Home

Humax DV-1000T User's Manual

1. Notice Copyright Copyright 2001 HUMAX Corporation Not to be copied used or translated in part or whole without HUMAX s prior consent in writing except approval of ownership of copyright and copyright law Warranty The information in this document is subject to change without notice HUMAX does not have any responsibility for direct indirect accidental necessary and other corruptions due to your offer or use of the information contained in this manual Trademarks Dolbv and the double D symbol are trademarks of Dolby Laboratories DTS and DTS Digital Out are trademarks of Digital Theatre Systems Inc Manufactured under license from Dolby Laboratories This product incorporates copyright protection technology that is protected by method claims of certain U S patent and other intellectual property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection technology must be authorized by Macrovision and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation Reverse engineering or disassembly is prohibited US Patent Nos 4 631 603 4 577 216 4 819 098 4 907 093 and 6 516 132 Thank you for purchasing a HUMAX digital terrestrial receiver Please read this user manual carefully to be able to safely install use and maintain the receiver at maximum performance Keep this user manual next to your receiver for future reference
2. GB 1 Notice Read this manual carefully and make sure you understand the provided instructions For your safety know what the reaction upon each action will be Warnings Cautions and Notes Throughout the whole manual pay special attention to the following marks that indicate hazardous situations Warning Indicates a hazardous situation which if not avoided could result in serious injury Caution Indicates a situation which if not avoided could damage the equipment or other apparatus Note Indicates additional information to the user to make the user aware of possible problems and information of any importance to help the user to understand to use and to maintain the installation To reduce the risk of electric shock do not remove cover or back No user serviceable parts inside Refer servicing to qualified service personnel This symbol indicates dangerous voltage inside the product that presents a risk of electric shock or personal injury This symbol indicates important instructions accompanying the product GB 2 Only for DVD player 1 CAUTION CLASS1 LASER PRODUCT Use of controls or adjustments or performance of procedures KLASSE 2 LASER PRODUKT other than those specified herein may result in hazardous LUOKAN 1 LASER LAITE jati KLASSI LASER APPARAT radiation exposure The DVD plaver is classified as a CLASS 1 LASER product The CLASS 1 LASER PRODUCT label is located on the exterior
3. Display the option information Select On Screen Info using the w button and press the OK 27 or button On Display the on screen information when you change the option Off Not display GB 90 4 Settings DVD part 4 Panel Display You can set the front luminosity 1 Select Panel Display using the w button and press the OK or gt button 2 Select one option among Dim Bright Dim for Playback using the w button and press the OK button Dim Front panel luminosity is dim Bright Front panel luminosity is bright 5 Power Saving You can set the power saving 1 Select Power Saving using the a w button and press the OK 2 or jp button 2 Select one option among Screen Saver Time Audio Screen Saver Standby Time using the w button and press the OK or p button Screen Saver Time If there s no action for assigned amount of time 3min 10min 30min screen saver is run If the screen saver time is set to NEVER the screen saver time is not enabled Audio Screen Saver If standby time is set to On audio is muted while the screen saver is on If standby time is set to Off the audio screen saver is not enabled Standby Time If the assigned amount of time 5min 15min 35min has elapsed without playing it automatically goes to Standby status If Standby time is set to NEVER Standby time is not enabled GB 91 4 Settings DVD part 4 4 Disc You can set the option of Disc
4. 2 Supported disc formats The following discs can be used in your DVD Note Supported discs could be different with the following disc e DVD Video Digital Versatile Disc e Super Video CD Video CD Super Audio CD Only plays the CD layer of a hybrid SACD disc Audio CD c MP3 GB 3 Notice Since DVD films are not normally released in all parts of the world at the same time all DVD players have a specific regional code Discs can be given an optional regional code If the regional codes differ between the player and the disc playback is not possible DVDs must be marked ALL for all regions or specific number for specific region to work in this machine If the DVD is marked with a different region it cannot be played in this DVD player Some DVD discs may not have a regional code label even though their playback is prohibited by area limits Region 2 Europe Japan Middle East Egypt South Africa Greenland Europe European Region 2 DVDs may be sub coded D1 through D4 D7 identifies a UK only release D2 a identify European DVDs that are not sold in the UK and Ireland D4 identifies DVDs that are distributed throughout Europe GB 4 Safety and Warning This digital terrestrial receiver has been manufactured to satisfy international safety standards Please read the following safety precautions carefully Safety Instructions and Precautions 1 MAINS SUPPLY 90 250V AC 50 60Hz Operate your product only fro
5. Check the battery of Remote controller 6 Reservation is not available Check whether it it not overlapped with other reservation Cehck whether the power switch is off 7 Video from the VCR is displayed but audio is not played Audio may not sound when you watch the video from the VCR through the RF terminal of the TV when the video signal is inputted from SCART of your receiver To watch video from the VCR through RF terminal connect the VCR and TV with the RF cable For more information refer to the VCR user manual GB 96 DVD only 1 Disc can t be played Ensure the disc label is upwards Clean the disc Check if the disc is defective by trying another disc Check region code 2 No return to start up screen when disc is removed Reset by switching the player off then on again Check to see if the proramme requires another disc to be loaded 3 Distored sound from Hi Fi amplifier Check to make sure that no audio connections are made to the amplifier phono input 4 No color in picture The disc format is not according to the TV set used PAL NTSC Error Message STB only No or bad signal The aerial is not pointing properly Adjust aerial Check the cable from the aerial lf you cannot resolve the problem you may need to have your aerial and installation tested by a professional The channel is scrambled or not available The channel has signal but no audio or video T
6. 1 Press the MENU button 2 Select Disc using the w button and press the OK or gt button a ful a 1 Video CD Playback Control You can set the playback control of video CD Select Video CD Playback Control using the w button and press the OK or p button On Display video CD playback when the video CD is playing Off Not display video CD playback 2 Player Version You can view player information Select Player Version using the w button and press the OK or jp button Confirm the information about Player Version and Release Date 4 5 Parental Control You can set parental control and change your password 1 Press the MENU button 2 Select the Parental Control using the a w button and press the OK or jp button 3 When prompting message is displaved to ask Password enter the Password using the NUMERICAL 0 9 button Qd die a Parental Control GB 92 4 Settings DVD part 1 Country You can set the Country Select Country using the w button and press the OK or p button International You can set your desired country USA You can set Country to USA 2 Parental Level You can set the parental level 1 Select Parental Level using the w button and press the OK E orp button Parental Control 2 If Country set to International select one option among Unrestricted General Most Audience Mature Young Teen
7. 16 MUTE Pauses the audio temporarilv That is volumes on off temporarily 17 SOURCE AUX Selects the input source between TV and receiver Controls input mode of TV 18 TEXT Displavs digital text 19 GUIDE Displavs the Programme Guide 20 0K Selects a menu or confirms the selected operation And displays the channel list during watching a programme 21 EXIT Exits the main menu or Guide screen 22 i INFORMATION Displavs the information about the channel and programme 23 CH 4or PAGE 4 Changes the Channel or Page 24 SUBTITLE Changes the subtitle language 25 DVD FUNCTION BUTTONS Note This part explains STB function only e Press the G cy button to display the game DVD RCU GB 17 1 Before Using the Receiver DVD Note GB 18 DVD DTV Change mode between DTV and DVD DISC MENU Displays the main disc menu MENU Displavs the setup menu in DVD ARROW BUTTONS Changes the channel or move the cursor to the up down left or right menu option BACK Returns to the previous menu and screen SOUNDTRACK Displavs the Soundtrack OPT OPTION Set the listening mode SEARCH Change the search mode CLEAR Delete the track or bookmark in DVD 10 0K Selects a menu or confirms the selected operation 11 EXIT Exits the main menu or Guide screen 12 1 INFORMATION Displays the DISC information 13 SUBTITLE C
8. 1 Parental Control 7 2 Language Setting 7 3 Time Setting 7 4 Schedule 7 5 A V Control 7 6 UHF Tunning 7 7 Miscellaneous Settings 8 Installation 8 1 Automatic Search 8 2 Manual Search 8 3 Default Setting 9 Software Update 9 1 OTA Over the Air 9 2 Software Update from PC 10 System Information 10 1 Status 10 2 Signal Detection 11 Games 12 Manipulating Your TV Using Remote Control GB48 GB45 GB45 GB47 GB48 GB49 GB50 GB53 GB54 GB54 GB55 GB56 GB57 GB57 GB60 GB61 GB61 GB61 GB62 GB63 GB 9 Contents DVD Player 1 Getting Started GB73 2 Playing a DVD VIDEO Disc GB74 2 1 Playing a title GB75 2 2 General Information GB75 2 3 Search GB76 2 4 Skipping Chapter GB77 2 5 Repeat Mode GB77 2 6 Repeat a section of disc GB78 2 7 Fast Playing GB78 2 8 Slow Motion GB79 2 9 Zooming in and out GB79 2 10 Subtitle Audio GB79 2 11 Listening Mode GB80 2 12 Time display GB80 2 13 Angle GB80 3 Playing a Audio CD GB81 3 1 Playing Audio CD GB81 3 2 Detail Information GB81 3 3 Playlist Menu GB83 3 4 Search GB83 3 5 Listening Mode GB84 3 6 Time Display GB85 3 7 Fast Playing GB85 3 8 Play Mode GB86 3 9 Repeat Mode GB86 3 10 Playlist Editor GB86 3 11 MP3 Disc Scan GB87 4 Settings DVD part GB88 4 1 Language GB88 4 2 Audio GB89 4 3 Display GB90 4 4 Disc GB92 4 5 Parental Control GB92 GB 10 Appendix1 Menu Map Appendix2 Trouble Shooting Appendix3 Specification Appendix4 Glossary Appen
9. CH28 CH69 PAL B for Europe Australia 2 PAL You can select the channel range and frequency table 1 Select PAL using the a w button and press the OK or jp button 2 Select one option among PAL I PAL G PAL B using the w button and press the OK button You can adjust fine tuning setting 1 Select UHF Offset using the w button and press the OK or jp button 2 Select a range between 4 4 using the w button and press the OK button GB 52 7 7 Miscellaneous Settings 1 Press the MENU button 2 Select Preferences using the w button and press the OK or jp button 3 Select Miscellaneous Settings using the w button and press the OK or button 1 i Plate Display Time You can set the duration during which the Information box is to be displayed when you switch the channel 1 Select i Plate Display Time using the a w button and press the OK 27 or p button 2 Select a value between 1 20 seconds using the w button and press the OK button Note When itis set to Disable the i Plate will not be displayed when you switch the channel 2 OSD Transparency You can set the transparency of On Screen Display 1 Select OSD Transparency using the a w button and press the OK or jp button 2 Select one option among Disable 25 50 75 using the w button and press the OK 7 button Disable Fully opaque screen 25 50 75 As the number is big
10. Note Press the OPT button when the channel list is displayed to view Option List Then the following functions in the option list are performed to the current channel where cursor is located 1 Add a channel to favourite group You can add current channels to the favourite group immediately Also you can add a channel to multiple Favourite groups 1 Press the OPT gt button 2 Select Favourite using the w button and press the jp or OK button 3 Select favourite group using the w button and press the OK button to register for Favourite Group 4 Press the OK button again on the selected Favourite Group to release the registered channel 5 Move to the parent menu using the q button to save the changes automatically Note For detailed information about how to change Favourite Group s name and how to register Favourite Channel for the whole channels refer to Chapter 5 GB 30 2 Lock Unlock a Channel You can lock or unlock the current channel while watching a programme 1 Press the OPT gt button 2 Select Lock using the w button and press the jp or OK button 3 Select Lock option using the w button and press the OK 2 button 4 Select Unlock option using the w button and press the OK button 5 You will be prompted to enter your Password Enter your password to unlock the channel 6 Move to the parent menu using the q button to s
11. available cleaning agents or antistatic sprays designed for analogue records 2 Handling discs Do not touch the playback side of disc Hold the disc by the edges so that fingerprints will not get on the surface 3 Storing discs After playing store the disc in its case Do not expose the disc to direct sunlight or sources of heat or leave it in a parked car exposed to direct sunlight as there may be a considerable temperature increase inside the car GB 7 Contents STB GB 8 1 Before Using the Receiver 1 1 Package Contents 1 2 Front Panel 1 3 Rear Panel 1 4 Remote Control 2 Setup 2 1 Connecting the Antenna for STB 2 2 Connecting for DVD player 2 3 Powering On 3 Loading 3 1 Booting Mode 3 2 Installation Wizard 4 Basic Operation 4 1 Switching Channel 4 2 Volume Control 4 3 Text and Interactive Services 4 4 Change the Subtitle Language 4 5 Change a Audio Language 4 6 Program Information l plate 4 7 Option List 5 Channel List 5 1 Displaying and Switching Channel List 5 2 Changing Channel List Group 5 3 Edit Channels 5 4 Edit Favourite Channels 5 5 Channel Change Mode 6 Program Guide 6 1 Viewing Programme Guide Information 6 2 Finding a Programme 6 3 Viewing Reserved Programme GB12 GB12 GB13 GB14 GB15 GB19 GB19 GB22 GB24 GB25 GB25 GB25 GB26 GB26 GB26 GB26 GB27 GB27 GB28 GB30 GB32 GB32 GB33 GB34 GB36 GB39 GB40 GB40 GB42 GB43 7 Setting Preferences 7
12. button to increase the backward playing speed 3 Each time you press the FORWARD or BACKWARD G 22 button the playing speed options are rotated as below Forward X2 gt X3 gt x4 gt normal play gt x2 gt x3 Backward X2 gt X3 gt X4 gt normal play gt x2 gt x3 Note Press the jp button to play at normal speed e This is also applied to menu playback audio main screen and playlist GB 85 3 Playing a Audio CD 3 8 Play Mode 1 Press the PLAY MODE 4 button during playing to display play mode Press the PLAY MODE 4 button repeatedly to rotate the play mode in the order of Normal gt Shuffle gt Intro gt Normal Normal Plays in normal track order Shuffle Plays in random track order Intro Plays the beginning of a track for 10 seconds 3 9 Repeat Mode Note 3 10 Press the REPEAT MODE button during playing to display current repeat mode Press the REPEAT MODE button repeatedly to rotate the repeat mode in the order of Off gt Disc gt Track gt Playlist gt Off Select Off to disenable repeat mode If the playlist is set to Off you cannot select repeat mode The Disc repeat mode is disable during playing in the Playlist Playlist Editor You can edit the playlist to play music file with the making lists 1 2 Press the PROGRAM 5 or LIST button during playing to display Playlist Editor Select Edit Playlis
13. buttons to adjust the audio volume of your TV 2 Press the MUTE gt button to stop the sound of your TV temporarily Note The mute function keeps enabled while you change the channel This function is only for TV Refer to chapter 12 to set the TV 4 3 Text and interactive services If your chosen channel has teletext MHEG features you can access them Teletext services often load automatically shortly after the Digital Teletext window is displayed In which case simply follow the given instructions press color buttons 1 Press TEXT button to access teletext MHEG features 2 Press TEXT button again to return to normal viewing 3 Press the CH CH button to exit this service Note You should select OFF from the subtitle language to display teletext MHEG GB 26 4 Basic Operation 4 4 Change the Subtitle Language If the current programme provides Subtitle information you can select the language for the Subtitle 1 2 Note Select OFF from the subtitle language list if you do not Press the SUBTITLE button to display the subtitle language list Select your desired subtitle language using the a W button and press the OK button Then the subtitle will be displayed in the selected language at the bottom of the screen wish subtitles to be displayed on the screen You can select a default subtitle language by selecting MENU Preferences Language Setting Subtitle La
14. desired channel to move within the Favourite channel list and press the OK 6 button 3 Select f and press the OK button 4 Move the cursor to your desired location using the w button and press the OK button 5 The selected channel s is moved to the desired location you selected 3 Rename a favourite channel list You can rename Favourite channel list 1 Select Favourite group to rename using fal 2 Select BA and press the OK button 3 Enter the Favourite channel list name using the keyboard displayed on the screen 4 When finishing entering the favourite channel list name select OK and press the OK button GB 37 5 Channel List 4 Additional Features Additional Features provides manv useful functions which are necessarv to add Favourite Channel Change between TV and Radio channel list You can add not only TV channel s but also Radio channel s to Favourite channel list Press Wj to switch all channel list into TV or Radio channels Note You can also change into TV or Radio channel by pressing TV RADIO 5 5 button at remote controller Select a favourite channel list Vou can select vour desired Favourite channel list to edit Press g to display the Favourite channel list Then select your desired channel list using the w button and press the OK amp button Sort a channel list You can sort all TV or Radio channel lists by channel number or name for easy Favouri
15. haters Peen stet 4 Each button functions as follows Now Moves to the current programme where the cursor is located lt Moves to the previous programme or 30 minutes before gt Moves to the next programme or 30 minutes after 4 Moves to 2 hours before Moves to 2 hours after qDay Moves to one day before Day p Moves to one day after 5 Select 48 button and press the OK button to exit the Time Bar Note Guide provides programme information from the previous day to the next 7 days 3 Reserving Reserving a Watching You can automatically reserve your desired programme by selecting the scheduled programme and pressing the OK button 1 Select the desired programme and press the OK 2 button The following message will be displayed Sie 2 Select Yes and press the OK button to reserve the programme When a reservation has been completed the iJ icon is displayed on the reserved programme 3 Select No and press the OK button not to reserve the programme 4 If the channel is locked parental controlled or restricted by watching time you will be prompted to enter your Password Enter your Password to complete the reservation GB 41 6 Programme Guide 6 2 Finding a Programme You can find your desired programme by programme name or genre easily 1 Press the GUIDE 5 button x m Find Programme by Name 2 Press the BLUEbutton to display Find screen a es ae 3 Enter the programme
16. name directly using the keyboard displayed on the screen 4 When completing entering programme name select the Find button and press the OK button 5 Select By Genre and press the OK button to search programme by genre Note Select a w 4 p button and then press OK button to enter the programme name on the keyboard screen e If you select Previous or Next on the Keyboard displayed on the screen and press OK 4 W 4 b button the keyboard layout is switched 7 Select your desired genre and press the OK button 8 If you select your desired programme from the Found Programme List screen and press the OK 2 button you can watch the programme if it is on air or you can reserve your recording if it is the future programme If you want to find other programme you might press the BLUE button to display keyboard screen Note The Found Programme List may differ depending on the provided programme information GB 42 6 3 Viewing Reserved Programme You can add or edit reserved programmes by viewing the reserved programme list 1 Press the GUIDE 5 button 2 Press the YELLOW button to display the Schedule screen 3 Select the scheduled programme and press the OK 2 button to edit the reservation information 4 Select vacant list and press the OK button to add a new reservation schedule 1 Editing a Reserved Programme 1 Change the reserved Start Time using the 4 j button an
17. see em E GB 19 2 Connecting Hi Fi system 1 Connect the outputs on this receiver to corresponding inputs on your Hi Fi Audio or Dolby Prologic Decoder left audio out to left audio in right audio out to right audio in CA iA oe AN Receiver GB 20 3 Connecting Hi Fi system 2 If you wish to connect the optical S PDIF terminal and Dolby digital decoder to listen Dolby digital audio DTS audio or Multi Surround audio connect as follows Front speaker L AN Front speaker R Surround speakeril Center Subwoper Surround speaker R i GB21 2 Setup 2 2 Connecting for DVD player 1 Connection with Component Video V Pb Pr cable This method of transmitting pictures produces the highest qualitv as the video signal is split into its V brightness U and V red minus brightness blue minus brightness components Insert one end of a component video V Pb Pr cable into the red blue green cinch socket at the back of the DVD plaver and the other end into the component video input sockets on the TV set Note the socket and connector color on the DVD plaver must match the color of the sockets on the TV set Red Red Blue Blue Green Green If this is not the case the colors on the screen may be distorted or the picture may not be visible GB 22 2 Connection with S Video cable First vou set the SCART Output as S Video in the chapter 7 5 For the highest video qualitv connect to
18. time and all other items suitable for your environment Note Press the BACK or q button to save the changes and return to the previous menu Press the MENU or EXIT button to exit the Menu screen e You can easily select any item from the menu using the NUMERICAL 0 9 buttons 7 1 Parental Control You can set parental control for each programme and watching time You can also change your Password 1 Press the MENU button 2 Select the Preferences using the w button and press the OK or jp button 3 Select the Parental Control using the w button and press the OK or jp button 4 When prompting message is displayed to ask Password enter the Password using the NUMERICAL 0 9 button 1 Setting Censorship Censorship Classification allows you to block programmes according to the age level you have set 1 Select the Censorship Classification using the w button and press the OK or p button 2 Select your desired Age level using thea w button and press the OK button View All All programmes can be watched because there is no age limitation 7 Programmes are blocked for children under the age of 7 12 Programmes are blocked for children under the age of 12 15 Programmes are blocked for children under the age of 15 18 Programmes are blocked for children under the age of 18 Lock All Programmes are blocked without considering the age level Note You have to
19. 018 125 098 127 004 005 017 018 028 042 049 063 065 066 068 076 079 087 025 098 110 004 017 052 056 062 141 052 105 023 110 004 018 019 052 127 098 006 015 019 020 021 023 026 030 035 038 25 040 044 084 106 052 064 004 009 018 019 029 084 133 GB 64 Brand DAINICHI DANSA DAYTON DE GRAAF DECCA DENON DESMET DIXI DUAL DUAL TEC DUMINT DUMONT DVNATECH EB TELECOM ECTEC ELBE ELECTROBAND ELECTROHOME ELEKTA ELIN ELITE ELMAN ELTA EMERSON ENVISION ERRES EURO FEEL EUROMANN Code 064 018 004 009 019 108 066 018 028 129 035 098 003 004 018 126 097 063 127 007 009 063 105 081 116 056 080 106 110 071 018 040 064 098 106 127 004 009 019 038 049 050 051 051 053 054 055 056 067 072 074 075 085 015 018 071 071 Brand EUROPHON FERGUSON FIDELITY FINLADIA FINLUX FIRST LINE FISHER FORMENTI FRONTECH FUJITSU FUNAI FUTURETECH GALAXIS GBC GE EC GELOSO GENEXXA GIBRALTER GO VIDEO GOLDSTAR GOODMANS GPM GRADIENTE GRADIN GRAETZ Code 127 018 062 097 104 106 018 028 051 093 129 118 004 062 063 038 041 063 097 106 108 126 018 098 103 042 071 099 028 051 124 047 051 052 071 118 052 123 142 099 011 013 020 021 024 030 034 050 075 084 018 028 063 095 110 129 004 099 042 064 007 009 015 026 000 001 009 015 016 018 019 025 033 050 063 071 093 110 124 140 017 018 028 051 0
20. 11 Listening Mode Press the OPT gt button repeatedly to select your desired listening mode Note Listening mode can be different according to DVD title 2 12 Time display Press the TIME c button repeatedly to select your desired listening mode Total elapsed Displays the total elapsed time since the title has been playing Total remain Displays the total remaining time to be played Single elapse Displays the elapsed time for the currently playing chapter Single remain Displays the remaining time to be played for the currently playing chapter Note e The selected time play mode is also adjusted in the front panel e Total time on the screen is displayed as Total in the front panel Single chapter on the screen is displayed as Single in the front panel 2 13 Angle You can select the camera angle Press the ANGLE 4 button repeatedly to select your desired angle Note The number of angles can be changed according to the DVD GB 80 3 Playing a Audio CD 3 1 Playing Audio CD 1 Press the OPEN CLOSE button on the Front panel and insert a disc 2 Press the OPEN CLOSE button to close the disc loading tray 3 The main menu will be displayed to list all audio files in the disc as below 4 Select your desired item using the a w button and press the OK button The audio is played You can move by page using the PAGE PAGE button You can change play mode by
21. 18 007 015 042 095 099 139 004 005 049 071 117 071 042 094 099 102 106 124 127 015 016 019 Brand SAMSUNG SAMSUX SANDRA SANSEI SANSUI SANVO SBR Code 004 009 015 016 018 019 025 026 050 063 071 078 089 124 137 019 062 084 085 005 017 028 038 041 106 107 108 124 129 018 SCHAUB LORENZ 099 SCHNEIDER SCIMITSU SCOTCH SCOTT SEARS SEG SEI SEI SINUDYNE SELECO SEMIVOX SEMP SENTRA SHARP SHOGUN SHORAI 018 064 071 097 136 143 147 009 050 009 050 051 052 067 020 023 025 038 040 041 047 050 051 106 017 063 071 126 127 049 097 099 117 118 127 042 076 099 100 119 120 122 052 040 040 017 019 030 043 009 118 GB 69 12 Manipulating your TV using Remote Control Brand SIAREM SICATEL SIEMENS SIGNATURE SILVER SIMPSON SINGER SINUDYNE SKANTIC SKY SOGERA SOLAVOX SOLAVOX SONITRON SONOKO SONOLOR SONTEC SONY SOUND amp VISION SOUNDESIGN SOUNDWAVE SPECTRA SPECTRICON SQUAREVIEW SR2000 SSS STANDARD STARLITE STERN SUNKAI SUPERTECH Code 127 121 018 059 060 061 006 040 017 057 058 127 049 099 018 098 016 042 108 004 018 071 042 018 005 017 073 087 127 050 051 052 057 018 133 002 047 106 009 052 004 063 064 098 052 042 076 099 117 118 097 Brand SUPRA SUSUMU SYMPHONIC SYSLINE TADNDY TANDY TASHIKO TASHKO TATUNG TEC TECHLINE TECHNEMA TECHNICS TECHNISAT TECHNOL ACE TECH
22. 63 133 064 022 025 046 082 098 042 099 GB 65 12 Manipulating your TV using Remote Control Brand GRANADA GRANDIN GRUNDIG GRUNPY GRUNPY HALIEAX HALLMARK HANSEATIC HARLY DAVIDSON HARMAN KARDON HARVARD HCM HEMMERMANN HINARI HITACHI HUANYU HUSPI ELEKTRONIK HYPERVISION HYPSON HYPSON ICE ICES IMPERIAL INDESIT INDIANA Code 018 028 063 109 124 075 018 059 060 068 137 051 052 071 050 018 089 097 098 099 118 119 051 023 052 004 071 075 097 004 017 018 051 064 094 095 096 099 102 108 109 110 111 112 113 114 124 148 016 017 025 031 032 035 037 042 048 063 066 090 091 062 123 134 018 071 075 071 075 063 071 064 092 099 101 123 068 018 GB 66 Brand INFINITY INGEKEN INGELEN INNOHIT INNOVA INTEQ INTERBUY INTERFUNK INTERVISION ISUKAI ITT JACSON JBL JCB JEC JVC KAISUI KAMP KAPSCH KATHREIN KAWASHO KEC KENDO KENWOOD KINGSLEY KLH KLOSS KMC KONIG Code 023 139 042 028 124 018 007 071 018 042 095 099 018 063 071 127 144 064 042 099 108 129 023 137 040 017 022 045 054 004 062 063 064 075 062 042 095 099 089 062 077 052 018 099 117 119 127 009 015 062 124 012 033 004 005 017 018 042 061 068 Brand KORPEL KORTING KOYODA KTV Code 018 098 004 015 019 052 055 056 063 074 KUBA ELECTRONIC 097 LENCO LG LIESENK amp TTER LIFETEC LL
23. 99 106 108 143 008 029 042 099 106 118 052 038 044 070 030 043 018 049 051 067 085 097 098 118 016 028 063 064 071 124 064 016 028 124 017 018 059 063 087 089 093 097 098 099 102 108 117 118 099 063 071 000 020 021 022 023 024 026 030 035 036 038 040 042 043 050 065 068 070 079 099 062 098 004 GB 68 Brand PCE PEC PENNEY PHASE PHILCO PHILIPS PHONOLA PILOT PIONEER POLICOM POLYRON PORTLAND PRANONI PRINCE PRIMA PRINZ PRISM PROFEX PROLINE PROSCAN PROTEC PROTECH PROTON PULSAR QUASAR Code 040 106 108 001 102 008 009 011 013 015 016 019 020 021 025 026 034 040 050 016 009 010 012 014 015 023 035 057 058 085 123 007 008 009 010 011 012 013 014 018 019 023 089 110 124 138 018 098 009 015 019 042 044 068 071 009 019 029 099 040 106 124 021 004 119 015 020 099 127 004 018 063 071 002 050 007 009 110 124 021 024 043 070 Brand QUELLE QUESTA RADIO SHACK RADIOLA RADIOTONE RADIX RANK ARENA RCA REALISTIC REKORD REVOX REX RFT RHAPSODY R LINE ROADSTAR ROYAL LUX RTF RUNCO SABA SAGEM SAISHO SAKIO SALORA SAMBERS SAMPO Code 005 018 087 093 097 099 108 117 118 017 009 015 016 019 020 025 038 043 050 052 106 018 071 108 017 008 009 020 021 030 034 009 015 016 019 025 038 043 050 052 106 149 018 042 071 076 099 088 126 055 056 062 018 004 064 071 131 0
24. C 018 071 AIKO 029 AUDIOVOX 002 029 052 084 AKAI 015 099 109 124 AUMARK 026 AKURA 064 071 AUTOVOX 068 076 097 ALARON 051 055 062 BARCO 086 ALBA 004 017 018 064 123 BASIC LINE 004 064 ALLORGAN 118 BAUR 018 087 097 099 102 108 AMBASSADOR 049 BAVSONIC 052 AMPLIVISION 063 BEAUMARK 050 AMSTRAD 004 018 047 049 145 BEC 099 110 124 ANAM 003 004 052 BECRESE 040 099 108 109 110 ANAM NATIONAL 024 BELCOR 009 ANITECH 004 071 BELL amp HOWELL 006 038 106 ANITECH 071 BEON 018 ANSONIC 127 BINATONE 063 AOC 002 009 015 056 BLACKSTRIPE 040 GB 63 12 Manipulating your TV using Remote Control Brand BLACKSTRIPE BLACKSTRIPE BLAUPUNKT BLUE SKY BLUE STAR BOOTS BOSCH BAUER BPL BRADFORD BRINKMANN BRITANNIA BROCKWOOD BROKSONIC BROTHER BRUNS BSR BTC BUSH CANDLE CAPEHART CAPSONIC CARNIVALE CARREFOUR CARVER CASCADE CATHAY CCE CCI CENTURION CGE Code 106 108 059 060 061 064 075 063 098 075 052 123 062 009 002 067 085 071 126 093 118 064 004 017 018 064 075 093 099 117 015 025 057 124 071 015 017 023 046 004 018 063 018 078 115 018 101 123 Brand CIE CIMLINE CINERAL CITIZEN CLAIRTONE CLARIVOX CLARIVOX CLATRONIC CLATRONIC CME CONCERTO CONDOR CONIC CONTEC CONTINETAL EDISON CRAIG CRIPTOVISION CROSLEY CROSLEY CROWN CTC CURTIS MATHES CXC CYBERTON DAEWOO Code 133 004 117 029 084 015 019 025 026 029 040 057 074 1056
25. Channel Search For detailed information about Installation Wizard refer to 3 Installation Wizard GB 56 9 Software Update In order to maintain proper performance of this product it is essential to have the most up to date software The latest news and release of software versions may be found at Humax website http www humaxdigital com It is recommended that vou periodicallv check for the availabilitv of software upgrade Warning Vou can search after the setting of Manual Search Refer to 8 1 Automatic Search 9 1 OTA Over the Air OTA an abbreviation of Over the Air means that downloads the software where the manufacturer reserves the right to decide when and where to release through aerial Over the Air OTA is simply another alternative for downloading software versions However the manufacturer reserves the right to decide when and where this software update can take place by beaming latest software versions over the air via aerial The software update via aerial will only occur under the following circumstances 1 The equipment should have appropriate loader software Caution Please note that if you don t have normal loader software the equipment may not be updated or work after software update 2 The manufacturer decides to release software downloading via a designated aerial 3 The equipment must be tuned properly to the same aerial that the manufacturer uses 4 Update software when the quality of re
26. Digital Versatile Disc A new storage medium that combines the convenience of the compact disc with the latest digital video technology DVD video uses modern MPEG2 data compression technology that enables an entire feature film to be stored on a single five inch disc Programme Guide Electronic Programme Guide EPG A electronic programme guide EPG that comes with the broadcast to a particular satellite Note that every station fills the EPG differently or not so differences in the EPG are not necessarily receiver errors Frequency The number of cycles or events per one second which is expressed in the unit of hertz FTA Free To Air An unscrambled broadcast which you can view without additional payments to a service provider GB 100 MP3 MP3 files are highly compressed music files The data is compressed to 1 10 of the volume of the original audio material using a special process This means that 10 hours of music can be stored on a single CD OSD On Screen Display The function that displays the information about the monitor that the user needs or has to know on the screen directly OSD information includes brightness contrast tuning RGB adjustment and screen size and positions top left width and height and so on OTA Over The Air Means that software downloads where the manufacturer reserves the right to decide when and where to release them through satellite system SCART A 21 pin connector used f
27. OVTRON LOGIK LUMA LUXMAN LUXOR LXI M ELECTRONIC MAGNAFON MAGNASONIC MAGNAVOX MAJESTIC MANDOR MANESTH MARANTZ MARK MATSUI MATSUSHITA MC MICHAEL 071 133 146 018 028 071 118 124 025 018 071 016 000 006 099 025 068 094 099 102 124 007 020 023 038 040 050 106 004 018 042 063 097 127 127 106 010 012 014 015 017 023 051 057 058 110 006 071 063 071 098 117 015 018 023 089 018 004 005 018 049 063 092 097 117 021 070 110 Brand MEDIATOR MEGATRON MEI MEMOREX MEMPHIS MGA MIDLAND MINERVA MINUTZ MITSUBISHI MIVAR MOTOROLA MTC Code 018 002 035 050 109 056 004 006 025 026 033 036 038 050 070 071 106 124 009 015 036 039 050 007 016 019 020 021 034 068 011 009 017 030 036 039 050 068 062 024 030 009 015 025 026 056 062 MULTISTANDARD 127 MULTITECH MUTIMEDIA NAD NAONIS NATIONAL NEC NECKERMANN NEI NESCO NETSAT NIKKAI NIKKO NISATO NOBLEX 004 052 062 063 099 127 132 040 044 050 099 068 009 015 017 025 046 018 059 087 089 099 102 018 051 018 016 018 028 040 062 064 071124 007 015 020 029 038 040 050 1081 083 GB 67 12 Manipulating your TV using Remote Control Brand NOKIA NOSHI NTC OCEANIC ONWA OPTIMUS OPTIONICA ORION OSAKI OSAKI OSAKI OSAKI OSAKI OSAKI OSO OSUME OTTO VERSAND PALLADIUM PANAMA PANASONIC PATHE CINEMA PAUSA Code 071 094 095 096 0
28. P C button to stop playing Press the jp button to resume playing from where you stopped playing Pause Play Press the button to pause play Press the button again to resume playing 2 2 General Information Press the i button to display the information as below while playing a DVD Press the i button BACK button or EXIT button to hide the information displayed on the screen The following information is displayed Ed English Dolbv Digital 1 Channel Chapter 1 Title No Displavs the title number 2 Chapter No Displavs the chapter number 3 Play Time Information Displays full playing time and currently playing time of the Disc or chapter Time display format can be changed by the TIME button 4 Angle Displays total number of angles and the number of currently playing angles 5 Soundtrack Displays audio information 6 Repeat Mode Displays repetition of the currently playing chapter GB 75 2 Playing a DVD VIDEO Disc 2 3 Search You can move directly to your desired chapter title time marker Press the SEARCH button to change search mode Press the EXIT or BACK button to immediately hide search mode on the screen 1 Chapter Title 1 Press the SEARCH button repeatedly to select a chapter or title 2 Enter your desired chapter or title number using the NUMERICAL 0 9 button when your desired item is displayed If you enter more than the total ch
29. PAGE PAGE F button to move to channels by page Also you can enter your desired channel number using the NUMERICAL 0 9 button on the remote controller to move to the channel directly A Select your desired programme and press the OK 2 button Then vou can watch the programme if it is on air or you can reserve it if it is the following programme 5 Press the i 4 button in the selected programme to view Extended Information for the selected programme 1 Viewing Guide Information by Groups You can view programme information for desired channel list by groups 1 Press the GUIDE 5 button 2 Press the REDbutton to display the channel list group 3 Select your desired channel list group using the a w button to display the appropriate sub group 4 Move the cursor to the sub group using the jp button select your desired sub group using the a w button and then press the OK button 5 The Programme Guide for selected channel list is displayed GB 40 2 Viewing Programme Information Using Time Bar You can quickly search for your desired time zone using the Time bar 1 Press the GUIDE 5 button 2 Press the GREEN button to display Time Bar 3 Select the Time Bar button using the 4 button and m press the OK button to move as your desired amount kal PE SRE BTI of time If you press the button repeatedly the same ea operation is repeated N A TI irum tart 59 Premiere Movie z
30. Saving 1 Video CD Playback Control 2 Player Version 1 Country 2 Parental Level 3 Change Password GB 95 Appendix2 Trouble Shooting Before contacting your local service please make sure following instructions If the product does not work normally after completing the following trouble shooting please contact your local product distributor or service centre STB and DVD 1 No message is displayed on the front panel or product has no power Check the main power cable and check that it is plugged into a suitable power outlet Check whether the Power Switch is On 2 No picture Make sure that the product is in Operation Mode Make sure that the AV Cable is firmly connected to the TV Make sure that Antenna line is correctly connected to the equipment Check the brightness level of TV Check the channel is on air 3 Poor picture amp sound quality Install the antenna in a place where there is no obstacle Make sure there is no mobile phone or microwave oven near the equipment Use 75 2 coaxial cable to connecting TV and antenna 4 No or poor sound Check the volume level of the TV and Receiver Check the Mute status of the TV and product Press the Audio button to change the Sound Track type 5 Remote controller does not operate To control the equipment with the remote controller the remote controller s top end should directly point towards the receiving part of receiver s remote controller
31. WOOD TEKNIKA TELECO TELEFUNKEN TELEMEISTER TELETECH TELETON TELEVIDEON TENSAI TESLA TEXET THOMAS THOMAS THOMSON Code 025 064 010 012 014 015 023 057 058 080 047 018 124 028 030 042 063 064 110 017 063 002 018 024 028 063 124 063 133 127button 098 007 020 021 070 130 051 002 021 025 006 009 019 023 025 026 029 036 051 052 057 135 025 098 004 017 057 063 099 098 064 093 098 118 135 062 064 110 124 068 GB 70 Brand THORN TMK TOKAI TOMASHI TOSHIBA TOSONIC TOTEVISION TOWADA TRIUMPH TV TEXT UHER UHER ULTRA ULTRAVOX UNIVERSAL UNIVERSAL UNIVERSUM VECTRO RESEARCH VESTEL VICTRO VIDEOTECHNIC Code 018 028 040 087 107 108 110 112 128 129 025 049 050 124 075 017 026 038 040 069 106 108 056 019 099 127 049 069 089 098 127 081 124 127 011 013 018 071 015 018 012 013 Brand VIDEOTON VIDIKRON VIDTECH VISA VISION VOXSON VTQ WALTHAM WARDS WATSON WATT RADIO WEGA WHITE WESTINGHOUSE WORLD TECH YAMAHA YOKO YORK ZANUSSI ZENITH ZONDA Code 094 023 009 017 050 004 005 017 018 042 068 098 042 099 126 063 094 099 006 009 010 011 013 014 015 023 025 034 040 043 050 051 058 018 098 097 127 017 018 062 098 106 133 009 015 018 063 071 133 108 076 099 006 007 029 002 GB 71 DVD Player GB 72 Loading a Disc You can switch to DVD player mode b
32. age Mature Teenage Mature Audience Adult Always Restricted using the a w button and press the OK 2 button If Country set to USA select one option among Off G PG PG 13 R NC 17 X using the w button and press the OK button Note When you set to Unrestricted the all discs play without password 3 Password You can change the current password into new one 1 Select Change Password using the w button and press the OK or q button ae G 2 Enter New Password using the NUMERICAL 0 9 button and select OK and press OK button Emil bakar ml 3 Enter the New Password again to confirm the Verifv Password and select OK and press the OK button Note The Default Password is 0000 If vou have forgotten vour Password please contact vour local product distributor GB 93 Appendix1 Menu Map STB Preferences Edit Channels Installation System ii i E GB 94 1 Parental Control 2 Language Setting 3 Time Setting 4 Schedule 5 AN Control 6 UHF Tuning 7 Miscellaneous Settings 1 Edit Channel Lists 2 Edit Favourite Channels 3 Channel Change Mode 1 Automatic Search 2 Manual Search 3 Software Update 4 Default Setting 1 Status 2 Signal Detection DVD a Parental Control 1 Disc Menus 2 Disc Audio 3 Disc Subtitle 1 LPCM 2 Dynamic Range 3 Downmix Mode 1 TV Aspect 2 SCART Output 3 On Screen Info 4 Panel Display 5 Power
33. apter or title number the number entered is discarded In that case enter the chapter or title number again Press the OK 38 button to immediately move to the beginning of a selected chapter or title 1 Press the SEARCH button repeatedly to select time 2 Enter your desired time using the NUMERICAL 0 9 button when time is displayed If you enter more than the total play time the entered number is discarded In that case enter the time again 3 Press the OK button to move to the selected time immediately 1 Press the SEARCH button repeatedly to select Marker 2 Select your desired marker from the Marker list using the A or button and then press the OK button The chapter or title is played from the marked point 3 Select a marked point in the Marker list and press the CLEAR 5 button to delete the mark GB 76 Note If the marking list is full you cannot add a new mark and a Fully Marked message is displayed e Press the Marker MARKER button to mark while watching a channel 2 4 Skipping Chapter You can move to the beginning of the current chapter the next chapter or the previous chapter 1 Press the SKIP NEXT 5 button to move from the chapter currently playing to the next chapter 2 Press the SKIP PREVIOUS 255 button to move to the beginning of the chapter currently playing 3 Press the SKIP PREVIOUS 55 button again to move to the beginning of the previou
34. ave the changes automatically Note When switching to the Locked Channel you must enter the password to watch a programme 3 Delete a Channel Vou can delete the current channel while watching a programme 1 Press the OPT button 2 Select Delete using the w button and press the OK or p button 3 Select Yes in the confirmation message and press the OK button 4 Enter password using the NUMERICAL 0 9 button to delete the current channel 5 Channel List 3 types of channel lists are provided for easy and quick channel finding TV Radio The list of all TV channels with 2 subgroups one is sorted by channel number the other is sorted by channel name The list of all Radio channels with 2 subgroups one is sorted by channel number the other is sorted by channel name Favourite The list of the favourite channels with 5 subgroups that you can organise channels by your private taste 5 1 Displaying and Switching Channel List You can display channel list using LIST button and switch into other channel on the channel list 1 Note Select your desired channel using the w button and Enter the channel numeric directly using NUMERICAL Press the LIST button while watching a programme to display the channel list press the OK button to change the channel 0 9 button to move cursor into your desired channel And then press the OK button to change
35. button and press the OK or p button 1 TV SCART VCR SCART You can set TV VCR SCART Output 1 SelectTV SCART using thea w button and press the OK amp or p button 2 Select one option among a w CVBS S Video using the w button and press the OK button 2 VCR SCART You can set VCR SCART Output 1 Select VCR SCART using thea w button 2 Select one option among a w CVBS S Video using the OK or jp button 3 Audio Output Set the Audio Output 1 Select Audio Output using thea w button 2 Select one option a w Stereo or Mono using the OK or button 4 Screen Ratio You can set the aspect ratio of your TV 1 Select Screen Ratio using thea w button 2 Select one option w 4 3 or 16 9 using the OK or p button GB 50 5 Display Format You can select the Display Format according to TV Screen Ratio 1 Select Display Format a w button and press the OK or jp button 2 If the Screen Ratio is set to 4 3 you can select one from 16 9 Letterbox 14 9 Letterbox Centre Cutout using the w button and press the OK button 3 If the screen ratio is set to 16 9 this item will display Disable or Auto 6 Dynamic Range This function adjusts audio output of SCART RCA and RF cable with DOLBY DIGITAL When listening at a low volume Dynamic Range reduces the volume of loud sounds such as explosions etc and increases the volume of quiet sounds such as wh
36. by Digital sound Set this when listening at low volume in night If you connect to a TV with a RCA socket we will recommend Standard for user Minimum Heavy compression of Dolby Digital sound Set this when listening the TV by connecting by RF cable If you connect to a TV with a RF socket we will recommend Minimum for user 3 Downmix Mode You can set the downmix mode Select Downmix Mode using the w button and press the OK 27 or button You can select one option from Dolby Surround or Stereo Normal GB 89 4 Settings DVD part 4 3 Display You can set video display 1 Press the MENU button 2 Select Display using the w button and press the OK or p button Display 1 TV Aspect You can set the aspect ratio of your TV 1 Select TV Aspect using the w button and press the OK or jp button 2 Select one option among 16 9 Widescreen 4 3 Letter Box 4 3 Pan amp Scan using the a w button and press the OK button 2 SCART Output You can set the scart output 1 Select SCART Output using the w button and press the OK or jp button 2 Select one option among CVBS S Video RGB using the w button and press the OK 6 button CVBS S Video RGB If you set the YPbPr RGB switch which is located in the back of your receiver LPCM to YPbPr with setting scart output to RGB the video signal is not output to scart Please use the component terminal 3 On Screen Info
37. ceiving signal strength is high If the weather is not so good that the quality of receiving signal strength is not recommendable perform the software upgrade later Caution Please be careful to keep the power on and the power cord plugged in during software update If the power is off during software update it may cause fatal damage to the product e Please be careful not to pull out the Signal line co axial Cable during software update Update may be interrupted and the product may not work The product cannot work at all during software update It may take 5 10 minutes to update software e Scheduling operation cannot work during software update GB 57 9 Software Update 1 If new software is found when powering on 1 Amessage will be displayed to notify that new software is found 2 Select Yes and press the OK button to update the software 3 Starts downloading new software Please wait until the updated is completed 4 When completing the software update the equipment is automatically powered off and on again 2 If updating software from Menu 1 Press the MENU button 2 Select Installation using the w button and press the OK 22 or jp button 3 Enter Password using the NUMERICAL 0 9 buttons 4 Select Software Update using the w button and press the OK or jp button 3 Automatic Update You can set the product to find HUMAX software update site and update sof
38. d the NUMERICAL 0 9 buttons 2 Change the reserved End Time using the 4 j button and the NUMERICAL 0 9 buttons 3 Change the Repeat mode using the p button The options are Once Daily and Weekly A Select the Delete using the 4 button and press the OK button to delete the reserved programme 5 Select the Cancel using the 4 j button and press the OK button to cancel the editing 6 Select the Save using the q p button and press the OK button to complete the editing GB 43 6 Programme Guide 2 Adding a Reservation 1 Enter your desired Start Time using the 4 button and Enter your desired End Time using the button and the Enter your desired channel number using the NUMERICAL 0 9 button The channel name is automatically displayed by channel number the NUMERICAL 0 9 button NUMERICAL 0 9 button Select one of repeat mode options among Once Daily and Weekly using the 4 button 5 Select the Save button and press the OK button to complete entering 6 Select the Cancel button and press the OK button to cancel the reservation Note You can reserve up to 20 programmes If you desired programme is already reserved adjust the reservation appropriately Ilf the channel is locked or restricted by watching time you will be prompted to enter your Password to complete the reservation GB 44 7 Setting Preferences You can set censorship watching
39. dix5 Service and Support GB94 GB96 GB98 GB100 GB102 GB 11 This chapter describes detail instructions on the product and its accessories 1 1 Package Contents Please check all package contents before using your receiver RQ Remote Control 1 User s Manual 1 2 Batteries 2 Scart Cable 1 Note Since faults may occur if the remote control is being left without a battery for a long time always keep the battery inserted in the remote control GB 12 1 2 Front Panel 1 STANDBY Button Switches between Operation and Standby modes 2 DVD DTV Change mode between DTV and DVD 3 TV RADIO Switches between TV and Radio modes 4 CH CH Adjust the audio volume 5 Stop Stop play a disc 6 Play Pause Start playback Pause playback 7 Skip previous Return to the beginning of the current chapter track or skip back to the previous chapter track 8 Skip next Skip to the next chapter track 9 OPEN CLOSE Open and close the disc tray GB 13 1 Before Using the Receiver 1 3 Rear Panel IN 16 B ee KM oou am T z 1 ANTENNA IN Connects a antenna to a antenna cable 2 TV VCR Connects a RF signal from your receiver to RF ANT input jack on your TV or VCR 3 RS 232C Connects to your PC to upgrade product s software programme 4 S Video Connect your receiver to a TV or VCR that accepts S Video input 5 COMPONENT SELECT RGB If you select RGB yo
40. duct distributor GB 46 7 2 Language Setting You can set Language for Menu Audio and Subtitle 1 Press the MENU button 2 Selec Preferences using the w button and press the OK or p button 3 Select Language Setting using the w button and press the OK or jp button 1 Audio Subtitle Language Vou can set the language for Audio and Subtitle Default language is English 1 Select Audio Subtitle Language using the w button 2 Press the gt or OK button to display the available Language List 3 Select your desired language using the w button and press the OK amp button 2 Audio Priority You can select the priority of audio 1 Select Audio Priority using the w button 2 Press the OK or jp button to display the Language or Dolby Digital 3 Select your desired option and press the OK button Auto Subtitles are displayed automatically in the predefined subtitle language Manual Subtitles are displayed in the language when you select the subtitle language by pressing the Subtitle gt button at remote control 3 Subtitle Display You can select whether or not to display the Subtitle if provided 1 Select Subtitle Display using the w button 2 Press the OK or jp button Auto Subtitles are displayed automatically in the predefined subtitle language Manual Subtitles are displayed in the language when you select the subtitle language by pressi
41. e jp button and press the OK button 3 Lock Unlock Channels You can lock or unlock one or more channels 1 Move the cursor to the channel list using the button 2 Select your desired channel and then press the OK 2 button to lock unlock the channel s You can select multiple channels 3 Select Lock in the right using the jp button and press the OK button Note e Only if locked channel s is selected or all channels are locked Lock is switched into Unlock When you press Unlock locked channel is switched into unlocked channel Enter password using the NUMERICAL 0 9 button to watch locked channel 4 Select Unselect All Channels You can select unselect all channels at a time 1 Select Select Allin the right and press the OK button to select all channels 2 Select Unselect Allin the right and press the OK button to unselect all the selected channels GB 35 5 Channel List 5 4 Edit Favourite Channels You can edit Favourite channel or Favourite channel list 1 Press the MENU button 2 Select Edit Channels using the w button and press Miami mi the OK button g 3 Select Edit Favourite Channels using the w button and press the OK or jp button Note Press the BACK 6 or q button to save the changes and return to the previous menu Press the MENU or EXIT button to exit the Menu screen You can easily navigate all menu items usin
42. enter Password to watch the programme which is blocked by the age level GB 45 7 Setting Preferences 2 Setting Allow Watch Time You can block programmes according to the watching time for all the channels 1 Select the Allow Time Control using the w button and press the gt or OK button 2 Select Enable or Disable the Allow Time Control using the a w button and press the jp or OK amp button Disable You can watch whenever you want regardless of Allow Time Enable You can watch only while the time specified by Allow Time 3 When you have selected Enable set the Start and End Time using the NUMERICAL 0 9 buttons and press the OK button 4 If you wish to cancel the entered time select the Cancel button and press the OK button Note Once the setting has been completed you can watch programme only while the time specified by Allow Time Or you should enter the Password to watch any programme during unspecified time 3 Change Password Vou can change the existing Password into new one 1 Select Change Password using the w button and press the OK or gt button 2 Enter New Password using the NUMERICAL 0 9 button and select OK and press OK button 3 Enter the New Password again to confirm the Verify Password and select OK and press the OK button Note The Default Password is 0000 If you have forgotten your Password please contact your local pro
43. g the assigned NUMERICAL 0 9 button for each menu Press the MENU 2 2in order on the remote controller to select the Edit Favourite Channels menu The buttons for editing the Favourite channel list are described in the following table 2 Add Adds Favourite channel al Remove Removes from the Favourite channel Bi TV RADIO Switches between TV and Radio channel list ti Fav Group Changes Favourite channel list group Bi Move Moves the order of channel list within the Favourite channel list al Rename Renames the name of Favourite channel list ate Sort Sorts channels by number or name in all TV Radio channel list Unselect All Unselect all the selected channel GB 36 1 Add Remove favourite channels You can add favourite channel s to a specific Favourite channel list or remove the added favourite channel s from the list 1 Select Favourite Group using 2 Select your desired channel s in all TV Radio channel list and press jij to add Favourite channel s 3 Select your desired channel s in Favourite channel list and press Ij to remove Favourite channel s Note You can switch between TV and Radio channel list using TV RADIO 5 button at remote control or ayy 2 Move favourite channels You can move favourite channel to your desired location within the Favourite channel list This function is only changing the location without changing the channel number 1 Select Favourite Group using BE 2 Select your
44. ger the screen is more transparent 3 Option in CH List You can set the option of scrambled icon in the Option in CH List 1 Select the Option in CH List using the w button and press the OK or gt button 2 Select one option from On Off using the w button and press the OK button On Scramble icon display in the channel list Off Scramble icon disappear in the channel list GB 53 8 Installation 8 1 Automatic Search If your receiver is connected to the aerial and television you can automatically search channels without entering any other information 1 2 Select MENU button Select Installation using the w button and press the OK or p button Select Automatic Search from Installation menu using the A W button and press the OK or p button Search Wait while the receiver searches for the channels this may take a few minutes 1 During operating search the cursor is located at Stop Therefore if you press the OK button during searching the operation is stopped and the channels found until then will be displayed If search operation is successfully completed and the channel does not exist press the OK button and try to reset the search operation again if necessary You can delete unnecessary channels from the searched channels Select your desired channels to delete and press the OK 2 button Then select Delete and press the OK bu
45. hanges the subtitle language in DVD This part explains DVD function only 14 TIME Change time displav 15 PLAV CONTROL BUTTONS PLAY PAUSE Start playback Pause playback gt STOP Stop play a disc SKIP PREVIOUS ZOOM Return to the beginning of the current chapter or track or skip back to the previous chapter or track zoom down EB SKIP NEXT ZOOM Skip to the next chapter or track zoom up Fast Backward Slow Backward Fast backward a disc execute a backward slow playback when playing a DVD 69 Fast Forward Slow Backward Fast forward a disc execute a forward slow playback when playing a DVD 16 DVD FUNCTION BUTTONS ApB Repeat between A and B in DVD ZOOM PROGRAMME Enlarge the picture during DVD playback Edit playlist TITLE Displays the title menu MARKER Set bookmark in a DVD during playback REPEAT MODE Change repeat mode ANGLE PLAY MODE Change angle and play mode This chapter describes how to set up the receiver Select the most appropriate procedure depending on your requirements Note If you encounter any problem when setting up the receiver please contact your local product distributor 2 1 Connecting the Antenna for STB 1 Connecting TV and VCR with SCART Connect the cable of your TV aerial to the ANTENNA IN connector on the rear of the receiver SCART and co axial cable are connected as in the figure above a
46. have selected Enable enter the Channel No and Time using the NUMERICAL 0 9 buttons and select OK and press the OK button 3 Power Off You can set the time when the product is automatically powered off 1 Select Power Off using the w button 2 Select either Enable or Disable the Power Off using the w button and press the OK button Enable Uses the Power Off and sets the Power Off time Disable Not uses the Power Off 3 When you have selected Enable enter the Time using the NUMERICAL 0 9 buttons and select OK or jp button Note Once Power On Off is specified it is repeated everyday 7 4 Schedule Vou can reserve a programme to watch programme at vour desired time 1 Press the MENU button 2 Select Preferences using the a w button and press the OK or jp button 3 Select Schedule using the w button and press the OK 22 or p button 4 Reserved Pregoramme List is displayed on the screen To edit the existing reservation select your desired reservation and press the OK button To add a new reservation select a blank list and press the OK button Note For detailed information about Schedule refer to Chapter 6 3 GB 49 7 Setting Preferences 7 5 A V Control You can set Audio or Video Output Control 1 Press the MENU button 2 Select Preferences using the w button and press the OK or p button 3 Select AV Control using the w
47. he channel is not deleted by broadcasting company The channel is for data broadcasting Confirm if the channel is currently on air Cannot watch the channel in usual way The channel is scrambled This digital terrestrial receiver does not support the service that enables to descramble the scrambled channels The audio is not available The channel has signal but no Audio Press the Audio button to confirm if the channel has Audio GB 97 Appendix3 Specification amp Channel RF Loop through Output connector Tuner IEC Type IEC 169 24 male Frequency Range 48 5MHz to 226 5MHz VHF 470MHZ to 862MHz UHF MPEG Transport Stream A V Decoding Transport Stream 1Signal Level 10 to 70dBm Demodulation OFDM Mode 2K 8K MPEG 2 ISO IEC 13818 Transport Stream Specification Profile Level MPEG2 MP ML Video Input Rate 15 Mbit s Max 1Aspect Ratio 4 3 16 9 Letter box Video Resolution 720x576 720x480 Audio Decoding MPEG MusiCam Layer amp II A V amp Data In Out Audio Mode Single channel Dual channel Joint Stereo Stereo Flash Memory 4 Mbytes Graphics MPEG amp System Memory 16 Mbytes EEPROM 8 Kbytes Available Disc DVD Available Reading MP3 Audio CD VCD Photo CD CD R RW DVD R RW DVD R RW SVACD Video RCA SCART Video Output CVBS RGB S Video Audio R L RCA SCART Volume and Mute Contr
48. ignal Strength and Quality of the channel DATI SAET Aste Astas tnam GB 61 This product provides various games for user s entertainment 1 Press the MENU button 2 Select Games using the w button and press the OK or p button 3 According to the instruction displayed on screen you can enjoy the game using a w 4 gt and OK button Note Press the EXIT or BACK 69 button to exit the game Press the GAME c button to start directly GB 62 12 Manipulating your TV using Remote Control You can manipulate TV using the remote control provided by Humax Note This function may not be supported depending on TV model TV code setting Note While you are setting TV code please keep pressing TV button 1 Point remote control towards the remote control receiving parts of TV 2 Press the TV lt gt button and the TV button LED blinks once Keep pressing TV button for 3 seconds then TV button LED turn on Press three numbers of TV code using the NUMERICAL 0 9 button orderly Refer to the following Code for TV manufacturer 3 TV button LED blink twice when you detach your finger from the TV button 4 TV power turns on or off when the setting is completed Code for TV manufacturer Table Brand Code Brand Code A MARK 002 ARCAM 062 063 ABEX 016 ARCHER 002 ACTION 110 124 ASUKA 064 071 ACURA 004 ATLANTIC 098 ADMIRAL 030 042 076 099 123 AUDINAC 081 ADYSON 016 063 AUDIOSONI
49. in current playing track Note Press the SEARCH button repeatedly to select a Marker Select your desired marker from Marker list using the a W button and then press the OK button The track is played from the marked point Select a marked point in the Marker list and press the CLEAR 5 button to delete the mark If you press the MARKER button during playing a track it is immediately marked at the point If the marking list is full you cannot add a new mark and a Fully Marked message is displayed 3 5 Listening Mode Press Note the OPT Hc7 button repeatedly to select your desired listening mode If you change listening mode the sound is immediately changed into the selected option GB 84 3 6 Time Display Press the TIME c button repeatedly to select your desired listening mode Total Displays the total time of a disc Total elapsed Displays the total elapsed time since the disc has been playing Total remain Displays the total remaining time to be played for the disc Single Displays the total time of the current track Single elapsed Displays the elapsed playing time of the current track Single remain Displays the remaining time to be played for the currently playing track Note The displayed time mode on the screen is also adjusted in the front panel 3 7 Fast Playing 1 Press the FORWARD C button to increase the forward playing speed 2 Press the FORWARD
50. into the selected channel Select On by going to MENU Preferences Miscellaneous Settings Option in CH List to display scramble icon in the channel list Select OFF by going to MENU Preferences Miscellaneous Settings Optoin in CH List to display only channel list without scramble icon If there are multiple channels press the PAGE PAGE 1 0 button to move by channel Whenever you press the TV RADIO 5 button while the channel list is displayed the channel list will be switched between TV and Radio channel list GB 32 5 2 Changing Channel List Group You can select channel list by group 1 Press the jp button while the channel list is displayed to view the group list 2 Select your desired channel group using the w button to display its sub groups 3 Press the OK or jp button select your desired sub group using the w button and then press the OK button 4 The channel list for the selected sub group is displayed Note The sub group of Favourite channel list may exist or not depending on your configuration e If Within the Current Channel List option is selected from MENU Edit channels Channel Change Mode menu you can only change programme within the selected channel list using the P P 7 while your watching a programme GB 33 5 Channel List 5 3 Edit Channels You can edit all channels or each channel by channel list group 1 Press the MENU bu
51. ispered dialog 1 SelectDynamic Range using thea w button and press the OK or jp button 2 Select one option among a w Maximum Standard Minimum using the w button and press the OK button Maximum No compression of Dolby Digital sound Standard Light compression of Dolby Digital sound Set this when listening at low volume in night If you connect to a TV with a RCA socket we will recommend Standard for user Minimum Heavy compression of Dolby Digital sound Set this when listening the TV by connecting by RF cable If you connect to a TV with a RF socket we will recommend Minimum for user 7 Downmix Mode You can set the downmix mode 1 Select Downmix Mode using the w button and press the OK or button 2 You can select one option from Dolby Surround or Stereo Normal GB 51 7 Setting Preferences 7 6 UHF Tuning You can set the UHF Tuning channel 1 Press the MENU button 2 Select Preferences using the w button and press the OK or p button 3 Select UHF Tuning using the w button and press the OK or jp button 1 UHF Channel You can select UHF Channels for the TV The Channel range and Frequency change according to PAL Standard 1 Select UHF Channel using the w button and press the OK or jp button 2 Select channel range based on the following channel criteria using the w button and press the OK button CH21 CH69 PAL I G for Europe
52. m the type of power source indicated on the marking label If you are not sure of the type of power supplied to your home consult local power company Disconnect the receiver from the mains before you start any maintenance or installation procedure OVERLOADING Do not overload a wall outlet extension cord or adapter as this may result in electric fire or shock LIQUIDS The receiver should not be exposed to any liquids such as dripping or splashing In addition no objects filled with liquids such as vase shall be placed on the apparatus CLEANING Disconnect the receiver from the wall outlet before cleaning Use a light damp cloth no solvents to dust the receiver VENTILATION The slots on top of the receiver must be left uncovered to allow proper airflow to the unit Do not stand the receiver on soft furnishings or carpets Do not stack electronic equipments on top of the receiver ATTACHMENTS Do not use any unsupported attachments as these may be hazardous or cause damage the receiver CONNECTION TO THE AERIAL Disconnect the receiver from the mains before connecting or disconnecting the cable from the aerial Failure to do so can damage the aerial CONNECTION TO THE TV Disconnect the receiver from the mains before connecting or disconnecting the cable from the aerial Failure to do so can damage the TV EARTHING The aerial cable must be buried in the ground The buried cable of the system must co
53. mply with SABS 061 GB 5 Safety and Warning 10 LOCATION 1 Place the receiver indoors to avoid exposing it to lightening rain or sun Do not place it near a radiator or heat register Make sure it has more than 10 cm clearance from anv appliances susceptible to electromagnetic influences such as TV and VCR Do not block these openings with anv object and do not place the product on a bed sofa rug or other similar surface If you place the product on a rack or bookcase ensure that there is adequate ventilation and that you have followed the manufacturer s instructions for mounting Do not place the product on an unstable cart stand tripod bracket or table where it can fall A falling product can cause serious injury to a child or adult and serious damage to the appliance LIGHTNING STORM or NOT IN USE Unplug the product from the wall outlet and disconnect the aerial during a lightning storm or when left unattended and unused for long periods of time This will prevent damage to the unit due to lightning and power line surges 12 EXTRANEOUS OBJECTS Do not insert anything through the openings in the unit where they can touch dangerous voltage point or damage parts 13 REPLACEMENT of PARTS When the replacement parts are required be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part Unauthorised substitutions ma
54. ng Auto 1 4 1 8 1 16 and 1 32 using the w button and press the OK button GB 55 8 Installation 5 Network Search If specified frequency channel information and other channel information are provided together the channel which belongs to other frequency channel is also searched Select one option between Enable and Disable using the w button Note You can search after the setting of Manual Search Refer to 8 1 Automatic Search 8 3 Default Setting Default Setting restores the receiver to the default settings Warning Please note that once you perform Default Setting all data such as Channel List and User Configured data are deleted To perform Factory Default 1 Press the MENU button 2 Select Installation using thea w button and press the OK or p button 3 Enter Password using the NUMERICAL 0 9 button 4 Select Default Setting using the a w button press the OK gt or p button 5 Select Yes and press the OK button to restore all setting to Factory Default Select No and press the OK or BACK 69 button to return to the previous menu 6 Confirm again to start loading default setting Enter Password using the NUMERICAL 0 9 button to perform restoring 7 When completing the default setting press the OK 2 button to automatically run the Installation Wizard When default setting is completed Installation Wizard is automatically displayed which helps
55. ng the Subtitle gt button at remote control GB 47 7 Setting Preferences 3 Subtitle Font You can select the Subtitle font 1 Select Subtitle Font using the w button 2 Press the or OK button to display the Variable or Fixed option 3 Select your desired option and press the OK button Variable Uses the horizontally variable Subtitle Font Fixed Uses the fixed Subtitle Font 7 3 Time Setting You can specify the current time and Power On Off time 1 Press the MENU button 2 Select Preferences using the a w button and press the OK 2 or p button 3 Select Time Setting using the w button and press the OK or p button 1 Setting Current Time You can set the GMT Offset for current time 1 Select GMT Offset using the w button 2 Press the OK or button to display GMT list GMT is changed by from 30 minutes to 1 hour 3 Select your GMT offset using the w buttons and press the OK button The current time is set automatically whenever GMT Offset changes The default item is Auto If GMT Offset is Auto it is automatically set depending on your country GB 48 You can set the time when the product is automatically powered on 1 Select Power On using the w button 2 Select either Enable or Disable the Power On using the OK or jp button Enable Uses the Power On and sets the Power on time Disable Not uses the Power On 3 3When you
56. nguage 4 5 Change a Audio Language If the current programme is available in multiple audio languages you can select the language that you wish to listen in 1 Note Select your desired audio language using the a w button Select Audio Direction left right stereo using the q p gt Press the EXIT or SOUNDTRACK gt button to exit Press the SOUNDTRACK gt button to display soundtrack list to change Audio immediately button the soundtrack list you can select your desired default audio language by selecting MENU Preferences Language Setting Audio Language GB 27 4 Basic Operation 4 6 Programme Information l plate Programme information is always displayed for a specific period of time whenever you switch channels You can view the programme information by pressing the i 4 button while watching a programme Press the EXIT button to hide the l plate 1 General Information General Information is displaved as follows on the screen 25 CNN International i Financial News fojl eM OR E Tv 1 Channel number and channel name 2 Programme name 3 Icons Displayed only if this programme is reserved Represents parental level It indicates the minimum level of ages that the programme is targeted at Displayed only when the channel is a locked channel Displayed only when the channel is a scrambled channel Displayed only when subtitle information is available Di
57. ol Resolution 20 bits DAC MAX 2Vrms S PDIF Digital Audio Output Fiber Optic Resolution 20 bits RS 232C Transfer Rate 115 200 bps 3 pin Socket type GB 98 Power Supply Input Voltage 90 250V AC 50 60Hz Type SMPS Power Consumption Max 35W Stand by Power lt 5W Protection Physical Specification 1Separate Internal Fuse The input should be protected against lighting Size 420mm X 75mm X 300 mm Weight Net Around 4 8Kg Operating Temperature 0 C to 45 C Storage Temperature 10 C to 70 C GB 99 Appendix4 Glossary Component Video Y Pb Pr This method of transmitting pictures produces the highest quality as the video signal is split into its Y brightness U and V red minus rightness blue minus brightness components The signal can also be sent as interlaced or as progressive scan Dolby Digital Dolby Laboratories standard for transmitting 5 1 channels Five full value channels are transmitted in this acoustic playback system A further channel is used for low frequencies effects The loudspeakers are arranged front left front middle rear left and rear right This system is currently the most common system and is used in cinemas DTS Digital Theater Systems DTS are trademarks of Digital Theater Systems Inc Transmission standard for 5 1 channels from Digital Theater Systems Inc This is the second most wide spread after Dolby Digital DVD
58. om Open Local Time in Dubai GMT 4 9 00 20 00 Saturday Thursday close on Friday Support Language English Arabic Humax Hotline Germany Germany 01805 778 870 0 12 Min Other Countries 49 1805 778 870 0 12 Min International Call Charge Open Local Time in Germany GMT 1 8 00 20 00 Monday Friday 8 00 18 00 Saturday Support Language Deutsch English Humax BTCI Hotline Premiere Model Germany 01805 778900 0 12 Min Austria 0900 900633 0 33 Min For hardware repair please refer to support website Homepage or HCSA GB 103 www humaxdigital com DVD Player Di HNDV1000T100GB
59. ontrot GB 87 4 Settings DVD part 4 1 Language You can set Language for Menu Audio and Subtitle 1 Press the MENU button 2 Select Language using the w button and press the OK amp or Stereo Normal 1 Player Menus Disc Menus Disc Audio Disc Subtitle Language You can set the language for Menu Audio and Subtitle Default language is English 1 Select Player Menus Disc Menus Disc Audio Disc Subtitle Language using the a w button 2 Press the OK or jp button to display the available Language List 3 Select your desired language using the w button and press the OK button Disc Menus Set the language of the Disc title Disc Audio Set the audio language of the DVD disc Disc Subtitle Set the subtitle language of the DVD disc GB 88 4 Settings DVD part 4 2 Audio You can set Audio 1 Press the MENU button 2 Select Audio using the a w button and press the OK or p button 1 LPCM You can select digital audio output according to the type of audio system you use Select LPCM using the w button and press the OK or jp button PCM Set when connecting to an audio system without a Dolby Digital DTS or other special decoder 2 Dynamic Range You can set the dynamic range Select Dynamic Range using the w button and press the OK or gt button Maximum you can set the dynamic range to maximum Standard Light compression of Dol
60. or connection of this product VCR and TV Also called Euroconnector or Peritel connector S PDIF Sony Philips Digital Interface format Standard format for digital audio output It outputs audio signals directly as digital audio signals without changing into analog signals because conversion into analog signals can degrade signal quality S Video This is used to transmit the brightness signal Y signal and color signal C signal separately GB 101 Appendix5 Service and Support You can get information such as a troubleshooting guide software upgrades and product support guide from the following web sites and call center Hotline Please try to contact to your local dealers first when you have any problem Web site and e mail Homepage http www humaxdigital com http www humaxdigital com Deutsch http www humaxarabia com HCSA Humax Customer Service Area Software Download Information and Technical Q amp A http Awww humaxdigital com hcsa http Awww humaxdigital com Deutsch hcsa E mail Technical Q amp A tech info humax digital co uk techinfo humax digital de callcenterME humaxdigital com Webmaster humaxdigital com GB 102 English Deutsch Arabic English Deutsch Europe amp North Africa Germany Middle East Asia amp Other area Call Center Humax Middle East Call Center Dubai UAE Tel 971 0 4 359 2323 Open 9 00 20 00 close on Friday E mail callcenterME humaxdigital c
61. ot all channels are found press the OK button and try to reset the search operation again if necessary 3 You can delete any unwanted channels from the list of found channels Select your desired channels to delete and press the OK button Then select Delete and press the OK button To delete all channels select Select All to select all channels select Delete and press the OK button 4 After completing the Channel Search and deleting unwanted channels select Save to save the changes When completing Channel Search you can enjoy digital television Warning If you exit the Install Wizard without fully completing the channel searching procedures you may not watch any broadcasting normally In this case you can use the Installation Menu to configure your receiver as you like GB 25 4 Basic Operation This chapter describes functions such as switching channel volume control and basic features for watching programmes 4 1 Switching Channel You can switch the current channel using one of the following methods 1 Press the CH CH button 2 Enter your desired channel numeric using the NUMERICAL 0 9 buttons to move to the channel directly 3 Press the TV RADIO 5 button to switch between TV channel and Radio channel Note You can switch channel using Programme Guide or Channel List Please refer to Chapter 5 and 6 for more information 4 2 Volume Control 1 Press the V V
62. pressing the PLAY MODE button repeatedly You can also change repeat mode by pressing the REPEAT MODE button repeatedly Note You can play tracks in the same way as with a disc Please refer to chapter 2 2 Playing a Title 3 2 Detail Information If you select MP3 file on the Main Screen press the i button to display its detailed information You can press the i 4 button BACK button or EXIT button to hide the information displayed on the screen and return to main screen Note This is only available for MP3 files GB 81 3 Playing a Audio CD You can see current status of your audio player at a glance The following information is displayed Bob Marley Tren strong What a Il Loving You 6 steelheart 67 Whitney Houston Greate 68 Boyz 2 Man its so hard t amp Playlist 9 CelinDion My Heart Will Fo g 1 Track No or Displays the track number 2 Play Status Displays the play status 3 Time Display Displays the currently playing time of an audio CD 4 Listening Mode Displays listening mode 5 Play Mode Displays play mode 6 Repeat Mode Displays repetition of the currently playing track GB 82 3 3 Playlist Menu 1 Press theLIST button while playing an Audio Disc to display Playlist menu 2 Press the a w button to select your desired Playlist menu 3 Press the OK or jp button to move to sub menu or select an option Note If Playlist is On the Track Number i
63. s chapter Note Press the SKIP NEXT lt 5 or SKIP PREVIOUS 5 button to display the number of the chapter currently moving on the top right of the screen 2 5 Repeat Mode You can repeat the currently playing chapter title or disc 1 Press the REPEAT MODE button to display current repeat mode during playing 2 Press the REPEAT MODE button repeatedly to change repeat mode in the order of Chapter gt Title gt Disc gt Off Note Select Off to disenable repeat mode GB 77 2 Playing a DVD VIDEO Disc 2 6 Repeat a section of disc You can set the sections to repeatedly switch between each other 1 Press the A p B G button while playing a disc to set the repeat point to A 2 Press the A p B G 2 button repeatedly to repeat playing between Section A and B 3 Play the setting start and end section repeatedly 4 lf the A p B setting is displayed on the screen press the A gt BCD button to release the setting If the A p B setting is not displayed on the screen press the Gs button to display the screen setting and then press the button again to release the setting 2 7 Fast Playing Press the FORWARD C button to increase the forward playing speed Press the FORWARD C button to increase the backward playing speed Each time you press the FORWARD or BACKWARD C button the playing speed options are rotated as below Forward X2 gt X4 gt X8 gt x16 gt normal play g
64. s displayed in the assigned order in the Playlist and the Disc in Repeat Mode is disabled Edit Playlist Edits the playlist Refer to 3 10 to edit Select your desired tracks and press the OK button Press the BACK 6 or EXIT button to return to the Playlist Add All Tracks to Playlist Adds all tracks on the audio disc to the playlist Enable Playlist The playlist is set to On and track s on the playlist is are played Disable Playlist The playlist is set to Off and all tracks on the audio disc are played Delete Playlist All tracks on the playlist are deleted and the playlist is enabled 3 4 Search You can directly move to your desired place Press the SEARCH button to change search mode 1 Track 1 Press the SEARCH button to select a track 2 Enter your desired track number using the NUMERICAL 0 9 button If you enter more than the total number the number entered is discarded In that case enter the track number again 3 Press the OK c button to move to the beginning of selected track immediately GB 83 3 Playing a Audio CD 1 2 Press the OK button to move to the selected time Press the SEARCH button repeatedly to select time Enter your desired time using the NUMERICAL 0 9 button when time is displayed If you enter more than the total play time the entered number is discarded In that case enter the time again immediately Note Time moves to the appropriate point with
65. splayed only when there is any teletext information BHOOD Digtal Displayed only when the programme is a dolby digital one Displayed when the channel supports MHEG al Displaved when the channel supports data channel GB 28 4 Current time 5 Detail programme information displayed if detailed programme information is provided 6 Channel looping mode and Channel List Name if you select Within the current channel list by selecting MENU Edit channels Channel Change Mode the Icon of Channel looping mode is displayed And channel list which you selected is displayed 7 Programme broadcasting time and progress bar displays programme playing time and progress bar 8 Next programme Information displayed if next programme information is provided Press the gt button to display the next programme information Note If there is no available programme information programme information is not displayed 2 Detail Programme Information You can see detailed information about the current programme Press the i button where l plate is displayed to view detailed information Note e Press the i 4 button again to hide the information box e If the Detail information is more than one page use a Ww button to move to the previous or next page GB 29 4 Basic Operation 4 7 Option List You can view and confirm detailed information about the current channel and change the information in necessary
66. t x2 gt x4 Backward X2 gt X4 gt X8 gt x16 gt normal play gt x2 gt x4 Note The DVD subtitle is displayed as forward x2 If you increase the playing speed faster than this the subtitle is not displayed e Press the gt button to play at normal speed GB 78 2 8 Slow Motion 1 Press the PAUSE button to temporarily stop the currently playing DVD disc 2 Press the FORWARD C button to play in slow motion Each time you press the FORWARD C button the slow motion speed options are rotated as below Slow motion 5 gt 8 gt 1 2 gt 20 gt 30 gt 40 gt 50 gt 60 gt 70 gt 80 gt 90 gt normal play gt 5 gt 8 Note Press the gt button to play at normal speed 2 9 Zooming in and out 1 Press the ZOOM 5 button to zoom in or out Press the ZOOM 5 button to turn On Press the ZOOM 3 button to turn Off 2 Press the ZOOM 5 or ZOOM 2233 button to zoom in or out Press the a w 4 button to move within the zoomed in out screen 2 10 Subtitle Audio If the disc provides several types of subtitles or audio information you can change the subtitle or audio Press the SUBTITLE lt gt or AUDIO gt button repeatedly to select your desired subtitle audio language Note Subtitle audio languages can be changed according to the DVD title e Select Off in Subtitle to not display a subtitle GB 79 2 Playing a DVD VIDEO Disc 2
67. t using the 4 or W button and press the OK button GB 86 4 Settings DVD part 1 Add Track Select your desired track from All and then press the OK button or directly enter your desired track number using the NUMERICAL 0 9 button to add to the Playlist 2 Delete Track 1 When Allis highlighted press the ANGLE 4 button to move the highlight into Playlist 2 Select your desired track and press the CLEAR 5 button to delete it 3 Play Track When you complete editing the playlist press the PLAY PAUSE button to play tracks in the assigned order on the Playlist Note Directly enter your desired track number in playlist using the NUMERICAL 0 9 button and press the OK button to add to the Playlist 3 11 MP3 Disc Scan In case of MP3 Disc you can scan the total play time of the mp3 file exists in the disc 1 Press the DISC MENU 5 button to scan an MP3 Disc 2 Press the OK or jp button to start scanning 3 The total time is displayed when completing scanning Note If the tray is open and then closed the scanning process is reset You can set all other items suitable for your environment Note Press the BACK or q button to save the changes and return to the previous menu Press the MENU or EXIT button to exit the Menu screen Dicptoy You can easily select all menu items using the assigned numerical button for each menu Bd die Parental C
68. te channel searching If channel lists are sorted by channel number BBJ is displayed When you press this button all the channel lists are sorted by name Or if channel lists are sorted by channel name BE is switched into j j Press this button to order channels by number Unselect all the selected channels Press j button to unselect all the selected channel GB 38 5 5 Channel Change Mode You can change the channel either in the group or in the entire groups while watching a programme 1 Press the MENU button 2 Select Channel Change Mode using the a w button and press the OK or gt button 3 Select All Channels or within the current channel list using the w button and press the OK button Note When Within the current channel list is selected you can only change the channel within the current channel list using the CH CH buttons GB 39 6 Programme Guide The Programme Guide displays programme information about each channel based on the date and time You can also schedule your recording using the information given Note Press the GUIDE button to exit the Guide screen 6 1 Viewing Programme Guide Information You can view programme information for all channels 1 Press the GUIDE 5 button 2 Move to previous or next programme within the same channel using the button 3 Move to another desired channel using the w button If there are multiple channels use
69. ted Select Guard Interval If the information is not known then Auto can be selected Note How to setting parameters in Manual Update is the same as how to set parameters in Manual Search Refer to Manual Search Select Search and Press the OK button to search software It is displayed whether or not New Software exist If new software does not exist press the OK button to return to the Manual Update Menu Select Yes and press the OK button to start updating Select NO and press the OK button to return to the previous menu Select Later and press the OK button to update later That means the update menu display as soon as you turn on the receiver next time Performs Software Update Please wait until it is completed When completing the software update the product is automatically powered off and on again GB 59 9 Software Update 5 Software Auto Detecting and Time You can specify the software detecting time If the receiver powers on during software auto detecting Detecting will stop 1 Select Software Auto Detecting from Software Update screen using the w button 2 Select Enable or Disable using OK or p button whether or not setting the software detecting time automatically 3 When you select Enable you can set the detecting time in the Auto Detecting Time 9 2 S W Update from PC You can connect your receiver to the PC directly and update
70. tton Select Edit Channels using the w button and press Note Select Edit Channel lists using the w button and You will be prompted to enter your password Enter your the OK or jp button press the OK or p button password using NUMERICAL 0 9 button Press the BACK 69 or q button to save the changes and return to the previous menu press the MENU or EXIT button to exit the menu screen You can easily navigate all menus using the assigned numeric for each menu Press the MENU 2 Tin order at remote control to select Edit Channel Lists menu 1 Select a Channel Group Vou can select the channel list group to edit TV or Radio and the subgroups from the channel search for aerial and scramble channel lists are included as channel list groups 1 Note Select your desired Channel List Group using the a W Press the OK or jp button in group to display Channel List Group button and press the OK button Press the TV RADIO 5 button to move to TV or RADIO channel list directly For editing Favourite channel list move to MENU Edit Channels Edit Favourite Channels menu GB 34 2 Delete Channels You can delete one or more channels 1 Move the cursor to the channel list using the button 2 Select your desired channel and then press the OK 2 button to delete the channel s You can select multiple channels 3 Select Delete in the right using th
71. tton To delete all channels select Select All to select all channels select Delete and press the OK 27 button When completing Channel Search and deleting unnecessary channels select Save to save the changes GB 54 8 2 Manual Search You can search channels manually by searching parameters if you know the MUX information 1 Select MENU button 2 Select Installation using the w button and press the OK or p button 3 Select Manual Search from Installation menu using the A W button and press the OK or p button 4 Select Channel Frequency Mode Guard Interval or Network Search using the w button and press the OK or p button 1 Channel Number Enter your desired frequency channel to search When entering frequency channel value the appropriate frequency value is entered Select one of channel using the w button press the OK button 2 Frequency Enter the your desired frequency to search directly When entering frequency the appropriate channel for the entered frequency is automatically displayed on Channel Enter frequency using the NUMERICAL 0 9 button and press OK button Required for Channel Search If you don t know the value please select Auto Select among Auto 2k and 8k using the w button and press the OK button 4 Guard Interval Required for Channel Search If you don t know the value please select Auto Select one option amo
72. tware automatically 1 Select Automatic Update using the w button and press the OK or button Automatically search for new software 2 When detecting update software the following result is displayed If new software is not found by Automatic use Manual Update 3 Select Yes and press the OK button to start updating Select No and press the OK button to return to the previous menu without updating Select Later and press the OK button to update later That means the update menu display as soon as you turn on the receiver next time 4 When completing the software update the product is automatically powered off and on again GB 58 4 Manual Update You can perform Manual Update only if you know MUX information of software update correctly Among the Software Update Sites of HUMAX the software search operation is performed only for the satellites that have been set to Enable in Installation Antenna Setting Satellite Alternative menu and that have all other Antenna Setting correct 1 Select Manual Update from Software Update screen using the a W button and press the OK or p button Select the channel number which provides update software You can also enter the frequency instead of channel number in which updated software is provided Select Mode If the information is not known then Auto can be selected Select Mode If the information is not known then Auto can be selec
73. u can connect to video audio L and R YPbPr If you select YPbPr you can connect your receiver to a TV or VCR that accepts high quality video input 6 TV SCART Connects a TV SCART cable 7 VCR SCART Connects a VCR SCART cable 8 VIDEO Connects to your TV or VCR and output Video signals 9 AUDIO L R Connects to your TV or VCR and output Audio signals 10 S PDIF Outputs the digital audio signals S PDIF GB 14 1 4 Remote Control STB RCU Note This remote control can also control your TV To set the remote control for your TV please refer to Chapter 12 GB 15 1 Before Using the Receiver STB 1 TV Turn on the TV 2 STB Turn on the STB 3 TV RADIO Switches between TV and Radio modes 4 WIDE Set the Display Format 5 NUMERICAL BUTTONS Enters a TV Radio channel number or menu option number 6 LIST Displays the channel list in DTV 7 COLOR BUTTONS Select color keys for interactive applications 8 MENU Displays the main menu in DTV 9 ARROW BUTTONS Changes the channel or move the cursor to the up down left or right menu option 10 BACK Returns to the previous menu and screen 11 V 4 Adjusts the audio volume of TV 12 SOUNDTRACK Displavs the Soundtrack 13 0PT OPTION Displays the channel attributes during watching a programme GB 16 14 DVD DTV Change mode between DTV and DVD 15 STANDBV Switches between Operation and Standbv modes
74. vour TV using the S Video socket 1 Connect the S Video connector on the rear of the plaver to the corresponding connector on the TV using the S Video cable 2 Connect the audio left and right channel sockets on the plaver rear panel to the corresponding sockets on vour TV or Stereo svstem e GB 23 2 3 Powering On 1 Connect the power cord of the receiver to a wall outlet ors 2 Turn on the power button located at the left on the back of the receiver Make sure that the Standby LED indicator is turned on Red 3 Power on by pressing the STANDBY 7 button at Remote Controller or the STANDBY 7 button at the front of the receiver GB 24 3 Loading 3 1 Booting Mode When powering on your receiver for the first time the mode selection will automatically appear Select DTV or DVD using the a w or DVD DTV 5 and press the OK button Please wait for booting the DTV or DVD Note If you don t select a specific mode then the previous mode will be automatically selected 3 2 Installation Wizard When using the DTV mode for the first time a Channel Search will be performed automatically You can run the Installation Wizard in Default Setting 1 During operating search the cursor is located at Stop Therefore if you press the OK button during searching the operation is stopped and the channels found so far will be displayed 2 Even after the search operation is complete and no or n
75. y pressing the DVD STB button while in DTV mode 1 Press the OPEN CLOSE button to open the disc loading tray which is located at the front of your receiver 2 Put the selected disc on the tray and check that it is located correctly 3 Press the OPEN CLOSE button to close the tray 4 The player is reading the disc Please wait GB 73 2 Playing a DVD VIDEO Disc You can recognise the DVD Video disc by the logo Each disc has one or more chapters Your receiver moves within the titles or chapters to access easily and conveniently S E e DVD VIDEO Disc 1701058585 TITLE1 TITLE 2 Chapter 1 2 3 Chapter 1 2 3 Buttons Marker Marking CD A B repeat C Zoom on off CD CD C D D 65 GB 74 Play Pause Fast backward Slow motion Fast forward Slow motion Stop Skip previous Frame by frame Skip next Frame by frame 2 1 Playing a title Press the OPEN CLOSE button on the Front panel and insert a disc Press the OPEN CLOSE button to close the disc loading tray Press the button to play the disc Disc menu is displayed Select your desired item using the a w lt gt or NUMERICAL 0 9 button and press the OK S button As the disc plays the display shows the current chapter or title and the elapsed playing time 6 Return to menu when the title is fully played Or Pe Nos 7 Press the jp button to move to the next title Stop Resume Press the STO
76. y result in additional damage to the unit Warning 1 Follow these directions in order not to damage the power cord or plug Do not modifv or process the power cord or plug arbitrarilv Do not bend or twist the power cord too much Make sure to disconnect the power cord with the plug held Keep heating appliances as far as possible from the power cord in order to prevent the cover vinvi from melting Follow these directions Failure to follow one of them mav cause electrical shock Do not open the main body Do not insert metals or inflammable objects inside the product Do not touch the power plug with a wet hand Disconnect the power cord in case of lightening Do not use the product when it is out of order If you continue to use the product when defective serious damage can be caused toit Make sure to contact your local product distributor if the product is out of order Please do not insert metal or alien substance into the slots for the modules and smart cards In doing so can cause damage to the STB and reduce its life span GB 6 Only for DVD player 1 Cleaning discs Some malfunctions frozen or distorted and broken sound for example are due to dirt on the disc To avoid such problems you should clean your discs regularly Dirty discs should be cleaned with a soft cloth Always wipe from the middle to the edge W0 Note Do not use any solvents such as benzine thinner alcohol commercially
77. your software by transferring the new software from the PC Follow these steps to download new software from PC to this product 1 Download new software file HDF files equivalent for this product model from our website into your computer http Awww humaxdigital com Download and install download tool file from our website into your computer Connect your PC to this product with RS 232C serial cable Execute installed download tool and then follow the instructions contained the download tool Press the STANDBY 7 button to make this product operating a woh GB 60 10 System Information You can view all system information signal strength and quality 1 Press the MENU button 2 Select System using the w button and press the OK or p button 10 1 Status You can view System information 1 Select Status using the w button and press the OK or p button 2 Confirm the information about Hardware version Software version Loader version System ID and Update Date 10 2 Signal Detection You can view the signal strength and signal quality receiving for the channel that is currently on AV 1 Select Signal Detection using the w button and press the OK or gt button 2 Displays the channel name frequency mode and guard interval of terrestrial frequency and currently tuned channel number and its name which current channel belongs to and the graphs and percentage of S

Humax DV-1000T User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents