Mitel Superset 4150 User's Manual
Contents
1. 37 GETTING STARTED Introduction This guide provides instructions for using ACD supervisor and senior supervisor features on SUPERSET 4150 telephones Refer to your SUPERSET 4150 User Guide for a description of your telephone and non ACD features Some of the personal keys on your telephone are programmed as QUEUE STATUS keys or AGENT STATUS keys and one may be programmed as a SHIFT key You use these keys to monitor the status of agents and agent groups Supervisor or senior supervisor Supervisors monitor agent groups Senior supervisors monitor supervisors and possibly agent groups as well An agent group can be monitored by either a supervisor or a senior supervisor but not both As a supervisor or senior supervisor you can t answer ACD calls from your telephone One or more agent groups You ll have one QUEUE STATUS key programmed on your telephone for each of your agent groups If you only have one QUEUE STATUS key i e one agent group to supervise you can also have AGENT STATUS keys programmed on your telephone AGENT STATUS keys are not available on senior supervisor sets You have easy access to information A QUEUE STATUS key allows you to access information for an agent group and for the agents within that group An AGENT STATUS key displays information for individual agents within a group Once you ve accessed information you can display the same type of information for other agent gr2. AGENT WAIT TIME 00 46 NUMBER OF ACD CALLS ANSWERED 16 AVERAGE DURATION OF ACD CALLS 02 36 NUMBER OF NON ACD CALLS HANDLED 8 AVERAGE DURATION OF NON ACD CALLS 01 12 NUMBER OF TIMES AGENTS MADE BUSY 2 AVERAGE DURATION OF BUSY STATE 03 42 NUMBER OF ACD CALLS PUT ON HARD HOLD 4 AVERAGE HOLD DURATION OF ACD CALLS 00 51 Description Condensed queue status report Average waiting time for agents in group Number of ACD calls answered by group Average duration of ACD calls Number of non ACD calls made answered by group Average duration of non ACD calls Number of times agents made busy Average duration of make busy state Number of ACD calls put on hard hold Average duration of ACD calls on hard hold The condensed queue status report available to supervisors at key 0 consists of the following information displayed from left to right e Number of ACD calls answered by the group e Number of abandoned ACD calls e Number of agents logged in e Number of times agents made busy e Number of non ACD calls handled by the group The report available to senior supervisors at key 0 consists only of NUMBER OF AGENTS LOGGED IN and not the condensed report that is available to a supervisor 33 Agent Status Reports ONOUIP OD OR ey Sample Display AVERAGE WAITING TIME 01 55 NUMBER OF ACD CALLS ANSWERED 25 AVERAGE DURATION OF ACD CALLS 02 14 NUMBER OF NON ACD CALLS HANDLED 3 AVERAGE DURATION OF NON ACD CALL
3. the AGENT softkey see Scrolling through Reports in the previous section Agent Status at a Glance The indicator beside an AGENT STATUS key shows the current status of the agent Refer to Table 5 in the Reports and Indicators section for information on how to interpret the agent status indicator flash rates Displaying an Agent s Status The AGENT STATUS key allows you to display an agent s current status To display information about an Agent s status 1 Press an AGENT STATUS key The agent s identification number name and status appears in the display An agent can be in any one of the following states LOGGED OUT agent is logged out NO CALLS WAITING agent is waiting for an ACD call ON ACD CALL agent is on an ACD call AFTER CALL WORK agent is completing work from an ACD call work timer NON ACD CALL OR IN DND agent is on a non ACD call ACD CALL ON HOLD agent has an ACD call on hold MAKE BUSY agent s telephone is in make busy state 2 Press the Next Agent or Prev Agent softkey to display the status of other agents in your group 3 Press SUPERKEY to exit 21 Displaying Agent Status Reports You can display agent status reports by pressing keys on the dial pad To display agent status reports 1 Press AGENT STATUS key 2 Press a key on the dial pad The report associated with that key is displayed Refer to Table 4 in the Reports and Indicators section for a list of the available agent r
4. ACD SUPERVISOR SENIOR SUPERVISOR User Guide for the Superset 4150 Telephone MITEL it s about YOU DUE TO THE DYNAMIC NATURE OF THE PRODUCT DESIGN THE INFORMATION CONTAINED IN THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE MITEL CORPORATION ITS AFFILIATES AND OR ITS SUBSIDIARIES ASSUME NO RESPONSIBILITY FOR ERRORS AND OMISSIONS CONTAINED IN THIS INFORMATION TM Trademark of MITEL Corporation O Copyright 2004 MITEL Corporation All rights reserved Contents GETTING STARTED o een ese 5 Ho dls und asien heine 6 Legging OUt srren ee Rn 9 QUEUE STATUS Queue Status at a Glance ia ae 13 Displaying a Group s Queue Status 13 Displaying 14 Scrolling Through Reports as 15 ADOULING SHIFT OY nes een 16 AGENT STATUS About Agent Status Keys 21 Agent Status at a Glance are 21 Displaying an Agen s Salle 21 Displaying Agent Status 22 ADOLUEINS SHIIEKOY 23 AGENT MONITORING About Agent Monitoring ru nee 27 Agent Hei as 29 REPORTS AND INDICATORS Queue Status Gina ein 33 Agent Status Reports vidas ee 34 Status Indicators 34 ADDITIONAL FEATURES Some Additional
5. LD key The status indicator of the held call flashes 2 Toretrieve the held call press the line select key next to the flashing status indicator Transferring a call 1 While on a call press the Trans Conf softkey 2 Dial the number of the third party 3 Hang up Or Wait until the called party answers and then introduce the caller being transferred After introducing the caller hang up If you receive busy tone or no answer press Back to Held softkey to return to the original call Setting up a 3 party conference 1 While on a call press the Trans Conf softkey 2 Dial the number of the third party 3 When the called party answers introduce the conference 4 Press the Conference softkey to form the conference Making a directed page 1 Press the Direct Page feature key 2 Dial the extension number or press the DSS key of the party being paged 3 Broadcast your message 37 Notes 38 MITEL TM Trademark of Mitel Networks Corporation Copyright 2004 Mitel Networks Corporation All rights reserved
6. Refer to Table 5 in the Reports and Indicators section for information on how to interpret the queue status indicator flash rates Displaying a Group s Queue Status A QUEUE STATUS key allows you to display an agent group s queue status 1 Press a QUEUE STATUS key The following information is displayed a the agent group number and NAME b the NUMBER OF AGENTS logged in to the group the longest time that a call has been in the queue LONGEST CALL d the number of CALLS WAITING in the queue 2 Press another QUEUE STATUS key to display queue information for another agent group Or Press SUPERKEY to exit 13 Displaying Reports You can display queue status reports for your agent group Refer to Table 3 in the Reports and Indicators section for a list of the available queue status reports If you re responsible for more than one agent group you can also access agent status reports using the Agent softkey Refer to Table 4 in the Reports and Indicators section for a list of the available agent status reports To display queue status reports 1 Press a QUEUE STATUS key 2 Press a key on the dial pad The report associated with that key is displayed 3 Press SUPERKEY to exit To display agent status reports 1 Press a QUEUE STATUS key 2 Press the Agent Status softkey The status of the first agent in the group is displayed The Agent Status softkey is only available if you supervise more than one grou
7. S 01 27 NUMBER OF TIMES AGENT MADE BUSY 4 AVERAGE DURATION OF BUSY STATE 03 42 NUMBER OF ACD CALLS PUT ON HARD HOLD 5 AVERAGE HOLD DURATION OF ACD CALLS 00 32 Average duration of ACD calls on hard hold Table 4 Agent Status Reports Description Status Indicators Average waiting time for agent Number of ACD calls answered by agent Average duration of ACD calls Total non ACD calls made answered by agent Average duration of non ACD calls Number of times agents made busy Average duration of make busy state Number of ACD calls put on hard hold The following table illustrates the behavior of line status indicators Key Prime Line Queue Status Agent Status Shift Table 5 Status Indicators Status Idle Busy No calls in queue Calls waiting before 1st threshold time period Calls waiting between 1st and 2nd threshold time periods Calls waiting longer than 2nd threshold time period Calls have overflowed Agent logged out Agent logged in no calls waiting Agent telephone made busy Agent on ACD call Agent on non ACD call Holding an ACD call After call work timer Shift not activated Shift activated 34 Indicators Off On Off On Slow flash Pulsed flash Fast flash Off Pulsed flash Fast flash On Slow flash On On Off On ADDITIONAL FEATURES Some Additional Features Instructions for performing commonly used features are given below Placing a call on hold 1 Press the red HO
8. cator beside the SHIFT key turns on when the shift function is activated An example If you re supervising nine agent groups but only have four QUEUE STATUS keys programmed on your telephone you can press the SHIFT key to access the other five groups 1 Press the SHIFT key once QUEUE STATUS keys 1 2 3 and 4 now represent groups 5 6 7 and 8 2 Press the SHIFT key again Key 1 now represents group 9 Keys 2 3 and 4 are meaningless 3 Press the SHIFT key once more Keys 1 2 3 and 4 once again access groups 1 2 3 and 4 16 Table 1 further illustrates this example Key Number 2 3 4 Table 1 SHIFT Key Operation for Queue Status With No Shift Agent Group 1 Agent Group 2 Agent Group 3 Agent Group 4 Need a reminder After 1st Shift Agent Group 5 Agent Group 6 Agent Group 7 Agent Group 8 After 2nd Shift Agent Group 9 none none none If you forget how many times you have pressed the SHIFT key 1 Press SUPERKEY 2 Press SHIFT The shift count appears in the display 17 After 3rd Shift Agent Group 1 Agent Group 2 Agent Group 3 Agent Group 4 AGENT STATUS About Agent Status Keys AGENT STATUS keys allow you to monitor the current status of individual agents You will only have agent status keys programmed on your telephone if you supervise one agent group If you supervise more than one agent group you access agent status information from a QUEUE STATUS key using
9. ce if for example a caller is abusive or threatening If you receive an agent s request for help you may want to monitor the call or perhaps have the conversation recorded If you initiate a monitoring session in response to a help request the agent is always alerted when the session begins Responding to a HELP request When an agent requests HELP your telephone rings and HELP followed by the agent s identification number and extension number appears in your telephone display To respond 1 Lift the handset to monitor the call 2 Press Trans Conf softkey to form a conference with the two parties Or Press Exit to end the monitoring session If your telephone is busy Your telephone rings briefly and HELP followed by the agent s identification number is displayed NOTE The monitoring session is cancelled automatically when the call is ended or when you go on hook If you receive a request for help from an agent whom you are currently monitoring HELP followed by the agent s identification number appears in your telephone display indicating that the agent needs assistance If a request for help is sent to another supervisor from an agent whom you are currently monitoring you ll continue to monitor while the other supervisor receives busy tone 29 REPORTS AND INDICATORS ey Queue Status Reports Table 3 Queue Status Reports Sample Display CONDENSED STATUS REPORT 16 2 10 2 8 AVERAGE
10. ect key To hang up e Press the Hang Up softkey Handling Calls with a Headset with Feature Control Switch To answer a call when Auto Answer is disabled e Quickly press and release the Control Switch To mute the headset microphone Headset with Feature Control Switch only e Press and hold the Control Switch To hang up e Quickly press and release the Control Switch Logging In Out Your system administrator should have assigned you an identification number Your identification number allows you to access the ACD system Check with your system administrator if you don t have an identification number Note that you can t program your telephone s personal keys while you re logged in To log in 1 Enter the Login Logout access code 2 Enter your identification number If you ve logged in successfully you hear dial tone and ACD LOGIN appears in your telephone display If you re unsuccessful you hear error tone continuous beeps and INVALID NO ACCESS or INVALID KEY appears on your telephone display Contact your system administrator if you can t log in 3 Press SPEAKER To log out 1 Enter the Login Logout access code If you hear dial tone you have logged out successfully ACD LOGOUT appears in the display 2 Press SPEAKER QUEUE STATUS Queue Status at a Glance The indicator beside a QUEUE STATUS key shows the current status of the call waiting queue for the associated agent group
11. eports 3 Press the Next Report or Prev Report softkey to scroll through the agent status reports 4 Press the Next Agent or Prev Agent softkey to display the same report for other agents in your group 5 Press another AGENT STATUS key Or Press SUPERKEY to exit 22 About the Shift Key If you re responsible for more agents than there are AGENT STATUS keys on your telephone you can use the SHIFT key to access the other agents The SHIFT key allows you to access more than one agent from a single AGENT STATUS key The status indicator beside the SHIFT key turns on when the shift function is activated An example If you re supervising nine agents but only have four AGENT STATUS keys programmed on your telephone you can press the SHIFT key to access the other five groups 1 Press the SHIFT key once Keys 1 2 3 and 4 now represent agents 5 6 7 and 8 2 Press the SHIFT key again Key 1 now represents agent 9 Keys 2 3 and 4 are meaningless 3 Press the SHIFT key once more Keys 1 2 3 and 4 once again represent agents 1 2 3 and 4 Table 2 further illustrates this example Table 2 SHIFT Key Operation for Agent Status Key Number With No Shift After 1st Shift After 2nd Shift After 3rdShift 1 Agent 1 Agent 5 Agent 9 Agent 1 2 Agent 2 Agent 6 none Agent 2 3 Agent 3 Agent 7 none Agent 3 4 Agent 4 Agent 8 none Agent 4 Need a reminder If you forget how many times you have pressed the SHIFT key 1 Pr
12. ess SUPERKEY 2 Press SHIFT The shift count appears in the display 23 AGENT MONITORING About Agent Monitoring This feature allows you to monitor an agent s conversation either with or without the agent s knowledge Typically you use this feature to monitor an agent s handling of ACD calls Are your agents notified Your system may be programmed to notify agents when their calls are being monitored In this case the agent hears a beep when you begin monitoring the call If the agent has a display telephone your name and extension number appear in the agent s display for the duration of the call If your system is not programmed to notify agents when their calls are being monitored the agents do not hear a beep and the agent s telephone display does not indicate that monitoring is taking place You can just listen or you can join the conversation When monitoring an agent you can listen to the conversation but you can t speak to either the agent or the caller Anything you say while in call monitoring mode is not heard by either the agent or the caller However you can join the conversation by forming a 3 party conference 27 A few conditions Only on e supervisor can monitor an agent at a time If you try to monitor an agent who is already being monitored you receive busy tone and BUSY appears in your display If the agent puts the caller on hold hard hold or temporary hold anytime during the conversation
13. oups or agents by pressing other QUEUE STATUS keys or AGENT STATUS keys You can exit an information display at any time by pressing SUPERKEY Using a Headset Note Your system administrator may have enabled full time headset operation on your telephone Telephones with full time headset operation enabled must be operated only with headsets A headset can be used either in regular answer mode or with the Auto Answer feature programmed Most headsets are installed using the same jack that the handset plugs into MITEL s Headset with Feature Control Switch plugs into the dedicated headset jack the jack nearest the front of the telephone To Install a Headset no feature control switch To install the headset for your use perform the following tasks 1 When the telephone is not in use lift the handset from the cradle and carefully turn the telephone upside down Unplug the handset cord where it connects to the telephone Plug in the headset cord in the same place Store your handset in a safe place To return to handset operation perform the following tasks 1 When the telephone is not in use lift the handset from the cradle and carefully turn the telephone upside down Unplug the headset cord where it connects to the telephone Plug in the handset cord in the same place Set the telephone upright and return the handset to the cradle Store your headset in a safe place To Install a Headset with Feature Cont
14. p 3 Press a key on the dial pad The report associated with that key is displayed 4 Press SUPERKEY to exit 14 Scrolling Through Reports You can also scroll through queue status reports and agent status reports To scroll through group status reports 1 Press a QUEUE STATUS key The number and name of the group associated with the report data appears in the top line of the display Press a key on the dial pad The report associated with that key is displayed Press the Next Report or Previous Report softkey to scroll through the queue status reports To scroll through agent status reports 1 Press a QUEUE STATUS key 2 Press the Agent Status softkey The identification number name and status of the first agent in the group is displayed The Agent Status softkey will only be available if you supervise more than one agent group Press a key on the dial pad The report associated with that key is displayed Press the Next Report or Prev Report softkey to display different reports for the same agent Or Press the Next Agent or Prev Agent softkey to display the same report for other agents in the group 15 About the SHIFT Key If you re responsible for more agent groups than there are QUEUE STATUS keys on your telephone you must use the SHIFT key to access the other agent groups The SHIFT key allows you to access more than one agent group from a single QUEUE STATUS key The status indi
15. rol Switch IMPORTANT NOTE MITEL s Headset with Feature Control Switch must be installed in the dedicated headset jack the jack nearest the front of the telephone Installation will disable your handset microphone Disconnecting the headset at the jack or at the quick disconnect plug restores handset operation To install the headset for your use perform the following tasks 1 When the telephone is not in use lift the handset from the cradle and carefully turn the telephone upside down 2 Plug the headset cord into the headset jack the jack nearest the front of the telephone 3 Set the telephone upright and return the handset to the cradle To return to handset operation perform the following tasks 1 When the telephone is not in use lift the handset from the cradle and carefully turn the telephone upside down 2 Unplug the headset cord where it connects to the telephone 3 Set the telephone upright and return the handset to the cradle 4 Store your headset in a safe place Enabling Disabling Headset Operation To enable or disable headset operation for headsets on telephones that are not programmed for full time headset operation e Press the HEADSET feature key e Connect or disconnect the headset at the quick disconnect plug Headset with Feature Control Switch only Handling Calls with a Headset no Feature Control Switch To answer a call when Auto Answer is disabled e Press the flashing Line Sel
16. you are removed from the call and your monitoring session ends Note that while you are monitoring an agent you can t make or receive calls Anyone who calls your telephone while you are monitoring an agent receives busy to ne The caller can telephone a callback but is unable to camp on or override your monitoring session If you want to place an outgoing call you must first cancel your monitoring session To monitor an agent 1 2 NOTE Enter the ACD Monitor feature code Enter the agent s identification number If the agent is on an ACD call you begin monitoring the call INTRUDING followed by the agent s extension number appears in your display for example INTRUDING 1234 If the agent is waiting for an ACD call you hear busy tone and the agent s extension number followed by the words IS IDLE are shown in your telephone display for example 1234 IS IDLE Press the Trans Conf softkey to form a 3 party conference with the agent and the calling party Or Press Exit to end the monitoring session If you wish to continue monitoring an agent after exiting the conference you must set up the monitor again If during a monitoring session the agent puts the call on hold transfers the call or ends the call DISCONNECTED appears in your telephone display and the monitoring session is terminated 28 Agent Help An agent can request your assistance during an ACD call An agent might summon your assistan
Download Pdf Manuals
Related Search