Lightolier ISF:302 User's Manual
Contents
1. Install the locking clip Fig 3 Note 1 The locking clip is also available separately N 0098 order separately Note 2 To lock more securely into place fold the locking tabs Fig 2 WIRE IN Remove the appropriate Pry out plug Insert the supply lead into the junction box a If using FLEXIBLE CONDUIT Use a BX connector not provided b If using FLEX BLE WIRE Insert under the wire clamp Fig 4 Connect the ground lead Fig 5 6 7 Connect the white leads NEUTRAL together and the black leads 120V together Fig 5 6 7 CEILING Cut a hole in the ceiling 3 3 4 for Model 302 or 4 3 4 for Model 402 using the mounting frame as template if applicable Fig 8 Use the screws to adjust the housing height Note Ensure that the housing is level with the ceiling Fig 9 Tighten the screws when completed Fig 9 CAUTION The socket must not be used for temporary lighting a protective glass is required for the lamp TRIM Install the trim using the appropriate sheet NOTE WARNING RISK OF FIRE Transformer contains fixture thermal protector Use only replacement transformer obtained from LIGHTOLIER BUILT IN NAILER LOCKING CLIP __ MOUNTING MOUNTING BAR MOUNTING MOUNTING BAR INPUT 120V NEUTRAL white GROUND qD THERMAL PROTECTOR LOW VOLTAGE TRANSFORMER JUNCTION BOX FIG 5 302MR NEUTRAL white FRAME FLEXIBLE WIRE PRY OUT2. PLUG JUNCTION BOX FIG 4 GROUND INPUT 120V NEUTRAL white GROUND INPUT 120V SLACK PROTECTOR JUNCTION BOX FIG 6 302ES NEUTRAL white H PROTECTOR g FIG 7 402MR JUNCTION BOX MOUNTING LOW VOLTAGE TRANSFORMER MOUNTING BAR EXPANDABLE ANCHOR CLIP
3. LICL TOLER INSTALLATION INSTRUCTIONS 12V LOW VOLTAGE INSTRUCTION SHEET AND 120V MOUNTING FRAME ISF 302 12 01 Rev 04 Retain these instructions for maintenance reference READ AND UNDERSTAND THESE INSTRUCTIONS BEFORE INSTALLING FIXTURE This fixture is intended for installation in accordance with National Electrical Code or Canadian Electrical Code as applicable and local regulations To ensure full compliance with local codes and regulations check with your local electrical inspector before installation To prevent electrical shock turn off electricity at fuse box before proceeding 302MR 402MR MOUNTING BAR For new ceilings Note 1 The mounting bars are extensible from 12 1 2 to 27 1 4 max for 302MR 302ES model and 29 for 402MR model Note 2 For off centre installation use the 20 expandable mounting bars N 1964 order separately Insert the mounting bars into the proper openings on the short side or the long side of the mounting frame Fig 2 Align the mounting bar with the bottom edge of the wood joist Fig 1 Push in the built in nailer Fig 1 MOUNTING BAR For a T Bar ceilings Position the notch in the mounting bar on top of the T bar frame Fig 10 Fasten with the metal wire or other Fig 10 Note When used with the 20 expandable mounting bars N 1964 use the anchor clip for T bar frame N 1956 order separately Fig 11 MOUNTING FRAME
Download Pdf Manuals
Related Search