Home

JVC HR-XVC39SU User's Manual

Contents

1. Please do not return your product to the retailer Instead please box the product carefully preferably in the original carton and ship insured to the JVC repair replacement facility nearest you SOOO akataka kaka RaRa aata RaRa RaRa Raaka Raakaa RaRa Rakaa RaRa Raana Ra RaRa Raana Rakaa RaRa x A COPY OF YOUR BILL OF SALE A COMPLETED WARRANTY REPAIR REPLACEMENT FORM AND ALL OF THE ORIGINAL ACCESSORIES WHICH CAME WITH YOUR UNIT MUST ACCOMPANY THE PRODUCT TO BE ELIGIBLE FOR REPAIR REPLACEMENT UNDER WARRANTY ve x To obtain the address of the location nearest you please call 800 252 5722 or visit our website http Awww jvc com If you have any questions concerning your JVC Product please contact our Customer Care Center at 800 252 5722 PPP aaka ataata taka bbb bbb bb bbb ob bbb bbb bb bbb bb bbb bb bbb bbb bb bbb bob bbb bob bbb bb bt t FADIA AAA ADA AAD AAA AAS ASSAD ASAD AAS AISA AS ASS AIS SAAS SAAS SAAS SSAA SSAA SSAA SSSA SSAA SSAA ASAI BT 51031 2 0704 US Printed in Indonesia O306MNH SW LG 2006 Victor Company of Japan Limited NS6EQAX YH NE8EOAX GH
2. CPRNM is a copy protection system with scramble system only allowing the recording of copy once broadcast programs CPRM stands for Content Protection for Recordable Media This player is CPRM compatible which means that you can record copy once broadcast programs but you cannot then make a copy of those recordings CPRM recordings can only be made on DVD RW discs formatted in VR mode and CPRM recordings can only be played on players that are specifically compatible with CPRM Maintenance and Service Refer to the information in this chapter before contact ing a service technician Handling the Unit When shipping the unit Please save the original shipping carton and packing materials If you need to ship the unit for maximum protection re pack the unit as it was originally packed at the factory Keeping the exterior surfaces clean e Do not use volatile liquids such as insecticide spray near the unit Do not leave rubber or plastic products in contact with the unit for a long period of time since they leave marks on the surface Cleaning the unit To clean the player use a soft dry cloth If the sur faces are extremely dirty use a soft cloth lightly moist ened with a mild detergent solution Do not use strong solvents such as alcohol benzene or thinner as these might damage the surface of the unit Maintaining the Unit The DVD VCR is a high tech precision device If the optical pick up lens
3. If the tape indicator is blinking no tape is loaded When you are playing DVD at programmed Recording time the DVD VCR automatically change to VCR mode and start recording The DVD VCR will automatically power off when Timer Recording ends Checking or Erasing the Timer Program Programming can be checked whenever the DVD VCR is turned on 1 Press SETUP MENU and the MAIN menu appears 2 Use A Y to choose the PROGRAM menu and press ENTER OK CLOCK PROGRAM TUNING SETUP DU SELECT EMA ENTER TO EXIT PRESS PROGRAM 1 MONTH JULY DAY 1 SUN START STOP 5 00 PM CHANNEL 5 TU SPEED AUTO OO SELECT KA ADJUST TO EXIT PRESS 3 Use lt gt to select a program you want to check or erase To erase the program press CLEAR 0000 4 Press SETUP MENU to return to the TV screen Program Priority If the recording start and end times of preset pro grams overlap on the same day see the example the second program is not recorded until the first is finished 7 00 PM_ 8 00 PM__9 00 PM_10 00 PM I Prog No 1 Prog No 2 g Prog No 3 T These portions will not be recorded In this example the first part of program numbers 2 and 3 are not recorded Instant Timer Recording With this feature you can record for a preset length without using the program timer 1 2 Turn on DVD VCR and the TV Be sure the TV is tuned to the DVD VCR output channe
4. Notes e For 720p and 1080i resolution on the component video out only non copy protected discs can be played back If the disc is copy protected it will be displayed in the 480p resolution without HDMI cable connection With HDMI cable connection the picture may not be displayed properly e If your TV does not support the resolution you have set the picture may not be displayed properly Please read TV s owners manual then set the reso lution that your TV can accept i 2 e i i oe 5 es ou HDMI Connection DVD deck only If you have a HDMI TV or monitor you can connect it to this DVD VCR using a HDMI cable 1 Set the TV s source to HDMI refer to TV s Owner s manual 2 Connect the HDMI OUT jack on the unit to the HDMI jack on a HDMI compatible TV or monitor using an optional HDMI cable H 3 Press OUTPUT STATUS on the front panel repeatedly to select the desired resolution Notes e Both PCM and Bitstream Audio out is available when the sample frequency is set to 48kHz in HDMI connection e If Audio setup is set to bitstream and your TV does not support Bitstream Audio out in HDMI connec tion audio sound may not output or distorted e When the no sound or noisy sound are output with HDMI connection set the Audio option Dolby Digital DTS or MPEG in the SETUP menu to PCM or Off e The arrow on the cable connector body should be face up for correct alignment with the
5. S VIDEO OUT DVD OUT Connect to a S Video Input on TV OPTICAL DIGITAL AUDIO OUT jack DVD OUT Connect to digital optical audio equipment HDMI OUT DVD OUT HDMI output providing a high quality interface for digital audio and video Depending on your TV and other equipment there are various ways you can connect the player Please refer to the manuals of your TV VCR stereo system or other devices as necessary for additional con nection information Notes e The picture and sound of a nearby TV VCR or radio may be distorted during playback Position the units away from each other or turn off the unit after removing the disc e Make sure the DVD VCR is connected directly to the TV and tune the TV to the correct video input channel e Do not connect the DVD VCR s AUDIO OUT jack to the phono in jack record deck of your audio system Do not connect the DVD VCR via another VCR The DVD image could be distorted by the copy protection system oO re S gt ge 2 Connecting an Antenna or Cable TV El Antenna Disconnect the antenna from the rear of the TV and identify the antenna cable If it is a round 75 ohm coaxial cable connect it directly to the jack marked ANT IN on your DVD VCR If your antenna cable is flat connect it to a 300 ohm to 75 ohm antenna adaptor not supplied and slip the adaptor over the ANT IN jack Don t attempt to screw it into to the DVD VCR H Cable TV If your
6. Any of these conditions could result in electric shock or fire Periodically examine the cord of your appliance and if its appearance indicates damage or deterioration unplug it discontinue use of the appliance and have the cord replaced with an exact replacement part by an authorized service personnel Protect the power cord from physical or mechanical abuse such as being twisted kinked pinched closed in a door or walked upon Pay particular attention to plugs wall outlets and the point where the cord exits the appliance To disconnect power from the mains pull out the mains cord plug When installing the product ensure that the plug is easily accessible IMPORTANT SAFETY INSTRUCTIONS PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER S MANUAL AND THOSE MARKED ON THE PRODUCT RETAIN THIS BOOKLET FOR FUTURE REFERENCE This product has been designed and manufactured to assure personal safety Improper use can result in electric shock or fire hazard The safeguards incorporated in this product will protect you if you observe the following procedures for installation use and servicing CAUTION This product does not contain any parts that can be repaired by the user DO NOT REMOVE THE CABINET COVER OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY Read these instructions All these safety and operat ing instructions should be read before the product i
7. TV tuner DISPLAY Accesses On Screen Display Switches between the clock tape counter and tape remaining modes on the display CH Selects VCR channels Adjusts manually the tape s picture onscreen lt aPav Selects menu options SETUP MENU Accesses or removes DVD Setup menu and VCR menu PAUSE II Pause playback or recording temporarily Press repeat edly for frame by frame playback SKIP 4 lt PPI Go to next chapter or track Returns to beginning of cur rent chapter or track or go to previous chapter or track gt x N x E g e REW lt lt FF gt gt DVD Search backward or forward VCR Rewinds Advances the tape during the STOP mode for fast backward forward picture search 0 9 Selects numbered options in a menu SUBTITLE Selects a subtitle language A MONITOR Selects an audio language DVD or an audio channel VCD MARKER Marks any point during playback SEARCH Displays Marker Search menu REPEAT Repeat chapter track title or all RANDOM Plays tracks in random order Ma Fast forwards picture search through 30 seconds of recording OPEN CLOSE 4 Opens and closes the disc tray EJECT 4 Ejects the tape in the VCR deck VCR Select the DVD VCR function mode to VCR AUX Selects the VCR deck s source Tuner LINE 1 or LINE 2 DISC MENU Accesses menu on a DVD disc ENTER OK Confirms menu selections Displays functions on the TV
8. Video tape cannot be e Is the cassette compartment empty Eject the tape in inserted No Hi Fi sound e Audio mode is not set properly e Select STEREO by repeatedly pressing A MONITOR on the remote control The remote control does There is an obstacle in the path of not work properly the remote control and this unit e The batteries in the remote control e Replace the batteries with new ones are exhausted Remove the obstacle e The remote control is not pointed at Point the remote control at the the remote sensor of the DVD VCR remote sensor of the DVD VCR e The remote control is too far from the Operate the remote control within DVD VCR 23 ft 7m e This remote control use the same e When using a VCR first press the buttons for VCR and DVD functions VCR button When using a DVD first ex PLAY press the DVD button Camcorder image is not Camcorder is off e Turn camcorder on and operate shown properly Camcorder image via AV DVD VCR SOURCE SELECT is not Press AUX to select LINE input input to DVD VCR is not set to LINE1 or LINE2 channel LINE1 or LINE2 shown on TV screen Timer recording is not e Clock in DVD VCR is not set to cor possible rect time Set clock to correct time e Timer has been programmed incor Reprogram Timer rectly e indicator light does not appear e Reprogram Timer and turn after programming timer DVD VCR off to enable timer 8 c 5
9. 25 General Operation 04 14 CLOCK secto trena hy von Saba es wed 14 Operations DVD 26 30 e Auto Clock Set 2 00005 14 e Manual Clock Set o oo cee 14 Playback Setup 0e eee eee eee 26 PROGRAM ccc eee ee 14 General Features 0 000005 26 27 TUNING 0c cece cece eben bnbnas 15 Additional Features 27 28 e Auto Channel Programming 15 Playing an Audio CD 000e sees 28 e To Add or Erase Channels 15 Programmed Playback 00005 28 SETUP 11 eee eee t eet eens 15 Viewing a JPEG File 2 2 5 29 e FUNCTION OSD 555 15 Playing a DVD VR Format Disc 30 E TYPE Ree E a See 13 Maintenance and Service 30 STEREO SAP MONO 15 e AUDIO OUTPUT Reference 00e0eeeenuee 31 35 STEREO LEFT RIGHT 15 Displaying Disc Information on screen 16 Language Codes List 0s sees sees eens 31 Initial Settings DVD 16 18 ATEA icc ig ar e a Troubleshooting 0eeeeeeee 32 33 General Operation 16 Leen WANGUAGE ac ieee et tice oi 17 Specifications 00200 eee eens 34 DISPLAY noe eee artnet ee ceteris 17 Warranty Only in U S A u aneneen 35 AUDIO 2 Pecceiee aiet ite Seas isa 17 OTHERS ei 00 Seve See Pee ee 18 Remote Control Function 18 Introductio
10. CH 5 If you are recording from another source via audio video input jacks at the rear or front panel select LINE1 or LINE2 using AUX 6 Set the desired recording speed SP or SLP by pressing SPEED This DVD VCR is not designed to record in LP mode 7 Set the MTS mode STEREO or SAP Set the BROADCAST TYPE option to SAP if applicable 8 Press REC and recording starts The REC indicator appears in the display window If a cas sette with no safety tab is loaded the cassette is ejected 9 Press STOP W to stop recording If the tape reaches the end before STOP W is pressed the DVD VCR stops rewinds and ejects the tape Tip Use PAUSE IH for best results when making changes while recording For example if you want to change channels while recording first press PAUSE IE to put the unit in pause mode select the desired channel on the DVD VCR and then press PAUSE II again to resume recording Note During the VCR recording mode you cannot change to the DVD mode To pause the recording 1 Press PAUSE I to pause the tape during record ing The REC indicator flashes in the display win dow 2 When you want to continue recording press PAUSE Ill or press REC After 5 minutes in PAUSE mode the DVD VCR stops automatically to protect the tape and the video heads To record one TV program while watching another 1 Press TV VCR to select the TV mode during recording The TV in
11. CN India IN Norway NO Taiwan TW Colombia CO Indonesia ID Oman OM Thailand TH Congo CG Israel IL Pakistan PK Turkey TR Costa Rica CR Italy IT Panama PA Uganda UG Croatia HR Jamaica JM Paraguay PY Ukraine UA Czech Republic CZ Japan JP Philippines PH United States US Denmark DK Kenya KE Poland PL Uruguay UY Ecuador EC Kuwait KW Portugal PT Uzbekistan UZ Egypt EG Libya LY Romania RO Vietnam VN El Salvador SV Luxembourg LU Russian Federation RU Zimbabwe ZW 8 c ES ce y oc Troubleshooting Check the following guide for the possible cause of a problem before contacting service Symptom Cause Correction No power e The power cord is disconnected e Plug the power cord into the wall outlet securely Abnormal or no picture e The TV is not set to receive e Insert a disc or tape Check that the DVD VCR signal output disc or tape indicator in the display window is lit e The video cable is not connected Select the appropriate video input securely mode on the TV so the picture from the DVD VCR player appears on the TV screen e The HDMI mode is on e Set HDMI on the front panel to OFF e Unit output setting and TV resolution Check TV capability capabilities mismatch e Check mode of connections e g S Video Components etc e Check unit Resolution setting according to TV capability and mode of connection e Wrong cable connection e Check the connection Distorted or no sound e The equipment con
12. ES cD y oc Specifications General Power requirements Power consumption Dimensions approx Weight approx Operating temperature Operating humidity Signal system Inputs ANTENNA IN VHS VIDEO IN LINE1 2 VHS AUDIO IN LINE1 2 Outputs VIDEO OUT S VIDEO OUT COMPONENT VIDEO OUT PROGRESSIVE SCAN HDMI OUT Audio output digital audio Audio output analog audio RF OUT VCR Specifications Head system Timer Tape speed Tape width Maximum recording time Rewind time Channel coverage Frequency range Signal to noise ratio Dynamic range Channel separation DVD Specifications Laser system Frequency response Signal to noise ratio Harmonic distortion Dynamic range Accessories 120 V 60 Hz 18 W 16 9 X 3 1 X 10 4 430 X 78 5 X 265 mm w x h x d 9 26 Ibs 4 2 kg 5 C to 40 C 41 F to 104 F 5 to 90 NTSC 75 ohms VHF UHF CATV 1 V p p 75 ohms sync negative RCA jack x 2 6 0 dBm more than 47 ohms RCA jack L R x 2 1 V p p 75 ohms sync negative Y 1 0 V p p 75 ohms negative sync Mini DIN 4 pin x 1 C 0 286 V p p 75 ohms Y 1 0 V p p 75 ohms negative sync RCA jack x 1 Pb Pr 0 7 V p p 75 ohms RCA jack x 2 19 pin x 1 Corresponding to HDCP Video 480p 720p 1 080i Audio 2 ch PCM Bitstream 0 5 V p p 75 ohms RCA jack x 1 OPTICAL x 1 2 0 Vrms 1 KHz 0 dB 600 ohms RCA jack L R x 1 Channel 3 or 4 Adjustable Four he
13. Tigrinya 8473 Bulgarian 6671 Indonesian 7378 Pashto Pushto 8083 Tonga 8479 Burmese 7789 Interlingua 7365 Persian 7065 Turkish 8482 Byelorussian 6669 Irish 7165 Polish 8076 Turkmen 8475 Cambodian 7577 Italian 7384 Portuguese 8084 Twi 8487 Catalan 6765 Japanese 7465 Quechua 8185 Ukrainian 8575 Chinese 9072 Javanese 7487 Rhaeto Romance 8277 Urdu 8582 Corsican 6779 Kannada 7578 Rumanian 8279 Uzbek 8590 Croatian 7282 Kashmiri 7583 Russian 8285 Vietnamese 8673 Czech 6783 Kazakh 7575 Samoan 8377 Volap k 8679 Danish 6865 Kirghiz 7589 Sanskrit 8365 Welsh 6789 Dutch 7876 Korean 7579 Scots Gaelic 7168 Wolof 8779 English 6978 Kurdish 7585 Serbian 8382 Xhosa 8872 Esperanto 6979 Laothian 7679 Serbo Croatian 8372 Yiddish 7473 Estonian 6984 Latin 7665 Shona 8378 Yoruba 8979 Faroese 7079 Latvian Lettish 7686 Sindhi 8368 Zulu 9085 Area Codes List Choose an area code from this list Area Code Area Code Area Code Area Code Afghanistan AF Ethiopia ET Malaysia MY Saudi Arabia SA Argentina AR Fiji FJ Maldives MV Senegal SN Australia AU Finland FI Mexico MX Singapore SG Austria AT France FR Monaco MC Slovak Republic SK Belgium BE Germany DE Mongolia MN Slovenia SI Bhutan BT Great Britain GB Morocco MA South Africa ZA Bolivia BO Greece GR Nepal NP South Korea KR Brazil BR Greenland GL Netherlands NL Spain ES Cambodia KH Islands HM Netherlands Antilles AN Sri Lanka LK Canada CA Hong Kong HK New Zealand NZ Sweden SE Chile CL Hungary HU Nigeria NG Switzerland CH China
14. a folder and press ENTER Note OK A list of files in the folder appears When the resolution is set to 720p or 1080i this func If you are in a file list and want to return to the tion is not available previous Folder list use the A V buttons on the i remote to highlight 1 and press ENTER OK To rotate picture 3 If you want to view a particular file press A V Press A during showing a picture to rotate the pic to highlight a file and press ENTER OK or PLAY ture clockwise or counter clockwise The selected file will appear for viewing While viewing a file you can press STOP W to move to the previous menu PHOTO menu JPEG disc compatibility with this player is limited as follows Tips e Depending upon the size and number of JPEG c e Information and user guidance regarding the current files it could take a long time for the DVD VCR 2 image is displayed in the lower part of the screen to read the disc s contents If you don t see an You can toggle this bar on and off using RETURN on screen display after several minutes some 0 of the files may be too large reduce the 6 e There are three Slide Speed options resolution of the JPEG files to less than 5760 gt gt gt Fast gt gt Normal and gt Slow Horizontal x 3840 Vertical pixels and burn Use AV lt P to highlight the Speed Then use lt gt another disc to select the option you want to use then press The total number of files in a fo
15. and disc drive parts are dirty or worn the picture quality could be diminished Depending on the operating environment regular inspection and maintenance are recommended after every 1 000 hours of use For details please contact your nearest authorized service center Reference Language Codes List Use this list to input your desired language for the following initial settings Disc Audio Disc Subtitle Disc Menu Language Code Language Code Language Code Language Code Abkhazian 6566 Fiji 7074 Lingala 7678 Singhalese 8373 Afar 6565 Finnish 7073 Lithuanian 7684 Slovak 8375 Afrikaans 6570 French 7082 Macedonian 7775 Slovenian 8376 Albanian 8381 Frisian 7089 Malagasy 7771 Somali 8379 Ameharic 6577 Galician 7176 Malay 7783 Spanish 6983 Arabic 6582 Georgian 7565 Malayalam 7776 Sudanese 8385 Armenian 7289 German 6869 Maltese 7784 Swahili 8387 Assamese 6583 Greek 6976 Maori 7773 Swedish 8386 Aymara 6588 Greenlandic 7576 Marathi 7782 Tagalog 8476 Azerbaijani 6590 Guarani 7178 Moldavian 7779 Tajik 8471 Bashkir 6665 Gujarati 7185 Mongolian 7778 Tamil 8465 Basque 6985 Hausa 7265 Nauru 7865 Tatar 8484 Bengali Bangla 6678 Hebrew 7387 Nepali 7869 Telugu 8469 Bhutani 6890 Hindi 7273 Norwegian 7879 Thai 8472 Bihari 6672 Hungarian 7285 Oriya 7982 Tibetan 6679 Breton 6682 Icelandic 7383 Panjabi 8065
16. cable connection has no converter or descrambler unscrew the cable from your TV and attach it to the ANT IN jack on the DVD VCR If a converter is required connect a coaxial cable from the wall jack to the IN connector on the converter and a coaxial cable from the OUT connector on the con verter to the ANT IN on your DVD VCR This cable hookup permits both TV and DVD VCR operation 1 Antenna Antenna Flat a 300 ohm 300 75 ohm Adaptor lo OR OF Not supplied Cable TV Wall Jack ONPONENT DVD VCR AOGAESSIVE SO OUT PROGRESSIVE sca ae fe VIDEO VIDEO DVD EXCLUSIVE OUT 2 Rear of DVD VCR of DVD VCR caue lt DO OG Cable TV Back Panel of War saca Typical Cable Box To view or record a CATV channel 1 Tune the TV to the DVD VCR output channel CH 3 or 4 2 Set the DVD VCR channel selector to the cable output channel Example CH3 3 Select a channel using the cable converter Notes e With this connection you cannot record one pro gram while viewing another e If you are using a cable box to tune channels it is not necessary to do Auto Channel Set Basic TV Connections Make one of the following connections depending on the capabilities of your TV RF coaxial connection Connect the RF OUT jack on the DVD VCR to the antenna in jack on the TV using the supplied 75 ohm Coaxial Cable R How to set the DVD VCR s RF output channel 1 W
17. screen RETURN 0 Removes the setup menu Displays the menu of a video CD with PBC STOP W Stops playback or recording PLAY gt Starts playback PROGRAM Places a track on the program list CLEAR 0000 Removes a mark on the Marker Search menu ANGLE Selects a DVD camera angle if available ZOOM Enlarges DVD video image REC e Starts recording Press repeatedly to set the recording time TITLE Displays the disc s Title menu if available REPEAT A B Repeats sequence between two points A and B SPEED Selects recording speed Rear Panel A Caution Do not touch the inner pins of the jacks on the rear panel Electrostatic discharge may cause perma nent damage to the unit E ANT IN Connect the VHF UHF CATV antenna to this terminal H VCR IN LINE 1 VIDEO AUDIO Left Right Connect the audio video output of an external source Audio system TV Monitor VCR Camcorder E DVD VCR OUT VIDEO AUDIO Left Right Connect to a TV with video and audio inputs E COMPONENT PROGRESSIVE SCAN VIDEO OUT Y Pb Pr DVD OUT Connect to a TV with Y Pb Pr inputs E AUDIO OUT Left Right DVD OUT Connect to a TV or other equipment with audio inputs TAC Power Cord Plug into the power source RF OUT Connect to a TV with RF coaxial inputs Preparation HDMI OUT ES COAXIAL DIGITAL AUDIO OUT jack DVD OUT Connect to digital coaxial audio equipment
18. tions The tuner and VCR will still be heard through the RF OUT R or DVD VCR AUDIO OUT A1 jack See page 11 Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic II Pro Logic Connect the Left and Right AUDIO OUT or DVD VCR AUDIO OUT jacks on the DVD VCR to the audio left and right in jacks on your amplifier receiv er or stereo system using optional audio cables A1 A2 Connecting to an amplifier equipped with two channel digital stereo PCM or to an Audio Video receiver equipped with a multi channel decoder Dolby Digital MPEG 2 or DTS 1 Connect one of the DVD VCR s DIGITAL AUDIO OUT jacks OPTICAL O COAXIAL X to the corresponding in jack on your amplifier Use an optional digital OPTICAL O COAXIAL X audio cable 2 You will need to activate the DVD VCR s digital output See AUDIO on page 17 Digital Multi channel sound A digital multi channel connection provides the best sound quality For this you need a multi chan nel Audio Video receiver that supports one or more of the audio formats supported by your DVD VCR MPEG 2 Dolby Digital and DTS Check the receiv er manual and the logos on the front of the receiver Caution Due to the DTS Licensing agreement the digital output will be in DTS digital out when DTS audio stream is selected Notes e If the audio format of the digital output does not match the capabilities of your receiver the rec
19. to protect it from over heating The openings should never be blocked by placing the product on a bed sofa rug or other similar surface This product should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided or the manu facturer s instructions have been adhered to Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet con sult an electrician for replacement of the obsolete outlet Servicing is required when the product has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the product the product has been exposed to rain or moisture does not operate nor mally or has been dropped Contents Introduction s4 o stn bs Sad eee Bees 5 9 Operations VCR 19 25 Moisture Condensation 5 VCR Tape Playback 0 0 0005 19 20 Symbol Used in this Manual 5 Basic Instructions 24 19 About the Symbol Display 5 Auto Tracking 0
20. 0000 eens 19 Notes on Discs cccecececcecucee 5 Manual Tracking 0 e eee 19 SEACH 2220 55 ynwice ee cutee itd estat ds 19 ae Me emoe Rone oe poe ae ae Still Picture and Frame by Frame Playback 19 ypes of Playable DISCS ioe ciediec aie ernis 6 Slow Motion 0 00000 cece eee 20 Regional Code ssc oko eee ts 6 CM SKIP Commercial Skip Ms 5 Doo ted 20 Selecting the Viewing Source 6 VHS Hi Fi Stereo MTS Broadcast 20 Front Panel 0 0c cece cence eee 7 Hi Fi Stereo Audio Sound 20 Remote Control 0c cece 8 MTS Multi Channel TV Sound 20 Rear Panel 0ssscbieese eee s ee ee creas 9 VCR Tape Recording 21 24 Basic Instructions 45 21 Preparation 00200005 9 18 Timer Recording 21 22 Instant Timer Recording 23 Connecting an Antenna or Cable TV 10 Recording from External Components 23 Basic TV Connections 10 11 Copying from DVD to VCR 24 Optional TV Connections 11 On Screen Display VCR 5 24 Resolution Setting 020ee0e 11 Additional VCR Information 25 HDMI Connection DVD deck only 12 VCR Auto Play System 25 Connection to an Amplifier 13 S VHS Quasi Playback SQPB 25 Initial Settings VCR 00005 14 15 SA enni
21. DOM During playback or in stop mode press RANDOM for ran dom playback TITLE If the current DVD title has a menu the title menu appears on the screen Otherwise the disc menu may appear DISC MENU The disc menu appears on the screen eon ANGLE During playback of DVD disc contains scenes recorded dif DVD ferent camera angles press ANGLE repeatedly to select a desired angle Tip The Camera Angle icon is displayed on the TV screen when alternate angles are available SUBTITLE During playback press SUBTITLE repeatedly to select a DVD desired subtitle language O AUDIO During playback press A MONITOR repeatedly to hear a different audio language or audio track o was Time Search T Additional features Soa l l S To start playing at any chosen time on the disc 2i 3D Surround 1 Press DISPLAY during playback re To produce a 3D surround elect that simulates mal 2 Press A to select the time clock icon and tichannel audio from two stereo speakers instead of ioc annga ts the five speakers normally required for multi channel Fai PP aie NEE audio from a home theater system 3 Input the required start time in hours minutes and seconds from left to right If you enter the wrong numbers press CLEAR 0000 to remove the numbers you entered Then input the correct 1 Press DISPLAY during playback numbers 2 Use Aor to select the sound option 4 Press ENTER OK to confirm Playback starts from The sound optio
22. DVD VCR to the S Video in jack on the TV using the optional S Video cable S Note For S Video connection resolution must be set to 480i or 480p however S VIDEO OUT is always at 480i standard resolution Component Video Progressive Scan connection If your television is a high definition or digital ready television you may take advantage of the DVD VCR s progressive scan output for the highest video resolution possible Connect the COMPONENT PROGRESSIVE SCAN VIDEO OUT jacks on the DVD VCR to the corre sponding in jacks on the TV using an optional Y Pb Pr cable C Notes e The 480p and 720p resolutions are Progressive scan applied resolutions e Progressive scan does not work with the analog video connections yellow VIDEO OUT jack and S VIDEO OUT jack Resolution Setting The resolution setting support only DVD playback 1 Before you set the resolution this unit must be in stop mode Press STOP W to stop playback 2 Press OUTPUT STATUS on the front panel once The current resolution setting will be appears in the display window 3 Press OUTPUT STATUS repeatedly to change the resolution you want The available resolution according to the connections are as shown below OUTPUT Available CONNECTIONS Resolutions 1920 x 1080i eu 1280 x 720 VIDEO OUT E 720 x 480p 1920 x 1080i COMPONENT 1280 x 720p VIDEO OUT 720 x 480p 720 x 480i VIDEO OUT 720 x 480i S VIDEO 720 x 480i
23. JUST TO EXIT PRESS The other options are LEFT POSITION which results in the left channel sound L being heard from both speakers or RIGHT POSITION which results in the right channel sound R being heard from both speakers 3 Insert a cassette and press PLAY B MTS Multi Channel TV Sound This DVD VCR can decode MTS stereo and bilingual SAP off the air broadcast sound signals It also decodes stereo TV sound from local cable companies as long as they operate on assigned cable frequen cies and use the ElA recommended MTS stereo bilin gual TV sound system Multichannel TV Sound Indicator MTS When you press ENTER OK one or both of the indi cators appears on the TV Screen STEREO The DVD VCR can record in stereo onto the VHS Hi Fi audio tracks when the BROADCAST TYPE option is in the STEREO position The DVD VCR can also record mono audio onto the mono audio track SAP Some stations transmit a Second Audio Program which is used for a second language or additional information STEREO SAP Use the BROADCAST TYPE option to select the desired recording mode STEREO or SAP VCR Tape Recording Basic Instructions 1 Turn on the DVD VCR and TV 2 Tune the TV to the DVD VCR output channel CH 3 or 4 or if a direct VIDEO AUDIO connection is made between the DVD VCR and the TV set the TV s source selector to VIDEO 3 Insert a video cassette with the safety tab intact 4 Select the desired channel using
24. JVC MM DVD PLAYER amp VIDEO CASSETTE RECORDER HR XVC38BU HR XVC39SU HIGH DEFINITION MULTIMEDIA INTERFACE j a SQPB For Customer Use Enter below the Model No and Serial No which are located on the rear of cabinet Retain this INS TRUC TIONS information for future reference Model No LPT1128 001A CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral trian gle is intended to alert the user to the presence of important operating and maintenance servic ing instructions in the literature accompanying the product WARNING TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE CAUTION Do not block any ventilation openings Install in accordance with the manufacturer s instructions Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to pro tect it fr
25. T 210 etc Notes e The function displays can be seen displayed on the TV screen for 5 seconds e The clock or tape counter tape remaining mode will be displayed until you press ENTER OK e The tape counter and the remaining tape length indicator appear only when a cassette is inserted Also the remaining tape length indicator appears after any tape operation Additional VCR Information e During manual recording timer recording Instant Timer Recording playback or fast forward modes the DVD VCR automatically starts rewinding the tape at the end of the tape The cassette stops at the beginning of the tape and is ejected e After you have finished using the DVD VCR rewind eject and remove the cassette Place the cassette in its protective sleeve to protect it from dust It is not necessary to rewind the cassette before removing it but if you do it is ready to play or record the next time you use it Be sure the DVD VCR channel selector is on the correct channel you wish to record The channel that is being recorded can always be checked by setting the television on the DVD VCR channel CH 3 or 4 and pressing the TV VCR to turn the DVD VCR s TV indicator off Do not attempt to hook up more than one television set to the DVD VCR for either recording or play back VCR Auto Play System This DVD VCR features automatic playback When you load a tape with the safety tab removed the following occurs e T
26. TV 2 Tune the TV to the DVD VCR output channel CH 3 or 4 or if a direct VIDEO AUDIO connection is made between the DVD VCR and the TV set the TV s source selector to VIDEO 3 Insert a pre recorded video cassette The O O indicator lights and the DVD VCR pow ers on automatically 4 If the TIMER indicator in the display window is lit press POWER O I once 5 If a tape without a safety tab is inserted the unit starts playback automatically If not press PLAY B 6 Press STOP W to stop playback If the tape reaches the end before you press STOP W the DVD VCR automatically stops rewinds and ejects the tape Note It is not necessary to select the tape speed for play back because it is automatically selected by the DVD VCR Also during playback the TV VCR selector switches to VCR mode automatically Auto Tracking Automatic tracking adjusts the picture to remove snow or streaks and beings when e A tape is played for the first time e The tape speed SP LP SLP changes e Streaks or snow appear due to scratches on the tape Manual Tracking To manually adjust the tracking use the CH but tons during playback Notes e Vertical jitter requires a very fine adjustment e Tracking is automatically reset to normal when the tape is ejected or the power cord is unplugged for more than 3 seconds Search This function lets you visually search for a tape sec tion in either direction forw
27. Track repeats the current track e All repeats all the tracks on programmed list e Off No display does not play repeatedly Note If you press SKIP BPI once during Repeat Track playback the repeat playback cancels Erasing a Track from Program List 1 During STOP mode press PROGRAM and the mark will appear 2 Use AV lt P gt to select the track that you wish to erase from the Program list 3 Press CLEAR 0000 Repeat step 1 3 to erase additional tracks on the list Erasing the Complete Program List 1 During STOP mode press PROGRAM and the mark will appear 2 Use AV lt gt to select Clear All then press ENTER OK Note The programs are also cleared when the power is off or the disc is removed Viewing a JPEG File Slide Show f Use AV lt P to highlight the IE Slide Show then Using this DVD VCR you can view discs with JPEG press ENTER OK files 1 Insert a disc and close the tray The PHOTO menu Still Picture appears on the TV screen 1 Press PAUSE Il during slide show The player will now go into PAUSE mode KREI 2 To return to the slide show press PLAY B or wet Cl preview press PAUSE II again e 3 ui Moving to another File e g Press SKIP PPI or 4 or cursor lt or gt once FOLDER 04 while viewing a picture to advance to the next or previous file 525x515 Zoom FILE 04 Use zoom to enlarge the photo image See page 27 2 Press A to select
28. Y mode to protect the tape and video heads CM SKIP Commercial Skip This feature is useful for skipping commercials or short program segments 1 Press s s in playback mode The DVD VCR performs a fast forward picture search through 30 seconds of recording 2 Press x again to extend the search time by an addition 30 seconds The maximum search time is 3 minutes 3 When the search is complete the DVD VCR goes into playback mode automatically VHS Hi Fi Stereo MTS Broadcast This DVD VCR is equipped with the VHS Hi Fi audio sound system for recording and playback The infor mation below gives a brief description of Hi Fi audio and how to record and play a tape in the Hi Fi audio mode Hi Fi Stereo Audio Sound A stereo TV with AUDIO VIDEO input jacks or a ste reo audio system is required for true stereo playback To experience the full and rich stereo sound available with Hi Fi recorded tapes we recommend the con nection of this unit to a home stereo audio system 1 Set the AUDIO MODE option to HI FI on the VCR SETUP menu FUNCTION OSD ON AUDIO MODE HI FI BROADCAST TYPE STEREO AUDIO OUTPUT STEREO SELECT KD ADJUST TO EXIT PRESS 2 Set the AUDIO OUTPUT option to STEREO so that the left channel sound L is heard from the left speaker and the right channel sound R is heard from the right speaker FUNCTION OSD ON AUDIO MODE HESFI BROADCAST TYPE STEREO AUDIO OUTPUT STEREO BO SELECT KD AD
29. ad helical scan azimuth system 12 hour display type with AM PM SP 33 35 mm sec LP 16 67 mm sec SLP 11 12 mm sec 12 7 mm SP 2 HOURS T 120 SLP 6 HOURS T 120 8 HOURS T 160 About 3 minutes T 120 VHF 2 13 UHF 14 69 CATV 1 125 4A A W W 1 W 84 A 5 A 1 20 Hz to 20 kHz More than 43 dB More than 88 dB More than 60 dB Semiconductor laser wavelength 650 nm DVD PCM 96 kHz 8 Hz to 44 kHz DVD PCM 48 kHz 8 Hz to 22 kHz CD 8 Hz to 20 kHz More than 100 dB ANALOG OUT jacks only Less than 0 008 More than 95 dB DVD CD RF 75 ohm Coaxial Cable x 1 Remote control x 1 Batteries RO3 AAA x 2 e Design and specifications are subject to change without prior notice Warranty Only in U S A e he de de he de d d d h d d h e d d de d de d d de d d de d d de de de d h de d d e d de d de de de h e d de de he de de de de de d de de de d d de de d de d d d d d k k k k kk JVE LIMITED WARRANTY VCR EXCHANGE 90 JVC COMPANY OF AMERICA warrants this Video Cassette Recorder and all parts thereof except as set forth below ONLY TO THE ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date of the original retail purchase for the period shown below The Warranty Period LABOR 90 DAYS PARTS 90DAYS THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY 50 UNITED STATES THE DISTRICT OF COLUMBIA AND IN THE COMMONWEALTH OF PUERTO RICO WHAT WE WILL DO If this product is f
30. ard and reverse During the high speed picture search modes the audio is muted and horizontal lines noise bars appear Also a short time is needed to stabilize the tape speed when re entering the PLAY mode so slight interference may be observed during this time To search 1 Press REW lt lt or FF gt gt during playback 2 To return to playback press PLAY B Note After 3 minutes in SEARCH mode the DVD VCR returns to PLAY mode to protect the tape and video heads Still Picture and Frame by Frame Playback 1 Press PAUSE IE during playback A still picture appears on the TV screen and the audio is muted 2 If the still picture vibrates vertically stabilize it by using CH on the remote control 3 Press PAUSE Ill repeatedly to advance the video picture one frame at a time 4 To return to playback press PLAY B gt Note After 5 minutes in STILL mode the DVD VCR stops to protect the tape and video heads 9 g Q Oo Slow Motion 1 While in still mode press FF gt The tape is played at a speed 1 19 times slower than the nor mal speed 2 Use CH on the Remote Control if necessary to adjust the tracking 3 To return to the normal speed press PLAY B gt Notes e During slow motion audio is muted and horizontal lines noise bars may appear on the TV screen This is normal e After 3 minutes in SLOW MOTION mode the DVD VCR goes back to PLA
31. ayed on the unit e Only plays if DVD RW is recorded in Video mode and has been finalized e Do not use irregularly shaped CDs e g heart shaped or octagonal since they may result in mal functions e This DVD VCR requires discs and recordings to meet certain technical standards in order to achieve optimal playback quality Pre recorded DVDs are automatically set to these standards There are many different types of recordable disc formats and these require certain pre existing conditions see above to ensure compatible playback Regional Code This unit has a regional code printed on the rear of the unit This unit can play only DVD discs labeled same as the rear of the unit or ALL Notes on Regional Codes e Most DVD discs have a globe with one or more numbers in it clearly visible on the cover This num ber must match your DVD VCR s regional code or the disc cannot play e If you try to play a DVD with a different region code from your player the message Check Regional Code appears on the TV screen Notes on Copyrights It is forbidden by law to copy broadcast show broad cast via cable play in public or rent copyrighted material without permission This product features the copy protection function developed by Macrovision Copy protection signals are recorded on some discs When recording and playing the pictures of these discs picture noise will appear This product incorporates copyright prote
32. c tion technology that is protected by method claims of certain U S patents and other intellectual property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection technol ogy must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation Reverse engineering or disassembly is prohibited Notice for Progressive Scan Use CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE IN CASE OF 525 PROGRESSIVE SCAN PICTURE PROBLEMS IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE STANDARD DEFINITION OUTPUT IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p DVD VCR PLEASE CONTACT OUR CUSTOMER SERVICE CENTER Selecting the Viewing Source You must select one of your output sources DVD or VCR to view on the TV screen e If you want to view DVD deck output source e Press DVD until DVD indicator in the display window lights and output source of DVD deck is viewed on the TV screen e If you want to view VCR deck output source e Press VCR until VCR indicator in the display window lights and output source of VCR deck is viewed on the TV screen Notes e If you insert a disc while the DVD VCR is in the VCR mode the DVD VCR will switch to DVD m
33. c tray 2 Insert a blank VHS video tape into the VCR deck 3 Find the place on the DVD from which you want to start dubbing using the PLAY FF REW and PAUSE functions For best results pause playback at the point from which you want to record 4 Press REC The DVD goes into PLAY mode and the VCR goes into RECORD mode If the DVD disc menu appears you may need to press PLAY manually to begin copying 5 When the DVD is finished playing press STOP Wi to end copying Notes e If you use the DISPLAY or ZOOM function during copying the information displayed on screen will be recorded e If the DVD you are attempting to copy is copy pro tected you will not be able to copy the disc It is not permitted to copy Macrovision encoded DVDs or Discs Lock is displayed in the display window e You must stop the copy process manually when the DVD movie ends or the unit may replay and record over and over again e When you stop the DVD playback during copying the recording on VCR is stopped automatically On Screen Display VCR Some of these functions will be displayed every time the DVD VCR is operated o e 8 PLAY HI FI CH 4 SP STEREO OCT 8 SAT 2 15 PM I I o TAPE SPEED DISPLAY FUNCTION DISPLAY HI FI DISPLAY CHANNEL DISPLAY STEREO SAP DISPLAY MONO is not displayed DATE DISPLAY CLOCK COUNT REMAIN DISPLAY Each press of the ENTER OK changes th
34. connected Display Mode Display Mode setting works only when the TV Aspect mode is set to 4 3 Letterbox Displays a wide picture with bands on the upper and lower portions of the screen Panscan Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit AUDIO Each DVD disc has a variety of audio output options Set this units AUDIO options according to the type of audio system you use AUDIO Dolby Digital DTS gt Bitstream MPEG PCM Sample Freq 48kHz gt Bitstream DRC gt On Vocal gt On Move gt Select Dolby Digital DTS MPEG Bitstream Select Bitstream if you connect the DVD VCR s DIGITAL AUDIO OUT jack to an amplifier or other equipment with a Dolby Digital DTS or MPEG decoder PCM for Dolby Digital MPEG Select when con nected to a two channel digital stereo amplifier DVDs encoded in Dolby Digital or MPEG will be automatically downmixed to two channel PCM audio Off for DTS If you select Off the DTS signal is not output through the DIGITAL AUDIO OUT jack Sample Freq Frequency If your receiver or amplifier is NOT capable of han dling 96 kHz signals select 48 kHz When this choice is made this unit automatically converts any 96 kHz signals to 48 kHz so your system can decode them If your receiver or amplifier is capable of handling 96 kHz signals select 96 KHz When this choice is made this unit pas
35. connector on the DVD VCR e If there is noise or lines on the screen please check the HDMI cable e Not all HDCP compatible DVI devices will work with this unit e If your HDMI TV does not support HDCP the blue screen appears on the screen Tip When you use HDMI connection you can change the resolution 480p 720p 1080i for the HDMI output HDMI compatible TV O Tool o 7l l lol Rear of DVD VCR About HDMI HDMI High Definition Multimedia Interface supports both video and audio on a single digital connection for use with DVD players Set Top boxes and other AV devices HDMI was developed to provide the technologies of HDCP High bandwidth Digital Content Protection HDCP is used to protect digital content transmitted and received HDMI has the capability to support standard enhanced or high definition video plus standard to multi channel surround sound audio HDMI features include uncompressed digital video a bandwidth of up to 5 gigabytes per second one connector instead of several cables and connectors and communica tion between the AV source and AV devices such as DTVs HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC Connection to an Amplifier You can only listen to DVD playback using OPTICAL O COAXIAL X and AUDIO OUT A2 connec
36. dicator appears 2 Using the TV select the channel to be viewed Timer Recording For unattended recording you must input the channels to be recorded and the starting and ending times Things to know before starting If you try to set the program timer before setting the clock PLEASE SET THE CLOCK appears for a moment and then CLOCK menu appears on the TV screen Set the time and date before proceeding 1 Turn on the DVD VCR and the TV 2 Be sure the TV is set to the DVD VCR output channel 3 or 4 3 Make sure the TUNING BAND in the TUNING menu is set appropriately TV or CATV 4 Press SETUP MENU and the MAIN menu appears 5 Use A to choose the PROGRAM menu and press ENTER OK CLOCK PROGRAM DAE ak CHANNEL gale Arean OO SELECT KA ADJUST TO EXIT PRESS DU SELECT EMA ENTER TO EXIT PRESS MEM If eight programs are already entered the FULLY PROGRAMMED message appears for a moment and then PROGRAM 1 appears on the TV screen 6 Use the A Y buttons to switch between the program options and the lt 4 gt buttons to input the program information Input the month day start and stop times of the program you want to record c 2 p ih O 2 e CHANNEL Select a TV channel LINE1 or LINE2 If you have CABLE TV and use a cable box converter you must set the channel to match the cable box output channel usually CH 3 or 4 Change channels on the cable box instead of
37. e 5 es ou Displaying Disc Information on screen DVD You can display various information about the disc loaded on screen 1 Press DISPLAY to show various playback infor mation The items displayed differ depending on the disc type or playing status Ea EX 1 12 1 3 gt O 0 20 09 1 ENG GO sete E 1 ENG ek 1 1 A 3DSUR 2 You can select an item by pressing A and change or select the setting by pressing lt gt e Title Track Current title or track number total number of titles or tracks e Chapter Current chapter number total number of chapters Time Elapsed playing time Audio Selected audio language or channel Subtitle Selected subtitle Angle Selected angle total number of angles Sound Selected sound mode Note If no button is pressed for a few seconds the on screen display disappears Initial Settings DVD By using the DVD Setup menu you can make vari ous adjustments to items such as picture and sound You can also set a language for the subtitles and the Setup menu among other things For details on each Setup menu item see pages 17 18 To display and exit the Menu Press SETUP MENU to display the menu A second press of SETUP MENU will take you back to initial screen To go to the next level Press gt on the remote control To go back to the previous level Press lt on the remote control General Operatio
38. e TV screen in the following sequence STOP CH 4 SP STEREO APR 30 SAT 2 15 PM REM 1 58 Real Time Counter If a tape with contents recorded on it is inserted into the VCR the real time counter shows length of the tape running in hours minutes and seconds Press DISPLAY to select the real time counter display Every press of DISPLAY changes the TV screen as illus trated below 2 15 AM 0 05 25 gt REM 1 07 CLOCK COUNTER REMAINING TIME Counter Memory This feature is useful if there is a section of tape you want to view immediately after recording or if you want to return to the same point several times 1 Begin recording or playing a tape 2 Press DISPLAY until the real time counter is dis played on the TV screen 3 At the point that you want to locate later reset the real time counter to 0 00 00 by pressing CLEAR 0000 4 Continue to play or record 5 Press STOP W when recording or playback fin ishes 6 Press REW lt 4 The tape automatically stops when the tape counter returns to about 0 00 00 Tape Remaining This function displays the amount of time remaining on the tape during recording or playback Press DISPLAY repeatedly until the REM indicator displays on the TV screen during recording or playback The remaining tape length may not be displayed cor rectly depending on the condition of the tape and the kind of the tape T 140 T 160 or
39. eiver will produce a strong distorted sound or no sound at all e Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is equipped with a Digital Multi channel decoder e To see the audio format of the current DVD in the on screen display press A MONITOR Rear of DVD VCR O Al x im iH i H T E i m vT UTT oo oi o 0 COAXIAL eT Amplifier Receiver Manufactured under license from Dolby Laboratories Dolby Pro Logic and the double D symbol are trademarks of Dolby Laboratories DTS and DTS Digital Out are trademarks of Digital Theater Systems Inc Accessory Audio Video A V Connections to DVD VCR Connect the VCR IN LINE 1 or LINE 2 jacks on the DVD VCR to the audio video out jacks on your accessory component using the optional audio video cables Refer to page 23 for Recording from External Components Accessory Component VCR Camcorder Video Camera Satellite Receiver Laser Disc Player Jack panel of Accessory Rear of DVD VCR Front of DVD VCR i 2 e i is oe 5 es ou Initial Settings VCR By usin
40. es result in advancing the recording time by 30 minute increments Note If you press PAUSE H during instant timer recording the instant timer recording is cancelled Recording from External Components You can record from an external component such as a camcorder or VCR connected to any of the DVD VCR s external inputs 1 7 Make sure that the component you want to record from is connected properly to the DVD VCR See page 13 Press AUX repeatedly to select the external input to record from e LINE1 L1 Audio Video Input mounted on back panel e LINE2 L2 Audio Video Input mounted on front panel Load a recordable tape Set a recording mode SP or SLP as necessary by pressing SPEED repeatedly Play the tape or disc in the external component If you have a TV attached to your DVD VCR you can see the video playing Press REC once to start recording The REC indicator lights in the display window Press STOP W to stop recording Notes Before recording confirm the recording start posi tion If your source is copy protected using CopyGuard you will not be able to record it using this unit See Copyright on page 6 for more details To record for a fixed length of time see Instant Timer Recording c 2 p ih O 2 e Copying from DVD to VCR You can copy the contents of a DVD to a VHS tape 1 Insert the disc you wish to copy into the DVD deck and close the dis
41. f the FCC Rules These limits are designed to provide reason able protection against harmful interference when the prod uct is operated in a residential installation This product gen erates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio commu nications However there is no guarantee that interference will not occur in a particular installation If this product does cause harmful interference to radio or television reception which can be determined by turning the product off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the product and receiver e Connect the product into an outlet on a circuit different from that to which the receiver is con nected e Consult the dealer or an experienced radio TV technician for help CAUTION concerning the Power Cord Most appliances recommend they be placed upon a dedicated circuit That is a single outlet circuit which powers only that appli ance and has no additional outlets or branch circuits Check the specification page of this owner s manual to be certain Do not overload wall outlets Overloaded wall outlets loose or damaged wall outlets extension cords frayed power cords or damaged or cracked wire insulation are danger ous
42. g the VCR Setup menu you can make various adjustments to items such as clock setting and timer recordings Your DVD VCR allows remote control adjustment of several features General Operation 1 Press VCR on the remote control 2 Press SETUP MENU and the MAIN menu will appear CLOCK PROGRAM TUNING SETUP DU SELECT GWG ENTER TO EXIT PRESS 3 Use A F to select the desired menu then press ENTER OK 4 Use A to choose a desired option on the select ed Menu Then use lt gt to choose a desired set ting 5 Press SETUP MENU when finished Note Menus remain on screen for 3 minutes CLOCK The DVD VCR gives you two ways to set the time and date the Auto Clock Feature or Manually Auto Clock Set MONTH JANUARY DAY 1 SUN YEAR 2006 TIME 12 00 AM AUTO CLOCK SET ON DAYLIGHT SAVINGS AUTO TIME ZONE AUTO DU SELECT fi ADJUST TO EXIT PRESS e AUTO CLOCK SET The Auto Clock Set feature is set to ON at the fac tory In the ON setting the DVD VCR looks for a channel carrying XDS Extended Data Services information XDS updates the clock using the Coordinated Universal Time Use lt gt to choose ON or OFF DAYLIGHT SAVINGS You can turn Daylight Savings On or Off manually If you choose AUTO the DVD VCR sets the clock using the DST information broadcast in the signal channel Use lt gt to choose AUTO ON or OFF TIME ZONE You can set your local Time Zone manually If
43. he Output Source is changed to VCR mode automatically e The power turns on automatically and playback begins e At the end of the tape the DVD VCR stops then rewinds e The tape is ejected after rewinding and the turns itself off automatically LOAD AUTO axe AUTO AUTO gt i pray P Rew gt SP POWER TAPE EJECT Note Auto power off does not function during regular DVD play mode DVD VCR power stays on S VHS Quasi Playback SQPB e This DVD VCR can play back S VHS recorded tapes however it cannot make recordings using S VHS format tapes e SQPB is an abbreviation for S VHS Quasi Playback Easy Information If the Extended Data Service XDS signals are pro vided along with normal TV signal in your area or during playback of a tape recorded with Extended Data Service XDS signals the station ID program title and program details are shown on the TV screen When viewing a channel with Extended Data Service XDS signals press ENTER OK and the station ID will appear on the TV screen Press ENTER OK again and the program details will appear on the TV screen When viewing a tape recorded with Extended Data Service XDS signals press ENTER OK twice and the program title and program details will appear on the TV screen Program Details LENGTH Indicates the run length of a program TIME REMAINING Indicates the remaining time of a program RATING Indicates
44. hen the DVD VCR is turned off standby mode press and hold CH on the front panel simultaneously for more than five seconds RFO3 or RFO4 appears in the display window 2 Press CH to change the RF output channel RFO3 or RFO4 Tune the TV to this channel 3 Turn off the DVD VCR Audio Video connection 1 Connect the DVD VCR VIDEO OUT jack on the DVD VCR to the video in jack on the TV using an optional video cable V 2 Connect the Left and Right DVD VCR AUDIO OUT jacks on the DVD VCR to the audio left right in jacks on the TV A1 using an optional audio cable Notes e If you use this connection set the TV s source selector to VIDEO e For DVD VCR VIDEO OUT jack connection resolution must be set to 480i or 480p however DVD VCR VIDEO OUT is always at 480i standard resolution Rear of TV Rear of DVD VCR Rear of TV Optional TV Connections These connections support only DVD playback The tuner and VCR still output through the RF OUT R or DVD VCR OUT A V jacks Audio connection Connect the Left and Right AUDIO OUT jacks of the DVD VCR to the audio left right in jacks on the TV using an optional audio cable A2 S Video connection Connect the S VIDEO OUT jack on the
45. in the DVD deck and Flashes when no disc P Indicates when the Progressive scan is active lt gt Indicates repeat mode DVD VCR is in timer recording or a timer recording is programmed VCR part only OO A cassette is in the VCR deck VCR The VCR deck is selected REC DVD VCR is Recording VCR part only PM Indicates PM time AM is not displayed TV Lights when TV mode is active J00 07 00 Indicates total playing time 1 LOM m N a O elapsed time remaining time or current deck status Playback Pause etc Remote Sensor Point the DVD VCR remote control here EJECT 4 Ejects the tape in the VCR deck CH To scan up or down through memorized channels REC To record normally or to activate One touch Timer Recording by repeated presses DVD VCR output select Select one of your output sources to view on the TV screen between DVD and VCR LINE2 VIDEO AUDIO L R Connect to the audio video output of an external source Audio system TV Monitor Another VCR oO re S gt ge 2 Remote Control A a OPEN CLOSE 1 EJECT ie Tvvcr DVD__VCR Aux S m NN MARKER SEARCH TITLE c Ei SUBTITLE ANGLE besal Ls RM SHROO9U DVD amp VCR POWER 5 I Switches DVD VCR ON and OFF DVD Select the DVD VCR function mode to DVD TV VCR To view channels selected by the VCR tuner or by the
46. l CH 3 or 4 If a direct VIDEO AUDIO con nection is made between the DVD VCR and the TV set the TV s source selector to VIDEO Insert a video cassette with the safety tab intact Select the desired channel using CH or the number buttons 0 9 The channel number appears on the TV screen If you are recording from another source via audio video input jacks at the rear or front panel select LINE1 rear jacks or LINE2 front jacks by using AUX Set the desired recording speed SP or SLP using SPEED The tape speed appears on the TV screen Press REC twice The menu appears on the TV screen recording starts and the TIMER indicator lights INSTANT TIMER RECORD CHANNEL 2 SPEED SP START NOW LENGTH 0H30M Press REC repeatedly to select the record ing time length Each time you press this button the recording time increases 30 minutes up to 9 hours At the end of the recording the DVD VCR will stop recording and shut off If you set the time to OHOOM the DVD VCR goes into the normal recording mode Press STOP W to stop the recording Note During Instant Timer Recording you cannot change the channel on the DVD VCR Checking the Recording Time Press REC once to check the recording time The recalled setting automatically returns to the TV screen after 6 seconds Extending the Recording Time The recording time can be extended anytime by pressing REC Subsequent press
47. l installation installation and removal from built in entertainment centers and other mounting systems Operational adjustments covered in the Owner s Manual normal maintenance including head cleaning Damage that occurs in shipment due to act of God and cosmetic damage Signal reception problems and failures due to line power surge Products used for commercial purposes including but not limited to rental Accessories Batteries except that Rechargeable Batteries are covered for 90 days from the date of purchase SNDU A ON There are no express warranties except as listed above AFTER THE WARRANTY Please contact JVC s Customer Care Center at 800 252 5722 to obtain the cost of out of warranty repair or replacement THE DURATION OF ANY IMPLIED WARRANTIES INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY IS LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN JVC SHALL NOT BE LIABLE FOR ANY LOSS OF USE OF THE PRODUCT INCONVENIENCE OR ANY OTHER DAMAGES WHETHER DIRECT INCIDENTAL OR CONSEQUENTIAL INCLUDING WITHOUT LIMITATION DAMAGE TO TAPES RECORDS OR DISCS RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY ALL EXPRESS AND IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PAR TICULAR PURPOSE ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE Some states do not allow the exclusion of incidental or consequential damages or limitations on how long an im
48. lder should be ENTER OK less than 1190 files Note Some discs may be incompatible due to a differ ent recording format or the condition of disc When viewing a JPEG file the user guidance will not E be displayed on the TV screen if the resolution is set Ensure that all the selected files have the jpg to 720p or 1080i extensions when copying into the CD layout If the files have jpe or jpeg extensions please rename them as jpg file File names without jpg extension will not be able to be read by this DVD VCR Even though the files are shown as JPEG image files in Windows Explorer Playing a DVD VR Format Disc This unit will play DVD R RW discs recorded using the DVD Video format that have been finalized using a DVD recorder e This unit will play DVD RW discs recorded using the Video Recording VR format 1 Insert a disc and close the tray It start playing automatically 2 The DVD VR menu appears on the TV screen when you press DISC MENU buttons while play ing 01 2005 01 01 SAT AVI 02 2005 01 01 SAT AV1 03 2005 01 01 SAT AV1 04 2005 01 01 SAT AV1 3 Press A F to select a track then press PLAY B or ENTER and playback starts 4 Press DISC MENU to move to the list menu Notes e Unfinalized DVD R RW discs cannot be played in this player e Some DVD VR disc are made with CPRM data by DVD RECORDER Player does not support these kinds of discs What is CPRM
49. mming AUTO CHANNEL SET TUNING BAND TV CH ADD DEL CH 5 ADD SOURCE SELECT TUNER DU SELECT ADJUST TO EXIT PRESS 1 Choose the SOURCE SELECT option then use lt gt to select TUNER Use lt gt to switch among TUNER LINE1 and LINE2 2 Choose the AUTO CHANNEL SET option then use lt gt to find channels e The tuner will automatically cycle through all available channels TV CATV in the area and place them in the tuners memory e After the AUTO CHANNEL SET is complete the TUNING menu will hide and return to the TV screen automatically 3 Make sure the TUNING BAND is set appropriately TV or CATV e TV If you are using a standard antenna to receive channels e CATV If you are using basic cable to receive channels To Add or Erase Channels This feature allows you to add or erase channels from memory manually 1 Choose the CH ADD DEL option then use lt gt to select a channel to add or erase 2 Use ENTER OK to add or erase the channel Repeat steps 1 and 2 to add or erase other channels 3 Press SETUP MENU to return to the TV screen SETUP FUNCTION OSD ON AUDIO MODE HIRI BROADCAST TYPE STEREO AUDIO OUTPUT STEREO DU SELECT ADJUST TO EXIT PRESS FUNCTION OSD The on screen display can be turned on or off AUDIO MODE The DVD VCR has two separate audio playback sys tems the high quality VHS Hi Fi system and standard NORMAL mono system The same audio is generally rec
50. n 1 Press DVD on the remote control 2 Press SETUP MENU The Setup menu appears 3 Use A F to select the desired option then press gt to move to the second level The screen shows the current setting for the selected item as well as alternate setting s 4 Use A F to select the second desired option then press gt to move to the third level 5 Use A F to select the desired setting then press ENTER OK to confirm your selection Some items require additional steps 6 Press SETUP MENU or PLAY B to exit the Setup menu LANGUAGE LANGUAGE re Menu Language Disc Audio Disc Subtitle gt English gt Original gt Off Ps Disc Menu gt Original Move gt Select Menu Language Select a language for the VCR and DVD s setup menu and information display Disc Audio Subtitle Menu Select the language you prefer for the audio track disc audio subtitles and the disc menu Original Refers to the original language in which the disc was recorded Other To select another language press number buttons then ENTER OK to enter the corresponding 4 digit number according to the language code list in the reference chapter see page 32 If you enter the wrong language code press CLEAR 0000 Off for Disc Subtitle Turn off Subtitle DISPLAY DISPLAY TY Aspect gt Move gt Select TV Aspect 4 3 Select when a standard 4 3 TV is connected 16 9 Select when a 16 9 wide TV is
51. n To ensure proper use of this product please read this owners manual carefully and retain for future refer ence This manual provides information on the operation and maintenance of your DVD VCR Should the unit require service contact an authorized service loca tion Moisture Condensation Never operate the DVD VCR immediately after mov ing it from a cold location to a warm location Leave it for two or three hours without operating it If you use the DVD VCR in such a situation it may damage disc tapes and internal parts Symbol Used in this Manual Note Indicates special notes and operating features Tip Indicates tips and hints for making the task easier A section whose title has one of the following symbols is applicable only to the disc represented by the sym bol All discs listed below DVD and finalized DVD R RW Video CDs Audio CDs About the 2 Symbol Display may appear on your TV display during operation and indicates that the function is not permitted by this unit or the disc Notes on Discs Handling Discs Do not touch the playback side of the disc Hold the disc by the edges so that fingerprints do not get on the surface Never stick paper or tape on the disc Storing Discs After playing store the disc in its case Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight Cleaning Discs Fingerprints and dus
52. n will be highlighted the selected time 3 Use lt or gt to select 3D SUR To turn off the 3D Surround effect select Normal Marker Search To enter a Marker ACD You can start playback from up to nine memorized 1 Press A MONITOR during playback points To enter a marker press MARKER at the 3D SUR appears on the menu screen desired point on the disc The Marker icon appears 2 To return to normal playback press A MONITOR on the TV screen briefly Repeat to enter up to nine repeatedly until 3D SUR disappears from the markers menu screen To Recall or Clear a Marked Scene 1 During disc playback press SEARCH The marker search menu appears on the screen 2 Within 10 seconds press lt 4 gt to select a marker number that you want to recall or clear 3 Press ENTER OK and playback starts from the marked scene Or press CLEAR 0000 and the marker number is erased from the list 4 You can play any marker by inputting its number on the marker search menu Last Scene Memory This player memorizes last scene from the last disc that is viewed The last scene remains in memory even if you remove the disc from the player or switch off the player If you load a disc that has the scene memorized the scene is automatically recalled Note This player does not memorize the scene of a disc if you switch off the player before commencing to play the disc Screen Saver The screen saver appears whe
53. n you leave the DVD VCR in Stop mode for about five minutes Playing an Audio CD This unit can play Audio CDs Audio CD Once you insert an Audio CD a menu appears on the TV screen Press A to select a track then press PLAY or ENTER OK and playback starts You can use variable playback functions Refer to pages 26 28 Avo m 00 00 00 List ain E Program Note When playing an Audio CD with HDMI OUT as the output the beginning of some songs may not be played Programmed Playback The program function enables you to store your favor ite tracks from any disc in the player memory A program can contain 30 tracks 1 Insert an Audio CD AUDIO CD menu appears 2 During STOP mode press PROGRAM and the mark will appear Note Press PROGRAM again to exit the program edit mode then the mark will disappear 3 Select a track on the List then press ENTER OK to place the selected track on the Program list Repeat to place additional tracks on the list 4 Select the track you want to start playing on the Program list 5 Press PLAY or ENTER OK to start Playback begins in the order in which you programmed the tracks Playback stops after all of the tracks on the Program list have played once 6 To resume normal playback from programmed playback select a track on the list and then press PLAY B Repeat Programmed Tracks Press REPEAT to select a desired repeat mode e
54. nected with the e Select the correct input mode of the audio cable is not set to receive audio receiver so you can listen to DVD VCR signal output the sound from the DVD VCR e The audio cables are not connected Connect the audio cable into the securely jacks securely e The power of the equipment con e Turn on the equipment connected nected with the audio cable is turned with the audio cable off e The AUDIO options are set to the wrong position e In HDMI mode audio selection is not set to PCM The playback picture is e The disc is dirty Clean the disc poor The TV channels are not tuned in e Check tuning carry out tuning again properly e Tape heads are dirty Clean video heads Use CH for manual tracking Tape is a rental or was recorded on another VCR adjustment while tape is playing Set the AUDIO options to the correct position Change AUDIO setup to PCM mode Symptom Correction The DVD VCR does not e No disc is inserted e Insert a disc or tape Check that the start playback e No tape is inserted disc or tape indicator in the display window is lit e An unplayable disc is inserted e Insert a playable disc Check the disc type and Regional code e The disc is placed upside down e Place the disc with the playback side down e The disc is not placed within the e Place the disc on the disc tray cor guide rectly inside the guide e The disc is dirty e Clean the disc
55. ode automatically e If you insert a cassette tape without prevention tab while the DVD VCR is in the DVD mode the DVD VCR will switch to VCR mode automatically Front Panel Hi Fi STEREO g aa a rew PLAY e _purPuT STATUS HOA OHH H Disc Tray DVD deck Insert a disc here Cassette Compartment VCR deck Insert a video cassette here POWER I Switches the DVD VCR ON and OFF REW lt lt DVD Skip to beginning of current chapter or track press twice in quick successions to go to previous chapter or track Press and hold button for about two seconds to search backward VCR Rewinds the tape during the stop mode or for fast reverse picture search PLAY P gt Starts playback of a disc or tape FF gt gt DVD Skip to next chapter or track Press and hold for two seconds for a fast forward search VCR Advances the tape during the STOP mode or for fast forward picture search STOP W Stops playback of the disc or tape OPEN CLOSE 4 Opens or closes the disc tray OUTPUT STATUS You can change the resolution depending on your TV HDMI mode You can switch among the 480p 720p or 1080i resolution Component mode You can switch among 480i 480p 720p or 1080i resolution Display Windows DVD The DVD deck is selected A disc is in the DVD deck Lights when a disc is
56. om over heating The openings should be never be blocked by placing the product on a bed sofa rug or other similar surface This product should not be placed in a built in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instruction have been adhered to CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT CLASSE 1 PRODUIT LASER CAUTION This product employs a Laser System To ensure proper use of this product please read this owner s manual carefully and retain it for future reference Should the unit require maintenance contact an authorized service center Performing controls adjustments or carrying out procedures other than those specified herein may result in hazardous radiation exposure To prevent direct exposure to laser beam do not try to open the enclosure Visible laser radiation when open DO NOT STARE INTO BEAM CAUTION The apparatus should not be exposed to water dripping or splashing and no objects filled with liquids such as vases should be placed on the apparatus CAUTION VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED CAUTION Changes or modifications not approved by JVC could void user s authority to operate the equipment REGULATORY INFORMATION FCC Part 15 This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 o
57. orded on both systems The VHS Hi Fi system plays on separate left and right channels and the NORMAL system plays monaural sound The normal track is always played so the cassette can be played on a DVD VCR that does not have VHS Hi Fi BROADCAST TYPE STEREO SAP MONO Multichannel Television Sound MTS carries stereo and or Second Audio Program SAP bilingual sig nals Set this display to the desired position when both MTS stereo and SAP signals are received When only one of the MTS signal is received the DVD VCR automatically selects the corresponding receiving mode Stereo or SAP regardless of the selected position For normal operation the display should be in the STEREO position The DVD VCR will then record a STEREO program when available and record a mono program IF the program is NOT IN STEREO For weak STEREO and or SAP broad casts changing the display to mono may give clearer sound AUDIO OUTPUT STEREO LEFT RIGHT Used during playback when AUDIO MODE HI FI NORMAL is in HI FI position for selecting the audio output signals from the AUDIO OUT terminals L ch and R ch and RF OUT This display setting should normally be left in the stereo position so that when a stereo tape is played the stereo sound will be heard through the left and right channels If a mono tape is played and the audio output is set to stereo the same mono sound will be heard from both left and right channels i 2 e i i o
58. ound to be defective within the warranty period JVC will at its option either repair or replace the defective part s or replace the product with a new or refurbished functionally equivalent product Within 90 days from date of retail sale repair or replacement will be at no charge to the customer WHAT YOU MUST DO FOR WARRANTY SERVICE Please do not return your product to the retailer Instead please box the product carefully preferably in the original carton and ship insured to the JVC repair replacement facility nearest you To obtain the address of the location nearest you please call 800 252 5722 or visit our website at http www jvc com A COPY OF YOUR BILL OF SALE A COMPLETED WARRANTY REPAIR REPLACEMENT FORM AND ALL OF THE ORIGINAL ACCESSORIES WHICH CAME WITH YOUR UNIT MUST ACCOMPANY THE PRODUCT TO BE ELIGIBLE FOR REPAIR REPLACEMENT UNDER WARRANTY If you have any questions concerning your JVC Product please contact our Customer Care Center at 800 252 5722 WHAT IS EXCLUDED The warranty does not cover 1 Products which have been subject to abuse accident alteration modification tampering negligence misuse faulty instal lation lack of reasonable care or if repaired or serviced by anyone other than a service facility authorized by JVC to render such service or if affixed to any attachment not provided with the products or if the model or serial number has been altered tampered with defaced or removed Initia
59. playback pictures Set your preference and monitor s ability On Expanded grey scale 0 IRE cut off Off Standard grey scale 7 5 IRE cut off Remote Control Function Remote Control A B C Code Switching The remote control is capable of controlling three JVC video units independently Each of the units can respond to one of three codes A B or C The remote control is preset to send C code signals because your unit is initially set to respond to C code signals You can easily modify your unit to respond to A or B code signals Ol gt 1 3 Jvc RM SHR009U DVD amp VCR e Keep pressing ENTER down during step 1 1 Press the number key 1 for A 2 for B or 3 for C to change the remote control code 2 Press l on the unit to turn off the unit with no video tape inserted 3 Press on the unit for over 5 seconds while the unit is turned off The current code appears on the display window 4 Press W on the remote control to change the unit s code The new code currently set on the remote control blinks on the display window for approximately 5 seconds and is applied to the unit Operations VCR This chapter describes how to operate the VCR and DVD VCR Tape Playback Press the VCR button to select the device to be oper ated Basic Instructions 1 Turn on the
60. plied warranty lasts oO so these limitations or exclusions may not apply to you This warranty gives you specific legal rights and you may also have other 3 rights which vary from state to state c S JVC COMPANY OF AMERICA 1700 Valley Road y DIVISION OF JVC AMERICAS CORP Wayne New Jersey 07470 E http www jvc com FIDAADAAAADAAADAAADADAAADASAAASAAS taata tataan SASS A SAAS SAAS AAAS ASS AAAS SASS AAAS ASA ataata aaa REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY THIS WARRANTY DOES NOT APPLY FOR DETAIL OF REFURBISHED PRODUCT WARRANTY PLEASE REFER TO THE REFURBISHED PRODUCT WARRANTY INFORMATION PACKAGED WITH EACH REFURBISHED PRODUCT SID Ob bbb bbb bbb bbb bbb bbb bb bbb bbb bbb bob bbb bbb bbb bbb bob bbb bbb bbb bbb bob bbb bbb bt ob bb bbb E E E SOOO ob Ob Ob Ob bbb bot Ob bob bbb bt bb tb bot bb ot i tot bb bt bb tb bob bb bob bb bb tb bt bbb bbb bbb bt bb ot abbot bbb bt A ttt For customer use Enter below the Model No and Serial No which is located either on the rear bottom or side of the cabinet Retain this information for future reference Model No Serial No Purchase Date Name Of Dealer FIA IAIAIAIAIAIIAIAI AAAI AAA AAAS SSA SAS ASA SSSA kk JVC WARRANTY REPAIR REPLACEMENT FORM PLEASE COMPLETE THE FOLLOWING PLEASE NOTE P O BOXES ARE NOT ACCEPTABLE NAME STREET ADDRESS CITY STATE ZIPCODE DAY TIME PHONE NUMBER REASON FOR RETURN
61. ring playback press SKIP lt 4 or BPI to go to the next QZYaE chapter track or to return to the beginning of the current chapter track Press SKIP k twice briefly to step back to the previous chapter track REW FF lt lt gt gt During playback press REW lt 4 or FF gt gt repeatedly to select the required scan speed DVD 4 steps Video CD Audio CD 3 steps While the playback is paused press FF PP repeatedly to play in slow motion 4 steps forward only REPEAT During playback press REPEAT repeatedly to select a ALL desired repeat mode DVD Video discs Chapter Title Off Video CD Audio CD Track All Off Notes e If you press SKIP gt P once during Repeat Chapter playback the repeat playback cancels e For Video CD with PBC you must set PBC to Off on the Setup menu to use this function See PBC on page 18 REPEAT A B During playback each press of REPEAT A B button to select point A and point B and repeats a sequence from point A Starting point to point B End point Note The A B repeat function is available only in the current track Buttons Operations Discs ZOOM During playback or pause mode press ZOOM to enlarge the video image 3 steps You can move through the zoomed picture using 4 gt A V buttons Press CLEAR 0000 to exit Notes e Zoom may not work on some DVDs e For JPEG files the zoom function is not available when the resolution is set to 720p or 1080i RAN
62. s operated 10 Protect the power cord from being walked on or pinched particularly at plugs convenience recepta cles and the point where they exit from the product Keep these instructions The safety operating and 11 Only use attachments accessories specified by the use instructions should be retained for future reference manufacturer Heed all warnings All warnings on the product and in the operating instructions should be adhered to Follow all instructions All operating and use instruc 8 tions should be followed Do not use this product near water For example yy near a bath tub wash bowl kitchen sink laundry tub in a wet basement or near a swimming pool and other areas located near water i 2 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with appara Clean only with dry cloth Unplug this product from tus When a cart is used use caution when moving the wall outlet before cleaning Do not use liquid clean the cart product combination to avoid injury from els tip over Do not block any ventilation openings Install in 13 Unplug this product during lightning storms or when accordance with the manufacturer s instructions unused for long periods of time Slots and openings in the cabinet are provided for ven tilation and to ensure reliable operation of the product td 5 14 Refer all servicing to qualified service personnel and
63. ses each type of signal through without any further processing Check the documentation for your amplifier to verify its capabilities DRC Dynamic Range Control With the DVD format you can hear a program s soundtrack in the most accurate and realistic pre sentation possible thanks to digital audio technology However you may wish to compress the dynamic range of the audio output the difference between the loudest sounds and the quietest ones This allows you to listen to a movie at a lower volume without los ing clarity of sound Set DRC to On for this effect Vocal Set to On only when a multi channel karaoke DVD is playing The karaoke channels on the disc mix into normal stereo sound i 2 e g i oe 5 es ou OTHERS OTHERS 7 PBC Auto Play BLE Move gt Select PBC Set Playback Control PBC to On or Off On Video CDs with PBC are played according to the PBC Off Video CDs with PBC are played the same way as Audio CDs Auto Play You can set up the DVD VCR so a DVD disc auto matically starts playing whenever the DVD is inserted If Auto Play mode is set to On this DVD player will search for title that has the longest playback time and then play back the title automatically On Auto Play function is active Off Auto Play function is not active Note The Auto Play function may not work for some DVDs B L E Black Level Expansion To select the black level of
64. t on the disc can cause poor picture quality and sound distortion Before playing clean the disc with a clean cloth Wipe the disc from the center out O x Do not use strong solvents such as alcohol benzene thinner commercially available cleaners or anti static spray intended for older vinyl records About the Remote Control Operation Range Point the remote control at the remote sensor and press the buttons Distance About 23 ft 7 m from the front of the remote sensor About 30 in each direction of the front of the remote sensor Angle Battery installation Detach the battery cover on the rear of the remote control and insert two RO3 AAA size batteries with and aligned cor rectly mix different types of batteries such as stan i Do not mix old and new batteries and never dard alkaline etc oO as S gt pe 2 Types of Playable Discs DVD 8 cm 12 cm disc COMPACT empet Audio CD and Video CD Wise wee MISE DIGITAL VIDEO 8 cm 12cm disc In addition this unit plays DVD R DVD R DVD RW DVD RW SVCD and CD R CD RW that contains audio titles and or JPEG files This indicates a product feature that is RW capable of playing DVD RW discs recorded COMPATIBLE with Video Recording format VIDEO Notes e Depending on the conditions of the recording equip ment or the CD R RW or DVD R RW disc itself some CD R RW or DVD R RW discs cannot be pl
65. the rating of the current program N A G PG PG 13 R NC 17 X and Not Rated The rating N A means that the motion picture ratings are not applicable to this program CH 4 SP WABC STEREO Home video APR 30 SAT 2 15 PM Easy Information Screen Station ID PROGRAM DETAILS Home video LENGTH 01 00 TIME REMAINING 00 26 RATING N A Easy Information Screen Program details c p ih O 2 e Operations DVD Playback Setup e Turn the TV on and select the video input source connected to this unit e Audio System Turn the Audio System on and select the input source connected to this unit 1 Press OPEN CLOSE 4 to open the disc tray 2 Load your chosen disc in the tray with the playback side down 3 Press OPEN CLOSE 4 to close the tray READING appears on the display window and playback starts automatically If playback does not start press PLAY B In some cases the disc menu might appear instead General features Buttons Operations Discs OPEN CLOSE amp Opens or closes the disc tray ALL STOP W During playback press STOP W to stop playback The unit records the stop point depending on the disc HE appears on the screen briefly If you press STOP W again ll appears on the screen and the unit will clear the stop point PAUSE I During playback press Il to pause playback ALL Press Il repeatedly to play Frame by Frame SKIP k lt PPI Du
66. with the DVD VCR If you use a cable converter you can program multiple recordings only on the converter box output channel This is because the converter determines what channel you view through your DVD VCR SPEED AUTO mode determines how much tape is left and switches the speed from SP to SLP if it is necessary to complete recording the program If this occurs there could be some picture and sound distortion at the point where the speed changes REPEAT To record up to 8 programs on a certain day of every week select WEEKLY To record up to 8 programs at the same time Monday through Friday select DAILY Otherwise select ONCE Press SETUP MENU and the program is memo rized by the DVD VCR Additional programs may be entered by repeating steps 1 7 Ensure you insert a tape with the record safety tab intact before the first programmed time 10 Press STOP W to end timer recording Notes If you make a mistake or want to change a setting use A to select the option and correct it using lt P gt If the program preset time is past the PAST TIME PROGRAMMED message appears on the TV screen Return to the incorrect program and pro gram it with the correct time If you enter a past date the timer recording will be performed on that date of the next year If the power fails or the DVD VCR is unplugged the clock and timer settings are kept in memory for only 3 seconds Otherwise you must reset the clock and timer
67. you choose AUTO the DVD VCR sets the clock using the first Coordinated Universal Time information it finds in a broadcast signal Use lt P gt to choose the correct time zone AUTO EASTERN CENTRAL MOUNTAIN PACIFIC ALASKA or HAWAII Notes e The Auto Clock feature enables the DVD VCR to set up the clock while the DVD VCR is turned off e There are cases where the TV station does not send or sends wrong date and or time information and the DVD VCR sets the incorrect time If this happens we recommend that you set the clock manually Manual Clock Set Use A lt gt to enter the necessary information e MONTH Choose the month e DAY Choose the date The day of the week will display automatically e YEAR Choose the year TIME Choose the time Press and hold lt gt to advance clock continuously Notes e If setting the clock manually AUTO CLOCK SET must set to OFF If it is set to ON an incorrect date and or time will be entered again when the DVD VCR is turned off e The clock uses the 12 hour system Be sure to set AM and PM correctly PROGRAM The Timer Recording function allows you to record up to 8 programs within a period of one year See pages 21 22 TUNING This DVD VCR is equipped with a frequency synthe sized tuner capable of receiving up to 181 channels These include VHF channels 2 13 UHF channels 14 69 and CATV channels 1 125 Auto Channel Progra

Download Pdf Manuals

Related Search

Related Contents

必ず葡萄を切って本体やランプガ冷えてから行ってください。  Bravetti EP565SI-NS Mixer User Manual  お客様用 傘掛け 取付 =取扱説明書  簡単セットアップガイド    Installation Guide  Philips Tornado 871829113901000 energy-saving lamp  Dicota DataCourier  deutsch - BD|SENSORS  

Copyright © All rights reserved. Failed to retrieve file