Lindy 70543 User's Manual
Contents
1. Power Supply Step 2 Set J3 M for IDE Master mode S for IDE Slave mode Step Attaches 22 pin SATA connector P1 to the back of SATA Device Step 4 Connect IDE cable to J2 40 pin connector and IDE Host Important J3 must be set on Master Mode for Booting device This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operations2. IND COMPUTER CONNECTION TECHNOLOGY IDE to Serial ATA Devices User Manual English ra 021 R24 2282969019 z lt LINDY 70543 www LINDY com FE LINDY ELECTRONICS LIMITED amp LINDY ELEKTRONIK GMBH FIRST EDITION November 2004 1 Introduction This Bridge Board is a converter solution for the Serial ATA Device It has a standard 22 pin SATA port which can interface to a Serial ATA device hard disk CDROM DVD CD RW etc It accepts Parallel ATA IDE commands through the 40 pin IDE connector from the host decodes the commands and converts them to Serial ATA commands to the device Response from the device through the SATA bus are deciphered processed and converted to parallel ATA protocol and sent to the host The Converter Board supports the Serial ATA Generation 1 transfer rate of 1 5 Gb s 150 MB s on the serial ATA side and is compatible with Ultra ATA 133 on the parallel ATA side 1 1 Features 1 1 1 Overall Features Compatible with Ultra ATA 133 specifications Supports all types of SATA storage devices DVD DVD RAM MO CD ROM CD RW Hard Disk 1 1 2 Serial ATA Features Compliant with Serial ATA 1 0 specifications Supports Serial ATA Generation 1 transfer rate of 1 5Gb s Supports Spread Spectrum in receiver 2 Installation Step 1 Connect Y type power cable to J1 connector and PC
Download Pdf Manuals
Related Search