Magnadyne M4100CD User's Manual
Contents
1. the PGM mode e When the CD is playing in programmed order pressing the 2mm button will clear all the pro grammed content and CLR will appear in the display If you don t press the 2mm button to carry out program setting press the button for sev eral seconds NO P will appear in the display Track Time Display To display the running time remaining time of track press the AS PS button 12 M4100CDUM qxd 07 24 03 4 29 PM Page E Installation Procedure Step 1 The radio chassis is designed to be Sleeve Mounted through a opening in the dashboard panel The required opening size is 182mm 7 3 16 x 84mm 3 5 16 Cut or enlarged an opening in the dashboard to accommodate the mounting sleeve Step 2 If you are replacing an existing factory installed radio an adapter harness might be avail able for your vehicle to eliminate the need for cut ting your factory wiring Contact Radio Shack or other car stereo installation centers for the availabil ity of a harness for your vehicle Step 3 Insert the mounting sleeve into the hole in the dashboard Bend the metal tabs on the sleeve to secure the mounting sleeve to the dashboard Step 4 Bring all wiring for the connection of the unit including the antenna through the center of the mounting sleeve Connect the wiring as follows Yellow Wire w Fuse Connect this wire to a con stant 12 volt power source a power source that is not contr2. M4100CDUM qxd 07 24 03 4 29 PM Page E Installation and Operations Manual M4100CD Water Resistant AM FM WB and CD Stereo Receiver SERIES A Registered Trademark of Magnadyne Corporation 4 M4100CDUM qxd 07 24 03 4 29 PM reas tb Location and Function of Control at a Glance AM FM CD RECEIVER J 1 Power Button Turns the unit On Off 2 Audio Control Buttons Adjusts the Volume Bass Treble Balance and Fader 3 Multi Function Buttons Adjusts the radio frequency sets the clock and changes CD tracks gt Mode Button Changes sequentially through the following sources Radio Tuner gt CD gt CD Changer gt Auxiliary gt Radio Tuner oa Radio Station Scan Shift Button Radio Scans through the strong stations in the current radio band CD Press this button to access secondary function keys in CD mode 6 Multi Function Button 1 Radio Recalls a memorized radio station and programs a radio station into memory See Radio Operation for more information N Multi Function Button 2 M EM Radio Recalls a memorized radio station and programs a radio station into memory See Radio Operation for more information CD Programs a CD track into memory S
3. acket is in the down posi panel will slide down to a flat position tion insert the front panel Open Button 2 With the front panel down press the bottom button of the front panel upward and pull the front panel out from the panel bracket 2 After the front panel is securely inserted on the panel bracket push he front panel into posi tion the unit is now ready for operation Bottom Button 3 For safekeeping store the front panel in the supplied protective case immediately after being removed M4100CDUM qxd 07 24 03 4 29 PM Page Ep Radio Operation Listening to the Radio 1 Press the BAND button 17 to select a radio band FM1 FM2 AM or WX weather band 2 AM or FM Station Selection Automatic Seek Station Selection Press the Kor gt button 3 to automatically seek the next strong station Scan Station Selection Press the scan button 5 to automatically scan through strong sta tions in the current radio band The radio will pause for 5 seconds at each strong station Each time the frequency flashes on the display Press the scan button again to hold the current station Manual Station Selection Press the amp or gt button for more than 3 seconds to select man ual station selection and MAN will appear in the display Use either button to manually seek up and down the frequency scale Note If either button is
4. ast Forward and Fast Reverse Press and hold the amp or buttons to fast for ward or fast reverse Disc play starts from when you release the button Pause Disc Play Press the mre button 14 to pause the CD play er Press it again to resume play Repeat the Same Track Press the button 9 to continuously repeat the same track Press it again to stop repeat Play All Tracks in Random Order Press the button 10 to play all tracks on the current disc in random order Press it again to stop random play Intro Scan Press the button 11 to play the first 10 seconds of each track Press it again to cancel the function and listen to the track Program CD Tracks Use the Program function to select up to 32 CD tracks to play in any order The Program function allows you to select a track number for each spot in the playing sequence A CD must be inserted to use the Program function 1 Press the 2mm button 7 to enter Program mode PGM starts flashing and the P 01 appears in the display 2 Press the or button to choose a track num ber Then press the um button to memorize it Select the next track and it will be memorized as P 02 Repeat these steps to program tracks in the desired order Then press the button to play the CD in programmed order When you have programmed 32 tracks FULL will appear on the display e When the CD is playing in program order press the button to exit
5. automatically Notes on CD Rs and CD RWs e Be sure to only use discs with the following labels in this unit e The unit cannot play a CD R and CD RW that is not finalized Please refer to the manual of your CD R CD RW recorder or CD R CD RW software for more information on the finalizing process e This unit will not play MP3 music or WMA music recorded on any CD R or CD RW disc e Depending on the recording status conditions of the disc and the equipment used for the record ing some CD Rs CD RWs may not be compati ble with this unit To have more reliable play back please follow these recommendations Use CD RWs with speed 1x to 4x and write at speed 1x to 2x Use CD Rs with speed 1x to 8x and write at speed 1x to 2x Do not play a CD RW which has been written on more than 5 times COMPACT COMPACT COMPACT oise oist ois DIGITAL AUDIO DIGITAL AUDIO DIGITAL AUDIO idea chk ReWritable a M4100CDUM qxd 07 24 03 4 29 PM rae tp CD Operation Inserting a Disc Push the Open button 13 to open the front panel Insert a disc into the CD Slot label side up and the disc will begin to play automatically Ejecting a Disc Push the Open button to open the front panel Press the EJECT button 15 to stop CD play and the disc will be ejected Select Tracks Press the or gt buttons to move to the previ ous track or the following track The track num ber appears in the Display Area F
6. cost are the sole responsibility of the purchaser This warranty does not cover the cabinet appearance items or accessories used in connection with this product or any damage to recording or recording tape or any damage to the products result ing from improper installation alteration accident misuse abuse or acts of nature MAGNADYNE CORPORATION OR ITS AUTHORIZED AGENTS SHALL NOT BE LIABLE TO ANYONE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES OR CLAIMS EXCEPT THOSE ACCORDED BY LAW NO EXPRESSED WARRANTY OR IMPLIED WARRANTY IS GIVEN EXCEPT THOSE SET FORTH HEREIN NO IMPLIED WARRANTY SHALL EXTEND BEYOND ONE YEAR FROM THE DATE OF SALE This warranty extends only to the original purchaser of the product and is not transferable Some states do not allow limitations on how long an implied warranty lasts and some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitations or exclusion may not apply to you This warranty gives you specific legal rights and you may have other rights that vary from state to state Defective merchandise should be returned to the original point of purchase or secondly to Magnadyne Corporation 1111 W Victoria Street Compton CA 90220 www magnadyne com Return Authorization must be obtained before sending or merchandise may be refused Copyright 2003 Magnadyne Corporation M4100CDUM Rev A 6 10 03 4
7. d Mute Button Radio Aux In Mutes audio level CD Pauses the CD player Eject Button Ejects the disc from the CD Slot when the front panel is open Display Button Displays either the clock radio station or track number See setting the clock for more information Band Button Selects the radio band in the following order FM1 FM2 AM WX Loud Button Enhances sound quality by boosting the bass and treble tones DIM Button Adjusts the brightness of the LCD display backlight Display Area Displays Radio CD and Clock functions Audio Mode Selection Button Selects the desired audio mode in the following order Volume Bass Treble Balance and Fader Audio Beep Press and hold the SEL button 20 for more then 2 seconds to turn beep on off CD Slot To access the CD Slot located behind the front panel press the Open button Reset Button The Reset Button is located behind the CD Door below the CD Slot It must be pressed with either a ballpoint pen tip or paper clip for any of the following reasons e Initial installation of the unit when all wiring is completed All the function buttons do not operate e Error symbol on the display If there is a disc in the slot when the reset button is pressed the disc will be ejected M4100CDUM qxd 07 24 03 4 29 PM Page E Using the Detachable Front Panel To Detach the Front Panel To Install the Front Panel 1 Press the OPEN button 13 and the front 1 While the panel br
8. e and Gray wire sets to con nect the speakers WARNING Any wires left unconnected must be taped off or capped off to prevent shorting DO NOT connect speaker ground wires together DO NOT connect speaker ground wires to the chassis of the vehicle DO NOT connect front and rear speaker wires together FAILURE TO FOLLOW ANY OF THESE WARN INGS WILL RESULT IN DAMAGE TO THIS UNIT AND VOIDS THE WARRANTY Remove Transportation Screws Before installing the unit please remove the two screws shown in the illus tration below Remove Transportation Screws Before Installation Note If this unit is to be installed in a boat or near a spa you should use the two pieces of plastic film 30 mm X 20 mm supplied to seal the two holes after removing the screws a M4100CDUM qxd 07 24 03 4 29 PM Page th Wiring Diagram M4100CD Antenna Socket Red Right Channel Ignition __ Red Wire Audio Line Out D Switch 12v in o L Connect to Line Input t D of Optional Amplifier Battery Yellow Wire ee 12v in ynin Channel Ground B Black Wire Power Antenna Switched Blue Wire 12v out Left pi White Wire Gray Wire id Right Front Front Speaker Z White Wire with Black Stripe Gray Wire with Black Stripe J Speaker Left pi Green Wire Violet Wire i Right Rear Rear Speake
9. ee CD Operation for more information 8 Multi Function Button 3 PGM Radio Recalls a memorized radio station and programs a radio station into memory See Radio Operation for more information CD Enters CD track program mode See CD Operation for more information 4 M4100CDUM qxd 07 24 03 4 29 PM rae ep Location and Function of Control at a Glance 9 Multi Function Button 4 RPT 10 11 12 13 14 15 16 17 18 19 20 21 22 Radio Recalls a memorized radio station and programs a radio station into memory See Radio Operation for more information CD Enters CD track repeat mode See CD Operation for more information Multi Function Button 5 RDM Radio Recalls a memorized radio station and programs a radio station into memory See Radio Operation for more information CD Plays all tracks on the current disc in random order See CD Operation for more information Multi Function Button 6 INT Radio Recalls a memorized radio station and programs a radio station into memory See Radio Operation for more information CD Plays the first 10 seconds of each track on the current disc See CD Operation for more information AS PS Elapse Button Radio Automatic memory storing and preset scan See Radio Operation for more information CD Displays elapsed time of current CD track Open Button Access the CD slot or allows the removal of the detachable face Play Pause an
10. hen the display priority is set to TIME the clock will be displayed indicating the current time Pressing DISP button will temporarily display CD track number time remaining or elapsed time depending on current CD display option selected After 5 seconds the display will return to the time Frequency Display Priority Press and hold DISP button while pressing the gt button to select Frequency Priority Pressing DISP button while in Frequency Priority will temporarily display clock In CD Mode When the display priority is set to Frequency display indicates CD track number on current CD display option selected Pressing the DISP button will temporarily display the time After 5 seconds the display will return to the CD display Illumination Dimmer Press LOUD DIM button 18 for more than 2 sec onds to change the brightness of the LCD display backlight Selecting a Mode Press MODE button 4 to choose between Radio mode CD mode CDC mode or AUX IN mode CD Changer Operation Optional Select a Disc 1 Load your CD Changer with compact discs per the manufacturer s operating instructions 2 Press the sem SHIFT button 5 to enter Shift Mode SHIFT will then appear in the display indicating the CD Changer is active 3 To change the current CD press the or gt button 3 to scroll through the CDs loaded in the CD Changer If there isn t any operation for several sec onds the unit will exit Shift Mode
11. not pressed for several seconds the unit will return to Automatic Seek Station Selection and AUTO will appear on the display Weather Band Station Selection WX Manual Station Selection Press the 4 or gt button to manually seek stations Programming the Radio You can program up to 12 FM radio stations and 6 AM radio stations Manual Station Recall Programming 1 Press the BAND button 17 to select a radio band FM1 FM2 or AM 2 Select the desired station 3 Press and hold one of the six station recall but tons 6 11 the button number and CH appears in the display area Release the button 4 Repeat the procedure to memorize more stations as desired Automatic Station Store 1 Press the BAND button to select a radio band FM1 FM2 or AM 2 Press the button 12 for more than 2 sec onds the radio will then search the current fre quency and check the signal strength until the 6 strongest stations are stored into the correspond ing preset number button When completed it will change to scan preset stations automatically Preset Scan Press the srs button to scan the preset stations The radio will hold at that preset number for sev eral seconds then will scan again To stop scan ning when a desired station is reached press the button again Sound Controls Adjusting the Volume Bass Treble Balance and Fader 1 Press the C button to select the desired audio mode The audio mode
12. olled by the ignition key Red Wire Connect this wire to a switched 12 volt power source a power source turned on and off by the ignition key Blue Wire Connect this wire to the power antenna activation circuit If no power antenna exists tape off the end of this wire to prevent short ing out the unit Black Wire Connect this wire to the frame of the vehicle ground This wire is the chassis grounding wire for the unit White Wire Connect this wire to the Left Front Speaker positive terminal or wire White Wire with Black Stripe Connect this wire to the Left Front Speaker negative terminal or wire Green Wire with Black Stripe Connect this wire to the Left Rear Speaker negative terminal or wire Green Wire Connect this wire to the Left Rear Speaker positive terminal or wire Gray Wire Connect this wire to the Right Front Speaker positive terminal or wire Gray Wire with Black Stripe Connect this wire to the Right Front Speaker negative terminal or wire Purple Wire with Black Stripe Connect this wire to the Right Rear Speaker negative terminal or wire Purple Wire Connect this wire to the Right Rear Speaker positive terminal or wire Gray Cable with Red White RCA Connectors Provides L R Channel audio signal output to an additional amplifier Note This unit is designed to connect to 4 four speakers If the installation only requires 2 two speakers use the Whit
13. r _ Green Wire with Black Stripe Violet Wire with Black Stripe Speaker M4100CDUM qxd 07 24 03 4 29 PM Page Final Installation 4 Sheet Metal Screw ocho Nut eer Metal Strap Push Out Mounting Sleeve Tabs Dashboard Mounting Sleeve Release Lever Removing the Unit from Dashboard Remove the metal strap holding the back of the radio chassis With the front panel in the down position insert removal keys into the small slots in the upper part of chassis panel There is a right and left removal key R and L are stamped on the keys Once the keys are inserted push the keys toward each other Pull gently and the radio will slide out M4100CDUM qxd 07 24 03 4 29 PM Page as CD Changer Connection M4100CD CD Changer Optional Male to Male 8 Pin Din Cable Supplied with CD changer 8 Pin Din Connector Wired Remote Connection Wired Remote Optional Lf lt gt M4100CD LIO lt gt Female 8 Pin Male 8 Pin Mini Din Connector Mini Din Connector M4100CDUM qxd 07 24 03 4 29 PM Page 6 Specifications GENERAL CD PLAYER AM RADIO Power Supply Signal to Noise Ratio Frequency Coverage Requirements gt 55 dB 530 to 1710 kHz DC 12 Volts Negative Channel Separation IF Ground gt 50 dB 450 kHz Chassis Dimensions Frequency Response Sensitivity S N 20dB 178 mm W
14. s will be display in the dis play area in the following order Volume Bass Treble Balance and Fader 2 Press the vo or 2 buttons to adjust the sound of the audio mode selected Volume Bass Treble Balance or Fader Initial Volume Level To program the Initial Volume Level adjust the volume to the desired level then press the power button for more than 3 seconds The next time the unit is turned on the volume will be at this initial level Adjusting the Audio Beep Press the button for more then 2 seconds to turn beep On Off When the beep is on the Ke icon will be displayed Adjusting the Loud Feature Press the LOUD button 18 to increase the bass output LOUD will then show in the display area Press the button again to release this function Mute Pil In Radio Aux In mode press the mute button 14 mute audio level Press the button again to release this function 4 M4100CDUM qxd 07 24 03 4 29 PM Page General Operations Setting the Clock 1 Press DISP button 16 for more than 3 seconds until the clock shown in the display area is flash ing 2 Press the button 3 to adjust the hours 3 Press the gt button 3 to adjust the minutes DISPLAY PRIORITY Time Display Priority Press and hold DISP button 16 while pressing the 4 button to select Time Priority Pressing the DISP button while in Time Priority will temporari ly display selected station frequency In CD Mode W
15. x 165 D x 50 40Hz 18 kHz 32 dBu H Tone Controls FM RADIO Bass 100 Hz 10 dB Frequency Coverage Treble 10 kHz 10 dB 87 5 to 107 9 MHz Maximum Output Power Sensitivity S N 30dB 4 x 40 watts 3V Current Drain 15 Ampere Max Stereo Separation gt 30dB ONE 1 YEAR LIMITED WARRANTY Magnadyne Corporation or its authorized agents will within one year from the date of sale to you repair replace or refund the retail sales price of said product or any part thereof at the option of the Magnadyne Corporation or its authorized agents if said product or part is found defective in materials or workmanship when properly connected and operating on the correct power require ments designated for the specific product This warranty and Magnadyne Corporation or its autho rized agents obligations hereunder do not apply where the product was damaged while in the pos session of the consumer subjected to unreasonable or unintended use not reasonably main tained utilized in commercial or industrial operations or serviced by anyone other than Magnadyne Corporation or its authorized agents or where the warning seal on the product is bro ken or the power and or plugs are detached from the unit Magnadyne Corporation or any of its authorized agents will not assume any labor costs for the removal and reinstallation of any prod uct found to be defective or the cost of transportation to Magnadyne Corporation or its authorized agents Such
Download Pdf Manuals
Related Search