Lightolier IS:LCAWTSX User's Manual
Contents
1. LIGHTOLIER IS _LCAWTSX 10 08 Rev 01 Installation Instructions for Lytespan Track LED DMX Control Accent Lighting Colorspot Luminaire CAUTION Please read these instructions before installing the luminaire To avoid electric shock turn off the power from the electric panel before beginning For safety this luminaire must be grounded Consult an electrician to make sure all the requirements of the US or Canadian Code for electricity and the current local regulations comply Keep these instructions as reference WARNING This luminaire is for ceiling installation on Lytespan track only Do not install on Monopoint Multipoint Fast Track Sloped Ceiling Adapter Extension Wand or ProSpec Track IMPORTANT Do not expose this luminaire to a room ambient temperature more than 28 C An overheating of this luminaire could reduce the performance and the time life os the light emitting diode LED Note This luminaire uses a LED Light Emitting Diode light source no maintenance is required ONE CIRCUIT TRACK INSTALLATION Align adapter lever open on bead side Fig 2 amp 3 Align locking lever 60 counter clockwise Fig 3 Insert uminaire module into the track Fig 4 Turn adapter lever clockwise Fig 4 Turn locking lever 60 Fig 4 aOfP en SS gt DOUBLE CIRCUIT INSTALLATION Lift brass contact tab approximately 14 in 7mm Fig 5 Follow previous steps 1 5 NY Bw C FOR DMX CONTROL Simply connect data cabl2. e shielded CAT5 recommended into DMX connector or insert RJ45e jack connector Fig 6 2 For daisy chain data connection connect data cable CATS into data in socket of the first luminaire then connect the data cable to the data out connector jack of the next luminaire and so on Fig 7 3 For signal termination connect a DMX signal terminator to the data out of the last luminaire in the network sold separately Fig 8 Note Hardware required for DMX control system not supplied Controller DMX512 protocol Wiring Use low capacitance shielded twisted pair stranded cables such as EIA485 RS485 or shielded CAT5 24AWG maximum run length of 300 m 1000 ft 22AWG maximum run length of 500 m 1600 ft Note Using unshielded cable may create noise in the system and may cause undesirable light output Connectors RJ45e connector 8 conductors connections 1568B B a ADAPTER LEVER INTERLOCKING LEVER FIG 2 ADAPTER LEVER ADAPTER LUMINAIRE MODULE BRASS CONTACT LOCKING LEVER FIG 4 FIG 5 DATA IN SOCKET RJ45e PLUG f FIG 6 RJ45e PLUG a RJ45e DATA OUT SOCKET ne DMX TERMINATOR FIG 8 Lightolier 631 Airport Road Fall River MA 02720 Tel 508 679 8131 Fax 508 674 4710 www lightolier com Canlyte 3015 Louis Amos Lachine Qu bec H8T 1C4 Tel 514 636 0670 Fax 514 636 0460 www canlyte com Lightolier is a Philips group brand PHILIPS
Download Pdf Manuals
Related Search