Humminbird RF35 SmartCast User's Manual
Contents
1. Area of bottom coverage equals twice the current depth FCC ID IGLSMG1 Humminbird This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation CAUTION Changes or modifications not expressly approved by Humminbira could void the users authority to operate the device Contact Humminbird Your Humminbird accessory is designed for trouble free operation and is backed by a six month warranty If you have any questions contact our Humminbird Customer Resource Center By Telephone Monday Friday 8 00 a m to 4 30 p m Central Standard Time 1 800 633 1468 typically we respond to your e mail within three business days custserv johnsonoutdoors com For direct shipping our address is Humminbird Service Department 678 Humminbird Lane Eufaula AL 36027 USA HUMMINBIRD2. RF35 has three power states e Off Display is turned off e Normal Fishing Mode used for fishing e Watch Mode low power continuous time display To turn the RF35 on press the POWER MENU button the otart Up screen will appear then automatically change to Normal Fishing mode if you take no further action To turn the RF35 off press the POWER MENU button until you hear a beep indicating that you are in Watch mode then press the RIGHT Cursor button to shut down the display NOTE If you leave the RF35 in Normal Fishing mode for more than 10 minutes while it is waiting for a signal the unit will timeout automatically and enter Watch mode in order to save power Watch Mode Watch mode provides a continuous time display To enter power saving Watch mode start from Normal Fishing mode press and hold the POWER MENU button until you hear a beep then release The time and date will be continuously displayed indicating that the RF35 is in Watch mode You can press the POWER MENU button again to return to Normal Fishing mode GTaRT ue Start Up in Normal Fishing __ Mode After pressing the POWER MENU button to turn on the Wrist Mounted Display you will see the Start Up screen The Start Up screen will disappear automatically after two seconds have passed without further action from you In Normal Fishing mode the screen will either display sonar information or the RF35 omartCast screen will appear indicating t
3. hole is for using the RSS as a float Connect a lighter weight hook line to this hole Do not over weight the hook line as this will submerge the RSS causing signal loss CAUTION You will increase the possibility of breaking your line if you use light test pound line on your reel The RSS is positively buoyant is buoyant under its own weight plus 0 2 ounces or 5 g of bait and lead weight The maximum amount of weight for any attachment to the RSS is approximately 4 to 4 ounces 5 3 g to 5 8 9 and includes the combined weight of any hook line weight swivel snap swivel and bait that is attached to the ASS The RSS itself weighs 1 ounce 28 g and therefore light test line might break NOTE Store the RSS in a ary non metallic container such as a tackle box in a separate compartment and isolated from any metallic devices RSS Power The Remote Sonar Sensor RSS has a separate non replaceable lithium battery that has a shelf life of three years and will last for approximately 500 hours of in water use when the nighttime LED is turned off Discard the used RSS in compliance with local laws as you would any electronic component or battery The RSS will turn on its Sonar Transmitter Receiver automatically when it is immersed in the water Once immersed the RSS will begin transmitting the sonar information via radio frequency RF to the Wrist Mounted Display The RSS automatically stops usin
4. to crack RSS Maintenance After using the RSS in salt water wipe the affected surfaces with a cloth dampened with fresh water The RSS Wet Switch pins must be rinsed with fresh water after exposure to salt water to prevent corrosion lf your RSS remains out of the water for a long period of time it may take some time to wet it when returned to the water Small air bubbles can cling to the surface of the RSS and interfere with proper operation Wipe the face of the RSS with a wet cloth to remove them If sonar performance becomes weak i e there are bottom gaps or 0 depth readings the bottom of the RSS needs to be cleaned with a drop or two of a 5 to 10 percent solution of liquid dish washing detergent and water Use approximately one tablespoon 15 ml detergent to 8 ounces 237 ml of water to remove oils from the face of the RSS then wipe with a damp cloth Troubleshooting Do not attempt to repair the RF35 Wrist Mounted Display or RSS yourself There are no user serviceable parts inside and special tools and techniques are required for assembly to ensure the waterproof integrity of the housings Repairs should be performed only by authorized Humminbird technicians Many requests for repair received by Humminbird involve units that do not actually need repair These units are returned no problem found If you have a problem with your SmartCast use the following troubleshootin
5. will void the warranty Handling and or opening this unit may result in exposure to lead in the form of solder WARNING This product contains lead a chemical known to the state of California to cause cancer bith defects and other reproductive harm WARNING The bottom of the RSS should not be handled during sonar operation as this may cause physical discomfort and may result in personal injury in the form of tissue damage Handle the RSS only by the antenna tower when it has been in the water WARNING The RSS Remote Sonar Sensor is not intended for use by children younger than 6 years old without adult supervision as the RSS may represent a choking hazard to small children To scan an area cast and then reel in ata Using the SmartCast Slow steady rate with your rod tip up i The SmartCast is a first of its kind wireless fish finder that is incredibly easy to use Simply attach the Remote Sonar Sensor RSS to the end of your fishing line and cast it into the water as you would a normal float or lure Then power on the SmartCast RF35 and you are ready to fish The smartCast system uses sonar technology to send sound waves from the RSS into the water The returned echoes are transmitted with wireless technology to the RF35 and plotted on the display New information appears on the right As this information moves to the left a very accurate picture of the underwater world is create
6. 931348 1_A Thank You Thank you for choosing Humminbird America s 1 name in fishfinders Humminbird has built its reputation by designing and manufacturing top quality thoroughly reliable marine equipment Your Humminbird is designed for trouble free use in even the harshest marine environment In the unlikely event that your Humminbird does require repairs we offer an exclusive Service Policy free of charge during the first six months after purchase and available at a reasonable rate after the six month period For complete details see the warranty information at the end of this manual We encourage you to read this operations manual carefully in order to get the full benefit from all the features and applications of your Humminbird product The RF35 SmartCast product should have e One Advanced Remote Sonar Sensor RSS e One Wrist Mounted Display with installed 2450 CR battery e One extra 2450 CR battery e This RF35 SmartCast Operations Manual lf any of these components are missing please contact our Customer Resource Center at either 1 800 633 1468 or visit our website at www humminbird com NOTE The RF35 also comes in an International version that Is CE complant WARNING Disassembly and reoair of this electronic unit should only be performed by authorized service personnel Any modification of the serial number or attempt to repair the original equipment or accessories by unauthorized individuals
7. TIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY RELATING TO THE PRODUCTS International Purchases A separate warranty is provided by international distributors for units purchased outside the United States This warranty is included by your local distributor and this distributor maintains local service for your unit Warranties are only valid in the area of intended distribution Units purchased in the United States or Canada must be returned to our factory in the United States for service Humminbird Service Policy Even though you ll probably never need to take advantage of our incredible service policy it s good to know that we back our products this confidently We do it because you deserve the best We will make every effort to repair your unit within three business days from the receipt of your unit at our factory This does not include shipping time to and from our factory Units received on Friday are typically shipped by the following Wednesday units received Monday are typically shipped by Thursday etc All repair work is performed by factory trained technicians to meet exacting factory specifications Factory serviced units go through the same rigorous testing and quality control inspections as new production units After the original warranty period a standard flat rate service charge will be assessed for each repair physical damage and missing parts are not included Any repairs made after the original war
8. bird have been manufactured free from defects in materials and workmanship This warranty is effective for 6 months from the date of original retail purchase Humminbird products found to be defective and covered by this warranty will be replaced or repaired free of charge at Humminbird option and returned to the customer freight prepaid Humminbird sole responsibility under this warranty is limited to the repair or replacement of a product that has been deemed defective by Humminbird Humminbird is not responsible for charges connected with the removal of such product or reinstallation of replaced or repaired parts This warranty does not apply to a product that has been e mproperly installed e Used in an installation other than that recommended in the product installation and operation instructions e Damaged or has failed because of an accident or abnormal operation e Repaired or modified by entities other than Humminbird Please retain your original receipt as a proof of the purchase date This will be required for in warranty Service THIS WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES OBLIGATIONS OR LIABILITIES ON THE PART OF HUMMINBIRD AND WILL BE THE CUSTOMER S EXCLUSIVE REMEDY EXCEPT FOR ANY APPLICABLE IMPLIED WARRANTIES UNDER STATE LAW WHICH ARE HEREBY LIMITED IN DURATION TO SIX MONTHS FROM THE DATE OF ORIGINAL PURCHASE IN NO EVENT WILL HUMMINBIRD BE LIABLE FOR ANY INCIDENTAL OR CONSEQUEN
9. can either wait 20 seconds for programming mode to time out the Start Up screen will appear on the Control Head display or continue immediately to the next procedure to change the channel Changing the Channel on the Advanced RSS To change the channel type on the Advanced RSS 1 From the Light programming mode see Turning on the Advanced RSS Blinking Light touch and release the wet switch contacts twice more with your moist finger to change from the Light programming mode to the Channel programming mode The temperature reading on the Control Head will change to show a temperature reading of 90 F 9 C channel set to A Temperature of 50 Means Channel Temperature of 55 Means Channel is Set toA is Set to B 2 To change the setting to 55 F 12 C channel set to B touch and release the wet switch contacts once more Wait two seconds and then confirm that the temperature reading on the Control Head has changed to 55 F 12 C Single touches will toggle the setting between 50 F 9 C and 55 F 12 C 3 Once you have made your selection wait 20 seconds for programming mode to time out the Start Up screen will appear on the Control Head 4 Use the SetUp Channel Select menu on the Control Head to switch the software to match the new channel designation on the Advanced RSS See Channel Select SetUp Menu for more information CAUTION Make sure that you change the Channel Selection on the Control Head to mat
10. ch the new Advanced RSS Channel before using the Advanced RSS Using a First Generation RSS First generation RSS units still sold with other SmartCast products come in two versions Channel A and Channel B RF40A and RF40B and are both compatible with the RF35 NOTE When using either an RF40A or RF40B RSS with the AF365 you will not get water temperature and you will not be able fo turn on the LED or change the channel on the ASS You wil still be able to read digital depth and bottom contour information NOTE When using an RF40A or RF40B RSS make sure to select the matching channel from the CHANNEL SELECT menu on the Control Head Maintenance Your SmartCast is designed to provide years of trouble free operation with virtually no maintenance Follow these simple procedures to ensure your SmartCast continues to deliver top performance WARNING Never leave the RF35 SmartCast product in a closed car or trunk the extremely high temperatures generated in hot weather can damage the electronics Wrist Mounted Display Maintenance If the Wrist Mounted Display comes into contact with salt spray wipe the affected surfaces with a cloth dampened with fresh water When cleaning the protective lens on the display use a chamois and non abrasive mild cleaner Do not wipe while dirt or grease is on the lens Be careful to avoid scratching the lens Do not use a chemical glass cleaner on the lens as this may cause it
11. d including objects such as the bottom fish and structures as well as the depth of the bottom NOTE The RF35 display is designed to be used with polarized sunglasses only when the user is looking straight at the screen You may not be able to read the display trom other angles when wearing polarized sunglasses WARNING The electronic parts in the Remote Sonar Sensor ASS are made to withstand use when casting into water Because shock trom abrupt contact with rocks can damage your ASS we do NOT recommend using your RSS in water that IS less than one foot 0 3 m deep Operational Modes The RSS can be used in two distinct ways Sonar Graph The RSS can be used to create a sonar graph of the bottom Cast the RSS into the water beyond an area of interest then reel in the RSS at a slow and Steady rate The digital display will provide precise information for bottom contour depth and structure below the RSS Fish and bait fish will be displayed when detected OMARILAST Stationary Float The RSS can be used as a float in a Stationary location to monitor the area below giving you a live update as fish approach your bait Activating the Wrist Mounted Display Battery When you first use the RF35 SmartCast Wrist Mounted Display you will need to activate the display battery Use a coin to remove the battery door on the back of the Wrist Mounted Display then remove the plastic strip l
12. et to CHANNEL A factory default 55 F 12 C RSS is set to CHANNEL B IMPORTANT The SmartCasf Control Head must be turned on and the CHANNEL SELECT SetUjp menu on the Control Head must be set to Channel A even if the RSS is set to Channel B before you can see the feedback on the Control Head temperature readout NOTE The Advanced RSS programming mode will tme out after 20 seconds of no user activity display the Start Up screen and retum the RSS to normal operation NOTE If the temperature display returns to a normal reading or the Start Up screen appears on the display you are no longer in programming mode How the Wet Switch Works In the following sections you will use the wet switch contacts on the bottom of the Advanced RSS to enter programming mode and to change the Light and Channel settings Before you try these procedures for the first time please read through this section to familiarize yourself with the way the Wet Switch works Your finger should be moist but not dripping before you touch the Wet Switch You can achieve the correct dampness by dipping your finger in water then dabbing your finger twice on a towel A touch means touching both wet switch contacts at the same time with your moistened finger using medium pressure The time between touches needs to be one second or less NOTE Your finger must make contact with both of the wet switch pins simultaneously in order to ta
13. first enter Setup mode press the RIGHT or LEFT Cursor buttons repeatedly to change the hour Make sure that you have selected the correct hour for the time of day AM or PM When the desired hour is displayed press the POWER MENU button to begin editing the minutes 2 Press the RIGHT or LEFT Cursor buttons repeatedly to change the Minutes When the desired minutes are displayed press the POWER MENU button to begin editing the month 3 Press the RIGHT or LEFT Cursor buttons repeatedly to change the month When the desired month is displayed press the POWER MENU button to begin editing the day 4 Press the RIGHT or LEFT Cursor buttons repeatedly to change the day When the desired day is displayed press the POWER MENU button to begin editing the year 5 Press the RIGHT or LEFT Cursor buttons repeatedly to change the year When the desired year is displayed press the POWER MENU button to exit setup Mode Activating the Backlight Use the backlight for night fishing or low light conditions NOTE The display contrast may require adjustment for optimal viewing in low light conditions when the backlight is activated Press the LEFT Cursor Button to activate the backlight The backlight will automatically turn off after approximately 3 seconds NOTE The backlight can only be activated if the LEFT Cursor Button is not currently being used i e being used to alter a menu setting Viewing the Time Pressing the RIGHT C
14. g guide before calling the Customer Resource Center or sending your unit in for repair 1 The SmartCast loses signal lf the SmartCast is not able to get an RF signal from the RSS the display will stop updating the screen will freeze and the RF35 smartCast screen will be displayed after several seconds Whenever reception is lost or the RSS emerges from the water for more than a few seconds the RF35 SmartCast screen will be displayed until the RSS is placed back in the water and reception is regained e The SmartCast system is a line of sight wireless product If objects are placed between the RSS and the Wrist Mounted Display the reception may be lost The RF35 depth range is 2 to 120 feet 0 6 to 35 meters Erratic readings may occur in water that is shallower than 2 feet 0 6 m In addition because of the nature of sonar this product is not intended for use in swimming pools or small enclosed bodies of water Reeling the RSS too fast can cause loss of signal and the screen will freeze Check the buoyant balance between the RSS and your tackle over 0 2 ounce 5 7 grams will submerge the RSS causing signal loss e The RF35 may not obtain its maximum RF distance of 75 feet 22 meters unless the water is smooth Waves or chop may reduce the RF range significantly NOTE Retrieving the RSS too rapidly or the repetitive rocking motion of rough water can result in loss or distortio
15. g power a few seconds after being pulled out of the water WARNING Do not place the RSS in a wet area when not in use as this will turn on the RSS and shorten its usable life Store the RSS in a dry area when not in use to conserve power Never place the RSS in a wet area of a boat or on a metal surface that could accidentally power it on NOTE If the RSS was used in salt water rinse it with tresh water before storing It What s On the Present f San f ag Display The SmartCast displays Bottom wie 7 Fish icon UNderwater information in an LH easy to understand format The top of the display Depth Range Corresponds to the water surface and the bottom of the display corresponds to the selected Depth Range see Depth Range The display varies as the area under the RSS changes Underwater conditions vary greatly so some experience and interpretation is needed to realize all the benefits of the omartCast use the diagram as a guide to the most common conditions and practice using the SmartCast over Known bottom types The SmartCast can also display the time and date Press the RIGHT Cursor button to momentarily view the time and date Powering the LEFT RIGHT Display ON and Cursor Cursor Button 5 Button OFF NOTE If you have just Display ken the RF35 out of POWER the box see Activating MENU Button the Wrist Mounted Display Battery Your
16. g to interpret sonar returns and will display a Fish Symbol when very selective requirements are met Fish Alarm does not sound if Fish ID is turned off On Off Default On Channel Press the POWER MENU button until CHANNEL appears Select either A or B to match your RSS See Channel A and B RSS Units A B Default A Contrast Press the POWER MENU button until CONTRAST appears Select a setting from 1 through 10 1 to 10 Default 5 Channel A and B RSS Units Your SmartCast unit comes with an Advanced RSS This Advanced RSS may be programmed to either Channel A or Channel B This A B Channel option gives you the flexibility to switch to a different channel if another angler is using a omartCast unit within 150 feet of your RSS to reduce possible interference See Changing the Channel on the Advanced RSS for details on selecting either Channel A or Channel B NOTE RSS units regardless of channel may generate erratic depth readings as a result of sonar interference when used in close proximity closer than 40 feet to each other or to other sonar devices Understanding the Advanced RSS The Advanced RSS provides the following functionality e Water Surface Temperature e Blinking Light for nighttime use e A B Channel Select Water temperature will be displayed automatically on the screen You must manually program the Advanced RSS in order to turn the light on or off or to change
17. hat no sonar information is currently available si ra When you have powered on the Wrist ig Mounted Display and have cast the i RSS into the water returned sonar data will start to be displayed A f ai vertical line will appear first followed by a bottom depiction and possible fish H locations if fish are sensed Start Up in Simulator Mode To enter Simulator mode press the POWER MENU button to turn on the RF35 wait until you see the Start up screen then quickly press the RIGHT Cursor Button Once you are in Simulator mode the display will show the word Simulate and then after two seconds will show simulated data To exit Simulator mode you must power down the RF35 Start Up in Setup Mode Use Setup to set the Time and Date To enter Setup mode press the POWER MENU button to turn on the RF35 wait until you see the Start Up Screen then quickly press the RIGHT Cursor Button twice Once you are in Setup mode the display will briefly flash the word Setup then show the Time and Date Changing the Time and Date To change the Time and Date enter Setup Mode see Start Up in Setup Mode When you see the Time and Date display the Hour digit will flash first indicating that you can change the hour Once you change the hour you must perform all of the following steps to get to the end of setup mode NOTE The flashing numeral or digit is the one that can be edited k When you
18. n of the bottom detail on the display For best bottom detail perform a smooth and slow reel in with constant soeed and the rod tio up holding the rod tip low or using a heavy line may cause the ASS to submerge and momentarily lose radio contact The ASS has a maximum transmit range of 75 feet 22 meters If the unit is cast or drifts more than 75 feet 22 meters away from the receiver the signal may be inconsistent or lost 2 Nothing happens when turn the Wrist Mounted Display on Check the battery position and make sure that the battery door is properly closed Also make sure that you have removed the plastic strip that is in the battery compartment when it is new lf this doesn t help replace the battery After replacing the battery if the unit still doesn t power up remove the battery door again and re install 3 When in very shallow water get gaps in the bottom reading and inconsistent digital depth indication The SmartCast will work reliably in water 2 feet 0 6 meter or deeper The depth is measured from the Rog 4 The display begins to fade out Images are not as sharp as normal Check the battery position and make sure that the battery door is properly closed Also make sure that you have removed the plastic strip that is located in the battery compartment when it is new lf this doesn t help replace the battery After replacing the battery if the unit still has a faded display rem
19. ocated in the battery compartment Make sure that the O ring in the battery compartment is J present positioned correctly in A the grooves and free of debris LA J bY F 4 before re installing the battery door NOTE Replace the Wrist Mounted Display battery only with a 2450 CR tyoe battery These batteries can be purchased from most 4 electronics retailers NOTE Under normal use you should expect the hfe of the display battery to last uo to 40 hours of operation Operation in cold weather will significantly reduce the life of the battery NOTE Your RF35 wil start up in Watch mode after the battery is installed initially See Powering the Display ON and OFF and Watch Mode for more information Attaching the RSS The line coming from your reel can be tied off to the front hole in the Remote Sonar Sensor RSS If you also wish to use the RSS as a conventional float use the second hole to attach your hook using a lighter weight line A snag will break the lighter line if you have to break free Slip line techniques are not recommended because of the higher risk of losing the RSS If you do use the slip line method use a lighter weight line after the lower stop enabling retrieval of the RSS if the lower line with hook breaks away Handle the RSS by the antenna tower _ when it has been in water a Use a heavy test line standard knots and tackle such as a swivel The second leader
20. ove the battery door again and re install 5 The display shows many black dots at high sensitivity settings You are seeing noise or interference caused by one of several sources Noise can be caused by other electronic devices Turn off any nearby electronics and see if the problem goes away Other sonar devices or any electronic device operating in the 900 mHz range in the 400 mHz range for International versions could cause interference with your smartCast 6 The display shows fluctuating depth readings and excessive Clutter including vertical bars that may be drawn on top of fish icons The SmartCast system comes with the capability to receive separate signals from a Channel A RSS or a Channel B RSS Two A or B type RSS units used simultaneously as well as one A and one B tyoe RSS unit used simultaneously can cause RF interference between each other 7 The display jumps and the bottom has an abrupt Change sometimes a vertical line is missing or a black line from top to bottom is displayed This display image jump is due to an automatic change in depth New returns graphed at a different scale will not match up with the historic data already graphed at a higher or lower scale Vertical lines can also occur as the radio signal from the RSS is lost and then regained in rough water conditions Humminbird 6 Month Limited Warranty We warrant the original retail purchaser that products made by Hummin
21. p them successtully see the procedures that follow for specific instructions on turning the light on or off or changing the channel from A to B Turning on the Advanced RSS Blinking Light To turn on the blinking nighttime fishing light 1 Wet your finger and tap the wet switch on the Advanced RSS three times the time between touches needs to be one second or less to enter the Light programming mode The temperature reading on the Control Head will change to show a temperature reading of 40 F 4 C blinking light OFF Temperature Setting of 45 Means LED is On Temperature of 40 Means LED is OFF 2 To change the setting to 45 F 7 C blinking light ON touch and release the wet switch contacts once more Wait two seconds and then confirm that the temperature reading on the Control Head has changed to 45 F 7 C Single touches will toggle the setting between 40 F 4 C and 45 F 7 C NOTE When the LED is set to ON it will flash every four seconds when the RSS is in operation e when the wet switch is submerged Even when the LED is set to ON the LED will not flash unless the wet switch is activated If you want to test the RSS to make sure the LED is set to ON before using the RSS wet your finger and hold it on the wet switch if the LED is set to ON the LED will begin to fash NOTE Repeat steps 1 and 2 to tun off the LED when finished with night fishing 3 Once you have made your selection you
22. ranty will be warranted for an additional 90 days after service has been performed by our factory technicians You can contact our Customer Resource Center or visit our website to verify the flat rate repair fee for your product visit the Product Support section http www humminbird com We reserve the right to deem any product unserviceable when replacement parts are no longer available or impossible to obtain This Service Policy is valid in the United States only This applies only to Humminbird products returned to our factory in Eufaula Alabama This service Policy is subject to change without notice Returning Your Unit for Service Before sending your unit in for repair please contact the factory either by phone or by email to obtain a Repair Authorization Number for your unit Please have your product model name and serial number available before calling the factory If you contact the factory by e mail please include your product model name and serial number in the e mail and use Request for Repair Authorization Number for your e mail subject header You should include your Repair Authorization Number in all subsequent communications about your unit For IN WARRANTY service complete the following steps e Qbtain a Repair Authorization Number from the Humminbird Customer Resource Center e Jag product with your customer name street address phone number and your assigned Repair Authorization Number e Incl
23. the RSS channel setting to A or B Default settings on new products are Light OFF and Channel A RSS Programming Mode You may change the light setting or the channel type on the Advanced RSS using a programming mode that is accessed by touching the wet switch contacts on the bottom of the RSS NOTE Please read this and the next section BEFORE you try to program the Advanced RSS using the wet switch contacts Specific step by step procedures to tum on the light and to change the channel follow this section You will find it easier to perform these steps once you have grasped the way the programming mode works The programming mode allows you to e turn on the blinking light e switch the Advanced RSS Channel from A to B The SmartCast Control Head temperature readout provides user feedback to help you make the correct selections The temperature readout will change on the Control Head to 40 F 4 C 45 F 7 C 50 F 9 C or 55 F 12 C to signify the following settings NOTE If the temperature readout is set for degrees Celsius then the temperature readout will change on the Control Head to 47 9 or 12 to signify the following settings Light setting Temp changes to Means that 40 F 4 C Blinking light is OFF factory default 45 F 7 C Blinking light is ON but only blinks when the Advanced RSS is in the water Channel setting Temp changes to Means that 50 F 9 C RSS is s
24. ude a brief written description of the problem Include a copy of your receipt to show proof and date of purchase Return product freight prepaid to Humminbird using an insured carrier with delivery confirmation For OUT OF WARRANTY service complete the following steps e Qbtain a Repair Authorization Number from the Humminbird Customer Resource Center e Include payment in the form of credit card number and expiration date money order or personal check Please do not send cash Tag product with your customer name street address phone number and your assigned Repair Authorization Number Include a brief written description of the problem Return product freight prepaid to Humminbird using an insured carrier with delivery confirmation SPECIFICATIONS Wrist Mounted Display Specifications Power Requirement 0 One 2450 CR Battery Display Matrix cccccncncncnrnnnnsna 48 X 32 Pixels DDE M2 aeiia aaaaetilesaanauinetessasneneesonie SIN RSS Specifications Power Requirement w csssssssestssessessnseen One non replaceable Lithium RSS Battery Battery Expected LitG ccuscssssssssessssesesssesssrensenn 3 years approximately 500 hours of in water use Depth Capability occ 2 120 feet 0 6 35 meters DOM Al GOVEIAGS snini 90 10 dB Sonar Operating Frequency vcs 125 kHz Operational Radio Frequency scrire 916 5 mHz 433 92 mHz International Operational RANGE sssini 79 feet 22 meters
25. until DEPTH RANGE appears Auto is the default setting When in automatic the lower range will be adjusted by the unit to follow the bottom Selecting a manual depth range locks it to the setting you select Auto 10 15 20 30 60 or 120 feet 3 5 6 10 20 or 40 meters Default Auto NOTE In manual operation if the water depth is greater than the depth range setting the bottom will not be visible on the alsplay Select Auto to return to automatic operation ri Depth scale changes or signal loss will cause lines with missing detail and or abrupt changes in the graphed bottom When the Depth Range is set to Auto the depth is set Er to keep the bottom in the lower third of the screen The screen image jump shown here is due to an automatic change in depth New returns graphed at a different scale will not match up with the historic data already graphed at a higher or lower scale Vertical lines can also occur as the radio signal from the RSS is lost and then regained in rough water conditions Fish Alarm ri CFE F Press the POWER MENU button until FISH ALARM appears Select Off for no fish alarm or On for fish alarm Fish ID must be set to On for Fish Alarm to work Off On Default Off Fish ID 20h Press the POWER MENU button ene until FISH ID appears Select Fish D Raw Sonar either Off to view raw sonar o H returns or On to view fish m Ee symbols Fish ID uses advanced signal processin
26. ursor Button will display the Time and Date If the RF35 is currently scrolling sonar information the Time and Date will be displayed and then the unit will automatically switch back to Sonar mode If the RF35 is waiting for sonar information the Time and Date will be displayed when the RIGHT cursor button is pressed and then the unit will automatically switch back to waiting for sonar information Menu Features A simple menu system accesses the adjustable features of the SmartCast RF35 To activate the menu system press the POWER MENU button the first time you do this after power up the Sensitivity menu choice will appear Once the RF35 has been powered on pressing the POWER MENU button will display the last menu choice viewed Press the POWER MENU button repeatedly to access other SmartCast menu choices one at a time When a menu choice is on the display use the RIGHT and LEFT Cursor buttons to adjust the menu settings Menus are automatically removed from the display after several seconds Sensitivity Press the POWER MENU button until SENSITIVITY appears Select a higher number to show weaker sonar returns on the display or a lower number to remove clutter from the display Adjusting Sensitivity also affects how sonar returns are identified as Fish ID Symbols more fish will be detected at the highest setting of 10 fewer at the lowest setting of 0 1 10 Default 5 Depth Range Press the POWER MENU button
Download Pdf Manuals
Related Search