Kompernass KH 4055 Brochure
Contents
1. IP REAOSS_9706 VE 18 09 2006 14 11 Y Seite 1 WHEEL NUT WRENCH KH4055 raos W708 TEED 18 09 2006 14 11 Y Seite 2 Intended use The wheel nut wrench KH4055 is intended for loosening and tightening of wheel nuts bolts during a tyre change Technical data Length 350 mm 530 mm Wrench widths 17 mm and 19 mm Using the wheel nut wrench e Park the vehicle on a level surface put it in a low gear and set the hand break e Also secure the vehicle against rolling with appropriate eguipment A Important Follow the safety operating instructions in the operating manual for your vehicle e Loosen the wheel nuts bolts of the wheel to be changed in an alternating cross pattern before lifting the vehicle with the jack 4 Paos W708 TEED 18 09 2006 14 11 Y Seite 3 e Lift the vehicle until the wheel to be changed is no longer in contact with the floor e Remove the wheel nuts bolts in an alternating cross pattern and remove the wheel e Put the replacement wheel in position and tightly screw in the wheel nuts bolts e Lower the vehicle and retighten the wheel nuts in an alternating cross pattern with the wheel nut wrench A Important After changing the wheel check the air pressure in all tyres The wheel nuts bolts must be inspected again and retightened after approximately 50 km Do not perform any work under the vehicle while it is lifted up with the jack Te REA2. NHS 0706 DE ee 18 09 2006 14 11 i Seite 4 m KompernaB GmbH Burgstrasse 21 D 44867 Bochum www kompernass com ID No KH4055_0706_V1 _
Download Pdf Manuals
Related Search