Harbor Freight Tools Grinding Wheel Dresser Product manual
Contents
1. the grinding wheel see Figure 2 4 Hold the Dresser firmly on the grinder tool rest Two tabs steady the Dresser on the tool rest for an even finish With firm and even pressure guide the Dresser back and forth across the rotating grinding wheel holding it square to the surface 5 The straight handle offers firm control Continue to apply pressure until the grinding wheel s surface is flat and squared true 6 Warning Always be alert to and protect yourself from heat sparks and filings Maintenance 1 Check the Screw 2 and Grinding Wheels 3 before each use Make certain that the Screw 2 is tight and that the Grinding Wheels are not worn or damaged 2 Clean the Grinding Wheel Dresser and Grinding Wheels after each use Remove any debris grease oil and dirt Parts List Part Description Quantity 1 Grinding Wheel Dresser 1 2 Screw 1 3 Grinding Wheels 6 Note Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATES THAT A2. GRINDING WHEEL DRESSER Distributed Exclusively by N a HARBOR FREIGH Ar TOOLS im 3491 Mission Oaks Blvd Camarillo CA 93011 Visit our Web Site at www harborfreight com Copyright 2005 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools For technical questions and replacement parts please call 1 800 444 3353 THANK YOU for choosing a HARBOR FREIGHT TOOLS product For future reference please complete the owner s record below Model Serial No Purchase Date SAVE THE RECEIPT AND THESE INSTRUCTIONS It is important that you read the entire manual to become familiar with the unit BEFORE you begin assembly Expose sharp new cutting surfaces and give your worn grinding wheels new life Technical Specifications Cutters Replaceable hardened star toothed cutters Dimensions 6 x 1 1 2 x 1 3 8 IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT Safety Warnings and Precautions WARNING When using product basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment Read all instructions before using this product 1 Keep work area clean Cluttered areas invite injuries 2 Observe work area conditions Keep work area well lighted 3 Store idle equipment When not in use th
3. LL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO SKU 1682 For technical questions please call 1 800 444 3353 Page 4
4. e Grinding Wheel Dresser must be stored in a dry location to inhibit rust Always lock up products and keep out of reach of children 4 Use the right product for the job There are certain applications for which the Dresser was designed Do not modify the Grinding Wheel Dresser and do not use it for a purpose for which it was not intended 5 Check for damaged parts Before using any product any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function Check for any broken or damaged parts and any other conditions that may affect its operation Replace or repair damaged or worn parts immediately 6 Replacement parts and accessories When servicing use only identical replacement parts Use of any other parts will void the warranty 7 Do not operate product if under the influence of alcohol or drugs Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs If there is any doubt do not operate the product 8 Use eye and ear protection Always wear ANSI approved impact safety goggles Wear a full face shield if you are producing metal filings Wear an ANSI approved dust mask or respirator when working around metal wood and chemical dusts and mists SKU 1682 For technical questions please call 1 800 444 3353 Page 2 9 Do not overreach Keep proper footing and balance at all times Do not reach over or across run
5. g Wheel Dresser Replacing Grinding Wheels in the Dresser assembly 1 The Grinding Wheels 3 will require replacing when they wear down due to repeated use The duration of the Grinding Wheels 3 before necessary replacement will depend on the amount and intensity of use during dressing 2 Check the Grinding Wheels 3 before every use to make certain that they are not exceedingly worn or damaged 3 Remove the Screw 2 as shown in Figures 1 and 2 When the Screw is pulled out the six Grinding Wheels 3 will slide off of it Rs Dresser gt Placement on grinder Screw 2 Grinding Wheels 3 ee SKU 1682 For technical questions please call 1 800 444 3353 Page 3 4 Set the six new Grinding Wheels 3 into the jaws of the Grinding Wheel Dresser Slide the screw 2 through the Grinding Wheel Dresser 1 and through the Grinding Wheels 3 Tighten the Screw 2 back into place Operation When operating your Grinding Wheel Dresser refer to Figures 1 and 2 1 Make certain you are wearing appropriate eye protection work gloves and protective clothing Make certain that all guards are in place 2 Turn on the grinder you will be using Make certain to follow all safety instructions as outlined in both this manual and the grinder s owner s manual 3 Firmly grasp the Grinding Wheel Dresser as shown in Figure 2 Align the Dresser with the grinding wheel so that the Dresser Wheels 3 are in direct contact with
6. ning machines 10 Maintain tools with care Keep tools sharp and clean for better and safer performance Follow instructions for lubricating and changing accessories Inspect tool cords periodically and if damaged have them repaired by an authorized technician The handles must be kept clean dry and free from oil and grease at all times 11 Always check hardware and assembled parts after assembling All connections should be tight and hardware tightened 12 Keep hands out of the grinding area and away from the wheel Do not wear loose clothing that could get caught in grinding wheel 13 Wear appropriate clothing Always wear ANSI approved gloves when working with a grinder Warning The warnings cautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur It must be understood by the operator that common sense and caution are factors which cannot be built into this product but must be supplied by the operator Unpacking When unpacking your Grinding Wheel Dresser check to make sure that the product is intact and undamaged If any parts are missing or broken please call HARBOR FREIGHT TOOLS at 1 800 444 3353 Assembly Your Grinding Wheel Dresser comes completely assembled Instructions are included for installing new Grinding Wheels when necessary It is important that you read the entire manual to become familiar with the product BEFORE you use the Grindin
Download Pdf Manuals
Related Search