Home
Hyundai IT DW12-BFM ME User's Manual
Contents
1. Lime Deposits or a White Film Form on the Dishes Have you checked whether the lid to the salt container is closed properly the rinse aid dosage is correct If despite all these checks the dishwasher still does not func tion and or the problem persists contact the nearest authorised service agent and provide them with the following information the nature of the problem the model type number Mod and the serial number S N which are indicated on the plate located on the side of the inner part of the door Never call on unauthorised technicians and refuse to allow parts to be installed that are not original spare parts Installation Positioning the Appliance Position the appliance in the desired location The back should rest against the wall behind it and the sides along the adjacent cabinets or wall The dishwasher is equipped with water supply and drain hoses that can be positioned to the right or the left to ensure correct installation Levelling the Appliance Once the appliance is positioned adjust the feet screwing them in or out to adjust the dishwasher making it level The appli ance should not be inclined more than 2 If the appliance is level it will help ensure proper performance Cold Water Connection Connect the cold water supply hose to a threaded 3 4 gas con nector and make sure that it is fastened tightly in place see fig 1 If the water pipes are new or have not been used f
2. 3 Heavy Duty B eZ Heavy Duty EN50242 Ct Normal Wash Cy eee Normal Wash AIN Rinse AN Rinse R N Rapid Wash R N Rapid Wash rany CA E E A Cycle Selection Information Very dirty dishes pots and pans Not to be used with delicate items Very dirty dishes pots and pans Not to be used with delicate items Normally dirty dishes pots and pans Standard daily cycle Normally dirty dishes pots and pans Standard daily cycle For dishes that need to be rinsed and dried only For dishes that need to be rinsed and dried only Economic fast cycle to be used to on not very dirty dishes right after they are used No drying cycle Economic fast cycle to be used to on not very dirty dishes right after they are used No drying cycle Pre wash of dishes pots and pans while waiting for the load to be completed after the subse quent meal Description of Deter Rinse Cycle gent Aid Pre wash with hot water Extended wash at 58 C Rinse with cold water Rinse with hot water Drying Pre wash with hot water Extended wash at 53 C Rinse with cold water Rinse with hot water Drying Extended wash at 58 C Rinse with cold water Rinse with hot water Drying Extended wash at 53 C Rinse with cold water Rinse with hot water Drying Rinse with cold water Rinse with hot water at 58 C Drying Rinse with cold water Rinse wit
3. it is open as this could over turn the dishwasher If the appliance malfunctions turn off water supply to the appli ance and disconnect the plug from the wall socket Then con sult the section entitled Troubleshooting If you cannot solve the problem contact a service centre Only specialised personnel are authorised to make repairs Appliances which are no longer being used must be made inoperable by cutting the power supply cord and removing the door lock If the supply cord is damaged it must be replaced by the manu facture its service agent of similarly qualified persons in order to avoid a hazard After installation the power plug must be accessible Fundamental rules to follow when using the appliance Never touch the dishwasher when barefoot or with wet hands or feet We discourage the use of extension cords and multiple sockets During installation the power supply cord must not be exces sively or dangerously bent or flattened If the appliance is not operating properly or maintenance must be performed disconnect the appliance from the power supply To maintain the EFFICIENCY and SAFETY of this appliance we recommend call only the Service Centers authorized by the manufacturer always use original Spare Parts i HYUNDAI e N N o G ON OFF Light B Eco Button C Half load Button D Low Salt Indicator Light E E Knob For Selecting Cycle F Handle For Opening Do
4. trapped inside Remove the Plug Before cleaning or performing maintenance always remove the plug from the socket No Solvents or Abrasive Cleaning Products To clean the exterior and rubber parts of the dishwasher do not use solvents or abrasive cleaning products Use only a cloth and warm soapy water To remove spots or stains from the surface of the interior use a cloth dampened with water and a little white vinegar or a clean ing product made specifically for dishwasher Use the right amount of detergent if you use too much detergent the result will not be cleaner dishes but rather a greater nega tive impact on the environment There is no advantage in rinsing dishes cookware and utensils before placing them in the dishwasher Moving the Appliance If the appliance must be moved try to keep it in the vertical position If absolutely necessary it can be positioned on its back Seals One of the factors that cause odors to form in the dishwasher is food that remains trapped in the seals Periodic cleaning with a sponge will prevent this from occurring When You Go on Holiday When you go on holiday it is recommended that you run a wash cycle with the dishwasher empty and then remove the plug from the socket turn off the water supply and leave the door of the appliance slightly ajar This will help the seals last longer and prevent odors from forming within the appliance Wash Cycle Table Cycle A Button
5. HYUNDAI Domestic Dishwasher DW12 BFM DW12 BFM ME Code 0120505275 Safety Is Very Important NOTICE Carefully read the instructions contained in this manual as they provide important information which is essential to safe and proper installation use and maintenance of the appliance This appliance complies with the following EEC directives 73 23 EEC of 19 February 1973 Low Voltage and subse quent modifications 89 336 EEC of 3 May 1989 Electromagnetic Compatibility and subsequent modifications Carefully dispose of the packing material After removing the packing check to make sure that the appli ance is not damaged If in doubt contact a qualified professional The dishwasher must only be used by adults for the washing of household dishes and cooking utensils The appliance is not intended for use by young children or inform persons without supervision Young children should be supervised to ensure that they do not play with the appliance Keep detergents out of the reach of children who must also be kept away from the dishwasher when it is open This appliance cannot be installed outdoors not even if the area in which it is installed is covered by a roof it is also very dangerous to leave it exposed to the rain and elements Do not touch the heating element during or after a wash cycle Close up View Control Panel DW12 BFM1 O A ON Q OFF Do not lean or sit on the door when
6. dditional cup rack can be swivelled in or out as required see fig C Lower Rack Upper Rack Turning on the Appliance Starting a wash cycle Make sure that the plug for the appliance is inserted into the wall socket Make sure that the water supply is turned on to full pressure Load the dishwasher see the section entitled Loading the Dishwasher Pour in the detergent see the section entitled Salt Detergent and Rinse Aid Turn the knob located on the right of the control panel in clockwise direction until the number or symbol for the cycle setting is aligned with the reference mark see the section entitled Wash Cycle Table Press the ON OFF button and the ON OFF light will turn on At this point the wash cycle will begin At the end of the wash cycle When the knob stops turning and is aligned with a STOP mark see figure the cycle has finished Turn off the appliance using the ON OFF button turn off the water supply and open the door of the dishwasher Wait a few minutes before unloading the dishwasher to avoid handling the dishes and utensils while they are still hot and more susceptible to breakage They will also dry better Wash Cycle Adjustment Buttons ECO Button This button see Close up View Control Panel letter B is used for normal dirty dishes pots and pans It is a standard daily cycle Cancelling or modifying a wash cycle setting A cycle that is under
7. es and lids on the sides of the racks in order to avoid blocking the rotation of the top spray arm Pots serving bowls etc must always be placed face down Deep pots should be slanted to allow the water to flow out The silverware basket can be doubled see fig A so that only one section may be used when the silverware load is light This also makes space for additional pots and pans and it can also be placed in the upper rack Silverware should be placed in the silverware basket with the handles at the bottom if the rack has side baskets the spoons should be located individually into the appropriate slots Espe cially long utensils should be placed in the horizontal position at the front of the upper rack How to use the upper rack The upper rack is designed to hold more delicate and lighter dishware such as glasses cups and saucers plates small bowls and shallow pans as long as they are not too dirty Position the dishes and cookware so that they do not get moved by the spray of water The upper rack can be adjusted for height by using the knobs located on both sides of the rack itself see fig B Adjust the upper basket to the higher level and you have more space to accommodate those taller pans and trays in the bottom basket Shelf Lean tall glasses and those with long stems against the shelf not against other items to be washed Place glasses cups and small bowls on the additional cup rack The a
8. ess steel inner door of the appliance and that the electrical system is sized for the maximum voltage on the rating plate insert the plug into an electrical socket which is earthed properly the earthing of the appliance is a safety re quirement mandated by law If the electrical socket to which the appliance must be connected is not appropriate for the plug replace the plug rather than us ing adaptors or the like as they could cause overheating and burns Installation drain pump dispenser D Ed N salt missing spy lamp LSS salt missing ISS itch f switch switc Half load wash valve softener V Vevi 12 valve D 7 overflow switch H ON the product or on its packaging indicates that this product may not be treated as household waste Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment By ensuring this product is disposed of correctly you will help prevent potential negative conse quences for the environment and human health which could otherwise be caused by inappropriate waste han dling of this product The symbol For more detailed information about recycling of this product please contact your local city office your household waste disposal service or the shop where you purchased the product
9. h hot water at 53 C Drying Short wash at 55 C Cold rinse Short wash at 50 C Cold rinse Short cold wash to prevent food residue from drying on the dishes Cleaning and Special Maintenance Filter Assembly For best performance and results the filter assembly must be cleaned The filter efficiently removes food particles from the wash water allowing it to be recirculated during the cycle For this reason it is a good idea to remove the larger food particles trapped in the filter after each wash cycle by rinsing the A semi circular filter and cup under running water To remove the filter assembly pull on the cup handle in an upward direction The entire filter assembly made up of the A semicircular filter and the B fine filter should be cleaned at least once a month To clean the filter and the fine filter use a cleaning brush Then reassemble the filter parts as shown in the figures below and inset the entire assembly in the dishwasher positioning in its seat and pressing downward The dishwasher must never be used without the filters Improper replacement of the filters may reduce performance of the appli ance and damage dishes and utensils Troubleshooting It may occur that the dishwasher does not function properly or at all Before calling for assistance let us see what can be done first Have you forgotten to press one of the buttons or to per form an essential operation The Dishwasher Does N
10. ith out spotting The dispenser is located on the inside panel of the door and should be filled after every 80 wash cycle or when the rinse aid indicator light comes on for models with this feature Loading the Rinse Aid To open the dispenser turn the C cap in an anti clockwise di rection and then pour in the rinse aid making sure not to overfill The amount of rinse aid used for each cycle can be regulated by turning the F dosage adjuster located beneath the C cap with a screwdriver There are 6 different settings the normal dosage setting is 3 Important Proper dosage of the rinse aid improves drying If drops of water remain on the dishes or spotting occurs the dosage adjuster should be turned to a higher setting If the dishes have white streaks turn the dosage adjuster to a lower setting Loading the Dishwasher Before placing the dishes in the dishwasher remove larger food particles to prevent the filter from becoming clogged which re sults in reduced performance If the pots and pans have baked on food that is extremely hard to remove we recommend that they are soaked before washed This will eliminate the need for extra wash cycles Pull out the rack to load the dishwasher How to use the lower rack We recommend that you place the most difficult to clean items on the bottom rack pots pans lids serving dishes and bowls as shown in the figure to the right It is preferable to place serving dish
11. of salt consumed based on the hardness of the water used This is intended to optimise and customise the level of salt consump tion so that it remains at a minimum To adjust salt consumption proceed as follows Unscrew the cap from the salt container There is a ring on the container with an arrow on it see figure If necessary rotate the ring in the anticlockwise direction from the setting towards the sign based on the hardness of the water being used It is recommended that adjustments be made in accordance with the following scheme Water Hardness Clarke ogy mmol Selector consumption degrees position Grams cycle jor form fown e f cycles 2kg Detergent and Rinse Aid Detergent Detergent specifically intended for use with dishwashers must be used The dispenser must be refilled before the start of each wash cycle following the instructions provided in the Wash Cycle Table The detergent dispenser is located on the inside panel the door Loading the detergent To open the A cover on the dispenser press the B button The detergent for the wash cycle should be poured into the C compartment After the detergent has been placed in the dispenser close the cover and press down until it clicks in place NOTE To facilitate closing the cover remove any excess detergent on the edges of the dispenser Rinse Aid This product makes dishes sparkle and helps them to dry w
12. or G ON OFF Button Close up View Interior Upper Rack Rack Height Adjustor Top Sprayer Arm Lower Rack 0 O WwW gt Technical Characteristics Width Depth Height Capacity Mains water pressure Power voltage Total absorber power Q mn m nmo OU gt Bottom Sprayer Arm Washing Filter Detergent and Rinse Aid Dispenser 60 cm 60 cm 85 cm 12 standard place settings 0 03 0 6 MPa 220 240V 50Hz 1950W Salt The hardness of the water varies from place to place If hard water is used in the dishwasher deposits will form on the dishes and utensils The appliance is equipped with a special softener that uses a salt specifically designed to eliminate lime and minerals from the water Loading the Salt into the Softener Always use Salt intended for use with dishwashers The salt container is located beneath the lower rack and should be filled as follows Remove the lower rack and then unscrew and remove the cap from the salt container If you are filling the container for the first time fill it with water Place the end of the funnel supplied into the hole and intro duce about 2 kg of salt It is normal for a small amount of water to come out of the salt container Carefully screw the cap back on To prevent the formation of rust load the salt just before beginning a wash cycle Adjusting Salt Consumption The dishwasher is designed to allow for adjusting the amount
13. or an ex tended period of time let the water run to make sure that the water is clear and free of impurities If this precaution is not taken there is a risk that the water inlet can get blocked and damage the appliance Hot Water Connection The water supply to the appliance can also be connected to the house s hot water line centralised system heating system as long as it does not exceed a temperature of 60 In this case the wash cycle time will be shortened by about 15 minutes and the wash efficiency slightly reduced The connection must be made to the hot water line following the same procedures as those for the connection to the cold water line 10 Drain Hose Connection Insert the drain hose into a drain pipe with a minimum diameter of 4cm or let it run into the sink making sure to avoid bending or crimping it Use the special plastic support that comes with the appliance see fig 2 The free end of the hose must be ata height between 40 and 100 cm and must not be immersed in water A P fal Poe a i F a Fi rt _ io i Zz i MAX 100 j MIN 40 Attention The special plastic hose support must be solidly fastened to the wall to prevent the drain hose from moving and allowing water to spill outside the drain Electrical Connection After making sure that the voltage and frequency values for the current in the home correspond to those on the rating plate located on the stainl
14. ot Start Have you checked whether the plug is pushed into the socket correctly the power is on in the house the door is closed properly the ON OFF switch is on ON the water supply is turned on The Dishwasher Does Not Load Water Have you checked whether the water is turned on and the hose is connected properly the water supply to the houses on and has sufficient pressure the water supply hose is crimped or bent the filter for the water supply hose is clogged The Dishes Are Not Clean Have you checked whether the water is turned on and the hose is connected properly the water supply to the house is on and has sufficient pressure the water supply hose is crimped or bent the filter for the water supply hose is clogged Cleaning the Spray Arms It may happen that food particles become encrusted on the sprayer arms and block the hole see Close up view interior letters C E Check the sprayer arms periodically and clean them when needed Cleaning the Water Inlet Filter Periodically clean the water inlet filter located on the outlet of the water supply tap After turning off the water tap unscrew the end of the water sup ply hose remove the filter and clean it carefully under running water Then return the filter to its place and tighten the water supply hose back into position The Dishwasher Does Not Drain Have you checked whether the drain hose is crimped or bent
15. way can only be modified if it has been run ning for a short time Otherwise the detergent may have already been used and the appliance may have already drained the wash water If this is the case the detergent dispenser must be refilled see the paragraph entitled Loading the Detergent Press the ON OFF button and the ON light will turn off Rotate the knob in clockwise direction to the desired cycle setting see the section entitled Starting a wash cycle Then turn the dishwasher back on using the ON OFF button Half load Button This button see Close up View Control Panel letter C makes it possible to wash dishes using only the upper rack if there are not enough dishes for a full load This will allow you to save on water and electricity It can be used before setting any of the wash cycles Please keep in mind that the amount of detergent should also be cut in half Energy Saving Tips It is important to try and run the dishwasher when it is fully loaded to save on energy In order to prevent odors from forming and food from caking onto the dishes you can run the soak cycle Choose the right wash cycle the choice of cycle depends on the type of dishware cookware and utensils being washed and how dirty they are How to Keep Your Dishwasher in Shape After Every Wash After every wash turn off the water supply to the appliance and leave the door slightly ajar so that moisture and odors are not
Download Pdf Manuals
Related Search
Related Contents
(ADC 2000) - Aptecelectronics.com AKG K512 headphone Chip Identifications Adapters 伸縮(スワン型)杖取扱説明書 伸縮(スワン型)杖取扱説明書 Manuel Rideau d`air confort Modèle CA2 9362859a, Istruzioni per l`uso Ricevitore satellitare Twin EC3-332 Coldroom Controller and ECD-001 Display Unit ! 1 - Datacomm Express Copyright © All rights reserved.
Failed to retrieve file