Harbor Freight Tools Non_Contact Pocket Thermometer Product manual
Contents
1. Owner s Manual amp Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions assembly operating inspection maintenance and cleaning procedures Write the product s serial number in the back of the manual near the assembly diagram or month and year of purchase if product has no number Keep this manual and the receipt in a safe and dry place for future reference P T TTSB URGH ITEM 93983 Non Contact Pocket Thermometer Visit our website at http www harborfreight com REV 14c Email our technical support at productsupport harborfreight com When unpacking make sure that the product is intact AWARNING and undamaged If any parts are missing or broken please call 1 888 866 5797 as soon as possible Copyright 2009 by Harbor Freight Tools All rights reserved i No portion of this manual or any artwork contained herein may be reproduced in Read this material before using this product Failure to do so can result in any shape or form without the express written consent of Harbor Freight Tools Diagrams within this manual may not be drawn proportionally Due to continuing serious injury SAVE THIS MANUAL improvements actual product may differ slightly from the product described herein Tools required for assembly and service may not be included cations Measurement Range Operating Temperature Resolution Accuracy at 68 to 78 F ambient F2. a Off Notice LOCK If I below 27 F g 5 1 Jicon in center of _to0 example screen ia Ambient temperature e El Unit will not shut off changing too rapidly m Notice thermometer if E r 2 for accurate reading Pad 38 in lower right corner k d L dd e of example screen Ambient temperature Page 7 Li ited 90 Day Warranty Harbor Freight Tools Co makes every effort to assure that its products meet high quality and durability standards and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase This warranty does not apply to damage due directly or indirectly to misuse abuse negligence or accidents repairs or alterations outside our facilities criminal activity improper installation normal wear and tear or to lack of maintenance We shall in no event be liable for death injuries to persons or property or for incidental contingent special or consequential damages arising from the use of our product Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation of exclusion may not apply to you THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS To take advantage of this warranty the product or part must be returned to us with transportation charges prepaid Proof of purchase
3. date and an explanation of the complaint must accompany the merchandise If our inspection verifies the defect we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement We will return repaired products at our expense but if we determine there is no defect or that the defect resulted from causes not within the scope of our warranty then you must bear the cost of returning the product This warranty gives you specific legal rights and you may also have other rights which vary from state to state PITTSBURGH 3491 Mission Oaks Blvd PO Box 6009 Camarillo CA 93011 1 888 866 5797
4. de and show the current time and room temperature after use if the clock is set If the clock is not set the display will shut off after use conserving battery power 1 Press Meas 2 Press Mode six times and the Set icon starts to flash indicating setup mode Temperature Unit Setup 22 gg al Stes p Sf which indicates the 12 24 hour setting 12 24 hour setting screen Press Meas to make the 24 icon flash screen Press Meas again to set 12 24 hour Format from 24 hour to 12 hour Press Mode to switch to hour setting Use Meas to change it Press Mode to switch to minute setting mode Use Meas to change it Press Mode when complete To disable standby mode and enable the automatic shutoff remove the battery or at least a minute and do not set he clock after replacing the battery 1 Press Meas once to turn the unit on 2 Press Mode five times and the temperature unit icon starts to flash either C or F 3 Press Meas to toggle the unit between C and F 4 Press Mode when complete Page 4 For technical questions please call 1 888 866 5797 Item 93983 Thermometer Operation Note The Distance to Spot size ratio is 1 1 Make sure the target area is within the field of view Normal Mode Note Applications include Water Milk Cloth or Skin non medical for
5. e to turn the unit on 2 Press Mode four times and the count icon starts to flash Hours Minutes Seconds 00 3 36 resolution 0 01sec 3 To start or stop timer press Meas To reset the timer press Mode with the timer stopped 4 Press Mode again to exit the timer mode Record Serial Number Here Note If product has no serial number record month and year of purchase instead Note Replacement parts are not available for this item Page 6 For technical questions please call 1 888 866 5797 Item 93983 Maintenance 1 Keep the sensor lens clean using a soft cloth or cotton swab dipped in water or rubbing alcohol Allow the lens to dry fully before use Battery Replacement 2 Storage temperature 4 149 F 1 If the display appears as above the battery 3 is too low to allow further operation 2 Allow the unit to turn off or go to standby mode The device may malfunction if the battery is removed while on Troubleshooting Turn open the cover on the rear of the thermometer 4 Replace with another CR2032 battery in the same orientation Erd outside 14 F to 122 F range Item 93983 For technical questions please call 1 888 866 5797 Icon Problem Icon Problem Temperature H above 230 F E Other error message l J J l C 5 or 129 JUnit will not shut Temperature Hott tem
6. entertainment only 1 Make sure the sensor lens is clean and undamaged 2 Press Meas once to turn the unit on Lock Mode 3 When you press Meas you will get the temperature immediately If you hold down Meas the reading of measurement will be continuously updated 4 Device will automatically power off standby if left idle for more than 15 seconds 1 Make sure the sensor lens is clean and undamaged 2 Press Meas once to turn the unit on 3 Press Mode three times and the unit will display the LOCK icon shown right Minimum Maximum Reading Mode 4 Press Meas to confirm and start continually reading temperature 5 The thermometer will continue measuring temperatures up to an hour or until Meas is pressed again 1 Make sure the sensor lens is clean and undamaged 2 Press Meas once to turn the unit on 3 Press Mode once for Minimum MIN mode or twice for Maximum MAX mode The display will show the icon for the mode chosen MIN MAX 4 Press Meas to confirm 5 Press Meas to start reading temperature The display will only show either the lowest or highest temperature read depending on the mode D Device will automatically power off standby if left idle for more than 15 seconds Item 93983 For technical questions please call 1 888 866 5797 Page 5 Timer Operation 1 Press Meas onc
7. ield of View Emissivity Battery Battery Life Important Safety Information Use Precautions E Eog Do not use fi medical appl or food safety or ications This product is not a toy Do not allow children to pl ay with this item Use as intended only Inspect befo use if parts Contains bu out of reach re every use do not loose or damaged ton cell battery Keep of children Discard used batteries immediately Do not allow children to pl ay with this device Service Precautions o a 230 F 4 122 F 1 F 0 01 second 2 4 F Readings may be affected if within an electromagnetic field one CR2032 lithium cell included Risk of Fire and Burns Do Not Open Crush Heat or Incinerate battery Dispose of internal battery properly in accordance with applicable law Maintain product labels and nameplates These carry important safety information If unreadable or missing contact Harbor Freight Tools for a replacement 1 Wear ANSI approved safety goggles and heavy duty work gloves when replacing battery Page 2 For technical questions please call 1 888 866 5797 Item 93983 Controls Sensor lens Sy Mode Button Item 93983 For technical questions please call 1 888 866 5797 Page 3 Clock Setup we 7H PG 2381 251 Standby mode Power on Note The display will go to standby mo
Download Pdf Manuals
Related Search