JVC RC-BX75VSL User's Manual
Contents
1. PROGRAM PLAY You can program the playing order of the tracks up to 20 for an audio CD video CD and 99 for a MP3 CD For Audio CD and VCD 1 In stop mode press PROG The PROG indicator blinks on the display 2 Select a desired track with 1 or number button and then press PROG again PO1 program number 1 and Txx programmed track number appear The PROG indicator stays lit 3 Repeat 1 and 2 to program other tracks the number of programs increases Then press Il to start program play To confirm the program press W to return to stop mode and then press I PI To clear the program press W in stop mode CLr PrOG appears and the PROG indicator goes out Opening the CD door also clears the program To skip to the track during playback press I lt P1 e When you program the VCD with PBC be sure that PBC indicator goes out on the display PBC OFF For MP3 CD In stop mode press PROG The PROG indicator blinks on the display Select a desired album with ALBUM e g A02 T001 Select a desired track in the selected album with TITLE or number button e g A02 T015 Press PROG again The PROG indicator stays lit Repeat 1 to 4 to program other tracks the number of programs increases Then press H to start program play aroON gt How to confirm and clear the program is the same as for the audio CD OTHER OPERATIONS FOR AUDIO CD MP32. playback with the number button Then playback automatically starts from that position When a video CD with the PBC function is used with the PBC ON this function dose not work A B REPEAT Repeating section A B VCD Audio CD You can repeatedly play a certain passage or scene by specifying the points A and B 1 During playback press A B REPEAT at the start point you want to repeat A appears on the display 2 Press A B REPEAT at the end point A B appears on the display and the section A B is repeatedly played To exit A B repeat playback press A B REPEAT once again A B disappears and normal playback takes place A B repeat playback also exits if the track selection operation is made e You may use A B repeat playback over 2 or more tracks Note For the button operations of RESUME PROGRAM REPEAT and RANDOM see US ING THE CD PLAYER FOR AUDIO CD MP3 CD CARE AND MAINTENANCE CLEANING THE EXTERIOR e Disconnect the system from AC power before cleaning the exterior of the unit with a soft dust cloth HANDLING CDs e Do not touch the signal surfaces Hold by the edges or by one edge and the hole e Do not affix labels or adhesive tape to the label surfaces Also do not scratch or damage the label e Discs rotate at high speed inside the player Do not use damaged cracked or warped discs CLEANING CDs e Dirty discs can cause poor sound quality Always keep discs clean by wiping them gent
3. 1 of selected album Selecting a Track MP3 Only 1 After selecting the album press TITLE to skip to the previous next track in the current album e g A02 T015 track number 15 in the album number 2 on the display e You can select a desired track with the number button In this case playback automatically starts 2 Press H to start playback the selected track RESUME PLAY AUDIO CD ONLY Press RESUME Then playback starts from the position where you have stopped RANDOM PLAY In stop mode press RANDOM The RANDOM indicator lights on the display and playback starts in random order Random play continues until you stop the CD You can also enter the random play mode during playback To exit the random play mode press RAN DOM once again or press m Note that the RANDOM operation is ignored in program play mode REPEAT PLAY During playback press REPEAT Each time you press it the display changes as follows and each repeat play takes place REPEAT for 1 track repeat REPEAT GROUP for all tracks in the current album MP3 only gt REPEAT ALL for all tracks back to the beginning On the TV REPEAT ALB is displayed instead of REPEAT GROUP The repeat mode can be mixed with the other modes as follows Mode REPEAT REPEAT ALL REPEAT GROUP MP3 only Play Current 1 track All tracks All tracks in the current album Program Current 1 track All programmed tracks E
4. 220V 230V VOLTAGE SELECTOR NTSC PAL SWITCH R20 D 13F Battery Compartment SETTING THE TV SYSTEM SELECTOR Open the battery compartment cover and set the TV system selector to PAL or NTSC according to the TV system you use INSERTING BATTERIES NOT SUPPLIED Insert 6 batteries R20 D 13F and you can take your system just about anywhere Open the battery compartment cover and insert batteries as shown Note The battery power will be switched off when you plugged the power cord into the AC power jack on the unit Inserting Batteries into the Remote Control Unit Match the polarity and of the batteries R03 UM 4 AAA 24F CAUTION To avoid battery leakage or explosion handle batteries properly If you re not going to use your system for a month or more remove the batteries from the battery compartment Dispose of batteries in the proper manner according to federal state and local regulations Do not mix with different battery types or with new and old ones or do not attempt to charge a battery not intended to be recharged Discard leaky batteries immediately Leaking batteries can cause skin burns or other personal injury SUPPLYING AC POWER Plug the power cord into the AC power jack on the back of the unit and into an AC power outlet Note To switch off the system completely unplug the power cord CONNECTING TO TV Connect the system to your TV or VCR s video audio inputs to enjoy
5. AY REC lt lt gt gt SS REC e Press to record from the radio or CD VCD player PLAY lt Press to play the cassette tape REW gt From stop or play mode press to rewind the tape toward the beginning FF lt lt From stop or play mode press to advance the tape toward the end STOP EJECT m 4 Press to stop the cassette tape or to open the cassette compartment door when no buttons are pressed down PAUSE II Press to interrupt playback or recording Pressing it again will resume playback or recording Forward direction PLAYING A CASSETTE TAPE 1 Move the FUNCTION switch to Q TAPE 2 Press STOP EJECT m 4 to open the cassette compartment door 3 Insert a cassette tape into the compartment with the open edge facing up Tape travels from the right to the left 4 Close the door securely 5 Press REW gt or FF lt lt to move the tape to the desired starting point if necessary 6 Press PLAY lt to start playing the tape The cassette tape plays until it reaches the end of the side then it automatically stops RECORDING ON A CASSETTE TAPE You can record from the radio or the CD VCD player For best recording use the type tape normal bias tape e It may be unlawful to record or play back copyrighted material without the consent of the copyright owner ERASE PROTECTION When you record on new material the cassette deck records over whateve
6. CD Refer to VARIOUS FUNCTIONS USING THE VCD PLAYER Be sure that the system is connected to the TV PLAYING A VIDEO CD Playing a Video CD with PBC For VCD Version 2 0 Only The system provides a PBC Playback Control function which utilizes a procedure menu selection programmed in the video CD 1 Insert a video CD with PBC The PBC indicator lights on the display The menu screen appears on the TV 2 Press ka gt i to move through the previous next menu page and specify the item track in the menu with the number button Then the selected track is played e Once the video CD with PBC has stopped the PBC indicator goes out Pressing PBC replays the video CD To stop playing the video CD press W To pause the picture press gt II To cancel pause press gt I again To return to the menu page at any time press RETURN To select the desired track press the number button To select the previous next track press lt PI To search play at high speed during playback press lt gt Each time you press it the playback speed changes During search play no sound comes out Playing a Video CD without using PBC PBC OFF 1 Insert a video CD with PBC The menu screen appears on the TV 2 Press PBC to turn off PBC After a while the PBC indicator goes out and the video CD is played sequentially from the first track During playback you can stop pause skip or search play in the sa
7. MW JVC CD PORTABLE SYSTEM RC BX75VSL RC BX75VWT For Customer Use Enter below the Model No and Serial No which are located either on the rear bottom or side of the player Retain this information for future reference COMPACT DIGITAL AUDIO Model No fy INSTRUCTIONS Model No LVT0933 001B U 88 00075 00 CAUTION THIS PRODUCT UTILIZES A LASER USE OF CONTROLS OR ADJUST MENTS OR PERFORMANCE OF PRO CLASS 1 CEDURES OTHER THAN THOSE LASER PRODUCT SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPO SURE CLASS 1 LASER PRODUCT DANGER Invisible laser radiation when open and interlock failed or defeated DANGER Invisible laser VARNING Osynlig laser Avoid direct exposure to beam a a 3 CAUTION Do not open the top cover AVOID DIRECT EXPOSURE urkopplad Betrakta ej There are no user serviceable parts in TO BEAM 6 strlen 6 side the Unit leave all servicing to quali fied service personnel Ph ADVARSEL Usynlig laser VARO Avattaessa ja suo str ling ved bning nar jalukitus ohitettaessa olet sikkerhedsafbrydere er ude alttiina n kym tt m lle af funktion Undg uds t lasersateilylle Ala katso telse for str ling d s teeseen f WARNING LABEL PLACED INSIDE THE UNIT PRECAUTIONS e Never open the cabinet under any circumstances Never ope
8. by its edges and carefully take it off Note When operating an MP3 CD it may take time until the CD responds to the button com mand When the unit is connected to the TV the disc information on MP3 appears on the TV USING THE CD PLAYER FOR AUDIO PLAYING AN AUDIO CD MP3 CD Press I to play all the tracks in order starting with Track 1 The current track number and elapsed playing time appear on the display AUDIO CD MP3 CD To stop playing the CD press STOP m To pause press II The playing time blinks To cancel pause press gt I again SELECTING A TRACK AUDIO CD ONLY During playback press lt gt on the unit or I lt mI on the remote control to skip to the previous next track or press the number button to specify the tack number Then the selected track starts playing e You can also select a track in stop mode SEARCH PLAY AUDIO CD ONLY During playback press and hold lt gt to move backwards forward through a track at high speed You can quickly find a particular passage in the current track SELECTING AN ALBUM AND TRACK MP3 ONLY When the TV is connected the disc imformation is displayed on the TV While viewing this you can select an album or a track Selecting an Album MP3 Only 1 In stop mode or during playback press ALBUM to select a desired album number e g A02 album number 2 T001 on the display 2 Press H to start playback the track number
9. ding is not supported e The disc must be finalized e Files other than MP3 MP3 are ignored Button Expression Description of the unit s buttons is omitted since it is the same as that of the remote control unit s buttons except the following buttons Track selection Remote control a Search Play Remote control lt gt Unit Pressing amp holding SKIP SEARCH lt lt gt gt 1 e When any unacceptable button operation is made Err Error will appear on the display Unit SKIP SEARCH lt lt 4 gt gt Using the Number Buttons To specify the track number press the number buttons as follows For track number 5 press 5 For track number 10 press 10 and then 0 For track number 25 press 10 twice and then 5 LOADING A CD Move the FUNCTION switch to CD VCD NO DISC appears if no CD is loaded Press CD OPEN to open the CD door Place a CD into the tray with the label facing up Close the CD door READING appears for a few seconds For audio CD VCD The total number of tracks and the playing time of the disc appear For video CD VCD and VCD version 2 0 indicators will light on the display PoON gt For MP3 CD The total album number and the total track number of the disc briefly appears and then changes to the first album and track numbers Also the MP3 indicator appears on the display 5 To remove the CD press CD OPEN A grasp the CD
10. ly with a soft cloth from the inner edge toward the outer perimeter e f a disc becomes dirty wet a soft cloth in water wring it out well wipe the dirt away gently and then remove any water drops with a dry cloth e Do not use record cleaning sprays or antistatic agents on discs Also never clean discs with benzene thinner or other volatile solvents which may cause damage to the disc surface TAPE CARE e Don t expose cassette tapes to sunlight or store in hot places High temperatures may warp the shell or damage the tape itself e Keep cassette tapes in their boxes when not in use e Cassette tapes can be erased by magnetic fields produced by magnets electric motors electrical trans formers and other devices Keep tapes away from magnets and magnetic fields CLEANING THE TAPE HEADS Iron oxide particles from the magnetic tape can build up on the parts that come in contact with the tape These deposits can cause incomplete erasure muffled playback sound and might prevent automatic stop To clean a cassette deck open the compartment door push the PLAY button and gently clean the heads capstan and pinch wheel with a head cleaner Always unplug the power cord before cleaning and allow 30 minutes drying time when using a liquid cleaner Clean heads after every 25 hours of use e Demagnetize the head occasionally with a head demagnetizing cassette available from many audio equipment stores e Never use any metal
11. me manner as for the audio CD Playing a Video CD without PBC You can play the video CD in the same manner as for the audio CD RESUME PLAY Press RESUME Then playback starts from the position where you have stopped When a video CD with the PBC function is used with the PBC ON the resume play does not work VARIOUS FUNCTIONS USE REMOT OSD On screen display VCD Audio CD You can view operational information on TV Each time you press OSD OSD function turns on and off VIEW Viewing up to 9 pictures VCD Press VIEW The picture page showing up to 9 tracks is displayed on the TV and the first 20 seconds of each track is played sequentially To view the previous next picture page press ma gt i To normally play the track being briefly played press gt II To normally play a desired track in the picture page select the track number with the number button SLOW Playback speed reduction VCD During playback press SLOW Each time you press it playback speed changes to 1 2 1 4 1 8 and PLAY normal speed During slow playback no sound comes out L R Channel selection VCD Each time you press L R the channel output changes in the order of MONO Left MONO Right and STEREO O A AA L R L R GO TO Starting playback from the designated time VCD Audio CD 1 Press GO TO Then min sec appears on the display and on the TV 2 Enter the time you want to start
12. nected to TV Select the correct TV system Remote control does not work Replace the batteries SPECIFICATIONS Amplifier Output Power 1 W x 2 at 10 THD Speaker Impedance 8 ohm 8 5 cm x 2 Phones 15 mW ch output into 32 ohms Impedance 16 ohms 1kohms CD Sampling Frequency 44 1 kHz D A Converter 1 bit linear Frequency Response 100 Hz 20 kHz Dynamic Range 70 dB min Harmonic Distortion 1 5 max Channel Separation 40 dB min Signal to Noise ratio 50 dB min Number of programmable 20 audio CD VCD 99 MP3 CD tracks MPEG 1 VCD version 2 0 MPEG 1 layer 3 MP3 CD MPEG AUDIO MP3 CD bit rate 32 256 kbps Radio Tuning Range FM 88 MHz 108 MHz MW 530 kHz 1600 kHz SW 6 MHz 17 MHz Antenna FM SW Rod Antenna MW Ferrite Bar Antenna Cassette Tape Speed 4 75 cm sec Wow amp Flutter 0 35 WTD Recording System AC Bias Erase System Magnetic Erase S N 35 dB min Track System 4 track 2 channel stereo Frequency Range 125 Hz 6300 Hz Normal General Power Supply 110V 127V 220V 230V 50 Hz 60 Hz Power Consumption Unit Dimension Mass 2 EN DC 9 V R20 D 13F or equivalent size battery x 6 15 W power on 3W Standby 403 W x 169 H x 237 D mm 3 3 kg without batteries JVC VICTOR COMPANY OF JAPAN LIMITED Printed in China V 0902HMOCREORI
13. objects on or near the tape heads e Do not allow any cleaning material to fall into the tape assembly TROUBLESHOOTING TIPS Problem Solution System doesn t turn Make sure power cord is securely plugged into the AC power outlet or that the batteries are fresh on e Unplug the unit for a moment and then plug it back in e Check the outlet by plugging in another device e Adjust volume setting No sound e Make sure you ve selected the correct function CD VCD TAPE or RADIO Poor radio reception d Adjust the FM SW rod antenna for better FM SW reception Adjust the FINE TUNE knob for SW reception Rotate the unit to achieve better MW reception Try turning off electrical appliances near the unit such as hair dryers vacuum cleaners or fluorescent lights CD doesn t play Make sure the tray contains a CD Make sure the CD s label is facing up Make sure that Pause mode is not activated Make sure CD function is selected CD sound skips Clean the CD as explained in Care and Maintenance Check CD for warping scratches or other damage Check for vibration or shock that may affect the unit move system if necessary Distorted or noisy Inspect the recording head and clean it if image distorted on TV recordings necessary l l g e Demagnetize recording head as explained in Care and Maintenance No video or video e Audio video cord is not con
14. r is on a tape To protect a tape from accidental erasure break off one or both plastic tabs one for each tape side on the top of the cassette tape If you decide later to record on the tape seal the hole with a piece of cellophane tape CAUTION A little bit of slack in your tapes can cause scratches on the tape or worse yet the tape could break If you notice some slack in the tape use a pencil to tighten it up before you insert in RECORDING FROM THE RADIO Insert a blank cassette tape Move the FUNCTION switch to RADIO and tune in desired station Press REC to start recording REC and PLAY lt lock down Press STOP EJECT m amp to end recording To turn off the radio slide the FUNCTION switch to 0 TAPE a AD SYNCHRO RECORDING FROM CDs Move the FUNCTION switch to CD VCD 2 Insert a blank cassette tape 3 Insert the CD you want to record If you need program the CD tracks e When you record from video CD with PBC press PBC on the remote control unit to turn off PBC indicator on the display PBC OFF Then press STOP m to stop the video CD 4 Press REC e The CD is automatically played and recorded onto the tape 5 To stop at any position during recording press STOP EJECT E 4 ai To Record from the Desired Track In step 4 above skip the CD track with the SKIP SEARCH kt gt gt I on the unit or the I lt gt or the number buttons on the remote control unit and then immediately pres
15. rate this product with the cabinet re moved Any repairs of internal adjustments should be made only by a trained service technician e Do not touch the system with wet hands If any liquid enters the cabinet take the system to a trained service technician for inspection WARNING CAUTION TO REDUCE THE RISK OF FIRE OR ELECTRIC A SHOCK DO NOT EXPOSE THIS APPLIANCE TO THE LIGHTNING CAUTON T0 EDUCE TE THE EXCLAMATION RAIN OR MOISTURE TRIANGLE IS A WARNING SIGN ALERTING YOU OF IMPORTANT INSTRUCTIONS ACCOMPANYING THE PRODUCT SEE MARKING ON BOTTOM BACK OF PRODUCT SUPPLIED ACCESSORIES Remote control unit 1 pe Power cord cese0 1 pe Audio Video cord 1 pe Accommodated in the battery compartment Thank you for purchasing this JVC product Please read the instructions carefully before starting operation to be sure to obtain optimum performance and a longer service life from the system FIRST THINGS This portable system operates on battery or AC power SETTING THE VOLTAGE SELECTOR To avoid damaging the unit select the voltage range before plugging the power cord into the unit Open the battery compartment cover on the back of the unit by pressing down the two tabs and pulling out the cover Select the voltage range for your area with the VOLTAGE SELECTOR inside the battery compart ment by using a screwdriver or similar AC power jack Antenna 110V 127V Ht
16. s REC Note About 5 seconds after the TRACK selection the display returns to the TOC display TIPS e To temporarily pause the recording press PAUSE tl on the cassette deck Press PAUSE I again to resume recording Note that using STOP EJECT m 4 instead of PAUSE I for this purpose is not recommended as the recorded sound may be distorted BEFORE USING THE CD VCD PL The display and the remote control unit are effective only for the CD VCD player The detailed operations for the normal CDs audio CDs and MP3 CDs and the video CDs are separately explained in USING THE CD PLAYER and USING THE VCD PLAYER UNIT S BUTTONS RANDOM DISPLAY REPEAT CD OPEN amp PLAY PAUSE gt II ae SKIP SEARCH Haa gt gt STOP m REMOTE CONTROL S BUTTONS RETURN RETURN PBC VIEW RANDOM RANDOM F OSD RESUME L R SLOW GO TO NUMBER BUTTONS 0 9 10 PROG A B REPEAT REPEAT PLAY gt Il ALBUM a 7 ALBUM PI STOP m TITLE ea Hs 41 TITLE gt gt JVC M SRCBX75VWT REMOTE CONTROL THINGS TO KNOW BEFORE PLAYING CDs Playable CDs Only CDs bearing these marks can be used with this system VIDEO CD ReWritable DIGITAL AUDIO On MP3 CD Format e Disc format should be set to ISO 9660 e Multisession recor
17. video images recorded on a VCD Yellow Audio Video cord 402th aM 3 gt aN L 6 ia T Ss to TV gs _ fog ke a Red White CONNECTING HEADPHONES NOT SUPPLIED Connect headphones to the 3 5mm stereo headphone socket at the left side of the unit GENERAL CONTROLS FUNCTION Switch Move the switch to select the system function RADIO TAPE or CD VCD VOLUME Turn the volume knob to increase or decrease the volume level S BASS Turn on S BASS by pressing button down for enhanced bass effect Turn off S BASS up position for normal bass sound POWER OFF standby Move the FUNCTION switch to 0 TAPE position Be sure no cassette buttons are pressed down USING THE RADIO TUNING IN RADIO STATIONS Move the FUNCTION switch to RADIO to turn the radio on e Set BAND to FM SW or MW e Tune in desired station by turning the TUNING dial In SW reception you can finely tune in desired station by turning the FINE TUNE knob on the right side of the unit e To turn off the radio move FUNCTION switch to 0 TAPE HANDLING ANTENNAS FOR BETTER RECEPTION The MW antenna is built in so adjusting the position of the unit may help MW reception The FM SW rod antenna on the back of the unit can be extended and rotated for better FM SW reception USING THE TAPE DECK PAUSE STOP JECT FF REW PL
Download Pdf Manuals
Related Search