Interact-TV DUCK HUNTER LAUNCH AND LOAD 44078 User's Manual
Contents
1. 3 Always keep your DUCK HUNTER LAUNCH amp LOAD toy in a cool dry place 4 Keep DUCK HUNTER LAUNCH amp LOAD toy away from pets and other household animals 5 Do not rest your DUCK HUNTER LAUNCH amp LOAD toy on any potential heat source such as electronic equipment or a radiator2. Start hunting the Duck by shooting a safe infrared beam at it every time you press the Infrared Blaster s Trigger You will need to reload the Infrared Blaster by sliding back and forth the Reload Pump after each shot It takes 3 direct hits to bring the Duck down IMPORTANT BATTERY INFORMATION Do not mix old and new batteries different types of batteries standard carbon zinc alkaline or rechargeable of different capacities Rechargeable batteries are only to be charged under adult supervision Please respect the correct polarity or Do not try to recharge non rechargeable batteries Do not throw batteries into the fire Replace all batteries of the same type brand at the same time The supply terminals are not to be short circuited Remove exhausted batteries from the toy Batteries should be replaced by adults Remove batteries if the toy is not going to be played with for some time Removable batteries are to be removed from the toy before they are charged The packaging should be kept since it contains important information INSTALLING BATTERIES The Duck has a built in non removable non replaceable rechargeable capacitor The charging mechanism is built into the Infrared Blaster and requires 3 AAA alkaline batteries sold separately Use only the supplied Charger built into the Infrared Blaster provided in this DUCK HUNTER LAUNCH amp LOAD package to charge the Duck DO NOT USE ANY OTHER SOURCE TO CHARGE THE DUCK Instal
3. The Duck will resume its flight right away Keep shooting the Duck with your Infrared Blaster by repeating steps 2 and 3 It is necessary to hit the Duck 3 times directly to bring it down Note it is necessary to reload the Infrared Blaster after each shot fired PLAYING AGAIN OR STORING YOUR TOY When the Duck has been shot down or has landed on its own you will need to recharge it before playing again It is NOT necessary to turn the Infrared Blaster OFF before recharging the Duck To recharge the Duck follow the steps outlined under the section CHARGING THE DUCK If you are finished playing make sure to turn the ON OFF switch on the Infrared Blaster to the OFF position for storing Do not worry about turning off the Duck as it has no On OFF switch It is best to remove the batteries from the Infrared Blaster if it will be stored for a longer period of time This will prolong the operational life of the Infrared Blaster and the batteries The Butt Stock can be removed from the Infrared Blaster for easier storage as described in the Section ASSEMBLING THE INFRARED BLASTER Please respect the below points to extend the operation life of your DUCK HUNTER LAUNCH amp LOAD toy during storage 1 Product may be damaged or performance may be adversely affected if your DUCK HUNTER LAUNCH amp LOAD toy is not properly stored 2 Never place any items on top of any components of the DUCK HUNTER LAUNCH amp LOAD toy
4. launched from the Infrared Blaster as a means of enhancing the game play and adding excitement to the hunt It is not possible to launch the Duck by hand or to use any other Duck or Ornithopter from the Hunter Series with the Launch amp Load Infrared Blaster Launching the Duck is a simple process as outlined below Please note the Duck does not have an ON OFF switch WARNING Do not aim or launch the Duck in the direction of anyone or any living thing In particular do not aim or launch the Duck in any person s face WARNING 1 Once you have fully charged your Duck you should adjust the direction of flight setting to the fly pattern of your choice This is done by pivoting the Directional Control Tab to the left center or to the right The Directional Control Tab is located at the dorsal upper rear end of the Duck s body and has the two main wings attached to it By pivoting the Directional Control Tab to the left the Duck will fly to the left and by pivoting the Directional Control Tab to the right the Duck will fly to the right When the Directional Control Tab is positioned in the center the Duck will fly straight The farther the Directional Control Tab is pivoted towards a certain side the more the Duck will bank towards that direction during its flight the directional control tab to the right the Duck will fly to the right DIRECTIONAL CONTROL TAB 2 Once the Duck s Directional Control Tab has been ad
5. PLEASE DO NOT RETURN THIS PRODUCT TO ANY RETAIL STORE For any questions or problems with this product please contact us at Email info interactivetoy com Phone Inside North America 1 416 444 6873 Outside North America 1 866 214 2220 Address Interactive Toy Concepts 17 Vulcan Street Toronto Ontario Canada M9V 1L3 www interactivetoy com REPLACING THE DUCK S MAIN WINGS You can replace the original wings on your Duck if they become damaged A new set of wings can be purchased by contacting Interactive Toy Concepts as outlined in this manual To replace the wings do the following 1 Make sure the Duck is not flapping its wings In other words shoot it down with the Infrared Blaster or allow it to expire the charge in its capacitor and finish flapping its wings 2 Gently disconnect the rear corner of the wing that is tethered to the body by a ball joint 3 The leading front edge of the wing is a thin carbon fiber rod Gently pull this rod out of the gear box mechanism housing at the front 4 Installation of the new wing is the reverse of the wing removal procedure with the following minor difference The carbon fiber rod has a slight notch cut into its end so that it will only fit properly into gear box mechanism housing one way Use caution when inserting the carbon fiber rod If it is not going in smoothly it is misaligned IMPORTANT SAFETY INFORMATION Do not modify your DUCK HUNTER LAUNCH amp LOAD toy Do no
6. UCK HUNTER LAUNCH amp LOAD toy indoors or outdoors It takes 3 direct hits from the Infrared Blaster to bring down the Duck It is possible to have a competitive game play with any number of multiple players or to practice solo target shooting accuracy A multiple player game play consists of counting the number of shots fired to bring down the Duck The person who fires the least amount of shots is the winner DUCK HUNTER Launch amp Load has been carefully packaged to avoid damage during shipping 1 Infra red Shooter PLEASE USE Portable Charger CAUTION WHEN UNPACKING DUCK HUNTER Flying Duck Start hunting your duck fast 1 Turn on the Infrared Blaster The switch is located on the bottom of the Infrared Blaster just ahead of the trigger 2 Slide the Reload Pump all the way back and release it to arm the Duck Launching Mechanism 3 Prepare your Duck for launching by mounting it on the blaster and sliding it into its groove 4 Press and hold the trigger for 15 seconds to charge the Duck WARNING Do not aim or launch the Duck in the direction of anyone or any living thing In particular do not aim or launch the Duck in any person s face WARNING 5 Aim the Infrared Blaster inthe direction you would like the Duck to fly It is best to aim the infrared blaster upwards Press the Launch Button on the left side of the Infrared Blaster to launch the Duck The Duck will start flapping its wings and fly away 6
7. ed by and distributed by Interactive Toy r Ltd Patent Information EU EP1958681 US US2008191100 Canada CA2607358 Aus AU2007231617 Products and colors may vary MADE IN CHINA Se INTER Ld ACTIVE ae INS 44078 110305 US INSTRUCTION MANUAL Congratulations on your urchase of the DUCK HUNTER AUNCH amp LOAD ACCORDING TO CALIFORNIA LAW FC WARNING Do not brandish or display this infrared shooter in public it may confuse people and may be a crime Police and others may think this infrared shooter is a firearm Do not change the coloration and markings to make it look more like a firearm That is dangerous and may be a crime The DUCK HUNTER LAUNCH amp LOAD is a revolutionary new toy that allows anyone to have the virtual learning experience of hunting a Duck in complete safety The Infrared Blaster is equipped with a launch mechanism that is used to charge and launch a fully functional flying Ornithopter Duck into the air An Ornithopter is a device that flies by flapping its wings Thus the Ornithopter Duck s flying pattern is very life like The Infrared Blaster then uses a safe narrow infrared beam to shoot down the Duck The Duck will fly for up to 30 40 seconds from a 15 second charge The body of the Duck is made of an ultra light and flexible foam which provides excellent structure and resistance to damage Since the flying direction of the Duck can be preset it is possible to play with the D
8. justed to your flight direction preference as outlined above it is ready to be launched so that the hunt can begin 3 Aim the Infrared Blaster in the direction you would like to launch the Duck 4 Press the Launch Button located on the left side of the Infrared Blaster ahead of the Reload Pump 5 The Duck will be launched immediately and it will take flight by flapping its wings It is time to hunt the Duck down Avoid operating your DUCK HUNTER LAUNCH amp LOAD near power lines trees or roof tops If flying your Duck indoors the area should be roughly 16 x 16 5m x 5m and the standard household ceiling height HUNTING YOUR DUCK Once the Duck is in the air and flying it is your objective to shoot it down using the Infrared Blaster within its up to 30 to 40 second flight time window It takes 3 direct hits to bring down the Duck 1 Once the Duck is in the air it is fair game to be shot down using the Infrared Blaster 2 Reload the Infrared Blaster before firing at the Duck by sliding the Reload Pump backwards and forwards A reloading sound will be heard 3 Fire a safe infrared beam at the Duck by pressing the Infrared Blaster s trigger A shooting sound will be heard e If your shot misses the Duck the Duck will continue to fly in its pre determined path e If your shot hits the Duck it will stop operating for a brief moment and appear to fall This is meant to simulate a glancing blow to the Duck
9. l the batteries as shown 1 Open the battery compartment door located at the upper rear of the Shooter by using a Philips screwdriver not included 2 Insert the 3 AAA batteries according to the picture Ensure that the and polarities match the illustrations inside the battery compartment CHARGING THE DUCK HUNTER 3 Replace the battery compartment door and tighten screwdriver Do not over tighten the screw using the The Duck requires 10 seconds of charging time for a flight time of up to 30 to 40 seconds Charging the Duck is a simple process as outlined in the following steps 1 Turn the Infrared Blaster s ON OFF switch to the ON position for charging The ON OFF switch is located on the bottom of the Infrared Blaster ahead of the Trigger 4 Press and hold the Trigger for 15 seconds to charge the duck The Green LED located at the top of the Infrared Blaster ahead of the Butt Stock will light up during charging 2 Slide the Reload Pump backwards and release it to arm the Duck Launching Mechanism P Launch Button LED Light Green LED Charge Light The Green LED Charge Light will light up during charging 5 Release the Trigger Charge Button after 15 seconds of charging the Duck The Green LED will turn off The Duck is now ready for launching WARNING DO NOT CHARGE FOR LONGER THAN 15 SECONDS DAMAGE MAY OCCUR TO THE CAPACITOR INSIDE THE DUCK 3 Locate the Slot
10. t use in strong winds use only in VERY mild conditions Do not use in rain snow or around heavy debris Do not use near electrical lines Do not use around smoke or flames Do not use around water Do not use around electricity Do not use in crowded areas Do not use around air conditioning Do not use around air vents Do not use around ceiling fans Do not use around large obstacles Do not use in very small spaces Do be conscious of changes in your area Any changes or modifications to this product are strictly prohibited and will void product warranty Keep moving wings away from eyes hands hair and loose clothing Always turn off your Infrared Blaster when not in use Always remove batteries from Infrared Blaster during storage Always replace Infrared Blaster with NEW alkaline batteries for optimal performance Keep your instruction manual in a safe place for future use Only use the provided Infrared Blaster included with the DUCK HUNTER LAUNCH amp LOAD to charge the capacitor installed in the DUCK HUNTER LAUNCH amp LOAD Limited 30 day warranty Product is warranted by Interactive Toy Concepts Limited against manufacturing defects in material and workmanship under normal use for 30 days from the date of purchase Warranty is validated upon receipt of proof or purchase and confirmation of UPC code Duck Hunter and Hunter Series are i ath trademarks of Interactive Toy Concepts 2011 All Rights Reserved Manufactur
11. ted Charge Grooves on the bottom side of the Duck and the matching Slotted Charge Grooves on the top of the Infrared Blaster Match the connections by positioning the Duck ahead of the Infrared Blaster s slotted charge grooves and sliding the Duck backwards into its charging and launching position The Duck will sit on the Infrared Blaster snugly ASSEMBLING THE BLASTER The Infrared Blaster requires minimum assembly By mounting the Butt Stock onto the Infrared Blaster the ergonomics of the toy will be greatly improved Removing the Butt Stock from the Infrared Blaster may improve its storage when not in use Follow these simple steps to assemble the Infrared Blaster 1 Locate the Main Housing of the Infrared Blaster as well as the Butt Stock in the package 2 Slide the Butt Stock onto the Main Housing of the Infrared Blaster until it clicks into position The Butt Stock will only fit one way Note To remove the Butt Stock from the Infrared Blaster for storage purposes simply press the two tabs on either side of the Butt Stock that have the text PUSH molded into them and slide the Butt Stock off CHOOSING YOUR FLYING LOCATION Do not fly your Duck during windy conditions or harsh weather You can operate your DUCK HUNTER LAUNCH amp LOAD toy indoors or outdoors The outdoor space should be roughly 32 x 32 10m x 10m with a height allowance of about 19 6m LAUNCHING THE DUCK The Duck is capable of being
Download Pdf Manuals
Related Search