Metra Electronics 99-7579 User's Manual
Contents
1. included with the equalizer mount the unit to the kit see Fig A IF AN EQUALIZER WILL NOT BE INCLUDED Snap the Equalizer Dummy Plate into the Radio Housing see Fig B A Strip wire ends back 72 B Twist ends together C Solder D Tape Locate the factory wiring harness in the dash Metra recommends using the proper mating adaptor and making connections as shown Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit Re connect the battery terminal and test the unit for proper operation Mount the head unit kit assembly to the sub dash with 4 screws previously removed in step 12. Rev 130103 KIT FEATURES Mela Pa Metra Division of METHACOHP em Shaft and DIN unit provisions 99 7579 iii INSTALLATION W Various NSTR UCTI ONS mounting depth alternatives ime axe APPLICATIONS eae eee NISSAN x NM Pathfinder 1996 00 2 Faceplate N Dummy Plate Snap Spacers f t g 0x1 Phillips Pan head Screws TOOLS REQUIRED e Phillips screwdriver SE 1 800 221 0932 LJ www metraonline com Adjustable wrench COPYRIGHT 2001 METRA ELECTRONICS CORPORATION Disconnect the negative battery terminal to prevent an accidental short circuit Remove 2 screws from the base of the radio trim bezel Unclip the bottom edge of the radio trim bezel and disconnect the hazard light defroster wiper and cligarette lighter wiring Remove the radio trim bezel Remove 4 screws securing the factory head unit and disconnect the wiring OPTIONAL 2 SHAFT HEAD UNITS Attach the Faceplate to the Radio Housing Slide the aftermarket head unitinto the kit and secure with shaft nuts see Fig A DIN HEAD UNITS Attach the Snap Spacers tothe inner walls of the Radio Housing Slide the DIN cage into the kit and secure by bending the metal locking tabs down Slide the aftermarket head unit into the cage until secure see Fig B IF AN EQUALIZER WILL BE INCLUDED Slide the aftermarket equalizer into the back of the Radio Housing Using the hardware
Download Pdf Manuals
Related Search