Kathrein UFT 171si User's Manual
Contents
1. Parental control Edit programme Time etc Select main menu Channel notification Select Favourites list Delete programme Radio ON OFF Programme as signment pool Programme selection Info Help button Call up details Volume Arrow buttons D000 Select submenus and menu op tions scroll page by page through EPG or TV list Control submenus and menu options Call up TV list EXIT quit menus and submenus View last programme EXIT quit menus and submenus View last programme 6 Zoom function Selection Edit Favourites list 4 in Favourites lists KATHREIN Freeze frame function Display signal quality and level Connection and Setup Antenna Connection TV Connection Audio Connection This section is intended for the specialist dealer You only need to refer to it if you are carrying out the installation yourself The Connection Example section provides a sample configuration Do not connect the unit to the mains power until all installation work has been correctly carried out Refer to the information in the Safety instructions section DVB T TV was developed to enable you to receive a good quality TV picture anywhere provided the signal is strong enough Connect the receiver either to your conventional stand alone or community antenna through which you receive all VHF UHF signals or use an antenna developed for DVB T such as the BZD 30 or BZD 40 from2. Phoenix i EinsPlus RTL2 Super RTL VOX RTL Televisio 586MHz 10 Info 3sat BW SMHz Fav Edit Delete TV Radio AV i OK Select gt gt sort 3 Now select the programme you want to move using the arrow buttons MAGOO The programme is highlighted yellow 20 Main Menu Important Sort Channels 09 Jun 2005 09 48 Das Erste arte Phoenix EinsPlus RTL2 Super RTL VOX 9 Dr 578MHz 10 Info 3sat BW 8MHz Name Table Manual TV Radio AV lt 4 OK Select Press Sort and then o Manual To the right of the Move to query enter the slot where you want to move the programme to using the number buttons and press 09 to confirm Press er to quit the menu Confirm the Save sort prompt by pressing Enter the PIN number if required using the number buttons the factory set default is 0000 Press er to quit the menu Once you have confirmed a sort order you can no longer access the previous list Favourites 1 2 Press to access the receiver s main menu Select the Edit Programme List option and confirm your selection by pressing Press to access the Favourite menu Use the Ja and Q D buttons to switch back and forth between the displayed programmes the selected programme is highlighted yellow 21 Main Menu 22 Press the button assigned to the Favourites list to copy the selected programme to that list butt
3. lock is active all menus are locked No changes can be made without entering the password To change the password enter the old password Old PIN then the new one New PIN and then the new one again to confirm it Verify PIN If you change the password be sure to make a note of it If you forget your password the unit will require repro gramming at the factory which is not covered by warranty 31 Installation Menu Software Update Important Note 32 Updating requires a PC and a special cable RS 232 to RJ 11 port If there is a new software release for your DVB T receiver you can download it from http www kathrein de esc kathrein download receiv soft htm The website also provides information and tips on software updating via the receiver s RJ 11 data port You can order the necessary cable from ESC in Grassau Germany at the following address ESC Electronic Service Chiemgau GmbH Bahnhofstra e 108 83224 Grassau Germany Tel 49 8641 9545 0 Fax 49 8641 9545 35 amp 9545 36 E mail service esc kathrein de Internet http www esc kathrein de A factory settings reset is required following a successful software download Your old password will no longer be valid following the software update You must now enter the password 0000 or the global default password 0786 For details of how to perform the factory reset refer to page 23 Games AV Exit Back OK Sub Menu View F
4. provided the information is trans mitted by the programme provider Use the 4 buttons to switch between the programmes shown i U alii iif 09 03 Brisant iho Pil eimi I li JU TOUT i ila 1 lit ug acn JU fel i 1 NE i na il rac t ALT Switch to channel i Drev next ai To preset a programme automatically press the button The timer is then automatically set see example on left Press er to quit the Timer menu Operation Note To view the details Advanced mode press the button The following OSD on screen display is shown Use the x button to scroll through the details You can also view the details directly while the current programme is running by pressing the i button twice You see the details you want on the current running TV programme without having to switch to EPG mode first To be able to view the programme information you must leave the programme in question on for a few moments User Control Audio If you press while the current programme is running you will access Advanced Mode In it you can view details on the current programme You can still view the programme in the background Press to view the audio TV or Radio being broadcast over the reception channel Select the audio and save it by pressing 69 If the pro gramme is not transmitting language information the receiver indicates Unknown Switch between Left Ri
5. supply cable is not damaged Units with a damaged mains cate must be disconnected from the mains disconnect mains connector and repaired by a qua tied engineer before setup Oniy use ihe power pack supplied if available Risk of death due to electric shock Cleaning Disconnect the mains connector before ceaning the unt Only use a dry cloth for cleaning and only clean the outer surface Newer open the unit Touching the parts inside the uni cames a risk of death due fo electic shock Playing children Make sure that children do not push any objects into the ventilation slots Risk of death due to electric shock Earth connection The antenna system must be earthed as specified or equipotentially bonded EN 60728 11 and any national regulations must be complied with Danger due to surge voltages lightning sinkes Mains voltage Oniy operate the unit with the spected mans voltage marked on the rear of the une or on the external power pack The und may only be connected to the mains and turned on once it has been connected to the antenna and io the TV set or the cable network and PC if the mains volage is too high there is a nsk of fre Repairs Ensure that any repairs io your unit are carried out by qualified personnel Opening the unit and attempting to repair it yourself volds all warranty claims Improper work on the unit can jeopardise the elacincal safety of the unit The manufacturer accepts no lability for accidents cau
6. D RAM MByte 32 Processor clock speed MHz 165 8 Power supply Mains voltage Vac Hz 80 260 50 60 Power consumption Power Standb W lt 15 lt 10 Remote feed V mA 5 75 Connections RF input output IEC socket pin TV connection Scart socket Audio output 2 x Cinch socket Digital audio output electrical Cinch socket VCR output Hosiden socket Data port RJ 11 General Unit dimensions W x H x D mm 194 x 30 x 140 Permissible ambient temperature ko 5 to 40 Weight with power supply kg 0 35 0 85 36 Connection Diagram RJ 11 connection for IR mouse and software cable software cable not supplied The cable of the IR mouse must be forward facing when the unit is alig ned vertically otherwise it will prevent the pedestal from locking into place 37 DVB T indoor antenna BZD 30 38 The antenna s reception range is 174 230 MHz in the VHF band and 470 862 MHz in the UHF band As the BZD 30 is virtually omni directional no special alignment is required Depending on the mode of installation both vertical and horizontal polarisation can be received The remote feed 5 V 30 mA is provided via the antenna output from the connected DVB T receiver e g Kathrein UFT 171si The antenna offers an extremely low noise factor and also features a filter to block GSM interference Its stylish design and compact size 140 x 195 mm means the antenna will be a space saving and attractive enhance ment to any interior deco
7. DVB T indoor antenna e g the BZD 30 from Kathrein the antenna will need a 5 V supply If the antenna has its own power supply the default 5V OFF Inactive setting must be retained It may be necessary to update the programme list such as in the event of changes to the programme assignment I 3M Mode Auto Guard Auto Band Width 8MHz Scan Mode FTA Only Level 33 Quality 58 AutoScan Net Scan Tp Scan PID AVW lt 4 Select Frequency OK TP table Setup Menu On this menu you can perform the scan 1 Scan mode Select the scan All or FTA free to air programmes only If you perform a scan for all programmes all the programmes will be stored including the encrypted ones otherwise only the FTA programmes will be stored 2 Auto Scan All channels in the range from 177 5 to 858 MHz are scanned for programmes activate by pressing 25 Installation Menu Note 26 3 Net Scan The complete network is scanned for network infor mation The result only appears if the information is broadcast by the provider activate by pressing 4 TP Scan This can be used to locate specific channels activate by pressing 9 Press to display a TP list 5 PID Enter audio and video PID for detailed searching for specific programmes activate by pressing 9 Press o to start scanning the complete frequency range The new programming is then placed in the main list in the order of its factory pre programming If
8. Kathrein for direct reception in residential areas BZD 30 DVB T TV cannot work miracles however you must be receiving a good quality signal You may encounter problems in concrete buildings if you are using only an in door antenna If you are using or have to use an active antenna that is an antenna with a pre amplifier you can power it from the receiver s antenna input The default setting in the receiver is OFF to prevent any damage from occurring Be sure to use an antenna tuned to a 5 Volt supply such as the BZD 30 from Kathrein Connect the UFT 171si TV Scart socket and the TV set by a Scart cable If your TV has stereo capability you can receive the sound in stereo via the Scart connection If you want to play the sound on your hi fi system connectthe audiocinchsocketstotheinputsocketsonthe hi fi system with an appropriate cable Connection and Setup Dolby Connection IR Receiver Accessory The S PDIF data stream output AC 3 is intended for connection to a Dolby Digital system The infrared receiver allows you to place the receiver in a concealed location Connect the infrared receiver to the IR SENSOR socket and position it in line of sight of the remote control Inserting Batteries in the Remote Control ti Remove the cover on the rear of the remote control Insert the two batteries supplied into the remote control ensuring correct polarity this is shown on the base of the batt
9. Note OSD Settings 28 Select the video output standard PAL NTSC SECAM AUTO screen mode 4 3 or 16 9 and output signal at the TV output CVBS Composite colour video signal RGB Individual signals for Red Green Blue Language Settings OSD Settings Time Settings LED Settings System information Factory Reset AV4APp Exit Back System Setup p A 4 3Letterbox CVBS 4 Screen Mode CVBS RGB Selection of the screen mode 4 3 or 16 9 always depends on your TV set and not on the programme you selected Select the menu transparency and display parameters using the Q buttons Language Settings TV Settings Time Settings LED Settings System information Factory Reset AV i Exit Back System Setup r OSD Timeout p r Installation Menu Clock Parameters Note The time and date must be programmed to enable the receiver to display the correct data in information messages and for operation of the timer The internal clock is set as follows a Apply the broadcast time default In this case the time difference between GMT and the location in Germany 2 hours in Summer 1 hour in Winter must be allowed for b If you select Off in the first field you will need to enter the time and date manually using the number pad System Setup Language Settings TV Settings OSD Settings Time zone Gmt 1 Set local time 12 09 25 Set Date 09 06 05 LED Settings Sys
10. Operating Manual DVB T Receiver UFT 171si KATHREIN Antennen Electronic Preface Dear customer This Operating Manual is intended to help you make the fullest use of the extensive range of functions offered by your new DVB T receiver We have tried to make the operating instructions as easy as possible to understand and to keep them as concise as possible You have chosen DVB T a TV standard which provided reception conditions are appropriate will provide you with optimum reception including in combination with an adapted indoor outdoor or roof antenna such as Kathrein s BZD series with no ghosting or any of the other disad vantages of conventional TV viewing We wish you good reception and much pleasure using your new DVB T receiver Your KATHREIN Team If you should experience any unexpected problems with your UFT 171si please contact your specialist dealer or our hotline KATHREIN Werke KG Technical Support Service Tel 49 8031 184 700 Fax 49 8031 184 676 Internet www kathrein de E mail technische kundenberatung kathrein de Our equipment is factory fitted with the most recent software version We are constantly working on adapting the software to the wishes of our customers and to developments in technology The Software and Programme List Update section contains additional information Contents Preface Contents Safety Instructions and Important Information Controls Di
11. dio Favourite List The clock must be correctly set to ensure the timer works properly see Installation Menu System Setup Setting the Time Select the timer number 1 to 8 using the buttons 2 Activate the timer by selecting Timer mode once daily weekly or sleep timer receiver switches off automati cally after a preset time 3 To select the date press the ox button while in the Date field 4 A calendar appears and you can then select the desired date using the MAOH buttons 5 Press ox to confirm your selection gt Alternatively Select the date field day month year using the JE buttons and enter the date numerically using the number buttons 6 Then select the start and end times Press gt to activate the input field The first time digit is underscored in black and you can now use the number buttons to enter the time you want Main Menu 7 To select the programme in the Channel field press og The programme list appears from which you can select the programme you want using the QMO buttons Press to confirm your selection and import the pro gramme into the timer 8 Press er to quit the menu Organising Programmes and Favourites Sort 1 Press f to access the receiver s main menu 2 Use the 4 buttons to select the Edit Programme List option and confirm your selection by pressing TV List 09 Jun 2005 09 48 Das Erste arte
12. enu V Sam WELS N il I i Menu 11 Using the Front Panel Display Using the Front Panel Display The unit has three operating buttons on its front panel You can use the Standby button on the left to switch the receiver from Standby to active and back again The two arrow buttons on the right side front are used to switch programmes There are two possible ways of installing the receiver horizontal vertical To enable you to view the readouts on the display at all times we have installed two displays on the UFT 171si one for horizontal installation and one for vertical You can choose on the Installation menu which display you want to activate see Installation System Setup Setting the LED Operation Programme Selection TV and Radio For ideal reception your terrestrial antenna must be optimally aligned Use the X buttons to select the next or previous pro gramme To select a programme from the TV list programme list press the x button TV List arte Phoenix EinsPlus RTL2 Select the programme using the v a buttons and press to view it The selected programme appears in full screen view mode You can move from page to page in this list and the following ones using the 2 gt buttons You can also select a programme using the number pad buttons Leading zeroes e g 001 for the first programme in the TV list must n
13. ery compartment Slide the cover back onto the housing until it locks in place Used batteries are special waste Do not throw used batteries into your household waste take them to a collection point for old batteries Electronic equipment is not household waste In accor dance with directive 2002 96 EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of 27th January 2003 on used electrical and electronic equipment it must be disposed of properly At the end of its service life take this unit for disposal at a designated public collection point Initial Setup Important Information Getting Started Before using the receiver for the first time make sure that it has been assembled installed and connected properly as described in the Connection and Setup section and in accordance with the safety instructions e Switch on the TV e Select the AV programme location for your receiver connection Now connect the receiver to the socket outlet Press Standby to switch the receiver on The following on screen display appears First Installation Antenna Disable SV OFF AutoScan Use the Q buttons to select the menu language you want to use e Use the 4 buttons to move to the Antenna line and select yourdesired setting using the buttons Selection inactive for an inactive antenna and Active when an active antenna is connected to the antenna input Use the v a butto
14. ght Stereo sound using the button 2CH 3 DD Pause Freeze Frame and Zoom Signal Quality Display Press m to switch to freeze frame and press m to zoom the picture Adjust the receiver to the programme you want to receive and press the button The display indicates the level and quality of the signal being received see example on left Press to quit the display Level 68 586MHz Quality 72 BW 8MHz 0009 ZDF 09 30 10 15 Alle meine T chter 10 15 10 35 Reich und Sch n Main Menu Accessing the Main Menu MENU Button Press e to access the main menu select the submenu you want and press ax Five submenus are available as detailed in the following 1 Timer Menu for preset programme recording or for automatic stop 2 Edit Programme List Sort edit and delete programmes 3 Edit Favourites List Organise the channels store sort edit and move 4 Installation Menus for setting up the antenna the channels the system menus and the parental control 5 Games Two games are available Main Menu Timer Edit Channel List Edit Favourite List AV Exit Back OK Sub Menu View Main Menu Timer Setting Automatic Programming Note The timer can be programmed either by way of the EPG see page 15 or as follows Timer Current Time 09 Jun 2005 09 47 Timer Number 1 Timer Mode One Time Start Date 09 06 05 Start Time 13 00 Stop Date 09 06 05 Stop Time 13 10 OK TV Ra
15. l 4 3 or 16 9 output Programme scan e Manual entry of PID data possible Programme position sort function Mute function e Remote feed of an active DVB T antenna via RF input Infrared remote control Power switch e With external infrared sensor for concealed receiver installation 1 Only displayed if this information is broadcast by the programme provider 2 Cable 8 pin Mini DIN Hosiden socket onto Scart not supplied The cable can be ordered as required from ESC for address see Software Update 35 Technical Features and Data UFT 171si Technical Data Type UFT 171si Order no 20210070 Colour Silver RF properties Input frequency range MHz 174 230 and 470 862 Input level range dBuV 28 86 with 16 QAM FM threshold dB Channel bandwidth MHz 718 switchable Modulation mode COFDM 2k 8k Mapping QPSK 16 QAM 64 QAM Guard interval 1 4 1 8 1 16 1 32 FEC 1 2 2 3 3 4 5 6 7 8 TV system Video Modulation FEC de multiplexer DVB T standard Video resolution CCIR 601 720 x 576 lines Video decoding MPEG 1 and 2 compatible Input data rate MSymbol s 5 32 Video bit rate MBits s 1 5 15 Frequency range MHz 0 02 5 Output voltage Vss 1 S N dB gt 53 TV system Audio Audio decoding MPEG 1 and 2 Layer 1 and 2 Sampling rate kHz 32 44 1 48 Frequency range kHz 0 04 20 Output voltage mVss Typical 770 S N dB gt 65 Memory Flash RAM MByte 1 S
16. ns to move to the Auto Scan line e Press ox to confirm your settings and start the scan The receiver then jumps automatically to the Programme search menu and starts autoscanning the complete frequency range Initial Setup Note The programmes channels found by the receiver are stored in the preset programme list You can then use the g buttons as usual to switch between the programmes Each time you switch on the unit the last reception status is restored If the message Poor or no signal appears on the screen as well as the display for the last programme received check the installation of the system and or the receiver settings If only specific programmes are affected the programme provider s signal may be down Please check the time is correct according to whether you are on Summer or Winter time see Installation System Setup Setting the Time If you have selected an incorrect time zone you will get incorrect programme times If you have changed the basic settings of your receiver and want to cancel them you can select the factory settings at any time and restore the original setup see Installation System Setup Factory Reset enu Structure ime urrent Tim D9 Jun 2005 09 mi 0 il im tar I 16 0 X i LI N ub Men al m ili 17 3 7 0 m i hann FY i mei I installation Menu Scan 3 m 17 rental ntro X Xi aci 1 ub M
17. on Favourites list 1 button Favourites list 2 button Favourites list 3 button Favourites list 4 When you press the coloured button corresponding to the list you want to use its number is displayed after the programme To cancel your selection press the same coloured button again You can assign any programme to all four Favourites lists Press es to quit the menu Edit 1 2 Press to access the receiver s main menu Select the Edit Programme List option and confirm your selection by pressing Press 8 to access the Edit menu Use the Ja and JE buttons to switch back and forth between the displayed programmes the selected programme is highlighted yellow You now have two options Block a programme by pressing You are prompted to enter the PIN code where necessary or Skip a programme by pressing To undo blocking or skipping a programme press the same coloured button you pressed to perform the original action Press es to quit the menu Main Menu Caution Delete 1 2 Press m to access the receiver s main menu Select the Edit Programme List option and confirm your selection by pressing Now press to access the Delete menu Use the 4 and OQO buttons to switch back and forth between the displayed programmes the selected pro gramme is highlighted yellow To delete the programme press o an X is dis
18. ot be entered as the button is used to switch over the switching voltage on the Scart socket Press a to switch from the TV list to the radio list Select the programmes as in the TV list using the 4 buttons and the x button Press to call up the Favourites lists and then press Press Note This works only when DVB T radio programmes are being broadcast 2 DKULTUR Operation Channel Notification Videotext Teletext Press to choose one of the four Favourites lists Select the programmes as in the TV list using the G buttons and the ex button Press or access a programme using the button to hide the lists again Organize Favorite 1 2 Phoenix VOX 4 RTL Televisio If you switch programmes the following information is dis played at the bottom of the screen Programme type TV or radio The programme name EPG Electronic Programme Guide reception is indicated by the letter E Videotext Teletext reception is indicated by the letter T Current and next programme P TV 0001 Das Erste 09 03 09 30 Brisant 09 30 11 00 Heimlicher Tanz EN The receiver continuously transmits the Videotext Teletext signal if available to the TV set You can call up and use the Videotext Teletext as usual by way of your TV s remote control Operation Electronic Programme Guide EPG The EPG Electronic Programme Guide button displays programme information
19. played after the programme being deleted Press er to delete the selected programme To delete all programmes instead of the o button press and confirm the deletion by pressing Where configured you must enter your PIN and confirm it by pressing the button To quit the menu without saving your changes press es If you delete one or more channels you will only be able to relocate them by running a new channel search 23 Installation Menu Installation Menu ur Scan System Setup Parental Control AV Exit Back OK Sub Menu View Adapting the receiver to your reception system 1 Set up the antenna Select 5 V supply Active lnactive to antenna using the CIP buttons 2 Scan Auto Scan full scan Net Scan network scan TP Scan specific channels and PID Scan search for a specific programme by its PID 3 System Setup Adapt to your TV set and make other custom settings or reset to the factory defaults You can restore the factory default settings with which your receiver was shipped factory reset Important In this process all the changes you have made to the programming of the receiverare deleted 4 Parental Control Block menu access and password change The receiver is pre programmed and shipped with an Note installation menu protected by the default password 0000 24 Installation Menu Antenna Type Note Scan Antenna setting If you are using a
20. r The supplied accessories include a pedestal for ease of installation a wall bracket with fixings and a 2 metre connecting cable DVB T Outdoor Antenna BZD 40 Active VHF UHF antenna for outdoor use in receiving digital terrestrial TV and radio programmes DVB T Easy wall or balcony mounting using supplied installation accessories The antenna s reception range is 174 230 MHz in the VHF band and 470 862 MHz in the UHF band The remote feed 5 V 30 mA is provided via the antenna output from the connected DVB T receiver e g Kathrein UFT 171si The antenna offers an extremely low noise factor and also features a filter to block GSM interference The supplied accessories include a wall balcony mounting bracket a 10 metre connecting cable an F connector and IEC connector and an operating manual 39 Internet www kathrein de KATHREIN Werke KG phone 49 8031 184 0 Fax 49 8031 184 306 Anton Kathrein Stra e 1 3 P O Box 100 444 83004 Rosenheim GERMANY KATHREIN Antennen Electronic 936 2799 A 0605 ZWT Technical data subject to change
21. rom the main menu use the 4 buttons to select Games and press e You can then choose one of the twogames listed After selecting a game follow the instructions given Note on screen Games are controlled using the buttons as indicated below MAPPEN Tetris 33 Games Snake VEI TU CE U NET ITE EE GT ETTGETETTEGEN i Fact ai Ve Vs Wt Wt FS TPP OT Ve FT 34 Technical Features and Data UFT 171si Technical Features The DVB T receiver UFT 171si has the following features Reception of FIA digital terrestrial TV and satellite radio programmes Tuner with loop through output 1 000 programme memory positions Menu guided first installation e Electronic Programme Guide EPG for one week with short programme descriptions e 8 timers timer programming also possible using EPG e Software Download via PC RS 232 4 favourite programme lists Automatic date and time setting via DVB data stream e On screen menu display OSD in 11 languages German Spanish Italian Czech French Portuguese Polish Turkish Hungarian Dutch and English 2 x 2 character LED display Language selection for multilingual broadcasts Electrical audio output for Dolby Digital data stream AC 3 Composite colour S VHS and RGB signal output programmable via Scart socket VCR output via Hosiden socket 2 Videotext Teletext generation for playback on TV Automatic format recognition optiona
22. sed by fhe user opening the unit Connections Incorrect wiring of the connections can lead to malfunctions or defects on the unit Long periods of absence storms Always turn off the unit at the mains swich if you will be absent for a long time or there is a storm If your unit does not have a mains switch you can disconnect A from the mains by unplugging tre mains connector This also appes to the other equipment connected to the unit Isolation from the cable network is also recommended Note any tener programs receiver and turn the unit on again promptly before the recording time Installation location All stertroms equipment generates heat However the heating of this unit bes within the permissie range Sensitive furniture surfaces and veneers may become discoloured by the effects of constant heat over time The feet of the unit can 3050 cause colour changes to treated furniture surfaces lf necessary place the unit om a suitable stable and flat base Ventilation The heat generated in this unit is adequately dissipated However the unt should never be imsta ed in a cupboard or on shelves with inadequate ventilation Never cover the cooling slots on the unit e g with other soupment magazines tablecloths or curtains De not place any objects on top of the unt and maintain a clearance of at least 10 cm above the unit so that the heat generated can be dissipated with no obstructions Moisture sunlight heat Protect the uni
23. splays and Connections Front View Rear View Side View Remote Control Function Buttons Connection and Setup Antenna Connection TV Connection Audio Connection Dolby Connection IR Receiver Accessory Inserting Batteries in the Remote Control Initial Setup Important Information Getting Started Menu Structure Using the Front Panel Display Using the Front Panel Display User Control Programme Selection TV and Radio Channel Notification Videotext Teletext Electronic Programme Guide EPG Audio Pause Freeze frame and Zoom Signal Quality Display Main Menu Accessing the Main Menu MENU Button Timer Setting Automatic Programming Organising Programmes and Favourites Installation Menu Antenna Type Scan System Configuration Language Settings Setting up the TV Setting up the OSD Clock Parameters Setting the LED System Information Factory Reset Parental Control Software Update Games Tetris Snake Technical Features and Data UFT 171si Technical Features Technical Data Connection Diagram DVB T Indoor Antenna BZD 30 DVB T Outdoor antenna BZD 40 OOO 000MNNNN 90010010 A O N Safety Instructions and Important Information DANGER WARNING CAUTION This page contains important information about the operation installation locaton and connection of the unit Read these instructions carefully before staring to use the unit Mains cable Make sure that the mains cable power
24. t against moisture dripping and splashed water do not place any filed objects such as vases on top of the unit Do not place the unt close to a heater or expose it to direct sunlight and oo not operate it in damp locations Only use the unit in a moderate climate net in tropical conditions Controls Displays and Connections This section provides a brief description of all the controls displays and connections Front View TET nn 10000000 Front View View Rear View 000 View ss ano Power switch ON OFF es dudi connection signal as on Scart socket 1 2 Display for vertical installation Optical at stream output SPDIF Sony Philips Digital Interchange Format for Dolby Digital AC 3 audio 3 Display for horizontal installation Audio outputs 2 cinch sockets L R channel Programme advance buttons Scart socket for TV connection SideView 16 Loop through output RF signal RJ 11 connection for IR mouse and 7 Mains power cable software cable software cable not supplied 1 Cable 8 pn Mini DIN Hosiden socket onto Scart not supplied You can order the cable as required from ESC for address see Software Update Controls Displays and Connections Remote Control Function Buttons The button symbols presented here can also be found in the description of the operating steps Mute on off Power on Power off Standby O Numerical input for programmes Audio mode
25. tem information Factory Reset AV i Exit Back It may be that some programmes do not transmit the correct GMT time In this case the receiver will display an incor rect time To display the previous time tune in to a different programme and wait a few minutes for the receiver to display the correct time again 29 Installation Menu Setting the LED Select LED display 1 horizontal receiver alignment 2 vertical receiver alignment When reversed the LED readout can be displayed mirrored so that it remains readable in any installation position System Information Display of the receiver s hardware and software versions 30 Installation Menu Factory Reset Note Parental Control Attention This menu is protected by the default password 0000 If you have changed the receiver s programming and wish to reset it to its factory defaults select this line Press and enter the password After about a minute the memory will be updated Turn the receiver off and back on again at its power switch The same display appears as during first installation The receiver is reset to its factory configuration Any changes you may have made are lost Parental Control Change Password Old PIN New PIN Verify PIN AW lt 4 Lock Unlock access to menu On this menu you can lock all the menus to prevent incorrect settings from accidentally being made and you can change the password When the parental control
26. you press instead of the button the scan is not started If you are in a catchment area covered by two DVB T net works it may be that the AutoScan causes some channels to be duplicated in your channel list You can simply leave them or you can choose to use the programme offering the best picture reception and delete the other one Press to scan for a specific channel The programme found are placed at the end of the programme list PID Programme Identification input Press f enter the video and audio PID and press again The programme is placed at the end of the main list tagged TV CH Installation Menu System Configuration Language Settings Access to the language menus The following menu language options are available German Spanish Italian Czech French Portuguese Polish Turkish Hungarian Dutch and English Also System Setup TV Settings 1st audio lang English OSD Settings 2st audio lang English Time Settings Subtitle lang English LED Settings System information Factory Reset AV lt 4 gt Exit Back Access to the language menus The following menu language options are available German Spanish Italian Czech French Portuguese Polish Turkish Hungarian Dutch and English You can also select your preferred languages for audio and subtitles here Select using the 4 and OQO buttons Confirm your settings by pressing ed 27 Installation Menu TV Settings
Download Pdf Manuals
Related Search