPEFACES Massachusetts U S A law governs this Agreement You shall not sublicense sell lease or otherwise transfer the Software and or Typefaces without the prior written consent of Monotype Imaging Use duplication or disclosure by the Government is subject to restrictions as set forth in the Rights in Technical Data and Computer Software clause at FAR 252 227 7013 subdivision b 3 ii or subparagraph c 1 ii as appropriate Further use duplication or disclosure is subject to restrictions applicable to restricted rights software as set forth in FAR 52 227 19 c 2 YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT UNDERSTAND IT AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS NEITHER PARTY SHALL BE BOUND BY ANY STATEMENT OR REPRESENTATION NOT CONTAINED IN THIS AGREEMENT NO CHANGE IN THIS AGREEMENT IS EFFECTIVE U
40. s only and will be limited to the greater of 1 the equivalent of U S 25 000 in your local currency or 2 IBM s then generally available license fee for the Program This limitation will not apply to claims for bodily injury or damages to real or tangible personal property for which IBM is legally liable IBM will not be liable for any lost profits lost savings or any incidental damages or other economic consequential damages even if IBM or its authorized supplier has been advised of the possibility of such damages IBM will not be liable for any damages claimed by you based on any third party claim This limitation of remedies also applies to any developer of Programs supplied to IBM IBM s and the developer s limitations of remedies are not cumulative Such developer is an intended beneficiary of this Section Some jurisdictions do not allow these limitations or exclusions so they may not apply to you 4 General You may terminate your license at any time IBM may terminate your license if you fail to comply with the terms and conditions of this license In either event you must destroy all your copies of the Program You are responsible for payment of any taxes including personal property taxes resulting from this license Neither party may bring an action regardless of form more than two years after the cause of action arose If you acquired the Program in the United States this license is governed by the laws of the State of
41. setting is On switch it to off on the operation panel Faint or blurred printing Make sure the paper type setting is correct the paper being used Check the operation panel If the Toner low message is displayed install a new toner kit To replace toner refer to Toner Container Replacement on page 3 3 OPERATION GUIDE 4 3 Troubleshooting Printed Results Corrective Action Grey background Check the operation panel If the Toner low message is displayed and the Attention indicator is flashing install a new toner kit Refer to Toner Container Replacement on page 3 3 Check the print density Display the print density menu from the operation panel and select a lighter density setting Dirt on the top edge or back of the Clean the parts in the paper paths such as the paper cassette paper etc Printing incomplete or out of Check that the application software is correctly operated position Refer to Tips on page 4 2 ABC 4 4 OPERATION GUIDE Troubleshooting Error Messages The following table lists errors and maintenance messages that you can be dealt with by yourself If Call service appears turn off the printer disconnect the power cord and contact your service technician Some errors cause the alarm to sound To stop the alarm press Cancel Corrective Action Add paper MPTray The paper has run out in the paper source displayed Supply paper according to the paper source displayed paper cassettes
42. shooting Message Corrective Action Load MP Tray There is no paper cassette installed in the printer that matches the paper size and A4 PLAIN paper type of the print job Set paper in the MP tray Press GO to resume printing Note that feeding the paper having a paper size which does not match the current paper size from the MP tray can cause paper jam If you want to print from a different paper source press or m to display Use alternative and you can change the source for paper feeding After selecting a paper source and pressing Menu Paper Handling gt appears By pressing the the paper type settings menu appears After setting the correct paper type press OK and printing starts Memory overflow The total amount of data received by the printer exceeds the printer s internal Press GO memory Try adding more memory Press GO to resume printing You can abandon printing by pressing Cancel If Auto Error Clear is set to On printing will be automatically resumed after a preset period of time MemoryCard err A CompactFlash card error has occurred Look at the error code given in place of Press GO and refer to Storage Error Codes on page 4 9 To ignore the CompactFlash card error press GO MemoryCard err20 The CompactFlash card is accidentally removed from the printer s slot during reading Turn the power switch off and then back on again Missing The developer unit is either not installed or incorrectly i
43. ted to you other than a License to use the Software on the terms expressly set forth in this Agreement To protect proprietary rights of Monotype Imaging you agree to maintain the Software and other proprietary information concerning the Typefaces in strict confidence and to establish reasonable procedures regulating access to and use of the Software and Typefaces You agree not to duplicate or copy the Software or Typefaces except that you may make one backup copy You agree that any such copy shall contain the same proprietary notices as those appearing on the original This License shall continue until the last use of the Software and Typefaces unless sooner terminated This License may be terminated by Monotype Imaging if you fail to comply with the terms of this License and such failure is not remedied within thirty 30 days after notice from Monotype Imaging When this License expires or is terminated you shall either return to Monotype Imaging or destroy all copies of the Software and Typefaces and documentation as requested You agree that you will not modify alter disassemble decrypt reverse engineer or decompile the Software Monotype Imaging warrants that for ninety 90 days after delivery the Software will perform in accordance with Monotype Imaging published specifications and the diskette will be free from defects in material and workmanship Monotype Imaging does not warrant that the Software is free from all bug
44. the machine Install in an air conditioned room recommended room temperature around 23 C humidity around 60 RH and avoid the following locations when selecting a site for the machine e Avoid locations near a window or with exposure to direct sunlight XV e Avoid locations with vibrations Avoid locations with drastic temperature fluctuations e Avoid locations with direct exposure to hot or cold air e Avoid poorly ventilated locations During printing some ozone is released but the amount does not cause any ill effect to one s health If however the printer is used over a long period of time in a poorly ventilated room or when printing an extremely large number of copies the smell may become unpleasant To maintain the appropriate environment for print work it is suggested that the room be properly ventilated Power Supply Grounding the Machine A WARNING Do not use a power supply with a voltage other than that specified Avoid multiple connections in the same outlet These types of situations present a danger of fire or electrical shock Plug the power cord securely into the outlet If metallic objects come in contact with the prongs on the plug it may cause a fire or electric shock Always connect the machine to an outlet with a ground connection to avoid the danger of fire or electrical shock in case of an electric short If an earth connection is not possible contact your service representative O
45. ther Precautions Connect the power plug to the closest outlet possible to the machine The power supply cord is used as the main disconnect device Ensure that the socket outlet is located installed near the equipment and is easily accessible Handling of Plastic Bags XVI A WARNING Keep the plastic bags that are used with the machine away from children The plastic may cling to their nose and mouth causing S suffocation OPERATION GUIDE AN Precautions for Use OPERATION GUIDE Cautions when Using the Machine A WARNING Do not place metallic objects or containers with water flower vases flower pots cups etc on or near the machine This situation presents a danger of fire or electrical shock should they fall inside Do not remove any of the covers from the machine as there is a danger of electrical shock from high voltage parts inside the machine Do not damage break or attempt to repair the power cord Do not place heavy objects on the cord pull it bend it unnecessarily or cause any other type of damage These types of situations present a danger of fire or electrical shock Never attempt to repair or disassemble the machine or its parts as there is a danger of fire electrical shock or damage to the laser If the laser beam escapes there is a danger of it causing blindness If the machine becomes excessively hot smoke appears from the machine there is an odd smell or any other abnormal situ
46. tosh OS 9 Apple Macintosh OS X Controller PowerPC 440 400MHz PowerPC 750CXr PowerPC 750CXr 400MHz 5OOMHz Memory Standard 64MB 128MB Maximum 576MB 640MB Interface Standard USB 1 Hi Speed USB USB 1 Hi Speed USB Parallel 1 IEEE1284 Parallel 1 IEEE1284 KUIO LV slot 1 Network 1 10BASE T 100BASE TX USB memory slot 1 Full KUIO LV slot 1 Speed USB USB memory slot 1 Full Speed USB IB 11 Serial IB 11 Serial IB 21E IB 30 10BASE T IB 21E 10BASE T 100BASE TX 100BASE TX Operation Environment Temperature 10 to 32 5 C Relative Humidity 15 to 80 Altitude 2 500m maximum Illumination 1 500lux maximum Dimensions W x D x H _ 382 x 394 x 285mm 382 x 394 x 320mm 15 3 8 x 15 1 2 x 12 5 8 15 3 8 x 15 1 2 x 11 1 4 Weight without toner 15 8kg 331b 16 7kg 33 5 16lb 16 8kg 33 5 161b container 5 2 OPERATION GUIDE Operating noise in accordance with ISO7779 Bystander Position sound pressure level at the front OPERATION GUIDE Description Specifications PG L230 PG L235 PG L245 During printing LpA 50qB A During standby LpA 40adB A During sleep mode immeasurably low During printing LpA 52adB A During standby LpA 40dB A During sleep mode immeasurably low During printing LpA 56dB A During standby LpA 40dB A During sleep mode immeasurably low 5 3 Specifications 5 4 OPERATION GU
47. uide before using the machine Keep it close to the machine for easy reference The sections of this guide and paris of the machine marked with symbols are safety warnings meant to protect the user other individuals and surrounding objects and ensure correct and safe usage of the machine The symbols and their meanings are indicated below DANGER Indicates that serious injury or even death will very possibly result from insufficient attention to or incorrect compliance with the related points WARNING Indicates that serious injury or even death may result from insufficient attention to or incorrect compliance with the related points CAUTION Indicates that personal injury or mechanical damage may result from insufficient attention to or incorrect compliance with the related points aad OPERATION GUIDE xiii Symbols The following symbols indicate that the related section includes safety warnings Specific points of attention are indicated inside the symbol General warning Warning of danger of electrical shock Warning of high temperature gt gt gt The following symbols indicate that the related section includes information on prohibited actions Specifics of the prohibited action are indicated inside the symbol Warning of prohibited action Disassembly prohibited QO The following symbols indicate that the related section includes information on actions which must be performed Specifics
Download Pdf Manuals
Related Search