IBM C50 User's Manual
Contents
1. caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment Unauthorized changes or modifications could void the user s authority to operate the equipment This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Power Cords For your safety IBM provides a power cord with a grounded attachment plug to use with this IBM product To avoid electrical shock always use the power cord and plug with a properly grounded power outlet IBM power cords used in the United States and Canada are listed by the Underwriters Laboratories UL and certified by the Canadian Standards Association CSA For units intended to be operated at 115 volts Use a UL listed and CSA certified cord set consisting of a minimum 18 AWG type SVT or SJT three conductor cord a maximum of 4 5 metres 15 feet in length and a parallel blade grounding type attachment plug rated 15 amperes 125 volts For units intended to be operated at 230 volts U S use Use a UL listed and CSA certified cord set consisting of a minimum 18 AWG type SVT or SJT three conductor cord a maximum of 4 5 metres 15 feet in length and a tandem blade grounding type attachment plug rated 15 amperes 250 vol2. AGAINST YOU FOR LOSSES OR DAMAGES OTHER THAN THOSE UNDER THE FIRST ITEM LISTED ABOVE 2 LOSS OF OR DAMAGE TO YOUR RECORDS OR DATA OR 3 SPECIAL INCIDENTAL OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES INCLUDING LOST PROFITS OR SAVINGS EVEN IF IBM OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU For European warranty terms and conditions refer to enclosed IBM warranty statement Part Number 72H9622 R f rez vous a la garantie IBM N de r f rence 72H9622 pour les conditions de garantie europ ennes Die europ ischen Garantiebedingungen finden Sie in der beigef gten IBM Gewahrleistungserklarung Teilenummer 72H9622 Los t rminos y condiciones de las garant as en Europa se recogen en la declaraci n de garant a adjunta del n mero de pieza IBM 72H9622 Per le condizioni e i termini di garanzia relativi ai paesi europei consultare l apposita dichiarazione IBM numero di matricola 72H9622 Garantivillkorea framg r av den bilogade garantihandlingen IBM warranty statement med artikelnummer 72H9622
3. VESA Suspend Steady Yellow Blank Press a key or move the mouse Energy Star VESA Off Steady Amber Blank Press a key or move the mouse NUTEK There may be a slight delay before the picture returns 10 Specifications The C50 M T 2235 color monitor uses a 15 inch CRT with a viewable image size of 13 7 inches 348 mm 14 6 inch 370 mm VESA DDC 1 2B 16 5 inch 419 mm 15 1 inch SN Synchronization Horiz Frequency 30 kHz 54 kHz Tilt Swivel Forward tilt 5 Power Normal Operation Backward tilt 13 Consumption VESA Standby Swivel 90 Typical VESA Suspend VESA Off ENGLISH Maximum Height 8 3 inch 210 mm Maximum Width 11 0 inch 280 mm Operating Temperature 10 to 35 C Dot Pitch 0 28 mm Storage Temperature 1 to 60 C Shipping Temperature 20 to 60 C Power input Supply Voltage 100 240 Vac 50 60 Hz Operating Humidity 20 to 80 Max Supply Current 1 5A at 100 Vac Storage Humidity Shipping Humidity 20 to 80 Video input Input Signal Analogue Direct 20 to 90 Drive 75 ohm 0 0 7v Horiz Addressability 1024 pels max Vert Addressability 768 lines max Clock Rate 65 Mpels sec Emissions MPR II 11 Troubleshooting If you have a problem setting up or using your monitor you may be able to solve it yourself Before calling your retailer or IBM you should try the suggested actions that are appropriate to your problem Possible Cause Suggested Action S
4. contrast between foreground and background Primary Controls If the LED indicator is lit press shift button to turn it off Press the control button once to select the primary function then press the ENGLISH and buttons to adjust Effect of Control Description Function essi DEE GE Horizontal AZ pi Moves image left or right Position Horizontal Size BS AZ Adjusts image width tl De Moves image up or down Position ge Up a EU Secondary controls Control buttons amp and have dual functions U7 TT and e To make adjustments to the secondary controls press shift button 4 The LED indicator will light up to show secondary controls are active To revert back to primary controls amp 0 press shift button again and the LED indicator will go off To adjust secondary controls 1 Press shift button to select secondary controls 2 Press control button you wish to adjust 3 Press and buttons to adjust the image Function Ener or conto Description VI Trapezoid una Equalizes the length of the top and bottom edges pl IT Side Pincushion Adjusts the amount of curvature on the vertical edges Memory Recall Recalls the preset image settings if operating in any one of the factory set display modes see Table 1 on page 9 Further information ENGLISH Display modes Addressabilit Refresh Horizontal The display mode the m
5. of the monitor until the latch 3 clicks into the locked position Connecting your monitor 1 Connect the signal cable to your computer figure A Your computer may have a video adapter card installed In this case attach the signal cable to the connector on the video adapter card figure B 2 Connect the power cord to the monitor first then firmly insert the plug into a properly grounded electrical outlet 3 Turn on the monitor and then the computer If your monitor does not seem to be working correctly refer to the Troubleshooting section on page 12 for help E CU l Z m Workplace preparation This section gives advice on the things that you should consider before you set up your monitor Positioning the Monitor Choose a suitable place to position the monitor where it is not near fluorescent desk lighting or any equipment that produces magnetic fields that could cause interference Ensure that the furniture or equipment can support the weight of the monitor Allow at least 2 inches 50mm ventilation space around the monitor Height The monitor should be positioned so that the top of the screen is slightly below your eye level when you sit at your workstation Orientation Choose a position that gives the least reflection from lights and windows usually at a right angle to any windows The monitor should be positioned directly in front of you so that you do not have to twist your b
6. Color MORI Monitor Couleur Farbmoni pos Monitor en Color Monitor Alea User Guide Guide de l utiliseur Benutzerhandbuch Manual del usuario 0 Manuale per l utente C 5 Edition 1 This publication could contain technical inaccuracies or typographical errors Changes are made periodically to the information herein these changes will be made in later editions IBM may make improvements and or changes in the product s and or program s at any time It is possible that this publication may contain reference to or information about IBM products machines and programs programming or services that are not announced in your country Requests for copies of this publication and for technical information about IBM products should be made to your IBM Authorized Dealer or IBM Retailer No part of this publication may be reproduced or distributed in any form or by any means without prior permission in writing from the International Business Machines Corporation References in this publication to IBM products programs or services do not imply that IBM intends to make these available in all countries in which IBM operates Any reference to an IBM product program or service is not intended to state or imply that only IBM s product program or service may be used Any functionally equivalent product program or service that does not infringe any of IBM s intellectual property rights or other legally protectable rights may be used i
7. ansactions involve the removal of parts and their return to IBM You represent that all removed parts are genuine and unaltered A part that replaces a removed part will assume the warranty service status of the replaced part If a Machine does not function as warranted during the warranty period IBM or your reseller will repair it or replace it with one that is at least functionally equivalent without charge The replacement may not be new but will be in good working order If IBM or your reseller is unable to repair or replace the Machine you may return it to your place of purchase and your money will be refunded If you transfer a Machine to another user warranty service is available to that user for the remainder of the warranty period You should give your proof of purchase and this Statement to that user However for Machines which have a life time warranty this warranty is not transferable Warranty Service To obtain warranty service for the Machine you should contact your reseller or call IBM In the United States call IBM at 1 800 772 2227 In Canada call IBM at 1 800 565 3344 You may be required to present proof of purchase IBM or your reseller will provide certain types of repair and exchange service either at your location or at IBM s or your reseller s service center to restore a Machine to good working order When a type of service involves the exchange of a Machine or part the item IBM or your reseller replaces becomes i
8. creen is blank and No power to monitor Ensure the electrical outlet and the Setup section power indicator is off monitor are both switched on starting on page 2 Check power cord is firmly plugged into the monitor and the electrical outlet If the power cord plug has a removable fuse replace it Try another power cord Try another electrical outlet Screen is blank and Brightness and Contrast Adjust brightness and contrast User controls section power indicator is may be too low starting on page 5 steady green Further information Display mode of the Reconfigure the computer to use a section starting on computer is outside supported display mode page 9 the range of the monitor No video signal from the Check the signal cable is firmly connected computer to the computer Check no pins are bent in the signal cable connector Screen is blank and power indicator is steady yellow or steady amber Image appears to be flickering Image appears to be discolored The monitor is in Power Management Standby Suspend or Off state No video signal from the computer The monitor is operating in an interlaced or low refresh rate display mode The monitor may be affected by interference from nearby equipment The monitor may be affected by interference from nearby equipment Magnetization of monitor components has built up Press any key on the keyboard or move the mouse to restore operation Check t
9. erre doivent tre utilis s pour r duire les risques d interf rence avec des communications radio et t l vis es ainsi qu avec des quipements lectriques ou lectroniques Ces cables et connecteurs sont disponibles aupr s de vos revendeurs IBM agr s Conform ment a la norme EN 50082 1 1992 Performance Criterion A veuillez noter qu en pr sence de certains champs lectromagn tiques limage de l cran peut tre instable Erkl rung f r die Europ ische Union EU Dieses Produkt wurde getestet und dabei wurde festgestellt daB es gemaB CISPR 22 Europ ische Norm EN 55022 die Grenzwerte f r Ausr stung der Informationstechnik Klasse B einh lt Die Grenzwerte f r Ausr stung der Klasse B wurden fur eine typische Wohnumgebung erarbeitet um einen angemessenen Schutz vor St rungen im Zusammenhang mit zugelassenen Kommunikationsger ten zu gew hrleisten Es sind ordnungsgemaB abgeschirmte und geerdete Kabel und Stecker zu verwenden um das St rungspotential in bezug auf Radio und Fernsehempfang oder andere elektrische oder elektronische Ger te zu reduzieren Solche Kabel und Stecker sind bei autorisierten IBM Fachh ndlern erhaltlich In bereinstimmung mit EN 50082 1 1992 Leistungskriterium A wird darauf hingewiesen daB bestimmte elektromagnetische Felder ein Flattern auf dem Bildschirm hervorrufen k nnen Declaraci n de la Uni n Europea UE Este producto ha sido probado y cumple con las limitac
10. ettrici o elettronici cavi sono disponibili presso i rivenditori autorizzati IBM In accordo con quanto previsto nel documento EN 50082 1 1992 Performance Criterion A importante sottolineare che in presenza di determinati campi elettromagnetici possibile che si verifichi un certo tremolio delle immagini Europeiska unionen EU Denna produkt har testats och f ljer gr nsv rdena f r Klass B Information Technology Equipment enligt CISPR 22 Europeisk standard EN55022 Gr nsv rden f r Klass B utrustning utg r fran vanliga bostadsomr den f r att ge ett rimligt skydd mot st mingar i kommunikationsenheter Korrekt avsk rmade och jordade kablar och kontakter m te anv ndas f r att minska risken f r st rningar i kommunikationsenheter TV kommunikationer och annan elekstrisk utustning S dana kablar och kontakter finns tillg ngliga hos auktoriserade IBM terf rs ljare enlighet med EN 50082 1 1992 Performance Criterion A p pekas f ljande n rheten av en del elektromagnetiska f lt kan vissa bildst mingar uppst r p sk rmen Statement of Limited Warranty The warranties provided by IBM in this Statement of Limited Warranty apply only to Machines you originally purchase for your use and not for resale from IBM or your reseller The term Machine means an IBM machine its features conversions upgrades elements or accessories or any combination of them Unless IBM specifies otherwise the
11. following warranties apply only in the country where you acquire the Machine If you have any questions contact IBM or your reseller Machine M T 2235 Warranty Period 1 year Contact your place of purchase for warranty service information Production Status Each Machine is manufactured from new parts or new and used parts In some cases the Machine may not be new and may have been previously installed Regardless of the Machine s production status IBM s warranty terms apply The IBM Warranty for Machines IBM warrants that each Machine 1 is free from defects in materials and workmanship and 2 conforms to IBM s Official Published Specifications The warranty period for a Machine is a specified fixed period commencing on its Date of Installation The date on your receipt is the Date of Installation unless IBM or your reseller informs you otherwise During the warranty period IBM or your reseller if authorized by IBM will provide warranty service under the type of service designated for the Machine and will manage and install engineering changes that apply to the Machine For IBM or your reseller to provide warranty service for a feature conversion or upgrade IBM or your reseller may require that the Machine on which it is installed be 1 for certain Machines the designated serial numbered Machine and 2 at an engineering change level compatible with the feature conversion Warranty or upgrade Many of these tr
12. he computer is powered on Check the signal cable is firmly connected to the computer Check no pins are bent in the signal cable connector Reconfigure the computer to use a non interlaced display mode with a refresh rate of at least 72 Hz Further information section starting on page Move fluorescent desk lighting or any equipment that produces magnetic fields further away from the monitor If another monitor is close by a separa tion distance of at least 12 inches 300mm is recommended Move any equipment that produces magnetic fields e g sub woofer loud speakers further away from the monitor Degauss the monitor by switching it off and on again after 20 minutes ENGLISH Further help If you are unable to correct the problem yourself you may seek further help as follows Call IBM HELPCENTER In the US call 1 800 772 2227 In Canada call 1 800 565 3344 In other countries contact your dealer retailer or other IBM authorized servicer 14 Before calling please have available as much of the following information as possible 1 ONDAN Model and serial number from the label on the back of your monitor Purchase receipt Description of problem Computer type and model System configuration hardware fitted etc System BIOS version number Operating System and version number Display driver version number If possible stay by your computer system Your technical support representat
13. iones estipuladas para la Clase B ITE Information Technology Equipment de conformidad con CISPR 22 Est ndar Europeo EN 55022 Las limitaciones de los equipos de Clase B se establecieron para que los entornos residenciales t picos a fin de proporcionar una protecci n razonable contra interferencias con dispositivos de comunicaci n autorizados Se deben utilizar conectores y cables debidamente protegidos y conectados a tierra a fin de reducir las posibilidades de que se produzcan interferencias con comunicaciones por radio o televisi n y otros equipos el ctricos o electr nicos Este tipo de cables y conectores pueden adquirirse en concesionarios autorizados de IBM De acuerdo con la norma EN 50082 1 1992 Performance Criterion A habr a que destacar que en presencia de determinados campos electromagn ticos podr a observarse una marcada inestabilidad e la imagen Dichiarazione di conformit dell Unione Europea UE Questo prodotto stato collaudato e trovato conforme ai limiti di Classe B relativi agli apparecchi informatici secondo quanto dispone la normativa europea CISPR 22 EN 55022 limiti degli apparecchi di Classe B sono stati definiti per i normali ambienti domestici al fine di fornire un adeguata protezione con dispositivi di comunicazione autorizzati Utilizzare cavi e connettori collegati a terra per ridurre il rischio potenziale di interferenza delle comunicazioni radiotelevisive e di altri apparecchi el
14. ive might want to go through the problem with you during the call Compliances Federal Communications Commission FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorientate or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult an IBM authorized dealer or service representative for help Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits Proper cables and connectors are available from IBM authorized dealers IBM is not responsible for any radio or television interference
15. nstead of the IBM product program or service Evaluation and verification of operation in conjunction with other products programs or services except those expressly designated by IBM are the user s responsibility IBM may have patents or pending patent applications covering subject matter in this document The furnishing of this document does not give you any license to these patents Trademarks The following terms used in this publication are trademarks or service marks of the IBM Corporation in the United States or other countries IBM HelpCenter Copyright International Business Machines Corporation 1997 All rights reserved Contents Content s cc scri 1 A 2 User controls 5 Further information 9 Specifications 11 Troubleshooting 12 Compliances A1 Warranty eeEEK AS innere A2 ENGLISH Setup Important Before connecting the monitor turn off the computer and attached devices Also ensure the power at the electrical outlet matches the power requirements of the monitor Refer to the Specifications section on page 11 for more details Attaching the Stand The tilt swivel stand is fitted as follows 1 Place the monitor face down on a soft surface to prevent the screen being scratched 2 Insert the hooks 1 into the matching slots on the underside of the monitor 2 3 Slide the base towards the front
16. ody Tilt the monitor to a comfortable viewing angle Working Practices Rest Take regular breaks Vary your posture and stand up and stretch occasionally as prolonged use of computer workstations can be tiring Back You should sit back in the chair and use the back rest Hands Use a light touch on the keyboard keeping your hands and fingers relaxed Allow a space in front of the keyboard to rest your wrists when not typing Consider using a wristpad Eyesight Working with monitors in common with any prolonged close work can be visually demanding Look away from the screen periodically and have your eyesight checked regularly Screen settings Set the screen brightness and contrast to a comfortable level You may have to adjust this as the lighting changes during the day Many application programs let you select colour combina tions which can help you to view in comfort User controls The image is already optimised for many display modes However the controls can be used to adjust the image to your liking 0 000000 0 0 ENGLISH EE e Co fe CO f E Brightness and Contrast These functions are adjusted directly using the rotary controls Press the control and it will pop out so that it can be rotated Press again to return the control flush to the bezel Effect of Control Description ES 225 LI Brightness Bia xs Adjusts background brightness O Contrast D DI Adjusts
17. onitor uses is controlled by the y Rat F computer Therefore you should refer to your computer ate requency documentation for details on how to change display modes 720 x 400 31 5 kHz The image size position and shape may change when the 640 x 480 31 5 kHz display mode changes This is normal and the image can be readjusted using the monitor controls 640 x 480 37 9 kHz 640 x 480 37 5 kHz To ensure flicker free operation select the highest non interlaced refresh rate both the computer and the monitor 640x480 ee can support generally 72 Hz or higher for the 800 x 600 46 9 kHz addressability that your application requires 800 x 600 53 7 kHz For the display modes listed below the screen image has 1024 x 768 48 4 kHz been optimised during manufacture Table 1 Factory Set Display Modes Power Management To benefit from power management the monitor must be used As an Energy Star Partner IBM has determined that this in conjunction with a computer that implements the Video product meets Energy Star guidelines for energy efficiency Electronics Standards Association VESA Display Power Management Signalling DPMS Standard The power management feature is invoked when the computer recognizes that you have not used your mouse or keyboard for a user definable period of time There are several states as described in the table below FE en nn Steady Green Normal VESA Standby Steady Yellow Blank Press a key or move the mouse
18. r parts identification labels or failure caused by a product for which IBM is not responsible THESE WARRANTIES REPLACE ALL OTHER WARRANTIES OR CONDITIONS EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THESE WARRANTIES GIVE YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM JURISDICTION TO JURISDICTION SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF EXPRESS OR IMPLIED WARRANTIES SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU IN THAT EVENT SUCH WARRANTIES ARE LIMITED IN DURATION TO THE WARRANTY PERIOD NO WARRANTIES APPLY AFTER THAT PERIOD Limitation of Liability Circumstances may arise where because of a default on IBM s part or other liability you are entitled to recover damages from IBM In each such instance regardless of the basis on which you are entitled to claim damages from IBM including fundamental breach negligence misrepresentation or other contract or tort claim IBM is liable only for 1 damages for bodily injury including death and damage to real property and tangible personal property and 2 the amount of any other actual direct damages or loss up to the greater of U S 100 000 or the charges if recurring 12 months charges apply for the Machine that is the subject of the claim UNDER NO CIRCUMSTANCES IS IBM LIABLE FOR ANY OF THE FOLLOWING 1 THIRD PARTY CLAIMS
19. ren Farblinien f r Rot Gr n und Blau bei z B der Darstellung eines Buchstabens zur Deckung Konvergenz gelangen Siehe hierzu auch die Erkl rungen zu H STAT und V STAT European Union EU Statement This product has been tested and found to comply with the limits for Class B Information Technology Equipment according to CISPR 22 European Standard EN 55022 The limits for Class B equipment were derived for typical residential environments to provide reasonable protection against interference with licensed communication devices Properly shielded and grounded cables and connectors must be used in order to reduce the potential for causing interference to radio and TV communications and to other electrical or electronic equipment Such cables and connectors are available from IBM authorised dealers In accordance with EN 50082 1 1992 Performance Criterion A it should be noted that in the presence of certain electromagnetic fields some screen jitter may be observed Sp cifications de la CEE Ce produit a t test et d clar conforme aux limites de la Classe B d finies pour les quipements informatiques conform ment la norme europ enne CISPR 22 EN 55022 Les limites impos es aux quipements de Classe B visent garantir une protection raisonnable dans des environnements r sidentiels contre toute interf rence avec des quipements de communication agr s Des cables blind s et correctement reli s a la t
20. ts For units intended to be operated at 230 volts outside the U S Use a cord set with a grounding type attachment plug rated 13 amperes Minimum 250 volts The cord set should be marked lt HAR gt and have the appropriate safety approvals for the country in which the equipment will be installed A As an ENERGY STAR Partner IBM Corporation has determined that this product meets the ENERGY STAR guidelines for energy efficiency MPRII This product complies with Swedish National Council for Metrology MPR standards issued in December 1990 MPRII for very low frequency VLF and extremely low frequency ELF Hinweise GemaB der Amtsblatter des BMPT Nm 61 1991 und 6 1992 wird der Betreiber darauf aufmerksam gemacht daB die von ihm mit diesem Gerat zusammengestellte Anlage auch den technischen Bestimmungen dieser Amtsblatter gen gen muB Aus ergonomischen Griinden wird empfohlen die Grundfarbe Blau nicht auf dunklem Untergrund zu verwenden schlechte Erkennbarkeit Augenbelastung bei zu geringem Zeichenkontrast Aus ergonomischen Gr nden sollten nur Darstellungen auf dunklem Hintergrund bei Vertikalfrequenzen ab 60 Hz ohne Zeilensprung benutzt werden Die Konvergenz des Bildes kann sich auf Grund des Magnetfeldes am Ort der Aufstellung aus der korrekten Grundeinstellung ver ndern Zur Korrektur empfiehlt es sich deshalb die Regler an der Frontseite f r H STAT und V STAT so einzustellen daB die getrennt sichtba
21. ts property and the replacement becomes yours You represent that all removed items are genuine and unaltered The replacement may not be new but will be in good working order and at least functionally equivalent to the item replaced The replacement assumes the warranty service status of the replaced item Before IBM or your reseller exchanges a Machine or part you agree to remove all features parts options alterations and attachments not under warranty service You also agree to ensure that the Machine is free of any legal obligations or restrictions that prevent its exchange You agree to 1 obtain authorization from the owner to have IBM or your reseller service a Machine that you do not own and 2 where applicable before service is provided a follow the problem determination problem analysis and service request procedures that IBM or your reseller provide b secure all programs data and funds contained in a Machine and c inform IBM or your reseller of changes in a Machine s location IBM is responsible for loss of or damage to your Machine while it is 1 in IBM s possession or 2 in transit in those cases where IBM is responsible for the transportation charges Extent of Warranty IBM does not warrant uninterrupted or error free operation of a Machine The warranties may be voided by misuse accident modification unsuitable physical or operating environment improper maintenance by you removal or alteration of Machine o
Download Pdf Manuals
Related Search