NAMCO Bandai Games Skis 90500041 User's Manual
Contents
1. Installation and Commissioning Manual IT IS THE RESPONSIBILITY OF THE OPERATOR TO MAINTAIN CUSTOMER SAFETY AT ALL TIMES AND IT IS IMPERATIVE THAT THE DETAILS SET OUT IN THIS MANUAL ARE FOLLOWED PRECISELY Part No 90500041 SAFETY WARNING In order to use this machine safely be sure to read this Installation and Commissioning manual and the Operators Manual carefully before installation adjustment or use of this machine Whenever the owner of this machine entrusts disassembly installation adjustment routine maintenance or trouble shooting to another person the owner should ensure that that person read the appropriate precautions and relevant sections of this manual before starting work In order that no accidents occur when the machine is in operation strictly follow the notes on safety described below Do not turn this machine ON until it has been correctly installed Warnings for Operation C Requirements Only operate this machine after checking that it has been installed correctly and in accordance with this manual Parts of this machine move during game play so there are places where the distance between the stationary section and moveable section changes There are warning notices to keep hands and feet clear of moving parts however if the operator feels that a person is in any danger he should warn that person accordingly The warning notices must always be kept in good condition and replaced if worn so2. 2 An Error Occurs During Play a Ifthe motor stops function during game play the following error screen will be displayed b Turn the power OFF and then back ON The motor will be checked automatically c If there is still a problem follow the instructions detailed in the Operators Manual section 6 4 3 Errors At Start up WARNING STEP LOCK DEVICE IS OUT OF ORDER CALL THE ATTENDANT IMMEDIATELY Page 20
3. ensure that the test switch is returned to the OFF position to return to normal game mode The Test Switch must always be in the OFF position for normal game mode MENU COIN OPTIONS GAME OPTIONS I O TEST SOUND TEST MONITOR TEST ADS TEST OTHERS L R SELECTION BUTTON CHOOSE ENTER Sets the price of play See 3 3 1 Sets the game options See 3 3 2 Used for testing switches and controls See 3 3 3 Used for testing sound and setting volumes See 3 3 4 Used for adjusting the monitor Displays accumulated game data Used for testing the PC Boards and for initializing all of the settings Select L R Buttons Page 9 Decision Button 3 3 1 Coin Options 1 Select item 1 COIN OPTIONS on the menu screen to set the game cost and COIN OPTIONS DEFAULT IN GREEN GAME COST related settings 1 COIN 1 CREDIT 2 Press Select L R to select the required item FREE PLAY OFF 3 Use the Decision EXIT button to adjust the RUIDOS SELECT L R BUTTON DECISION BUTTON CHOOSE CHANGE 4 Select EXIT to return to the menu screen Note The price of play on this machine is set within the Cashflow Coin Mech Ensure that the Coin Options on the screen are set as shown in the following table CONTENTS FACTORY SET a Game Cost No of Coins required for No of credits settable 1 9 1 Coin 1 Credit Page 10 3 3 2 G
4. 3 Use Select L R buttons to change to the next pattern and Decision button to return to the Main Menu 3 3 6 ADS Data 1 Select item 6 ADS Data on the menu screen to view machine history details 2 The following screen will appear on the monitor ADS RACE T T NOV INT EXP NOV INT EXP PLAY 0000 0000 0000 0000 0000 0000 GOAL 0000 0000 0000 0000 0000 0000 EXTO 0000 0000 0000 EXT1 0000 0000 0000 EXT2 0000 0000 0000 GATE NOV INT EXP RACE 000 00 00 000 00 00 000 00 00 T T 000 00 00 000 00 00 000 00 00 PLAY TIME 000 00 00 PLAY NUMBER 0000 INITIALIZE EXIT L R SELECT CHOOSE DECISION ENTER Page 16 pm o o O_O a Play Total number of games played at each difficulty level for each course b Goal Total number of games completed at each difficulty level for each course c Ext Number of games finishing at 1st extended time gate at each difficulty level in race game d Ext1 Number of games finishing at 2nd extended time gate at each difficulty level in race game e Ext2 Number of games finishing at 3rd extended time gate at each difficulty level in race game f Gate Total number of gates completed for each difficulty level in T T game g Race Total time in Hrs Mins Secs each difficulty level has been played in race game h T T Total time in Hrs Mins Secs each difficulty level has been played in T T game i Play Time Total time in Hrs Mins Secs game has been
5. Test from the I O Test menu The following screen will appear on the monitor On entering Switch Test the Skis will be unlocked Ensure that the Skis are returned to the locked condition at the end of the test by entering Motor Test See 3 3 3 2 SWITCH TEST TEST SW ON COIN SW ON SERVICE SW ON R SELECTION BUTTON ON DECISION BUTTON ON eee L SELECTION BUTTON ON SWING 0000 0000 CENTER EDGE 0000 0000 CENTER L R SELECT DECISION EXIT The word ON will appear next to items a to f each time the respective switch is operated When the skis are pushed left SWING CENTRE will change to LEFT and OK will appear just before it reaches the extreme left When the skis are pushed right CENTRE will change to RIGHT and OK will appear just before it reaches the extreme right 0000 will increase when the skis are moved to the right and decrease when they are moved to the left When the skis are tilted EDGE CENTRE will change to LEFT or RIGHT and OK will appear just before they are fully tilted 0000 will change as the skis are tilted Left step Right step stand and apply weight to the edges of the ski steps There is no problem if OK is not displayed when stand ing on the steps in the same way as normal play If OK is not displayed when the edge is tilted left or right re initialize as described
6. in section 3 4 Initialization EDGE OK will only appear if you Operate both of the Select L R buttons and Decision button together to exit and return to the I O Test menu screen Page 13 3 3 3 2 Motor Test 1 Select Motor Test from the I O Test menu The following screen will ap pear on the monitor MOTOR TEST NOW MOTOR STATE LOCK GO MOTOR FREE EXIT L R SELECT BUTTON CHOOSE DECISION BUTTON EXIT a Displays the current condition of the Skis Display will show LOCK FREEING FREE LOCKING as the Skis are tested b Allows the Skis to be locked and unlocked Display will show FREE NOW MOVING LOCK as the Skis are being tested Note Ensure Skis are in the locked condition before returning to normal game mode 3 3 3 3 Step Adjust 1 Select Step Adjust from the I O Test menu On entering STEP ADJUST test Step Adjust on the I O Menu Screen will blink and INITIALIZE COMPLETED will appear and be blinking Ski Step initialization is now completed 2 Select EXIT to return to the Main Menu Screen Page 14 3 3 4 Sound Test 1 Select item 4 Sound Test on the menu screen to test the sound and speakers 2 The following screen will appear on the monitor SOUND TEST VOLUME LEFT SP RIGHT SP REQUEST SONG No EXIT L R SELECT BUTTON CHOOSE DECISION BUTTON ENTER 3 Select the requir
7. Also ensure that the steps are not touched during the motor check or the check will not be per formed correctly If the first lock is not completed within fifteen seconds from power up the following error display screen appears If this happens refer to section 4 1 Adjustment Method a and initialize the controls MOTOR ERROR 1 PLEASE STEP ADJUST If an error other than the one shown above is displayed it is possible that a fuse has blown there is a problem with the step motor mechanism or the steps are not moving freely If the first lock is completed within fifteen seconds but the steps cannot be released Motor Error 2 screen is displayed until the fault is rectified Page 19 e If after the steps have been freed they do not re lock as an emergency measure Motor Error 3 screen is displayed This allows the step lock mechanism to be overridden and the game to be operated MOTOR ERROR 2 with the steps permanently in the free OPERATION STOP position WARNING It can be dangerous to operate the machine with the steps permanently free so the fault MUST be repaired as soon as possible MOTOR ERROR 3 DO YOU WANT TO OPERATE If the game is to be operated with the steps in the free condition press the decision but YES gt PUSH DECISION BUTTON ton If either the Left or Right Select button NO gt PUSH L R SELECT BUTTON is pressed the game will cease to function until the fault has been rectified
8. Assemble the Floor Safety Mat by fitting the securing plates from underneath the support brackets from the top and retaining the assembly together with the M6 Dome Nuts 2 Place the assembled Safety Mat into position under the Ski Step Assy 3 Retain the Safety Mat in position with the Hex Head Set Screws M8x20 ME Dome Nut Support Bracket Hex Head Se Dorew Max20 3 ADJUSTMENTS 3 1 Turning on the Power After the machine has been installed turn ON the power The power switch is located on the rear of the monitor cabinet 3 2 Adjustment Switches The Adjustment switches are located inside the coin door 1 Service Switch Press this switch to obtain game credits without incrementing the play meter 2 Test Switch Slide the test switch ON to enter test mode Test mode allows testing and the changing of game settings Refer to section 3 3 Test Mode page 9 COIN COUNTER LEFT PLAYER RIGHT PLAYER OW YQ TEST SERVICE TEST SERVICE im Service Bracket Page 8 DECISION BUTTON 3 3 Test Mode 1 Open the coin door and slide the test switch ON The menu screen will be displayed on the monitor 2 Select the test required by pressing the Left or Right Selection push button The selected test will blink 3 Enter the selected test by pressing the Decision push button Select EXIT to return the Menu Screen 4 After testing is completed
9. achine due to mis operation ensure that the voltage of the mains is 220 240volt AC Also in order to prevent possible electric shocks be sure that the machine is connected to the mains supply with a securely connected earthed plug WARNING If the location site of this machine has a polished floor it is recom mended that rubber pads are fitted under the level adjusters to pre vent the machine sliding on the floor So that customers are not injured by the movement of the Ski Tray ensure that there is at least 300mm separation between other machines or walls If two Alpine Racer machines are next to each other the space between them must be at least 600mm In order to gain access to the Power Supply and CPU assemblies make sure that the rear of the machine is separated from a wall or other machine by at least 500mm SAFETY ZONE 80cm A fl ff i Y ies ti KEEP CLEAR 1 10 Fa ae aaa Ai Page 2 This machine is designed for indoor use only Do Not install the machine in any of the following places Direct sunlight places with excessive humidity or dust places where there is water leakage near air conditioning or heating equipment places with excessively high or cold temperature 3 Places where it would be in the way of emergency exits or fire extinguishing equipment Page 3 Safety Mechanisms and Controls For safety this machine is equippe
10. ame Options 1 Select item 2 GAME OPTIONS on the menu screen to set the game options and related settings 2 Press Select L R to select the required item 3 Press the Decision button to adjust the settings Standard settings are displayed in green 4 Select EXIT and press Decision to return to the menu screen GAME OPTIONS DEFAULT IN GREEN GAME DIFFICULTY SOUND IN ATTRACT HI SCORE INITIALIZE AUTO HIGH SCORE INITIALIZE OFF EXIT SELECT L R BUTTON CHOOSE DECISION BUTTON CHANGE a Game Difficulty A easy to C hard c Hi Score Initialize d Auto High Score Initialize Page 11 3 3 3 1 0 Test 1 Select item 3 I O Test on the menu screen to test the switches motor and step adjust Press Select L R t to select the required item then press the Decision button to enter the test Select EXIT and press the Decision button to return to the menu screen I O TEST DIP 4 12345678 SWITCH TEST MOTOR TEST STEP ADJUST EXIT SELECT L R BUTTON CHOOSE DECISION BUTTON ENTER Shows condition of DIP SW 4 on the PCB In normal operation all switches are OFF If a switch is ON it will be displayed in red For testing Switches and Control Pots See 3 3 3 1 For testing the Step Lock Motor See 3 3 3 2 For initializing the Step Control Pots See 3 3 3 3 Page 12 3 3 3 1 Switch Test 1 Note Note Select Switch
11. connectors in to the cabinet slide the header back ensuring that it engages fully in to the retaining brackets at the front of the monitor cabinet 2 Fit the 2off M6x25 Hex Head Screws Spring and Flat washers to retain the Header Assembly to the cabinet Hex Head Screw M6x25 Header Assy Connectors Page 5 2 2 Connecting the Ski Assy to the Monitor Cabinet 1 Connect the connectors between the Ski Assembly and Monitor Cabinet 2 Push the Ski Assembly fully up to the monitor cabinet taking care not to trap any wires 3 Fit finger tight a joint bracket to each side using 4off Hex Head Set Screws M10x25 Spring and Flat Washers on each bracket Tighten fully all screws Hex Head Set Screw M10x25 Joint Bracket Joint Bracket Hex Head Set Screw noes Connectors Page 6 NOTE When the machine is fully assembled and in its final position lower the 10 level adjusters 4 on the monitor cabinet and 6 on the ski assy especially the two in front of the step assy with a spanner so that all castors are raised from the floor and the machine is level Tighten the lock nuts with a spanner to ensure that the level adjusters do not move T Level awe O Lock nut dw Se If this machine is installed on a smooth or shiny floor it is recommended that rubber slip mats be placed under the feet to prevent the machine moving during game operation 2 3 Fitting the Safety Mat 1
12. d with a locking mechanism for securing the steps when the machine is not being played The step locking mechanism is controlled as describe below After selecting the course the step lock is released before game start At game over the steps are locked If the steps are moved left or right while they are locking or unlocking the motor temporarily stops in order to prevent damage to the step lock motor When the steps are no longer being moved left or right the motor will restart To prevent damage from occurring do not move the steps while the motor is running When the machine is first turned ON the step lock mechanism is checked automatically by unlocking and re locking the steps If the step locking system fails an error message will be displayed on the monitor screen Refer to section 4 3 Handling Motor Errors Page 23 Unlocked step lree slate The restriction plale moves to the side at the steps and locks the steps Locked step Page 4 2 1 Fitting the Header Assembly The Header Assembly has a forward centre of gravity so it is important that at least two people are used to fit or remove the Header Assembly The fitting position of the Header Assembly is very high and it is important that a means of reaching the height safely without stretching is available e g steps step stools etc 1 Place the Header Assembly on to the monitor cabinet connect the connectors and pass the
13. ed item by Select L R buttons The selected item will blink 4 Pressing the Decision button will cause the selected value setting to blink 5 Pressing Select R will increase the value and Select L will decrease the value 6 Press Decision button to return to item select mode 7 When selecting the Request Song No test Select R button will increase the song number and Select L will decrease the number The Decision button will produce the sound of the song number selected Request Song 01 will produce a stereo sound test Sound will be produced from the speakers in the following order Left speaker Right speaker Both speakers 8 Press both Select L R buttons and Decision button together to return to Sound Test Menu from Request Song No Test Description Factory Set Set left speaker volume 00 Quietest 3F Loudest Set right speaker volume 00 Quietest 3F Loudest Select sound for testing Each number will produce a different sound 01 will generate a stereo test Page 15 3 3 5 Monitor Test 1 Select item 5 Monitor Test on the menu screen to set up and adjust the monitor 2 On entering monitor test the screen will display one of the following test patterns GRADATION PATTERN CROSSHATCH GREEN CROSSHATCH WHITE WHITE WINDOW H WHITE WINDOW M WHITE WINDOW L INTERLACE PATTERN VIEW ANGLE ADJUST CRT VIEW ANGLE ADJUST PROJECTOR FULL WHITE
14. initialize the controls Switch the test switch ON while pressing the service button The screen displays the SWITCH TEST screen with INITIALIZE COM PETED flashing Initialization is completed 4 Turn the test switch OFF to return to normal game mode SWITCH TEST TEST SW ON COIN SW ON SERVICE SW ON R SELECTION BUTTON On DECISION BUTTON ON L SELECTION BUTTON ON SWING 0000 0000 CENTER EDGE 0000 0000 CENTER INITIALIZE COMPLETED L R SELECT DECISION EXIT Page 18 4 2 Adjustment Method b 1 2 Slide the test switch ON Turn the power OFF and then back ON again Select I O TEST and press the decision button View Change Select STEP ADJUST and press the decision button The controls are now initialized After initialization is completed turn the test switch OFF The motor check begins If the motor still does not operate correctly there is a problem with the motor or switches and an error will be displayed on the screen Refer to section 4 3 below Handling Motor Errors for fault finding 4 3 Handling Motor Errors If a problem has occurred with the step lock motor an error message and method of rectifying will be displayed on the screen 1 a Errors at Start up When the power is turned ON the step lock motor is automatically checked The motor check first locks the steps frees them then locks them again Note Ensure that the test switch is OFF during motor check
15. played j Play Number Total number of game plays k Initialize Resets all ADS Data to zero 3 3 7 Others 1 Select item 7 Others on the menu screen 2 On entering Others the following screen will appear on the monitor OTHERS DEFAULT IN GREEN BACK UP MEMORY INITIALIZE NO EXIT L R SELECTION BUTTON CHOOSE DECISION CHANGE Page 17 4 INITIALIZATION Initialization must be performed before operation and after replacing the game PC board Rom or Step Controls If initialization is not performed the game will not function correctly During initialization ensure that the step edges are level 4 1 Adjustment Method a 1 When the power is turned ON the step lock motor is automatically checked The motor check first locks the steps frees them then locks them again Note Ensure that the test switch is OFF during motor check Also ensure that the steps are not touched during the motor check or the check will not be performed correctly 2 If the first lock is not completed within fifteen seconds from power up an error display screen appears MOTOR ERROR 1 If this happens refer to section 4 2 PLEASE STEP ADJUST Adjustment Method b and initialize the controls If the error display screen is still showing after the controls have been initialized refer to section 4 3 Handling Motor Errors After the motor check is successful the attract screen is displayed 3 To
16. that the customer can read it clearly If there is an error or problem with this machine operation must be stopped immediately and the problem rectified before further use Installation service adjustments and routine maitenance should be carried out by qualified personel only Warnings for Disassembly Installation Routine Maintenance and Troubleshooting DANGER Namco Ltd bears absolutely no responsibility for accidents or injuries resulting from unauthorized changes to this machine DANGER Ensure that the machine has been turned OFF before making adjustments or carrying out maintenance Also ensure only qualified personnel carry out maintenance or turn the power ON to this machine DANGER The power supply and inside the monitor will remain hot and have areas of high voltage even though the machine has been turned OFF and there is a possibility of burns or electric shock Be careful not to touch these areas DANGER In order to avoid injuries due to mis operation be sure that the voltage of the main power supply is within the prescribed limits Also to prevent possible electric shocks due to failure this machine MUST be fitted with a securely connected earthed plug Do not turn the power switch ON until the machine has been installed correctly 2 INSTALLATION Notes on Installation DANGER NEVER turn the power to the machine ON until installation has been completed DANGER In order to avoid injury or damage to the m
Download Pdf Manuals
Related Search