Home

HP LaserJet 4250 User's Manual

1. 5 P the driver is displayed in the Client Printer Driver field click 6 finish To use the CSR compatible driver for 2K and XP clients only click on Use client side rendering with this driver Note NT clients will not be able to use this print share if a CSR driver is attached to this share If the printer driver for the print share is not displayed in the drop down list on this page click new driver A security warning is displayed Click Yes to continue and then follow the steps to add the printer driver and associate it with the print share just added Note After the PSA has been configured and drivers have been associated with print shares the configuration should be backed up Note Having Windows 2000 XP versions and NT versions of drivers with the same names installed on a PSA can result in the loss of printer settings and functionality e g inability to print in landscape mode or loss of watermarks To eliminate this risk of lost printer functionality HP recommends two workarounds Install and distribute only NT printer drivers on the PSA for all of the NT 2K and XP clients or If print shares for both driver versions are required create a separate share for each driver type on separate PSAs This only affects NT and 2K XP printer drivers and not 9X drivers 9X drivers can still be installed along with NT or 2000 XP drivers Nr For more information please refer to the white papers on client migratio
2. hp print server appliance View Certificate Gommon Marna HP Prin appbanta 0000S Sor Oa ganizon Hewiet Packard ii Cuganatonal Ure O01 eee Poe Validity Period 365 Cipher value Low DES 5h i Add on 1 biter IDE S 155 bi anan Requesting a New Certificate The New Certificate page is displayed after is clicked on the SSL Certificate page There are two options for a new certificate e Create a self signed Certificate e Request a signed certificate from a Certificate Authority hp print server appliance New Certificate To enable secure web genices pour device must have an S08 Cartiicale inatalled You may inetall a cenificate that has baen issued by a trusted Cartiicate Issue or you may crate a cevtificate that is Selksiqned A selkhsigned Certticae prades encryplion of data beteeen the chen and dence however it doce real provide trusted authentecation of the device See Help for addiional information amp Create a selfaigned Cerificate Request a signed cenificate from a Centificate Authority gt ret Lx cancel hip Creating a Self Signed Certificate To create a new self signed certificate select the radio button for this option on the New Certificate page and click The Self Signed Certificate page is displayed Self Signed Certificate Page Field Names Description Fully qualified domain name or IP Address of the PSA Used to identify the device HPX595 rose hp com Organizati
3. A backup restore or upgrade is already in progress Please wait until it is complete before attempting another process Verify the file is a valid PSA file and then retry the upgrade process Informational message Explanation Remedy On the Filters page in the Event Log at least one category must be selected Please select at least one level to view e Security SEC e Networking NET e Administrative ADM On the Filters page in the Event Log at least one level must be selected e Critical CRIT e Error ERR e Informational INFO Troubleshooting the HP Print Server Appliance Links within this page Hardware Problems Configuration Problems Printing Problems Printer Driver Problems Security Problems About the Indicator Lights LEDs 4 4 Links to related pages System Messages Event Log and Messages Frequently Asked Questions Diagnostics Note Always check the Event Log for messages when troubleshooting a problem with the PSA Hardware Problems Condition Possible Cause Solution Bad power cable or AC outlet Replace cable and or verify that the outlet is working properly If the outlet and cable are good contact HP support to replace the unit The PSA does not power up select DHCP and initialization continues However DHCP No Reply Press y to e The RJ 45 network cables are not connected Securely connect the network cables
4. Note An XP 2K or NT driver must be added before a 9x driver can be added Supported operating system Specify the operating system for the driver being added Note The driver s operating system specified must never be newer than the operating system of the PC you are working from For example if you are working from an NT system you can only add NT and 9x drivers If you are working from an XP system you can add XP 2K NT and 9x drivers hp print server appliance New Printer Driver Step 1 of 3 Spacey fhe locaton of ihe drier setup infornaion file ind file and indicate whith operating selam tha drear Suppo Cuter setup information file er Supported operating spate Eeit anos MENE Carel Help e New Printer Driver page Step 2 of 3 New Printer Driver Step 2 of 3 Field Name Description Highlight the driver to install and click gt next Note An XP 2K or NT driver must be added before a 9x driver can be added Drivers hp print server appliance New Printer Driver Step 2 of 3 Select the primier driver you wank Wo inetall HF DesignJet 1055CM PSs e New Printer Driver page Step 3 of 3 New Printer Driver Step 3 of 3 Field Name Description Install a driver Select additional printer drivers to install Additional printer drivers can be installed for the client OS or any previous version of the OS For example if the client OS i
5. You have good text for this in your other document Explanation Remedy That name is reserved for internal use Retype the name Informational message Each printer must have a unique name Retype the name and make sure it s different from any other printer name on this PSA A print server appliance test page has been queued to the queue printer queue Attempts to print to the printer failed Cannot be contacted Changes have been made to the print queue Please apply these changes before printing a test page Connected Disabled Door open Driver name not found Error Printer unknown Insufficient disk space to write file name Invalid Queue Name Max length is len s disallowed characters are disallowed s Invalid Printer Address The printer address must be an IP address or a hostname IP address must be in the format xxx xxx XXX XXX Hostnames must be alphanumeric with no spaces Dashes and periods are acceptable Invalid Print Share Description Printer descriptions can contain alphanumeric characters spaces dashes underscores _ plus signs commas and periods Invalid print share name Print Share names may only contain alphanumeric characters underscores _ dashes periods and question marks Low paper Low toner LPD Not Supported No paper Confirmation message after print test page was pressed A configuration test page was
6. EN 61000 4 2 1995 EN 61000 4 3 1996 EN 61000 4 5 1995 EN 61000 4 4 1995 IEC 61000 4 6 1996 EN 61000 4 6 1996 IEC 61000 4 8 1993 EN 61000 4 8 1993 IEC 61000 4 11 1994 EN 61000 4 11 1994 EN61000 3 2 1995 EN61000 3 3 1995 FCC Title 47 CFR Part 15 Class A Supplementary Information The product herewith complies with the requirements of the Low Voltage Directive 73 23 EEC and the EMC Directive 89 336 EEC and carries the CE marking accordingly Shielded cables are recommended to meet the above specifications Tested with Hewlett Packard Co products only Roseville March 4 2003 Signature of HP Representative Jill Stevenson Regulatory Manager European Contact Your local Hewlett Packard Sales and Service Office or Hewlett Packard GmbH Department TRE Herrenberger Strasse 130 D 71034 B blingen FAX 49 7031 14 3143 Trademarks and Copyrights Copyright C Hewlett Packard Co 1999 2003 This information is subject to change without notice and is provided as is with no warranty Hewlett Packard shall not be liable for any direct indirect special incidental or consequential damages in connection with the use of this material Microsoft MS DOS Windows Windows NT are U S registered trademarks of Microsoft Corporation Netscape and Netscape Navigator are U S registered trademarks of Netscape Communications Corporation APC and other names of APC pro
7. HP Color Laser et 4500 series printers HP Color Laser et 8500 series printers HP Color Laser et 4550 series printers HP Color Laser et 8550 series printers HP Color Laser et 4600 series printers HP Laser et Printers HP Laser et 4 series printers HP Laser et 4050 series printers HP Laser et 4 4M Plus printer HP Laser et 4100 series printers HP Laser et 4Si printer HP Laser et 4200 series printers HP Laser et 4V printer HP Laser et 4300 series printers HP Laser et 5 5M series printers HP Laser et 5000 series printers HP Laser et 5Si series printers HP Laser et 5100 series printers HP Laser et 6P 6MP series printers HP Laser et 8000 series printers HP Laser et 2100 series printers HP Laser et 8100 series printers HP Laser et 3300 series printers HP Laser et 8150 series printers HP Laser et 4000 series printers HP Laser et 9000 series printers To add a print share see the next section Note If Domain Authentication is enabled on the Microsoft Network Settings page the administrator must either have a local account on the PSA with the same user name and password as their domain account or a domain account for the administrator must be added to the PSA If Domain Authentication is not enabled the administrator logged onto the PC must have a local administrator account with the same name and password as their domain account Adding a Printer to
8. 4 4 Administrator Accounts for the Appliance Links to related pages Troubleshooting the Appliance Related System Messages Microsoft Network Settings Page The Microsoft Network Settings page is accessible from the menu under Networking in the web interface On this page administrators can change the name of the PSA identify the primary and secondary WINS server addresses identify the Windows domain or workgroup enable Microsoft Domain authentication Microsoft Network Settings Page Field Name Description Print Server Appliance Name Primary WINS Server Address Secondary WINS Server Address Windows Domain or Workgroup Enable Domain Authentication Automatically Discover Domain Controllers Manually Specify Domain Controllers Domain Controller Type a name for the PSA The PSA name will be displayed e Inthe Network Neighborhood and in My Network Places on each client workstation Both are visible from Microsoft Windows Explorer e On the Overview page in the web interface for the PSA e On the front panel of the PSA If the network uses DNS to identify network resources this name should match the DNS name The PSA name can contain up to 15 alphanumeric characters It may also contain hyphens and underscores _ This name cannot begin with a hyphen but it can have a hyphen within the name The hyphen cannot be the first character because the PSA name
9. Installing Printer Drivers Plaase wait while your HP Laserlet9900 Series PCL 5 prntar crivers are irstaSed of Windows XP driver euccesefully installed XM Windows 2000 driver instsHation failed ov Windows HT 4 0 diver keeping existing drier w Windows 9x Windows 95 99 Me diver successfully instabed Ww Drtwer Initialization successfully initial zed OK Cencel Help After the final status is displayed click OK Driver Name Mismatch When installing drivers for multiple operating systems it is possible that the driver names do not match Several scenarios and suggestions are possible ia Resolution Windows 2000 and XP drivers will dd the same printer to the PSA twice once with the Windows NT driver not have the same name as a hen add the printer again with a different name with a Windows 2000 or Windows NT driver P driver Windows 2000 and XP or NT he PSA displays the Driver Name Mismatch dialog you will then be able to drivers does not have the same install the Windows 9x driver using the Windows 2000 XP or the NT as the name as a Windows 9x driver display name This will allow the 9x drivers to become point and print capable Note Having Windows 2000 XP versions and NT versions of drivers with the same names installed on a PSA can result in the loss of printer settings and functionality e g inability to print in landscape mode or loss of watermarks To eliminate this risk of lost printer functionalit
10. Links within this page TCP IP and DNS Settings gt Configuring the PSA Using the Web Interface Links to related pages Related System Messages Troubleshooting the PSA TCP IP and DNS Settings The TCP IP and DNS Settings page is accessible under Networking on the menu in the web interface On this page administrators can configure the IP address subnet mask gateway Primary Domain Name Server DNS address Secondary Domain Name Server DNS address DNS Domain Name hp print server appliance TCPIP and DNS Settings Obtain an iP Address automatically wing DHCP IP Address 152947124 Subnet Mask esg 2552550 Default Gateway 1529402 Primary Domain Name Server DNS Address 15 251 192 61 Secondary Domain Name Serer DNS Address 15 251 16061 DHS Domain Name t g madonan tari iimedormenn can Gheck for paini Serer apollante frman updates from hp tom during each web login Find oul mane about HP s privacy policy and this feature Manually specii IF information screen to change Field Name Description Obtain an IP address automatically using DHCP Select this option for the PSA to be automatically configured using Dynamic Host Configuration Protocol DHCP Ensure that a valid DHCP server and address leases are available If DHCP was chosen the IP address subnet mask and default gateway will be automatically configured Manually specify IP information Select this o
11. N up Back to Front Zoomsmart and rotate 180 degrees do not show up on the printer pages In order to install drivers onto the PSA a user must be logged onto their PC with a user account that has permission to install software on that PC and have a corresponding administrator account on the PSA If NT domain authentication is enabled on the Microsoft Network Settings page administrator accounts on the PSA can be set up on the Administrators Add Domain Accounts page in the PSA s web interface under Security If NT domain authentication is not enabled the user must set up a local administrator account on the PSA with a name and password that matches their NT user account Drivers for Microsoft Windows NT 4 0 usually work with both Windows 2000 and Windows XP Consequently many vendors will label a driver as Windows 2000 or XP when the driver conforms to the NT 4 0 driver specification As a result Windows 2000 drivers can show up as Windows NT drivers Drivers for Microsoft Windows NT 4 0 usually work with both Windows 2000 and Windows XP Consequently many vendors will label a driver as Windows 2000 or XP when the driver conforms to the NT 4 0 driver specification Since there is no unique XP driver specification drivers labeled by a printer vendor for XP will always appear as either NT 4 0 or Windows 2000 drivers Problems with Windows 2K and XP drivers can include N up printing multiple pages in a reduced for
12. Remedy Retype the hostname using only alphanumeric characters with no spaces Dashes and periods are acceptable Confirmation message Explanation Remedy The trap destination is already in the table Retype the community name using only the valid characters The community name must be between 2 and 32 characters The SNMPv3 account has already been created To delete it uncheck Enable SNMPv3 and then click apply ppty Retype the Authentication Key using only numbers 0 9 or characters a f or A F Retype the Privacy Key using only numbers 0 9 or characters a f or A F IP addresses are written as four numbers separated by periods where the first number is between 1 and 255 and the other three numbers are between 0 and 255 Retype the IP address in the format XXX XXX XXX XXX The authentication key must be 32 characters long The privacy key must be 32 characters long The user name can be between 2 and 32 characters long Invalid Port Number port number System call error Administrators Page Message Name s cannot be contacted A name is required for the user account Backup Cannot contact the Domain Controller Connected Domain account name is too long Maximum length is length Domain controller unavailable Domain controller unavailable Cached data will be returned Incorrect Domain Name or Password Invalid Administrator Name The Administrator Name must be alpha
13. www modssl org 4 The names mod_ ssl must not be used to endorse or promote products derived from this software without prior written permission For written permission please contact rse engelschall com 5 Products derived from this software may not be called mod_ssl nor may mod_ssl appear in their names without prior written permission of Ralf S Engelschall 6 Redistributions of any form whatsoever must retain the following acknowledgment This product includes software developed by Ralf S Engelschall lt rse engelschall com gt for use in the mod_ssl project http www modssl org THIS SOFTWARE IS PROVIDED BY RALF S ENGELSCHALL AS IS AND ANY EXPRESSED OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL RALF S ENGELSCHALL OR HIS CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE The OpenLDAP Public License Version 2 5 11 May 2001 Redistribution and use of this software and associated doc
14. INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
15. e Check for an updated version of the driver Go to http www hp com e Select a different inf file that matches the operating system selected e Select an inf file with a path less than 128 characters in length e Configure the PSA and PC with appropriate access credentials as described in Description above Printer driver initialization failed Driver has been disabled for automatic driver download point and print 503 Level Error Category Administrative Description The driver could not be initialized and has been disabled by the PSA Disabled drivers are not suitable for point and print Action Add drivers from http www hp com if you need HP drivers You will be sure to get the latest version of the driver Installed printer driver installed driver was for a different OS version than specified 504 Level Informational Category Administrative Description Drivers for older operating systems for example NT can successfully work with newer operating systems for example XP Consequently new drivers are not always developed for newer operating systems if an older driver works with the operating system This message indicates that a newer driver was actually installed and not an older driver System Messages Links within this page Add Printer and Add Driver Wizards Under Print Services ay Print Shares Page Driver Management Page Under Networking Date Time Page TCP IP and DN
16. this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 Neither the name of J ulianne F Haugh nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY JULIE HAUGH AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL JULIE HAUGH OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Copyright c 1991 1992 Paul Kranenburg lt pk cs few eur nl gt Copyright c 1993 Branko Lankester lt branko hacktic nl gt Copyright c 1993 Ulrich Pegelow lt pegelow moorea uni muenster de gt Copyright c 1995 1996 Michael Elizabeth Chastain lt mec duracef shout net
17. under Maintenance in the web interface Display Action v To begin configuring the link speed and duplex mode for the PSA press once HPMC60CAF 09 12AM IP Config Press to begin Link Config Press v to begin Link Hode fAuto Detect Press to skip the IP configuration and to go to the Link Speed and Duplex Mode configuration oe ys Select the link mode by pressing 1 or to toggle between Manual and Auto Detect Press to being configuring the link speed Mbps If Auto Detect mode The detected setting is displayed 10 Mbps or 100Mbps Speed Pa 10 Mbps 1 Press to begin configuring the duplex mode Duplex If Auto Detect mode The detected duplex mode is displayed Half or Full Hal f OoN I uv n Press to continue Exit config Press to exit v Apply changes X Cancel changes Then press ai to apply changes or press x to cancel the changes Setting or Changing the Front Panel Password There are two types of passwords that can be set for the PSA a front panel password one per PSA and an administrator password can be multiple accounts but there must be at least one which enables access to the web interface to manage the PSA The front panel password is discussed in this section There is no front panel password until it is set This password limits access to front panel func
18. Central device status reporting Scheduled batch firmware upgrades Scheduled backup restore of configuration settings Product Description The PSA contains a large disk drive for spooling print jobs from clients Print jobs are stored on the disk drive The number of print jobs is only limited by the disk space available on the PSA The PSA provides web accessible printer management and configuration and spools print jobs from the following clients e Microsoft Windows 95 e Microsoft Windows 98 e Microsoft Windows 2000 Microsoft Windows NT Microsoft Windows ME Microsoft Windows XP UNIX Following are some main features of the PSA e Off loads spooling from a UNIX or Windows NT server e Easy installation e Easy management o Centralized management using Web J etadmin o Can be managed from any supported web browser on the network o Virtually no management required once installed Supports APC uninterruptible power supplies UPSs simple or basic signaling protocol Increases performance of general purpose servers Remote management using Web J etadmin Supports SNMP v1 v2c and v3 Provides data privacy data integrity and server authentication using Secure Sockets Layer SSL v2 v3 and Transport Layer Security TLS v1 Easy replication of configuration and printer drivers across PSAs e Reduces network traffic e Seamless integration into Microsoft networking environment security authentication authorization and active directory e
19. Hewlett Packard Limited Warranty Statement HP Product Duration of Limited Warranty HP Print Server Appliance 4250 J 7941A 2 year JP HP warrants to you the end user customer that HP hardware accessories and supplies will be free from defects in materials and workmanship after the date of purchase for the period of one 1 year If HP receives notice of such defects during the warranty period HP will at its option either repair or replace products that prove to be defective Replacement products may be either new or equivalent in performance to new HP warrants to you that HP software will not fail to execute its programming instructions after the date of purchase for a period of NI NETY 90 DAYS due to defects in material and workmanship when properly installed and used If HP receives notice of such defects during the NINETY 90 day period HP will replace software that does not execute its programming instructions due to such defects You are responsible for restoring any configuration or data In no event will HP or its affiliates subcontractors or suppliers be liable for any of the following damages for loss of data or software restoration damages relating to Customer s procurement of substitute products or services i e cost of cover or incidental special or consequential damages including downtime costs or lost profits The remedies herein are the customer s sole and exclusive remedies HP does not warrant t
20. IP address of where the trap is being sent Type a community name for the trap packet Public is a common community name SNMP Traps Port Specify the port number Most SNMP agents receive traps on port 162 hp print server appliance SNMP Traps Community Name SNMP Settings F Beatie GeuPvang Enable SNMP vii ead and Wirte access Erab e GHMF YIR ekini atera F Eaybe hupe Lige Harni Mhentir sion Kir Ager Mbp Freer Kg igari DES EsgineiD Mo enb baha SHP Tani IP Adineig Comin Harma Pan i EE pubic fiez TERRE public fige To register for traps follow these steps 1 At a workstation access the web browser and type the IP address for the PSA 2 Log on to the PSA as an administrator The default user name is admin and the default password is admin 3 Under Networking on the menu select SNMP See the description of the fields above for more information 4 In IP Address type the IP address for where the trap is to be sent 5 In Community Name type a community name for the trap packet Public is a commonly used community name 6 In Port specify the port number Most SNMP agents receive traps on port 162 7 Click apply to complete the registration process The SNMP agent is shut down and restarted This causes a trap to be sent out 1 coldStart 1 3 6 1 6 3 1 1 5 1 Trap Testing The OID snmpTrapTest 1 3 6 1 4 1 11 2 46 2 1 10 4 will caus
21. If the cable is securely connected the network LED should blink when their is traffic on that network segment e A DHCP server could not be found on the network Verify DHCP server configuration continue appears on the LCD display SS The Power On LED is lit The RJ 45 network cables are not connected Securely connect the but the Network LED does network cables not light The cable may be faulty See if another device can communicate on the network using the same cable Verify the hub or switch is connected and working properly The Alert LED is lit The PSA is not fully booted Wait for the bootup process to complete A critical defect has been detected Power cycle the unit to see if this corrects the problem If the Alert LED stays lit contact HP support can t locate the PSA on Make sure the PSA is configured with an IP address a subnet mask the network and a default gateway Make sure the Network LED is lit The RJ 45 network cables are not connected Securely connect the network cables A network hub has lost AC power Re establish AC power to the hub The PSA is not powered up Power up the PSA on and let it boot up For alternative causes solutions see Client Setup Problems below We had a power outage At the time the outage occurred What do need to do to recover e Jobs that were spooled but not yet printing may need to be sent again from the client PC after the PSA has been normally powered
22. Microsoft Windows Domain Authentication Features A domain is a logical grouping of network servers and other computers that share a common security and user account for each user Users log on to the domain not to individual servers in the domain Microsoft domain security is a feature that allows administrators to easily authorize or restrict print administration and services to specific groups or users by using their existing user name and password of the domain The domain security feature provides the following features Seamless integration for the print client user the native tools for printing and managing personal documents work the same as they do with Microsoft spoolers Assignment of permissions are on a per printer basis Disabling and enabling domain security and authority without losing configuration information Setting or changing permissions using the web interface or native tools Specifying selected groups that can have one of the following four permission levels for each printer using native tools o Print print pause and delete your own print jobs o Manage Documents pause and delete other user s print jobs o Full Control print pause and delete other user s print jobs delete printers and change security settings o No Access o Special Access for some Windows 2000 and XP print permissions that do not map directly to the above four permission levels Adding the PSA to a Domain There are two ways to add the PSA
23. NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE OpenLDAP is a trademark of the OpenLDAP Foundation Copyright 1999 2001 The OpenLDAP Foundation Redwood City California USA All Rights Reserved Permission to copy and distributed verbatim copies of this document is granted Copyright 1999 2001 J ohn Coffman All rights reserved License Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution Neither the names of the author s nor the names of other contributors may be used to endorse or promote products derived from this software without specific prior written permission Disclaimer THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE I
24. Network Settings page in the web interface under Networking Enabled LPD printing for all hosts 416 Level Informational Category Administrative Description LPD printing has been enabled for all hosts on the LPD Settings page in the web interface under Networking Enabled LPD printing for specified hosts 417 Level Informational Category Administrative Description LPD printing has been enabled for selected hosts on the LPD Settings page in the web interface under Networking Disabled LPD printing for all hosts 418 Level Informational Category Administrative Description LPD printing has been disabled on the LPD Settings page in the web interface under Networking Set NT user capabilities 419 Level Informational Category Administrative Description A user s access level for a particular printer has been changed through Administrators in the web interface under Security Failed to create NT domain machine account 420 Level Informational Category Administrative Description Using the Microsoft Network Settings page in the web interface under Networking creation of a machine account failed This means that Microsoft networking will not work until a machine account has been created This could be due to any of the following reasons e The user name and password combination was not valid e The user specified does not have authority to create a machine account e The WINS server was not properly
25. Once this change is made in a given copy it is irreversible for that copy so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy This option is useful when you wish to copy part of the code of the Library into a program that is not a library 4 You may copy and distribute the Library or a portion or derivative of it under Section 2 in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine readable source code which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange If distribution of object code is made by offering access to copy from a designated place then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code even though third parties are not compelled to copy the source along with the object code 5 A program that contains no derivative of any portion of the Library but is designed to work with the Library by being compiled or linked with it is called a work that uses the Library Such a work in isolation is not a derivative work of the Library and therefore falls outside the scope of this License However linking a work that uses the Library with the Library creates an executable that is a derivative of the Library because it contains portio
26. POSSIBILITY OF SUCH DAMAGE SAEK EE EE AE IE EA EG A A KK A A 2 EAR AG IE SS IG KK AK Ee AE AR AS Kk ES A A A AE K KK kK k R ASG AS AE IE 2 a oe Copyright 1995 by Wietse Venema All rights reserved Some individual files may be covered by other copyrights This material was originally written and compiled by Wietse Venema at Eindhoven University of Technology The Netherlands in 1990 1991 1992 1993 1994 and 1995 Redistribution and use in source and binary forms are permitted provided that this entire copyright notice is duplicated in all such copies This software is provided as is and without any expressed or implied warranties including without limitation the implied warranties of merchantibility and fitness for any particular purpose RAR A A A A A A A A A K AE EK RKK KREK K EKK K KE K KREK KE K KKR EK EK KE KRR KKK A E OK This is version 2001 Jan 27 of the Info ZIP copyright and license The definitive version of this document should be available at ftp ftp info zip org pub infozip license html indefinitely Copyright c 1990 2001 Info ZIP All rights reserved For the purposes of this copyright and license Info ZIP is defined as the following set of individuals Mark Adler John Bush Karl Davis Harald Denker Jean Michel Dubois J ean loup Gailly Hunter Goatley Ian Gorman Chris Herborth Dirk Haase Greg Hartwig Robert Heath Jonathan Hudson Paul Kienitz David Kirschbaum
27. PSA name nslookup printappliancename domain DNS server IP address For example nslookup mypsa usa 192 168 100 90 If the name lookup does not reply with the PSA s IP address that means there is no entry for the PSA in the DNS server s Forward Lookup table The Forward Lookup table is the table the DNS server uses to determine the IP address based on the DNS name o The following command verifies an entry for the PSA s IP address nslookup printappliance IP Address DNS server IP address For example nslookup 192 168 100 80 192 168 100 90 If the IP address lookup does not reply with the PSA name it means there is no entry for the PSA in the DNS server s Reverse Lookup table The Reverse Lookup table is the table the PSA uses to find a system s name based on its IP address e Check the PSA s Microsoft Network Settings page under Networking in the PSA s web interface If the Specified NT Domain Controllers settings show the host name of the domain server use the IP address of the server instead If Manually specify NT Domain Controllers is selected try selecting Automatically discover NT Domain Controllers instead e Asa test try the following Check the PSA s Microsoft Network Settings page by opening the PSA s web interface If the PSA is configured to Enable NT Domain Authentication so that it is joining the domain re configure it so that it does not join a domain then see if printing is faster If it is consistently faster
28. Places as an available print share configured on the PSA The print share name can be up to 79 characters long including alphanumeric characters and the following special characters Print share names longer than 12 characters might cause problems with Windows 9x and ME or MS DOS clients Various LPD implementations might also have length restrictions Status of the print share Active Cannot be contacted The printer cannot be found It does not respond to a network query or ping Connected Disabled Door open Error Error Printer Unknown Low paper Low toner LPD not supported No paper No toner Offline Online Paper jam Paused Service required Unknown state Jobs Number of print jobs waiting to be printed on the corresponding print share Properties Displays the Properties page Use this page to display and or modify the properties of a selected print share including the print share s name IP address or description pause and resume printing from the print share print a test page Driver Displays the Driver page on which the driver for the print share can be viewed or changed Security Displays the Security page Delete To delete a print share from the PSA follow these steps Print Share 1 Find the print share to delete from the PSA and click on that same line 2 The message Are you sure you want to delete the print share and all of its print jobs is display
29. THE POSSIBILITY OF SUCH DAMAGE This software is based on the original concept as published in the book Internet Programming with Python by Aaron Watters Guido van Rossum and James C Ahlstrom 1996 M amp T Books ISBN 1 55851 484 8 The book and original software is Copyright 1996 by M amp T Books This software consists of an extension to the Apache http server More information about Apache may be found at http www apache org More information on Python language can be found at http www python org The mod_ssl package falls under the Open Source Software label because it s distributed under a BSD style license The detailed license information follows Copyright c 1998 2001 Ralf S Engelschall All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 All advertising materials mentioning features or use of this software must display the following acknowledgment This product includes software developed by Ralf S Engelschall lt rse engelschall com gt for use in the mod_ssl project http
30. The second line of the display shows date time IP address and firmware version in a repeating sequence Starting Front Panel Operation Configure the IP Address for the PSA Configure the Link Speed and Duplex Mode for the PSA Set or Change the Front Panel Password There are three front panel operations IP configuration link speed and duplex mode configuration and password configuration Use the web interface to further configure the PSA Refer back to the Getting Started procedures or refer directly to information about using the web interface to further configure the device Configuring the IP Address Using the Front Panel These procedures explain how to configure an Internet Protocol IP address on the PSA using the front panel The TCP IP and DNS page in the web interface can also be used to do the same Configuring the IP address allows the PSA to route print tasks properly If the network does not use Dynamic Host Configuration Protocol DHCP use the front panel of the PSA to manually enter the IP address subnet mask and default gateway Configuring the IP Address Display Action HPMC60CAF 09 12AM IP Config Press v to begin IP Config Mode DHCP To begin configuring the IP address press ai once Press ai again Select the mode by pressing or to toggle between Manual and DHCP a uv n Press to continue If Manual Use the number buttons on the front
31. Transparent to client users e Easy to pre configure before shipping to a remote office e Web configuration interface e Password security on the front panel and for the web interface e Upgradable e Front panel LCD display and keypad e 10 100Base TX Ethernet network interface e Microsoft networking SMB over IP e Support for native Microsoft client printing tools e Compatible with Microsoft s Point and Print technology automatic driver download from the PSA to clients e Windows NT Domain integration e Line Printer Daemon LPD support for UNIX clients Compatibility with HP Print Servers The PSA will work with any HP print server with firmware version x 03 and above Compatibility with Other Non HP Print Servers Any print server that supports LPD should work with the PSA The proper LPD remote queue name for the print server might have to be known Many print servers will work without specifying a remote queue name use the default HP PRINT SERVER setting however some require a special string in order to work The LPD remote queue name can be obtained from the print server vendor Product Updates When new firmware or other device specific support information is available for the PSA the PSA can be notified automatically On the TCP IP and DNS page a field Check for print server PSA firmware updates during each web login can be checked to enable this feature If this is checked and new firmware or support inf
32. a fee 2 You may modify your copy or copies of the Library or any portion of it thus forming a work based on the Library and copy and distribute such modifications or work under the terms of Section 1 above provided that you also meet all of these conditions a The modified work must itself be a software library b You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change c You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License d If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility other than as an argument passed when the facility is invoked then you must make a good faith effort to ensure that in the event an application does not supply such function or table the facility still operates and performs whatever part of its purpose remains meaningful For example a function in a library to compute square roots has a purpose that is entirely well defined independent of the application Therefore Subsection 2d requires that any application supplied function or table used by this function must be optional if the application does not supply it the square root function must still compute square roots These requirements apply to the modified work as a whole If identifiable sections of that work are not derived fro
33. am having problems printing advance features like Watermark N up Rotate 180 back to front Booklet or other advanced printing features Printer Driver Problems Num Condition Possible Cause Solution can t install the Windows 9x driver for a printer for which already have a Windows NT 2K or XP driver installed am using Internet Explorer 6 and am trying to install and initialize a driver keep getting a message about Java having to be turned on How do do this It is strongly recommend that the PSA s firmware be upgraded to latest 2 4 x or newer to alleviate problems with printer drivers Click here to download the latest firmware for the PSA Remove the printer driver from the PSA and from any computer printing to that printer Download the latest printer driver form the HP Web site and install it on the PSA These Xerox printers use their own print server cards that require the remote name to be Ip in lower case only In Printer Properties Other print server must be selected The Remote Queue Name must be Ip lower case Newer Windows 2K and XP drivers now use a new print driver architecture This new architecture is not compatible with the PSA firmware 2 3 252 or older Upgrade the PSA firmware to 2 5 XX and reload the 2K XP printer driver Select the option Use client side rendering Newer Windows 2K and XP drivers now use a new print driver architecture This new architecture is no
34. below refers to any such program or work and a work based on the Program means either the Program or any derivative work under copyright law that is to say a work containing the Program or a portion of it either verbatim or with modifications and or translated into another language Hereinafter translation is included without limitation in the term modification Each licensee is addressed as you Activities other than copying distribution and modification are not covered by this License they are outside its scope The act of running the Program is not restricted and the output from the Program is covered only if its contents constitute a work based on the Program independent of having been made by running the Program Whether that is true depends on what the Program does 1 You may copy and distribute verbatim copies of the Program s source code as you receive it in any medium provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty keep intact all the notices that refer to this License and to the absence of any warranty and give any other recipients of the Program a copy of this License along with the Program You may charge a fee for the physical act of transferring a copy and you may at your option offer warranty protection in exchange for a fee 2 You may modify your copy or copies of the Program or any portion of it thus forming a work based on the Pr
35. configured Action One or more of the following actions may apply e Re type the user name and password and try again e Check the security levels for that user on the Primary Domain Controller PDC e Verify that you have a WINS server configured and that the WINS server has an entry for the Primary Domain Controller e Use the MS Server Manager to create the account and avoid using the Microsoft Network Settings page Failed to join NT domain 421 Level Informational Category Administrative Description NT Domain Authentication will not work Action Verify that the WINS server configuration on the PSA is correct as entered on the Microsoft Network Settings page Attempt to recreate the machine account on the NT Domain Instead of specifying automatic discovery of the domain controller enter the IP address of the domain controller Changed PSA name 422 Level Informational Category Administrative Description The name of the print server PSA was changed successfully on the Microsoft Network Settings page in the web interface under Networking Changed time 423 Level Informational Category Administrative Description The time was changed successfully on the Date and Time page in the web interface under Networking Removed administrator access from domain accounts 424 Level Informational Category Administrative Description An administrator account was successfully deleted from the specified domain o
36. drivers onto the PSA a user must be logged onto their PC with a user account that has permission to install software on that PC and have a corresponding administrator account on the PSA If NT domain authentication is enabled on the Microsoft Networking Settings page administrator accounts on the PSA can be set up on the Domain Account page in the PSA s web interface under Admin Accounts If NT domain authentication is not enabled the user must set up a local administrator account on the PSA with a name and password that matches their NT user account added a Windows 2000 driver to the PSA but it did not show up in the driver list Drivers for Microsoft Windows NT 4 0 usually work with both Windows 2000 and Windows XP Consequently many vendors will label a driver as Windows 2000 or XP when the driver conforms to the NT 4 0 driver specification As a result Windows 2000 drivers can show up as Windows NT drivers added a Windows XP driver to the PSA but it did not show up in the driver list Drivers for Microsoft Windows NT 4 0 usually work with both Windows 2000 and Windows XP Consequently many vendors will label a driver as Windows 2000 or XP when the driver conforms to the NT 4 0 driver specification Since there is no unique XP driver specification drivers labeled by a printer vendor for XP will always appear as either NT 4 0 or Windows 2000 drivers 7 am having problems with Windows 2000 drivers Problems with Wind
37. enable The driver can now be downloaded to a client s PC for point and print e If the driver had been disabled by the system due to a failure during driver initialization the administrator cannot enable this driver until it is successfully initialized A failure might be attributed to file corruption To initialize the driver first try installing the printer again When asked for a printer driver consider using a different source for the printer driver in case the original file was corrupted If a driver is disabled by the system it must be installed again for it to be enabled use the Add Driver wizard to install the driver again Client side rendering If the driver persistently fails to initialize then the printer created can still be used but when clients connect to that printer they will be prompted to install the driver files for that driver locally The end user will be required to provide driver files for a driver whose name matches the name of the driver associated with the printer on the PSA Note Having Windows 2000 XP versions and NT versions of drivers with the same names installed on a PSA can result in the loss of printer settings and functionality e g inability to print in landscape mode or loss of watermarks To eliminate this risk of lost printer functionality HP recommends two workarounds 1 Install and distribute only NT printer drivers on the PSA for all of the NT 2K and XP clients or 2 If prin
38. for a fee you must give the recipients all the rights that you have You must make sure that they too receive or can get the source code And you must show them these terms so they know their rights We protect your rights with two steps 1 copyright the software and 2 offer you this license which gives you legal permission to copy distribute and or modify the software Also for each author s protection and ours we want to make certain that everyone understands that there is no warranty for this free software If the software is modified by someone else and passed on we want its recipients to know that what they have is not the original so that any problems introduced by others will not reflect on the original authors reputations Finally any free program is threatened constantly by software patents We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses in effect making the program proprietary To prevent this we have made it clear that any patent must be licensed for everyone s free use or not licensed at all The precise terms and conditions for copying distribution and modification follow GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING DISTRIBUTION AND MODIFICATION 0 This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License The Program
39. from the Certificate Authority follow these steps to install it 1 At a workstation access the web browser and type the IP address for the PSA 2 Log on to the PSA as an administrator The default user name is admin and the default password is admin 3 Under Security on the menu select SSL Certificate See the description of the fields above for more information 4 Click install certificate The Install Certificate page is displayed hp print server appliance install Certificate Phage irradi Oe cardi ate ind Pie eet eee provided The cabi aie needs bo bain PEM Saeed acceding ce mal bib diji bet Aine The cadi Ha cue Foner bean creme mang Ha ira Cavit Fa ger HaT Dy This Print Saver Apa 5 Cut and paste the text from the signed certificate into the text box displayed 6 Click The web interface will restart and the new certificate will be valid Backing Up Restoring Reseting Rebooting and Upgrading the PSA Links within this page Backing Up Network Settings and Printer Information 4 Restoring Network Settings and Printer Information Using the Web Interface Resetting the PSA to Factory Defaults Using the Front Panel Rebooting or Restarting the PSA Upgrading the Firmware on the PSA Links to related pages Troubleshooting the PSA Related System Messages Backing Up Network Settings and Printer Information Saving the configuration parameters makes it easy to restore t
40. in any derivative version provided however that PSF s License Agreement and PSF s notice of copyright i e Copyright c 2001 Python Software Foundation All Rights Reserved are retained in Python 2 2 alone or in any derivative version prepared by Licensee 3 In the event Licensee prepares a derivative work that is based on or incorporates Python 2 2 or any part thereof and wants to make the derivative work available to others as provided herein then Licensee hereby agrees to include in any such work a brief summary of the changes made to Python 2 2 4 PSF is making Python 2 2 available to Licensee on an AS IS basis PSF MAKES NO REPRESENTATIONS OR WARRANTIES EXPRESS OR IMPLIED BY WAY OF EXAMPLE BUT NOT LIMITATION PSF MAKES NO AND DISCLAIMS ANY REPRESENTATION OR WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE OR THAT THE USE OF PYTHON 2 2 WILL NOT INFRINGE ANY THIRD PARTY RIGHTS 5 PSF SHALL NOT BE LIABLE TO LICENSEE OR ANY OTHER USERS OF PYTHON 2 2 FOR ANY INCIDENTAL SPECIAL OR CONSEQUENTIAL DAMAGES OR LOSS AS A RESULT OF MODIFYING DISTRIBUTING OR OTHERWISE USING PYTHON 2 2 OR ANY DERIVATIVE THEREOF EVEN IF ADVISED OF THE POSSIBILITY THEREOF 6 This License Agreement will automatically terminate upon a material breach of its terms and conditions 7 Nothing in this License Agreement shall be deemed to create any relationship of agency partnership or joint venture between PSF and Licensee This License Agre
41. is automatically run every ten minutes querying resources across the network for example DNS WINS domain controllers and printers To refresh this page click d refres This will initiate the process of querying the network which can take a few minutes depending on the number of nodes contacted and their responsiveness Each section of the Diagnostic Report has a different freshness attribute See the section below for its attribute Diagnostic Parameter Description Status last gathered Date and time that the diagnostic tests were last run These tests are run every ten minutes and also when the administrator clicks the refresh button on the Diagnostic Report page Report displayed Date and time that the Diagnostic Report was last displayed System The values in the section are updated every minute Parameter Description System Load past 15 minutes This metric ranges from 0 to 100 and shows how heavily the PSA has been used in the past 15 minutes If the System Load often displays over 80 the PSA is overloaded and some of the printers should be migrated to another PSA Disk Usage This metric ranges from 0 to 100 and shows the amount of spool disk in use If the Disk Usage value is e above 80 an error log is generated e above 90 a critical log is generated 100 the PSA will not be able to print The most common reason for high disk utilization is that one or more printers is not printing and print jobs are
42. log which is a tab delimited file psalog tab to the directory specified Once saved the file can be dragged and dropped onto a Microsoft Excel spreadsheet placing each event into its own row The events can then be sorted The file can also be opened in a text editor but the results are not as clean Note If Filters are ON is displayed at the top of the log there might be events that are not displayed Before the event log is saved it is recommended to click and check all of the filters Then review the log prior to saving it Deletes all entries from the Event Log A confirmation message is displayed After the log is cleared a new entry is displayed in the log with the date and time the log was cleared and the name of the administrator who cleared it clear Note If Filters are ON is displayed at the top of the log there might be logged events that are not displayed Before the event log is cleared it is recommended to click and check all of the filters Then review the log prior to clearing it Displays online help for the Event Log Fields on the Event Log Page Field Name Description Event Log filtered log On the Event Log Filters page filters Types and Levels have been selected filtered log that have screened out messages that are currently in the Event Log or Event Log full full unfiltered log All of the messages in the Event Log are displayed none have been unfiltered log
43. manual Driver does not match OS file _name is not the correct driver information file for Windows 4 0 To add a driver for Windows NT 4 0 rerun this Add Driver wizard and specify the correct driver setup information file inf For more information about drivers consult the online manual Driver information not found The driver information in file_name does not match the selected printer model driver_name Please specify another driver setup information file inf for OS For more details on driver name mismatches refer to the Online Manual Driver Initialization initialization complete Driver Initialization initialization failed Driver Installation Complete Driver Initialization Required The driver specified for Windows 2000 XP is really a Windows NT 4 0 driver and has been installed as such Although this driver will probably work you may wish to determine if there is a native 2000 XP driver available for this printer To do this locate and install the native Windows 2000 XP driver this will ensure this driver works properly with Windows 2000 and Windows XP If you choose not to find the native driver test the driver thoroughly after it has been installed and initialized The inf file specified for the Windows NT 4 0 driver is not a Windows NT 4 0 driver file You will need to re run the Add Driver Wizard and either specify the correct operating system for this inf file or specify a Windows
44. must be alphanumeric with no spaces Dashes and periods are acceptable Invalid Gateway Address The gateway address must be in the format xxx xxx XXX XXX If the gateway address is unknown use the PSA s IP address Invalid I P Address The IP address must be in the format xxx XXX XXX XXX Invalid Subnet Mask The subnet mask must be in the format xxx xxx XxXx XXX NAC Internal Error Restarting network please wait Your network settings have been updated This field s value is being assigned by DHCP If you remain in DHCP mode your changes to this field will be lost WINS server IP address cannot be contacted Microsoft Network Settings Page Complete both fields and click apply Confirmation message Explanation Remedy Informational The IP address of the gateway is unreachable with the currently assigned PSA IP address and subnet mask Retype the DNS server address in the xxx xxx XXX XXX format Note This must be the DNS server s IP address not its friendly name If the network does not have a DNS server leave this field blank Retype the DNS Domain Name Use only alphanumeric characters with no spaces Dashes and periods are acceptable Gateway addresses are written as four numbers separated by periods where the first number is between 1 and 255 and the other three numbers are between 0 and 255 Retype the gateway address in the format xxx XXX XXX XXxX If the address is u
45. network problems cable malfunction hub or router problems not on the network the IP address or host name specified is not a domain controller power is disconnected or interrupted Action e Retype the DNS servers address in the xxx xxx xxx xxx format on Microsoft Network Settings page and try again Properly configured DNS servers are essential for the proper operation of the PSA If the PSA cannot reach the DNS servers users on other subnets on the other side of a router will not be able to see the PSA in Network Neighborhood e If the DNS servers WINS server or Domain Controller is not on the same subnet as the PSA ensure that the TCP IP configurations as entered on the TCP IP and DNS page in the web interface under Networking are configured correctly and that the network infrastructure such as the default gateway is configured and is operational Authentication failed 217 Level Error Category Security Description The user attempted to access the PSA but the request was denied because the user identity was not confirmed or user was not authorized to use the PSA Action It is necessary for the administrator to take one or more of the following actions e retype the name and password combination e verify that the user account exists e monitor the log file for additional unauthorized access attempts Authorization failed local account 218 Level Error Category Security Description The user attem
46. non HP print server am trying to use with my PSA Will this work am trying to configure the PSA using TELNET Will this work The Network Neighborhood browser has not yet updated Whether you get prompted for a password and what the password prompt looks like are a function of your web browser and its configuration If the PSA is a member of a domain it will always ask your browser to use your existing Windows Domain authentication Microsoft s Internet Explorer uses a concept of security zones to determine whether the web server in this case the PSA is within the Intranet Zone There are a number of ways to include the PSA in the Intranet Zone but the easiest is to open Tools gt Internet Options gt Connections gt LAN Settings gt Advanced and type the full name the IP address and the short name in the Exceptions box This will cause Microsoft s Internet Explorer to connect directly with the PSA and avoid your proxy server By default Internet Explorer considers direct connections in the Intranet Zone Consult your Microsoft Internet Explorer documentation to determine other ways to include the PSA in the Intranet Zone If you are using proxy servers in your environment and you want to use the single sign on functionality your web browser will need to be set up to bypass the proxy server for the PSA s host name if it includes periods and IP address An administrator can view or change their local Int
47. on the Domain Controller A valid administrator s password as stored on the Domain Controller hp print server appliance Microsoft Network Settings Print Appliance Marne Primar MS Sencar Address Secondary WINS Serer Address 00O Windswe Danair or Workgroup ff T Enabie Domain Authentication Automatically Discover Domain Controllers Manually Specify Domain Controllers Domain Conimier Specitied Domain Controllers of add remort Create an account for this device in the domain Domain Administrator Mamie i Domain Adminigstator Password l To complete the Microsoft Network Settings page follow these steps Go SOY OL At a workstation access the web browser and type the IP address for the PSA Log on to the PSA as an administrator The default user name is admin and the default password is admin Under Networking on the menu select Microsoft Network See the description of the fields above for more information Complete the Print Appliance Name field Complete the Primary WINS Server Address field Complete the Secondary WINS Server Address field Complete the Windows Domain or Workgroup field If the security feature for Windows authentication and authority is being used complete the other fields on this page Click 7 apply The network will be restarted with the new settings Note Hewlett Packard recommends backing up the settings after this page is completed
48. operating system Enter Network Password e Please type your user name and password Site 15 29 41 164 User Name Password Domain Tl Save this password in pour password list Cancel After the name password and domain or entered the process is as 1 above 3 If the administrator is not using Internet Explorer the browser will use the Basic Authentication protocol Basic Authentication If an administrator uses a browser other than Internet Explorer SSO will not be supported the browser will communicate with the PSA through Basic security and all security information will be passed to the PSA in cleartext The administrator will be prompted with a Basic security password prompt having two fields and can then either choose to use a local administrator account user name and password or specify a domain user name and password where the user name includes the domain name for example domainname user name In the latter case a user with a domain administrator account on the PSA can access the web interface through a Basic security prompt without having a local administrator account However this user name and password are passed in cleartext The screen shown is for Microsoft Windows NT 4 x this screen might vary depending on your operating system Enter Network Password e Please type your user name and password Site alpos Realm appliance User Name Password Save this password in you
49. or IP address for the printer you wish to add The printer hostname you entered is the same as this print server appliance Please enter the name or IP address for the printer you wish to add The printer you selected was not found You must specify a printer name for this printer You must specify the address of this printer You must specify the remote queue name for this printer The driver you have selected does not support client side rendering NT clients cannot print with drivers using client side rendering If you have NT clients do not connect them to this share or go back and deselect client side rendering Driver Management Page Message Informational message Informational message Informational message Informational message Informational message Confirmation message Confirmation message Informational message Confirmation message Each printer on the network has a unique IP address This may be the printer s IP address or its DNS hostname If a DNS hostname is being used a DNS server address must be specified for the PSA on the TCP IP and DNS Settings page on the menu in the web interface under under Networking Each printer on the network should have a unique hostname Retype the name or IP address and make sure it is unique An attempt was made to print to a printer that does not exist The PSA allows up to 79 characters for the share name However for any name over 12 characters Wind
50. paid for the product that is the subject of the claim and for damages for bodily injury or death to the extent that all such damages are determined by a court of competent jurisdiction to have been directly caused by a defective HP product 10 TO THE EXTENT ALLOWED BY LOCAL LAW THE REMEDIES IN THIS WARRANTY STATEMENT ARE YOUR SOLE AND EXCLUSIVE REMEDIES EXCEPT AS INDICATED ABOVE IN NO EVENT WILL HP OR ITS SUPPLIERS BE LIABLE FOR LOSS OF DATA OR FOR DIRECT SPECIAL INCIDENTAL CONSEQUENTIAL INCLUDING LOST PROFIT OR DATA OR OTHER DAMAGE WHETHER BASED IN CONTRACT TORT OR OTHERWISE Some countries states or provinces do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you THE WARRANTY TERMS CONTAINED IN THIS STATEMENT EXCEPT TO THE EXTENT LAWFULLY PERMITTED DO NOT EXCLUDE RESTRICT OR MODIFY AND ARE IN ADDITION TO THE MANDATORY STATUTORY RIGHTS APPLICABLE TO THE SALE OF THIS PRODUCT TO YOU Local Warranty Statements HP s limited warranty is valid in any country or locality where HP has a support presence for this product and where HP has marketed this product The level of warranty service you receive may vary according to local standards HP will not alter form fit or function of the product to make it operate in a country for which it was never intended to function for legal or regulatory reasons Regulatory Statements FCC Statement USA Gene
51. requested but LPR was not able to print the job on the selected printer The disk space might be full or the printer might be off or offline The printer cannot be found It does not respond to a network query or ping An attempt was made to print a test page before applying the changes made on the print share s Properties page Confirmation message Informational message Informational message That driver was not found Choose another driver or reinstall this driver The status of this printer is unknown Click refresh to update the status Internal Error Try reducing the number of print queues Retype the queue name Printer addresses use the same format as IP addresses or hostnames Retype the printer address using the appropriate format For IP addresses x x x x where the first number is between 1 and 255 and the other three numbers are between 0 and 255 For hostnames use only alphanumeric characters with no spaces Dashes and periods are acceptable The Print Share Description field is optional If desired retype the description Retype the printer name Informational message Informational message The LPD protocol is not supported on this printer and therefore it cannot be used with a PSA Informational message No toner Off line Online Paper jam Paused printing queued Service required spooling The IP Address you entered is the address of this PSA Please enter the name
52. saved file or firmware image Informational message Informational message The status is currently not available but will be updated in a few moments Reboot the PSA and then retry the backup restore or upgrade process Reboot the PSA and then retry the backup restore or upgrade process Confirmation message The data has been backed up and is ready to be saved to the specified location Confirmation message Confirmation message The specified file is not a valid PSA configuration upgrade file The specified upgrade file cannot be used to upgrade this PSA Please check for a newer upgrade file The upgrade file has been transferred successfully You will need to restart your PSA for the upgrade to take effect The upgrade has successfully completed The upgrade etc is in progress This appliance cannot be configured upgraded with this upgrade restore file version Please check for a newer version upgrade file Validating the checksum Event Log Page Click here to view possible events in the Event Log Message Please select at least one category to view Retype the complete path to the configuration file for example C TEMP file HP or click Browse to find the saved file or firmware image Verify the file is a valid PSA file whose firmware version is later than the current firmware for your PSA Then retry the upgrade process Confirmation message Confirmation message
53. schedule to run for one minute on the Uninterruptable Power Supply UPS battery This permits a safe shutdown of the PSA However during this period the UPS reached a power level that was too low and in response to this the PSA shut itself down The battery might be weak or old Or the power might have cycled multiple times but the battery did not have a chance to recharge Action Try recharging the UPS battery or replacing the battery with a new one Shutdown initiated UPS battery run time expired 107 Level Informational Category Administrative Description After a power disruption the PSA is scheduled to run for one minute on the UPS Uninterruptable Power Supply battery This permits a safe shutdown of the PSA That one minute period has expired so the PSA shut itself down Shutdown cancelled Normal power restored 108 Level Informational Category Administrative Description Normal power has been restored to the PSA so the PSA is no longer reliant on the UPS Uninterruptable Power Supply battery backup Additionally the shutdown that was planned for the PSA due to the power disruption has been cancelled High disk utilization disk utilization is at 80 90 of capacity 109 Level Error Category Administrative Description The spool partition on the PSA is at 80 90 of capacity This may be due to one of the following conditions e one or more printers are not online e connectivity to one or more printers has
54. specify NT Domain Controllers is selected try selecting Automatically discover NT Domain Controllers instead o As atest try the following Check the PSA s Microsoft Network Settings page by opening the PSA s web interface If the PSA is configured to Enable NT Domain Authentication so that it is joining the domain re configure it so that it does not join a domain then see if printing is faster If it is consistently faster when not joined to the domain than when it is be sure that the print server has the most current firmware use the link above If it is possible to use the print appliance when it is not joined to a domain do so temporarily then contact HP support o Check the PSA s Microsoft Network Settings page under Networking in the PSA s web interface If the PSA is configured to use a WINS Server Address make sure that address is correct If it is type the following command at the command prompt of a Windows NT or Windows 2000 computer nbtstat a PSA_hostname where PSA_hostname is the host name of your PSA The response should include three to five entries If the response is a host not found message there may be a problem with the WINS server Contact your network administrator for this problem 11 Jobs are getting stuck on the PSA for one of my printers 12 13 The PSA uses LPD to send print jobs to its printers If the print server connecting a printer to the network does not support LPD jobs for that print
55. that weigh up to 60 pounds Do not place heavier printers on the appliance 1 Turn the appliance so it rests on its top 2 The appliance ships with a set of four self adhesive rubber feet on a paper backing sheet Remove each foot from the paper backing Install each foot on the bottom of the appliance in the indentation provided Press each foot firmly into place 3 Turn the appliance over so it rests on its rubber feet 4 Locate the appliance for easy access to a power source and network connection It may be located on any solid surface in a rack shelf or under a printer 5 Connect cables Rackmount I nstallation The appliance may be rack mounted into industry standard instrument computer racks The appliance is shipped with a pair of rack mount brackets with four screws There are also four screws for mounting the brackets to the appliance in the rack The appliance requires 1 5 rack units RU of vertical space It does not require rails for rack mounting Note The rackmount installation should be performed by an experienced individual using appropriate tools and exercising appropriate safety precautions Use the following procedure to perform the rackmount installation we Attach the rackmount brackets to the sides of the appliance Position the appliance in the rack Install the appliance into the rack Use all of the provided screws in both vertical rails of the rack Caution To prevent unstable mounting of
56. the PSA or Using the Add Print Share Wizard While there is no fixed limit on the number of printers that can be attached to the PSA many factors impact performance in your environment and create an effective limit for your environment and use model Factors that impact performance include the number of users printing through the PSA how frequently the users print whether NT Domain security is enabled the size of the jobs being printed the types of jobs being printed for example color print jobs and how many printers are installed on the PSA Both UNIX and Windows clients can simultaneously print to the same printer UNIX clients ignore any Windows driver selections Numerous printer drivers are factory installed Click here to see a list of those drivers To add a printer follow these steps Note If Domain Authentication is not enabled on the Microsoft Networking Settings page the administrator logged onto the PC must have a local administrator account with the same name and password as their domain account If Domain Authentication is enabled the administrator must either have a local account on the PSA with the same user name and password as their domain account or a domain account for the administrator must be added to the PSA 1 Select Print Shares in the web interface under Print Services 2 Click is add A The Add Print Share wizard will be launched o Add Print Share Step 1 of 3 Type the IP address or hostname an
57. the box for Enable Domain Authentication is not checked With Domain authentication disabled local administrator accounts must be used to manage the PSA and access the web interface because all domain administrator accounts will be disabled by this action as well Granting Printer Access or Authority to Users and Groups On Security page for a specific print share assign domain users and or groups appropriate access for that print share The Account s to Add to List box on the left contains all of the group or user names within the selected domain Select from this list to grant access to the print share and click add After the account has been granted access its name will be moved from the Account s to Add to List box to the Current Account s in List box By default every user on the PSA has print access to any newly created print share Administrator Accounts for the PSA There are two types of administrator accounts on the PSA e Local Administrator Accounts user names and passwords are stored on the PSA and are not synchronized with any domain accounts e Domain Administrator Accounts user names and passwords are synchronized with domain accounts If domain authentication is enabled on the Microsoft Network Settings page both local and domain administrator accounts can be added to the PSA If domain authentication is not enabled on the Microsoft Network Settings page only local administrator acco
58. the printers and faxes folder WN Or On the client workstation click Start and then choose Printers and Faxes Under Printer Tasks select Add a printer Double click the Add Printer icon Select the Network print server radio button Select the Connect to this printer radio button and type the Universal Naming Convention UNC path for example spoolerl1 printer1 See Microsoft documentation for more information about UNC Click Next Answer subsequent questions to complete the driver installation Pa Nie oI Bypassing Point and Print Installing printers on each client computer is required in order for clients to be able to print using the PSA With the Microsoft Point and Print technology when a printer is added to a client an associated driver is automatically installed on the client also This helps make printer installation easy However the driver associated with a given printer can only be managed at an administrator level so changes to that driver such as enabling duplex or changing the driver itself will be reflected on all Windows NT 2K and XP clients using that printer only one driver can be associated with a given printer In order to bypass this functionality clients can install a local printer that uses a local port to print through the PSA Note This requires the client to install a driver locally Because the installed printer is viewed by the computer as a local printer it will not receive job status f
59. the specified print share To change the driver for the print share highlight a different driver and click Er Client Side Rendering Do not select this option unless you are having problems with your W2K drivers working properly Symptoms include trouble with N up printing multiple pages in a reduced format on one page booklet style format the print job into a printed booklet watermark print a watermark on each page of the document ZoomSmart scales a letter sized A4 document or poster to tabloid A3 or vice versa back to front prints the document in reverse order rotate 180 degrees rotates the document layout but not the paper If you are having problems with any of these features first update the firmware If the problem persists reinstall the driver and select Client side rendering on this page The problem should then be resolved hp print server appliance Ghent Printer Crier MOEREN C Use cient side resedering with this driver Aol AT 20 divat usualy work en S000 and PF so some TAHATE late dirare a DOG or A wher ey eee in fect AT 4 0 riae When ese divers ara ae io ibe appliance Doy appa in Ie diar Ast aa AT 20 obs WePN Deon wien feo onan he doeniogd bo lhe driver can De propery inpia Atte J Haning 2000507 varwong and AT varmons of chivers mith he same mamas Die SUMMON rion er he MT het a diaa aame ee U erie arenes ie separa PSAs Bet x canal mi Print Share Security Page The Print Share S
60. to install that printer the driver files will not be provided by the PSA and the user will be prompted to provide the printer driver files The driver was not installed successfully Please try again The driver you specified for Windows 2000 XP is really a Windows NT 4 0 driver and has been installed as such Although this driver will probably work you may wish to determine if there is a native 2000 XP driver available for this printer To do this locate and install the native Windows 2000 XP driver in order to ensure this driver works properly with Windows 2000 and Windows XP If you choose not to find the native driver make sure to test the driver thoroughly after it has been installed and initialized Informational The inf file specified might be corrupted or it might not be a driver setup information file Verify that the specified inf file is a printer setup information file and retry If the problem persists try a different copy of the desired driver or consider using a different driver Informational Informational User chose to not replace a driver that was already installed on the PSA Before drivers can be installed Java must be installed and JavaScript enabled in your web browser JavaScript can be enabled in Internet Explorer under Internet Options gt Security tab gt Custom Level button gt Scripting gt Scripting of Java Applets subheading If a Java virtual machine is not installed in the
61. up again These jobs should require no action as they will print after the PSA is powered up again e Jobs in the middle of printing will resume printing when the PSA is powered up again e Jobs that were not yet spooled need to be resent If print operations do not appear normal new jobs do not spool correctly after the outage then power off the PSA and power it back up again After a power outage or any other improper shutdown the PSA might experience so many errors in its file system that it rebuilds the disk from the default image The printers network configuration and drivers will be not be automatically restored The configuration must be restored manually using the Restore functionality with the last configuration manually backed up Configuration Problems Num Condition Possible Cause Solution a a a a can t find the PSA in Network Neighborhood can t print a test page from the PSA to a printer get browser errors when trying to access the PSA can t locate the printer from the client How do I know the printer driver installed on the PSA was installed on the client Or how can I tell whether the updated driver installed on the PSA was successfully installed e The PSA will install itself in the workgroup called workgroup If there are no PCs in this workgroup the PSA will not show up in network neighborhood Microsoft R browsing requires a PC in the workgroup to host a bro
62. user enter cd var spool ipd mkdir printername chown root printername chgrp lp printername chmod 755 printername where printername is the name of the printer on the local computer Configuring Print Queues Using SAM HP UX Systems On HP UX systems the SAM utility can be used to configure remote print queues for printing Before the SAM program is executed select an IP address for the appliance and set up an entry in the etc hosts file on the system running HP UX This is not required if DNS is configured OS 0 00 N Start the SAM utility as a super user Select Printers Plotters from the Peripheral Devices menu Select LP Spooler Select Printers Plotters from the Printers Plotters menu Select Action from the top menu and then select Add Remote Printer or Plotter Complete the Add Remote Printer Plotter screen o The Printer Name field should be the local printer name o Be sure to check the box Remote Printer is on a BSD System Click OK Select Exit from the List menu Exit SAM Printing a Test File To verify that the printer and PSA connections are correct print a test file 1 At the UNIX prompt type lp dprintername file_nam or on a BSD like system lpr Pprintername file_nam where printername is the name of the printer as added to the appliance and file_name is the file to be printed 2 To get print queue status type the following at the prompt lpstat printername or on a
63. with any other library facilities This must be distributed under the terms of the Sections above b Give prominent notice with the combined library of the fact that part of it is a work based on the Library and explaining where to find the accompanying uncombined form of the same work 8 You may not copy modify sublicense link with or distribute the Library except as expressly provided under this License Any attempt otherwise to copy modify sublicense link with or distribute the Library is void and will automatically terminate your rights under this License However parties who have received copies or rights from you under this License will not have their licenses terminated so long as such parties remain in full compliance 9 You are not required to accept this License since you have not signed it However nothing else grants you permission to modify or distribute the Library or its derivative works These actions are prohibited by law if you do not accept this License Therefore by modifying or distributing the Library or any work based on the Library you indicate your acceptance of this License to do so and all its terms and conditions for copying distributing or modifying the Library or works based on it 10 Each time you redistribute the Library or any work based on the Library the recipient automatically receives a license from the original licensor to copy distribute link with or modify the Library subject to these
64. you develop a new program and you want it to be of the greatest possible use to the public the best way to achieve this is to make it free software which everyone can redistribute and change under these terms To do so attach the following notices to the program It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty and each file should have at least the copyright line and a pointer to where the full notice is found lt one line to give the program s name and a brief idea of what it does gt Copyright C 19yy lt name of author gt This program is free software you can redistribute it and or modify it under the terms of the GNU General Public License as published by the Free Software Foundation either version 2 of the License or at your option any later version This program is distributed in the hope that it will be useful but WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE See the GNU General Public License for more details You should have received a copy of the GNU General Public License along with this program if not write to the Free Software Foundation Inc 59 Temple Place Suite 330 Boston MA 02111 1307 USA Also add information on how to contact you by electronic and paper mail If the program is interactive make it output a short notice like this when it starts in an interactive mode Gnomo
65. 3 1994 1995 1996 1997 1998 Sleepycat Software All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 Redistributions in any form must be accompanied by information on how to obtain complete source code for the DB software and any accompanying software that uses the DB software The source code must either be included in the distribution or be available for no more than the cost of distribution plus a nominal fee and must be freely redistributable under reasonable conditions For an executable file complete source code means the source code for all modules it contains It does not mean source code for modules or files that typically accompany the operating system on which the executable file runs e g standard library modules or system header files THIS SOFTWARE IS PROVIDED BY SLEEPYCAT SOFTWARE AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FORA PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL SLEEPYCAT SOFTWAR
66. 6 1998 2002 Other Software Licenses This product includes software licensed under the GNU General Public License and other open source licenses Copies of these licenses and information about obtaining source code for software licensed under the GNU GPL are available below To obtain source code for product software licensed under the GNU GPL and under Sleepycat Software make a written request to Hewlett Packard at Hewlett Packard Company Connectivity Technical Marketing 8000 Foothills Blvd MS 5661 Roseville CA 95747 This product includes software developed by the Open SSL Project for use in the Open SSL Toolkit http www openssl org Gregory Trubetskoy Eric Young Tim Hudson Copyright c 2000 Carnegie Mellon University All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 The name Carnegie Mellon University must not be used to endorse or promote products derived from this software without prior written permission For permission or any other legal details please contact Offi
67. A be configured via TELNET No You can assign IP addresses via DHCP the front panel and a web browser After an IP address is assigned you must use a web browser to finish configuring the PSA Is the PSA compatible with non HP print servers Yes Any print server that supports LPD should work with the PSA You may have to know the proper LPD remote queue name for the print server Many print servers will work without specifying a remote queue name use the default HP PRINT SERVER setting however some require a special string in order to work The LPD remote queue name can be obtained from the print server vendor The PSA does not show up in Network Neighborhood e The PSA will install itself in the workgroup called workgroup If there are no PCs in this workgroup the PSA might not show up in network neighborhood Microsoft R browsing requires a PC in the workgroup to host a browse list The administrator must change the workgroup name through the Web interface on the PSA To choose another workgroup name for the PSA 1 Access the PSA s web interface by typing the IP address in a supported browser window 2 Click Microsoft Network Settings page under Networking in the PSA s web interface 3 In the window labeled Windows NT Domain or Workgroup change the name to the correct workgroup name 4 Click Cease e A less common cause is that the Master Browser list Network Neighborhood has not yet been updated with the new PSA Depe
68. ARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Copyright c 1995 1997 The Apache Group All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 All advertising materials mentioning features or use of this software must display the following acknowledgment This product includes software developed by the Apache Group for use in the Apache HTTP server project http www apache org 4 The names Apache Server and Apache Group must not be used to endorse or promote products derived from this software without prior written p
69. AUTHOR BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Additionally Ilsearch c fnmatch c getcwd c snprintf c strcasecmp c and fnmatch 3 bear the following UCB license Copyright c 1987 1989 1990 1991 1993 1994 The Regents of the University of California All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES
70. Administrative Description The PSA was shut down safely This is generally done by using the power button on the front panel or through Restart in the web interface under Maintenance Completed standard startup 103 Level Informational Category Administrative Description The PSA completed startup The preceding shutdown was a safe shutdown typically through the power button on the front panel or through the web interface using Restart in the web interface under Maintenance Note If the administrator s name cannot be determined and is displayed as None then it must have been changed using the front panel Completed non standard startup followed abrupt shutdown 104 Level Informational Category Administrative Description The PSA completed startup after an abrupt shutdown perhaps from a power disruption Action Non standard startups may require the PSA to restore the operating system from a safe copy If configuration data for example networking printer and driver settings is no longer resident on the PSA use a backup to restore the settings Running on UPS battery due to power failure 105 Level Informational Category Administrative Description A power failure occurred and the PSA began relying on the Uninterruptable Power Supply UPS battery for its power Shutdown initiated due to low UPS battery 106 Level Informational Category Administrative Description After a power disruption the PSA is
71. BSD like system lpq Pprintername where printername is the designated printer Example lpq Pappliancel Front Panel Links to related pages gt Troubleshooting the PSA The following activities can be performed from the front panel Start Up or Shut Down the PSA Configure the IP Address for the PSA Configure the Link Speed and Duplex Mode for the PSA 4 Set or Change the Front Panel Password The front panel on the HP Print Server Appliance 4250 has the following components Power LED LCD Display mN p N Dee a Mon Uun 3 002 R v O C ee Alert LED Network LED Disk LED Or Oi Oz Oi Os LEDs There are four indicator lights LEDs on the front of the PSA Understanding how the lights function is important for proper operation of the PSA This page describes normal and problem LED status displays LED LED Name Description Power LED ON when power is supplied to the PSA and it is turned on LIT when there is a connection between the PSA and other network devices BLINKS when there is network activity between the PSA and other network devices Network Activity LED Disk Activity LED ON when there is disk activity on the PSA Alert LED OFF during normal operations ON during bootup and shutdown Power Button Starting Up and Shutting Down the PSA Press the Power button to power up the PSA The bootup process begins When the device is powe
72. CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL HARVARD OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Copyright c 1998 1999 2000 Thai Open Source Software Center Ltd and Clark Cooper Permission is hereby granted free of charge to any person obtaining a copy of this software and associated documentation files the Software to deal in the Software without restriction including without limitation the rights to use copy modify merge publish distribute sublicense and or sell copies of the Software and to permit persons to whom the Software is furnished to do so subject to the following conditions The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software THE SOFTWARE IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERC
73. CP IP and DNS page in the web interface under Networking are configured correctly and that the network infrastructure such as the default gateway is configured and is operational e If the problem persists try specifying the list of Domain Controllers using IP addresses instead of NetBIOS or DNS names Authentication failed user authentication via Microsoft networking was unsuccessful 203 Level Error Category Security Description The user attempted to access the PSA using NT native tools but the request was denied because either the user identity was not confirmed or the user was not authorized to use the PSA One or more of the following errors may have occurred e The user name and password combination was not valid e The user logged into a machine that was not joined to the NT domain Action e Retype the user name and password combination e If the user machine was not in the same domain as the PSA or was not in a trusted domain the user should type domain user name and password for correct authentication e Verify that the user account exists e Monitor the log file for additional unauthorized access attempts Permission denied user not allowed to connect to printer 205 Level Error Category Security Description The user tried to perform an action without the proper access level Action e If NT Domain authentication has been enabled on the Microsoft Network Settings page in the web interface under Network
74. E BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Copyright c 1995 1996 The President and Fellows of Harvard University All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 All advertising materials mentioning features or use of this software must display the following acknowledgement This product includes software developed by Harvard University and its contributors 4 Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY HARVARD AND ITS
75. For NT Domain networks administrators can easily restrict print administration and services to specific groups or users Valid access levels are e Print print pause and delete your own print jobs e Manage Documents print pause and delete other user s print jobs e Full Control print pause and delete other user s print jobs delete printers and change security settings using native NT tools e No Access Physical Specifications Attribute Dimensions Weight Temperature Network connection Serial port Acoustic noise Minimum Hard Drive Minimum Processor Speed Recommended Number of Printers Supported Largest Spoolable File Size Specification 441 millimeters mm 17 4 inches W x 323 mm 12 7 inches D x 63 mm 2 5 inches H 4 6 kilograms 10 1 pounds Operating 5 degrees Celsius C to 40 degrees C 41 degrees Fahrenheit F to 104 degrees F Non operating 40 degrees C to 70 degrees C 40 degrees F to 158 degrees F RJ 45 DB 9 supports all APC uninterruptible power supplies with a Simple Signaling cable APC part 940 0020B 52 dB 10 Gigabytes 300 Megahertz 50 2 Gigabytes Minimum Spooling Capacity 7 Gigabytes Electrical Specifications Attribute Specification Power requirements 120 240 VAC at 50 60 Hz Power consumption 100 127 V 1000mA 200 240 V 750mA Power connection EC 320 Environmental Specifications Attribute Specification Relative humidity 80 pe
76. HANTABILITY FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM DAMAGES OR OTHER LIABILITY WHETHER IN AN ACTION OF CONTRACT TORT OR OTHERWISE ARISING FROM OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE Copyright C 1995 1998 Eric Young eay cryptsoft com All rights reserved This package is an SSL implementation written by Eric Young eay cryptsoft com The implementation was written so as to conform with Netscapes SSL This library is free for commercial and non commercial use as long as the following conditions are aheared to The following conditions apply to all code found in this distribution be it the RC4 RSA Ihash DES etc code not just the SSL code The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson tjh cryptsoft com Copyright remains Eric Young s and as such any Copyright notices in the code are not to be removed If this package is used in a product Eric Young should be given attribution as the author of the parts of the library used This can be in the form of a textual message at program startup or in documentation online or textual provided with the package Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistri
77. Hmm DES Engin iid enbai ha Giir Harte Pan c E 4 Click K Removing the SNMPv3 Account To remove the SNMPv3 account uncheck the Enable SNMPv3 box and click apply This will destroy all SNMPv3 accounts that have been created including accounts that were cloned from the original It is also important to note that the SNMP agent s engine ID will change each time the SNMPv3 account is deleted Print Shares Links within this page Print Shares Option Adding a Print Share Deleting a Print Share gt Viewing and Managing Print J obs gt Print Share Properties ah Print Share Security ay Printer Drivers Printer Driver Management Adding New Drivers to the PSA Security Warning When Adding New Drivers Links to related pages Installing Printers on Clients Related System Messages Troubleshooting the PSA Print Shares Option After Print Shares is selected from the menu in the web interface under Print Services the Print Share List page is displayed On this page administrators can e view and manage print jobs e add print shares e modify existing print shares e delete a print share and all of its jobs Print Share List Page Field Names Share Name Status Description Name of the print share as typed in the Print Share Name field on the Add Print Share page in the web interface This name is displayed in Network Neighborhood or in My Network
78. I HP Print Server ap Appliance 4250 H User s Guide Click a title to view a topic Home General Information Product Overview Product Specifications Setting the Date and Time Initial Set Up Getting Started Installing Printers on Clients Front Panel Hardware Installation Web Interface Networking TCP IP and DNS Settings Microsoft Network Settings LPD Printing SNMP Settings Print Shares and Drivers Managing Print Shares Installing Print Shares Managing Printer Drivers Security Microsoft NT Authentication Administrators LPD Front Panel Password SSL Certificate Maintenance Backup Restore Upgrade and Reboot Troubleshooting System Summary Page Diagnostics Page Event Log Event Log Messages System Messages Troubleshooting Tips Questions Support Contacting HP Warranty and Regulations HP Print Server Appliance Documentation for Firmware Version 2 5 x 1999 2004 Hewlett Packard Company Product Overview Links within this page Product Introduction Operation and Management Product Description Compatibility with HP Print Servers Compatibility with Other Non HP Print Servers 4 4 4 Product Updates Links to related pages Technical Specifications Product I ntroduction Figure 1 The HP Print Server PSA 4250 The HP Print Server Appliance 4250 is a state of the art device for managing and monitoring printing over a network It is a network device that has b
79. IABLE TO YOU FOR DAMAGES INCLUDING ANY GENERAL SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Libraries If you develop a new library and you want it to be of the greatest possible use to the public we recommend making it free software that everyone can redistribute and change You can do so by permitting redistribution under these terms or alternatively under the terms of the ordinary General Public License To apply these terms attach the following notices to the library It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty and each file should have at least the copyright line and a pointer to where the full notice is found lt one line to give the library s name and a brief idea of what it does gt Copyright C lt year gt lt name of author gt This library is free software you can redistribute it and or modify it under the terms of the GNU Library General Public License as published by the Free Software Foundation either version 2 of the License or at your option any later versi
80. If the distribution and or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries so that distribution is permitted only in or among countries not thus excluded In such case this License incorporates the limitation as if written in the body of this License 9 The Free Software Foundation may publish revised and or new versions of the General Public License from time to time Such new versions will be similar in spirit to the present version but may differ in detail to address new problems or concerns Each version is given a distinguishing version number If the Program specifies a version number of this License which applies to it and any later version you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation If the Program does not specify a version number of this License you may choose any version ever published by the Free Software Foundation 10 If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different write to the author to ask for permission For software which is copyrighted by the Free Software Foundation write to the Free Software Foundation we sometimes make exceptions for this Our decisi
81. JavaScript can be enabled in Internet Explorer under Internet Options gt Security tab gt Custom Level button gt Scripting gt Scripting of Java Applets subheading If a Java virtual machine is not installed in the browser refer to Sun Microsystem s web site or to Microsoft s web site for information about downloading one Then make sure the virtual machine is turned on In Internet Explorer go to Internet Options gt Security tab gt Custom Level button gt Microsoft VM Select any option other than disable I am going to upgrade to firmware version 2 4 x Will my printer drivers have to be initialized again If migrating to firmware version 2 4 x printers that had been added to earlier firmware versions 2 3 x or before need to be associated with their driver again To do this easily use either the PSA s web interface or Web J etadmin In the PSA s web interface go to the Print Shares page on the menu in the web interface under Print Services and then click Drivers In the drop down list select any other driver and click I ok io o Then select the original driver and clic again In Web Jetadmin under Driver Management access the Printer Drivers page and click the Initialize button Select the appropriate driver and click the Initialize button again I am trying to add a printer driver to the PSA but keep getting an unauthorized to perform this action error message In order to install
82. Johnny Lee Onno van der Linden Igor Mandrichenko Steve P Miller Sergio Monesi Keith Owens George Petrov Greg Roelofs Kai Uwe Rommel Steve Salisbury Dave Smith Christian Spieler Antoine Verheijen Paul von Behren Rich Wales Mike White This software is provided as is without warranty of any kind express or implied In no event shall Info ZIP or its contributors be held liable for any direct indirect incidental special or consequential damages arising out of the use of or inability to use this software Permission is granted to anyone to use this software for any purpose including commercial applications and to alter it and redistribute it freely subject to the following restrictions 1 Redistributions of source code must retain the above copyright notice definition disclaimer and this list of conditions 2 Redistributions in binary form must reproduce the above copyright notice definition disclaimer and this list of conditions in documentation and or other materials provided with the distribution 3 Altered versions including but not limited to ports to new operating systems existing ports with new graphical interfaces and dynamic shared or static library versions must be plainly marked as such and must not be misrepresented as being the original source Such altered versions also must not be misrepresented as being nfo ZIP releases including but not limited to labeling of the altered versions with the na
83. LPD page in the PSA s web interface under Network Settings 5 Can I print in a Novell environment Yes If the Microsoft networking client is loaded and the IP address is properly configured on the client and printer then the PSA can be used However the PSA will not appear as a Bindery object or as an NDS object on the Novell server 6 What is the limit on the number of jobs that can be spooled Up to 10 000 jobs can be spooled at a time which might be further restricted by the disk space available on the PSA 7 How are print jobs sent to the PSA Clients send print jobs via SMB or LPD to the PSA SMB Server Message Block is the normal Microsoft 10 networking protocol LPD Line Printer Daemon is an Internet standard RFC 1179 supported by many operating systems How are print jobs sent from the PSA to the printer The PSA uses LPD to send the print job to the printer I am trying to print in Landscape mode Duplex mode or multiple copies but the margins are offset If you have not done so upgrade your firmware to version 2 4 x and initialize the driver for that printer Delete the print driver from the computer and delete the port created for it Install the print driver on the computer as a network printer and browse to the print queue on the PSA Why is the performance so slow when connecting to the PSA via Network Neighborhood or when opening a printer s Property Page in Network Neighborhood Sever
84. MPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Note The above license is copied from the BSD license at http www opensource org licenses bsd license html substituting the appropriate references in the template end This program bzip2 and associated library libbzip2 are copyright C 1996 2000 Julian R Seward All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 The origin of this software must not be misrepresented you must not claim that you wrote the original software If you use this software in a product an acknowledgment in the product documentation would be appreciated but is not required 3 Altered source versions must be plainly marked as su
85. NT 4 0 inf file The name of the printer driver specified in the indicated file does not match the name of the printer driver in the other driver inf files being installed If you are trying to install both an NT and a 2K driver consider adding two printers to the PSA one with the NT driver and the second same printer with a different name with a 2K driver If you are trying to install a 9x driver and the name does not match it is possible that the driver names provided for different operating systems are not the same If this is the case please contact HP support Informational In order for drivers to be deployed to client machines via point and print the drivers must be properly initialized If a driver has failed to initialize it will be disabled by the PSA and cannot be enabled but it can be re installed A disabled driver may still be associated with a printer but when a client tries to install that printer the driver files will not be provided by the PSA and the user will be prompted to provide the printer driver files Informational In order for drivers to be deployed to client machines via point and print the drivers must be properly initialized If a driver has failed to initialize it will be disabled by the PSA and cannot be enabled but it can be re installed A disabled driver may still be associated with a printer but when a client tries to install that printer the driver files will not be provi
86. NU Library General Public License applies to certain designated libraries This license is quite different from the ordinary one be sure to read it in full and don t assume that anything in it is the same as in the ordinary license The reason we have a separate public license for some libraries is that they blur the distinction we usually make between modifying or adding to a program and simply using it Linking a program with a library without changing the library is in some sense simply using the library and is analogous to running a utility program or application program However in a textual and legal sense the linked executable is a combined work a derivative of the original library and the ordinary General Public License treats it as such Because of this blurred distinction using the ordinary General Public License for libraries did not effectively promote software sharing because most developers did not use the libraries We concluded that weaker conditions might promote sharing better However unrestricted linking of non free programs would deprive the users of those programs of all benefit from the free status of the libraries themselves This Library General Public License is intended to permit developers of non free programs to use free libraries while preserving your freedom as a user of such programs to change the free libraries that are incorporated in them We have not seen how to achieve this as regards changes in header f
87. Power Cord Requirements The following localization options are available for the power cord The power cord must be be a standard I EC 320 female power cord terminated by a male plug appropriate for the country region of use Country Region Option Code Power Cord U S ABA 8120 6805 Canada excluding Quebec Argentina AKY 8121 0766 Brazil AKY 8121 0670 Chile AKY 8121 0765 Europe including 401 8120 6802 Austria Belgium Finland France Germany Italy Netherlands Norway Portugal Spain Sweden Denmark ACE 8120 6806 Switzerland AR8 8120 6807 United Kingdom ACC 8120 0550 Singapore South Africa ACQ 8120 6808 Australia ABG 8120 6810 New Zealand Hong Kong SAR AB5 8120 0550 Supported Clients Clients are networked PCs that submit print jobs to the PSA The PSA can accept print jobs from the following clients Windows 95 Windows 98 Windows NT 4 0 Windows 2000 Windows ME Windows XP Any RFC 1179 compliant LPD client including not all LPD implementations are RFC 1179 compliant o HP UX 10 x and above o Solaris o Linux Note The Microsoft Point and Print feature for Windows NT and Windows 2000 is only supported on an x86 PC The PSA provides easy consistent PSA management for multiple PSAs simultaneously An SNMP agent provides network device information to monitor configure and control networked systems It provides SNMP clients a method of communicating with PSAs for administration over a network Oper
88. S Settings Page Microsoft Network Settings Page LPD Printing Page SNMP Settings Page 4 Under Security sy Administrators Page SSL Certificate Page Under Maintenance as Backup Restore Upgrade and Restart Pages Under Diagnostics Event Log Page Links to related pages Diagnostics Event Log Messages Frequently Asked Questions System Summary Troubleshooting Add Printer Wizard and Add Driver Wizard Message driver failed to initialize driver failed to install driver_name installed as a Windows NT 4 0 driver driver installing driver_name driver invalid inf file driver successfully initialized driver successfully installed driver keeping existing driver Adding drivers requires Java Your browser doesn t have J ava or has disabled J ava To enable J ava change your browser s settings If you re using Internet Explorer 6 you probably need to download J ava Search the Microsoft web site for Q299672 to learn how to install Microsoft s Java Component Application Error Driver Management software not installed properly Explanation Remedy In order for drivers to be deployed to client machines via point and print the drivers must be properly initialized If a driver has failed to initialize it will be disabled by the PSA and cannot be enabled but it can be re installed A disabled driver may still be associated with a printer but when a client tries
89. SA Try accessing the PSA by selecting Start from the task bar and select Find and Computer 13 get prompted for a Whether you get prompted for a password and what the password password when I use a prompt looks like are a function of your web browser and its web browser to access configuration If the PSA is a member of a domain it will always ask your the PSA even though the browser to use your existing Windows Domain authentication Microsoft s PSA is a member of a Internet Explorer uses a concept of security zones to determine whether domain the web server in this case the PSA is within the Intranet Zone There are a number of ways to include the PSA in the Intranet Zone but the easiest is to open Tools gt Internet Options gt Connections gt LAN Settings gt Advanced and enter the full name the IP address and the short name in the Exceptions box This will cause Microsoft s Internet Explorer to connect directly with the PSA and avoid your proxy server By default Internet Explorer considers direct connections in the Intranet Zone Consult your Microsoft Internet Explorer documentation to determine other ways to include the PSA in the Intranet Zone If you are using proxy servers in your environment and you want to use the single sign on functionality your web browser will need to be set up to bypass the proxy server for the PSA s host name if it includes periods and IP address An administrator can vie
90. SA did not successfully join the domain No account was created for the device Try retyping the administrator name and password and rejoining the domain The domain controller that has been manually specified is not part of the domain that the PSA is joined to This field s value is being assigned by DHCP If you remain in DHCP mode your changes to this field will be lost WINS server IP address cannot be contacted WINS server IP address has no entry for this PSA You must specify your domain administrator name and password to join the NT domain Your Microsoft networking settings have been updated LPD Printing Page Message Invalid Hostname Hostnames must be alphanumeric characters with no spaces Dashes and periods are acceptable Your LPD printing settings have been updated SNMP Settings Page Message Duplicate I P Address and Port Number Illegal Community Name Valid characters are characters Invalid Community Name length Maximum length is length Internal Error SNMPV3AccountAlreadyI nstalled Invalid character in Authentication Key Valid 0 9 a f A F Invalid character in Privacy Key Valid 0 9 a f A F Invalid I P Address Invalid length for Authentication Key Invalid length for Privacy Key Invalid length for User Name Self explanatory Informational Informational Specify the Domain Administrator Name and Domain Administrator Password Confirmation message Explanation
91. SSO Basic Authentication CE E tet tee de Configuring Internet Explorer Links to related pages Related System Messages Troubleshooting the PSA Administrator Accounts Use the Administrators page to change passwords or add account names for local and domain administrator accounts There can be multiple administrator accounts for the PSA but all accounts have the same privileges There must always be at least one local administrator account on the PSA Note The administrator account names and passwords are not related to the front panel password of the PSA which is set and changed through the front panel Caution If all local administrator passwords are forgotten the only way to gain access to the PSA through a local administrator account is to reset the PSA to factory defaults using the front panel After the PSA is reset to factory defaults all configuration information will be lost including network settings and printers and the PSA will possibly revert to a previous version of the firmware To access the Administrators page follow these steps 1 Log on to the web interface The default is admin for the user name and admin for the password 2 On the menu under Security click Administrators The Administrators page is displayed Administrators Page Page Field Description Names Local Lists all local administrator accounts added to the PSA Local accounts are stored on the Administrators PSA a
92. Side rendering Power Outages 1 How do I connect an uninterruptible power supply UPS The PSA supports APC UPSs only in the Simple Signaling mode with a Simple Signaling cable APC part 940 0020B Connect the UPS cable to the connector labeled UPS on the back of the PSA Note The Simple Signaling cable is not included with the PSA or with the APC UPS This cable can be ordered from APC APC part 940 0020B 2 How does an uninterruptible power supply UPS work with the PSA when the power fails The UPS communication cable enables the UPS to signal the PSA to perform an orderly shutdown after a delay of about 60 seconds in the event of a power failure During an orderly shutdown processes are closed and data is saved No configuration is necessary to enable UPS support other than simply connecting the DB 9 cable 3 What happens if the PSA experiences an unplanned power interruption After a power outage the PSA will automatically recover and rebuild its settings as necessary To reduce the chance of data loss the PSA can be connected to a UPS See the questions regarding UPS below Print jobs that were printing and print jobs that were spooled but not printing will automatically resume when the PSA is powered up again Print jobs that had not been spooled yet need to be resent Loss of power could initially cause corruption of the data on the PSA hard disk However the PSA is designed to make internal data loss unlikely si
93. THERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE The licence and distribution terms for any publically available version or derivative of this code cannot be changed i e this code cannot simply be copied and put under another distribution licence including the GNU Public Licence Copyright c 1998 2001 The OpenSSL Project All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 All advertising materials mentioning features or use of this software must display the following acknowledgment This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit http www openssl org 4 The names OpenSSL Toolkit and OpenSSL Project must not be used to endorse or promote products derived from this software without prior written permission For written permission please contact openssl core openssl org 5 Products derived from this software may not be called OpenSSL nor may OpenSSL appear in their nam
94. Total Packets Received Total Packets Transmitted Bad Packets Received Received Packets Dropped Framing Errors Received Transmit Packet Errors Transmit Packets Dropped Transmit Packet Overruns Transmit Collisions Total number of network packets this unit has received since the last reboot Total number of network packets this unit has transmitted since the last reboot Total number of improperly formatted network packets received since the last reboot A large number of bad packets may indicate network problems Number of packets dropped since the last reboot because the receive buffer is full Number of improperly formatted frames received since the last reboot Total number of errors that occurred since the last reboot while attempting to transmit Number of attempted transmit packets dropped since the last reboot because of excessive collisions Number of packets dropped since the last reboot while attempting to transmit because the receive buffer is full Number of collisions encountered since the last reboot while attempting to transmit packets Event Log Links within this document Sy Event Log Page Buttons on the Event Log Page Fields on the Event Log Page Event Log Filters Links to related documents Event Log Messages The Event Log is accessible through the web interface under General It contains information about the appliance to facilitate troubleshooting and maintenance at y
95. Upgrade page type the complete path to the firmware image on the local hard drive for example C TEMP UPGRADE HP or click Browse to find the firmware image downloaded in step 2 hi Click install upgrade to upload the upgrade file to the PSA After the upgrade has completed the Overview page is displayed System Summary Links to related pages Troubleshooting the PSA Viewing and Printing the System Summary Page From the Web Interface This page explains how to view and print the PSA System Summary from the web interface PSA settings are shown on the System Summary page To access this page select System Summary in the web interface under Diagnostics This page can be printed using the print function of the browser The System Summary page has the following sections General Information on the System Summary Page TCP IP Network Configuration Information Microsoft Network Configuration Information SNMP Configuration Information SNMP Traps Information Administrators Information SSL Configuration Information LPD Configuration Information Print Shares Information t ve vee Installed Printer Drivers Information To refresh this page click refresh General I nformation on the System Summary Page Parameter Description Model Name HP Print Server PSA 4250 Model Number Model number of the PSA Ethernet Address Ethernet address of the PSA Current Firmware Revision Base Factory Firmware Revi
96. accumulating on the PSA for that printer or printers Check the Printer Status on the Diagnostic Report page to see if this is true High spool utilization can also indicate that the PSA is overloaded If the PSA is frequently overloaded some of the printers should be migrated to another PSA DNS WINS Servers The values in this section are updated each time status is gathered Parameter Description DNS IP Address IP address of the DNS server Connection Status Valid statuses are e Connected e Cannot be contacted The DNS server cannot be found It does not respond to a network query or ping e No entry The forward entry the reverse entry or both forward and reverse entries for the PSA are missing from the DNS server These entries should be added to the DNS server WINS IP Address IP address of the WINS server Connection Status Valid statuses are e Connected e Cannot be contacted The WINS server cannot be found It does not respond to a network query or ping e No entry The WINS server automatically adds an entry for the PSA onto the WINS server If there is no entry for the PSA on the WINS server the WINS server is not functioning properly Domain Controllers This section is displayed if Domain Authentication is enabled on the PSA The values in this section are updated each time status is gathered Parameter Description Hostname Host name of the Domain Controller This field is blank if there is no DNS entry
97. again If you are out of memory reboot your system and run the Add Driver Wizard again It is possible that the physical memory usage check would still fail after a reboot if there are a lot of applications that start automatically upon login The user might have to shut down some applications and try again In order to install drivers on your PSA this tool must run an application on your client PC When your browser displays a security message asking if you trust content signed by HP you need to grant the requested privileges in order to install drivers A query is being sent to the PSA to find out which drivers are already installed on the PSA In order to install a driver the user must select a inf file for the printer and OS in question Informational Before drivers can be installed Java must be installed and JavaScript enabled in your web browser JavaScript can be enabled in Internet Explorer under Internet Options gt Security tab gt Custom Level button gt Scripting gt Scripting of Java Applets subheading If a Java virtual machine is not installed in the browser refer to Sun Microsystem s web site or to Microsoft s web site for information about downloading one Then make sure the virtual machine is turned on In Internet Explorer go to Internet Options gt Security tab gt Custom Level button gt Microsoft VM Select any option other than disable In order for drivers to be depl
98. ain controller addresses and e the provided inf files are valid printer setup information files and that the correct operating system has been associated with each inf file Try using a different copy of the desired driver or a different driver If the problem persists please contact HP support Informational Self explanatory In order for drivers to be deployed to client machines via point and print the drivers must be properly initialized If a driver has failed to initialize it will be disabled by the PSA and cannot be enabled but it can be re installed A disabled driver may still be associated with a printer but when a client tries to install that printer the driver files will not be provided by the PSA and the user will be prompted to provide the printer driver files In order for driver initialization to run a FILE port must be installed on your PC Because the driver could not be initialized it has been disabled Please reinstall the FILE port and then reinstall this driver Driver does not match OS The driver information file file_name that was specified for Windows 2000 XP is actually a driver information file for Windows NT 4 0 The specified driver has been installed but it will appear in your driver list as a Windows NT 4 0 driver This driver may or may not be compatible with Windows 2000 XP HP recommends that you test the driver thoroughly For more information about drivers consult the online
99. al Explanation Remedy The common name is the fully qualified name or IP address of the PSA This field can contain up to 64 characters and it cannot be blank or empty The period of time that the certificate is valid for could not be zero or a negative number Explanation Remedy Informational An I O Error occurred while transferring the file Another backup restore upgrade is already in progress Backup Restore Upgrade in progress Error executing setup Reboot appliance to continue upgrading Error processing the restore _or_upgrade_file_name file File corruption has been detected the downgrade process will not complete Generating the backup file Internal error Status status Invalid checksum Invalid file type Invalid upgrade restore file 1 O error generating the backup file 1 O error processing the backup file 1 O error transferring file No backup upgrade file was provided with the restore request No backup file is available to transfer Please retry the backup process No file was provided with the upgrade request The specified file name is not a valid upgrade file Retype the file name and try again Informational Informational Verify the file is a valid PSA upgrade file and then retry the upgrade process Verify the file is a valid restore or upgrade file for the PSA and then retry the restore process Verify the file is a valid PSA file and then re
100. al workarounds or solutions are available Performance issues can be subjective If printing seems to be slow using the PSA compare printing through some other means such as an LPR port on the workstation that prints directly to the printer s IP address A comparison helps to identify general network printer or application problems versus specific print server appliance problems o Upgrade the PSA firmware Click here to download the most current firmware version for the PSA The latest firmware revision 2 4 x or newer should fix the following conditions a Slow printing performance At first printing is fast afterwards printing seems to be very slow Turning the print appliance off then on seems to help Slow Web Pages When attempting to access or make changes to the Web page for the print appliance the Web pages are very slow a Locks up Print appliance locks up or is unable to print Turning the print appliance off then on seems to help o Verify the configuration of the DNS server with the network administrator An incorrectly configured entry on the DNS server for the PSA can cause delays a connecting to a printer in Network Neighborhood a delays displaying the Property page in Network Neighborhood a in printing The PSA must have a correctly configured DNS server and the print server appliance requires entries in both the DNS server s forward and reverse lookup tables If the DNS server is not configured properly when a computer tr
101. ame or the adminstratorname The administrator portion of the administrator name can be up to 20 characters long and include alphanumeric characters and the following special characters Fe Wo OE Vee AF a Retype the Domain Controller Name using only alphanumeric characters with no spaces The following special characters are acceptable dash period Domain and workgroup names can be up to 15 characters long and include alphanumeric characters and the following special characters dash period underscore _ The name of the domain controller is invalid It must be a valid IP address contain up to 255 characters and consist only of alphanumeric characters and the following special characters dash period underscore _ dollar sign The password can be up to 14 characters long and cannot include following characters number sign at sign Retype the PSA name WINS server addresses are written as four numbers separated by periods where the first number is between 1 and 255 and the other three numbers are between 0 and 255 Retype the WINS server address in the format XXX XXX XXX XXX The WINS server address and the IP address must be in the same format The workgroup name typed is not valid Retype the workgroup name Successfully joined the PSA to the domain The PSA did not successfully join the domain because there is difficulty contacting the domain controller The P
102. at remote offices or other locations distant from the servers the speed of printing can be degraded A PSA installed in a remote office can dramatically increase printing performance by eliminating the need for print requests to travel from the remote office to the central site and back to a remote office printer An additional benefit is that if general purpose file application servers go down remote office users can still print many jobs directly using the PSA Operation and Management Once the PSA is configured virtually no management tasks are required However system administrators can monitor print activity manage the printers or alter the configuration of the PSA from anywhere on the network using the PSA s web based graphical user interface and a supported browser or by using Web J etadmin Web J etadmin plug ins have been designed to configure and manage multiple PSAs The Web J etadmin plug ins for PSA firmware version 2 4 x are dependent on Web J etadmin version 7 2 The Web J etadmin plug ins provide LAN administrators and IT managers a single tool to manage their printing environment The plug ins provide the following management capabilities for the PSA Automated migration of printers from Microsoft Windows servers Automated migration of existing printer connections on Microsoft Windows clients Auto discovery of PSAs Batch configuration of most settings Remote print path creation Remote management of printer drivers
103. ata before it is sent out over the network and decrypting the data when it has been retrieved from the network provides data privacy SSL TLS is always enabled on the PSA By default a certificate is automatically created and installed on the PSA To create a newer certificate on the PSA the administrator must provide data to create a key pair and certificate The PSA s web interface always listens on the secure data channel Port 443 HTTPS and on the unsecure data channel Port 80 All transactions between the web browser and the PSA s web interface requiring security take place on this secure port SSL Certificate Page The SSL Certificate page is displayed when SSL Certificate is selected on the menu under Security SSL Certificate Page Field Names Description Installed Type of certificate installed self signed or CA signed Certificate Type New Status of the certificate installed or pending Certificate Status Encryption Low Medium or High strength Encrypt all Select this to redirect all communication through a secure port HTTPS web communication hp print server appliance SSL Certificate Installod Ceniicale Type Seh Signed Now Cerificate Status Installed whew cortibcote ew certcate Entnmtion erengm Low 0ES 56 bi Ad 00 Gat Aid 1 28 il or SE 8 1 56 biih IF trenpi aweh communication Ong hee ll meine Gi wells Fran do HT TES To view the certificate click on the SSL C
104. ations in SNMP are limited to retrieving and modifying management information values and reporting events SNMP v1 v2c and v3 are supported for the 2 4 x firmware An SNMP MIB defining the PSA s SNMP interface is available from www hp com or by contacting HP s support center Supported Printers Any printer or print server that supports the LPD protocol should work with the PSA Supported Web Browsers The following web browsers are supported e Netscape Navigator 6 0 or greater e Microsoft R Internet Explorer 5 5 or greater What Ships in the Box The following are included in the box 1 HP Print Server Appliance 4250 J 7941 2 3 Quick Start Posters English Spanish 5990 4778 French German 5990 4779 and Italian Portuguese 5990 4780 Documentation CD ROM 5069 4434 for the CD and sleeve and 5011 4598 for the CD Rackmount Kit 5069 4433 Power cable oh Security Features The PSA has a front panel password to prevent unauthorized front panel configuration It also has a web administrator name and password which are required to configure the device or manage printers the default user name is admin and the default password is admin Additional web administrator accounts can be added The existing user account information of the NT 4 0 domain name and password is used users or groups of users can be authorized to print through the PSA without requiring the creation of user accounts and passwords on the PSA
105. been disrupted e unusually high printing volume by users Action It is necessary for the administrator to take one or more of the following actions e check online status of printers e check the connectivity of printers e evaluate print network configuration improved throughput can occur with the addition of more printers per PSA or with the reduction of the number of users per PSA Critically high disk utilization disk utilization is at 90 100 of capacity 110 Level Critical Error Category Administrative Description The spool partition on the PSA is at 90 100 of capacity This may be due to one of the following conditions e one or more printers are not online e connectivity to one or more printers has been disrupted e unusually high printing volume by users Action It is necessary for the administrator to take one or more of the following actions e check online status of printers e check the connectivity of printers e evaluate print network configuration improved throughput can occur with the addition of more printers per PSA or with the reduction of the number of users per PSA DHCP provided hostname discarded value is too long or invalid Using manually provided value 111 Level Informational Category Networking Description The hostname provided by DHCP was longer than the maximum number of characters allowed or it included invalid characters This does not include the domain portion of the hostname As a
106. browser refer to Sun Microsystem s web site or to Microsoft s web site for information about downloading one Then make sure the virtual machine is turned on In Internet Explorer go to Internet Options gt Security tab gt Custom Level button gt Microsoft VM Select any option other than disable Try emptying your browser s cache then close down all instances of your browser Then restart your browser If the problem persists please contact HP support Application Error There may be another instance of the HP Add Driver Wizard running on this PC Close down all instances of the Add Driver Wizard then try running the Add Driver Wizard again Application error This application experienced an error error_description Try running it again If the problem persists consult the help file or the on line documentation Possible errors are listed below Add printer driver failure Printer driver is not compatible with OS Insufficient memory Can t build driver info from inf file Initialization setup file queue failure Commit setup file queue failure Access denied Cannot find MFG File not found Server not found Driver not found Canceling Please wait Download Error Add Driver Software There may be another instance of the HP Add Driver Wizard running on this PC or you may be logged to this PC with insufficient privileges Make sure there are no other instances of the Add Driver Wizard running an
107. bute the same sections as part of a whole which is a work based on the Program the distribution of the whole must be on the terms of this License whose permissions for other licensees extend to the entire whole and thus to each and every part regardless of who wrote it Thus it is not the intent of this section to claim rights or contest your rights to work written entirely by you rather the intent is to exercise the right to control the distribution of derivative or collective works based on the Program In addition mere aggregation of another work not based on the Program with the Program or with a work based on the Program on a volume of a storage or distribution medium does not bring the other work under the scope of this License 3 You may copy and distribute the Program or a work based on it under Section 2 in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following a Accompany it with the complete corresponding machine readable source code which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange or b Accompany it with a written offer valid for at least three years to give any third party fora charge no more than your cost of physically performing source distribution a complete machine readable copy of the corresponding source code to be distributed under the terms of Sections 1 and 2 above
108. bute verbatim copies of this license document but changing it is not allowed This is the first released version of the library GPL It is numbered 2 because it goes with version 2 of the ordinary GPL Preamble The licenses for most software are designed to take away your freedom to share and change it By contrast the GNU General Public Licenses are intended to guarantee your freedom to share and change free software to make sure the software is free for all its users This license the Library General Public License applies to some specially designated Free Software Foundation software and to any other libraries whose authors decide to use it You can use it for your libraries too When we speak of free software we are referring to freedom not price Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software and charge for this service if you wish that you receive source code or can get it if you want it that you can change the software or use pieces of it in new free programs and that you know you can do these things To protect your rights we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it For example if you distribute copies of the library whether gratis or for a fee you must give t
109. butions of source code must retain the copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 All advertising materials mentioning features or use of this software must display the following acknowledgement This product includes cryptographic software written by Eric Young eay cryptsoft com The word cryptographic can be left out if the rouines from the library being used are not cryptographic related 4 If you include any Windows specific code or a derivative thereof from the apps directory application code you must include an acknowledgement This product includes software written by Tim Hudson tjh cryptsoft com THIS SOFTWARE IS PROVIDED BY ERIC YOUNG AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FORA PARTICULAR PURPOSE ARE DISCLAI MED IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR O
110. button for this option on the New Certificate page and click The Request Signed Certificate page is displayed Request Signed Certificate Page Field Names Description Common Name Fully qualified domain name or IP Address of the PSA Used to identify the device HPX595 rose hp com Organization Full legal name of your company Organizational Specific department or division within your organization Unit Locality City City in which your organization is physically located State State or province up to 68 characters Province Two character ISO country code Country Region hp print server appliance Request Signed Certificate Please specify the following values 1o uniquely identity the cereale When you are requesting a ceniicale the Canihcate Aughorty will check the fields for accuracy and completeness 1o ensure that the corticale is beng istued to a legtimate organization Comman Mar Organization Organational Ure Localiy Cay Sale minte Country Region Crs CGE an To request a signed certificate from a Certificate Authority follow these steps 1 At a workstation access the web browser and type the IP address for the PSA 2 Log on to the PSA as an administrator The default user name is admin and the default password is admin 3 Under Security on the menu select SSL Certificate See the description of the fields above for more informatio
111. ce Error This Windows system is either out of memory or out of disk space If it is out of disk space delete some files and try again If it is out of memory restart the system and try again Security Failure The security setting of your browser is too restrictive This applet requires access to run an application on your PC and to read and write to file system on your PC Sending query to PSA Specify the location of the driver setup information file inf file and indicate which operating system the driver supports Successfully initialized driver The driver you have selected needs to be initialized using J ava Your browser doesn t have J ava or has disabled J ava To enable J ava change your browser s settings If you are using Internet Explorer 6 you probably need to download J ava Search the Microsoft web site for Q299672 to learn how to install Microsoft s Java Component This driver has not been initialized yet To ensure that this driver will work properly for automatic driver download it needs to be initialized Click to continue This driver has now been initialized and is enabled for automatic driver download The Add Driver Wizard requires that your system s physical memory usage be less than 90 and that there is a minimum of 15MB hard disk space on your client PC in order to execute properly Check your system resources if you are out of disk space delete some files and run the Add Driver Wizard
112. ce of Technology Transfer Carnegie Mellon University 5000 Forbes Avenue Pittsburgh PA 15213 3890 412 268 4387 fax 412 268 7395 tech transfer andrew cmu edu 4 Redistributions of any form whatsoever must retain the following acknowledgment This product includes software developed by Computing Services at Carnegie Mellon University http www cmu edu computing CARNEGIE MELLON UNIVERSITY DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS IN NO EVENT SHALL CARNEGIE MELLON UNIVERSITY BE LIABLE FOR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE DATA OR PROFITS WHETHER IN AN ACTION OF CONTRACT NEGLIGENCE OR OTHER TORTIOUS ACTION ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE Copyright c 1995 2001 The I nternet Software Consortium All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution Neither the name of The Internet Software Consortium DHCP
113. ch and must not be misrepresented as being the original software 4 The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE AUTHOR AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FORA PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Julian Seward Cambridge UK jseward acm org bzip2 libbzip2 version 1 0 of 21 March 2000 The following are the copyrights and redistribution conditions that apply to this copy of the Berkeley DB software For a license to use redistribute or sell Berkeley DB software under conditions other than those described here or to purchase support for this software please contact Sleepycat Software at one of the following addresses Sleepycat Software 394 E Riding Dr Carlisle MA 01741 USA 1 617 633 2429 db sleepycat com Copyright c 1990 199
114. computer com or 192 0 0 192 In order to use the DNS name a DNS server address must be configured on the PSA in the Microsoft Network Settings page in the web interface under Print Services The name must be alphanumeric and can contain hyphens e HP Jetdirect internal card or single port external box Select this if the printer has an internal HP J etdirect print server card or is connected to an external single port HP Jetdirect print server HP J etdirect 3 port external box Some external HP print servers support more than one printer for example the HP J etdirect 500X For these cases choose the port to which the printer is connected Other print server Select this option if the target print server is not an HP Jetdirect print server Many print servers will work well with the default selections of Hewlett Packard J etdirect Print Server If however the print jobs do not appear on the printer select this option and complete Remote Queue Name with the remote queue name recommended by the print server manufacturer Refer to the lpr or UNIX printing section of the print server manual For example Xerox printers use a remote queue name of LP hp print server appliance a 76 amp Properties Prini Share Description optiona HP LaserJet a000 T Hide this print share in Aetea Meimhbotood or Aly Miofwonk Piores Prini a banner page with each prin job I Pause printing mor this print share Printer IF Address o
115. d the network connection for the print share being added Add Print Share Step 1 of 3 Page Field Names Description IP Address or Hostname DNS name or IP address of the network printer that will be servicing the print jobs in this queue for example hpprinter mycomputer com or 192 0 0 192 In order to use the DNS name a DNS server address must be configured on the PSA in the TCP IP and DNS Settings page The name must be alphanumeric and can contain hyphens and periods Printer Network Connection a HP Jetdirect internal card or single port external box Select this if the printer has an internal HP J etdirect print server card or is connected to an external single port HP Jetdirect print server a HP Jetdirect 3 port external box Some external HP print servers support more than one printer for example the HP Jetdirect 500X For these cases choose which port the printer is connected to a Other print server Select this option if the target print server is not an HP Jetdirect print server Many print servers will work with the default selections of Hewlett Packard J etdirect Print Server selected If however the print jobs do not appear on the printer select this option and complete Remote Queue Name with the remote queue name recommended by the print server manufacturer This field is case sensitive Refer to the lpr or UNIX printing section of the print server manual For example Xerox printers use a rem
116. d to the PSA successfully using the Administrators feature in the web interface under Security Deleted administrator account 410 Level Informational Category Administrative Description The administrator account was removed from the PSA successfully using the remove feature in Administrators in the web interface under Security Changed WINS server address 411 Level Informational Category Administrative Description The WINS server address has been successfully changed on the Microsoft Network Settings page in the web interface under Networking Changed Windows domain or workgroup name 412 Level Informational Category Administrative Description The Windows NT domain or workgroup name has been changed successfully on the Microsoft Network Settings page in the web interface under Networking Enabled NT domain authentication 413 Level Informational Category Administrative Description NT domain authentication has been enabled on the Microsoft Network Settings page in the web interface under Networking Disabled NT domain authentication 414 Level Informational Category Administrative Description NT domain authentication has been disabled on the Microsoft Network Settings page in the web interface under Networking Added account in NT domain 415 Level Informational Category Administrative Description A new computer account for the PSA was created on the NT domain using the Microsoft
117. d verify that you are logged in to this PC with the appropriate access privileges then try running the Add Driver Wizard again Driver could not be initialized This driver could not be initialized on the PSA so it has been disabled for automatic driver download for example point and print Clients will have to supply their own driver Try adding this driver again Add the version of this driver that supports this PC s operating system first Then add drivers for additional operating systems Driver could not be initialized This PC has no FILE port A file port is required to perform the necessary driver initialization Please re install the file port on this PC before adding more drivers to the PSA This driver could not be initialized on the PSA so it has been disabled for automatic driver download for example point and print Clients will have to supply their own driver There may be another instance of the HP Add Driver Wizard running on this PC Make sure there are no other instances of the Add Driver Wizard running then try running the Add Driver Wizard again The application performing the driver installation and initialization has experienced an error This error may be generated by a variety of problems from network communication issues to inf file corruption Verify the following e that the PSA network configuration information are correct and running for example WINS server or manually specified dom
118. ded by the PSA and the user will be prompted to provide the printer driver files Error Driver does not match OS inf_file_name is not the correct driver information file for selected_OS It only contains driver information for OS_supported_by_ inf The specified driver will NOT be installed To add a driver for selected_OS rerun this Add Driver wizard and specify the correct driver setup information file inf For more information on drivers consult the online manual Error Driver does not match OS inf_ filename is not the correct driver information file for Windows 9x Windows 95 98 or Me It only contains driver information for supported_ OS Please specify another driver setup information file inf Error Driver does not match OS inf_file_name is not the correct driver information file for selected_ OS It only contains driver information for Windows 9x Windows 95 98 or Me The specified driver will NOT be installed To add a driver for selected_OS rerun this Add Driver wizard and specify the correct driver setup information file inf For more information on drivers consult the online manual Initialization Complete Initializing driver_name Initializing driver for this version of firmware Initializing Printer Driver Install a Windows NT 2000 or XP Driver First You must install a printer_name driver for Windows XP Windows 2000 or Windows NT 4 0 before you install a driver for Windows 9x Wi
119. dministrator name and password The default is admin for the user name and admin for the password The Overview page is displayed with the menu on the left The Overview page displays general information about the PSA Menu The menu is always displayed on the left side of the displayed page in the web interface Click on any of the following topics listed on the menu for more information Print Services Overview gt Print Shares Driver Management Networking Date and Time TCP IP and DNS Microsoft Network LPD Settings SNMP c a e E Security Administrators SSL Certificate Maintenance p Backup e Restore Upgrade Restart Diagnostics System Summary Diagnostic Report gt Event Log Overview Page The following information is displayed on the Overview page Overview Page Field Name Description Print Server Name Name as typed in the Print Server Appliance Name field on the Microsoft Network Settings page in the web interface under Networking Appliance Status Status of this PSA If a backup restore or upgrade is in process shows the current state of that operation System Load Shows how heavily the PSA has been used in the past 15 minutes See the System Load section on the Diagnostic Report for more information Percentage of disk space used on the PSA Lists the number of configured DNS servers that are reachable acros
120. driver was not installed onto the PSA One of the following conditions exist e The user trying to install the printer driver has insufficient rights on the PSA or on the PC In order to install drivers onto the PSA a user must be logged onto the PC with a user account that has permission to install software on that PC and have a corresponding administrator account on the PSA If NT domain authentication is enabled in the web interface under Networking gt Microsoft Network Settings page administrator accounts on the PSA can be set up on the Domain Account page in the web interface under Security gt Administrators If NT domain authentication is not enabled the user must set up a local administrator account on the PSA with a user name and password that matches the NT user account e There is acommunication error with the PSA e There is a problem with the printer driver Reasons might be o the INF file is an inappropriate format the INF file cannot be found the process was canceled by the user insufficient memory on the PC the driver failed to queue correctly the path to the inf file exceeds the 128 character maximum the inf file is for an operating system that is incompatible with the operating system that the user selected o there is another instance of the HP Add Driver Wizard running on this PC O 0 0 0 0 0 Action e In the case of a communication error try again when there is less traffic on the network
121. ducts referenced herein are trademarks or registered trademarks of American Power Conversion Corporation UNIX is a registered trademark of The Open Group JetDirect is a registered trademark of Hewlett Packard Company HP UX Release 10 20 and later and HP UX Release 11 00 and later in both 32 and 64 bit configurations on all HP 9000 computers are Open Group UNIX 95 branded products Solaris is a product of Sun Microsystems Other product names are U S trademarks or registered trademarks of their respective owners HP Limited Warranty Limitation of Liability HP warrants to you that HP software will not fail to execute its programming instructions after the date of purchase for a period of NINETY 90 DAYS due to defects in material and workmanship when properly installed and used If HP receives notice of such defects during the NINETY 90 day period HP will replace software that does not execute its programming instructions due to such defects HP does not warrant that the operation of the Software will be uninterrupted or error free TO THE EXTENT ALLOWED BY LOCAL LAW THE ABOVE WARRANTIES ARE EXCLUSIVE AND NO OTHER WARRANTY OR CONDITION WHETHER WRITTEN OR ORAL IS EXPRESSED OR IMPLIED AND HP SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE Some countries states or provinces do not allow limitations on the duration of an implied warranty so
122. dy exists with the name name In order for drivers to be deployed to client machines using point and print the drivers must be properly initialized If a driver has failed to initialize it will be disabled by the PSA and cannot be enabled but it can be re installed A disabled driver may still be associated with a printer but when a client tries to install that printer the driver files will not be provided by the PSA and the user will be prompted to provide the printer driver files In order to install printer drivers onto the PSA they must be initialized In order to run driver initialization a user must e be logged onto their PC with a user account that has permission to install programs and administer printing on that PC and e have a corresponding administrator account on the PSA Verify that the user account being used has these permissions Then empty your browser s cache close down all instances of your browser and then restart your browser In order to install printer drivers onto the PSA they must be initialized In order to run driver initialization a user must e be logged onto their PC with a user account that has permission to install programs and administer printing on that PC and e have a corresponding administrator account on the PSA Verify that the user account being used has these permissions Then empty your browser s cache close down all instances of your browser and then restart your browser
123. e Left When there is a choice of options as indicated in the front panel display press this button to toggle backward through the choices Right When there is a choice of options as indicated in the front panel display press this button to toggle forward through the choices Numeric Keypad The numeric keypad has buttons for the numbers 0 9 Above the keys are letters of the alphabet like the keypad ona telephone Use the numeric keypad to enter numeric values such as IP address subnet mask and so forth when configuring the PSA The letters above the keys can be useful as a mnemonic aid when entering the device s password Making Entries Ke a gt Use and on the front panel to move the cursor in the front panel display Enter only numbers from the keypad When the entry is complete press il Messages on the Front Panel When the PSA is powered up it executes a series of self tests It then displays a series of messages including Booting Configuring Validating Extracting Formatting etc When the startup process is complete the PSA displays a repeating series of normal operating messages HPHC 60CAF 09 12AM The first line of the display shows the PSA name which can be entered from the web interface during configuration on the Microsoft Network Settings page If the name is not typed in the web interface the default name based on the device s MAC address is displayed
124. e 2003 Time Type the time in the format hh mm ss The seconds and leading zeroes may be omitted for example 5 35 and 12 00 00 AM PM Use the drop down box to select AM or PM The 24 hour time format is not supported Time Zone Select the appropriate time zone from the drop down box Click to keep the time and date at their previous values or click apply to set the date and time Links to related pages System Messages for Date and Time Getting Started Links within this document What Ships in the Box Steps for Installation and Configuration Hardware Installation Links to related documents Troubleshooting the Appliance What Ships in the Box The following items ship with PSA If something is missing from the box please contact the HP Dealer or Reseller where the PSA was purchased SS ge Quick ee sics Start ai Print Appliance amm err Feer o _ E 5064 Rackmount gt i Oo 4419 Kit Power Cable i Documentation cp Figure 1 Contents of the box Steps for Installation and Configuration To install the PSA complete these steps 1 Unpack the PSA and make sure the six items are included in the box Attach its rubber feet for desktop rack shelf or under printer installation For rackmount installation click here Connect the cables and components Configure the IP settings using the front panel for the first time The IP address can be changed through the
125. e Add Printer Driver wizard is displayed Adding New Drivers to the PSA or Using the Add Driver Wizard Links within this page Adding a New Printer Driver Links to related pages System Messages for Driver Management Printer drivers are factory installed or they might already be loaded from a previously added printer While these will cover many needs other drivers may be required This section discusses the procedure for adding drivers to the PSA Note After the PSA has been configured and drivers have been associated with printers the configuration should be backed up Adding a New Printer Driver ri a dd To add a driver to the PSA click tz z A on the Driver Management page The New Printer Driver Step 1 of 3 page is displayed This page can also be accessed by clicking new driver I the Add Print Share Step 3 of 3 page Note Before drivers can be initialized Java Scripting must be enabled in Internet Explorer under Internet Options gt Security tab gt Custom Level button gt Scripting gt Scripting of Java Applets subheading If a Java virtual machine is not installed in the browser refer to Sun Microsystem s web site or to Microsoft s web site for information about downloading one e New Printer Driver Step 1 of 3 New Printer Driver Step 1 of 3 Field Name Description Driver setup information file Type the path for the printer driver or click the Browse button
126. e Each client workstation is connected to the network e The printers are set up and turned on For Windows 9x ME NT and 2K On the client workstation click Tools in Microsoft s Explorer and select Find Computer Type the name 1 or IP address of the PSA Or find the PSA in the Network Neighborhood 2 Open the Printers folder 3 Right click on the printer to install 4 Select Install from the drop down menu 5 For Windows NT 2000 and XP clients driver installation is complete For Windows 95 98 and ME clients a wizard will ask several things for example Do you want to print from DOS and so forth Or On the client workstation click Start gt Settings gt Printers Double click the Add Printer icon Select the Network print server radio button Select the PSA and printer from the list box Or type the Universal Naming Convention UNC path for example spoolerl1 printer1 See Microsoft documentation for more information about UNC Click OK Answer subsequent questions to complete the driver installation E AN gi For Windows XP 1 On the client workstation click Start and then choose My Computer Under Other Places click My Network Places Now click Search on the toolbar and type the name or IP address of the PSA Double click the PSA that was found This will expand into a list of printers available on the PSA Right click on the printer and click Connect to install The printer should now be in
127. e Name Printer Address Printer Connection Status Printer SNMP Status Description Share name for the printer The printer address will be in the format lt address gt lt queuename gt where address is either the hostname or IP address depending on what form the administrator entered when creating the share Valid statuses are Connected Printer cannot be contacted The printer cannot be found It does not respond to a network query or ping LPD not supported The printer does not support LPD Valid statuses are Door open Low paper Low toner No paper No toner Offline Online Printer jammed Service required Unknown state The printer might not support SNMP or the network is busy and a response to the SNMP query was not received in the time out period Note Printer information is only returned from printers that support the standard printer MIB RFC1759 Printers that do not support the standard printer MIB or who have a real community name other than Public will display Status unknown Network Statistics The values in this section are updated every time the Diagnostic Report is displayed To refresh only this section select Diagnostic Report on the menu under Maintenance rather than pressing the Refresh button New network statistics will be displayed without waiting for the network requests to all of the DNS servers WINS servers domain controllers and printers Parameter Description
128. e a trap to be sent to each registered host when set to an integer value For example if an SNMP set is done on 1 3 6 1 4 1 11 2 46 2 1 10 4 0 with a value of 15 each registered host will receive the trap TrapTest 1 3 6 1 4 1 11 2 46 2 2 0 100 Trap Format The PSA can generate three different traps coldStart STATUS current DESCRIPTION A coldStart trap signifies that the SNMPv2 entity acting in an agent role is reinitializing itself and that its configuration may have been altered snmpTraps 1 trapTest OBJECTS snmpTrapTest STATUS current DESCRIPTION When a set is done on trapTest this notification will be sent out psaEventV2 100 logEventCriticalAlert OBJECTS logCriticalCategory logCriticallD logCriticalMessageNumeric logCriticalMessageString STATUS current DESCRIPTION When a new critical entry is added to the logTable a notification of this type will be sent to all entities registered for this notification psaEventV2 1 This trap corresponds to critical entries in the Event Log Six different events have been defined as critical Cannot communicate with any domain controllers Domain name Cannot communicate with any WINS servers Cannot communicate with any DNS servers Cannot connect to printer connection refused by printer Cannot print due to problem at the printer Critically high disk utilization disk utilization is at 90 100 of capacity If this log is added to the e
129. e queue name on the target printer TEXT must be specified or TEXT2 TEXT3 for multi port J etdirect print servers This must be done even though the target printer is an HP J etdirect device Use the normal print queue when printing jobs that have been formatted with a printer specific page description language such as PDL like PostScript or PCL Configuring Print Queues for BSD like Systems If the printer supports automatic language switching the application may select the printer language using commands embedded in the print data Make sure users know the printer names for the printers since they will have to enter those names on the command line for printing Following is an example of configuring print queues for BSD like systems for example Linux Edit the etc printcap file to include the following entries printer_name lp rm print_appliance_name rp remote_printername_argument this should be the same as the printer name on the appliance lf var spool lpd error_log_filename sd var spool lpd printername sh where printer_name is the name of the printer on the local computer print_appliance_name identifies the printer on the network and remote_printername_argument is the print queue designation on the appliance For more information on printcap see the printcap man page in the UNIX documentation Create the spooling directory by making the following entries As the root
130. ecryption is a necessary part of the operation of the Software Transfer Your license will automatically terminate upon any transfer of the Software Upon transfer you must deliver the Software including any copies and related documentation to the transferee The transferee must accept these License Terms as a condition to the transfer Termination HP may terminate your license upon notice for failure to comply with any of these License Terms Upon termination you must immediately destroy the Software together with all copies adaptations and merged portions in any form Export Requirements You may not export or re export the Software or any copy or adaptation in violation of any applicable laws or regulations U S Government Restricted Rights The Software and any accompanying documentation have been developed entirely at private expense They are delivered and licensed as commercial computer software as defined in DFARS 252 227 7013 Oct 1988 DFARS 252 211 7015 May 1991 or DFARS 252 227 7014 Jun 1995 asa commercial item as defined in FAR 2 101 a or as Restricted computer software as defined in FAR 52 227 19 Jun 1987 or any equivalent agency regulation or contract clause whichever is applicable You have only those rights provided for such Software and any accompanying documentation by the applicable FAR or DFARS clause or the HP standard software agreement for the product involved Software Copyright Notices Copyrigh
131. ecurity page is displayed when Security is selected for a specific print share on the Print Share List page The Print Share Security page shows print share security information if NT Domain security is enabled an NT domain is specified on the Microsoft Network Settings page Note Microsoft Windows 2000 and XP permissions that do not map directly to the four access levels of Windows NT Print Manage Full Control and No Access appear as Special Access Print Share Security Page Field Name Description Type account name Type the account name in the format Domain Accountname Select accounts from This drop down list contains names of the primary domain and all trusted domains Select one from which to select accounts Domain Members Shows all of the NT groups on the domain specified in the above field To show users also click g EE Highlight the group or user and click The user or group will be add added to the list shown under Current Account s in List with the level of access indicated in parentheses To highlight multiple groups users use the Control or Shift key Note If the domain has its anonymous enumeration of SAM accounts security policy set to disabled the web interface will ask for a user name and password so it can retrieve the group or user list The name and password is not saved on the PSA so subsequent requests for browse lists will ask for the name and password again Select Access T
132. ed 3 Click ok The selected print share and all of its print jobs will be deleted Print Share List as Alie Acti Adding a Print Share to the PSA While there is no fixed limit on the number of print shares that can be attached to the PSA many factors impact performance in your environment and create an effective limit for your environment and use model Factors that impact performance include the number of users printing through the PSA how frequently the users print whether NT Domain security is enabled the size of the jobs being printed the types of jobs being printed for example color print jobs the speed of your printer s and how many print shares are installed on the PSA Both UNIX and Windows clients can simultaneously print to the same print share UNIX clients ignore any Windows driver selections The following postscript printer drivers for Windows 9x and NT are factory installed These drivers and any others that have been added to the PSA can be associated with a print share on the PSA The HP Laser et 4 has both the postscript and PCL drivers installed the default is the PCL driver Note When upgrading to 2 5 x drivers that were installed prior to the upgrade will be available HP Business I nkjet Printers HP Business Inkjet 2280 series printers HP Business Inkjet 3000 series printers HP Color Laser et Printers HP Color Laser et 2500 series printers HP Color Laser et 5500 series printers
133. ed Please wait while your printer drivers are installed Preparing to install drivers Replace the existing driver The inf file specified might be corrupted or it might not be a driver setup information file Verify that the specified inf file is a printer setup information file and retry If the problem persists try a different copy of the desired driver or consider using a different driver The inf file specified conflicts with the user specified operating system for that file Verify that the correct operating system was specified with the inf file you are typing The file specified does not have a inf file name suffix and is not viewed as a driver setup information file Verify that the specified file is a driver setup information file with the appropriate inf file name extension and retry The inf file name is blank Complete the file name Skip the installation and keep the driver version that is already installed in the PSA Loading the Add Driver Wizard A warning message that informs the user that there is already a version of the driver installed on the PSA Asks if he she would like to replace that driver or keep the existing installed version The user may choose to install drivers for additional operating systems Informational Informational Informational Informational Informational Replace the driver that is already installed on the PSA with the new inf selected Resour
134. eedback from the PSA For example if the printer on the PSA has been paused the client printer will not reflect this and it may look like a job was printed when it was not To install a local printer with local driver that prints through the PSA follow the following steps For Windows 2000 and XP Clients m Start the Add Printer wizard in Windows 2000 or XP 2 Click Next 3 On the Local or Network Printer screen select Local printer and then click Next Note On this screen make sure Automatically detect and install any Plug and Play printer is not selected 4 On the Select the Printer Port screen select Create a new port and then select Local Port as the Type Click Next 5 On the Port Name screen type the UNC name for the printer in the following format and click OK lt psa_name gt lt printer_name gt where psa_name is the name of the PSA and printer_name is the name of the printer On the screen showing printer manufacturers and printers select a printer driver and then click Next On the Name Your Printer screen specify a printer name and then click Next On the Printer Sharing screen select Do not share this printer and then click Next On the Print Test Page screen click Next Click Finish SOOND For Windows NT Clients Note Before you begin make sure you have Microsoft s Service Pack 6a or greater installed on the client s Start the Add Printer wizard in Windows NT Select My Compute
135. een designed to provide a quick and easy way to add print capacity without affecting the general purpose server It has several distinct advantages over conventional network printing configurations which can result in improved performance in both printing and file access These advantages are discussed below Microsoft NT domain security also known as Microsoft NT Authentication and Authority is a feature that allows administrators to easily authorize or restrict print administration and services to specific groups or users by using their existing user name and password of the NT 4 0 domain An NT domain is a logical grouping of network servers and other computers that share a common security and user account for each user Users log on to the domain not to individual servers in the domain Installing printers on each client computer is required in order for clients to be able to print using the PSA With the Microsoft Point and Print technology printers are added to the PSA and associated with a factory installed driver or a driver already associated with a printer Clients can be easily set up with access to that printer and its driver without having to install the driver again In a typical network general purpose servers manage both the printing tasks and the file application serving The PSA handles the spooling and network traffic associated with printing reducing the workload on the general purpose server When printing takes place
136. ement does not grant permission to use PSF trademarks or trade name in a trademark sense to endorse or promote products or services of Licensee or any third party 8 By copying installing or otherwise using Python 2 2 Licensee agrees to be bound by the terms and conditions of this License Agreement Copyright c 1983 Regents of the University of California All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 All advertising materials mentioning features or use of this software must display the following acknowledgement This product includes software developed by the University of California Berkeley and its contributors 4 Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A P
137. ept a null or blank password Confirm Password Type the password again to confirm it if there is a password Then click to add this administrator to the PSA In addition to the default local administrator account other administrator accounts can be to the PSA To add an administrator account follow these steps 1 2 3 4 5 Log on to the web interface On the menu under Security click Administrators The Administrators page is displayed Click under the list of local administrators The New Local Administrator page is displayed Complete the fields as described below Click i ok The message Administrator Account Added is displayed hp print server appliance Mew Local Administrator Administrator Marnie Patawond Contin Fassaad Hots The soiniahador names and passwords Ord Co sara Deleting a Local Administrator Account Administrator accounts can be deleted from the PSA but there always must be at least one administrator account remaining on the PSA Follow these steps to delete an administrator account Log on to the web interface On the menu under Security click Administrators The Administrators page is displayed Highlight the local administrator account to delete Pee Click to delete the administrator account If this is the only administrator account it cannot be deleted Changing the Password for an Existing Local Administrator Account The password for an existing
138. er Management page Drivers can also be initialized or deleted on this page Note Client side rendering CSR drivers and Windows 2000 drivers can be initialized enabled and disabled separately However these drivers are installed and deleted at the same time Note Drivers for Microsoft Windows NT 4 0 usually work with both Windows 2000 and Windows XP Consequently many vendors will label a driver as Windows 2000 or XP when the driver conforms to the NT 4 0 driver specification As a result any of the following can occur e Windows 2000 drivers can show up as Windows NT or Windows 2000 drivers e Windows NT drivers show up as Windows NT drivers e Windows XP drivers show up as Windows NT or Windows 2000 drivers Note Having Windows 2000 XP versions and NT versions of drivers with the same names installed on a PSA can result in the loss of printer settings and functionality e g inability to print in landscape mode or loss of watermarks To eliminate this risk of lost printer functionality HP recommends two workarounds Install and distribute only NT printer drivers on the PSA for all of the NT 2K and XP clients or If print shares for both driver versions are required create a separate share for each driver type on separate PSAs This only affects NT and 2K XP printer drivers and not 9X drivers 9X drivers can still be installed along with NT or 2000 XP drivers Nr For more information please refer to the white papers on c
139. er will get stuck on the PSA You may need to upgrade the firmware of the offending print server or it may need to be replaced with a print server that supports LPD HP Laser et print jobs are missing text of graphics or are printing garbage It is strongly recommend that the OSA s firmware be upgraded to latest 2 4 x or newer to alleviate problems with printer drivers Click here to download the latest firmware for the PSA Remove the printer driver from the PSA and from any computer printing to that printer Download the latest printer driver form the HP Web site and install it on the PSA The Xerox Document Center 265ST fails to print from the PSA Print jobs hang in the queue These Xerox printers use their own print server cards that require the remote name to be Ip in lower case only only In Printer Properties Other print server must be selected The Remote Queue Name must be Ip lower case Printer Drivers 1 can t install the Windows 9x driver for a printer for which I already have a Windows NT 2K or XP driver installed Your Windows 9x driver may not have the same name in its inf file as the Windows NT 2K or XP drivers Please contact HP support I am using Internet Explorer 6 and am trying to install and initialize a driver keep getting a message about J ava having to be turned on How do I do this Before drivers can be installed Java must be installed and JavaScript enabled in your web browser
140. erke Ace A piriti Syed Prine Deere HP Business intj 2290 PS ea HP Buia ine 2290 PS NT BP Dispel inkjet JO PS ad HP Business inipet 2000 PS MT HP CL azi Pb ey HP CLJ 9290 PSNT HP Color Lace Ai 2500 PS in Vad iais Bb Goter Locker dat 2800 0S MTh HP Color Laer det 400 PS Gr Wo miair HP Cais Lace fat 400 FS HT 7 bip L Only show desery capable of ibeni mide rendering Note t Drei pens meth hivi Sano ipa Nor ates rue dhai irii a Pode ang Prong A AT d0 dTa ely mark ee PE ga A ere Ley Oe oe a5 DO oe AP eee ee ee on Sot AT d g Pe i i T A A o ne My piir ii Pedia EE ag NT AO ea BRAI Wiring SOOO nn a NT napona OF rra mth a THETH DETAI ed r a PE en eet oo one doe oo priri sees HE Sere Gey ee Ped SOR pare oer h AT erect oo ae reer ee nof Gem print pinap for Sih Grae verion ae Fi OMG de E Se Ae Dee Ce eC Peas 1 To access the Driver Management page select Driver Management in the web interface under Print Services 2 Select the operating system for the driver s to be viewed or deleted or select All Operating Systems The corresponding drivers are displayed in the Printer Drivers list box 3 If desired highlight the printer driver to delete enable initialize or disable and click the corresponding button Note The HP Laser et 4 printer driver can never be deleted 4 Then click the appropriate button on the right If adding a driver a security warning is displayed Click Yes to continue and then th
141. ermission 5 Redistributions of any form whatsoever must retain the following acknowledgment This product includes software developed by the Apache Group for use in the Apache HTTP server project http www apache org THIS SOFTWARE IS PROVIDED BY THE APACHE GROUP AS IS AND ANY EXPRESSED OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FORA PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE APACHE GROUP OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE This software consists of voluntary contributions made by many individuals on behalf of the Apache Group and was originally based on public domain software written at the National Center for Supercomputing Applications University of Illinois Urbana Champaign For more information on the Apache Group and the Apache HTTP server project please see lt http www apache org gt GNU GENERAL PUBLIC LICENSE Version 2 June 1991 Copyright c 1989 1991 Free Software Foundation Inc 59 Temple Place Su
142. ertificate page To change the encryption strength or to encrypt web communication follow these steps 1 At a workstation access the web browser and type the IP address for the PSA 2 Log on to the PSA as an administrator The default user name is admin and the default password is admin 3 Under Security on the menu select SSL Certificate See the description of the fields above for more information 4 Click on the Encryption strength drop down list and select the cipher value for the certificate Low default Medium or High 5 To redirect all communication through a secure port HTTPS check Encrypt all web communication 6 Click KAk Viewing the SSL Certificate The View Certificate page is displayed after is clicked on the SSL Certificate page View Certificate Page Field Names Description Common Name Fully qualified domain name or IP Address of the PSA Used to identify the device HPX595 rose hp com Organization Full legal name of your company Organizational Unit Validity Period Length of time in days for validity of the certificate Cipher Value Cipher value of the certificate low medium or high Locality City City in which your organization is physically located State Province Specific department or division within your organization State or province up to 68 characters Country Region Two character ISO country code
143. es without prior written permission of the OpenSSL Project 6 Redistributions of any form whatsoever must retain the following acknowledgment This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit http www openssl org THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT AS IS AND ANY EXPRESSED OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE This product includes cryptographic software written by Eric Young eay cryptsoft com This product includes software written by Tim Hudson tjh cryptsoft com This software is copyright 1988 1997 Julianne F Haugh All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice
144. factory installed drivers will be restored All other settings including network configuration administrator settings printers and user added drivers will be lost 1 Make sure queues are empty and no printing activity is taking place 2 Press the Power button on the front panel of the PSA to turn it off CAUTION To prevent possible file corruption on the PSA do not simply disconnect the power cord 3 Turn on the PSA again by pressing the Power button 4 During the restart sequence when the front panel display reads Configuring press F the following message is displayed Reset defaults W ayes X ano 5 Press a to reset the PSA to its factory defaults Press x to cancel the restart process and retain all current configuration information The PSA will then finish restarting If v was pressed and the factory default settings are being restored the following message will be displayed during restart Resetting factory System Messages for Restarting the PSA Restarting or Rebooting the PSA Use the Restart feature to reboot the PSA Before restarting the PSA read the following e The restart process will take from three to six minutes During this time the PSA is not available for use and the connection to this browser session may be lost e Any print jobs actively being spooled from client users to the PSA will probably be lost and must be reprinted e Any print jobs currently spooled on the PSA wil
145. fication of the work for the customer s own use and reverse engineering for debugging such modifications You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License You must supply a copy of this License If the work during execution displays copyright notices you must include the copyright notice for the Library among them as well as a reference directing the user to the copy of this License Also you must do one of these things a Accompany the work with the complete corresponding machine readable source code for the Library including whatever changes were used in the work which must be distributed under Sections 1 and 2 above and if the work is an executable linked with the Library with the complete machine readable work that uses the Library as object code and or source code so that the user can modify the Library and then relink to produce a modified executable containing the modified Library It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions b Accompany the work with a written offer valid for at least three years to give the same user the materials specified in Subsection 6a above for a charge no more than the cost of performing this distribution c If distribution of the work is made by offering acces
146. figuration areas of the PSA such as the queue configuration screen If the network does not have a DNS leave this field blank or empty The DNS domain name For example a server named mail hp com hp com is the DNS name and mail is the host name The domain name must match standard naming conventions The name must be alphanumeric It may also contain dashes for example mycompany com If the network does not have a DNS domain name defaultdomain is entered as the default The Overview page can display new information regarding the PSA if this box is checked Configuring the PSA Using the Web Interface 1 At a workstation access the web browser 2 Log on to the PSA as an administrator The default is admin for the user name and admin for the password 3 Complete the TCP IP and DNS Settings page See the description of the fields above for more information 4 Click K After this screen has been completed complete the Microsoft Networking Settings page to identify the WINS server address and the Windows NT domain or workgroup For the Windows NT domain security feature complete the other fields on that page Microsoft Network Settings Links within this page Microsoft Network Settings Page Microsoft Domain Authentication Features Adding the PSA to a Domain Enabling and Disabling Microsoft Domain Authentication Granting Printer Access or Authority to Users and Groups
147. filtered out Timestamps The date and time of the event Level Type Indicates the urgency of the message One or more of the following levels of messages determnined by the filter s selected on the Event Log Filters page can be displayed e CRIT Critical error an error that affects the basic funtions of multiple users and or administrators For example users cannot print or administrators cannot perform administrative functions Typically caused by a complete failure of a network component e ERR Error an error that affects the functions of only one or more users or administrators but not all The majority of users or administrators can still perform their functions e INFO Informational an important system event For example a new driver has been added Events that occur more often such as completing a print job are not included Groupings of Event Log messages One or more of the following types of messages determnined by the filter s selected on the Event Log Filters page can be displayed e SEC Security displays all Security related messages e NET Networking displays all Networking related messages e ADM Administrative displays all Administrative related messages Log number for the event Click on the message ID number to get more information about that message Message Text message that describes the event Event Log Filters Event Log filters are used to sort messages au
148. for a domain controller or if the PSA cannot access any DNS servers IP Address IP Address of the Domain Controller Role Determined by the NetBIOS name from the WINS server Valid statuses are e Primary Primary Domain Controller e Backup Backup Domain Controller e Unknown Either the Domain Controller cannot be contacted or it is an Active Directory Domain Controller which means it is a peer and there are no primary or backup domain controllers Connection Status Valid statuses are e Connected e Not configured The PSA is in workgroup mode e Cannot be contacted The domain controller cannot be found It does not respond to a network query or ping e No DNS entry for the Domain Controller The IP address for the domain controller on the DNS server is either not valid or not for the domain controller e No WINS entry for the domain The WINS server automatically adds an entry for the PSA onto the domain controller If there is no entry for the PSA on the domain controller the WINS server is not functioning properly e Domain Controller not in the current domain The domain controller is a valid domain controller However it is not associated with the same domain to which the PSA is currently joined e There is no machine account for this PSA on the Domain Controller The machine account is not joined to the domain Printer Status The values in this section are updated each time status is gathered Parameter Shar
149. ge in Network Neighborhood does not work properly An error message appears whenever a change is accepted A printer had to be taken off the network for repair and it was replaced by one having a different IP address Print jobs reach the queue but never print The PSA is set up to use DHCP When powered it off and then powered it back up again DHCP reassigned it to a different IP address than it had previously Now the clients can no longer print How can avoid this changed the printer name and now the clients cannot print e The IP address or printer name may not be correctly configured for the desired printer Verify that the PSA can print to the printer by using the print test page functionality of the printer property page in the web interface of the PSA If the test page does not print there is a problem in the communication between the PSA and the printer See more information about the TCP IP and DNS Settings page or the Microsoft Network Settings page e The PSA may be unable to communicate with a domain controller in order to verify the clients ID and password Check the Domain Membership Status field on the Microsoft Network Settings page to verify that the PSA can communicate with the domain controller e If NT Domain Security is enabled the security settings may have changed Verify that the user has authority to print This can be done from the PSA s web interface by selecting Print Shares
150. ghborhood are supported by the PSA 4 Can I use a hyphen in the PSA name 5 Can the PSA integrate into a Windows 2000 environment 6 Can the PSA be configured via TELNET 7 Is the PSA compatible with non HP print servers 8 The PSA does not show up in Network Neighborhood Printing 1 Is there a maximum size print job can send to the PSA 2 How does the PSA work with my existing print spooling strategy 3 What is the Microsoft Point and Print feature and how does it work 10 11 12 13 Can the PSA accept print jobs from UNI X clients Can I print over my network using Novell as the network OS What is the limit on the number of jobs that can be spooled How are print jobs sent to the PSA How are print jobs sent from the PSA to the printer I am trying to print in Landscape mode Duplex mode or multiple copies but the margins are offset Why is the performance so slow when connecting to the PSA via Network Neighborhood or when opening a printer s Property Page in Network Neighborhood Jobs are getting stuck on the PSA for one of my printers HP Laser et print jobs are missing text of graphics or are printing garbage The Xerox Document Center 265ST fails to print from the PSA Print jobs hang in the queue Printer Driver 1 I can t install a Windows 9x driver for a printer for which I already have a Windows NT 2K or XP driver installed am using Internet Explorer 6 and am try
151. group Microsoft R domain or workgroup to which this PSA belongs Primary WINS Server Address IP address of the primary WINS server Secondary WINS Server Address IP address of the secondary WINS server Domain Authentication Status of domain authentication checked is enabled or on Domain Controller Auto Discovery Status of auto discovery checked is enabled or on Specified Domain Controllers List of domain controllers SNMP Configuration I nformation Parameter Description SNMPv1 v2 Enables and disables SNMPv1 v2 SNMPv1 v2 Read and Write access SNMPv1 v2 Read only access SNMPv3 SNMPv3 User Name SNMPv3 Authentication Key SNMPv3 Privacy Key SNMP Traps Information Parameter IP Address Community Name Port Administrators Parameter Local Administrators DomainAdministrators SSL Configuration I nformation Allows SNMPv1 v2 read and write access Allows SNMPv1 v2 read only access Enables and disables SNMPv3 access SNMPv3 account name Authentication Key for SNMPv3 account Privacy Key for SNMPv3 account Description IP address of the trap recipient Community Name that will be used in the traps packet not the PSA s SNMP community name Number of the port where the trap will be sent typically 162 Description Names of the local administrators Names of the domain administrators Parameter Installed Certificate New Certificate Status Common Name Organiza
152. gt Copyright c 1993 1994 1995 1996 Rick Sladkey lt jrs world std com gt Copyright c 1999 2000 Wichert Akkerman lt wakkerma debian org gt All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE AUTHOR AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FORA PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE
153. gt Security By default the group Everyone has permission to print If Everyone does not have permission to print add it e If NT Domain Security is enabled verify that the group Everyone exists in the domain The user you are logged in as may not have the appropriate permissions to perform the operation For NT Domain security verify that the user you are logged in as is a member of the Domain Administrators group If you are not using NT Domain security verify that there is an administrator account on the PSA with the same name and password as the user that you are logged in as Open a web browser point it at the PSA and select the Print Shares page Select the Properties page for that printer Change the IP address or DNS host name for the printer and click apply If the printer was stopped in the middle of a print job that job will be lost but any other jobs in the queue will now print to the new printer Use a WINS server along with DHCP so that when the PSA powers up it will always be reassigned the same IP address If you are not using WINS you may alternatively set the PSA IP address manually and have the DHCP administrator select an IP Address Pool range which excludes the PSA address Or have the DHCP administrator supply the PSA with an infinite lease duration for its assigned IP address Use the Windows Add Printer wizard at the clients and enter or browse to the new printer name Also delete the c
154. h the distribution 3 The end user documentation included with the redistribution if any must include the following acknowledgment This product includes software developed by Gregory Trubetskoy Alternately this acknowledgment may appear in the software itself if and wherever such third party acknowledgments normally appear 4 The names mod_python modpython or Gregory Trubetskoy must not be used to endorse or promote products derived from this software without prior written permission For written permission please contact grisha modpython org 5 Products derived from this software may not be called mod_python or modpython nor may mod_python or modpython appear in their names without prior written permission of Gregory Trubetskoy THIS SOFTWARE IS PROVIDED BY GREGORY TRUBETSKOY AS IS AND ANY EXPRESSED OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL GREGORY TRUBETSKOY OR HIS CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF
155. hat the operation of HP products will be uninterrupted or error free If HP is unable within a reasonable time to repair or replace any product to a condition as warranted you will be entitled to a refund of the purchase price upon prompt return of the product HP products may contain remanufactured parts equivalent to new in performance or may have been subject to incidental use Warranty does not apply to defects resulting from a improper or inadequate maintenance or calibration b software interfacing parts or supplies not supplied by HP c unauthorized modification or misuse d operation outside of the published environmental specifications for the product or e improper site preparation or maintenance 8 TO THE EXTENT ALLOWED BY LOCAL LAW THE ABOVE WARRANTIES ARE EXCLUSIVE AND NO OTHER WARRANTY OR CONDITION WHETHER WRITTEN OR ORAL IS EXPRESSED OR IMPLIED AND HP SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE Some countries states or provinces do not allow limitations on the duration of an implied warranty so the above limitation or exclusion might not apply to you This warranty gives you specific legal rights and you might also have other rights that vary from country to country state to state or province to province 9 HP will be liable for damage to tangible property per incident up to the greater of 300 000 or the actual amount
156. he eaaa EEH ama O Tesi Caze Nore None Space 1 Start the application KeyChange exe that is supplied on the CD shipped with the PSA 2 Create the Authentication Key a In New Passphrase type the password Use the engine ID you wish to communicate with on the SNMP Settings page in the web interface under Networking Do not include the beginning 0x which indicates the value is given in hexadecimal b Click Update New Key This value excluding Ox is the authentication key Copy this key omitting the OX and paste it into the Authentication Key field on the SNMP Settings page on the menu in the PSA s web interface under Networking 3 Create the Privacy Key a In New Passphrase type the password Use the engine ID you wish to communicate with on the SNMP Settings page in the web interface under Networking Do not include the beginning 0x which indicates the value is given in hexadecimal b Click Update New Key This value excluding Ox is the privacy key Copy this key omitting the 0X and paste it into the Privacy Key field on the SNMP Settings page on the menu in the PSA s web interface under Networking hp print server appliance SNMP Settings SMM anain Supptl E Beatle SH Enable SMMP WI Aad ore Wri acres C Enable GMMPwiie Atibon access F Enable SMMP 3 Lies Himik l Fat G Amemcason Er af 4a57B7afToel Tiocfa Homm uos Preecy rr 429664 DI cCSOBdEBEE 08e
157. he Jetdirect firmware card to the latest available version of firmware for the card Access the latest firmware at http www hp com Detected printer problem 305 Level Critical Error Category Administrative Description The PSA was able to communicate with the printer but the print job was not printed due to one of the following reasons e no paper e no toner e printer door open e paper jam e printer is off line e service required for the printer Action Fix the identified problem at the printer Changed IP address 400 Level Informational Category Administrative Description The IP address of the PSA has been changed successfully on the TCP IP and DNS page of the web interface or through the front panel of the PSA Note If the administrator s name cannot be determined and is displayed as None then it must have been changed using the front panel Added printer 401 Level Informational Category Administrative Description The printer has been added to the PSA successfully using the Add Printer feature either in Web Jetadmin on the PSA Print Share Management page or in the web interface Print Services gt Print Share List Deleted printer 402 Level Informational Category Administrative Description The printer was deleted successfully on the Printer Share List page in the web interface under Print Services Changed printer IP address 403 Level Informational Category Administrative De
158. he client is on a different subnet than the PSA Verify that WINS is configured correctly on the Microsoft Network Settings page An updated driver will be copied to the client if the driver has the same name and a newer version or date You can verify this by printing a test page from the client The test page will list all the files associated with the driver along with version information am trying to use the Properties page in Network Neighborhood to configure the PSA but the PSA seems to ignore some of my settings The PSA uses the printer configuration page on the Printer Properties window which is displayed after right clicking on a printer and then selecting Properties for driver configuration changes and recognizes some other settings such as security settings However the PSA does not recognize many of the settings if they are changed using these driver management tools e General tab o Comments text field supported o Location text field supported o Driver drop down list the driver can be changed if and only if the driver is an initialized driver otherwise the administrator will be prompted to change the driver through the PSA s web interface so that the driver can be initialized o New Driver button the driver can be uploaded to the PSA but will not be associated with this printer until the administrator uses the PSA s web interface to change the driver so that it can be initialized o Separator Page but
159. he recipients all the rights that we gave you You must make sure that they too receive or can get the source code If you link a program with the library you must provide complete object files to the recipients so that they can relink them with the library after making changes to the library and recompiling it And you must show them these terms so they know their rights Our method of protecting your rights has two steps 1 copyright the library and 2 offer you this license which gives you legal permission to copy distribute and or modify the library Also for each distributor s protection we want to make certain that everyone understands that there is no warranty for this free library If the library is modified by someone else and passed on we want its recipients to know that what they have is not the original version so that any problems introduced by others will not reflect on the original authors reputations Finally any free program is threatened constantly by software patents We wish to avoid the danger that companies distributing free software will individually obtain patent licenses thus in effect transforming the program into proprietary software To prevent this we have made it clear that any patent must be licensed for everyone s free use or not licensed at all Most GNU software including some libraries is covered by the ordinary GNU General Public License which was designed for utility programs This license the G
160. horized access attempts Cannot route print job to printer network path not found 303 Level Error Category Networking Description There is a problem with the network between the PSA and the printer Action One or more of the following actions may apply e Check to make sure the printer is plugged in is turned on and is online e Check the status of network components in the print path This includes whether components are in service and powered up e Check the configuration of network components in the print path This includes IP addresses and other settings components include the PSA the default gateway of the PSA the printer and network infrastructure routers switches cables and so forth Cannot connect to printer connection refused by the printer 304 Level Critical Error Category Networking Description The printer was able to communicate with the PSA but the printer refused to allow the PSA to connect to the LPD port port 515 HP networked printers only allow 8 simultaneous LPD connections and refuse connection number 9 HP printers with many separate sources for LPD print jobs may generate this error Action Verify that the IP address for the printer is for a printer not some other device in the web interface under Print Services gt Print Shares gt Properties Some older HP Jetdirect print server firmware the network interface card for HP Printers only allows one connection you should upgrade t
161. hose parameters if the PSA must be replaced or if its configuration values are accidentally changed or lost Use the Backup page to save the following configuration parameters administrator account user names and passwords network settings printer information printer drivers Use the following procedure to save the configuration parameters U ewo N a On the menu under Maintenance select Backup Click G save settings to begin the process A File Download window appears At the next screen click Save This File to Disk and then click i ok A Save As dialog box appears Choose a file name drive and directory to hold the saved configuration Click a save The saved configuration is in binary format and cannot be edited using a text editor Now that there is a backup file for the PSA settings can be restored if required see the next section Note If the PSA is joined to a domain the domain password for the domain controller is included in the backup file When that PSA backup file is restored it might be necessary to join the PSA to that domain again because the password might have changed since the backup file was created Restoring Network Settings and Printer Information Web Interface If configuration values have been accidentally changed or lost a previously saved copy of the configuration parameters can be restored to the PSA This technique can also be used to replace a PSA A copy of the configuration parameter
162. ies to connect to the print server appliance through Network Neighborhood it could take one to two minutes while the print server appliance tries to communicate with the DNS server Verify the DNS lookup tables using the following steps At the command prompt of a Windows NT or Windows 2000 computer type the following commands a The following command verifies an entry for the PSA name nslookup printappliancename domain DNS server IP address For example nslookup mypsa usa 192 168 100 90 If the name lookup does not reply with the PSA s IP address that means there is no entry for the PSA in the DNS server s Forward Lookup table The Forward Lookup table is the table the DNS server uses to determine the IP address based on the DNS name a The following command verifies an entry for the PSA s IP address nslookup printappliance I P Address DNS server IP address For example nslookup 192 168 100 80 192 168 100 90 If the IP address lookup does not reply with the print server appliance name it means there is no entry for the print server appliance in the DNS server s Reverse Lookup table The Reverse Lookup table is the table the print server appliance uses to find a system s name based on its IP address o Check the PSA s Microsoft Network Settings page under Networking in the PSA s web interface If the Specified NT Domain Controllers settings show the host name of the domain server use the IP address of the server instead If Manually
163. iles but we have achieved it as regards changes in the actual functions of the Library The hope is that this will lead to faster development of free libraries The precise terms and conditions for copying distribution and modification follow Pay close attention to the difference between a work based on the library and a work that uses the library The former contains code derived from the library while the latter only works together with the library Note that it is possible for a library to be covered by the ordinary General Public License rather than by this special one GNU LIBRARY GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING DISTRIBUTION AND MODIFICATION 0 This License Agreement applies to any software library which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Library General Public License also called this License Each licensee is addressed as you A library means a collection of software functions and or data prepared so as to be conveniently linked with application programs which use some of those functions and data to form executables The Library below refers to any such software library or work which has been distributed under these terms A work based on the Library means either the Library or any derivative work under copyright law that is to say a work containing the Library or a portion of it either verbatim
164. ing the security settings may have changed Verify that the user has authority to print This can be done from the web interface by selecting Print Shares gt Security By default the group Everyone has permission to print If Everyone does not have permission to print add either the specific user or a group to which the user belongs The group Everyone normally contains all the users e Monitor the log file for additional unauthorized access attempts Cannot communicate with WINS server 209 Level Error Category Networking Description The WINS server specified on the Microsoft Network Settings page in the web interface under Networking experienced one of the following conditions network problems cable malfunction hub or router problems not on the network the IP address or host name specified is not a domain controller power is disconnected or interrupted Action e Retype the WINS server address in the xxx xxx xxx xxx format on Microsoft Network Settings page and try again A properly configured WINS server is essential for the proper operation of the PSA If the PSA cannot reach the WINS server users on other subnets on the other side of a router will not be able to see the PSA in Network Neighborhood e Ifthe DNS server WINS server or Domain Controller is not on the same subnet as the PSA ensure that the TCP IP configurations as entered on the TCP IP and DNS page in the web interface under Networ
165. ing to install and initialize a driver keep getting a message about J ava having to be turned on How do I do this am going to upgrade to firmware version 2 3 xx Will the printer drivers have to be initialized again am trying to add a printer driver to the PSA but keep getting an unauthorized to perform this action error message added a Windows 2000 driver to the PSA but it shows up in the driver list as a Windows NT 4 0 driver added a Windows XP driver to the PSA but it shows up in the driver list as a Windows NT 4 0 driver I am having problems with Windows 2000 drivers What does it mean to Use client side rendering with this driver Power Outages 1 What happens if the PSA experiences an unplanned power interruption 2 How dol connect an uninterruptible power supply UPS 3 How does an uninterruptible power supply UPS work with the PSA PSA when the power fails Answers Configuration 1 Can I use Web J etadmin to manage my PSA Yes With Web J etAdmin 7 2 and above and the downloadable PSA plugins for WJA you can now configure and manage all of your PSAs that are running on the 2 4 X version of firmware Features include the ability to schedule backups and firmware upgrades after hours pushing printer drivers to multiple PSAs simultaneously and setting traps and alerts for different events 2 Does the PSA support bootp or rarp No but the PSA does support DHCP 3 Wha
166. is also used as a host name and the hyphen character is not allowed as the first character in a host name Windows Internet Name Server Enables network resources Such as PCs and printers to be specified by their friendly names instead of their IP addresses In order to use this functionality specify the primary WINS server by its IP address not by its friendly name Once the primary WINS server is specified use friendly names across other configuration areas of the PSA such as the queue configuration screen If the network does not have a WINS server configured leave this field and the next field blank Without a WINS server configured Windows 95 98 and ME clients may be unable to print to a PSA located on a different subnet Domain integration may behave unpredictably if this field is blank If the primary WINS server is unavailable this secondary server will be contacted Specify the secondary WINS server by its IP address not by its friendly name If the network does not have a WINS server configured leave this field blank or empty Specify the Windows domain or workgroup NT 2K or Windows Server 2003 to which this PSA belongs The PSA will appear under this name in Network Neighborhood Check this box to enable domain security for the PSA for NT 2K or Windows Server 2003 Uncheck the box to disable domain security The default is disabled Select this to automatically discover the domain controller for the do
167. istrator using Internet Explorer to access the PSA without prompting for an account name and password The PSA will request the browser to provide credentials given when the administrator logged into the Windows workstation The following scenarios could occur 1 When an administrator is using Internet Explorer and the URL specified for the PSA is within the browser s local intranet zone the browser will automatically send the credentials used to log into the Windows workstation o If the credentials are successfully authenticated with a domain controller and the administrators are also authorized to access the PSA s web interface then the requested page will be served to the browser Administrators are authorized if their domain account is listed in the PSA Domain Administrators list o If the credentials are not authenticated with a domain controller or the administrator s account is not authorized to access the PSA the PSA will prompt for another account name and password see Basic Authentication 2 If the PSA administrator is using Internet Explorer but the URL used to access the PSA is not within the local intranet then the administrator will be prompted for account name and password In this case the security prompt given to the administrator will have three fields and the information entered here will be encrypted before being passed to the PSA the screen shown is for Microsoft Windows NT 4 x this screen might vary depending on your
168. ite 330 Boston MA 02111 1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document but changing it is not allowed Preamble The licenses for most software are designed to take away your freedom to share and change it By contrast the GNU General Public License is intended to guarantee your freedom to share and change free software to make sure the software is free for all its users This General Public License applies to most of the Free Software Foundation s software and to any other program whose authors commit to using it Some other Free Software Foundation software is covered by the GNU Library General Public License instead You can apply it to your programs too When we speak of free software we are referring to freedom not price Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software and charge for this service if you wish that you receive source code or can get it if you want it that you can change the software or use pieces of it in new free programs and that you know you can do these things To protect your rights we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights These restrictions translate to certain responsibilities for you if you distribute copies of the software or if you modify it For example if you distribute copies of such a program whether gratis or
169. ized A4 document or poster to tabloid A3 or vice versa back to front prints the document in reverse order rotate 180 degrees rotates the document layout but not the paper If you are having problems with any of these features first update the firmware If the problem persists reinstall the driver and select the Use client side rendering with this driver checkbox when selecting the driver to use with the print share The problem should then be resolved hp print server appliance Add Print Share Step 3 of 3 See a drige feet hig prai ghar Ahen Windows Sheth Gees te mig shang Pep preg iar ior ait Spersing dye well be dunoeplically downiogded io Rai PC To add a driver wing a Sree information Ble aed Me Sick Hew diver Chien Prasa Deter AUS us Lie C Use cient side rendesing with hia diei Mote E NT A drivera usualy work mih 2000 aod XP s0 some manutacturens Mabe rivers as S000 or XP wien they ane ect NT dO ores Wian these orvers ara added fo Me appiansa ay appear inthe deae iat as NT dO devas ign Aie clicking Fiat ede Mir De GrorTinie iG doeeioed and fiat dhe Dever inimira ot miza Wo accept ihe Gonmtosd so he dirar can be propri inet RPT oa a PRA gaa ee a ee eg A ree cee ey Che DOG pene or ihe AT es OF gaith die nate er De a hang Ae Dah var versions ane neque creme p sacdnale shan for each deve he on CSS GS a Select the printer driver for the print share being added The Print Share List will be displayed If
170. ized Key WEERA TEPEE LES rae H ir Hashing Algorithm Localized Key DRA RAED FeE EPRI EEL ral kee Initial Account Creation Through the PSA s Web Interface Using the PSA s web interface users can create an SNMPv3 account by supplying a user name an authentication key and a privacy key The PSA will except either a localized or non localized key but not a password This was done by design to maintain backward compatibility with other J etDirect products How a user determines whether to use a localized or non localized key largely depends upon the SNMP application that will be used to communicate with the PSA If an SNMP application that is highly configurable such as Mg Soft Mib Browser is being used then a user can use a non localized key However if the user is using a less configurable tool such as the net SNMP tools the user may have to type a localized key that was generated from a password Note A valid key is 32 characters long and only contains the characters 0 9 a f and or A F Initial Account Creation Using Passwords Since the PSA only accepts authentication keys users must first convert their password to a key Follow these steps to convert a password to a key fy SMe Keypchange Old Fossphrasa Hew Passphrose JomesBand Update Mew Key Engine ID HOODOTesE0e7 Ob 4aSshesz4l ze Localire Keys Old Fey MDS DES here Kary Ceol eS FSP ol o T AicchabSbc4bb4 MOB DES Random Opt Change Key Va
171. king are configured correctly and that the network infrastructure such as the default gateway is configured and is operational Failed WINS name resolution 210 Level Error Category Networking Description The PSA could communicate with the WINS server but could not resolve the name A properly configured WINS server is essential for the proper operation of the PSA If the PSA cannot use the WINS server to resolve IP addresses it will not be able to communicate with the device Action The NT Domain Name might have been misspelled on the Microsoft Network Settings page in the web interface under Networking Make sure the network has a WINS server configured and the WINS server address on the Microsoft Network Settings page is correct Make sure the WINS server has an entry for the device being looked up For example if the WINS server does not reply with the IP address of a Domain Controller the PSA will not be able to authenticate users Permission denied user not allowed to delete pause or resume print job 213 Level Error Category Security Description The user did not have proper access rights to delete pause or resume print jobs Access rights include e Print print pause and delete your own print jobs e Manage Documents pause and delete other user s print jobs e Full Control print pause and delete other user s print jobs delete printers and change security settings e No Access e Special Acce
172. l be retained e Any print jobs currently being de spooled from the PSA to the printers may be restarted automatically once the PSA is ready to function Follow these steps to restart the PSA 1 On the menu under Maintenance click Restart 2 cick RES to begin the reboot process Upgrading the Firmware on the PSA Before installing an upgrade save the current configuration of the PSA using the Backup feature One firmware version 2 3 x and not earlier versions can be upgraded to firmware version 2 4 x CAUTION This information should be automatically saved on the PSA but if a catastrophic event occurs during the upgrade for example a power failure it is possible that the configuration may be lost This step is precautionary Note If migrating to firmware version 2 4 x printers that had been added to earlier firmware versions 2 3 x or before need to be associated with their driver again To do this easily go to the Print Shares page and click Drivers for that print share In the drop down list select any other driver and click Er Then select the original driver and clic k again Use the following procedure to install an upgrade WN Download the firmware image hp from the HP support website and save it on a local hard drive or CD http www hp com cposupport The exact file location will be needed for step 3 Access the PSA s web interface and click Upgrade on the menu under Maintenance On the
173. lient migration from NT to 2K XP clients http www hp com go psa_whitepapers Driver Management Page Field Name Description Specify an operating system to display printer drivers for that operating system only Or select All Operating Systems to display all printer drivers installed on the PSA Shows installed printer drivers for List the printer drivers for the operating system specified above or lists all printer drivers if All Operating Systems is chosen Printer Drivers Each driver can have only one name the same as in the ini file regardless of the number or type of printers associated with it If a driver is displayed in blue and preceded with a tilde that driver has been disabled either by the user to prevent it from being used or by the system in the case that it failed to initialize during its installation When a driver is disabled it can be associated with a printer but will not be downloaded to a client PC for point and print The user will be prompted to install a driver locally When a client connects to a print share with a disabled driver it receives the name of the driver to install and a prompt requesting that the driver be installed If the administrator enables the driver it will be available to clients through point and print if the client connects to a print share associated with that driver To enable a driver e If the driver was disabled by the user click I
174. lient s old printer driver which referred to the previous printer name 10 11 ed a The status of a print job is Unknown on the Jobs page for that printer in the web interface am trying to print a large print file Is there a maximum size of print job that the PSA will handle There are a lot of jobs spooled on the PSA Is there a limit am trying to print in Landscape mode Duplex mode or multiple copies but the margins are offset The performance of the PSA is very slow when connecting to the PSA via Network Neighborhood or when opening a printer s Property Page in Network Neighborhood Delete the print job and resend it There is no limit for a file size that the PSA can handle Up to 10 000 jobs can be spooled at a time which might be further restricted by the disk space available on the PSA If you have not done so upgrade your firmware to version 2 4 x and initialize the driver for that printer Delete the print driver from the computer and delete the port created for it Install the print driver on the computer as a network printer and browse to the print queue on the PSA Several workarounds or solutions are available Performance issues can be subjective If printing seems to be slow using the PSA compare printing through some other means such as an LPR port on the workstation that prints directly to the printer s IP address A comparison helps to identify general network pri
175. lished by the Free Software Foundation If the Library does not specify a license version number you may choose any version ever published by the Free Software Foundation 14 If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these write to the author to ask for permission For software which is copyrighted by the Free Software Foundation write to the Free Software Foundation we sometimes make exceptions for this Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally NO WARRANTY 15 BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE THERE IS NO WARRANTY FOR THE LIBRARY TO THE EXTENT PERMITTED BY APPLICABLE LAW EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND OR OTHER PARTIES PROVIDE THE LIBRARY AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU SHOULD THE LIBRARY PROVE DEFECTIVE YOU ASSUME THE COST OF ALL NECESSARY SERVICING REPAIR OR CORRECTION 16 IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER OR ANY OTHER PARTY WHO MAY MODIFY AND OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE BE L
176. local administrator account can be changed through the the Administrators page Follow these steps to change a password for an administrator account Log on to the web interface On the menu under Security click Administrators The Administrators page is displayed Highlight the local administrator account for which the password is changing Click The Local Administrator Password page is displayed Type the new password in the New Password field Repeat the password in the Confirm New Password field Click oY Oe Nee The Administrators page will be displayed Once the administrator account name and password have been changed the current browser session is no longer authenticated and you will be prompted to re enter your password Re connect to the PSA using the new administrator account name and password Note Local administrator accounts on the PSA cannot be renamed If necessary delete the local account and then add it with its new administrator name Local Administrator Password Page Field Names Description Administrator Name Displays the administrator name Password Type the password The password is case sensitive and can contain alphanumeric characters and the following special characters _ Note The PSA will accept a null or blank password Confirm Password i Type the password again to confirm it if there is a password Then click to add this administrator to the PSA hp
177. m the Library and can be reasonably considered independent and separate works in themselves then this License and its terms do not apply to those sections when you distribute them as separate works But when you distribute the same sections as part of a whole which is a work based on the Library the distribution of the whole must be on the terms of this License whose permissions for other licensees extend to the entire whole and thus to each and every part regardless of who wrote it Thus it is not the intent of this section to claim rights or contest your rights to work written entirely by you rather the intent is to exercise the right to control the distribution of derivative or collective works based on the Library In addition mere aggregation of another work not based on the Library with the Library or with a work based on the Library on a volume of a storage or distribution medium does not bring the other work under the scope of this License 3 You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library To do this you must alter all the notices that refer to this License so that they refer to the ordinary GNU General Public License version 2 instead of to this License If a newer version than version 2 of the ordinary GNU General Public License has appeared then you can specify that version instead if you wish Do not make any other change in these notices
178. main or workgroup as specified above in the Windows Domain or Workgroup field for NT 2K or Windows Server 2003 Select this to manually specify the domain controllers for NT 2K or Windows Server 2003 Type the domain controller s name or IP address to be added to the list of Configured Domain Controllers click to add it to the list Specified Domain Controllers Domain Membership Status Create an account for this device in the domain Domain Administrator Name Domain Administrator Password List of specified domain controllers to use for user name and password validation The PSA will try to communicate with the first domain controller in the list If the PSA cannot communicate with the first one it will then try the second domain controller in the list and so forth If none of the domain controllers in the list are successfully contacted the PSA will attempt to automatically discover a domain controller Click or to reorder the domain controller names in the list Click to take a domain controller off the list This is only valid when in manual mode The current status of the PSA s membership in the domain for NT 2K or Windows Server 2003 Check this to create a new computer account for the PSA in the domain then enter the domain administrator user name and password below Note A WINS server must be specified in the WINS Server Addressfield on this page A valid administrator s name as stored
179. mat on one page booklet style format the print job into a printed booklet watermark print a watermark on each page of the document ZoomSmart scales a letter sized A4 document or poster to tabloid A3 or vice versa back to front prints the document in reverse order rotate 180 degrees rotates the document layout but not the paper If you are having problems with any of these features first update the firmware If the problem persists reinstall the driver and select the Use client side rendering with this driver checkbox when selecting the driver to use with the print share The problem should then be resolved If you are running version 2 5 XX of the PSA firmware make sure Client Side Rendering CSR is not selected for the particular printer driver you are using CSR drivers are only compatible with 2K or XP clients If you have a combination of 2K XP clients and NT clients either create separate print queues for each platform or create a single queue and only use the NT driver Newer Windows 2K and XP drivers now use a new print driver architecture This new architecture is not compatibe the PSA firmware 2 3 252 or older Upgrade the PSA firmware to 2 5 XX and reload the 2K XP printer driver Select the option to Use client side rendering Security Problems If the PSA is joined to a domain the domain password for the domain controller is included in the backup file When that PSA backup file is restored it might be
180. ment so program finishes printing faster toggle supported a Print directly to the printer toggle supported a Hold mismatched documents check box not supported a Print spooled documents first check box not supported the PSA always uses this behavior a Keep documents after they have printed check box not supported o Sharing tab a Not Shared toggle not supported may be selected but will be ignored a Shared toggle supported a Share Name text field not supported a Alternate Drivers not supported o Security tab a Permissions button supported a Auditing button not supported a Ownership button not supported Can I use a hyphen in the PSA name The PSA name entered on the Microsoft Network Settings page can contain up to 15 alphanumeric characters It may also contain dashes and underscores _ The hostname cannot begin with a hyphen but it can have a hyphen within the name The hyphen cannot be the first character because the PSA name is is also used for the DNS name generation and the hyphen character is not allowed as the first character in a DNS name Can the PSA integrate into a Windows 2000 environment The PSA can use a Windows 2000 system for authorization and participate in a Windows 2000 domain in much the same manner as an NT 4 0 server can The Windows 2000 system must be configured to support NTLM V1 which is a version of the authorization protocol used by Windows system Can the PS
181. mes Info ZIP or any variation thereof including but not limited to different capitalizations Pocket UnZip WiZ or MacZip without the explicit permission of Info ZIP Such altered versions are further prohibited from misrepresentative use of the Zip Bugs or Info ZIP e mail addresses or of the Info ZIP URL s 4 Info ZIP retains the right to use the names Info ZIP Zip UnZip WiZ Pocket UnZip Pocket Zip and MacZip for its own source and binary releases Vim is Charityware You can use and copy it as much as you like but you are encouraged to make a donation to orphans in Uganda Please read the file doc uganda txt for details There are no restrictions on distributing an unmodified copy of Vim Parts of Vim may also be distributed but this text must always be included You are allowed to include executables that you made from the unmodified Vim sources your own usage examples and Vim scripts If you distribute a modified version of Vim you are encouraged to send the maintainer a copy including the source code Or make it available to the maintainer through ftp let him know where it can be found If the number of changes is small e g a modified Makefile e mailing the diffs will do When the maintainer asks for it in any way you must make your changes including source code available to him The maintainer reserves the right to include any changes in the official version of Vim This is negotiable You are
182. n 4 Click 5 Select the radio button for a certificate from a Certificate Authority and click gt next 6 Complete the fields on the Request Signed Certificate page as described above 7 Click gt next The Certificate Request in PEM Encoding page is displayed GC MEE Certificate Request in PEM Encoding Your catea request has been successfully craated amd is displayed haw in PEMMGaseb4 encoding Thiet Fagus must now ba ghan to a Ceatiicate Authi for certticate ganeation and signing To submit Fits request fo a Certificats Aationty use copy and paste fo stone in a tend dle Orca you harg received your perii aby click ierstall certificate onthe SSL Certticate screen to install it BEGIN CERTIFICATE REQUEST HITRUDCR rg IBAPAL Ree OVER ODE ed HS 4 WaR iL j Aueen ANB eqhkic SuDBAGEF ALOR QAugTRCgTE LGV Eos URULGR MAS Woe r Nk poet if wc UsGcr a RIKcTldnecTass ofoS jed hc hmiutouzscea A Akhi rnEeE ois Of Bulv EBJ dl IXet Arsvalhceuh s dT hPVesEpl tha Tehri ai Sudy LN Tai Re As k00 Leduc L Ta WIEC AVE LSA Spr Tbs HEBBAVARIGEAC UELI BCOLECES 75 TKErASEO OpietWdtiomegm 1 164Ph2 UT qihliremdfolbca Tey gike PDO pitaqyoPeguyypyT FqThevOl2DAULCAs prbegRiI ETA TSC TApOr HES RVAELL isaga iJ IOFOCEW POoJJOSNEESacllLip ENE CERTIFICATE REQUEST 8 Follow the instructions on the page and click Installing a Certificate from a Certificate Authority After the signed certificate has been received
183. n from NT to 2K XP clients http www hp com go psa_whitepapers Viewing and Managing Print J obs Use the Print J obs page to view the jobs for a selected print share Print Jobs Page Field Names Description File Name Name of the file s or print job s for this print share Status Status of the print job Printing currently printing on the print share Paused user paused the print job Spooling job is being spooled to the PSA by a client Queued job is queued and is waiting to be printed Unknown error occurred unknown status the user should delete the print job with this status User Name of the client user who submitted each print job Date Date the print job was sent Size Size of the print job in bytes Delete Delete this specific print job hp print server appliance a Print Jobs Sus User Date me Delete O roportda printing joe_markeling May 1 2009 Sid She delete all jobs CE onefresh To manage print jobs for a print share follow these steps Select Print Shares in the web interface under Print Services The Print Share List page is displayed Find the appropriate print share and click in the Jobs column for that print share The Print Jobs page is displayed 3 To delete a print job click on the line for the print job Or click X delete all jobs to delete all jobs as displayed for the print share Nr 4 Click
184. n the Admin Accounts Domain Accounts page in the web interface under Security gt Administrators Changed DNS server address 425 Level Informational Category Administrative Description The DNS server address has been successfully changed on the TCP IP and DNS page in the web interface under Networking Changed SSL encryption level 426 Level Informational Category Administrative Description The level of SSL encryption used for encrypting the http data has been changed successfully Installed self signed certificate 427 Level Informational Category Administrative Description A new self signed certificate signed by the PSA has been created and is now on the PSA Note If the administrator s name cannot be determined and is displayed as None then it must have been changed using the front panel Generated a certificate request to send to a certificate signing authority 428 Level Informational Category Administrative Description A certificate signing request has been generated the user now needs to send this request to the Certification Authority to sign and install the certificate Installed certificate from a certificate signing authority 429 Level Informational Category Administrative Description The new certificate that was requested from the Certification Authority has been installed on the PSA The new certificate will be used for future connections Failed to install certificate fr
185. nce the corrupted data will be automatically corrected during its next uninterrupted bootup It is always a good idea to have a backup of the settings and files in case they need to be restored After a power outage or any other improper shutdown the PSA may experience so many errors in its file system that it rebuilds the disk from the default image The printers network configuration and drivers will be not be automatically restored The configuration must be restored manually using the Restore functionality with the last configuration manually backed up Contact HP General Information The central location on HP s web site for the HP Print Server PSAs and similar products Online Customer Forum Where customers can discuss ideas and suggestions for using the HP PSAs Customer Support Lists all of the support options offered by HP and contact information such as phone numbers and e mail addresses Warranty and Regulatory Information Includes the product regulatory information and GNU public licenses Trademarks and Copyrights Includes all trademarks and copyrights for the HP PSAs Warranty Regulatory and Licensing Information Links within this page 44 4 Hewlett Packard Limited Warranty Statement Regulatory Compliance Declaration of Conformity Trademarks and Copyrights HP Software License HP Limited Warranty Limitation of Liability Software Copyright Notices Other Software Licenses
186. nd are independent from domain accounts Domain Lists all domain administrator accounts added to the PSA Administrators Local Administrator Accounts There must always be at least one local administrator account on the PSA When an administrator accesses the PSA using a local account an administrator name and password must be supplied for the PSA This user name and password are passed over the network in cleartext HP recommends accessing the PSA over SSL HTTPS to protect the confidentiality of information like passwords Local administrator accounts can be added deleted or their passwords can be changed through the Administrators page Note In order to use NT native tools without NT domain authentication enabled on the Microsoft Network Settings page the administrator logged onto the PC must have a local administrator account with the same name and password as the domain account Adding a Local Administrator Account New Local Administrator Page Field Names Description Administrator Name Type the new administrator name must be unique for the PSA The administrator name is case sensitive and can contain up to 20 alphanumeric characters and or the following special characters _ Type the password The password is case sensitive and can contain up to 14 alphanumeric characters and or the following special characters Password _ Note The PSA will acc
187. nding on the size and speed of the network it may take up to 30 minutes before the network s master browser list gets updated e Once this browser list gets updated on the PC that s hosting this list other PCs on the network will check the browser list and be able to see any new devices on the network via Network Neighborhood To find the PSA more quickly 1 Select Start Find then Computer 2 Type the IP address of the PSA then click Find Now Printing 1 Is there a maximum size print job can send to the PSA There is no limit for a file size that the PSA can handle 2 How does the PSA work with my existing print spooling strategy It can offload printing tasks from servers and localize print traffic at remote sites For details see the product overview 3 What is the Microsoft Point and Print feature and how does it work Point and Print is a Microsoft term to describe the automatic installation of drivers on the printer client It involves two steps The first step is installing a shared driver on a network print server or print server PSA The second step is pointing to the print server or PSA from a network client for driver installation on the client This process is also sometimes described as a network installation of a printer driver 4 Can the PSA accept print jobs from UNI X clients Print jobs are accepted from HP UX Solaris and any other RFC 1179 compliant LPD clients To set up LPD printing go to the
188. ndows 95 98 and Me Installing driver Installing Printer Drivers The inf file specified for the selected operating system is actually a driver for another operating system You will need to re run the Add Driver wizard and either specify the correct operating system for this inf file or specify a inf file that supports your selected operating system The inf file specified for Windows 9x is actually a driver for another operation system You will need to re run the Add Driver wizard and either specify the operating system supported by the selected inf file or choose a inf file that supports Windows 9x The inf file specified for the selected operating system is actually a driver for Windows 9x You will need to re run the Add Driver wizard and either specify Windows 9x as the operating system for this inf file or specify a inf file that supports your selected operating system Informational Informational Informational Informational The PSA has been unable to detect a Windows XP 2K or NT printer driver to correspond with this 9X driver e If a Windows XP 2K or NT driver has not yet been installed please install one before or with the specified 9X driver e If a Windows XP 2K or NT driver has already been installed it is possible that the driver name of the 9X driver does not match that of the higher operating systems Verify that the driver specified is the correct driver If it is the correct driver
189. necessary to join the PSA to that domain again because the password might have changed since the backup file was created About the Indicator Lights LEDs There are four indicator lights LEDs on the front of the PSA LED Normal Conditions LED LED Name Description Power LED ON when power is supplied to the PSA and it is turned on Network LIT when there is a connection between the PSA and other Activity network devices LED BLINKS when there is network activity between the PSA and other network devices Disk Activity LED ON when there is disk activity on the PSA Alert LED OFF during normal operations ON during bootup and shutdown oi LED Problem Conditions Condition Possible Cause Solution Power LED is not lit Power failure Restore AC power Bad power cord or power cord unplugged Verify and replace cord Network LED never Network connection is bad Verify network cable connections replace blinks cable Alert LED remains Critical failure is detected Note the message on LCD front panel lit after bootup is Power cycle the unit If the problem persists contact HP support completed Frequently Asked Questions Links within this document Configuration gt Printing Printer Drivers Power Outages Configuration 1 Can I use Web J etadmin to manage my PSA 2 Does the PSA support bootp or rarp 3 What features on the Properties Page in Network Nei
190. ng Enable LPD printing from ALL hosts Enable LPD printing from specified hosts Host Name or IP Address Specified LPD Hosts Disables LPD printing and print job management from any and all hosts Enables LPD printing and print job management from any and all hosts default Enables LPD printing and print job management from the hosts typed in the Host Names list on this screen If this is selected the fully qualified domain name or IP address of each computer system using LPD must be typed Without the fully qualified name this will not work Type the host name or IP address to be added to the Specified Hosts list This field is only active when Enable LPD printing from specified hosts is selected For example host name domain com or 1 160 10 240 Host names permitted to print and manage print jobs using LPD This field is active only when Enable LPD printing from specified hosts is selected hp print server appliance LFD Settings Disable LPO printing Enable UPD printing from ALL boats Enable LPD Erining anb trom specited hosts Hosi Name or iF Address Specified LPD Hosts ETE OL Configuring LPD Printing To enable or disable LPD printing follow these steps 1 In the web interface click LPD Printing on the menu under Networking 2 Complete the fields as described above SNMP Settings Links within this page SNMP and the PSA SNMP Traps SNMPv3 Configu
191. nistrative Description A host has been added to the list of recipients of SNMPv2 traps Removed destination from SNMP trap notification list 436 Level Informational Category Administrative Description A host has been deleted from the list of recipients of SNMPv2 traps Enabled redirection to HTTPS 437 Level Informational Category Administrative Description Redirecting the http request to the secure port has been enabled Any http request for port 80 will be sent over the SSL secure socket layer Disabled redirection to HTTPS 438 Level Informational Category Administrative Description Redirecting the http request to the secure port has been disabled Any http request for port 80 will be processed by the web server as a non secure request and any https request will get processed as a secure connection Added WINS server 439 Level Informational Category Administrative Description The WINS server was added successfully on the Microsoft Network Settings page in the web interface under Networking Deleted WINS server 440 Level Informational Category Administrative Description The WINS server was deleted successfully on the Microsoft Network Settings page in the web interface under Networking Added DNS server 441 Level Informational Category Administrative Description The DNS server was added successfully on the TCP IP and DNS page in the web interface under Networking Deleted DNS
192. nknown use the PSA s IP address IP addresses are written as four numbers separated by periods where the first number is between 1 and 255 and the other three numbers are between 0 and 255 Retype the IP address in the format xxx Xxxx XXX XXX Subnet masks are written as four numbers separated by periods where the first number is between 1 and 255 and the other three numbers are between 0 and 255 Subnet masks must be well formed to match your network Retype the subnet mask in the format xxx xxx XXX XXX Retry the operation Confirmation message Self explanatory Informational Message Connected Invalid administrator name name Invalid Domain Controller Domain controller names must be alphanumeric with no spaces Dashes and periods are acceptable Invalid domain or workgroup name name Invalid hostname name Invalid password Invalid PSA Name The PSA name must be alphanumeric Dashes and underscores _ are acceptable It can be up to 15 characters long Invalid WINS Server Address wins address The WINS server address must be in the format xxx XXX XXX XXX Invalid Workgroup Name workgroup Joined to domain Not joined Cannot contact domain controller s Not joined No account for this device on domain controller s The domain controller name is not in domain domain Explanation Remedy Confirmation message The administrator name consists of the domainname administratorn
193. nless you have a separate signed agreement with HP License Grant HP grants you a license to Use one copy of the Software Use means storing loading installing executing or displaying the Software You may not modify the Software or disable any licensing or control features of the Software If the Software is licensed for concurrent use you may not allow more than the maximum number of authorized users to Use the Software concurrently Ownership The Software is owned and copyrighted by HP or its third party suppliers Your license confers no title to or ownership in the Software and is not a sale of any rights in the Software HP s third party suppliers may protect their rights in the event of any violation of these License Terms Copies and Adaptations You may only make copies or adaptations of the Software for archival purposes or when copying or adaptation is an essential step in the authorized Use of the Software You must reproduce all copyright notices in the original Software on all copies or adaptations You may not copy the Software onto any public network No Disassembly or Decryption You may not disassemble or decompile the Software unless HP s prior written consent is obtained In some jurisdictions HP s consent may not be required for limited disassembly or decompilation Upon request you will provide HP with reasonably detailed information regarding any disassembly or decompilation You may not decrypt the Software unless d
194. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission THIS SOFTWARE IS PROVIDED BY THE INTERNET SOFTWARE CONSORTIUM AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE INTERNET SOFTWARE CONSORTIUM OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE PSF LICENSE AGREEMENT FOR PYTHON 2 2 1 This LICENSE AGREEMENT is between the Python Software Foundation PSF and the Individual or Organization Licensee accessing and otherwise using Python 2 2 software in source or binary form and its associated documentation 2 Subject to the terms and conditions of this License Agreement PSF hereby grants Licensee a nonexclusive royalty free world wide license to reproduce analyze test perform and or display publicly prepare derivative works distribute and otherwise use Python 2 2 alone or
195. not allowed to distribute a modified version of Vim when you are not willing to make the source code available to the maintainer The current maintainer is Bram Moolenaar lt Bram vim org gt If this changes it will be announced in appropriate places most likely www vim org and comp editors When it is completely impossible to contact the maintainer the obligation to send him modified source code ceases It is not allowed to remove these restrictions from the distribution of the Vim sources or parts of it These restrictions may also be used for previous Vim releases instead of the text that was included with it Copyright 1988 1990 1993 by Paul Vixie All rights reserved Distribute freely except don t remove my name from the source or documentation don t take credit for my work mark your changes don t get me blamed for your possible bugs don t alter or remove this notice May be sold if buildable source is provided to buyer No warrantee of any kind express or implied is included with this software use at your own risk responsibility for damages if any to anyone resulting from the use of this software rests entirely with the user Send bug reports bug fixes enhancements requests flames etc and I ll try to keep a version up to date can be reached as follows Paul Vixie lt paul vix com gt uunet decwrl vixie paul c Copyright 1992 by Panagiotis Tsirigotis The author Panagiotis Tsirigotis grants permission to u
196. ns of the Library rather than a work that uses the library The executable is therefore covered by this License Section 6 states terms for distribution of such executables When a work that uses the Library uses material from a header file that is part of the Library the object code for the work may be a derivative work of the Library even though the source code is not Whether this is true is especially significant if the work can be linked without the Library or if the work is itself a library The threshold for this to be true is not precisely defined by law If such an object file uses only numerical parameters data structure layouts and accessors and small macros and small inline functions ten lines or less in length then the use of the object file is unrestricted regardless of whether it is legally a derivative work Executables containing this object code plus portions of the Library will still fall under Section 6 Otherwise if the work is a derivative of the Library you may distribute the object code for the work under the terms of Section 6 Any executables containing that work also fall under Section 6 whether or not they are linked directly with the Library itself 6 As an exception to the Sections above you may also compile or link a work that uses the Library with the Library to produce a work containing portions of the Library and distribute that work under terms of your choice provided that the terms permit modi
197. nter or application problems versus specific print server PSA problems e Upgrade the PSA firmware Click here to download the most current firmware version for the PSA The latest firmware revision 2 4 x or newer should fix the following conditions o Slow printing performance At first printing is fast afterwards printing seems to be very slow Turning the print PSA off then on seems to help o Slow Web Pages When attempting to access or make changes to the Web page for the PSA the Web pages are very slow o Locks up PSA locks up or is unable to print Turning the PSA off and then on seems to help e Verify the configuration of the DNS server with the network administrator An incorrectly configured entry on the DNS server for the PSA can cause delays o connecting to a printer in Network Neighborhood o delays displaying the Property page in Network Neighborhood o in printing The PSA must have a correctly configured DNS server and the PSA requires entries in both the DNS server s forward and reverse lookup tables If the DNS server is not configured properly when a computer tries to connect to the PSA through Network Neighborhood it could take one to two minutes while the PSA tries to communicate with the DNS server Verify the DNS lookup tables using the following steps At the command prompt of a Windows NT or Windows 2000 computer type the following commands o The following command verifies an entry for the
198. numeric and can contain the following special characters 1 Invalid domain account name name Invalid domain name name Invalid domain account name Valid characters are Insufficient disk space to write file name Invalid password set It is not permitted to remove name The PSA grants administrator access to members of this group Joined to domain controller s No account for this device on the Domain Controller No group or user list returned Try again or type in the name s The port number must be between 0 and 65535 Reapply the last command Explanation Remedy The domain controller s cannot be contacted Check that you have entered the correct Domain Controller Type a name for the user account Informational The domain controller cannot be contacted Check that you have entered the correct Domain Controller Informational Retype the domain account name The domain controller is currently unavailable Check that you have entered the correct Domain Controller Informational Retype the domain name and password Retype the administrator name Retype the administrator name Retype the administrator name Retype the administrator name Internal Error Try reducing the number of queues Retype the domain controller password This Domain Admins group cannot be deleted Informational An account must be created on the Domain Controller before joining the domain N
199. o groups or users were returned by the Domain Controller Try again or type the name manually No password set Not configured No DNS entry for domain controller name s No entry in the WINS server for the domain No entry in the WINS server for the Domain Controller Passwords don t match The password and confirmation do not match Primary The administrator account name and password changes have been applied The Administrator Name contains invalid characters The allowable characters are characters The Administrator Name is too long The maximum length is length The Password contains invalid characters The allowable characters are characters The Password is too long The maximum length is length Unable to join domain domain Unknown role SSL Certificate Page Message Invalid common name Invalid period Backup Restore Upgrade and Restart Pages Message A downgrade is in process Please wait until the process is complete The domain administrator name or password is incorrect Retype them Informational Informational Informational Informational Retype the password and confirmation password Make sure the passwords typed in both fields are the same Informational Confirmation message Retype the Administrator Name Retype the Administrator Name Retype the password Retype the password The PSA was unable to join the domain Check the domain name Information
200. ogram and copy and distribute such modifications or work under the terms of Section 1 above provided that you also meet all of these conditions a You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change b You must cause any work that you distribute or publish that in whole or in part contains or is derived from the Program or any part thereof to be licensed as a whole at no charge to all third parties under the terms of this License c If the modified program normally reads commands interactively when run you must cause it when started running for such interactive use in the most ordinary way to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty or else saying that you provide a warranty and that users may redistribute the program under these conditions and telling the user how to view a copy of this License Exception if the Program itself is interactive but does not normally print such an announcement your work based on the Program is not required to print an announcement These requirements apply to the modified work as a whole If identifiable sections of that work are not derived from the Program and can be reasonably considered independent and separate works in themselves then this License and its terms do not apply to those sections when you distribute them as separate works But when you distri
201. om a certificate signing authority the certificate credentials do not match the pending request 430 Level Error Category Administrative Description The attempt to install or replace the existing certificate on the PSA has failed due to the certificate s public key Action Ensure that the signed certificate is being installed against the same certificate request This means modifications cannot be made to the signed certificate after it has been received from the certificate authority The signed certificate must also belong to the same PSA on which the certificate request was generated Enabled SNMP v1 v2 431 Level Informational Category Administrative Description SNMP v1 v2 has been enabled In RO mode the agent will only respond to snmp get requests In RW mode the agent will respond to both snmp get and snmp set requests Disabled SNMP v1 v2 432 Level Informational Category Administrative Description SNMP v1 v2 has been turned off The PSA will no longer respond to SNMPv1 v2 requests However registered hosts will still receive traps Enabled SNMP v3 433 Level Informational Category Administrative Description An SNMPv3 account has been created and installed on the PSA Disabled SNMP v3 434 Level Informational Category Administrative Description All SNMPv3 accounts have been removed from the PSA Added destination to SNMP trap notification list 435 Level Informational Category Admi
202. on This library is distributed in the hope that it will be useful but WITHOUT ANY WARRANTY without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE See the GNU Library General Public License for more details You should have received a copy of the GNU Library General Public License along with this library if not write to the Free Foundation Inc 59 Temple Place Suite 330 Boston MA 02111 1307 USA Also add information on how to contact you by electronic and paper mail You should also get your employer if you work as a programmer or your school if any to sign a copyright disclaimer for the library if necessary Here is a sample alter the names Yoyodyne Inc hereby disclaims all copyright interest in the library Frob a library for tweaking knobs written by James Random Hacker lt signature of Ty Coon gt 1 April 1990 Ty Coon President of Vice That s all there is to it Copyright c 2000 Gregory Trubetskoy All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided wit
203. on Full legal name of your company Organizational Unit Common Name Specific department or division within your organization Validity Start Date The start date for the validity of the certificate Validity Period Days Validity period for the certificate in days The default is 365 days hp print server appliance Self Signed Certificate Common Hame HP Print Appliance 00 1 oe ec Onganizathon Heelatt Packand co Organizational Unit witii Validay Start Osie na Mons 200 08 5747 Validay Pernod Days 365 AUT nohailing the mew neritic he wail evade any thing party ceviiicate Meal ane curently inatoted on iis Pra Serer aio Cs CIGD G3 To create a new self signed certificate follow these steps 1 At a workstation access the web browser and type the IP address for the PSA 2 Log on to the PSA as an administrator The default user name is admin and the default password is admin 3 Under Security on the menu select SSL Certificate See the description of the fields above for more information Click Select the radio button for a self signed certificate and click gt next Complete the validity start date for the certificate Complete the validity period for the certificate Click K OO lee Requesting a Signed Certificate from a Certificate Authority To request a signed certificate from a Certificate Authority select the radio
204. on a medium customarily used for software interchange or c Accompany it with the information you received as to the offer to distribute corresponding source code This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer in accord with Subsection b above The source code for a work means the preferred form of the work for making modifications to it For an executable work complete source code means all the source code for all modules it contains plus any associated interface definition files plus the scripts used to control compilation and installation of the executable However as a special exception the source code distributed need not include anything that is normally distributed in either source or binary form with the major components compiler kernel and so on of the operating system on which the executable runs unless that component itself accompanies the executable If distribution of executable or object code is made by offering access to copy from a designated place then offering equivalent access to copy the source code from the same place counts as distribution of the source code even though third parties are not compelled to copy the source along with the object code 4 You may not copy modify sublicense or distribute the Program except as expressly provided under this License Any attempt otherwise to copy modify sublicen
205. on will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally NO WARRANTY 11 BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE THERE IS NO WARRANTY FOR THE PROGRAM TO THE EXTENT PERMITTED BY APPLICABLE LAW EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND OR OTHER PARTIES PROVIDE THE PROGRAM AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU SHOULD THE PROGRAM PROVE DEFECTIVE YOU ASSUME THE COST OF ALL NECESSARY SERVICING REPAIR OR CORRECTION 12 IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER OR ANY OTHER PARTY WHO MAY MODIFY AND OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE BE LIABLE TO YOU FOR DAMAGES INCLUDING ANY GENERAL SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES ORA FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If
206. or with modifications and or translated straightforwardly into another language Hereinafter translation is included without limitation in the term modification Source code for a work means the preferred form of the work for making modifications to it For a library complete source code means all the source code for all modules it contains plus any associated interface definition files plus the scripts used to control compilation and installation of the library Activities other than copying distribution and modification are not covered by this License they are outside its scope The act of running a program using the Library is not restricted and output from such a program is covered only if its contents constitute a work based on the Library independent of the use of the Library in a tool for writing it Whether that is true depends on what the Library does and what the program that uses the Library does 1 You may copy and distribute verbatim copies of the Library s complete source code as you receive it in any medium provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty keep intact all the notices that refer to this License and to the absence of any warranty and distribute a copy of this License along with the Library You may charge a fee for the physical act of transferring a copy and you may at your option offer warranty protection in exchange for
207. ormation is available the picture of the PSA image on the Overview page in the web interface will change This feature is enabled by default and can be disabled by unchecking this box Each time an image is retrieved it is logged like any other visit to HP s website In addition each request includes the serial number of the requesting unit HP uses this to provide support information relative to the specific unit No personally identifiable information such as user name email address or physical address is gathered as part of this process HP does monitor web logs in order to understand our customers and improve our products All web transactions are subject to HP s privacy policy which can be found at http www hp com country us eng privacy htm Product Specifications Links within this page Model Number System Requirements Language Options and Power Cord Requirements Supported Clients Supported Printers Supported Web Browsers What Ships in the Box Security Features Physical Specifications Electrical Specifications Environmental Specifications tee tee te ete de ede te Safety Certifications Figure 1 The HP Print Server Appliance 4250 J 7941 Model Number Product Model number HP Print Server PSA 4250 J7941A System Requirements The computer printing to the PSA must be running TCP IP and have Microsoft Windows 95 98 NT 2000 ME XP or other operating systems running LPD Language Options and
208. ote queue name of LP and not Ip while other manufacturer of print servers or systems administrators may choose different names hp print server appliance Add Print Share Step 1 of 3 identity Printer identify the printer you want io add bo your prind zarar appliance IP Address or Hosinaene Printer Metyvork Connector HP Jetdinect imenal card or singit port meternal box C HP Jetdinect 3 port external box Jetdinect port Pott Another manufacturers Indama card or edema box Remote Queue Name fa g LF RAW elt maman o Add Print Share Step 2 of 3 Type the print share name and description Add Print Share Step 2 of 3 Page Field Names Description Print Share The print share name is displayed in Network Neighborhood or in My Name Network Places as a print share configured on the PSA It can be up to 79 characters long including alphanumeric characters and the following special characters Print share names longer than 12 characters might cause problems with Windows 9x and ME or MS DOS clients Various LPD implementations might also have length restrictions Print Share Description of the print share Description optional Hide this Select this option to hide this print share s name in Network Neighborhood print share in or in My Network Places for clients This does not prevent the print share Network from being used just from being displayed in Netwo
209. ounts page is displayed 4 Complete the fields as described below Nr 5 Click i ok The message Administrator Account Added is displayed Admin Accounts Domain Accounts Page Field Name Description Type Account Name Type the account name for the domain in the format Domain Accountname Select Account s from The drop down list contains names of the primary domain and all trusted domains Domain Members Shows all of the members in the domain specified in the above field To show users also click 9 ppm To highlight multiple groups users use the Control or Shift key Accounts to add as Administrators Lists all groups and or users with administrator rights for the PSA hp print server appliance Administrators Domain Acirinistr at ons Corman Avthenticaion mode is hot enabled To enable Domain Authentication mode wee Mitroson Matera setings Note If the Domain Controller is not available administrators can use their local account When browsing for domain accounts from the Select Account s from list of domains the PSA may ask for a user name and password The reason is the domain s security policy requires a trusted user account to connect to the domain controller to retrieve the account list A machine account i e the PSA s is not sufficient when the domain is configured to protect enumeration of users and groups account information Single Sign On SSO Single Sign On allows an admin
210. our site In addition this log helps HP customer support in resolving problems Events are listed on the log Event log filters are used to sort the events displayed Event Log Page To access the Event Log click Event Log on the Main Menu under General in the web interface on the appliance The Event Log page is displayed hp print server appliance Event Log full unfiltered log Titres arti Level Ive ID Message Ge at iwigi A ERR NET 210 Failed WiNS name redolusen Liineahed name HPRSGRD_ F5a253 WINS sore address 15 24 216 81 O31 120002 4 ERR NET 210 Failed iNS mame rasolumon Lininesohead nami HPRSAFO 253253 WINS Server address 15 24 276 81 Oa2irsazid ERR SEC 218 Authorization fied local ateount Lier name Admin Admin Admin Admin Admin Admin Admin Admin Admin Admin Admin Oo 220642 35 GP INFO ADM 404 Upgraded firere Oid fenrware version pee upgrade 7 4 91 3 0mega Mere irman weston post upgrady 2 4 324 amega Administrator mamie admin E GE GEE GED GED Buttons on the Event Log Page Button Name Description Displays the Event Log Filters page where filters can be selected based on the message level and type Only those events with the Level s and or Type s selected will be included on the Event Log page Displays any new events that have occurred Use this button instead of the browser s Refresh button to ensure consistent behavior Saves the event
211. ows 95 98 ME and older systems might not be able to access the share The printer address can only contain alphanumeric characters spaces dash underscore _ plus sign ampersand amp comma and period When Other print server is selected the Remote Queue Name field must be completed Specify the Remote Queue Name of this printer A print share is being created and the client side rendering box is checked but thie driver is not capable of client side rendering A print share is being created and the driver selected is capable of client side rendering This is a warning to not use drivers capable of client side rendering with NT clients Explanation Remedy Are you sure you want to remove the following drivers The HP Laser et 4 printer driver is essential and cannot be deleted The following drivers are in use and cannot be deleted To delete these drivers you must either delete the printers that use them or associate a different driver with those printers Cannot add drivers using this operating system and or browser To add drivers your PC must be running one of the following OSs and browsers e Windows NT 4 0 Windows 2000 or Windows XP e Internet Explorer 5 0 or above or Netscape 4 7 or above You attempted to delete more than one active driver Only one active driver may be deleted at a time Only the first active driver in the list will be deleted Deleting this XP 2K dri
212. ows 2000 drivers can include N up printing multiple pages in a reduced format on one page booklet style format the print job into a printed booklet watermark print a watermark on each page of the document ZoomSmart scales a letter sized A4 document or poster to tabloid A3 or vice versa back to front prints the document in reverse order rotate 180 degrees rotates the document layout but not the paper oO 0 0 0 0 0 If you are having problems with any of these features first update the firmware If the problem persists reinstall the driver and select the Use client side rendering with this driver checkbox when selecting the driver to use with the print share The problem should then be resolved 8 What does it mean to Use client side rendering with this driver A new Windows 2K and XP printer driver architecture has been developed where advanced printing features like the following are handled by a print processor in the print server N up printing multiple pages in a reduced format on one page booklet style format the print job into a printed booklet watermark print a watermark on each page of the document ZoomSmart scales a letter sized A4 document or poster to tabloid A3 or vice versa back to front prints the document in reverse order rotate 180 degrees rotates the document layout but not the paper oO 0 0 0 0 0 If you intend to use this 2K or XP version of the driver with the PSA select Use Client
213. oyed to client machines using point and print the drivers must be properly initialized In order for drivers to be deployed to client machines via using and print the drivers must be properly initialized Unable to initialize driver for this version of firmware This driver will be disabled for automatic driver download Clients attaching to the printer will have to supply their own driver Unauthorized to Perform this Action You are logged into the PC as user_name That user does not have administrative or power user rights on this PSA To perform this action you must be logged into Windows with a user name that has e administrative or power user rights on this PC e administrative rights a corresponding admin account on the PSA Unauthorized to Perform this Action You are logged into the PC as user_name That user does not have administrative rights on this PSA To perform this action you must be logged into Windows with a user name that has e administrative rights on this PC e administrative rights a corresponding admin account on the PSA Windows 9x Driver Name Mismatch The specified Windows 9x setup information file does not contain a driver named driver_name Select the driver that you want to install for your Windows 9x clients then click ER To specify a different Windows 9x setup information file click X cancel Print Shares Page Message Name is a reserved name Active A printer alrea
214. panel of the PSA to enter the IP address Then press IP Address 010 001 002 003 If DHCP Press to continue If Manual Use the number buttons on the front panel of the PSA to enter the subnet mask Press Y Subnet Mask 255 000 000 000 es If DHCP Press to continue If Manual Use the numbers on the front panel of the PSA to enter the default gateway Press Y Default Gateway 010 001 002 005 rN 1 If DHCP Press to continue Exit config Press p to exit Apply changes K Cancel changes E After a moment the PSA will resume displaying normal operating messages if starting the IP address is valid Hetwork Configuring the Link Speed and Duplex Mode Using the Front Panel These procedures explain how to configure the link speed 100 Mbps or 10 Mbps and the duplex mode full or half for the PSA using the front panel This can be done manually or the settings can be automatically detected which is the default The link speed is the speed at which the PSA communicates over the network The speed is expressed in megabits per second and is either 10 or 100 The duplex mode defines whether data can be sent at the same time it is received e Full duplex data can flow both directions at the same time e Half duplex data can only flow one way at a time and any attempt to do both at the same time creates a collision The current setting is displayed on the System Summary page
215. please contact HP support Informational Informational Invalid Driver Setup Information File file_ name could not be read or does not contain any printer drivers Please specify another driver setup information file inf Invalid Driver Setup Information File file_name does not contain driver information for specified_OS_ name Please specify another driver setup information file inf Invalid Driver Setup Information File file_name is not the correct file type This application can only install printer drivers using inf files Please specify another driver setup information file inf Invalid Driver Setup Information File No driver setup information file selected Please enter a driver setup information file inf Keep the existing driver Loading New Driver Replace Driver This driver has already been installed A version of this driver is already installed on the print server appliance Do you want to keep the existing driver or use the new one Applications may print differently with the new driver Optional I nstall driver_name drivers for additional operating systems Select the operating systems that will need drivers and specify the appropriate driver setup information files inf files Please wait while the driver_name printer driver is initialized Please wait while your driver_name printer drivers are installed Please wait while your printer drivers are initializ
216. print server appliance New Local Administrator Administrar Manic Pasawond Contim Password ard caat aaraii anam an Domain Administrator Accounts If Domain Authentication is enabled on the Microsoft Network Settings page administrators can be identified by their Microsoft domain account A list of domain user or group accounts can be configured in the PSA This list is similar to the entries in the Administrators group of a Windows member server When administrators access the PSA they can provide their domain identity see Single Sign On below If the name provided matches an entry in the Domain Administrators list or if they are a member of a domain group in the list they will be allowed access to the PSA management interface Note When there is a Local Administrator account name that is the same as an account name in the Domain Administrators list the PSA will first attempt to authenticate the domain account first see Single Sign On and Basic Authentication below If the password given does not match the domain account the PSA will perform Basic Authentication with the local administrator account Adding a Domain Administrator Account To add a domain administrator account follow these steps Log on to the web interface On the menu under Security click Administrators The Administrators page is displayed 3 Click under the list of domain administrators The Administrator Add Domain Acc
217. pted to access PSA but the request was but the request was denied because the user identity was not confirmed or user was not authorized to use the PSA Local account access to the PSA is supported when NT Domain authentication is disabled on the Microsoft Network Settings page in the web interface under Networking Action It is necessary for the administrator to take one or more of the following actions e retype the name and password combination e verify that the user account exists e monitor the log file for additional unauthorized access attempts Authorization failed domain account 219 Level Error Category Security Description The user attempted to access the PSA but the request was denied because the user identity was not confirmed or the user was not authorized to use the PSA Domain account access to the PSA is supported when NT Domain authentication is enabled on the Microsoft Network Settings page in the web interface under Networking Action It is necessary for the administrator to take one or more of the following actions e retype the name and password combination e verify that the user account exists e monitor the log file for additional unauthorized access attempts Rejected client connection due to resource limits 221 Level Error Category Administrative Description The PSA limits the number of simultaneous client printer connections For printing this limit is rarely an issue clients usually connect
218. ption to manually specify the IP address information for the PSA Each field must be entered manually IP address Enter an IP address without leading zeroes for example 10 1 2 3 Subnet Mask Enter a subnet mask for example 255 0 0 0 Default Gateway Primary Domain Name Server DNS Address Secondary Domain Name Server DNS Address DNS Domain Name Check for Print Server PSA firmware updates during each web login Enter the IP address of the default gateway used to access other networks or subnets This enables the PSA to communicate with devices such as printers and PCs on different subnets If a gateway is not available or if the address of the gateway is unknown enter the same IP address used for the PSA or leave this field blank or empty The DNS enables network resources such as PCs and printers to be specified by their friendly names instead of their IP addresses In order to use this functionality specify the primary DNS server by its IP address not by its friendly name Once the primary DNS is specified use friendly names across other configuration areas of the PSA such as the queue configuration screen If the network does not have a DNS leave this field blank or empty If the primary DNS is unavailable this server will be contacted Specify the secondary DNS server by its IP address not by its friendly name After this is server specified use friendly names across other con
219. r Hostname fis 24 227 60 Printer Meteor Contador HP Jatdirect intemal card or single port exienial box C HP Jebdirect 3 por eotemal bow dadini poet Port 1 C another manutactuners internal card or extemal bow Remote Queue Mane fe g LP RAN ete CED CE GE To make any changes to this page follow these steps Select Print Share in the web interface under Print Services Click sr for the print share If desired make any changes to the print share s properties print test page If desired click amp to print a test page oe GN Click I ok The Print Share List page is displayed again Printer Driver Page The Driver page is displayed when Drivers is selected for a specific print share on the Print Share List page The Drivers page displays all printer drivers that are installed on the PSA A different printer driver can be selected in the list of installed drivers for the specified print share See also Printer Driver Management The print share name is displayed at the top of the Drivers page This is the name of the print share as typed in the Print Share Name field on the Add Print Share page in the web interface This name is displayed in Network Neighborhood or in My Network Places as an available print share configured on the PSA Drivers Page Field Name Description Client Printer Driver Displays all printer drivers added to the PSA and highlights the driver currently associated with
220. r and click Next On the screen showing available ports click on the Add Port button On the Printer Ports screen select Local Port and then click New Port On the Port Name screen type the UNC name for the printer in the following format and click OK we lt psa_name gt lt printer_name gt where psa_name is the name of the PSA and printer_name is the name of the printer Click OK On the Printer Ports screen click Close On the screen showing available ports select your newly created port and click Next On the screen showing printer manufacturers and printers select a printer driver and then click Next 10 On the screen asking for a printer name enter your printer name and click Next 11 On the screen referring to printer sharing select Not Shared and click Next 12 Click Finish OOM Configuring Printing for UNI X Clients The following topics are discussed in the section e configuring print queues for BSD like systems e configuring print queues using SAM HP UX systems e printing a test file A print queue must be set up for each printer or printer personality text PCL or PostScript used If printing text documents from UNIX clients to an HP Jetdirect print server a special queue must be configured on the PSA First add the printer through the Print Share page in the web interface On the Identify Printer page for connectivity select Other and then specify the Remote Queue Name For the remot
221. r password list Cancel Configuring I nternet Explorer By default URLs including IP addresses with periods in the name for example http www hp com and http 10 0 0 1 or URLs that go through a proxy server are not included in a browser s local intranet An administrator can view or change their local intranet settings in the I nternet Options page under the Security tab by selecting Local Intranet and clicking on the Sites button In order to have SSO work with IP addresses the proxy must be bypassed for that IP address type the IP address under Tools gt Options gt Connections gt Proxy Server gt Advanced gt Exceptions Also under Security gt Sites select Include all sites that bypass the proxy server SSL Links within this page SSL Certificates SSL Certificate Page Viewing the SSL Certificate Requesting a New Certificate Self Signed Certificate Installing a Certificate from a Certificate Authority C E 4 4 Links to related pages Related System Messages Troubleshooting the PSA SSL Certificates SSL TLS secures the PSA s web interface by providing data privacy data integrity and server authentication SSL TLS Secure Sockets Layer SSL v2 v3 and Transport Layer Security TLS v1 is based upon the exchange of certificates that are used to validate a public key These public keys are then used to generate a shared secret key that is used for encryption and decryption Encrypting the d
222. ral Information This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause interference and 2 this device must accept any interference received including interference that may cause undesired operation Pursuant to Part 15 21 of the FCC Rules any changes or modifications to this equipment not expressly approved by the Hewlett Packard Company may cause interference and void the FCC authorization to operate this equipment The Federal Communications Commission has prepared a booklet titled Interference Handbook 1986 which may be helpful to you This booklet stock number 004 000 004505 7 may be purchased from the Superintendent of Documents U S Government Printing Office Washington D C 20402 This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against interference in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause interference to radio communications Installing this equipment in an FCC Level B product results in an FCC Level A Composite System as defined in the FCC Rules and Regulations when attached to an Ethernet IEEE 802 3 802 3u or Token Ring IEEE 802 5 network European Community Thi
223. ranet settings in the Internet Options page under the Security tab by selecting Local Intranet and clicking on the Sites button Note The single sign on feature of the PSA only works with Microsoft s Internet Explorer The PSA name entered on the Microsoft Networking Settings page can contain up to 15 alphanumeric characters It may also contain dashes and underscores _ The hostname cannot begin with a hyphen but it can have a hyphen within the name The hyphen cannot be the first character because the PSA name is is also used for the DNS name generation and the hyphen character is not allowed as the first character in a DNS name The PSA can use a Windows 2000 system for authorization and participate in a Windows 2000 domain in much the same manner as an NT 4 0 server can The Windows 2000 system must be configured to support NTLM V1 which is a version of the authorization protocol used by Windows system Yes if the printer supports LPD You may have to know the proper LPD remote queue name for the print server Many print servers will work without specifying a remote queue name use the default HP PRINT SERVER setting however some require a special string in order to work The LPD remote queue name can be obtained from the print server vendor No You can assign IP addresses via DHCP the front panel and a web browser After an IP address is assigned you must use a web browser to finish configuring the P
224. rcent at 40 degrees C 104 degrees F Temperature Operating 5 degrees Celsius C 41 degrees Fahrenheit F to 40 degrees Celsius 104 degrees F Non operating 40 degrees Celsius 38 degrees F to 70 degrees Celsius 158 degrees F Safety Certifications Products comply with e IEC 950 1991 A1 A2 A3 A4 EN60950 1992 A1 A2 A3 A4 e UL 1950 e CSA 950 e NOM 019 SCFI 1994 Web Interface for the PSA Links within this page gt Supported Web Browsers Accessing the Web Interface Menu Overview Page 4 Changing the Date and Time The PSA contains a web server The web server allows administrators to manage the configuration of the PSA review the status of the device and view print jobs from your web browser This page explains what can be configured through this interface and how to access the web interface on the PSA Supported Web Browsers The following web browsers are supported e Netscape Navigator 6 0 or greater e Microsoft R Internet Explorer 5 5 or greater Accessing the Web Interface Follow these steps to access the web interface 1 Open the web browser 2 In the Location field Netscape Navigator or Address field Microsoft Internet Explorer enter the IP address of the PSA as displayed on the front panel liquid crystal display LCD for example http 10 1 2 3 Or type the DNS name of the PSA if the DNS server has been configured with the correct name entry 3 Type the a
225. red on the Power LED is lit To turn off the PSA press the Power button and wait for about 20 seconds for the PSA to power down The PSA performs an orderly shutdown If print jobs are printing when the PSA is powered down the print jobs will not be completed J obs waiting to be printed will resume printing when the PSA is fully booted If the PSA loses power unexpectedly and is not powered down spooled print jobs that had not yet begun printing or print jobs that were in the middle of printing will resume printing when power is restored and the PSA is powered up again If however the integrity of the PSA or print jobs are compromised print jobs that were not spooled would have to be resent Front Panel Display The LCD display has two rows of 16 characters or spaces It is used to display the status of the PSA and to display configuration information entered at the front panel The following arrow buttons are displayed on the front panel Indicates that the menu can scroll 4 scrolls up scrolls down nF Indicates that choices can be toggled through Enter and Cancel Buttons Enter Accept changes or begin an operation Cancel changes or end an operation Direction Buttons Up Press this button to return to the previous menu item or step of a procedure If Enter hasn t been pressed changes will not be applied Down Press this button to advance to the next menu item or step of a procedur
226. refresh to update the page or click ES to return to the Print Share List page Print Share Properties The Print Share Properties page is displayed when Properties is selected for a specific print share on the Print Share List page Use the Properties page to e display and or modify the properties of a selected print share including the print share s name printer s IP address or description e pause and resume printing from the print share e print a test page Properties Page Field Names Description Print Share Description optional Description of the print share Hide this print share in Network Neighborhood or My Network Places Print a banner page with each print job Pause printing from this print share Printer IP Address or host name Printer Network Connector Select this to hide this print share s name in Network Neighborhood or in My Network Places for clients This does not prevent the print share from being used just from being displayed in Network Neighborhood or in My Network Places Select this to print a banner page preceding every print job The contents of the banner page are not configurable Check this box to pause printing from this print share To resume printing from this print share clear this box IP address or host name of the printer that will be servicing the print jobs in this queue This may be the DNS name or the IP address of the network printer for example hpprint share my
227. result the hostname provided on the TCP IP and DNS Settings is being used If no hostname has been provided the default value is used Action The administrator should ensure that they have provided a valid and appropriate hostname on the TCP IP and DNS Settings page DHCP provided domain name discarded value is too long or invalid Using manually provided value 112 Level Informational Category Networking Description The DNS domain name provided by DHCP was longer than the maximum number of characters allowed or it included invalid characters As a result the DNS domain name provided on the TCP IP and DNS Settings page is being used If no DNS domain name has been provided the default value is used Action The administrator should ensure that they have provided a valid and appropriate DNS domain name on the TCP IP and DNS Settings page Cannot communicate with domain controller 200 Level Error Category Administrative Description The domain controller experienced one of the following conditions network problems cable malfunction hub or router problems not on the network the IP address or host name specified is not a domain controller power is disconnected or interrupted Action Check the Domain Membership Status field on the Microsoft Network Settings page in the web interface under Networking to verify that the PSA can communicate with the domain controller If the domain controller the PSA was communicating wi
228. ring SNMP Settings Links to related pages Related System Messages Troubleshooting the PSA SNMP and the PSA The SNMP agent supports MIB II Management Information Base II Host Resources MIB portions its own MIB called the HP PRINT SPOOLER APPLIANCE MIB SNMPv3 and SNMPv2 Traps Note For a copy of the HP PRINT SPOOLER APPLIANCE MIB check http www hp com SNMP Traps Users can register for traps using the following as outlined in RFC 2573 e snmpTargetAddrTable e snmpNotifyTable e snmpTargetParamsTable Registering for traps through the tables can be difficult it is recommended that only administrators familiar with the tables register for traps in this manner A simple interface to the tables was added to the PSA s interface Registering for Traps The SNMP Settings page is displayed when SNMP is selected on the menu under Networking SNMP Settings Page Field Name Description Enable SNMPv3 Select this to enable SNMPv3 User account information will be saved and restored during a firmware upgrade User Name User name must be between 2 and 32 characters long Authentication Key Must be 32 characters long Can be numbers 0 9 or characters a f or A F Privacy Key Engine ID Can be numbers 0 9 or characters a f or A F SNMP v3 engine s administratively unique identifier used solely for identification not for addressing SNMP Traps IP Address Type the
229. rinting multiple pages in a reduced format on one page booklet style format the print job into a printed booklet watermark print a watermark on each page of the document ZoomSmart scales a letter sized A4 document or poster to tabloid A3 or vice versa back to front prints the document in reverse order rotate 180 degrees rotates the document layout but not the paper e The second line lists the security rights for the printer who can print and at what level of access Note For Jetdirect internal cards or single port external print servers the Remote Queue Name will be raw For Jetdirect 3 port external print servers the Remote Queue Name will be raw1 raw2 or raw3 Installed Printer Drivers Information This section lists the printer drivers installed on this PSA Diagnostic Report Links to related pages Administrator Visible Logs gt System Summary gt Troubleshooting the PSA Viewing and Printing the Diagnostic Report from the Web I nterface This page explains how to view and print the Diagnostic Report for the PSA from the web interface To access this report select Diagnostic Report in the web interface under Diagnostics This report can be printed using the print function of the browser The Diagnostic Report has the following sections Diagnostic System DNS WINS Servers Domain Controllers Printer Status Network Statistics v ev The Diagnostic Report is a background process that
230. rk Neighborhood or in Neighborhood My Network Places and My Network Places Print a Select this option to insert a banner page at the beginning of each print job banner page The contents of the banner page are not configurable with each print job hp print server appliance Add Print Share Step 2 of 3 Print Share Hame Eriera name for this print share This is the name offers will see when they browse to the Printers folder of this appliance using Wetwonn Weighiend of A Webeied Planes Frin Share Harma i Print Share Description optional I Hide this print share in woh Aorta and Aa otak Paros TO Print a banner page with ach priri job CES p ner CE hep o Add Print Share Step 3 of 3 Add Print Share Step 3 of 3 Page Field Description Client Printer Driver Displays all printer drivers currently installed on the PSA and highlights the driver currently associated with the specified printer To change the driver for the printer highlight a different driver and click 0 finish Or add a new driver by clicking on this page Client Do not select this option unless you are having problems with your W2K drivers Side working properly Symptoms include trouble with Rendering N up printing multiple pages in a reduced format on one page booklet style format the print job into a printed booklet watermark print a watermark on each page of the document ZoomSmart scales a letter s
231. rs appreciate your maintaining the version string guidelines as specified in the copyright But did not mean them to last as long as they did So if you want you may use any 2 N N gt 3 version string for future xinetd versions that you release Note that am excluding the 2 2 line using that would only create confusion Naming the next release 2 3 0 would put to rest the confusion about 2 2 1 and 2 1 8 C 1995 1998 J ean loup Gailly and Mark Adler This software is provided as is without any express or implied warranty In no event will the authors be held liable for any damages arising from the use of this software Permission is granted to anyone to use this software for any purpose including commercial applications and to alter it and redistribute it freely subject to the following restrictions 1 The origin of this software must not be misrepresented you must not claim that you wrote the original software If you use this software in a product an acknowledgment in the product documentation would be appreciated but is not required 2 Altered source versions must be plainly marked as such and must not be misrepresented as being the original software 3 This notice may not be removed or altered from any source distribution Jean loup Gailly jloup gzip org Mark Adler madler alumni caltech edu If you use the Zlib library in a product we would appreciate not receiving lengthy legal documents to
232. s XP drivers for 2K NT or 9x can be installed If the client OS is NT only drivers for NT and 9x can be installed hp print server appliance New Printer Driver Step 3 of 3 Optional metall HP DesignJet 1050C PSS drivers for additional operating syabas Select the Operating systems that will need Givers and spacity the appropriate driver setup intonation Ges i dia files D install a indires NT 40 driver O install a Virdee Sot 5 98 Mej cine If no duplicate drivers were found during installation the Installing Printer Drivers page is displayed If during installation a duplicate driver has been found you can either replace or keep the existing one Installing Printer Drivers page While the drivers selected are being installed and initialized this screen displays the status of each step Ifa driver has two versions being added one for client side rendering then these messages will appear twice The final status indicates the status of the driver for the client OS If the driver you are installing is a Unidriver you will see the file copy screen appear twice and initialize screen appear only once this is normal operation If initialization fails the driver is displayed on the Driver Management page as disabled This means that driver cannot be downloaded to client PCs for point and print To try initializing the driver again you must add the driver again through the Driver Management page
233. s is a class A product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures Electromagnetic Emissions FCC part 15 Class A U S A ICES 003 Canada CISPR 22 EN55022 Class A AS NZS 3548 Australia New Zealand Note For EU compliance see the Declaration of Conformity Safety Certifications Products comply with e e e e Australia This equipment complies with Australian EMC requirements IEC 950 1991 A1 A2 A3 A4 EN60950 1992 A1 A2 A3 A4 UL 1950 CSA 950 NOM 019 SCFI 1994 Canada This equipment complies with Canadian EMC Class A requirements Declaration of Conformity DECLARATION OF CONFORMITY according to ISO IEC Guide 22 and EN45014 Manufacturer s Name Hewlett Packard Company Manufacturer s Address 8000 Foothills Blvd Roseville CA 95747 5677 U S A declares that the product Product Name HP Print Server Appliance 4250 Model Number J 7941A HP Print Server Appliance 4200 Model Number J 4117A HP JetDirect 4000 Network Print Appliance Model Number J4107A conforms to the following Product Specifications Safety EN60950 1992 A1 A2 A3 A4 All IEC 950 1991 A1 A2 A3 A4 EN60825 1 1994 IEC 825 1 1993 Class 1 GB 4943 1995 EMC EN 55022 1998 CISPR 22 1997 Class A GB 9254 1988 EN 55024 1998 IEC 61000 4 2 1995 IEC 61000 4 3 1995 IEC 61000 4 4 1995 IEC 61000 4 5 1995
234. s is saved while the PSA s settings and files are being backed up Use the following procedure to restore backup settings On the menu under Maintenance select Restore Select the settings to restore o Administrator Accounts restores all administrator accounts previously added and saved in the backup of the PSA o PSA Network Settings restores all PSA address and name information o Printers and Printer Client Drivers restores all printer definitions and factory installed drivers plus any added to the PSA for Microsoft s Point and Print feature Nr 3 Type the full path and file name of the saved configuration in the Configuration File field Or click Browse to locate and select the file Click to begin the restore process Or Click to return to the Restore page without restoring the configurations 5 The Restore Configuration Successful window appears Click Er System Messages for Restoring the Settings on the PSA Resetting the PSA to Factory Defaults Front Panel Once the PSA is configured the configuration settings are retained in memory unless they are manually reset to factory defaults through the front panel of the PSA This procedure will reset the PSA to its factory defaults All configuration information will be lost including network settings queues and any firmware upgrades The administrator account name and password will be reset to factory defaults Note If the PSA is reset to factory defaults
235. s the network This value is updated every ten minutes or whenever Diagnostics are run l Disk Usage DNS Servers WINS Servers Lists the number of configured WNS servers that are reachable across the network This value is updated every ten minutes or whenever Diagnostics are run Microsoft Domain If Domain Mode is enabled on the PSA on the Microsoft Network Settings page this displays the name of the domain it is a member of and its status DNS Domain The DNS Domain name as typed in the DNS Domain field on the TCP IP and DNS page in the web interface under Networking IP Address The IP address for the PSA as typed on the IP Address field on the TCP IP and DNS page in the web interface under Networking Ethernet Address The PSA s IEEE Ethernet 802 3 Link Level MAC Media Access Control address Serial Number Serial number for the PSA Firmware revision number currently on the PSA Firmware revision hp print server appliance HPRSGFO__253263 DHS Domain Mane rose hmi iar 1 z 15 2947122 I4 gt DOES HF C4 All comiacted D0 0RR56F0C4 All contacted 24324 dormegi Changing the Date and Time Use the Date and Time Settings page to set the date and time of the PSA Field Name Description Day Type the day of the month numerically for example 01 or 20 Month Type the month for example 01 02 and so on Year Type the four digit year for exampl
236. s to copy from a designated place offer equivalent access to copy the above specified materials from the same place d Verify that the user has already received a copy of these materials or that you have already sent this user a copy For an executable the required form of the work that uses the Library must include any data and utility programs needed for eproducing the executable from it However as a special exception the source code distributed need not include anything that is normally distributed in either source or binary form with the major components compiler kernel and so on of the operating system on which the executable runs unless that component itself accompanies the executable It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system Such a contradiction means you cannot use both them and the Library together in an executable that you distribute 7 You may place library facilities that are a work based on the Library side by side in a single library together with other library facilities not covered by this License and distribute such a combined library provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted and provided that you do these two things a Accompany the combined library with a copy of the same work based on the Library uncombined
237. scription The IP address for the printer has been changed successfully on the printer s Properties page in the web interface under Print Services gt Print Shares gt Properties Upgraded firmware 404 Level Informational Category Administrative Description The firmware for the PSA has been upgraded successfully using the Upgrade feature in the web interface under Maintenance Deleted printer driver 405 Level Informational Category Administrative Description The printer driver was deleted successfully on the Driver Management page in the web interface under Print Services gt Driver Management Cleared log file 406 Level Informational Category Administrative Description The event log file has been cleared successfully on the Event Log page in the web interface under Maintenance Backed up settings 407 Level Informational Category Administrative Description The configuration settings for the PSA have been backed up successfully using the Backup feature in the web interface under Maintenance Failed to restore settings from backup file 408 Level Informational Category Administrative Description The configuration settings for the PSA could not be restored from the specified backup file using the Restore feature in the web interface under Maintenance Added administrator account 409 Level Informational Category Administrative Description The administrator account has been adde
238. se copy and distribute this software and its documentation for any purpose and without fee provided that the above copyright notice extant in files in this distribution is not removed from files included in any redistribution and that this copyright notice is also included in any redistribution Modifications to this software may be distributed either by distributing the modified software or by distributing patches to the original software under the following additional terms 1 The version number will be modified as follows a The first 3 components of the version number i e lt number gt lt number gt lt number gt will remain unchanged b A new component will be appended to the version number to indicate the modification level The form of this component is up to the author of the modifications 2 The author of the modifications will include his her name by appending it along with the new version number to this file and will be responsible for any wrong behavior of the modified software The author makes no representations about the suitability of this software for any purpose It is provided as is without any express or implied warranty Modifications Version 2 1 8 7 current Copyright 1998 2001 by Rob Braun Sensor Addition Version 2 1 8 9prel14a Copyright 2001 by Steve Grubb This is an exerpt from an email recieved from the original author allowing xinetd as maintained by me to use the higher version numbe
239. se or distribute the Program is void and will automatically terminate your rights under this License However parties who have received copies or rights from you under this License will not have their licenses terminated so long as such parties remain in full compliance 5 You are not required to accept this License since you have not signed it However nothing else grants you permission to modify or distribute the Program or its derivative works These actions are prohibited by law if you do not accept this License Therefore by modifying or distributing the Program or any work based on the Program you indicate your acceptance of this License to do so and all its terms and conditions for copying distributing or modifying the Program or works based on it 6 Each time you redistribute the Program or any work based on the Program the recipient automatically receives a license from the original licensor to copy distribute or modify the Program subject to these terms and conditions You may not impose any further restrictions on the recipients exercise of the rights granted herein You are not responsible for enforcing compliance by third parties to this License 7 If aS a consequence of a court judgment or allegation of patent infringement or for any other reason not limited to patent issues conditions are imposed on you whether by court order agreement or otherwise that contradict the conditions of this License they do not excuse
240. server 442 Level Informational Category Administrative Description The DNS server was deleted successfully on the TCP IP and DNS page in the web interface under Networking Failed to upgrade firmware 443 Level Informational Category Administrative Description The firmware for the PSA has not been upgraded Failed to backup settings 444 Level Informational Category Administrative Description The configuration settings for the PSA have failed to back up A backup file has not been generated Failed to restore settings from backup file 445 Level Informational Category Administrative Description The configuration settings from the backup file have not been restored Created NT domain account 446 Level Informational Category Administrative Description The NT domain account was successfully created Joined NT domain 447 Level Informational Category Administrative Description The administrator account successfully joined the NT domain Installed printer driver 500 Level Informational Category Administrative Description The printer driver was successfully installed onto the PSA Initialized printer driver 501 Level Informational Category Administrative Description The printer driver was successfully initialized on the PSA and can now be used for point and print Printer driver installation failed 502 Level Error Category Administrative Description The printer
241. sign The sources are provided for free but without warranty of any kind The library has been entirely written by J ean loup Gailly and Mark Adler it does not include third party code If you redistribute modified sources we would appreciate that you include in the file ChangeLog history information documenting your changes Copyright c 1994 1996 1998 2002 Todd C Miller lt Todd Miller courtesan com gt All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission from the author 4 Products derived from this software may not be called Sudo nor may Sudo appear in their names without specific prior written permission from the author THIS SOFTWARE IS PROVIDED AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAI MED IN NO EVENT SHALL THE
242. sion Patches Applied BIOS Version Manufacturing Date Code Serial Number Hard Drive Information Operating System Restored Data Area Restored Spool Area Restored Current version of firmware running on this PSA Version of firmware that the PSA would be rolled back to if it was reset to factory defaults Lists any patches that have been applied to the PSA Version of the BIOS on the device Manufacturing information for use by the factory Serial number of this unit Hard drive s identifier code Date and time of last restore of the operating system Date and time of last restore of the data area Date and time of last restore of the spool area TCP IP Network Configuration Information Parameter IP Configuration Mode Current IP Address Current Subnet Mask Default Gateway Description How this unit was configured manual or DHCP IP address of this PSA IP subnet mask of this PSA Default gateway of this PSA Primary Domain Name Server DNS IP address of the primary DNS server Address Secondary Domain Name Server DNS IP address of the secondary DNS server Address DNS Domain Name Name of the IP domain to which this PSA belongs Auto negotiate Network link mode enabled or disabled speed 10T or 100T and duplex full or half Microsoft Network Configuration Information Parameter Description Print Server Appliance Name Name of the PSA Windows Domain or Work
243. ss for some Windows 2000 permissions that do not map directly to the above four permission levels Action One or more of the following actions may apply e Grant the user Manage Documents or Full control through the Print Shares page in the web interface under Print Services e Monitor the log file for additional unauthorized access attempts For more information see NT Domain Security Cannot communicate with DNS server 214 Level Error Category Networking Description The DNS server specified on the Microsoft Network Settings page in the web interface under Networking experienced one of the following conditions network problems cable malfunction hub or router problems not on the network the IP address or host name specified is not a domain controller power is disconnected or interrupted Action e Retype the DNS server address in the xxx xxx xxx xxx format on Microsoft Network Settings page and try again A properly configured DNS server is essential for the proper operation of the PSA If the PSA cannot reach the DNS server users on other subnets on the other side of a router will not be able to see the PSA in Network Neighborhood e If the DNS servers WINS servers or Domain Controller are not on the same subnet as the PSA ensure that the TCP IP configurations as entered on the TCP IP and DNS page in the web interface under Networking are configured correctly and that the network infrastructure s
244. stem which is implemented by public license practices Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system it is up to the author donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License 12 If the distribution and or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries so that distribution is permitted only in or among countries not thus excluded In such case this License incorporates the limitation as if written in the body of this License 13 The Free Software Foundation may publish revised and or new versions of the Library General Public License from time to time Such new versions will be similar in spirit to the present version but may differ in detail to address new problems or concerns Each version is given a distinguishing version number If the Library specifies a version number of this License which applies to it and any later version you have the option of following the terms and conditions either of that version or of any later version pub
245. t 1999 2003 Hewlett Packard Company All rights reserved worldwide Portions of this software are also Copyright c 2000 Carnegie Mellon University Copyright c 1995 2001 The Internet Software Consortium Copyright c 2001 Python Software Foundation Copyright c 1983 Regents of the University of California Copyright c 1995 1997 The Apache Group Copyright c 1989 1991 Free Software Foundation Inc Copyright c 2000 Gregory Trubetskoy Copyright c 1998 2001 Ralf S Engelschall Copyright c 1999 2001 J ohn Coffman Copyright c 1996 2000 Julian R Seward Copyright c 1990 1993 1994 1995 1996 1997 1998 Sleepycat Software Copyright c 1995 1996 The President and Fellows of Harvard University Copyright c 1998 1999 2000 Thai Open Source Software Center Ltd and Clark Cooper Copyright c 1995 1998 Eric Young Copyright c 1998 2001 The OpenSSL Project Copyright c 1988 1997 Julianne F Haugh Copyright c 1991 1992 Paul Kranenburg Copyright c 1993 Branko Lankester Copyright c 1993 Ulrich Pegelow Copyright c 1995 1996 Michael Elizabeth Chastain Copyright c 1993 1994 1995 1996 Rick Sladkey Copyright c 1999 2000 Wichert Akkerman Copyright c 1995 by Wietse Venema Copyright c 1990 2001 Info ZIP Copyright c 1988 1990 1993 by Paul Vixie Copyright c 1992 by Panagiotis Tsirigotis Copyright c 1995 1998 J ean loup Gailly and Mark Adler Copyright c 1994 199
246. t compatible the PSA firmware 2 3 252 or older Upgrade the PSA firmware to 2 5 x and reload the 2K XP printer driver Select the option Use client side rendering Your Windows 9x driver may not have the same name in its inf file as the Windows NT 2K or XP drivers Please contact HP support Before drivers can be installed Java must be installed and J avaScript enabled in your web browser JavaScript can be enabled in Internet Explorer under Internet Options gt Security tab gt Custom Level button gt Scripting gt Scripting of Java Applets subheading If a Java virtual machine is not installed in the browser refer to Sun Microsystem s web site or to Microsoft s web site for information about downloading one Then make sure the virtual machine is turned on In Internet Explorer go to Internet Options gt Security tab gt Custom Level button gt Microsoft VM Select any option other than disable am trying to adda printer driver to the PSA but keep getting the error Unauthorized to perform this action added a Windows 2000 driver to the PSA but it did not show up in the driver list added a Windows XP driver to the PSA but it did not show up in the driver list am having problems with Windows 2K and XP drivers cannot point and print a printer driver from the PSA onto my NT client PC Special printing property options like Watermark
247. t features on the Properties Page in Network Neighborhood are supported by the PSA The PSA uses the printer configuration page on the Printer Properties window which is displayed after right clicking on a printer and then selecting Properties for driver configuration changes and recognizes some other settings such as security settings However the PSA does not recognize many of the settings if they are changed using these driver management tools o General tab a Comments text field supported a Location text field supported a Driver dropdown the driver can be changed if and only if the driver is an initialized driver otherwise the administrator will be prompted to change the driver through the PSA s web interface so that the driver can be initialized a New Driver button the driver can be uploaded to the PSA but will not be associated with this printer until the administrator uses the PSA s web interface to change the driver so that it can be initialized a Separator Page button not supported a Print Processor button not supported Print Test Page button supported o Ports tab all buttons are disabled for remote printers a Enable bi directional support check box not supported a Enable printer pooling check box not supported o Scheduling tab a Availability should be left on Always print jobs submitted during unavailable time will be deleted and not spooled a Priority scale not supported a Spool print docu
248. t jobs pending Please enter a valid path to the upgrade configuration file or click Browse to find the saved upgrade configuration file Processing the restore backup file Rebooting the device Status not available retrying The backup restore upgrade failed The backup restore upgrade is blocked The backup file has been restored successfully The backup file is ready to transfer The configuration file was successfully restored on this PSA The restart of the PSA has begun This system restart will take approximately 5 10 minutes There will not be any web notification that the system has been restarted Click at least one option and then continue the restore process Type the file name and path and retry the upgrade or restore process No upgrade file was transferred to the PSA Retype the complete path to the firmware image for example C TEMP UPGRADE HP or click Browse to find the saved firmware image Retype the file name and path and retry the upgrade process If the file name is unknown access HP s web site and download the upgrade image http www hp com cposupport Type the file name and path and retry the upgrade or restore process Self explanatory Self explanatory When attempting to restore settings or upgrade the firmware no configuration or upgrade file was specified Type the complete path to the file for example C TEMP file HP or click Browse to find the
249. t shares for both driver versions are required create a separate share for each driver type on separate PSAs This only affects NT and 2K XP printer drivers and not 9X drivers 9X drivers can still be installed along with NT or 2000 XP drivers For more information please refer to the white papers on client migration from NT to 2K XP clients http www hp com go psa_ whitepapers To initialize or reset drivers that are already installed on the PSA highlight the driver and click Initialize Client side rendering CSR is a process built into a new architecture of printer drivers for 2K and XP clients called Unidriver If the printer driver you are installing is a Unidriver and you are having problems with any if the following advanced printing features then use the CSR version of the printer driver to see if it resolves your printing problems N up printing multiple pages in a reduced format on one page booklet style format the print job into a printed booklet watermark print a watermark on each page of the document ZoomSmart scales a letter sized A4 document or poster to tabloid A3 or vice versa back to front prints the document in reverse order rotate 180 degrees rotates the document layout but not the paper To see client side rendering drivers select this option Note Print queues using the CSR driver are not compatible with NT clients hp print server appliance Driver Management Sera orale piri G
250. terms and conditions You may not impose any further restrictions on the recipients exercise of the rights granted herein You are not responsible for enforcing compliance by third parties to this License 11 If as a consequence of a court judgment or allegation of patent infringement or for any other reason not limited to patent issues conditions are imposed on you whether by court order agreement or otherwise that contradict the conditions of this License they do not excuse you from the conditions of this License If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations then as a consequence you may not distribute the Library at all For example if a patent license would not permit royalty free redistribution of the Library by all those who receive copies directly or indirectly through you then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library If any portion of this section is held invalid or unenforceable under any particular circumstance the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims this section has the sole purpose of protecting the integrity of the free software distribution sy
251. th is no longer available the PSA will attempt to find another domain controller from the following e the WINS server e broadcasting on the local subnet e the DNS server If the DNS server WINS server or Domain Controller is not on the same subnet as the PSA ensure that the TCP IP configurations as entered on the TCP IP and DNS page in the web interface under Networking are configured correctly and that the network infrastructure such as the default gateway is configured and is operational Cannot communicate with any domain controllers 201 Level Critical Error Category Security Description The PSA was unable to communicate with a Primary Domain Controller PDC or a Backup Domain Controller BDC if one is set up to verify the user s name and password This means that clients will not be allowed to print because a Domain Controller was not available to verify the user s name and password Action e Check your WINS server domain controllers routers and other network infrastructure to verify proper set up and operation Are they plugged in and turned on e If you specified automatic discovery of the domain controllers on the Microsoft Network Settings page in the web interface under Networking try changing to a list of specific domain controllers on that same page e If the DNS server WINS server or Domain Controller is not on the same subnet as the PSA ensure that the TCP IP configurations as entered on the T
252. the above limitation or exclusion might not apply to you This warranty gives you specific legal rights and you might also have other rights that vary from country to country state to state or province to province HP will be liable for damage to tangible property per incident up to the greater of 300 000 or the actual amount paid for the product that is the subject of the claim and for damages for bodily injury or death to the extent that all such damages are determined by a court of competent jurisdiction to have been directly caused by a defective HP product TO THE EXTENT ALLOWED BY LOCAL LAW THE REMEDIES IN THIS WARRANTY STATEMENT ARE YOUR SOLE AND EXCLUSIVE REMEDIES EXCEPT AS INDICATED ABOVE IN NO EVENT WILL HP OR ITS SUPPLIERS BE LIABLE FOR LOSS OF DATA OR FOR DIRECT SPECIAL INCIDENTAL CONSEQUENTIAL INCLUDING LOST PROFIT OR DATA OR OTHER DAMAGE WHETHER BASED IN CONTRACT TORT OR OTHERWISE Some countries states or provinces do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you THE WARRANTY TERMS CONTAINED IN THIS STATEMENT EXCEPT TO THE EXTENT LAWFULLY PERMITTED DO NOT EXCLUDE RESTRICT OR MODIFY AND ARE IN ADDITION TO THE MANDATORY STATUTORY RIGHTS APPLICABLE TO THE SALE OF THIS PRODUCT TO YOU HP Software License The following License Terms govern your use of the Software which is embedded in firmware or accompanies this product u
253. the appliance Hewlett Packard recommends using two screws per bracket Now the cables should be connected Cable Connections Use the following steps to connect the cables WN 1 DB 9 Serial Port supports all APC uninterruptible power supplies with a Simple Signaling cable APC part 940 0020B 2 RJ 45 Network J ack 3 Power Receptacle Connect a twisted pair network cable not included with an RJ 45 connector to the RJ 45 jack on the back of the appliance see Figure 1 number 2 Connect the other end of the network cable to a network port If using an APC uninterruptible power supply UPS connect a Simple Signaling cable from the UPS to the DB 9 serial port on the back of the appliance Note The Simple Signaling cable is not included with the appliance or with the APC UPS This cable can be ordered from APC APC part 940 0020B Connect the power cable to the power receptacle on the back of the appliance Note Make certain that air flow is not restricted around the back of the unit Connect the other end of the power cable to a power source If a UPS is being used connect the power cable to the UPS 6 Turn on the appliance by pressing the Power button on the front panel For initial installation the IP address for the appliance can now be configured Refer back to the Getting Started procedures or refer directly to information about configuring IP addresses TCP IP and DNS Settings
254. then send their print job s and then disconnect Across a large population it is possible although unlikely that a sufficiently large number of clients might choose to print at the same time Another situation that can use up available connections occurs when clients open the printer window in order to view their print jobs Leaving the printer window open will hold the connection open even after the jobs have been printed Action e Ifa large number of clients frequently print at the same time it might be necessary to redistribute some clients onto another PSA e Clients should be encouraged to close the printer window when it is no longer showing their jobs Cannot communicate with the printer 300 Level Error Category Networking Description Communications between the PSA and the printer were interrupted while the PSA was sending a print job to the printer This could be due to a potential printer problem Action e Make sure the printer is plugged in and turned on e Make sure the IP address entered is the correct IP address for the printer e Check the cables for the PSA and the printer to make sure they are connected and secure Failed DNS name resolution 301 Level Error Category Networking Description e The IP address and host name of the printer were incorrect see the TCP IP and DNS page in the web interface under Networking e The DNS server configuration was incorrect Action One or more of the following ma
255. time so that the corresponding NT version of the driver can be properly initialized An XP 2K driver that is in use has been selected for deletion You should cancel the delete operation if you do not have appropriate priveleges Then log back in as an appropriate user and delete the driver Or you can proceed with this delete and then log back in as an appropriate user later and initialize the driver using the Initialize button An in use driver capable of client side rendering is selected for deletion Before if can be deleted any queues using this driver must be deleted or pointed to a different driver including the non client side rendering version of this driver by unchecking the client side rendering box Explanation Remedy Retype the date in mm dd yyyy format Retype the time in hh mm ss format The date and or time fields may only contain numbers and the specified separator characters Retype the date and or time using the correct format and characters The necessary information to set the date and time was not found The date and or time fields are blank Your date and time settings have been applied TCP IP and DNS Settings Page Message DNS server IP address cannot be contacted Gateway is not a valid gateway for IP address IP address and subnet mask subnet mask Invalid DNS Server Address The DNS server address address must be in the format XXX XXX XXX XXX Invalid Domain Name The DNS Domain Name
256. tion Organizational Unit Validity Period Cipher Value Locality City State Province Country LPD Configuration Information Parameter LPD Printing Mode Specified LPD Hosts Print Shares I nformation This section consists of two lines Description Type of certificate installed Self Signed or CA signed Status of certificate Installed or Pending Fully qualified domain name or IP Address of the PSA Used to identify the device HPX595 rose hp com Full legal name of your company Specific department or division within your organization Length of time in days for validity of the certificate Cipher value of the certificate Low Medium or High City in which your organization is physically located State or province up to 68 characters Two character ISO country code Description Status of LPD printing checked is enabled or on List of host names permitted to print and manage print jobs using LPD e The first line lists the printer name the IP address or hostname the remote queue name drivers the share will point and print any printer properties for example Paused Print Banner or Hide and any share description text Note The suffix CSR means that driver is capable of client side rendering When the driver was added and initialized CSR capability was requested to resolve issues with W2K drivers Problems resolved with a CSR driver include O oO 0 0 0 0 N up p
257. tions A password will prevent unauthorized configuration changes After the front panel password is set it must be entered before future configuration tasks can be performed at the front panel display To set or change the front panel password press ai once The following messages are displayed IP Config Press to begin Press y to begin ai a Password Type a new password and press ai oe Password Retype the new password and press Password zet The front panel displays this message briefly Change Password Press x to end the operation and the device will return to the display of Press y to begi a v n normal operating messages Or after a moment it will display normal operating messages Hardware Installation Links within this document Desktop Rack Shelf Under Printer Installation Rackmount Installation Cable Connections Troubleshooting the Appliance Links to related documents Troubleshooting the Appliance This document explains how to connect the components of the appliance When installing the hardware for the appliance be certain to carefully follow all instructions to ensure the proper connection and function of the appliance Desktop Rack Shelf Under Printer I nstallation Use the following procedure to perform the desktop rack shelf under printer installation CAUTI ON For under printer installation the appliance can support printers
258. to a domain Complete the fields on the Microsoft Network Settings page Type the PSA name and then ata minimum select the box for Create account for this device in the domain and complete Domain Administrator Name and Domain Administrator Password OR Create a machine account on the domain controller using Server Manager A machine account must be created before the PSA can join the specified domain Note This method must be used if a WINS Server was not specified on the Microsoft Network Settings page 1 Log on to the server as an administrator 2 Add the PSA to the domain using the Server Manager 3 Log on to the PSA as PSA Administrator using the PSA s web interface The default user name is admin and the default password is admin 4 Set the domain name on the Microsoft Network Settings page by completing the Windows Domain or Workgroup field 5 Enable Domain Authentication by checking the box Enable Domain Authentication 6 Click kk Enabling and Disabling Microsoft Domain Security The administrator can at any time turn on or off domain security If domain security is on and the PSA cannot communicate with the domain controller over the network users will not be able to print using the PSA The administrator can turn off domain security which would enable users to continue printing although no security will be enforced To disable domain security access the Microsoft Network Settings page and make sure
259. tomatically so that only those messages of a certain type and or level No per are displayed Clic to display the Event Log Filters page hp print server appliance Event Log Filters Select the event levels and pet you wani ig vie Levels Types E critical CRIT PF Security SEC E Eror ERR F Natworking MET PF niamiatonal MFC fF Administrative ADM The following filters can be selected for events One or more Type filters and one or more Level filters must be selected Levels at least one must be selected e CRIT Critical error an error that affects the basic funtions of multiple users and or administrators For example users cannot print or administrators cannot perform administrative functions Typically caused by a complete failure of a network component e ERR Error an error that affects the functions of only one or more users or administrators but not all The majority of users or administrators can still perform their functions e INFO Informational an important system event For example a new driver has been added Events that occur more often such as completing a print job are not included Types at least one must be selected e SEC Security displays all Security related messages e NET Networking displays all Networking related messages e ADM Administrative displays all Administrative related messages Initiated standard shutdown 102 Level Informational Category
260. ton not supported o Print Processor button not supported o Print Test Page button supported e Ports tab all buttons are disabled for remote printers o Enable bi directional support check box not supported o Enable printer pooling check box not supported e Scheduling tab o Availability should be left on Always print jobs submitted during unavailable time will be deleted and not spooled o Priority scale not supported o Spool print document so program finishes printing faster toggle supported o Print directly to the printer toggle supported o Hold mismatched documents check box not supported o Print spooled documents first check box not supported the PSA always uses this behavior o Keep documents after they have printed check box not supported e Sharing tab o Not Shared toggle not supported may be selected but will be ignored o Shared toggle supported o Share Name text field not supported o Alternate Drivers not supported e Security tab o Permissions button supported o Auditing button not supported o Ownership button not supported 10 1 1 a a ee a keep getting prompted for a password when I use a web browser to access the PSA even though the PSA is a member of a domain want to use a hyphen in the beginning of some of my PSA names so that they will print first in a list of PSAs have a Windows 2000 environment and am trying to integrate my PSAs into it have a
261. try the downgrade process Informational Verify the file is a valid PSA file and reboot the PSA Then retry the upgrade or restore process Verify file is a valid PSA file and then retry the restore process Verify the file is a valid PSA file and then retry the restore process Verify the file is a valid PSA file and then retry the upgrade or restore process Reboot the PSA and then retry the backup process Verify the the file is a valid PSA file Then reboot the PSA and retry the restore process Verify the file is a valid PSA file and then retry the process Retype the file name and retry the restore process Retry the backup process No upgrade file was transferred to the PSA Retype the complete path to the firmware image for example C TEMP UPGRADE HP or click Browse to find the saved firmware image http www hp com cposupport Retype the file name and path and then retry the upgrade process If the file name is unknown access HP s web site and download the upgrade image http www hp com cposupport No restore items were selected Please select at least one item No upgrade backup file was provided with the upgrade restore request No upgrade file was provided with the upgrade request No upgrade is in progress Not enough disk space Try again when there are fewer print jobs pending Not enough disk space for a restore file Try again when there are fewer prin
262. uch as the default gateway is configured and is operational Cannot communicate with any WINS servers 215 Level Critical Error Category Networking Description The WINS servers specified on the Microsoft Network Settings page in the web interface under Networking experienced one of the following conditions network problems cable malfunction hub or router problems not on the network the IP address or host name specified is not a domain controller power is disconnected or interrupted Action e Retype the WINS servers addresses in the xxx xxx xxx xxx format on Microsoft Network Settings page and try again Properly configured WINS servers are essential for the proper operation of the PSA If the PSA cannot reach the WINS servers users on other subnets on the other side of a router will not be able to see the PSA in Network Neighborhood e If the DNS servers WINS servers or Domain Controller are not on the same subnet as the PSA ensure that the TCP IP configurations as entered on the TCP IP and DNS page in the web interface under Networking are configured correctly and that the network infrastructure such as the default gateway is configured and is operational Cannot communicate with any DNS servers 216 Level Critical Error Category Networking Description The DNS servers specified on the Microsoft Network Settings page in the web interface under Networking experienced one of the following conditions
263. umentation Software with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain copyright statements and notices 2 Redistributions in binary form must reproduce applicable copyright statements and notices this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 Redistributions must contain a verbatim copy of this document 4 The names and trademarks of the authors and copyright holders must not be used in advertising or otherwise to promote the sale use or other dealing in this Software without specific written prior permission 5 Due credit should be given to the authors of the Software 6 The OpenLDAP Foundation may revise this license from time to time Each revision is distinguished by a version number You may use the Software under terms of this license revision or under the terms of any subsequent revision of the license THIS SOFTWARE IS PROVIDED BY THE OPENLDAP FOUNDATION AND CONTRIBUTORS AS IS AND ANY EXPRESSED OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE OPENLDAP FOUNDATION ITS CONTRIBUTORS OR THE AUTHOR S OR OWNER S OF THE SOFTWARE BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT
264. unts can be added to the PSA LPD Links within this page gt LPD Printing gt Configuring LPD Printing Links to related pages System Messages for LPD Printing Troubleshooting the PSA Configuring Printing for UNIX Clients This feature enables the Line Printer Daemon LPD protocol sometimes referred to as BSD compatible network printing to spool and control print jobs on the PSA from any RFC 1179 compliant LPD client including e HP UX 10 x and above e Solaris e Linux e AIX 4 3 and above Note Not all LPD implementations are RFC 1179 compliant LPD print jobs are visible to Windows clients but Windows users cannot manage pause resume restart or cancel them unless that user has the appropriate administrative rights on the PSA Both UNIX and Windows clients can simultaneously print to the same printer regardless of whether a printer driver has been associated with the printer As a default LPD printing is enabled for all hosts Administrators can restrict printing to a certain set of hosts if desired Note The PSA does not process control files for printing options such as number of copies Instead it will pass this information straight through to the target device and the target device may choose to handle or ignore these options LPD Printing On the LPD Settings page the administrator can enable or disable LPD printing LPD Settings Page Field Name Description Disable LPD printi
265. vent log the following trap will be sent O O O O O Q logEventCriticalAlert notification received Community public Bindings 6 1 sysUpTime 0 0 days 00h 00m 32s 52th 2 snmpTrapOlD O0 logEventCriticalAlert amp nbsp 3 logCriticalCategory administrative 3 4 logCriticallD 110 5 logCriticalMessageNumeric NULL 6 logCriticalMessageString Critically high disk utilization disk utilization is at 90 100 of capacity SNMPv3 The SNMPv3 RFCs do not specify a mechanism for creating the initial SNMPv3 account The initial account creation is left to the developer Users can create the initial account and add it to the PSA using one of two methods using the web interface covered in this document or using SNMP intended for use by other applications and not covered in this document SNMPv3 security relies upon the creation of two separate keys one for encryption and the other for authentication The keys are hex strings To make hex strings easy to remember two different algorithms for turning passwords into keys were defined for use HMAC MD5 96 and HMAC SHA 96 Once the key is generated from the passwords the key can be localized to a specific SNMP agent by combining the key with the SNMP agent s engine ID and then by running a hashing algorithm on the combined pair The following flowchart illustrates this Users Password My Password Hashing Algorithm SampEnginelD Ox 800007 ested 2M3eleYaatad Non local
266. ver will require initialization of the NT driver which requires you to have administrative priveleges both on this PC and on the PSA You attempted to delete the following active CSR driver s To delete an active CSR driver you must either turn off Client Side Rendering on the print shares that use it point those shares to a different driver or delete those shares entirely Date Time Page Message Invalid Date The date must be in mm dd yyyy format Invalid Time The time must be entered in the format hh mm ss Invalid Time Date The date and or time fields contain non numeric character s One or more drivers were selected and was pressed Confirm removal or cancel the operation The HP Laser et 4 printer driver is a default driver and cannot be deleted You attempted to delete the listed active driver s To delete an active driver you must either delete the print shares that use it bind those print shares to a different printer driver or the driver you are deleting must be an NT or 2K XP driver where another non 9x version of that driver still exists on the PSA An attempt was made to add a driver to the PSA from an unsupported platform A combination of the specified operating systems and browsers is needed in order to run the driver initialization functionality needed to install a new driver on the PSA More than one active driver is selected for deletion Active drivers must be deleted one at a
267. vision version 69 Copyright C 19yy name of author Gnomovision comes with ABSOLUTELY NO WARRANTY for details type show w This is free software and you are welcome to redistribute it under certain conditions type show c for details The hypothetical commands show w and show c should show the appropriate parts of the General Public License Of course the commands you use may be called something other than show w and show c they could even be mouse clicks or menu items whatever suits your program You should also get your employer if you work as a programmer or your school if any to sign a copyright disclaimer for the program if necessary Here is a sample alter the names Yoyodyne Inc hereby disclaims all copyright interest in the program Gnomovision which makes passes at compilers written by James Hacker lt signature of Ty Coon gt 1 April 1989 Ty Coon President of Vice This General Public License does not permit incorporating your program into proprietary programs If your program is a Subroutine library you may consider it more useful to permit linking proprietary applications with the library If this is what you want to do use the GNU Library General Public License instead of this License GNU LIBRARY GENERAL PUBLIC LICENSE Version 2 June 1991 Copyright C 1991 Free Software Foundation Inc 59 Temple Place Suite 330 Boston MA 02111 1307 USA Everyone is permitted to copy and distri
268. w or change their local intranet settings in the Internet Options page under the Security tab by selecting Local Intranet and clicking on the Sites button Note The single sign on feature of the PSA only works with Microsoft s Internet Explorer Printing Problems Num Condition Possible Cause Solution 1 can t print from a client e The selected printer may be paused Unpause the printer to the intended printer e Wait a moment and then resend the print job which should then although have done so be printed successfully previously e Go to the Printers Management Page and see if any print queues have an inordinate number of jobs waiting to be printed If the jobs do not seem to be printing delete a few and try sending a new job e If NT Domain Security is enabled the security settings may have changed Verify that the user has authority to print This can be done from the PSA s web interface by selecting Print Shares gt Security By default the group Everyone has permission to print If Everyone does not have permission to print add it e The PSA may be unable to communicate with a domain controller in order to verify the clients ID and password Check the Domain Membership Status field on the Microsoft Network Settings page to verify that the PSA can communicate with the domain controller have not been able to print from any client to the intended printer The printer s Property pa
269. web interface if desired Access the web interface Complete the TCP IP and DNS Settings page on the menu under Networking Complete the Microsoft Network Settings page on the menu under Networking to identify the WINS server address and the Windows NT domain or workgroup For NT Domain security complete the other fields on this page Install printers on clients Back up the settings Be sure to register the PSA http www hp com go printappliance_registration Installing Printers on Clients Links within this document Installing Printers on Microsoft Clients the Microsoft Point and Print feature Bypassing Point and Print Configuring Printing for UNIX Clients Links to related documents Troubleshooting the Appliance Installing printers on each client computer is required in order for clients to be able to print using the PSA Note Hewlett Packard recommends verifying installation with one client computer before configuring more clients This will confirm operation It is easier to troubleshoot settings on one client computer than on many Installing Printers on Microsoft Clients the Microsoft Point and Print feature Use one of the following procedures to install printers on each client computer this feature is only supported on an x86 PC running Microsoft Windows 9x ME NT 2K or XP Before you begin check the following e The PSA is installed on the network and properly configured
270. when not joined to the domain than when it is be sure that the print server has the most current firmware use the link above If it is possible to use the PSA when it is not joined to a domain do so temporarily then contact HP support e Check the PSA s Microsoft Network Settings page under Networking in the PSA s web interface If the PSA is configured to use a WINS Server Address make sure that address is correct If it is type the following command at the command prompt of a Windows NT or Windows 2000 computer nbtstat a PSA_ hostname where PSA_ hostname is the host name of your PSA The response should include three to five entries If the response is a host not found message there may be a problem with the WINS server Contact your network administrator for this problem 12 Jobs are getting stuck on The PSA uses LPD to send print jobs to its printers If the print server the PSA for one of my connecting a printer to the network does not support LPD jobs for that printers printer will get stuck on the PSA You may need to upgrade the firmware of the offending print server or it may need to be replaced with a print server that supports LPD HP Laser et print jobs are missing text of graphics or are printing garbage The Xerox Document Center 265ST fails to print from the PSA Print jobs hang in the queue I m unable to see any advanced printing options in the Print Preferences pages on 2K or XP clients
271. wse list The administrator must change the workgroup name through the Web interface on the PSA To choose another workgroup name for the PSA 1 Access the PSA s web interface by typing the IP address in a Supported browser window 2 Click Microsoft Network Settings page under Networking in the PSA s web interface 3 In the window labeled Windows NT Domain or Workgroup change the name to the correct workgroup name 4 Click K e A less common cause is that the Master Browser list Network Neighborhood has not yet been updated with the new PSA Depending on the size and speed of the network it may take up to 30 minutes before the network s master browser list gets updated e Once this browser list gets updated on the PC that s hosting this list other PCs on the network will check the browser list and be able to see any new devices on the network via Network Neighborhood To find the PSA more quickly 1 Select Start Find then Computer 2 Type the IP address of the PSA then click Find Now e Incorrect printer IP address or DNS name Verify or correct the IP address e Duplicate PSA IP address Verify or correct the IP address e Printer is offline or not present on the network Verify network connectivity by pinging the printer and then place the printer online A browser that is not supported or has known limitations may be in the problem Check the supported web browsers to see if the browser is supported T
272. y HP recommends two workarounds Install and distribute only NT printer drivers on the PSA for all of the NT 2K and XP clients or If print shares for both driver versions are required create a separate share for each driver type on separate PSAs This only affects NT and 2K XP printer drivers and not 9X drivers 9X drivers can still be installed along with NT or 2000 XP drivers Nr For more information please refer to the white papers on client migration from NT to 2K XP clients http www hp com go psa_whitepapers Security Warning When Adding New Drivers In order to add new printer drivers to the PSA either through the Add Print Share wizard or through the Driver Management page executable files must be copied through the web browser onto the client PC The following security warning is displayed and must be accepted for these executable files to be downloaded These files will be used to initialize printer drivers which is an integral part of adding printer drivers to the PSA If you choose not to accept this security warning you will not be able to add printer drivers Configuring the Administrator Account Links within this page Administrator Accounts Local Administrator Accounts Adding a Local Administrator Account Deleting a Local Administrator Account Changing the Password for an Existing Local Administrator Account Domain Administrator Accounts Adding a Domain Administrator Account Single Sign on
273. y apply e Use the IP address rather than the host name e Check the IP address and host name of the printer on the printer s Properties page in the web interface under Print Services gt Print Shares e Check the DNS Address and DNS Domain Name on the TCP IP and DNS page in the web interface under Networking Note that only alphanumeric characters with no spaces are allowed Dashes and periods are also accepted e Verify that the domain controllers WINS servers and printers have valid DNS entries Failure to resolve DNS names can cause the PSA to not function properly For example if the PSA cannot resolve the Domain Controller s name to an IP address it cannot authenticate users You should verify that the domain controllers WINS servers and printers all have valid DNS entries A valid DNS entry requires an entry in both the forward and reverse lookup tables on the DNS server to enable the resolution from the DNS Domain Name printers my com or from the IP address Permission denied host not allowed print access to printer 302 Level Error Category Security Description The client computer sending the print job was not allowed to make LPD connections to the printer Action One or more of the following actions may apply e On the LPD Printing page in the web interface under Networking add that host s IP address or DNS Domain Name to the list of allowed hosts e Monitor the log file for additional unaut
274. you from the conditions of this License If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations then as a consequence you may not distribute the Program at all For example if a patent license would not permit royalty free redistribution of the Program by all those who receive copies directly or indirectly through you then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program If any portion of this section is held invalid or unenforceable under any particular circumstance the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system it is up to the author donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License 8
275. ype Lists possible access rights that can be assigned to users and or groups Highlight the desired access level and it will be applied to any accounts added when clicking 7 mAh Valid access types are Print print pause and delete your own print jobs Manage Documents print pause and delete other user s print jobs Full Control print pause and delete other user s print jobs delete print shares and change security settings using native NT tools No Access the user will be denied access even if permitted access under another entry Special Access for some Windows 2000 and XP permissions that do not map directly to the above four permission levels Current Accounts in List Lists all groups and or users with their access rights hp print server appliance 2275 Share Security Aocound s to Add bo List Current Accounts in List Select Access Type D Type accord manne Everyone Print Primi e g DomainAccouninamel add Select acti rome Domain choose a damain remove Domain Mambers Eve recone Auth ne itid srs CED GD GD Printer Driver Management Links within this page Driver Name Mismatch _ Security Warning When Adding New Drivers Links to related pages System Messages for Driver Management Printer drivers are factory installed or they might already be loaded from a previously added printer All printer drivers added to the PSA are displayed on the Driv

HP LaserJet 4250 User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents