Holmes HASF1522RCI User's Manual
Contents
1. HASF1522RCl 16 REMOTE CONTROL STAND FAN Owner s Guide INFO HOT LINE If after reading this owner s guide you have any questions or comments please call 1 800 5 HOLMES and a Customer Service Representative will be happy to help you PLEASE READ AND SAVE THESE INSTRUCTIONS IMPORTANT INSTRUCTIONS When using electrical appliances basic safety precautions should always be taken including the following Use fan only for purposes described in the instruction manual To protect against electrical shock do not immerse unit plug or cord in water or spray with liquids Close supervision is necessary when any appliance is used by or near children Unplug from outlet when not in use when moving fan from one loca ion to another before putting on or taking off parts and before deaning e Avoid contact with moving parts Do not operate in the presence of explosive and or flammable fumes Do not place fan or any parts near an open flame cooking or other heating appliance Do not operate any appliance with a damaged cord plug after the appliance malfunctions or has been dropped damaged in any manner The use of attachments not recommended or sold by the appliance manufacturer may cause hazards Do not use outdoors Pagel Do not let the cord hang over the edge of a table counter or come in contact with hot surfaces To disconnect grip plug and pull from wall outlet Never yank on cord A2. IVE 5 Year Limited Warrant purchased below SAVE THIS WARRANTY INFORMATION A The quality controls used in the manufacture of this Holmes product STORE NAME are to ensure your satisfaction LOCATION B The Warranty Reg kain ae encoge Wa uy pocut must be completed and returned within 10 days of purchase for your DATE PURCHASED Warranty to be effective This Warranty applies only to the original a tetas of this pouc P This Warranty applies ONLY to repair or replacement of any supplie APLE RECE EDERE or manufactured parts of this product that upon inspection by Holmes authorized personnel proves to have failed in normal use due to defects in material or workmanship Holmes will determine whether to repair or replace the unit This Warranty does not apply 0 installation expenses D Operating this unit under conditions other than those recommende or at voltages other than the voltage indicated on the unit or eens to service or modify the unit will render this WARRANTY VOID E Unless otherwise proscribed by law Holmes shall not be liable for any personal injury property or any incidental or consequential damages of any kind induding water damage resulting from mal functions defects misuse improper installation or alteration of this product F All parts of this Holmes product are guaranteed for a period of 5 years as follows 1 Within the first 30 days from date of purchase the store from which you purchased your Holmes product
3. clockwise and tighten firmly STEP 3 Slide the fan blade with the hollowed interior of the blade facing owards the rear grill firmly onto the motor shaft Make sure the motor shaft pin lines up with the recessed groove in the back of he fan blade Also be sure the shaft protrudes from the front of he blade STEP 4 Secure fan blade onto the motor shaft by turning the blade cap counter clockwise make sure the blade is firmly in position nstall the front grill by snapping the circular front grill center ogo plate in place STEP 6 Center the front grill aligning the Holmes logo so it is horizontal and parallel to the floor place onto the rear grill and snap in place Secure by tightening the grill screw at the bottom of the rear grill STEP 5 p 4 7 a i A LOGO PLATE SNAP ON K SPEED CONTROL KNOB B FRONT GRILL L OSCILLATION BAR C BLADE CAP M MOTOR HOUSING Bee NS D FAN BLADE N TILT OINT Wa E REAR GRILL MOUNTING 0 TILT ADJUSTMENT KNOB NUT P NECK JOINT F PLASTIC BAND Q HOLLOW END FEMALE G GRILL SCREW R THREADED JOINT MALE 7 H REAR GRILL S EXTENSION POLES MOTOR SHAFT TARAS CRUE J GRILL MOUNT U WEIGHTED INSERT U V BASE NUT w Final Assembly Insert the fan head neck joint see figure 3 into the hollow end of the top pole and slowly turn the neck joint to lock in place Be careful to align the cutaway grooves on the neck joint with the tw
4. disassembled we recommend using the original or appropri ately sized box e f stored assembled or partially assembled remember to protect the fan head from dust a The exclusive Holmes Products FanBonnet is available to protect your fan See attached mail order form for special offer or call 1 800 5 HOLMES FAN SERVICE INSTRUCTIONS 1 Do NOT attempt to repair or adjust any electrical or mechanical func tions on this unit Doing so will void the warranty 2 If you have any questions re Artin this unit s operation or believe any repair is necessary please call 1 800 5 HOLMES to speak with a Customer Service Representative If you need to exchange the unit please return it in its original carton with a sales receipt to the store where you eat it If you are return ing the unit more than 30 days after the date of purchase please see the enclosed warranty 4 If you have any other questions or comments feel free to write us at The Holmes Group P O Box 769 Milford MA 01757 0769 DETACH FROM INSTRUCTIONS AND MAIL IN THIS FORM w EXTEND THE LIFE OF YOUR FAN For short term or seasonal storage of your Holmes fan FAN BONNET 9 99 PLUS SHIPPING AND HANDLING Fill out form on reverse side or call 1 800 5 HOLMES to place your order today For your own records staple or attach your sales receipt to this manual Also please take a moment to write the store name location and date F
5. er upside down pole facing floor and place the weighted insert into the base cover The pole threads will be exposed as they protrude through the base insert Note Hold the pole base cover and weighted insert in one hand while tightening the base nut with the other hand STEP 3 Now place the base nut on the threaded section and hand tighten base nut to securely fasten the pole to the base Note Do not use a tool to tighten the base nut Pole Assembly You will need the second pole ote The poles are interchangeable nsert the pole with the threaded joint male end see figure 2 into the hollow end of the second pole female end see figure 2 until both poles meet Be careful to align the cutaway grooves on the hreaded joint male end with the iy fig 2 CUTAWAY GROOVES two protruding pieces inside the hol ea ow end of the second pole female end HOLLOW END ow Slowly turn the pole with the hreaded joint clockwise to lock it securely in place see figure 2 _ female end Page2 You are now ready to assemble the fan head See Figure 3 STEP 1 Position the rear grill over the motor shaft making certain the 2 notches at the top and bottom of the rear grill fit over the 2 prongs on the motor housing Please make sure the rear grill fits securely against the motor housing STEP 2 Fasten the rear grill in place using the rear grill mounting nut Turn the nut
6. lways use on a dry level surface Do not operate without fan grills properly in place This product is intended for household use ONLY and not for commer cial or industrial applications PLEASE READ AND SAVE THESE INSTRUCTIONS WARNING To reduce the risk of fire or electrical shock DO NOT USE THIS FAN with any SOLID STATE Fan Speed Control Device THIS PRODUCT IS EQUIPPED WITH A POLARIZED A C Alternating Current PLUG a plug having one blade wider than the other This plug will fitinto 4 he power outlet only one way This is a safety fea ure If you are unable to insert the plug fully into he outlet try reversing the plug If the plug should still fail to fit contact an electrician to replace the obsolete outlet DO NOT DEFEAT THE SAFETY PURPOSE OF THIS POLARIZED PLUG ASSEMBLY INSTRUCTIONS Fan Head Assembly Carefully unpack contents of carton Base Assembly You will need the base cover weighted insert 1 pole either can be used they are interchangeable and base nut STEP 1 Insert 1 pole through the base cover and twist pole clockwise to ock in position Be careful to fig 1 POLE align the oiavayi aeea T grooves on the hreaded joint qyTAWAY BASECOVER O male end gaooves ON TOP see figure 1 with the two BASE COVER protruding WEIGHTED INSER raised pieces inside the hol 2 BASE NUT ow end of the m base cover see figure 1 STEP 2 Now turn the base cov
7. o protruding raised pieces inside the hollow end of the pole Lastly insert the tilt adjustment knob into the neck joint and tighten until it is securely in place OPERATING INSTRUCTIONS Step 1 Set fan base on a dry level surface Step 2 Plug cord into any standard 120 volt AC outlet Please make sure he Speed Control Knob is in the Off position This knob is located on the top of the Fan Motor Housing Step 3 The speed is adjusted by turning the control knob to the desired setting Off High Med Low Step 4 The Oscillation Control Bar is located on the top of the Fan Motor Housing To Start Oscillation Push Bar Down To Stop Oscillation Pull Bar Up Special Note This fan can be used in a straight up Total Flex position as a whole room air circulator See Adjustment Instructions ADJUSTMENT INSTRUCTIONS Height Adjustment This fan is equipped with two poles which allow you to adjust the height of the fan for three height settings e Small Pole Only 30 e Larger Pole Only 35 Both Poles for 50 Fan Head Tilt Adjustment This fan is equipped with a multi angle fan head which includes Total Flex for Whole Room air circulation Follow the steps below to properly adjust the Tilt angle of your fan Note The Oscillation feature may be used in all positions including Total Flex Step 1 To change the tilting angle of the fan head simply loosen the Tilt Adjustment Knob see figure 3 o
8. receipt or PROOF OF PURCHASE H c your 12 50 check for return shipping and handling and d the model number of the unit and the problem you are having Method of Payment Gheck Money order CMC CY Visa Enclose in an envelope and tape directly to the unit before the box Account i is sealed Exp Date 3 Holmes recommends you ship the package U P S ground service for nu i tracking purposes 9 i 4 All shipping charges must be prepaid by you as noted in paragraph i R SHIP TOUSE Pn 5 Ship to THE HOLMES GROUP CUSTOMER SERVICE DEPARTMENT i 233 FORTUNE BLVD MILFORD MA 01757 NAME SHIPPING AND HANDLING CHARGES 10 00 This warranty gives you specific legal rights and you may have other STREET rights which vary from state to state The provisions of this warranty are CITY STATE ZIP i in addition to and not a modification of or subtraction from the statutory i Warranties and other rights and remedies contained in any applicable leg To order please send your U S Bank check or money islation To the extent that any provision of this warranty is inconsistent order and this completed form to THE HOLMES GROUP dh any appien law 7 provison shall be deemed voided or amend P O Box 769 Milford MA 01757 0769 py e0 as necessary 0 I WiN SUCI aw ASEAN HASF1522RCIO0UM1 Printed in China Page 4
9. should replace this product if it Is defective in material or workmanship provided the store has in stock replacement 2 Within the first sixty months from date of purchase subject to the conditions in paragraph H Holmes will repair or replace the product 2 ____DETACH FROM INSTRUCTIONS AND MAIL IN THIS FORM if it is defective in material or workmanship providing it is returned i o Holmes freight prepaid with PROOF OF PURCHASE date together PLEASE USE THIS FORM TO ORDER BY MAIL i with 10 00 for return shipping and handling charges with this product please write our A phot f this f ill not b ted iG If you have any problen E R E ig a a TRE H Customer Service Dept or call 1 800 5 HOLMES H IMPORTANT RETURN INSTRUCTIONS Your warranty depends on your neh DESCRIPTION QUANTITY PRICE SUB TOTAL i ollowing these instructions if you are returning the unit more than LDB FanBonnet 610 99ea 30 days after the date of purchase for HASF1522RCI i 1 Carefully pack the item in its original carton or other suitable box to Mass residents add appropriate sales tax avoid damage in shipping Postage and Handlin i 2 Before packing your unit for return be sure to enclose osagean 9 5 00 a your name full address with zip code and telephone number TOTAL i b a dated sales
10. ve the fan head to the desired angle and firmly tighten the nob to lock in place Step 3 This fan can be tilted to a straight up position offering Total Flex Oscillation ote Whenever tilting the fan head be sure to securely tighten in place Step 2 x CLEANING MAINTENANCE INSTRUCTIONS Follow these instructions to correctly and safely care for your Holmes Products stand fan Please remember e Always unplug the fan before cleaning or disassembling Do not allow water to drip or enter the fan housing Be sure to use a soft cloth moistened with mild soap solution Do not use any of the following as a cleaner gasoline thinner benzine Fan Blade Cleaning See instructions for fan head assembly on page 2 figure 3 STEP 1 To access the fan blade remove the front grill and blade cap STEP 2 Clean the fan blade front and rear grills with a soft moist cloth STEP 3 Replace blade tighten blade cap and securely fasten the front grill Page 3 Fan Head Base and Pole Cleaning Using a soft moist cloth with or without a mild soap solution carefully Clean the fan base pole and head Please use caution around the motor housing area Do not allow the motor or other electrical components to be exposed to water FAN STORAGE Your fan can be stored in the off season either par ai disassemibigd or assembled It is important to keep it in a safe dry location e If stored
Download Pdf Manuals
Related Search