Huawei HG622 User's Manual
Contents
1. E O es a ee E LAN4 LAN3 LAN2 LANI RESET POWER 1 Telephone jack 2 Splitter 3 Telephone 4 Computer on the wall 5 Power adapter 6 T connector 7 Microfilter 8 Fax machine 2 4 Powering On To power on the HG622 press the ON OFF button on the side panel of the HG622 After you power on the HG622 the DSL indicator blinks for less than three minutes which indicates that the HG622 is being activated Later the DSL indicator turns solid on The POWER indicator is also solid on which indicates that the HG622 is working properly 3 Setting the Internet Access Parameters The HG622 supports VDSL2 uplink and High Speed Packet Access HSPA uplink through Huawei HSPA data card Realizes dynamic mutual backup of voice and data services through the DSL link and HSPA link 3 1 Configuring the HSPA uplink When the HG622 is working through the Huawei HSPA data card you need to install the Huawei HSPA data card on the HG622 so that your PC can connect to the Internet through HSPA uplink To create a HSPA uplink connection do as follows Step 1 Log in to the Web based configuration utility 1 Launch the Internet Explorer on your computer Enter http 192 168 1 1 in the address bar and then press Enter 2 In the displayed dialog box enter the user name and the password and then click Login By default both the user name and the password are admin After t2. Notice Some features of the product and its accessories described herein rely on the software installed capacities and settings of local network and may not be activated or may be limited by local network operators or network service providers Thus the descriptions herein may not exactly match the product or its accessories you purchase Huawei Technologies Co Ltd reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation NO WARRANTY THE CONTENTS OF THIS MANUAL ARE PROVIDED AS IS EXCEPT AS REQUIRED BY APPLICABLE LAWS NO WARRANTIES OF ANY KIND EITHER EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE MADE IN RELATION TO THE ACCURACY RELIABILITY OR CONTENTS OF THIS MANUAL TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW IN NO CASE SHALL HUAWEI TECHNOLOGIES CO LTD BE LIABLE FOR ANY SPECIAL INCIDENTAL INDIRECT OR CONSEQUENTIAL DAMAGES OR LOST PROFITS BUSINESS REVENUE DATA GOODWILL OR ANTICIPATED SAVINGS Import and Export Regulations Customers shall comply with all applicable export or import laws and regulations and will obtain all necessary governmental permits and licenses in order to export re export or import the product mentioned in this manual including the software and technical data therein Contents 1 Warnings and Precautions
3. HUAWEI HG622 Home Gateway User Guide wW HUAWEI TECHNOLOGIES CO LTD HUAWEI Wz HUAWEI HUAWEI HG622 Home Gateway V100R001 User Guide Issue 02 Date 2010 06 25 Part Number 202193 Huawei Technologies Co Ltd provides customers with comprehensive technical support and service Please feel free to contact our local office or company headquarters Huawei Technologies Co Ltd Address Huawei Industrial Base Bantian Longgang Shenzhen 518129 People s Republic of China Website http www huawei com Email terminal huawei com Copyright Huawei Technologies Co Ltd 2010 All rights reserved No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co Ltd The product described in this manual may include copyrighted software of Huawei Technologies Co Ltd and possible licensors Customers shall not in any manner reproduce distribute modify decompile disassemble decrypt extract reverse engineer lease assign or sublicense the said software unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders under licenses Trademarks and Permissions Wy Wy Huawer HUAWEI and are trademarks or registered trademarks of Huawei Technologies Co Ltd Other trademarks product service and company names mentioned are the property of their respective owners
4. The next time when you power on your computer you can surf the Internet without any configuration Using the PPP Dial Up Software on Your Computer If you select this method for accessing the network you need to install and configure the dial up software on your computer In addition you need to perform dial up Operations on your computer upon each startup To configure the HG622 and your computer for the network access do as follows Step 1 Set the working mode of the HG622 to Bridge For details refer to the procedure for enabling the embedded dial up function described in Step 3 in section Using the Embedded PPP Dial Up Software on the HG622 Note that Bridge is selected from the Connection mode drop down list box Step 2 Install and configure the PPP dial up software on your computer The PPP dial up software is pre installed on certain computer operating systems To create a dial up connection do as follows taking the Windows XP operating system as an example 1 Choose Start gt All Programs gt Accessories gt Communications gt Network Connections 2 Click Create a new connection in Network Tasks to display the New Connection Wizard window and then click Next Select Connect to the Internet and then click Next Select Set up my connection manually and then click Next 5 Select Connect using a broadband connection that requires a user name and password and then click Next 6 Enter the name as desired of
5. and can be displayed after the terminal is restarted Step 1 Step 2 Step 3 Ensure that the terminal and other devices such as telephones or fax machines are connected to telephone lines through a splitter For details about how to install a splitter see the related description in the manual Ensure that telephone lines are properly connected If the telephone lines are improperly connected the stability of the network connection is affected Check the positions of your terminal and your computer Ensure that they are far from electric appliances such as microwave ovens refrigerators or cordless telephones that generate strong magnetic or electric fields 17 If the problem persists contact your service provider What can I do if sometimes the terminal cannot access the Internet through a WLAN connection or if the WLAN connection is unsteady Step 1 Step 2 Step 3 Step 4 Step 5 Check the positions of your terminal and your computer Ensure that they are far from the electric appliances such as microwave ovens refrigerators or cordless telephones that generate strong magnetic or electric fields Place your terminal in an open area Although radio signals can pass through obstacles the transmission effects of WLAN radio signals are affected if radio signals pass through too many obstacles such as cement or wooden walls Place your computer close to your terminal If your computer is far from yo
6. configuration utility To change the IP address do as follows Step 1 Choose Basic gt LAN in the navigation tree Step 2 Select the DHCP page Step 3 Enter a new IP address as desired in the IP address text box Then enter a subnet mask in Subnet mask Step 4 Click Submit to save the settings Jn To log in to the Web based configuration utility after you change the IP j address successfully you need to launch the Internet Explorer and then enter the new IP address in the address bar Ensure that the IP address of the computer is in the same network segment as that of the HG622 so that the computer can access the Web based configuration utility 5 5 Downloading Files Through the USB Port After a portable storage device is connected to the USB port on the rear panel of the HG622 you can configure the HG622 as a File Transfer Protocol FTP client Through the HG622 the files on the FTP server can be downloaded to the removable storage device To download files through the HG622 do as follows Step1 Choose Advanced gt USB Port Step2 In the User name and Password text boxes enter the user name and the password Step 3 In Download URL and Port text boxes enter the Uniform Resource Locator URL address and port used for downloading files from the FTP server Step 4 Click the Device drop down list box and then select the storage device partition used for saving downloaded files Step 5 Inthe Local path text box enter t
7. it power it off and then remove all the cables connected to it Use a clean soft and dry cloth to clean the device shell Do not use any cleaning agent or spray to clean the device shell 2 Connecting the Cables and Powering On 2 1 Simple Connection If your telephone line is used for the broadband network access only and if you do not need to use a telephone take the following figure as a reference for connecting the cables aie 1 Telephone jack on the wall 2 Computer 3 Power adapter Jn If the wireless network function is used on the HG622 for the network A access you do not need to connect the cables 2 2 Connecting One Telephone If your telephone line is used for both the broadband network access and a telephone connection take the following figure as a reference for connecting the cables PHONE MODEM 1 Telephone jack on the wall 2 Splitter 3 Telephone 4 Computer 5 Power adapter 2 3 Connecting Multiple Telephones If your telephone line is used for the broadband network access telephone connections and fax connections take the following figure as a reference for connecting the cables
8. routing mode e The WAN connection is set up e No data is being transmitted The HG622 works in routing mode e The WAN connection is set up e Data is being transmitted e The HG622 works in bridge mode or in routing mode e No WAN connection is set up e The wireless network function is enabled e No data is being transmitted through the WLAN The wireless network function is enabled e Data is being transmitted through the WLAN The wireless network function is disabled A wireless connection is set up between the HG622 and a wireless client through the WPS function This state lasts 300s The HG622 is attempting to set up a wireless connection with a wireless client such as a PC on which a wireless network adapter is installed through the WPS function This state lasts no more than 120s The WPS function is disabled The Ethernet connection is set up Data is being transmitted through the Ethernet interface The Ethernet connection is not set up The USB connection is set up Data is being transmitted through the USB port The USB connection is not set up 20 7 2 Interfaces and Buttons aan fa 10 E 9 O 8 ON OFF e DSL LAN4 LAN3 LAN2 LANI RESET POWER 123 45 6 7 No Interface or Description Button l DSL Used to connect HG622 to t
9. the dial up connection in ISP Name and then click Next 7 Select Anyone s use or My use only and then click Next 8 Enter the user name and password provided by the network operator and used for the dial up connection and then click Next 9 Select Add a shortcut to this connection to my desktop and then click Finish An icon for the dial up connection is displayed on the desktop of your computer oe You need to perform the preceding operations only once for creating a network connection After the network connection is created to access the network double click the icon for the dial up connection and then click Connect in the displayed dialog box 4 Configuring the Wireless Network Connection If a wireless network adapter is installed on your computer you can connect you computer to the HG622 through a wireless connection i The hardware installation methods and driver installation methods of wireless 3 network adapters provided by different companies vary from each other For details see the installation guide provided by the wireless network adapter provider Setting Up a Wireless Connection Through the WPS Button The HG622 supports the Wi Fi Protected Setup WPS function If your network adapter also supports the WPS function you can use the WPS function to set up a wireless connection between your PC and the HG622 quickly To set up a wireless connection do as follows Step 1 Enable the wireless network
10. up a wireless connection between your PC and the HG622 manually To manually set up a wireless connection use either of the following methods Use the tool provided by your network adapter For details see the user guide of your network adapter e Use the wireless configuration software provided by the operating system of your PC This section takes Windows XP as an example and describes how to set up a wireless connection between your PC and the HG622 manually do as follows Step 1 Enable the wireless network function and set the wireless network name and access password of the HG622 1 Log into the Web based configuration utility 2 In the navigation tree on the left of the Web based configuration utility choose Basic gt WLAN Select the Enable WLAN option Enter a wireless network name in the SSID text box Select WPA PSK from the Security drop down combo box Enter an access password in the WPA pre shared key text box Select AES from the WPA encryption drop down combo box Click Submit to save the settings Oo Oy a Step 2 Enable the wireless configuration service provided by Windows XP 1 Right click My Computer and then choose Manage from the shortcut menu 2 In the Computer Management window choose Computer Management Local gt Services and Applications gt Services 3 From the services listed in the right pane of the Computer Management window right click Wireless Zero Configuration and then choo
11. 4 Technical Specifications 1 Warnings and Precautions To use the device properly and safely read these warnings and precautions carefully and strictly observe them during operation Unless otherwise specified the term device refers to the device and its accessories Basic Requirements During storage transportation and operation of the device keep it dry and prevent it from colliding with other objects Do not dismantle the device In case of any fault contact an authorized service center for assistance or repair Without authorization no organization or individual can change the mechanical safety or performance design of the device When using the device observe all applicable laws and regulations and respect the legal rights of other people Environmental Requirements for Using the Device Before connecting and disconnecting cables stop using the device and then disconnect it from the power supply Ensure that your hands are dry during operation Keep the device far from sources of heat and fire such as a heater or a candle Keep the device far from electronic appliances that generate strong magnetic or electric fields such as a microwave oven or a refrigerator Place the device on a stable surface Place the device in a cool and well ventilated indoor area Do not expose the device to direct sunlight Use the device in an area with a temperature ranging from 0 C to 40 C Do not block the openings on th
12. ccssssccccsssssssccsssssscccssssscccssssssscsessssnees 1 2 Connecting the Cables and Powering ON ssscccsssccsssssscesssseccsssscees 4 2 1 Simple COnmectiOn sastivverscsccsciieacmcuietns ea eerste AA A E 4 2 2 Connecting One Telephone cccccccccscccessscceessecceesseecesseecesseeceesseeeesseeeens 5 2 3 Connecting Multiple Telephones ccecccccessecceesscecessseceesseecesseecesseeeens 6 LEP ON HNO OTE ERE CRE TUN TTT ER TEU UR CRE TCR TPR REET STENT ORR NEE TEE NCEE EAN TERE 7 3 Setting the Internet Access Parameters ccssscccsssssccssssscessssccsssscees 7 3 1 Configuring the HSPA Uplink sscsvsieaweanieniemomiimnweuns dieses T 3 2 Configuring the DSL plik siseses ricorsi E Ea EaR 8 4 Configuring the Wireless Network Connection csssscccssssssseeesees 10 gt Basic COMMPUFAUON sisa oan eaaa Er EEA E A Gs 12 5 1 Changing the Administrator Password cccccccccccsssseccessseceeessseeeeeeseeees 12 5 2 Enabling or Disabling the Wireless Network Function cccccesseeee 13 5 3 Changing the Wireless Network Name and the Access Password 13 5 4 Changing the Login IP Address scsi cde adie ee 14 5 5 Downloading Files Through the USB Port cccccccccceessseceeeesseeeeeeneeees 14 50 Restore Default Seine Sieira r eA AAEE 15 CF Sear Sr oD CT eRe rE 15 TEN d TE EE EE E E 19 PeT Mde Oroa a a a a a 19 7 2 Interfaces and Buttons 7 3 Default Settings 7
13. e device with any object Reserve a minimum space of 10 cm around the device for heat dissipation Do not place any object such as a candle or a water container on the device If any foreign object or liquid enters the device stop using the device immediately power it off remove all the cables connected to it and then contact an authorized service center During thunderstorms power off the device and then remove all the cables connected to it to prevent it from getting damaged due to lightning strikes Precautions for Using Wireless Devices When using the device ensure that the antenna of the device is at least 20 cm away from all persons Do not use the device where using wireless devices is prohibited or may cause interference or danger e The radio waves generated by the device may interfere with the operation of electronic medical devices If you are using any electrical medical device contact its manufacturer for the restrictions on the use of the device e Do not take the device into operating rooms intensive care units ICUs or coronary care units CCUs Areas with Inflammables and Explosives e Do not use the device where inflammables or explosives are stored for example in a gas station oil depot or chemical plant Otherwise explosions or fires may occur In addition follow the instructions indicated in text or symbols e Do not store or transport the device in the same box as inflammable liquids gase
14. el for over six seconds after the HG622 is powered on and then release the button What can I do if I cannot access the Internet through the terminal Step 1 Check whether the POWER indicator on the terminal is solid on If the POWER indicator is off perform further checks as follows 1 Ensure that the terminal is turned on 2 Ensure that electricity comes from the socket and that the power input from the socket meets the requirements described on the label of the terminal power adapter If the voltage is unsteady for example if the voltage is too high or too low do not use the terminal Wait until the voltage restores to its normal level and then use the terminal 15 Step 2 Step 3 Step 4 Step 5 3 Ensure that the terminal is properly connected to the socket through the power adapter If the POWER indicator is still off contact an authorized maintenance center After powering on the terminal wait for about three minutes Then check whether the DSL indicator on the terminal is solid on If the DSL indicator blinks for a long time perform further checks as follows 1 Ensure that telephone lines are properly connected Pay special attention to the connections between the telephone lines and the splitter 2 Ensure that the terminal or telephone lines are far from the electric appliances that generate strong magnetic or electric fields Replace telephone lines when necessary If the DSL indicator still blink
15. function and set the wireless network name and access password of the HG622 do as follows taking the authentication type WPA PSK as an example 1 Log in to the Web based configuration utility of the HG622 2 In the navigation tree on the left of the Web based configuration utility choose Basic gt WLAN Select the Enable WLAN option Enter a wireless network name in the SSID text box Select WPA PSK from the Security drop down combo box Enter an access password in the WPA pre shared key text box Select AES from the WPA encryption drop down combo box Click Submit to save the settings Step 2 Press the WPS button of the HG622 to enable the HG622 to enter the WPS negotiation state CP a Step 3 Enable the WPS negotiation function of the wireless network adapter on your PC within two minutes and then wait for a moment typically 10s and at most 120s 10 The WPS indicator of the HG622 becomes on from the blinking state indicating that the HG622 is connected to your PC through the WLAN This state lasts 300s Then the WPS indicator turns off fr If the WPS indicator does not blink it indicates that the WPS function cannot be i enabled Note that the WPS function can be used only when the wireless network function is enabled and the wireless network security mode of the WLAN is set to WPA PSK or WPA2 PSK Setting Up a Wireless Connection Manually If your network adapter does not support the WPS function you can set
16. ging the Administrator Password For safety reasons or to make the password easy to remember you can change the administrator password for login after logging in to the Web based configuration utility To change the password do as follows Step 1 Step 2 Step 3 Step 4 Log in to the Web based configuration utility Choose Maintenance gt Account in the navigation tree to display the system management page Select admin from the User name drop down combo box Enter the Current password and the New password Then enter the new password again in the Confirm password text box for confirmation 12 Step 5 Click Submit to save the settings After you change the password successfully the current page jumps to the page for logging in to the Web based configuration utility To log in to the Web based configuration utility enter the new password and then click Submit A If you forget the user name or password that has been changed you can f restore the default settings of the HG622 by pressing and holding the RESET button for over six seconds Then the user name and password that are used for logging in to the Web based configuration utility are restored to default values After you restore the default settings however your customized data is lost Therefore use this function with caution 5 2 Enabling or Disabling the Wireless Network Function You can quickly enable or disable the wireless network function by pressing t
17. he WLAN button on the HG622 To enable the wireless network function press and hold the WLAN button for over one second and then release the button You can disable the wireless network function in the same way The WLAN indicator shows whether the wireless network function is enabled In addition you can enable or disable the wireless network function through the Web based configuration utility To enable or disable the wireless network function do as follows Step 1 Log into the Web based configuration utility Step 2 Inthe navigation tree on the left choose Basic gt WLAN Step 3 Select or not select the Enable WLAN option Step 4 Click Submit to save the settings 5 3 Changing the Wireless Network Name and the Access Password To change the name and access password for the wireless network do as follows taking the authentication type WPA PSK as an example Step 1 Log into the Web based configuration utility Step 2 In the navigation tree on the left choose Basic gt WLAN Step 3 Enter the new wireless network name in the SSID text box Step 4 Select WPA PSK from the Security drop down combo box 13 Step 5 Enter the new access password in the WPA pre shared key text box Step 6 Select AES from the WPA encryption drop down combo box Step 7 Click Submit to save the settings 5 4 Changing the Login IP Address To make the login IP address easy to remember you can change the IP address after logging in to the Web based
18. he MODEM interface on the splitter or to the telephone jack on the wall 2 5 LANI LAN4 Used to connect Ethernet devices such as PCs and switches 6 RESET Used to restore the factory settings Power on the HG622 press and hold the RESET button for at least 6 seconds and then release the button Note After you restore the default settings your customized data is lost Therefore use this function with caution 7 POWER Used to connect the power adapter 8 ON OFF Used to power on or power off the HG622 21 No Interface or Button 9 WLAN 10 WPS 11 USB Description Used to enable or disable wireless network function quickly Used to set up a wireless connection between the HG622 and a wireless terminal easily and safely Used to connect a USB device such as a Huawei HSPA data card 7 3 Default Settings Parameter Setting IP address of the LAN interface 192 168 1 1 Subnet mask of the LAN interface 255 255 255 0 User name used for logging in to the Web based admin configuration utility Password used for logging in to the Web based admin configuration utility DHCP server function Enable Wireless network function Enable 7 4 Technical Specifications Item Power supply Power consumption Ambient temperature for operation Relative humidity for operation Dimensions L x W x H Specification 12 V DC 1 5 A lt 18 W 0 C to 40 C 32 F to 104 F 5 to 95 non condens
19. he path used for saving downloaded files Step 6 Click Download 14 Jn After files are downloaded you can view file downloading records on the Download History tab 5 6 Restoring Default Settings You can quickly restore the default settings of the HG622 by pressing the RESET button on the rear panel To restore the default settings press and hold the RESET button for over six seconds after the HG622 is powered on and then release the button In addition you can restore the default settings of the HG622 through the Web based configuration utility To restore the default settings through the Web based configuration utility do as follows Step 1 Log in to the Web based configuration utility and then choose Maintenance gt Device in the navigation tree to display the reboot page Step 2 Click Restore Default Settings After the preceding operations the current page jumps to the login page You can log in to the Web based configuration utility by entering the default user name and password that are admin 6 FAQs How can I quickly enable or disable the wireless network function Press and hold the WLAN button for over one second and then release the button to enable or disable the wireless network function The WLAN indicator shows whether the wireless network function is enabled How can I quickly restore the default settings of the terminal To restore the default settings press and hold the RESET button on the rear pan
20. he user name and the password are verified you can access the Web based configuration utility Step 2 Click Basic gt WAN in the navigation tree to display the WAN Connection Page Step 3 Click the connection whose access type is UMTS Step 4 Select Enable for WAN connection Step 5 Enter the APN and the Dial number that are provided by the network operator in the APN text box and the Dial number text box Step 6 Enter the user name and password in the User name and Password text boxes that you can configure Step 7 Click the Submit button to finish the UMTS settings If you want to verify the PIN code of your SIM card then do as follows 7 Step 1 Click Advanced gt PIN in the navigation tree to display the PIN Page Step 2 Enter the original PIN number in the PIN text box Step 3 Click the Submit button to finish the settings on the PIN Page J Use the default values for the other parameters In general they do not need 5 to be configured 3 2 Configuring the DSL uplink By configuring the HG622 and your computer you can choose any of the following methods to surf the Internet e Using the Embedded PPP Dial Up Software on the HG622 Using the PPP Dial Up Software on Your Computer Using the Embedded PPP Dial Up Software on the HG622 If you select this method for accessing the network the HG622 starts to set up a dial up connection automatically after the startup You can access the network after you power on your com
21. ing 173 mm x 48 mm x 146 5 mm 22 Item Specification Weight About 350 g Standards VDSL2 G 993 2 Annex B PSD Mask standards TU G 994 1 G hs ITU G 992 5 G dmt bitplus Annex A standard ITU G 992 3 G dmt bis Annex A standards TTU G 992 3 G dmt bis Annex L ADSL ITU G 992 1 G dmt Annex A standards TTU G 994 1 G lite ANSI T1 413 Issue 2 WLAN 802 11b 802 11 g and 802 1 1n 2 4 GHz standard Wireless transmission 802 11b 1 Mbit s 2 Mbit s 5 5 Mbit s 11 Mbit s tate 802 11g 6 Mbit s 9 Mbit s 12 Mbit s 18 Mbit s 24 Mbit s 36 Mbit s 48 Mbit s 54 Mbit s 802 11n 6 5 Mbit s 13 Mbit s 13 5 Mbit s 19 5 Mbit s 26 Mbit s 27Mbit s 39 Mbit s 40 5 Mbit s 52 Mbit s 54 Mbit s 58 5 Mbit s 65 Mbit s 78 Mbit s 81 Mbps 104 Mbit s 108 Mbit s 117 Mbit s 121 5 Mbit s 130 Mbit s 135 Mbit s 162 Mbit s 216 Mbit s 243 Mbit s 270 Mbit s 300 Mbit s 23 HUAWEI TECHNOLOGIES CO LTD Huawei Industrial Base Bantian Longgang Shenzhen 518129 People s Republic of China www huawei com Part Number 202193
22. ovided by your network 16 Step 6 Step 7 Step 8 operator Check whether you can use the PPP dial up software to dial successfully If you cannot use the PPP dial up software to dial successfully perform further checks as follows 1 Stop the PPP dial up software and then power off the terminal After five minutes power on the terminal and then use the PPP dial up software to dial again 2 Restore the default settings of the terminal If the problem persists contact your network operator Check whether the proxy server of the Web browser is correctly configured Take the Internet Explorer installed on a computer that runs Windows XP as an example To check whether the proxy server of the Web browser is correctly configured do as follows 1 Launch the Internet Explorer 2 Choose Tools gt Internet Options 3 Inthe Internet Options dialog box click the Connections tab 4 In the Local Area Network LAN settings group box click LAN Settings 5 In the Proxy server group box of the Local Area Network LAN Settings dialog box ensure that the Use a proxy server for your LAN These settings will not apply to dial up or VPN connections check box is cleared Try to access multiple Web sites to check whether the terminal can access these Web sites If the terminal still cannot access Web sites contact your network service provider What can I do if Web pages often cannot be displayed during Web page browsing
23. puter You do not need to install any special dial up software on your computer or perform dial up operations on your computer To configure the HG622 and your computer for the network access do as follows Step 1 Log in to the Web based configuration utility of the HG622 Step 2 Configure the ATM PVC 1 In the navigation tree choose Basic gt ATM 2 Enter VPI VCI provided by the Internet Service Provider ISP 3 Select EoA from the DSL link type option button 4 Click Submit Step 3 Set WAN parameters 1 In the navigation tree choose Basic gt WAN 2 Select a PVC from the Layer2 interface drop down combo box A e The name of this PVC should begin with atm e The DSL link type of this ATM PVC should be EoA Select Enable for WAN connection Select a service from the Service list drop down list box Select a LAN interface from the Port binding check box Select Route from the Connection mode drop down list box Select PPPoE from the Connection type option button Enter the User name and Password provided by the ISP Click Submit Pa cei A A eles Step 4 Set LAN parameters 1 In the navigation tree choose Basic gt LAN 2 Set the IP address and Subnet mask of the LAN connection 3 Select Enable for DHCP server and then set the corresponding parameters 4 Click Submit After you complete the preceding settings you can surf the Internet You need to perform the preceding operations on a computer once only
24. s or explosives Accessory Requirements e Use only the accessories supplied or authorized by the device manufacturer Otherwise the performance of the device may get affected the warranty for the device or the laws and regulations related to telecommunications terminals may become null and void or an injury may occur Do not use the power adapter if its cable is damaged Otherwise electric shocks or fires may occur e Ensure that the power adapter meets the specifications indicated on the device nameplate e Ensure that the power adapter meets the requirements of Clause 2 5 in IEC60950 1 EN60950 1 and it is tested and approved according to national or local standards Safety of Children Keep the device and its accessories out of the reach of children Otherwise they may damage the device and its accessories by mistake or they may swallow the small components of the device causing suffocation or other dangerous situations Maintenance If the device is not used for a long time power it off and then remove all the cables connected to it If any exception occurs for example if the device emits any smoke or unusual sound or smell stop using the device immediately power it off remove all the cables connected to it and then contact an authorized service center Do not trample pull or overbend any cable Otherwise the cable may get damaged causing malfunction of the device Before cleaning the device stop using
25. s and does not turn solid on contact your network operator Check whether the LAN indicator of the terminal is on If the LAN indicator is off perform further checks as follows 1 Ensure that the network adapter of the computer is enabled 2 Ensure that the network cable between the terminal and the computer is properly connected Remove and then insert the network cable or replace the network cable when necessary If the LAN indicator is still off contact an authorized maintenance center Check whether the driver for the network adapter is properly installed Take a computer that runs Windows XP as an example To check whether the driver for the network adapter is installed do as follows 1 On the desktop right click My Computer and then choose Manage 2 In the navigation tree of the Computer Management window choose Device Manager 3 In the right pane of the Computer Management window click Network adapters to view the information about the network adapter of the computer If no network adapter is found or if a question mark or an exclamation mark is displayed next to the icon of the network adapter you can infer that the driver for the network adapter is not properly installed In this case re install the driver for the network adapter of the computer Ensure that you have entered the correct user name and user password that are required by the PPP dial up software The user name and the user password are pr
26. se Properties from the shortcut menu 4 In the Wireless Zero Configuration Properties Local Computer dialog box check whether Service status is Started If not click Start 1 gt Click OK to close the dialog box and then close the Computer Management window Step 3 Configure the wireless network connection on your computer l 7A E gt Choose Start gt All Programs gt Accessories gt Communications gt Network Connections In the Network Connections window right click Wireless Network Connection to display a shortcut menu and then select View Available Wireless Networks from the shortcut menu In the Wireless Network Connection Properties dialog box select Wireless Networks Select Use Windows to configure my wireless network settings Click View Wireless Networks In the Wireless Network Connection dialog box select the WLAN with the same name that is configured in Step 1 and then click Connect in the lower right corner of the window In the displayed dialog box enter the access password that is preset in Step 1 and then click Connect After the password is authenticated Connected is displayed in the upper right corner of the WLAN icon in the WLAN list indicating that a wireless connection is set up between you PC and the HG622 8 9 Close the Wireless Network Connection dialog box In the Wireless Network Connection Properties dialog box click OK 5 Basic Configuration 5 1 Chan
27. ur terminal the effects of the WLAN are affected Place your terminal and computer in another direction Do not use your terminal to access the WLAN during thunderstorms After a broadband terminal is installed does Internet access degrade call quality or do telephone calls lower the Internet access rate No The terminal uses the frequency division multiplexing FDM and splitter technologies to separate voice signals from data signals Although the two types of signals are transmitted through one telephone line they are carried by different frequency bands Therefore they do not interfere with each other In this case you can make a telephone call and access the Internet simultaneously without degrading call quality or lowering the Internet access rate 18 7 Appendix 7 1 Indicators U U U U U U U MeHuawer W E CD p ty 1 2 3 4 amp POWER DSL INTERNET WLAN WPS LANI LAN2 LAN3 LAN4 USB 123 45 67 8 9 10 No Status Description l POWER On The HG622 is powered on Off The HG622 is powered off 2 DSL The HG622 is activated Blinking Blinking The HG622 is being activated Off The HG622 is powered off 19 No Indicator Status 3 INTERNET Blinking Off 4 WLAN Blinking in 5 Off 5 WPS O 5 Blinking ah Off On Blinking 6 9 LANI LAN4 Off 10 USB On Blinking Off Description e The HG622 works in
Download Pdf Manuals
Related Search