Miele CVA4075 User's Manual
Contents
1. A combination with other Miele built in appliances is possible If the machine is installed in combination with other appliances it should be installed with a protective base between the appliance and the unit exception installation with a built in plate warmer A special display cabinet is also available from your dealer or Miele as an installation option 59 Installation Installation Make sure power is not supplied to the appliance while installation or maintenance work is performed Disconnect the power supply to the work area by unplugging the unit tripping the circuit breaker or removing the fuse The coffee System must be installed into cabinetry before being used m Unscrew the height adjustable feet on the underside of the machine about 1 16 2 mm m Push the appliance all the way back into the cabinet and center it If necessary level the unit with the four height adjustable feet The feet can be turned out up to 3 8 10 mm 60 m f your cabinet has 3 4 19 mm side walls drill four holes for the mounting m Center the unit and turn the screws a little bit in and then out again m Take the unit out of the niche and drill four holes at the screw markings 1 16 2 mm diameter 3 16 4 5 mm m Connect the appliance to a cold water supply m Plug the appliance into the electrical outlet m Push the appliance into the niche m Open the door and partially ti2. CAPPUCCINO m Select Hot water from the main menu m Hot water is dispensed Select Stop to stop the flow m Let the hot water sit for a moment to pre warm the cup then empty the Cup 14 Adjust the dispenser height Depending on the cup height the coffee dispensers can be adjusted so that the coffee and espresso have a shorter distance to the cup do not cool and have a better crema C m Pull the coffee dispenser slowly up or down Making coffee Espresso and coffee made Preparing two cups at the same time from coffee beans m Set a cup under each coffee m Set a cup under the coffee dispenser dispenser m Select Espresso or Coffee dispensers at the same time The coffee system makes two portions m Select Espresso or Coffee of espresso or coffee with a few seconds in between The machine grinds the beans and pre brews the coffee if On is selected Keep the cups under the dispenser under Pre brewing The selected until the main menu shows in the beverage is dispensed display Do not open the door during brewing The machine will be damaged Canceling m Select Stop to cancel the process The portion sizes for espresso coffee and cappuccino can be set individually See Setting the serving sizes Making coffee Espresso and coffee made from ground coffee After filling the funnel with ground coffee see Filling water beans or
3. The machine will turn on every day at the selected time If the Rinse function was set to On the lines will be rinsed when the machine is turned on If the machine is turned on automatically three times and no beverages were dispensed the machine will no longer turn on automatically The programmed times stay saved and will be activated again when the machine is manually turned on the next time This safety measure is designed so that the machine does not turn on every day if the setting was not canceled before a longer time of absence e g vacationing Settings Turn off after The machine will turn off automatically to save energy after a programmed period of time Time periods between 15 minutes and 6 hours can be selected If the machine is not used after dispensing beverages it will turn off after the selected time m Select Turning off after For example a 0 15 display means that the unit will turn off after 15 minutes of no use m Set the hour when the appliance should turn off by selecting or m Switch to Minutes and repeat m Select OK to save the selection The machine will turn off after the desired time If rinsing is set to On and a beverage was already dispensed the lines will be automatically rinsed before turning off Turn off at A specific time of day can be set to turn the coffee system off m Select Turning off at m Set the hour when the appliance
4. Instead of coffee only water is dispensed The beans may have gotten stuck The ground coffee funnel cover was opened and closed and a preparation with ground coffee was selected but no ground coffee was inserted The coffee system switches automatically back to beans use after the preparation Pull the bean container out and push it back in The drip tray is empty but a message to empty it is displayed The metal contacts are soiled or wet Check if the drip tray is inserted correctly 50 Clean and dry the contacts Insert the drip tray as described in Cleaning and Care Drip tray Turn the machine off and on again with the main switch f the message still appears contact Technical Service Frequently asked questions The machine does not rinse when turned on although the automatic rinse feature is set to On When the machine is still at a temperature of about 140 F 60 C The machine will not rinse when it s too hot The water dispensing stops when programming the serving size There was not enough water in the Fill the water tank before programming tank if the unit is not plumbed the serving size The dispensed water amount will not be saved f the maximum water amount is dispensed the water flow stops automatically The maximum water amount is saved Water is in the waste unit This is not a fault Thi
5. select Care m Select Descaling and then OK The display prompts the user through the single steps of the descaling process Follow the prompts If the descaling is started while the machine is still hot the appliance will cool down for 10 minutes before the descaling begins The descaling process cannot be canceled once OK is selected The process now needs to be completed This is a safety feature to ensure the process will be completed It is important for best results and the longevity of the machine 45 Descaling the appliance m The display will prompt you through the next steps to fill the descaling agent into the water tank take the water tank out fill the water tank with fresh lukewarm tap water to the mark S If not filled to the mark the descaling will be canceled prematurely and incomplete Dissolve two of the enclosed descaling tablets in the water Close the water tank and insert into position m Set the descaling funnels under the coffee dispensers Set the funnel in the holes of the drip tray so the dispensed liquids are guided in the drip tray During the descaling process the descaling solution will flow from the hot water and coffee dispensers The machine rests briefly to allow the solution to take affect before dispensing again 46 m Please fill the water tank with tap water to the descaling mark and reinsert it Take the water tank out rinse o
6. with the right touch controls to select the minutes m Select OK The time of day is saved Clock display size The size of the clock display can be adjusted The options are normal or large m Select Size The selected size is highlighted in the display m Select Size until the desired size is highlighted m Select OK to save the selection 12 or 24 hour clock The clock display can be set to the 12 or 24 hour clock m Select the respective touch control The selected display is highlighted m Select OK to save the selection Clock display on off The clock can be displayed or turned off If the display is turned on the time of day is displayed when the machine is turned off If the option is set to off the display turns off after 60 seconds m Select Clock display The selected display is highlighted m Select OK to save the selection 21 Settings Timer Setting a timer SETTINGS P gt 4 back a CARE USER PROFILES m Select Settings SETTINGS lt LANGUAGE P GRIND AMOUNT gt PRE BREWING gt more gt lt CLOCK TIMER m Select Timer m Select Setting 22 Turn on at A specific time of day can be set to turn the machine on e g for breakfast m Select Turning on at m Set the hours to when the appliance should turn on by selecting or m Switch to Minutes and repeat m Select OK
7. and then OK The appliance is now unlocked and ready for use Settings Water hardness The hardness of the water used in the coffee system must be determined and programmed into the appliance The water hardness will determine how frequently the unit must be descaled to maintain the coffee system properly The machine monitors the volume of water passing through it in conjunction with the hardness of the water and will indicate when descaling is necessary Your local water authority can tell you the hardness of your tap water or you can measure it yourself using the enclosed test strip m Dip the test strip in the water for 1 second and shake off any remaining water The result is visible in about 1 minute If the water hardness is greater than 40 gr gal the water must be descaled more often than displayed Calcium will build up faster than at a lower water hardness and may damage the machine To set the correct water hardness SETTINGS P gt lt back a CARE USER FROFILES m Select Settings and then more twice m Select Water hardness m Select the center touch control to set the water hardness harder right or softer left m Select OK to save the selection 29 Settings User profiles Up to 10 different user profiles can be entered to accommodate different tastes i e different grind amounts temperature pre brewing portion sizes 30 Creating a user profil
8. ground coffee Filling ground coffee the display shows L Did you fill ground coffee and ET VOU Want to prepare it 4 Ho Ves gt m Select Yes Select No if no ground coffee is filled in the funnel Otherwise the coffee System assumes that ground coffee is in the machine and dispenses only water next time coffee is made m Set a cup under the coffee dispenser The drink is dispensed through both dispensers at the same time m Select Espresso or Coffee The coffee system brews the espresso or coffee and the drink is dispensed Do not open the door during the brewing process It will damage the machine The unit will switch automatically back to brewing with beans after preparation Canceling m Select Stop to cancel the process 16 Preparing two cups at the same time When using ground coffee only one portion at a time can be prepared The unit uses the whole portion of ground coffee which was filled in the funnel to prepare one drink Making coffee Cappuccino and milk froth When using for the first time or using after descaling The lines were completely drained before the unit left the factory They will also be drained when the machine is descaled Before preparing cappuccino or froth the lines must be filled with water m Set a cup under the cappuccino dispenser m Select Milk froth The intake hose takes in water from the tank and fills the lines with water A
9. should turn on by selecting or m Switch to Minutes and repeat m Select OK to save the selection The machine will turn off at the selected time m Select Clear until the display shows the desired menu If rinsing is set to On and a beverage was already dispensed the lines will be automatically rinsed before turning off 23 Settings Activating a timer 4 back lt CARE 4 USER PROFILES m Select Settings SETTINGS SETTINGS 4 LANGUAGE P lt CLOCE TIMER m Select Timer 24 GRIND AMOUNT gt PRE BREWING more The timer function Turning on at or Turning off at can be activated or deactivated m Select Activate m Select On to activate the desired function Select Off to deactivate the desired function The selected times in the function will stay stored in the memory m Select OK to confirm the setting Settings Grind amount The grind amount can be set depending on the coffee type between 0 2 ounces and 0 5 ounces 6 14 grams The more the coffee is ground the stronger the espresso coffee or cappuccino will be The crema is also influenced by the grind amount If the crema has an even but white yellow coloring the ground amount might be too little If the crema is dark brown to black in color on the one side and almost white on the other side the grind amount might be too much m S
10. small amount of water runs from the froth dispenser Prompts to clean the froth dispenser appear in the display m Confirm by selecting OK m Once the machine stops select Milk froth again The froth dispenser dispenses steam and the lines are filled with water m Select Clear to get back to the main menu The coffee system is ready to use Making coffee Cappuccino To prepare a cappuccino you need a large ceramic or porcelain cup and a small mug supplied of milk The best milk froth is achieved with cold milk Only one cup of cappuccino can be prepared at a time because of the milk frothing process m Set the mug of milk under the intake hose and the cup under the froth dispenser m Select Cappuccino The milk is frothed into the cup At the same time the beans are ground Select Stop to cancel the milk frothing m Once the milk is frothed set the cappuccino cup under both dispensers and select OK The cappuccino will be prepared m Select Stop when enough espresso has been prepared 18 Milk froth If you need additional milk froth prepare cold skim milk in a stainless steel mug which narrows towards the top m Set the supplied glass mug with milk under the intake hose and the stainless steel mug under the froth dispenser m Select Milk froth The milk is frothed into the stainless steel mug m Select Stop to cancel the milk frothing After
11. Before discarding an old appliance unplug it from the outlet cut off its power cord and remove any doors to prevent hazards Plumbing The machine must be connected to the water supply in accordance with local and national regulations The water being used should have the drinking water standards of the respective country where the machine is used All units and systems used to deliver the water to the coffee system must conform with the requirements of the respective country The machine is designed to be plumbed to a cold water connection The machine can be connected without a non return valve The on site water line must have a water valve to turn the water off if needed If not present have a water valve installed by a licensed plumber The water faucet must be accessible after installation Water pressure on site Minimum 14 5 psi Maximum 145 psi if higher install a pressure reduction valve Suitable 1 4 tubing or copper piping must be supplied for plumbing To ensure the best coffee quality the maximum length of the tubing or copper pipe should not exceed 4 ft 11 1 5 m If too much water remains in the tubing the coffee quality could be affected Connection to the water supply m Disconnect the machine from the electrical supply m Remove the water connection cover at the lower rear side of the coffee machine m Screw the supplied brass compression fitting with the 34 end
12. Select Rinse automatic RINSE AUTOMATIC On The second line shows if the rinse automatic is turned on or off m Select On or Off and then OK to save the setting It is recommended to set this option to On so that the rinse process cannot be forgotten Settings Steam system The appliance has two heating systems They allow for independent preparation of froth cappuccino or espresso coffee The second heating system can be turned off to save energy during the heating phase e g if froth is not prepared very often When the steam system is turned off and froth or cappuccino is selected the unit must heat up first to produce steam As long as the coffee system was not completely turned off the steam System is on The steam system is turned on by default To turn the steam system off m Select Settings m Select Steam system The second line shows if the steam system is turned on or off m Select On or Off and then OK to save the setting Lighting Lighting sets the type of light used when the appliance is turned on The lighting can be turned on off automatically or dimmed to the desired brightness The dimming functions can be set independently for the upper or lower lighting N Caution Do not look directly or with an optical instrument into the lighting Laser To change the lighting m Select Settings and then more m Select Lighting m Select On during use
13. The contrast or brightness of the displays are too low high Adjust the display contrast brightness See Settings Display The display remains dark The unit has no power The main switch is turned off The machine is not plugged in Check that the fuse had not blown or is defective If the fuse has blown contact Miele s Technical Service Department 47 Frequently asked questions The unit suddenly turns off Is the machine programmed to The machine goes into standby mode switch off after a programmed when not used for a programmed time time See Settings Timer Turning off after The water temperature could be to The unit is locked until the water has high cooled There could be pebbles within the Call Miele s Technical Service coffee beans The unit shuts off Department after 20 secs to avoid damages Is the machine plugged in Plug in the machine The door cannot be closed Check if all containers are properly inserted The door is hard to open and close and the gasket of the connector is pulled off Adjust the door with the door hinges See Installation Adjusting the door hinges The gasket of the coffee dispenser connector is damaged and leaking The gasket is worn Change the gasket with a new one supplied Check the door Is the alignment Adjust the door with the door hinges off f
14. This appliance complies with current safety requirements Improper use of the appliance can cause personal injury and material damage This appliance is for household use only to prepare espresso cappuccino and coffee Do not use appliance other than for its intended use Any other use could be dangerous The manufacturer cannot be held responsible for damage caused by improper use of the appliance Electrical safety P Before connecting the appliance to the electrical supply make sure that the voltage and frequency listed on the data plate correspond with the household electrical supply If in doubt consult a qualified technician P The appliance must be properly installed before operation to ensure that no electrical components are accessible Ensure that power is not supplied to the appliance while installation work repairs or maintenance is performed P Be certain your appliance is properly installed and grounded by a qualified technician To guarantee the electrical safety of this appliance continuity must exist between the appliance and an effective grounding System It is imperative that this basic safety requirement be met If there is any doubt have the electrical system of the house checked by a qualified electrician The manufacturer cannot be held responsible for damages caused by the lack or inadequacy of an effective grounding system P Do not use an extension cord to connect the appliance
15. Use handles or knobs P Rinse the lines and the froth dispenser and clean the unit before the first use P To avoid injuries allow the coffee system to cool before cleaning or putting on and taking off parts Turn the machine off at the main switch when not in use and before cleaning P When using the coffee system with the water tank only fill the water tank with cold fresh tap water Warm or hot water or any other liquids may damage the machine P The water should be changed daily to prevent bacteria or mold growth P Do not use mineral water Mineral water leads to heavy calcium buildup in the machine that can damage the unit P Do not fill anything but coffee beans into the beans container Do not fill ground coffee in the beans container it will damage the grinding unit P Do not fill anything but ground coffee or a cleaning tablet for the brew unit in the funnel for ground coffee otherwise it will get damaged P Sugar can damage the appliance Caramelized or otherwise pre treated coffee beans or other sugar containing beverages must not be put in the machine IMPORTANT SAFETY INSTRUCTIONS P Never place a cup with an alcohol coffee mixture underneath the coffee dispenser Plastic parts of the unit could catch fire P The hot water and steam dispensed could cause scalding These functions must be used carefully Never hold any parts of the body under the steam nozzle or the hot
16. can mold if there is water in the waste unit from the rinse process Line the waste unit with a paper towel to make for easier cleaning m Pull the waste unit out m Wash the waste container in the dishwasher or by hand with hot water and liquid dish soap and dry with a soft cloth m Clean the niche of the waste unit in the machine m Push the waste unit completely into the machine Cleaning and Care Drip tray m Wash the drip tray in the dishwasher The trip tray contains a sensor which A CUTS WIMA y 2 Pune causes the display to show when the BISRISORD ther dry witi a Som cioth k E d d in be empied Take care that the metal contacts at ERUIT CALY the back of the drip tray are clean Remove the drip tray after the final and dry If the contacts are soiled or Hinge where more Water Mine from wet the unit cannot detect when the the lines drip tray is full and needs to be emptied m Open the door and pull the drip tray out The drip tray contains a grid to avoid spilling during transport m Push the drip tray with grid along the right edge all way in the machine m Close the door 37 Cleaning and Care Drip catch with metal insert m Take out and clean the drip catch and metal plate 38 Bean container The bean container must be cleaned by hand with hot water and liquid dish soap m Pull the bean container out and push the lid back m Wash the bean container by hand with ho
17. coffee system must be descaled regularly The appliance will display a reminder message to descale and will eventually lock if not descaled The display will show Please descale the coffee system Remaining numbers of servings 50 This message will now appear after each preparation If the counter has elapsed to O the appliance will be locked Select Descaling to start the descaling immediately The descaling takes about 20 minutes If you want to continue at a later point in time turn the unit off The appliance can only be used again once descaling is performed Only use the enclosed descaling tablets for descaling They are specially developed for the coffee System to optimize the descaling The descaling tablets can be purchased from Miele Other agents may damage the machine and affect the taste of coffee and hot water The machine could also be damaged Use the supplied descaling funnel to protect the appliance front from the descaling agent Clean up any descaling spills immediately to avoid damage to the appliance front Thoroughly clean the water tank and the drip tray of descaling residues Descaling For descaling purposes the machine automatically switches from the plumbed function to the water container m o descale the unit before it is heated up select Descaling in the main menu m To start the descaling process before prompted by the machine e g because of very hard water
18. dispenser into the Take care that the raised parts see machine from underneath CD and arrow point downwards and turn the cover above the spout to the right Do not use the machine without the froth dispenser installed Steam will spit uncontrollably Danger of scalding and machine damage m that the marks are lined up 43 Cleaning and Care Exterior The front of the appliance can be cleaned with a sponge and a solution of warm water and non abrasive liquid dish soap Dry with a soft cloth Only use a slightly damp sponge when cleaning the controls Water could penetrate into the electronics and cause damage Abrasive cleaning agents glass cleaning agents all purpose cleaners thinner or ammonium cleaners should not be used on the machine They will damage the surface Wipe any spills from descaling immediately 44 Stainless steel surfaces Stainless steel surfaces can be cleaned using a non abrasive stainless steel cleaner available from Miele To help prevent soiling a conditioner for stainless steel can also be used Apply sparingly and with even pressure Stainless steel colored controls Clean the buttons and knobs with a sponge and a solution of warm water and liquid dish soap These controls may become discolored or damaged if not cleaned regularly Do not use a stainless steel cleaner on the knobs or buttons Clean immediately after use Descaling the appliance The
19. water dispenser The machine must never be used to clean objects P Do not use the machine when the froth dispenser is removed Danger of scalding with hot steam P Never use a steam cleaner to clean the appliance Pressurized steam could damage electrical components and cause a short circuit P The appliance must be descaled regularly with the supplied descaling tablets In areas with very hard water the machine may need to be descaled more often The manufacturer cannot be held responsible for damages resulting from insufficient descaling P Only use the descaling tablets provided by Miele Take care to use the correct mixture of water and descaler otherwise it may cause damage P Depending on the fat content of the coffee the brew unit may clog Clean the brew unit every 200 cups with a cleaning tablet The display shows a respective request P Dispose of the coffee waste in a trash can not in the sink The sink could get clogged P Do not hang lean sit or place heavy items on the door The machine could be damaged P The use of accessory attachments not recommended by the appliance manufacturer may result in fire electric shock or injury to persons SAVE THESE INSTRUCTIONS Guide to the machine Front view 1 D Touch controls lowest control On Off button Bottom lighting Display Plastic drip tray Touch controls Metal drip tray lowest control Clear button Cof
20. Miele Operating and Installation Instructions Coffee System with convertible water connection CVA 4075 To prevent accidents en US CA and machine damage read these instructions before installation or use M Nr O7 194 220 Contents IMPORTANT SAFETY INSTRUCTIONS Luuuuiis isses ls leise 4 Guide to the machine 0 0 0 0 leen 8 First steps touSe 6 6 eii eee 10 Filling water beans or ground coffee 0005 11 Filling the Water tank niue eoa esce eae eo Gees ee ede ci 11 Filinig th beanscontalner uisa xoRe me o e hec 12 Filling groutid eoftee ii iol Rep N REIR RP 12 Making coffee 0 0 0 0 0 cc eee 13 TUNG OI cit Patna ale PR ee AW n doe dp Age X e eR ae ee o ater jen 13 Preswarmlirig CUpS cssuqead pe Tn vRMERET Ead Eee oda er de PERE SRE eder 14 Adjust the dispenser height iilii 14 Espresso and coffee made from coffee beans ilii iilis 15 Espresso and coffee made from ground coffee 0 0 0 0 0c eee 16 Cappuccino and milk froth 2 eee 17 Adjusting the coffee grinder 2 0 0 ee 19 Setlings odes CERRO ABE OEC DRE eee eee eec kde dd 20 Language css ees v paraa aye qe rrzeetrtarelfbaer bee PSE oe ew eue s 20 eoo P c IM PT 21 Ulm ecc T EPET 22 easi PLI T 25 Pre DreWIPQg aa essere crarriendbadedeti der dee eec edo eh Ade 25 Temperat e vocate wre Pea wh SS Gin o Se b Rn e
21. When the display shows Process finished Please confirm The brew unit is cleaned and rinsed m Select OK and then Clear to go back to the main menu 41 Cleaning and Care Froth dispenser Intake hose Clean the froth dispenser after each use otherwise they may become blocked with dried milk and hard to clean Rinsing does not replace cleaning in the dishwasher m Select Care m Pull all pieces apart Remove the piece with the gaskets by turning and m Set a glass with water under the pulling it apart intake hose and select OK m Select System rinse m Insert the pieces in the dishwasher The intake hose takes in the water and and then lubricate the gaskets with rinses it the supplied silicone grease Cleaning in the dishwasher Take care that the small holes of the single pieces are not clogged see To clean the froth dispenser in the dishwasher take the parts from the machine Regular cleaning in the dishwasher is important so that the froth dispenser does not clog over time when milk is not removed during rinsing arrow Pinch the soft parts to loosen the soiling then blow them out Do not use a needle to remove residues the parts may get damaged m Turn the cover above the spout to the left CD m Pull the froth dispenser out of the machine C holding it by the spout and the intake hose 42 Cleaning and Care m Reassemble the parts as shown m Push the froth
22. d control is set too fine Set the grind control to a coarser grind The coffee espresso is not hot enou gh Were the supply lines pre heated The temperature is set too low Check if the brew unit is clogged The smaller the cup the more important it is to pre heat Check on what temperature range the coffee type is set Clean the brew unit No drink is prepared although the beans were grinded and enough water is in the container The grind control is set to the finest or the grind amount is set to the maximum The process is timed the process might need so long there is no time for brewing any more Set the grind control or the grind amount to a different position 49 Frequently asked questions The steam heating system is turned off but steam can still dispensed Steam can be dispensed as long as the steam heating system is heated Once it has cooled steam can only be dispensed once the steam system has heated The coffee dispensing is interrupted The water tank is empty If the unit is plumbed check the water line and plumbing If the unit is used with the water tank refill the water tank with fresh cold tap water You will be asked whether you would like the coffee dispensing to continue after the water tank has been filled If you do not confirm with OK within 5 minutes the coffee preparation will be cancelled
23. e m Select Settings and then more twice m Select User profiles The upper display line shows which user profile is currently set if different profiles were already created The Standard profile has standard settings m Select Creating m Select the center left or right touch control to select a letter m Touch Select m Repeat the step until the desired name is spelled out To delete a letter m Select Backspace The last letter will be deleted To save aname m Select OK The display shows the typed name The display shows more selections Change name Delete Change Not saving a name m Select the Clear touch control Settings Change name m f you would like to change a name touch Change name and then the touch control next to the name to be changed m Type in the name as described in Creating a user profile and select OK m Select Clear to go back to the previous screen Delete To delete the user profile completely m Select Delete m Select the touch control next to the name to be deleted m Select Yes if you are sure you would like to delete the selected name The selected name will be deleted from the list Change The appliance can be set so that it changes back automatically to the standard profile or that the once set user profile is maintained m Select Change m Select from Never The unit keeps the once selected u
24. e time During the very first use you will be prompted to select a language m Select the desired language touch control and then OK The symbol indicates the Language setting If you accidentally select an unfamiliar language simply look for the I symbol Touch the control next to the flag symbol and select your language of choice m Customize the coffee system to your desired settings Prepare two cups of coffee and dispose of them this will clean any coffee residues from the brew unit left from the quality control tests at the factory Turning off m Select On Off The display shows the time of day After 60 seconds the display turns off depending on the setting See Settings Clock If the rinse automatic feature is turned on the machine will begin rinsing if a coffee was prepared that day Filling water beans or ground coffee Before using the coffee system for the first time clean the appliance See Cleaning and Care Filling the water tank The beans and the water quality is important for a good espresso or coffee If the machine is plumbed to a water line and turned on the water tank is automatically filled Empty the water tank daily The unit displays a reminder when turned on When using the coffee system with the water tank only fill the water tank with cold fresh tap water Never add hot water or any other liquids except cold water to the water tank Do not use mi
25. eiae RR rite 26 Funse automaltlo 2 22 oe bbe dee beak baed Pea RP doe peed Skin a e ea 26 Steam SySterT cpp dicet dot bed ori Lade Bate pd dade Arne dh ood 27 GONIN TCI n E TA E 27 Totalno Coltees olus sheet sheen ed hat hae elk eae RC S d o ee ups 28 scita MMT c D 28 Water hardness acce Ce cg tont c waa ead oe UR CE dece n c a 29 User protlles cs aei PVG eee DE ERE Perd Re E RR USD E a eee isa 30 Displays deed v aa TRE und Rey eS eg perd dad ePi PEE Ps 32 TONG OPUONS xx um ta ad md ERE dE Oe e coded der Peor dE RUE EAD deg 32 gibus PC 33 uc RT CTI 33 Setting the serving sizes llli i le een 34 Contents Cleaning and Care 00 0 35 Descaling the appliance 0 0 0 0 eee 45 Frequently asked questions 0 0 0000 47 After sales service uuu 54 Installation instructions naaa 55 Caring for the environment uaaa 56 PIUMBINO o ee e tanap ea aiaa gT ox x ow RA EDU e Rd a E Rees 57 Electrical connection 0 0000 58 Installation 0 0 eee 59 AGJUSIING The door NINGES iude beer eoe X dedo Ree die bete eee es 61 IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances basic safety precautions should always be followed including the following Read all instructions before installation or use of the coffee system Please read these instructions carefully to prevent accidents and machine damage
26. elect the User profile for which you would like to set the grind amount m Select Settings SETTINGS lt LANGUAGE P GRIND AMOUNT gt FRE BREWING more gt lt a CLOCK lt TIMER m Select Grind amount The grind amount can be set to individual preferences for espresso coffee and cappuccino m Select the desired beverage m Select the center left or right touch control to set the grind amount to more or less m Select OK to save the setting in the User profile m Select Clear until the display shows the desired menu Pre brewing During pre brewing a small amount of water is released onto the ground coffee After a short time the remaining water is pushed through the ground coffee at a high pressure If the function is turned off the hot water will be immediately pushed at a high pressure through the ground coffee Pre brewing is set to off by default m Select the User profile for which you would like to set the pre brewing SETTINGS P gt 4 back CARE USER PROFILES m Select Settings SETTINGS lt LANGUAGE P GRIND AMOUNT gt CLOCK PRE BREWING gt TIMER more m Select Pre brewing PRE BREWIMG Long Normal lt Mormal lt Without The second line shows the currently selected pre brewing option m Set the desired option and select OK to save the setting 25 Settings Temperature Five temperature
27. fee dispenser 4 Top lighting height adjustable Door grip Froth dispenser removable for better cleaning Intake hose removable together with dispenser Hot water spout Guide to the machine Interior view Main switch 2 Cover for ground coffee funnel 8 Funnel for ground coffee 4 Grind control lever Coffee bean container Drip tray with no spill grid for transport Water tank with water inlet valve Brew unit Waste unit First steps to use Touch controls Select a touch control with your fingertip to use the machine Display To select a menu select the touch control next to the respective menu point If more features can be selected under one menu point the menu has three dots e g Settings more back If there are more menus which are not immediately shown select more or back to see further options Clear to go back to the previous Screen Stop to cancel coffee preparation OK to save a setting Before the first use The appliance must be correctly installed and connected before the first use See Electrical connection Plumbing and Installation instructions Clean the appliance and remove protective foils before the first use See Cleaning and Care 10 Turning on m Select On Off to turn the coffee system on The display shows the clock See Settings Clock Setting the time of day to set th
28. ghten the screws m Carefully turn the lower screws to center the machine m o secure the appliance in the cabinet tighten the upper screws 2 by hand Do not use an electric screwdriver Installation Adjusting the door hinges The door hinges can be adjusted if the door cannot be opened easily m To adjust the door sideways D turn screw D m o adjust the door to the front or back turn screw 61 62 63 Please have the model and serial number of your appliance available before contacting Technical Service U S A Miele Inc National Headquarters 9 Independence Way Princeton NJ 08540 Phone 800 843 7231 609 419 9898 Fax 609 419 4298 www miele com Technical Service amp Support Nationwide Phone 800 999 1360 Fax 888 586 8056 TechnicalService mieleusa com Canada Miele Limited Headquarters and Showroom 161 Four Valley Drive Vaughan ON L4K 4V8 Phone 800 643 5381 905 660 9936 Fax 905 532 2290 www miele ca info miele ca general enquiries professional miele ca commercial enquiries MieleCare National Service Phone 800 565 6435 905 532 2272 Fax 905 532 2292 serviceQmiele ca technical enquiries Alteration rights reserved 4507 with convertible water connection CVA 4075 For the most updated manual see the Miele web site M Nr 07 194 220 01
29. ll the brew unit out The brew unit is not in the correct position if it is hard to pull out See Frequently asked questions m Clean the brew unit under running warm water Do not use soap m Press the light colored button on the 7 brew unit handle CD and turn the Leave the handle in position or the handle to the right brew unit cannot be inserted properly 40 Cleaning and Care Cleaning Degreasing the brew unit Depending on the fat content of the coffee the brew unit can clog Clean the brew unit approx every 200 cups with the enclosed detergent tablets They are specially developed for the coffee maker to optimize the degreasing The cleaning tablets can be purchased from Miele As a reminder the display shows Cleaning must be started after 200 cups and then until the machine is cleaned The cleaning process takes about 6 minutes m Select Care m Select Cleaning and then OK The display guides you through the cleaning process Please follow the single steps m Set a 1 quart container under the coffee dispenser The interior is also rinsed therefore the drip tray must be emptied When the display shows Please drop the cleaning tablet in the funnel for ground coffee m Take out the funnel cover and open the funnel lid m Insert the cleaning tablet in the funnel m Close the lid reinsert the cover and close the door m Select OK Follow the display messages
30. n again Start the desired preparation again f the message still appears contact Technical Service F 73 or Check brew unit The brew unit is clogged and cannot reset to the correct position Select Clear Take out and clean the brew unit See Cleaning and Care Brew unit Reinsert the brew unit and close the door f the message still shows contact Technical Service F 94 The plumbed water intake is faulty Check for kinks in the water intake hose and open the water supply all the way f the fault is still displayed call Technical Service The message Too much ground coffee appears in the display If too much ground coffee passes through the coffee chute the machine is unable to process it so it can be emptied into the waste container Select OK The machine is now ready for use 53 After sales service In the event of a fault which you cannot easily fix yourself please contact the Miele Technical Service Department at the contact information on the back of this booklet When contacting the Technical Service Department please quote the model and serial number of your appliance given on the data plate inside the appliance 54 MieleCare MieleCare our Extended Service Contract program gives you the assurance of knowing that your appliance investment is covered by 5 years of worry free ownership MieleCare is the only Exte
31. nded Service Contract in the industry that guarantees repairs by a Miele Authorized Service Provider using genuine Miele parts Only genuine Miele parts installed by factory trained professionals can guarantee the safety reliability and longevity of your Miele appliance Please note that unless expressly approved in writing by Miele s Service department Extended Service Contracts offered by other providers for Miele products will not be recognized by Miele Our goal is to prevent unauthorized and untrained service personnel from working on your Miele products possibly doing further damage to them you and or your home To learn more about MieleCare Extended Service Contracts please contact your appliance dealer or visit us online at http store miele com Installation instructions Caring for the environment Disposal of packing material The cardboard box and packing materials protect the appliance during shipping They have been designed to be biodegradable and recyclable Please recycle Ensure that any plastic wrappings bags etc are disposed of safely and kept out of the reach of children Danger of suffocation 56 Disposal of an old appliance Old appliances may contain materials that can be recycled Please contact your local recycling authority about the possibility of recycling these materials Ensure that the appliance presents no danger to children while being stored for disposal
32. ne and dispense a cup of coffee Then try to move the slide control again Settings The coffee system can be customized Language Ip SUING Ivica IO OKenges To show the displays in the desired language select the language before the first use Preheating DESCALING USER PROFILES STANDARD lt SETTINGS P m Select Settings from the main menu during the pre heating phase or lt back SETTINGS P gt lt CARE USER PROFILES m in the main menu SET TINGS lt LANGUAGE P GRIND AMOUNT gt lt CLOCK PRE BREWING gt TIMER more m Select Language LANGUAGE english lt english francais gt 4 deutsch more s lt espa ol OK gt m Select the desired language To see more language options select more The language options are English German Espa ol Francais Italiano Polski and Portugu s m Select OK to save the selection All displays are shown in the selected language m To go back to the main menu select Clear 20 Settings Clock 4 back a CARE USER PROFILES m Select Settings SETTINGS LAMGUAGE P GRIMD AMOUNT gt PRE BREWING gt more SETTINGS P gt lt CLOCK TIMER m Select Clock Setting the time of day m Select Enter Time m Select or with the right touch controls to select the hours m Set the minutes by selecting Minutes m Select or
33. neral water Mineral water leads to heavy calcium built up in the machine that can damage the unit m Open the appliance door by grasping the recess next to the hot water spout and pulling the door towards you m Pull the water tank out m When using the coffee system with the water tank fill the tank with fresh cold tap water to the Max mark A valve at the front of the tank prevents leaks m Close the lid and push the water tank into the unit until it clicks into place The water tank must be positioned correctly or the valve will leak If the water tank has not clicked into place pull the tank out check and clean the niche Filling water beans or ground coffee Filling the beans container Only fill espresso or coffee beans in the beans container Anything else including ground coffee will damage the grinding unit Caramelized or otherwise pre treated beans or sugar containing beverages must not be filled into the appliance It will damage the coffee system m Pull the bean container out sm c LLAA m Push the lid back and fill the container with roasted coffee beans m Push the lid back into place and put the beans container back into the appliance m Close the door 12 Filling ground coffee A funnel for ground coffee is provided in case you would like to prepare a different coffee type e g decaffeinated coffee m Pull the cover for the ground coffee fu
34. ng chlorides sand soda or scouring agents These will damage the surface To avoid mold of coffee waste clean the unit regularly All parts can be cleaned in the dishwasher except the brew unit and the bean container When the parts are cleaned in the dishwasher they might get discolored by food residues such as tomatoes See the Maintenance log at the end of this manual Rinse If you do not wish to rinse the lines automatically they have to be flushed manually Rinse them twice daily once before using the machine and before turning it off for the day 4 back 4 CARE USER PROFILES m In the main menu touch more until Care shows Select Care SETTINGS P gt m Select System rinse m Select OK Hot water will flow through and clean the brew unit hot water and coffee dispensers m When finished select OK then Clear to go back to the main menu 35 Cleaning and Care Water tank If the unit is not plumbed empty the water tank daily and refill before preparing the first drink with fresh cold tap water Check if the valve is clean If the valve has residues on it the water tank will not connect properly and might leak m Clean the niche of the water tank m Remove the water inlet connection from the lid of the water tank clean thoroughly 36 Waste unit The display shows a message to empty the waste unit Clean the waste unit daily Coffee waste
35. ng size approx 30 250 ml Hot water serving size approx 30 250 ml m Set the desired cup size under the coffee dispenser m Select the drink you would like to program Press and hold the touch control until Serving setting is displayed under the drink type m Release the touch control m Select OK once the cup is filled to your desire Cappuccino is a combination of milk froth and espresso When preparing milk froth the froth time can be individually set The amount of espresso can be set to approx 30 125 ml m Set the desired cup size under the froth dispenser first m To set the amount of froth press and hold Cappuccino until the display shows Serving setting m Select OK once steam and froth are dispensed to your desire The froth time has been set m You will then be prompted to move the coffee cup from under the froth dispenser to the coffee dispenser m Press and hold OK until the display shows Serving setting m Release the touch control m Select OK once the cup is filled to your desire The programmed amount will be dispensed every time the drink is made The water flow stops automatically when it reaches the maximum amount possible The maximum filling quantity will then be saved for the drink 34 Cleaning and Care Allow the coffee system to cool before cleaning Danger of burns Do not clean the unit with a steam cleaner Never use cleaners containi
36. nnel out of the appliance and lift the funnel lid CD m Place one spoonful of ground coffee into the funnel using the supplied spoon and close the lid m Push the cover into the appliance and close the door See Making Coffee Espresso and coffee made from ground coffee Making coffee Turning on The lines must be rinsed daily before the first use This will happen m Select the On Off touch control automatically if Rinse automatic is set to On see Settings Rinse Automatic and the machine is cold Please empty the water tank After heating hot water runs out of the two spouts into the drip tray If m Empty the water tank when turning Rinse automatic was set to Off the machine on to ensure that only use Care to rinse the lines See fresh tap water is used to prepare Cleaning and Care Rinse coffee Then the upper line in the display shows Preheating lt DESCALING USER PROFILE STANDARDO lt SETTINGS P If Rinse automatic is set to On default the machine rinses after the heating phase and the main menu is displayed Making coffee Pre warming cups All beverages should be made in a warm cup to develop the aroma The smaller the amount of coffee or espresso and the thicker the cups the more important it is to pre warm the CUps m Set the cup under the hot water spout HOT WATER gt MILE FROTH mare ESPRESSO COFFEE
37. one is highlighted Settings Plumbed This unit is designed for operation with a permanent tap water connection but can be converted from water line to water tank use To do that the plumbed water line connection can be turned on or off When the unit is set to on it uses the water line The water tank is automatically filled When the unit is set to off the water tank is used and must be filled manually with fresh tap water m Select Settings then More three times SETTINGS PLUMBED gt RESET gt 4 back lt DISPLAY lt TONE OPTIONS m Select Plumbed m Select On or Off The second line shows the current setting m Confirm with OK Reset To select the factory defaults select in the submenu to Reset all all settings back to default timer rinse automatic steam system lighting System Lock water hardness display last selected coffee type and all standard profile settings or the User profiles If you select one of these options m Select Yes to reset to the default settings or No to keep the selected settings 33 Setting the serving sizes The flavor of the coffee depends on the coffee and quantity of water used To ensure the machine uses exactly the amount of water to suit your taste and your cups there is a choice of two serving sizes for espresso coffee The fill height can be programmed Espresso serving size approx 30 125 ml Coffee servi
38. or Dimming On during use On The lighting turns on and off when the unit is turned on and off Off The lighting stays turned off Dimming The brightness of the upper and lower lighting can be set independently of each other m Select Top or Bottom m Set the brightness by selecting the center touch control to the left or right m Select OK to save the selection m Select Clear to get back to Settings 27 Settings Total no coffees m Select Total no coffees to check the number of previously dispensed espresso coffee and cappuccino After a few seconds the display switches back to the Settings menu or touch OK 28 System Lock The coffee system can be locked so that it cannot be used by children or those not familiar with the operating instructions To activate the System Lock it must be set in the settings m Select Settings and then select more twice m Select System Lock The second line shows if the System Lock is currently activated or not m Select On and confirm with OK If Off is selected the unit cannot be locked safety measure m Turn the appliance off with the On Off touch control m Select the touch control next to ml SYSTEM LOCK Off m Select On and then OK The appliance is now locked and will not operate The display shows a locked padlock x Unlocking the coffee system m Select the E symbol m Select Off
39. preparing milk froth and cappuccino Clean the froth dispenser and intake hose immediately after use If the milk is allowed to dry the parts may get clogged and difficult to clean See Cleaning and Care Adjusting the coffee grinder The amount of ground coffee determines the strength of the coffee and the quality of the crema The amount of ground coffee can be adjusted in the main menu See Settings Grind amount To prevent machine damage adjust the coffee grinder one notch at a time and let the beans grind before adjusting another notch Otherwise the machine will be damaged The grinder should be adjusted f the espresso flows too quickly into the cup the pressure cannot be built up because the beans have been ground too coarsely The grinder should be adjusted to a finer setting If the espresso only trickles into the cup the beans have been ground too fine and the coffee will be bitter The grinder should be adjusted to a coarser setting If the crema is evenly colored but pale the ground coffee is too coarse If the crema is very dark brown on one side graduating almost to white on the other the ground coffee is too fine To adjust the grinder setting m Push the slide control to the left for a finer grind or to the right for a coarser grind You should be able to feel the notches when moving the slide control If the slide control will not move m Close the machi
40. rom damage to the gasket See Installation Adjusting the door hinges The grind control lever will not move Close the unit and prepare a coffee espresso The grind grade can now be reset The brew unit cannot be taken out The brew unit is not in the correct Close the door and turn the appliance on position The brew unit will position itself into the correct position The cover of the ground coffee funnel cannot be pushed in properly Close the lid of the ground coffee funnel 48 Frequently asked questions Preparing dispensing problems No water steam or milk is dispensed from the froth dispenser The water tank is not correctly inserted The dispenser is clogged Take out the water tank and reinsert it Clean the froth dispenser as described in Cleaning and Care Froth dispenser Intake hose The grinding sounds louder than us ual There could be pebbles within the coffee beans Turn off the unit immediately Contact the Miele s Tech Service The grinding is quieter than usual The coffee bean container is empty The respective message appears in the display Wait until no sound is heard and refill the coffee bean container The coffee espresso flows too fast into the cup The grind control is set too coarse Set the grind control to a finer grind The coffee espresso flows too slow into the cup The grin
41. s are available for each beverage three for hot water Maximum is the highest temperature minimum the lowest Not every coffee type allows high temperatures Some types react so sensitively that the crema cannot be properly built m Select the User profile for which you would like to set the temperature m Select Settings and then more SETTINGS STEAM SYSTEM LIGHTING gt more 4 back TEMPERATURE lt RINSE AUTOMATIC m Select Temperature The temperature can be set individually for espresso coffee cappuccino and hot water m Select the desired beverage m Fach beverage shows the currently selected temperature m Select the respective touch control until the desired temperature is highlighted m Select OK 26 Rinse automatic It is important to flush out any residual coffee from the lines when starting to use the machine for the day If Rinse Automatic is set to on the rinsing starts automatically once the machine is turned on and still cold The lines are rinsed with hot water and in return pre warmed A message shows in the display The machine will also run an automatic rinse before it switches off if it has been used to prepare a drink The rinse automatic is set to on by default To turn rinse automatic off on m Select Settings and then more SETTINGS STEAM SYSTEM LIGHTING gt more gt 4 back TEMPERATURE lt RINSE AUTOMATIC m
42. s is residual water from the cleaning process Coffee water is in the waste unit If the grind control is set to very fine If the grind control is not set to very fine there might be coffee water in the contact Technical Service waste unit The descaling process was started accidently The descaling process cannot be canceled once it is started The process needs now to be completed This is a safety feature to ensure the process will be completed It is important for best results and the longevity of the machine The preheating time is increased the water flow amount is not correct and the unit performs less The machine needs to be descaled See Descaling the appliance No water flows from the spouts The filters in the brew unit are Rub any residue off the filters with a clogged sponge 51 Frequently asked questions The brew unit or waste unit could not be pulled from the machine The brew unit is not in the basic position The door was opened during grinding or brewing Close the door The brew unit automatically gets into the basic position No crema has formed or it is different Checkif the grind control is set too coarse or too fine Check what temperature range the coffee type is set If the temperature is too high there are black areas in the crema The coffee is not fresh enough The coffee is unsuitable for u
43. s or has been damaged in any manner Contact Miele P Always attach the cord to the appliance first then plug it into the wall outlet To disconnect turn the machine off then remove the plug from the wall outlet P The unit is designed for a cold water connection Do not connect it to hot water it will get damaged P The water supply must be accessible after installation P Do not damage or kink the cover of the water intake hose P The waterproof system will only work if itis installed correctly itis damaged the machine repaired or faulty parts replaced the water supply is shut off when not using the coffee system for an extended period of time e g vacationing IMPORTANT SAFETY INSTRUCTIONS Use The coffee system must be maintained daily to prevent the growth of harmful bacteria and mold Please read the Cleaning and care section of this booklet All parts are dishwasher safe except the brew unit and bean container Caution Do not look directly or with an optical instrument into the lighting laser radiation Caution Risk of burns when dispensing hot beverages they are extremely hot P Persons which lack physical sensory or mental abilities or experience with the machine should not use it without supervision or instruction by a responsible person P Close supervision is necessary when any appliance is used by or near children P Do not touch hot surfaces
44. se in this machine See Filling the beans container The coffee dispensers are set too high Too much crema has formed and is above the coffee dispensers Some coffee types produce too much crema when the coffee espresso temperature is set to the maximum and the amount of ground coffee is too much Lower the temperature and amount of ground coffee The milk froth does not flow but spits Before using for the first time the water lines need to be filled See Making coffee Cappuccino and milk froth When preparing milk froth for the first time the milk is spit from the mug The door was opened during the heating phase High steam pressure has built making the steam dispensed too strong when the valve is opened Keep the door closed during the heating phase When preparing milk froth the preparation starts stops then starts again This is not a fault The start and stop action aids the machine in preparing the best froth possible You hear water gurgle or rushing The water tank has automatically filled 52 Frequently asked questions F messages F 10 or F 17 No water is dispensed The water tank is not inserted properly Take it out and reinsert correctly The water tank was not filled correctly during the descaling process Fill the water tank up to the correct mark After fixing the fault the machine turns off then o
45. ser profile until another user profile is selected At turning on Every time the coffee maker is turned on it selects automatically the standard user profile regardless which user profile was last selected After servings After each dispensing of a drink the unit switches automatically back to the standard profile Selecting a user profile m Select User profile Standard and then the desired profile m Select OK The Standard profile has standard settings 31 Settings Display The display contrast and brightness can be adjusted m Select Settings and then select more three times SETTINGS 4 back lt DISPLAY TOME OPTIONS m Select Display m Select Brightness or Contrast and then the setting The higher the number the higher the contrast or brightness m Select OK to save the selection 32 PLUMBED gt RESET gt Tone options A tone can be selected to confirm the selection of a touch control m Select Settings and then more three times SETTINGS PLUMBED gt RESET 4 back DISPLAY TOME OPTIONS m Select Tone options To turn the tone on or off m Select Keypad tone until the desired option is highlighted If the keypad tones are turned on the volume can be adjusted The higher the number the louder the tone m Confirm the selection with OK Volume m Select Volume until the desired volume of the keypad t
46. t water and liquid dish soap then dry with a soft cloth m Push the lid back and reinsert the bean container into the machine Cleaning and Care Coffee dispenser connector Interior and door m Once all movable parts are removed clean the interior with a solution of hot water and liquid dish soap Dry ground coffee can be vacuumed A connector between the brew unit and coffee dispenser is located on the inner door m Gently clean the connector regularly with a damp cloth without removing Thel tofthei door has a the lubricant for the gasket pie apod aec o MES drip tray Clean the drip tray m Lubricate the gasket once a month with the supplied silicone grease 39 Cleaning and Care Brew unit Manually clean the brew unit monthly The movable parts are lubricated and the gaskets will get damaged in the dishwasher m Take out the water tank waste unit and the cover for the ground coffee funnel m Rub off any coffee residue from the filters with a sponge One filter is in the funnel D the second is to the left of the funnel m Dry the funnel D to prevent ground coffee from sticking m Clean the interior and remove coffee residues Dry coffee grounds can be vacuumed m Press the light colored button on the m Push the brew unit in the track brew unit handle and turn the straight into the appliance handle to the left m Press the brew unit catch downwards and pu
47. tightly onto the water connector of the coffee machine Tighten the compression fitting by hand do not use a tool The fitting includes an opening for standard 1 4 piping E m Connect the compression fitting to the water supply m Check for leaks 57 Electrical connection Important Ensure that power is not supplied to the machine while installation or maintenance work is performed The coffee system comes equipped with a 6 ft 1 8 m power cord with a NEMA 5 15P molded plug for connection to a 120 V 15 A 60 Hz All electrical work should be power supply performed by a qualified electrician in strict accordance with national and local safety regulations Installation repairs and other work by unqualified persons could be dangerous The manufacturer cannot be held responsible for unauthorized work Verify that the voltage load and circuit rating information found on the data plate match the household electrical supply before installing the coffee System If there is any question concerning the electrical connection of this appliance to your power supply please consult a licensed electrician or contact Miele s Technical Service Department See back page for contact information WARNING THIS APPLIANCE MUST BE GROUNDED 58 Installation Installation options The coffee system is designed to be built into cabinetry o A O M to co _ So TS N TL
48. to electricity Extension cords do not guarantee the required safety of the appliance danger of overheating P Before service or maintenance disconnect the power supply by either removing the fuse tripping the circuit breaker or unplugging the unit P Install or locate this appliance only in accordance with the provided installation instructions IMPORTANT SAFETY INSTRUCTIONS P Installation work and repairs must only be performed by a trained technician in accordance with national and local safety regulations Repairs and other work by unauthorized persons could be dangerous and may void the warranty P Only use Miele original spare parts Only then can the manufacturer guarantee the safety of this machine P Never open the outer casing of the appliance Tampering with electrical connections or components and mechanical parts is dangerous and may cause machine damage P If the machine is installed in combination with other appliances a protective base should be installed between the appliance and the unit P Do not install or use outdoors even if installed in the display cabinet P To protect against fire electric shock and injury to persons do not submerge the cord or plugs in water or other liquids P Do not let the cord hang over the edge of a table or counter or touch hot surfaces P Do not operate any appliance with a damaged cord or plug or after the appliance malfunction
49. ut any descaling residues thoroughly with water Fill with fresh water to the amp mark During rinsing water runs from the dispensers When the display shows Please empty the drip tray Empty the drip tray Since the machine is also rinsed inside the drip tray needs to be emptied to continue rinsing When the display shows Process finished Descaling is complete Follow the prompts in the display The appliance is rinsed a final time Frequently asked questions Repairs to electrical appliances should only be carried out by a suitably qualified person in accordance with local and national safety regulations Repairs and other work by unqualified persons could be dangerous The manufacturer cannot be held responsible for unauthorized work Machine Problems The light does not illuminate when the appliance is turned on Is the unit locked Is the lighting turned off See Settings Lighting If not the light bulb has burnt out Contact Miele s Technical Service Department The heating phase takes a long time When the door is opened during the heating up phase e g to fill the water tank the heating element turns off The unit heats only with the door closed Keep the door closed during the heating phase The light turns off suddenly The light turns off automatically when the machine has not been used for 10 minutes The display messages are difficult to read
Download Pdf Manuals
Related Search