Hoover Wet/Dry Vac User's Manual
Contents
1. Place float ball over round opening in bottom of tank Snap tabs A on float cage into slots B on tank Once in place do not remove the float assembly NOTE Do not attempt to remove the large filter cage or float ball on cleaner lid They are not removable parts rm US a Carton contents Remove parts from tank and identify the following A Outer tank B Inner tank C Cleaner lid and portable blower D Caster supports 4 E Casters 4 F Caster support screws 4 G Reusable cartridge filter assembled to cleaner lid H Small foam filter assembled to inner tank I 1 1 4 inch tool set includes hose 2 extension wands wet dry nozzle squeegee insert utility nozzle and crevice tool J 2 1 2 inch tool set includes hose 2 extension wands blower nozzle and utility nozzle K Small float ball L Small float cage M Tool rack KE YN Insert inner tank With inner tank duct toward drain side of outer tank align tab C on inner tank with slot D in outer tank slide inner tank into place Attach cleaner lid Rotate lid latches E outward With wet dry selector F toward drain side of tank align ribs G on front of tank with slots H on either side of hose inlets place lid on tank Rotate latches inward to lock lid in place Note For convenience in attaching and removing the lid finger holds are provided Cy ML Press squeege2. automatic shut off mechanism will shut off cleaner pick up When this happens the motor sound will become noticeably higher in pitch Turn cleaner off and empty tank to continue use The automatic shut off will also engage if the cleaner has been tipped over To continue use turn cleaner off and set it upright Wait a few seconds to allow the motor to come to a complete stop The automatic shut off will function for both separate wet dry tank and single tank operation Drywall dust For best results when picking up dry wall dust slide wet dry selector A to expose WET TANK INLET B and make sure no water or moisture is in the tank outer tank Keep inner tank in position Insert hose into WET TANK INLET and attach desired tool to hose end Removing blower Rotate blower latches A to release blower Lift blower off lid B NOTE Do not use blower handle to lift or carry assembled cleaner while blower is attached to cleaner lid Portable blower The blower can be used to blow dirt out of areas where it is impossible for suction to reach Disconnect cleaner from electrical outlet Inside of wand and tools must be free of litter before operating blower Attaching tools to blower Attach a 2 1 2 inch wand and blower nozzle Plug cord into a properly grounded outlet and turn blower on To reposition blower disconnect blower from electrical outlet Remove wand position blower on to
3. cleaner without filters in place Filters are available at your Hoover Factory Service Center Authorized Hoover Warranty Dealer Depot on the enclosed order form or by writing to The Hoover Company North Canton Ohio 44720 To assure that your cleaner operates at peak performance it is imperative that you use only genuine HOOVER filters distributed by The Hoover Company HOOVER filters can be identified by these trademarks HOOVER 2 Lubrication The motor is equipped with bearings which contain sufficient lubrication for the life of the motor The addition of lubricant could cause damage Do not add lubricant to motor bearings If you have a problem If a minor problem occurs it usually can be solved quite easily when the cause is found by using the checklist below Problem Cleaner won t run Possible Cause Possible Solution Not firmly plugged in Plug cleaner in firmly No voltage in wall plug Check fuse or breaker Blown fuse tripped breaker e Replace fuse reset breaker Problem Loss of air suction Possible Cause Possible Solution Clear obstruction Clogged cartridge or foam filter Clean filter as described in Maintenance section Hole split in hose Inspect and replace hose Automatic shut off engaged See Automatic wet shut off section Obsiruction in hose wand or tool Service To obtain approved HOOVER service and genuine HOOVER part
4. grounding provides a path of least resistance for electrical current to reduce the risk of electric shock This appliance is equipped with a cord having an equipment grounding conductor C and grounding plug A The plug must be plugged into an appropriate outlet B that is properly installed and grounded in accordance with all local codes and ordinances Questions or Concerns The Hoover Company wants to quickly resolve any concerns about your cleaner or questions regarding its use Look on the list provided with the product for your local Hoover Factory Service Center or in the Yellow Pages under Vacuum Cleaners Household for the nearest Authorized Hoover Warranty Service Dealer Depot or call 1 800 944 9200 for an automated referral of authorized service outlet locations U S only OR 1 330 499 9499 to speak with a representative in the Hoover Consumer Response Center PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE OR SEND IT TO NORTH CANTON FOR SERVICE DANGER Improper connection of the equipment grounding conductor can result in the risk of electric shock Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded Do not modify the plug provided with the appliance if it will not fit the outlet have a proper outlet installed by a qualified electrician This appliance is for use on a nominal 120 volt circuit and has a grounding
5. loosen connection See How to use section for proper inlet selection The wands and tools attach to hose in the same manner For convenience additional tools store on tool rack when not in use 24 2 1 2 inch hose 25 2 1 2 inch wands 26 2 1 2 inch utility nozzle 27 Blower nozzle Extension cord instructions Use an outdoor grounding type SJT extension cord of 16 gauge up to 35 feet or 14 gauge any length The extension cord must employ a 3 prong grounding type plug and a 3 pole receptacle that accepts the machine plug Dry pick up Disconnect cleaner from electrical outlet With hose removed from cleaner slide wet dry selector A to expose Dry tank inlet B Selector will snap into place Insert hose into Dry tank inlet Attach the desired tool to hose end Make sure cleaner lid is locked in place Plug power cord into a properly grounded outlet and turn cleaner ON Adapter Included with some models To use smaller diameter tools with the 21 2 inch diameter hose attach the adapter A to hose Attach tool to adapter Twist adapter and tool to tighten or loosen connection Wet pick up Disconnect cleaner from electrical outlet With hose removed from cleaner slide wet dry selector A to expose Wet tank inlet C Selector will snap into place Insert hose into Wet tank inlet Attach desired tool
6. plug that looks like the plug illustrated in Sketch A A temporary adapter D may be used to connect this plug to a 2 pole receptacle G if a properly grounded outlet is not available The temporary adapter should be used only until a properly grounded outlet B can be installed by a qualified electrician The green colored rigid ear E lug or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover Whenever the adapter is used it must be held in place by a metal screw F NOTE In Canada the use of a temporary adapter is not permitted by the Canadian Electrical Code Attach caster supports and casters Remove cleaner lid and inner tank Turn outer tank upside down Match letters A or B on bottom of caster supports with letters on cleaner tank Then align square tabs 1 on supports with rails 2 on tank Slide tabs onto rails until caster support 3 snaps in place Insert Support screw into hole nearest tank Tighten screw with a Phillips screwdriver Insert caster stem into hole on bottom of caster support Press firmly until caster snaps into place Repeat with remaining casters and Screws Turn cleaner tank right side up 4 Attach small float cage Turn inner tank upside down
7. HOOVER Wet Dry Vac with Portable Blower and Exclusive two tank system Owner s Manual je Filter Read these instructions before operating cleaner Thank you for selecting a HOOVER product This cleaner was inspected and packaged carefully before being shipped from the factory If you should happen to need assistance during assembly or operation call 1 800 944 9200 for an automated Record and retain The HOOVER cleaner you have purchased is designed for both wet and dry pick up and also has a portable blower The model and serial number are located on the portable blower For your personal records please enter the COMPLETE model and serial numbers in the spaces provided and retain this information Model number Serial number It is suggested that you attach your sales receipt to this owner s manual Verification of date of purchase may be required for warranty service of your Hoover product Important Safeguards When using an electrical appliance always follow basic precautions including the following READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE referral of authorized service outlet locations U S only 7 Warnin Li g m To reduce the risk of fire electric shock or injury Do not expose to rain store indoors only Connect to a properly grounded outlet only See Grounding Instructions Wear eye protection when operating portable blower Close supervision is necessary when
8. any appliance is used by or near children Do not allow vacuum cleaner to be used as a toy or to run unattended at any time Keep hair loose clothing fingers feet and all parts of body away from openings or other moving parts Do not pick up anything that is burning or smoking such as cigarettes matches or hot ashes Do not use to pick up flammable or combustible liquids such as gasoline or use in areas where they may be present 1 330 499 9499 to speak with a representative in our Consumer Response Center PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE Index Assembly rr 4 5 Do not vacuum or use blower near toxic or health endangering materials Cleaner Description 5 such as asbestos pesticides fertilizers or anything that is poisonous Do not vacuum explosive dusts or use cleaner or blower in areas that may How to Use contain explosive substances such as coal grain or any other fine Automatic Wet Shut Off 6 combustible material Extension cord 6 Pn picking D sharp objects with the cleaner They may damage the cleaner and the filter ele d t Ee k ROM 5 ji Do not use without filters in place Clean filters frequently when picking eparate WEU ary tanR Sissis j up very fine materials such as powder Single Tank oce 6 Use extra care when cleaning on stairs If you have a problem 9 Do not put any object into openings Do n
9. e insert firmly into wet dry nozzle opening Use squeegee for wet pick up only Additional tools and accessories that are not included with your model are available at additional cost from your local Hoover Factory Service Center Authorized Hoover Warranty Dealer by using the enclosed order form or through The Hoover Company online at www hoovercompany com Attach Drain cap Screw drain cap onto lower front of tank as shown Slide the three tabs I on tool rack into slots J on back of cleaner lid To help locate the tool rack guide lines have been added to tank lid Snap tool rack into place The assembled cleaner will look like the drawing Operate cleaner only at voltage specified on data plate on cleaner lid This cleaner is intended for household use Cleaner Description 1 Portable blower 2 Blower latches 3 Cleaner lid 4 Hose inlets 5 Hose 6 Wet dry selector 7 Caster supports 8 Casters 9 Tank drain cap 10 Cleaner tank 11 Wand storage holders 12 Wands 2 1 2 inch wands fit over 11 4 inch wands 13 Carrying handles 14 Cleaner lid latches 15 ON OFF switch 16 Tool storage rack 17 Cord hook loop cord over hook for storage 18 11 4 inch wands 19 11 4 inch hose 20 Crevice tool 21 11 4 inch utility nozzle 22 Wet dry nozzle 23 Squeegee insert Attach hose wands and cleaning tool Push hose into hose inlet on tank twist hose to tighten or
10. ge Foam filter Disconnect cleaner from electrical outlet To clean remove foam filter B and rinse with clean water Let filter air dry To replace slide filter completely down over openings on inner tank filter cage C If the cleaner is used as a single tank unit for wet pick up it is best to use a HOOVER foam filter sleeve available at additional cost instead of the cartridge filter After wet pick up Unscrew drain cap A from bottom of outer tank Empty contents into a suitable drain As the liquid level decreases it may be necessary to tip cleaner to allow remaining liquid to drain out Rinse inside of tank thoroughly with clean water particularly if spills or other substances other than water have been picked up Wipe inside of tank dry Reusable cartridge filter Disconnect cleaner from electrical outlet After dry pick up remove filter D and gently tap it against inside of cleaner tank or brush off debris with a soft brush After wet pick up allow filter to dry and gently brush with a soft brush Check filter thoroughly and replace it if there are any tears or holes in it If extremely dirty the cartridge filter can also be rinsed occasionally with tap water NOTE Vigorous scrubbing or frequent rinsing may shorten the life of the cartridge filter To replace slide cartridge filter over filter cage E until it will not go on any further Filters Do not operate
11. ot use with any opening Important Safeguards 2 blocked keep free of dust lint hair or anything that may reduce air flow Maintenance Do not pull or carry by cord use cord as a handle close door on cord or Authorized ServiGe cos 9 pull cord around sharp edges or corners Do not run appliance over cord i Keep cord away from heated surfaces Emptying tank 8 Always disconnect cord from electrical outlet before servicing the cleaner Filters o errrecein nene 8 Unplug cleaner when not in use Turn off all controls before unplugging Lubrication enne 8 Do not unplug by pulling on cord To unplug grasp the plug not the cord Storage iere T 7 Never handle plug or appliance with wet hands If needed connect to a suitable extension cord See Extension cord instructions Do not use with damaged cord or plug If appliance is not working as it should has been dropped damaged left out doors or dropped into water take it to a Hoover Factory Service Center or Authorized Hoover Warranty Service Dealer Depot Use vacuum cleaner only for its intended use as described in the instructions Use only attachments recommended by The Hoover Company others may cause hazards UL Save these instructions 1993 The Hoover Company www hoovercompany com Grounding Instructions This appliance must be grounded If it should malfunction or breakdown
12. p of lid and secure latches CAUTION Wear safety goggles when using blower Do not blow toward people animals or objects that may be damaged by flying debris Do not wear loose clothing or jewelry Secure loose hair with a hat or hair net Wear substantial footwear and long pants Wear ear protection if using the blower for a prolonged period of time Do not use blower in wet or rainy conditions Turn blower off before setting it down Storage Empty tanks see Maintenance section Rinse inside of tank thoroughly with clean water particularly if spills or other liquid substances other than plain water have been picked up Wipe inside of tank dry Loop cord over cord storage hook located on tool rack Wands store on rear caster supports The larger diameter wands fit into outer triangle the smaller diameter wands store inside the larger wands and over small triangular peg Tools store on tool rack as shown Emptying tanks After dry pick up Disconnect cleaner from electrical outlet Release lid latches and remove cleaner lid from tank To avoid back strain do not lift a full tank First scoop out enough debris to make tank easier to lift Empty contents into a suitable receptacle Rinse inside of tank with clean water and wipe dry Note If not very full the inner tank may be easier to empty if it is removed from the outer tank When emptying the inner tank do not grab onto filter ca
13. s locate the nearest Hoover Factory Service Center or Authorized Hoover Warranty Service Dealer Depot by e checking the Yellow Pages under Vacuum Cleaners Household OR e checking the list of Factory Service Centers provided with this cleaner OR e calling 1 800 944 9200 for an automated referral of authorized service outlet locations U S only OR checking the Service section of The Hoover Company online at www hoovercompany com Do not send your cleaner to The Hoover Company in North Canton for service this will only result in delay If further assistance is needed contact The Hoover Company Consumer Response Center North Canton Ohio 44720 Phone 330 499 9499 In Canada contact Hoover Canada Burlington Ontario L7R 448 Phone 1 800 263 6376 Always identify your cleaner by the complete model number when requesting information or ordering parts The model number appears on the portable blower HOOVER y 2 marcas registradas HOOVER et des marques d pos es THE HOOVER COMPANY NORTH CANTON OHIO THE HOOVER COMPANY NORTH CANTON OHIO 44720 HOOVER nD are registered trademarks THE HOOVER COMPANY NORTH CANTON OHIO 44720 3 98 S6760 Litho USA 56514 020
14. with squeegee if available to hose end Make sure cleaner lid is locked in place Plug power cord into a properly grounded outlet and turn cleaner ON Do not use cleaner as a pump to clean out clogged drains sinks or other plumbing fixtures If cleaner will not pick up check filters They may need to be cleaned or replaced see Maintenance section Separate wet dry tanks This feature allows you to change from wet pick up to dry pick up without having to empty the tank or change filters Dry debris will collect in the inner tank and wet debris will collect in the outer tank Wear ear protection if operating cleaner for a prolonged period of time Make sure that the small foam and cartridge filters are in place Single tank operation For picking up very large amounts of debris either wet or dry the cleaner may also be operated without the inner tank in place Disconnect cleaner from electrical outlet Remove inner tank and set aside Attach hose to either the wet or dry intake port Plug power cord into a properly grounded outlet and turn cleaner on When using single tank for dry pick up cartridge filter must be in place For best results when using single tank for wet pick up use a HOOVER foam filter sleeve instead of the cartridge filter See Filters in the Maintenance section for availability of HOOVER filters Automatic wet shut off When either tank is full of liquid the
Download Pdf Manuals
Related Search