Harbor Freight Tools 15 Bin Tabletop Parts Rack Product manual
Contents
1. After assembly label each Bin via the Name Plate Holder 3 For example Nut M5 Washer 5mm Bolt M5x10 Nails etc Rack 1 a Bolt 7 Washer a Slip the Name Plate Holder off the front of the Bin 7 6 Nut 8 b Place a label between the Name Stand 2 io Plug 5 Plate Holder s plastic sleeve Figure A c Snap the Name Plate Holder back 2 Tap the Plugs 5 into each end of in place See Figure C both Stands 2 See Figure A 3 Click the colored Bins 4 1 4 2 and 4 3 into place hace Pinte over the hooks on the Rack 1 See Figure B iden Red Bin 4 1 Blue Bin 4 3 Yellow Bin 4 2 Rack 1 Figure C Figure B Page 2 For technical questions please call 1 888 866 5797 Item 93198 Maintenance Procedures not specifically explained in this manual must be performed only by a qualified technician 1 To remove dust use a damp cloth To remove 2 This product should be stored in a dry area grease or oil use a detergent based cleaning solvent rinse and dry with a cloth Parts List and Diagram Part _ Description _ Qty Part Description Blue Bin Plug 6 Washer 5mm Bolt M5X10 Yellow Bin Nut M5 Record Serial Number Here Note If product has no serial number record Note Some parts are listed and shown for month and year of purchase instead illustration purposes only and are not available individually as replacement parts Item 93198 Fo2. N Assembly Precautions 1 Assemble only according to these instructions 4 Keep bystanders out of the area during assembly Improper assembly can create hazards 5 Do not assemble when tired or when under the 2 Wear ANSI approved safety goggles and influence of alcohol drugs or medication heavy duty work gloves during assembly 6 Weight capacity and other product capabilities apply 3 Keep assembly area clean and well lit to properly and completely assembled product only Use Precautions This product is not a toy Do not allow 4 Do not exceed listed weight capacity loaded from children to play with or near this item bottom up Be aware of dynamic loading Sudden load movement may briefly create Inspect before every use do not use excess load causing product failure if parts are loose or damaged Use as intended only 5 Maintain product labels and nameplates These carry important safety information If unreadable or missing contact Harbor Freight Tools for a replacement Assembly Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product Ad 1 Attach the right and left Stands 2 to the 4 Do not overload the individual Bins Rack 1 using Bolts 7 Washers 6 especially those in the top row This and Nuts 8 See Figure A could cause the Bin Rack to tip over 5
3. Owner s Manual amp Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions assembly operating inspection maintenance and cleaning procedures Write the product s serial number in the back of the manual near the assembly diagram or month and year of purchase if product has no number Keep this manual and the receipt in a safe and dry place for future reference Item 93198 IS Bin Tabletop Parts Visit our website at http www harborfreight com Email our technical support at productsupport harborfreight com When unpacking make sure that the product is intact and undamaged If any parts are missing or broken AWARNING please call 1 888 866 5797 as soon as possible Copyright 2005 by Harbor Freight Tools All rights reserved n p No portion of this manual or any artwork contained herein may be reproduced in Read this material before using this product any shape or form without the express written consent of Harbor Freight Tools Failure to do so can result in serious injury Diagrams within this manual may not be drawn proportionally Due to continuing SAVE THIS MANUAL improvements actual product may differ slightly from the product described herein Tools required for assembly and service may not be included Specifications Molded Polyethylene Plastic Bin Interior Dimensions 5 D x 3 5 W Weight Capacity 5 Ib per Bin 75 Ib total for rack IMPORTANT SAFETY INFORMATIO
4. or for incidental contingent special or consequential damages arising from the use of our product Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation of exclusion may not apply to you THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS To take advantage of this warranty the product or part must be returned to us with transportation charges prepaid Proof of purchase date and an explanation of the complaint must accompany the merchandise If our inspection verifies the defect we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement We will return repaired products at our expense but if we determine there is no defect or that the defect resulted from causes not within the scope of our warranty then you must bear the cost of returning the product This warranty gives you specific legal rights and you may also have other rights which vary from state to state 3491 Mission Oaks Blvd PO Box 6009 Camarillo CA 93011 1 888 866 5797
5. r technical questions please call 1 888 866 5797 Page 3 PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO Limited 90 Day Warranty Harbor Freight Tools Co makes every effort to assure that its products meet high quality and durability standards and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase This warranty does not apply to damage due directly or indirectly to misuse abuse negligence or accidents repairs or alterations outside our facilities criminal activity improper installation normal wear and tear or to lack of maintenance We shall in no event be liable for death injuries to persons or property
Download Pdf Manuals
Related Search