JVC HR-S8009UM User's Manual
Contents
1. To make corrections any time during the process Press OK or gt repeatedly until the item you want to change blinks then press AV Initial Settings Tuner Setting Setting channels automatically Auto Channel Set Perform Auto Channel Set only if channels have not been set correctly by the Plug amp Play setting EE Access Main Menu screen then Tuner Set screen Press MENU on the Remote Press A V to move the highlight bar arrow to TUNER SET then press OK or gt FA Perform Auto Channel Set Press V to move the highlight bar arrow to AUTO CHANNEL SET then press OK or The VCR selects the correct band TV or CATV automatically during Auto Channel Set When Auto Channel Set is complete SCAN COMPLETED appears on screen f the scan was unsuccessful SCAN COMPLETED NO SIGNAL appears on screen Check the connections and start again Press MENU to return to normal screen MAIN MENU FUNCTION SET gt TUNER SET INITIAL SET PRESS a v THEN OK PRESS MENU TO END TUNER SET BAND CATV gt AUTO CHANNEL SET MANUAL CHANNEL SET SELECT WITH 4 AND OK PRESS MENU TO END AUTO CHANNEL SET SCANNING PRESS MENU TO END Setting channels manually Manual Channel Set You can add the channels you want or delete the channels you do not want manually EE Access Main Menu screen then Tuner Set screen Press MENU on the Remote Press A V2. f the cassette s record safety tab has been removed playback begins automatically PA Start playback Press PLAY P The S VHS indicator lights up when you play back a tape recorded in S VHS mode or in S VHS ET mode pg 9 During playback Stop playback Press STOP W on the OR Press STOP EJECT W 4 on Remote the VCR Pause playback and view still picture Press PAUSE ID Press PLAY P to resume normal playback NOTE During still picture vertical vibration may appear on the TV screen Press PR on the remote to get a clearer picture Pause and Frame by Frame playback Press PAUSE If to pause then press lt lt or gt gt or PAUSE ID repeatedly Press PLAY P to resume normal playback Press REW lt lt or FF PP Press PLAY P to resume normal playback If you press and hold REW Eq or FF gt for more than 2 seconds simply releasing it cancels the picture search and normal playback resumes Variable Speed Picture Search including slow motion Press kad or Pl repeatedly Press PLAY P to resume normal playback Each time you press kad or BPI the playback speed changes To decrease the speed during picture search press the opposite direction button repeatedly During still picture press and hold BI to start forward or ked to start reverse slow motion playback When you release the button still picture resumes During still picture holding
3. in an environment where strong magnetic fields are generated on a surface that is unstable or subject to vibration 2 DO NOT block the VCR s ventilation openings or holes If the ventilation openings or holes are blocked by a newspaper or cloth etc the heat may not be able to get out 3 DO NOT place heavy objects on the VCR or Remote 4 DO NOT place anything which might spill on top of the VCR or Remote If water or liquid is allowed to enter this equipment fire or electric shock may be caused DO NOT expose the apparatus to dripping or splashing DO NOT use this equipment in a bathroom or places with water Also DO NOT place any containers filled with water or liquids such as cosmetics or medicines flower vases potted plants cups etc on top of this unit 7 DO NOT place any naked flame sources such as lighted candles on the apparatus AVOID violent shocks to the VCR during transport 5 6 8 MOISTURE CONDENSATION Moisture in the air will condense on the VCR when you move it from a cold place to a warm place or under extremely humid conditions just as water droplets form on the surface of a glass filled with cold liquid Moisture condensation on the head drum will cause damage to the tape In conditions where condensation may occur keep the VCR s power turned on for a few hours to let the moisture dry How to use the Remote Before use insert two AA size batteries into the Remote with the
4. polarity and matched correctly as indicated on the battery compartment or on the lid The Remote can operate most of your VCR s functions as well as basic functions of TV sets cable boxes and DBS receivers Point the Remote toward the remote sensor on the target component The maximum operating distance of the remote control is about 8m NOTE If the Remote does not work properly remove its batteries wait for a few seconds replace the batteries and then try again Video heads cleaning The heads get dirty in the following cases in an environment prone to extreme temperature or humidity in a dusty environment flaw dirt or mold on video tapes continuous usage for a long time Use a dry cleaning cassette TCL 2 when Rough poor picture appears while a tape is played back The picture is unclear or no picture appears USE CLEANING CASSETTE appears on the screen only with SUPERIMPOSE set to ON C pg 12 ATTENTION To mobile phone users Using a mobile phone in the vicinity of the VCR may cause picture vibration on the TV screen or change the screen to a blue back display On placing the VCR Some TVs or other appliances generates strong magnetic fields Do not place such appliance on top of the VCR as it may cause picture disturbance a Buttons Connectors and Indicators Front Panel STOP EJECT H A Cassette loading slot PLAY gt VIDEO AUDIO
5. PAUSE IB for more than 2 seconds also starts forward slow motion playback If you press PAUSE I again still picture resumes NOTE During slow motion some noise may appear on the TV screen Press PR on the remote to eliminate the noise Playback Reverse Forward Reverse slow motion 2 steps Reverse play Reverse search 2 steps When the tape is not running Rewind fast forward Press REW lt lt or FF PP Eject the tape Press STOP EJECT H 4 You can also eject the cassette when the VCR is turned off Turn off the VCR Press POWER 0 1 Playback Features Adjusting tracking condition tracking adjustment Automatic tracking adjustment Whenever you insert a tape and start playback automatic tracking starts working and continuously analyzes the signal to enable optimum picture quality during playback Manual tracking adjustment If automatic tracking cannot eliminate noises well during playback follow the procedures below E Press SP EP 4 on the Remote during playback to activate manual tracking BA Press PR and to eliminate the noises Press it briefly for a fine adjustment or press and hold for a coarse adjustment Press SP EP 4 again to reactivate automatic tracking Selecting monitor sound Audio Monitor While playing back a tape on which stereo sound or SAP sound is recorded press AUDIO on the Remote Each time you press the but
6. input connectors sensor Display panel Timer mode indicator Play indicator yes VCR mode indicator S VHS mode indicator Record indicator Channel and auxiliary input Clock time Rear Panel AC power cord Lithium battery compartment ANT IN AUDIO VIDEO OUT 5 VIDEO OUT RF OUT Buttons Connectors and Indicators Remote TV CABLE SAT R l CABLE POWER vE TSS aD 5 E tv ver 4 A C i AUDIO AqA 3 REVIEW Dg a m Number keys a VPS PDC x 0000 H2 all o 0000 er STOP eae a Sane DATE Bee T SP EP 7 47 PROG t sT 30 SEC amp TE L Te PLAY gt REW A a a WE lei FF gt gt REC Siege PAUSEN STOP E VEE ae Were Sor DEBUT START PR MENU KEAT E ENTERI AV Les Pam eN SSS TV PR SS gt lt lt gt PRS TV A1 JVC VPS PDC is not currently available in South America and not possible with this VCR On screen display If you press OK on the Remote when SUPERIMPOSE is set to ON gt pg 12 you can see the current VCR status on the TV screen To clear the time counter press OK again The indications are not recorded even if the VCR is in the recording mode oe Tcu125 RECORD tau 12 00 am PAUSE STEREO WARNING Cc SP eo SAP TIMER RECORDING 0 TO START SOON CANCEL
7. Bees Pee ee e e RD TO f H O uom peman i ake Channel and auxiliary input Day and clock time STEREO program indication SAP indication Audio monitor indications O Time counter Tape Remaining Time Index number Tape position Cassette mark Tape speed VCR operation mode Timer warning display To recall an indication 1 Press OK All indications corresponding to the current status are displayed for 5 seconds After that the counter information and RECORD PAUSE if in the Record Pause mode are left displayed on the screen 2 Press OK again to clear the display The RECORD PAUSE indication is left displayed on the screen E Basic Connections EE Check contents Make sure the package contains all of the accessories listed in Specifications I pg 16 FJ Situate VCR Place the VCR on a stable horizontal surface EJ Connect VCR to TV Antenna or cable i Coaxial cable Flat feeder Matching transformer 4 not supplied AC power cord Back of VCR AC outlet To audio video input connectors Audio video cable not supplied RF cable supplied S video cable supplied To S video input connector RF Connection Disconnect the TV antenna from the TV Connect the TV antenna cable to the ANT IN terminal on the rear of the VCR Connect the supplied RF cable between the RF OUT te
8. Then select the channel you want to watch on the TV Second Audio Recording This VCR s built in MTS decoder enables reception of Multichannel TV Sound broadcast To record a SAP program received set 2ND AUDIO RECORD to ON pg 13 Recording Resume Function If there is a power outage during recording or Instant Timer Recording or timer recording the recording will resume automatically when the power is restored to the VCR No setting is required for this function S VHS Super VHS S VHS ET or VHS Recording Mode This VCR can record in S VHS Super VHS S VHS ET or VHS To record in S VHS Set S VHS MODE to ON CF pg 13 Then insert a cassette marked S VHS The S VHS indicator lights up on the display panel The S VHS recording mode is selected To record in S VHS ET on a VHS cassette Set S VHS ET to ON CF pg 12 Then insert a cassette marked VHS The S VHS indicator lights up on the front display panel To record in VHS Insert a cassette marked VHS Set S VHS ET to OFF CF pg 12 To record in VHS on an S VHS cassette Insert a cassette marked S VHS The S VHS indicator lights up on the display panel Then set S VHS MODE to OFF C pg 13 The S VHS indicator goes off The VHS recording mode is selected NOTE When playing back a tape that has been recorded in S VHS or S VHS ET the S VHS indicator
9. a stereo program is accompanied by SAP sound WE AUDIO MONITOR HI FI HI FI L HI Fl R NORM MIX This VCR can record two sound tracks simultaneously normal and Hi Fi on a Hi Fi stereo tape You can select the sound track s to listen to while playing back a Hi Fi stereo tape In addition when playing back a prerecorded tape containing two separate audio programs on the Hi Fi tracks you can choose either one by selecting either HI FI L or HI FI R HI FI Normally select this Hi Fi sound is played back HI FI L Sound on the left Hi Fi channel is played back HI FI R Sound on the right Hi Fi channel is played back NORM Sound on the normal track is played back MIX Both sounds on the Hi Fi track and normal track are mixed and played back NOTES While playing back a monaural tape sounds on the normal track will be heard regardless of this setting f RF connection is used for viewing pictures on the TV sound will be monaural even though you select HI FI You can also use the AUDIO button on the Remote to select the desired monitor sound E S VHS MODE ON OFF You can determine which recording mode either S VHS mode or VHS mode is used for recording on S VHS tapes When this function is set to ON you can record on S VHS tapes with S VHS picture quality When this function is set to OFF you can record on S VHS tapes with VHS picture quality S VHS mode allow
10. lights up on the display panel regardless of the S VHS ET or S VHS MODE setting E Timer Recording Up to 8 timer recording programs can be made using Express timer programing method as far as a year in advance Remember the clock must be set before you can program the timer NOTES f all the 8 programs have already been set PROGRAM FULL appears on the TV screen After timer recording is completed the VCR turns off automatically You can program the timer recording while a regular recording is in progress the menu screens will not be recorded To timer record cable channels be sure to keep the cable box turned on with the correct channel selected n case of a power failure after programming the VCR s memory backup keeps your selections if the lithium battery is not exhausted f the tape reaches its end during timer recording the recording stops and O and on the display panel blink Press to disengage timer then press STOP EJECT 4 on the VCR to eject the cassette or press POWER 0 1 then press REW 44 to rewind the tape Express Timer Programing Load a cassette with the record safety tab intact The VCR turns on and the counter is reset automatically E Press PROG on the Remote to access the Program screen FA Press START STOP DATE or PR repeated
11. speed switches from SP to EP mode on the tape This function is not available during ITR Instant Timer Recording and will not work properly on the following tapes T ST 30 T ST 60 T ST 90 and T ST 120 WE VIDEO STABILIZER ON OFF When this function is set to ON you can automatically correct vertical vibrations in the picture when playing back unstable recordings made on another VCR NOTE To watch recordings with close caption or when you finish viewing a tape set this function to OFF Other Functions W BLUE BACK ON OFF When this function is set to ON the TV screen becomes all blue when receiving a channel not in use NOTE When you want to receive an unstable channel with poor signals set this function to OFF E 2ND AUDIO RECORD ON OFF When this function is set to ON If a SAP program is received the SAP audio is recorded on both the normal and Hi Fi tracks The main audio is not recorded If a non SAP program is received the main audio is recorded on both the Hi Fi and normal tracks When this function is set to OFF the SAP audio cannot be recorded NOTES When the channel is changed on the VCR The STEREO indication appears on the screen for about 5 seconds if the program is a stereo broadcast The SAP indication appears on the screen for about 5 seconds if the program is a SAP broadcast Both indications appear when
12. the highlight bar arrow to INITIAL SET then press OK or MAIN MENU FUNCTION SET TUNER SET gt INITIAL SET PRESS 4 THEN OK PRESS MENU TO END INITIAL SET CLOCK SET gt LANGUAGE ENGLISH FA Select language Press AV to move the highlight bar arrow to LANGUAGE then press OK or gt repeatedly until the desired language is selected Press MENU to return to normal screen Clock Setting Perform clock setting only if the clock has not been set correctly by the Plug amp Play setting SELECT WITH 4 AND OK PRESS MENU TO END MAIN MENU FUNCTION SET TUNER SET gt INITIAL SET EE Access Main Menu screen then Initial Set screen Press MENU on the Remote Press V to move the highlight bar arrow to INITIAL SET then press OK or gt PRESS THEN OK PRESS MENU TO END FA Access Clock Set screen Press AV to move the highlight bar arrow to CLOCK SET then press OK or Ba INITIAL SET gt CLOCK SET LANGUAGE ENGLISH SELECT WITH 4 AND OK PRESS MENU TO END Ef Set time date and year Press AV until the desired time appears then press OK or Set the date and year in the same way Holding AV changes the time in 30 minute intervals or changes the date in 15 day intervals ZY Start clock Press MENU and normal screen appears CLOCK SET STIME _ DATE YEAR 4 gt PRESS a v THEN OK PRESS MENU TO END
13. 2 minutes When the specified portion of the tape is skipped normal playback resumes automatically To return to normal playback during Skip Search press PLAY P a Recording Accidental erasure prevention To prevent accidental recording on a recorded cassette remove its record safety tab To record on it later cover the hole with adhesive tape eS Record safety tab Basic Recording BE Load a cassette Make sure the record safety tab is intact If not cover the hole with adhesive tape before inserting the cassette The VCR turns on and the counter is reset automatically FA Select recording channel On the Remote Press PR or the Number keys On the VCR Press PAUSE CH The channel display on the display panel starts blinking While the display is blinking press FF CH or REW CH to select channel After about 5 seconds the channel display stops blinking NOTES You can select channel in the stop mode recording pause mode or during rewind fast forward high speed search f no cassette is loaded or during recording pause mode you can select channel only by pressing FF CH or REW CH f you connect the TV and the VCR only using the RF connection press TV VCR on the Remote so that the VCR mode indicator lights on the display panel to view the program to be recorded Set tape speed Press SP EP 4 47 E1 Start recording On the VCR press REC Or on the Remote while h
14. JVC LPT0673 001A COPYRIGHT 2002 VICTOR COMPANY OF JAPAN LTD Dear Customer Thank you for purchasing the JVC VHS video cassette recorder Before use please read the safety information and precautions to ensure safe use of your new VCR CAUTIONS WARNING DANGEROUS VOLTAGE INSIDE WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE The POWER button does not completely shut off mains power from the unit but switches operating current on and off O shows electrical power standby and shows ON This unit is produced to comply with Standard IEC 60065 POWER SYSTEM This set operates on voltage of AC 110 220V 50 60 Hz with automatic switching Use the conversion plug provided depending on the type of your AC WALL outlet IMPORTANT It may be unlawful to record or play back copyrighted material without the consent of the copyright owner VIDEO CASSETTE RECORDER HR S8009UM SVHS Super VHS ET ero INSTRUCTIONS Ve Printed in China 0402 MNV KPJ KBJ CAUTION m When you are not using the VCR for a long period of time it is recommended that you disconnect the power cord from the AC outlet m Dangerous voltage inside Refer internal servicing to qualified service personnel To prevent electric shock or fire hazard remove the power cord from the AC outlet prior to connecting or disconnecting any signal lead or aerial m Changes or modifi
15. Select EDIT when you are editing tapes After you finish editing the tapes select AUTO WE AUTO TIMER ON OFF When this function is set to ON The timer recording standby mode is automatically engaged when the VCR is turned off It is temporarily canceled when the VCR is turned on You do not have to press to engage or disengage the timer recording standby mode When this function is set to OFF You have to press to engage or disengage the timer recording standby mode Mi SUPERIMPOSE ON OFF When this function is set to ON various VCR status information on screen display appears on the screen NOTE When you use this VCR as the playback VCR for editing a tape be sure to set this function to OFF otherwise the VCR status information on screen display will be recorded on the edited tape WE AUTO SP EP TIMER ON OFF When this function is set to ON the VCR automatically switches to EP mode to allow complete recording if there is not enough tape to record the entire program while timer recording in SP mode For Example Recording a program of 140 minutes in length onto a 120 minute tape Approximately 110 minutes Approximately 30 minutes NOTES f you have programed the VCR to timer record 2 or more programs do not use this function but change the tape speed manually during timer programing There may be some noise and sound disturbance where the tape
16. bar arrow to your desired language ENGLISH or ESPANOL then press OK or gt LANGUAGE SELECT gt ENGLISH ESPANOL PRESS a v THEN 0K PRESS MENU TO END The Clock Set screen appears EJ Set time Press V to set the hour then press OK or gt CLOCK SET SIME DATE YEAR AM 1 1 02 7 Press and hold either button to delay or advance the time by 30 minutes ZY Set date Press AV to set the date then press OK or gt Press and hold either button to change the date by 15 days El Set year Press AV to set the year EJ Start auto channel set Press MENU Receivable channels in your area are automatically assigned to the CH or PR buttons and non receivable channels are skipped If the tuner channels have been set PRESS 4 v THEN OK PRESS MENU TO END AUTO CHANNEL SET SCANNING PRESS MENU TO END properly SCAN COMPLETED will be displayed on the screen If SCAN COMPLETED NO SIGNAL is displayed on the screen make sure that the antenna cable is connected to the VCR properly and press OK or gt on the Remote The VCR will try Auto Channel Set again Return to normal screen Press MENU Language Setting Use language setting only if the language have not been set correctly by the Plug amp Play setting The default setting is ESPANOL EE Access Main Menu screen then Initial Set screen Press MENU on the Remote Press AV to move
17. cations not approved by JVC could void user s authority to operate the equipment Caution on Replaceable lithium battery The battery used in this device may present a fire or chemical burn hazard if mistreated Do not recharge disassemble heat above 100 C or incinerate Replace battery with Panasonic Matsushita Electric Sanyo Sony or Maxell CR2025 Danger of explosion or Risk of fire if the battery is incorrectly replaced m Dispose of used battery promptly m Keep away from children m Do not disassemble and do not dispose of in fire SVHS Cassettes marked S VHS and VHS can be used with this video cassette recorder However S VHS recordings are possible only with cassettes marked S VHS By using S VHS ET it is possible to record and play back with S VHS picture quality on VHS cassettes with this VCR When the equipment is installed in a cabinet or a shelf make sure that it has sufficient space on all sides to allow for ventilation 10 cm or more on both sides on top and at the rear When discarding batteries environmental problems must be considered and the local rules or laws governing the disposal of these batteries must be followed strictly Failure to heed the following precautions may result in damage to the VCR Remote or video cassette 1 DO NOT place the VCR IN an environment prone to extreme temperatures or humidity in direct sunlight in a dusty environment
18. dio Input Output AC 110 V 220 V 50 Hz 60 Hz 18 W 3 0 W 5 C to 40 C 20 C to 60 C Horizontal only 435 mm x 94 mm x 247 mm 2 7 kg S VHS VHS NTSC standard 210 min with ST 210 video cassette 630 min with ST 210 video cassette NTSC type color signal and EIA monochrome signal 525 lines 60 fields DA 4 Double Azimuth head helical scan system 45 dB 230 lines 400 lines 70 Hz to 10 000 Hz 20 Hz to 20 000 Hz RCA connectors IN x 1 OUT x 1 S video connector OUT x 1 Pe TUNER Tuning system Channel coverage VHF UHF CATV RF output TIMER Clock reference Program capacity Memory backup time ACCESSORIES Provided accessories Frequency synthesized tuner Channels 2 13 Channels 14 69 113 Channels Channel 3 or 4 switchable preset to Channel 3 when shipped 75 ohms unbalanced Quartz 1 year programmable timer 8 programs Approx 6 months Estimated figure based on supplied fresh battery actual performance may differ RF cable Lithium battery CR2025 Infrared remote control unit AA battery x 2 Conversion plug S video cable 4 pin Specifications shown are for SP mode unless specified otherwise E amp O E Design and specifications subject to change without notice
19. e also by pressing PAUSE CH and then FF CH or REW CH on the VCR See step Min Basic Recording CF pg 9 EJ Select edit mode Set the edit mode to ON for the VCRs if such a mode is equipped On this VCR set PICTURE CONTROL to EDIT pg 12 El Start playback Press PLAY on the playback VCR EJ Start recording Press REC on the recording VCR Various connection for editing tapes The following three methods can be used for editing tapes VHS to S VHS editing VIDEO VIDEO connection Although the picture quality is inherently limited by the original VHS quality the edited tape has better picture quality than those made by VHS to VHS editing S VHS to VHS editing VIDEO VIDEO connection Since the original source is recorded in S VHS mode the edited tape has better picture quality than those made by VHS to VHS editing S VHS to S VHS S VIDEO connection Original picture quality of S VHS made can be duplicated with minimal picture degradation This is the best editing method you can use on S VHS VCRs PENN i aee Specifications GENERAL Power requirement Power consumption Power on Power off Temperature Operating Storage Operating position Dimensions WxHxD Weight Format Maximum recording time SP EP VIDEO AUDIO Signal system Recording Playback system Signal to noise ratio Horizontal resolution VHS S VHS Frequency range Normal audio Hi Fi au
20. earch Index codes are placed on the tape at the beginning of each recording when recording on this VCR BB While the tape is not running press lt or gt lt lt or BPI on the Remote to start search PA To access a recording of 2 to 9 index codes away press lt or gt lt lt or PP repeatedly until the correct number is displayed on the screen only if SUPERIMPOSE is set to ON I pg 12 Playback begins automatically when the desired recording is located Beginning of the Current Beginning of the current program positionon 2nd next program recorded the tape recorded Previous program recorded program 2nd next recorded Locating beginning of timer recordings Instant Review After ensuring that the VCR is turned off and that the timer mode is disengaged press REVIEW on the Remote The VCR turns on and rewinds to the index code indicating the beginning of the last timer recorded program then begins playback automatically You can access a program of 2 to 9 index codes away from the current position on the tape If for example you have 5 programs recorded and you want to watch the third one press REVIEW three times The Instant Review function will also operate if the VCR is turned on Skipping unwanted portions Skip Search Press 30 SEC amp on the Remote once to 4 times during playback Each press initiates a 30 second period of high speed playback up to
21. er keys to enter your cable box s or DBS receiver s brand code 3 Press OK and release CABLE SAT ro EJ Operate cable box or DBS receiver First press CABLE SAT to set the Remote to cable box or DBS receiver mode then press one of the following buttons POWER TV PR and the Number keys For some brands you must press ENTER after having pressed the Number keys to enter a channel number To change the cable box s or DBS receiver s channels press TV PR or the Number keys The PR button can be used to change the VCR s channels only CABLE BOX BRAND CODE ARCHER 01 05 17 CABLETENNA 01 17 CABLEVIEW 15 16 17 CITIZEN 15 16 17 CURTIS DIAMOND GC BRAND GEMINI GENERAL INSTRUMENTS HAMLIN 01 04 06 11 12 15 10 18 23 JASCO 15 01 04 06 11 12 15 6 JERROLD LG GOLDSTAR NOVAVISION OAK PANASONIC PULSER RCA REGAL REMBRANDT SAMSUNG 05 16 24 SCIENTIFIC ATLANTA 02 SIGMA 07 SL MARX 05 16 17 24 SPRUCER 13 14 STARGATE 05 15 16 17 24 TAIHAN DEHAN r TELEVIEW 05 16 24 TOCOM 01 04 16 UNIKA 01 17 UNIVERSAL 16 17 VIDEOWAY 03 09 ZENITH 03 09 DBS RECEIVER BRAND CODE JVC DISH Network ECHOSTAR DISH Network RCA DSS SKY SONY DSS Changing Remote Control Code This Remote is capable of transmitting two control codes one set to respond to A code control signals and another set to respond to B code contr
22. ess PROG to finish the timer program setting The program starting earlier or program with the lower program number will be recorded PR START STOP CH 1 8 00P 10 DATE 0 00 K x N oi S _e xxx N 3 11 1 00 125 25 4 9 00P 10 00 10 12 24 5 4 4 v THEN p PROG END PROGRAM 4 STOP gt 10 00PM CH 10 SP FA Cancel or change program setting To cancel a program press X CANCEL when the Program screen you do not want is shown To change a program press the appropriate button START STOP DATE PR and or SP EP 4 47 when the Program screen on which you want to make changes is shown then press OK If the overlap is not yet solved the conflicting programs will be shown on the Program check screen Repeat the above steps again START DAT 12 24 02 TUE PRESS CANCEL TO CANCEL PRESS OK TO CONFIRM PRESS PROG TO END a Other Functions Checking tape position When you change the VCR operation mode from the stop mode to fast forward or rewind mode or when you perform an Index Search or Instant Review the tape position indicator appears The position of F in relation to B Beginning or E End shows you where you are on the tape Set SUPERIMPOSE to ON pg 12 B E E REMAIN COUNT 1 00 1 23 45 Changing display information Each time you press the display panel show
23. her codes Depending on the type of unit some or all functions cannot be operated using this Remote t s not possible to operate a unit not equipped with a remote sensor It s not possible to set the Remote for both your cable box and a DBS receiver at the same time Once you have set the Remote to operate the unit you do not have to set it until you replace the batteries from the Remote TV Brand Setting EF Turn on TV Turn on the TV using the Power button on the TV or its Remote FA Set TV brand code Press and hold TV Press the Number keys to enter your TV s brand code Press OK and release TV The TV should turn off 3 Operate TV First press TV to set the Remote to TV mode then press one of the following buttons POWER TV VCR TV PR I TV Muting TV 1 Volume and the Number keys For some brands you must press ENTER after having pressed the Number keys to enter a channel number TV BRAND CODE TV BRAND CODE JVC PHILICO 05 09 17 CCE 03 PHILIPS GRADIENTE 02 11 12 16 RCA GRUNDIG 14 SANYO SAMSUNG eo ro LG GOLDSTAR 11 MITSUBISHI 08 SHARP NEC 16 SONY NOBLEX 18 PANASONIC 13 TOSHIBA Other Functions Cable Box or DBS Receiver Brand Setting GE Turn on cable box or DBS receiver Turn on the cable box or DBS receiver using the Power button on the unit or its Remote FA Enter brand code Press and hold CABLE SAT Press the Numb
24. ly to enter the start time stop time date or channel Press and hold START or STOP to increase the time in 30 minute intervals To set the tape speed press SP EP MM To timer record daily Monday Friday or weekly serials press DAILY M F Number key 8 or WEEKLY Number key 9 Pressing the button again makes the DAILY or WEEKLY display disappear Press OK or PROG If PROGRAM NOT COMPLETED PROGRAM OVERLAP PROGRAM 1 START STOP PRESS SP EP 8 DAILY 9 WEEKLY THEN 0K PRESS PROG TO END To use the VCR while it is in timer recording standby mode Press then press O I After you use the VCR press again to put the VCR into timer recording standby mode Checking canceling or changing program settings ET Disengage timer Press then press 0 1 When AUTO TIMER CF pg 12 is set to ON you do not have to press FA Access Program Check screen Press CHECK STOP CH PR START 1 8 00P 10 00 12 10 00A 11 30P PRESS CHECK TO NEXT Access Program screen PROGRAM 1 Press CHECK again Each time you press CHECK the next program s Program screen appears START STOP Soo EM 10 00 PM 12 24 02 EA gi PRESS CANCEL TO CANCEL PRESS CHECK TO NEXT E1 Cancel or change program setting To cancel a program press X CANCEL when the Program screen you do not want is shown To change a progra
25. m press the appropriate button START STOP DATE PR DAILY M F Number key 8 WEEKLY Number key 9 and or SP EP 4 47 when the Program screen on which you want to make changes is shown E Return to normal screen Press CHECK repeatedly until no Program screen is shown EJ Reengage timer recording standby mode Press The VCR turns off automatically and is displayed on the display panel When AUTO TIMER pg 12 is set to ON the timer recording standby mode automatically resumes when you turn off the VCR appears see Program overlap warning display pg 11 EY Press The VCR turns off automatically and is displayed on the display panel a FO Timer Recording Program overlap warning display If PROGRAM NOT COMPLETED PROGRAM OVERLAP appears you have another program overlapping the program you have just made The Program Check screen appears and conflicting programs will start blinking PR START STOP CH DATE 8 00P 10 00 12 10 00A 10 45 40 11 30P 1 00 125 9 00P 10 00 10 PROGRAM NOT COMPLETED PROGRAM OVERLAP 12 24 N oN o amp Oo amp 6 PS _ A V THEN p PROG END Example Program 1 you have just made and Program 4 overlap each other EE Select program to modify Press AV then press gt You can only select one of the overlapping programs If you do not mind this overlap pr
26. nts instruction manuals for connection and its operations EF Make connections Example 1 When another VCR is VHS VCR This VCR To AUDIO VIDEO IN To AUDIO VIDEO OUT When using this VCR as the recording VCR connect this VCR s AUDIO VIDEO IN When using this VCR as the playback VCR connect this VCR s AUDIO VIDEO OUT connectors to the audio video output connectors on another VCR connectors to the audio video input connectors on another VCR U U U To audio video output J J J Another VCR f another VCR is monaural connect this VCR s AUDIO L IN or OUT connector to the audio output or input connector on another VCR To audio video input Example 2 When another VCR is S VHS VCR and equipped with S VIDEO input connector This VCR for playback To AUDIO OUT t t T To S VIDEO OUT AL AL S video cable not supplied Audio cable not supplied H U U To audio video input J J J To S video input Another VCR for recording FA Load cassettes Insert the playback cassette into the playback VCR and the cassette to be recorded on into the recording VCR EJ Select input mode on recording VCR Select the correct external input on the recording VCR On this VCR when using this VCR as the recording VCR Select F 1 when connecting the other VCR to the audio video input connectors on the front panel Press AUX or CH on the Remote You can select the input mod
27. ol signals This Remote control is preset to send A code signals because your VCR is initially set to respond to A code signals You can easily modify your VCR and the Remote to respond to B code signals When using two JVC VCRs set two VCRs and their Remotes to different codes so that you can operate these VCRs separately ET Set remote control code for Remote Press and hold VCR Press the Number key 2 Press OK and release VCR The Remote now can transmit B code control signals FA Check remote control code for VCR Press and hold on the VCR for more than 5 seconds while the VCR is turned off The code currently set appears on the display panel EJ Change code for VCR Press any key on the Remote The VCR now responds to B code control signals To set the Remote and the VCR back to A code control signals repeat the same procedure as shown above except pressing the Number key 1 in step 2 of E eo ro To control two VCRs with the same Remote You can control two JVC VCRs by switching the remote control code for the Remote between A and B lt step I keeping two VCRs to different control codes To change only the remote control code for the Remote DO NOT perform steps and Ef J Editing You can use your VCR as the playback or recording VCR You can use a camcorder as the playback VCR and your VCR as the recording VCR Refer also to the other compone
28. olding REC press PLAY P During recording Pause recording Press PAUSE ID Press PLAY P gt to resume recording You can select channel in the recording pause mode Stop recording Press STOP W on the OR Press STOP EJECT W on Remote the VCR NOTE If the tape reaches its end during recording the recording stops and O and on the display panel blink Press STOP EJECT M 4 on the VCR to eject the cassette or press REW 4 lt on the Remote to rewind the tape Recording Features Specifying recording length Instant Timer Recording ITR During recording press REC on the VCR repeatedly until the recording length you want appears on the display panel The record indicator O on the display panel starts blinking Each time you press the button recording length increases in 30 minute intervals up to 6 hours The VCR shuts off after recording is finished To cancel an ITR press STOP MB on the Remote or STOP EJECT E amp on the VCR Watching one program while recording another During recording If you connect the TV and the VCR only using the RF connection lt gt pg 5 to view pictures from the VCR press TV VCR on the Remote so that VCR mode indicator goes off from the display panel The TV broadcast being recorded disappears If you are using the AV connection 7 pg 5 to view pictures from the VCR change the TV s input mode from AV to TV
29. or S VHS ET recordings On some tapes picture quality will not improve even if the S VHS ET function is used Check the recording quality before you start important recordings WE B E S T ON OFF When B E S T Biconditional Equalized Signal Tracking system is set to ON this VCR checks the condition of the tape in use during playback and recording and compensates to provide the highest possible pictures This takes place whenever you play back a tape or start recording after inserting a tape NOTE The VCR checks the tape condition for about 7 seconds then starts recording To make sure you record the desired scene or program completely perform the following steps 1 Press and hold PAUSE II and press REC After about 7 seconds the VCR re enters Record Pause mode Press PLAY B gt to start recording n gt E PICTURE CONTROL AUTO NORM EDIT SOFT SHARP This function helps you to adjust the playback picture quality according to your preference AUTO NORM Normally select this Picture quality is adjusted automatically When B E S T is OFF NORM will appear instead of AUTO EDIT Minimizes picture degradation during editing recording and playback SOFT Reduces image coarseness when viewing overplayed tapes containing much noise SHARP Clearer sharper edged picture when viewing images with much flat same colored surfaces such as cartoons NOTE
30. rminal on the rear of the VCR and the TV s antenna input terminal BE 2 eo AV Connection improves picture quality during tape playback If your TV is equipped with audio video input connectors Connect the antenna VCR and TV as shown in the illustration Connect an audio video cable between the AUDIO VIDEO OUT connectors on the rear of the VCR and the audio video input connectors on the TV Even if you are using audio video cables to connect your VCR to your TV you must also connect it using the RF cable This will ensure that you can record one show while watching another 2 S video Connection allows you to make the most of the S VHS picture performance If your TV is equipped with a S video input connector Perform RF Connection above Connect a S video cable between the S VIDEO OUT connector on the rear of the VCR and the S video input connector on the TV 3 Connect an audio cable between the AUDIO OUT connectors on the rear of the VCR and the audio input connectors on the TV i 2 E1 Connect VCR to power source Plug the AC power cord into an AC outlet EJ Set VCR channel The VCR channel is the channel on which you can watch the picture from the VCR on the TV when only using the RF connection When the VCR is turned off press STOP EJECT H amp on the VCR for more than 5 seconds CH3 appears on the display panel Press PR on
31. s the channel number and the clock time alternatively g You can change display in the stop recording or during rewind fast forward high speed search Eo When SUPERIMPOSE is set to ON C pg 12 and on the Remote is pressed time counter will appear on the TV screen To reset the time counter press 0000 on the Remote Timer warning display A warning appears on the TV screen to tell you that the timer recording is to start in 5 minutes if you are not in the timer recording standby mode at that time Press to put the VCR into timer recording standby mode To clear the display press X CANCEL on the Remote WARNING TIMER RECORDING TO START SOON CANCEL Tape Remaining Time Press to display the tape remaining time on the screen NOTES Set SUPERIMPOSE to ON pg 12 to display the indication on the screen Depending on the type of tape used the tape remaining time may not appear right away or is not correct may sometimes appear or the display may blink on occasion Other Functions Function settings You can use the other useful function settings on the Function Set screen EE Access Main Menu screen then Function Set screen Press MENU on the Remote Press V to move the highlight bar arrow to FUNCTION SET then press OK or P FA Select Function Press AV to move the highlight bar arrow
32. s you to make high quality video recordings with horizontal resolution of 400 lines comparing with the 230 lines of resolution of conventional VHS recordings To achieve the highest quality picture we recommended to record in S VHS mode But remember that a conventional VHS VCR without SQPB cannot play back S VHS tapes recorded in S VHS mode S VHS MODE setting does not affect recording on VHS tapes Recording on VHS tapes is always performed in VHS mode except when using S VHS ET mode t pg 12 Child Lock You can disable the VCR operations While the VCR is turned on press and hold POWER on the Remote for more than 10 seconds The VCR turns off CL appears for about 5 seconds on the display panel To release the child lock press and hold POWER on the Remote until the VCR turns on NOTES Pressing during timer recording unplugging the AC power cord or a power outage also releases the child lock When the child lock function is in use keep the Remote out of the children s reach Timer recording programs will be performed even if the child lock function activated Multi Brand Remote Control This Remote can control some functions of remote controllable TVs cable boxes or DBS Direct Broadcast Satellite receivers listed below Without setting you can control a JVC TV NOTES Some unit s brands have more than one code If the unit does not function with a specified code try ot
33. the Remote to select CH3 CH4 or CH OFF then press OK If Plug amp Play or Tuner setting has not previously been performed the Language Select screen appears and Plug amp Play takes place automatically The VCR channel is preset to CH3 Set to CH4 if CH3 is used for broadcasting in your area EJ Final preparation for use Turn on the VCR and the TV and select the VCR channel 3 or 4 or AV mode on the TV If you connect the TV and the VCR only using the RF connection press TV VCR on the Remote so that the VCR mode indicator lights on the display panel Installing Removing the lithium battery Be sure to connect the power plug to an AC outlet first before installing the lithium battery otherwise the battery s service life will be drastically shortened 1 Make sure that the power plug is connected to an AC outlet and turn off the VCR power Open the battery cover while pressing the release tab as illustrated Insert a lithium battery with the plus side up and push it in To remove the lithium battery press the latch downward using a pointed non metallic object then pull out the lithium battery 4 Close the battery cover until it clicks in place Initial Settings Plug amp Play Setting EE Perform Plug amp Play setup Press O I The Language Select screen appears PA Select language Press AV to move the highlight
34. to move the highlight bar arrow to TUNER SET then press OK or MAIN MENU FUNCTION SET gt TUNER SET INITIAL SET PRESS 4 THEN OK PRESS MENU TO END FA Access Manual Channel Set screen Press AV to move the highlight bar arrow to MANUAL CHANNEL SET then press OK or TUNER SET BAND AUTO CHANNEL SET MANUAL CHANNEL SET SELECT WITH 4 AND OK PRESS MENU TO END Add or skip desired channels To add channels 1 Press the Number keys on the Remote to input a channel number you want to add Press OK or gt to set to ADD Repeat 1 to 2 to add other channels Press MENU to return to normal screen To skip channels Press V or the Number keys to select a channel number you want to skip Press OK or gt to set to SKIP Repeat 1 and 2 to skip other channels Press MENU to return to normal screen MANUAL CHANNEL SET oor CH 45 ADD 4 gt PRESS NUMBER KEY 0 9 OR 4 THEN OK PRESS MENU TO END eo n gt eo n gt a Playback Basic Playback EE Load a cassette Make sure the window side is up the rear label side is facing you and the arrow on the front of the cassette is pointing towards the VCR Do not apply too much pressure when inserting The VCR turns on and the counter on the on screen display is reset automatically
35. to the function you want to set MAIN MENU FUNCTION SET TUNER SET INITIAL SET PRESS a v THEN OK PRESS MENU TO END FUNCTION S VHS ET B E S T PICTURE CONTROL AUTO TIMER SUPERIMPOSE AUTO SP gt EP TIMER NEXT PAGE PREVIOUS PAGE gt VIDEO STABILIZER OFF BLUE BACK ON 2ND AUDIO RECORD OFF HI FI ON gt ON AUTO OFF AUDIO MONITOR S VHS MODE ON OFF SELECT WITH 4 AND OK PRESS MENU TO END SELECT WITH 4 7 AND OK PRESS MENU TO END Change setting Press OK or gt The default setting is bold in the following table Press MENU to return to normal screen E S VHS ET ON OFF When this function is set to ON you can record on VHS cassettes with S VHS picture quality Tapes recorded using this function can be played back on most of S VHS VCR or VHS VCR equipped with the SQPB S VHS QUASI PLAYBACK function When this function is set to ON the S VHS indicator lights up on the display panel Before recording set B E S T to ON See below You cannot activate the S VHS ET function while recording timer recording or Instant Timer Recording t pg 9 or the B E S 1 function t See below is in progress The S VHS ET function does not work with S VHS cassettes To keep the highest quality recording and playback pictures over a long period of time S VHS recording on S VHS cassettes is recommended Use of high grade tapes is recommended f
36. ton sound changes HI FI Normally select this Hi Fi sound is played back HI FI L Sound on the left Hi Fi channel is played back HI FI R Sound on the right Hi Fi channel is played back NORM Sound on the normal track is played back NORM HI FI Both sounds on the Hi Fi track and normal track are mixed and played back NOTE The above indication appears when SUPERIMPOSE is set to ON pg 12 though the monitor sound changes in sequence Automatic operations after rewinding Next Function Memory The Next Function Memory tells the VCR what to do after rewinding is complete Ensure that the VCR is in stop mode For Automatic Playback Start Press REW ad then press PLAY P within 2 seconds For Automatic Power Off Press REW ad then press amp within 2 seconds For Automatic Timer Standby Press REW lt lt then press within 2 seconds NOTE It is not possible to select the Automatic Timer Standby function if the cassette s record safety tab is removed Playing back tape repeatedly 100 times Repeat Play During playback press and hold PLAY for more than 5 seconds The play indicator E gt on the display panel starts blinking slowly To stop playback press STOP MM on the Remote or STOP EJECT W 4 on the VCR NOTE Pressing PLAY REW lt lt 4 FF BB or PAUSE IB also cancels repeat playback Locating beginning of recordings Index S
Download Pdf Manuals
Related Search