Jasco 52651 Instruction Manual
Contents
1. Fluorescent CLOSETUIGHT Battery Operated e Add safety and security to any room e Ideal for cupboards closets attics basements storage sheds and garages e Requires 8 AA batteries e For indoor use only INSTALLING BATTERIES Slide battery cap off end of light and install 8 AA 1 5 volt batteries not included with polarity as shown on diagram on the fixture Replace cap IMPORTANT Different types of batteries or new and used batteries should not be mixed Exhausted batteries should be removed from the fixture and disposed of properly MOUNTING Your closet light can be mounted using the supplied adhesive back hook and loop mounting strips Note Hook and loop strips A should only be used on clean AA dry and smooth surfaces Do gt not use on unfinished wood or rough surfaces 1 Separate the supplied hook and loop mounting strips from each other placing the hook and loop sides Aa of the strips into two piles 2 Clean and dry surface before mounting Peel back paper and apply loop mounting strips to both ends and middle of the back of the closet light A light n 3 Apply the hook strips to the desired mounting location making sure they are the A same distance apart as those on the closet light 4 Press the closet light onto the mounting surface NOTE Allow one day for the adhesive backing to set before attempting to pul2. l closet light away from mounting surface Light can also be mounted using supplied screws TUBE REPLACEMENT 1 Remove end caps from light 2 Remove transparent lens cover 3 Twist the tube slightly in either direction to remove 4 Replace with 8 watt 12 T5 bulb 5 Replace tube cover and end caps CAUTION Do not turn on light with tube disconnected to avoid possible damage to solid state circuit N n Ia Batteries may leak harmful liquids or ignitable materials or explode causing injury or product damage e Do not mix old and new or other batte Replace all batteries atthe same time Replace fully discharged batteries immediately
Download Pdf Manuals
Related Search