Haier HWM70-98 User's Manual
Contents
1. Total time including the normal water inlet time and drain time The total washing time may be influenced by the water inlet pressure and water level Spin time From the moment the intermittent spinning starts to the moment it stops running the time displayed on spin digitron is from intermittent spinning to the moment before inertia spinning the time displayed on the time remain digitron is the total remained time In selecting posthaste program the washing machine will set the complete procedures of water level selectior washing rinsing and spinning automatically During saving water program if the water inlet pressure is lower the machine will come into rinse with water When selecting soak procedure it will first soak for 10 40 minutes then do washing rinsing and spinning H Push the reserve button to select suitable reserve wash program ae RESERVE After switching on the power the reserve program is set to off mode automatically If you need to set the washing procedure to be finished at reserved time please push the RESERVE button to set the reserve wash program Refer to RESERVE button in Ae 11 for selection rr e When the reserve function is activated the indicator light of the program you have set will be off The remained time will be displayed During reserve procedure push the RESERVE button to display the reserve mode e Tochange the running program or cancel the reserve setting you2. HWM70 98 Computerized Full auto Washing Machine Please read this manual carefully before using Retain it for future reference Please check if the power receptacle has good earthing condition before using to guarantee your safety The manufacturer will not bear the responsibility for those risks occurred from not obeying this manual Haier Contents Before using Names of the parts ceeece The 2nd cover Safety precautions 1 Installation and adjustment cece 3 Install the water inlet hose 5 Using Process Preparation before washing 7 Put in the laundries 8 Use of the detergent 9 Use the operation buttons 10 Close the top lid cece 14 Finish washing 14 Disposal after washing 15 Trouble shooting answer to question 16 Names of the parts Honourable users Thank you for choosing our products Before Using Our products integrate high tech precision frontier science To facilitate using it please read this manual carefully and operate this machine according to it Top lid component Inner cover components Detergent box Control panel Outer tub cover Balance ring Attachment block 3 pieces Inner tub Lint filter Pulsator Control panel coating Cabinet Liquid wahitener inlet Adjustable leg Inner cover components One piece Bottom plate One piece the en
3. need to switch off the power and make new selection 6 Push the START PAUSE button ae 5 Close the lid 4 As the top lid opened the Washer will automatically give an alarm and stop running exclusively during supplying water and rinsing 6 Finish washing After finishing wash it ll switch off the power automatically After Finishing wash alarm automatically 14 7 Disposal after washing Using process After using please clean the lint and foreign materials of the lint filter etc in time Otherwise it may influence your using the machine Please first pull off the power plug from the receptacle before cleaning Clean the detergent box and set it on the control a seat The lint filter must be used during washing 1 The method of dismantle Push it up aslant and gently e It must be cleaned in time after each using 2 The method of install install it upwards and aslant and push it in Lint filter 1 Pull it up to dismantle 2 Push it down to install LFS Lr 3 Clean the filter screen after washing k v Dismantle Install Dismantle Install Install Dismantle Dismantle and install The filter screen of the water inlet valve is likely to be If the cabinet is dirty wipe it with wet cloth blocked by foreign materials and influence the water Do not flush it directly with water inlet Wipe it with neutral detergent Please clean it with brush every two months e Do not wipe it with thi
4. small En quantity and light soil Pau gt In selecting the normal program the machine i will execute fuzzy program to select water 4 seit and wash time according to the cloth and weight Woollen gt a APR of the laundries The full procedure is controlled Silk Jeans automatically 3 Push the SOAK WASH RINSE or SPIN button to select suitable procedure Minutes Minutes Times Minutes E SOAK WASH RINSE SPIN rhe 12 Using process After switching on the power the washing machine will set to common program including wash rinse spin automatically To select other procedures push the SOAK WASH RINSE or SPIN button to select the time of soak wash and spin and the times of rinse After switching on the power if you push one of the button among WASH RINSE and SPIN the digitron of the former procedures will turn off automatically The former procedures will not run For instance after switching on the power If you push the SPIN button first it will execute spin singly after starting Even there s no water in the tub a certain period is required before spin starting Do not use the soak program for the woolen textiles Separate the laundries that are not colorfast from other laundries in washing The pulsator will not rotate unless the water is filled to water level 3 e After the machine starts operation you can only set the program and pr
5. the START PAUSE button The child lock function is activated All of the buttons are locked and cannot make selection e Release the child lock function push down the WATER LEVEL and SPIN button at the same time for more than 1 second After a beep sound the child lock function is released Reserve remain time indicator digitron e During sensing it displays e During reserve procedure it displays the remained reserve time in hour e During operation of programs it displays the remained time minute If the remained time exceeds 99 minutes e it adopts A at tens place to represent 100 minutes b to represent 110 minutes For instance A3 represents 103 minutes In case of abnormal phenomenon it displays the abnormal symbol see to Page 16 Page 161 y Time remained minutes Reserve hours later WATER a RESERVE LEVEL WATER LEVEL button The washing machine can detect the laundries automatically After detection it will set the water level to suitable value among 4 6 8 and 10 automatically e You can also set water level by self After the machine is started it will not set water level automatically You shall push the START PAUSE button to make new setting f there s water inside the tub the machine cannot detect the laundries and will display water level 6 e f wet laundries are put in it may display water level 10 You must set suitable water level by yourself e f POSTHASTE program is se
6. 1 Connect the water inlet hose Open the water faucet 2 Confirm that the washing machine is earthed reliably Then insert the power plug into the receptacle The earth terminal shall not link to gas pipeline and faucet water pipeline 3 Put down the drain hose Check ifi Clear the Tie the long The quantity of When the pulsator the laundries pocket Take strips fasten the laundries is running the has special out the coins the buttons shallnotbetoo buttons of the requirement sand hairpins close zippers large Stretch laundries may on washing etc and loosenthe cause noise For laundries before the sake of putting themin discretion please the tub put the laundries with buttons into other laundries e s S amp B Qa amp _ Check if the laundries are applicable for washing with machine Divide the laundries that are not colorfast from other laundries Put those laundries difficult to absorb water into water with hand Forthose laundries with heavy soil please first remove the dirt like mud or dust For the parts with heavy soil please apply detergent on them in advance which can makeit easierto remove the soil Forthose laundries that may get lint ball and those with long fur turn it over before putting in Donot putthose laundries polluted by chemicals into the washing machine directly 2 Put in the laundries Using process The capacity ofwashing and s
7. aft groove outer tub cover shaft groove ja N innet over shaft 3 Firstly insert the inner cover shaft of I side into the correspon ding outer tub cover shaft groove then push the another inner Outer tub cover cover shaft into the corresponding outer tub cover shaft groove Inner cover Please install to designated position to guarantee there are no dropping or abnormal sound in opening and closing of the inner cover and the operation shall be smooth Do not dismount the inner cover component after washing Install the bottom plate After opening the package please lean the washing machine gently down on soft items like towel cloth blanket etc Install the bottom plate to the bottom of the machine with eight screws by a cross screwdriver then lift the machine up gently See to the figure S Bottom plate Screw Soft items The largest allowed slope of the shank base of the machine is 2 The slanting or rough ground will result in unstable running or stoppage of the machine Please adjust it with following methods Confirm it s horizontal Hang the plumb to confirm it s horizontal Adjust the adjustable foot 1 To twist the adjustable foot at the right front of the cabinet front the sight offront please first i lift up the side of the foot slightly loosen the Loosen AJN Fasten adjustable nut and twist the foot La adjustable foot adjustable nut 2 Fastenthe nut
8. after adjustment Before Using How to change the direction of the drain hose 1 Lean the machine down gently withthe front surface facing theground Loosen the eight screws by across screwdriver Bottom plate 2 Pull out the drain hose from the groove at the left side Use groove at this side after direction changing Usage of the drain hose The drain hose shall drain smoothly 1 The height of the drain hose shall be less than 10cm or the drainage will not be smooth and cost such long time that the machine may stop at mid way 2 Do not ramp or press the drain hose 3 If the drain hose is too long cut it at mid point To make smooth drainage cut the front end of the hose slantingly 3 Extend the drain hose from the right side Push the drain hose into the groove with hands 4 Install the bottom plate as per indicated before then lift the machine up gently 4 lf extra drain hose is needed please make separate purchase The inner diameter of the extra hose shall not less than 30mm and the length shall not exceed 1 5m gt 30mm 5 If the extra hose is too long cutit either atAor atB point Install the water inlet hose Before Using Confirm the water faucet water faucet suitable water faucet not suitable The exit end face of the faucet It is required that the front end shall be longer than 10mm The exit end face of the faucet shall be flat and smooth If not please file it to avoid leak
9. age Connection between the water inlet hose jointer and the water faucet 1 Press the lower end of the lock lever and push down the slider Take off the water inlet hose jointer from the water inlet hose component See to Figure 1 2 Loosen the screw till the water faucet can be accessed Put the jointer of the water inlet hose on the faucet See to Figure 2 If the faucet is too large and the jointer can not be set on the water faucet please loosen the four screws and take out the bushing in the jointer The front end of the faucet must be smooth otherwise it may leak water See to Figure 3 water inlet hose jointer Slider Nameplate Bushing water inlet hose Figure 1 Figure 2 Figure 3 3 Fasten the four screws evenly See to Figure 4 4 Take off the nameplate Twist the fastening nut as per the indication of the figure to seal up the exit end face of the faucet See to Figure 5 Remark Before twisting the fastening nut the threading is 4mm above the upper surface of the nut After twisting the threading is less than 2mm above the upper surface of the nut See to Figure 6 about 4mm after twisting About above 2mm after twisting Screw nut Figure 4 Figure 5 Figure 6 Before Using Connection between the water inlet hose and the washer 1 Do not take off the water absorption cushion Please check if the cushion is dropped or damaged before each usage If it happens nut of the waterinlet hose
10. ashing spinning capacity 7 0kg Water level Water quantity about 1 18L 2 24L 3 30L 4 36L 5 42L 6 48L 7 54L 8 60L 9 66L 10 70L Max water consumption About 120L Highest water level Normal program Water Injection pressure 0 03MPa 0 78MPa Rated washing input power 450W Rated spinning input power 320W Weight About 39kg Overall dimension L610 mm W 580mm H 975 mm Haier Computerized Full a to Washing Machine Model HWM70 98 Degree of Water Proof IPX4 Rated Voltage 220V 240V Rated Frequency 50Hz Rated Washing Capacity 7 0kg Rated Spinning Capacity 7 0kg Rated Washing Input Power 450W Rated Spinning Input Power 520W Rated Current of Fuse 5A CIRCUIT DIAGRAM The Coil L is used to protect the circuit Please do not take it apart cy h Yello Fuse Bron d 8 Toor Yellow Green Yellow switch Blue fast 2 o h Crey water aerer Toler Purple HES Grey_ level Yellow L sensor Tractor 3 oter Inlet vor EH gt Red Red White Ic top he White eo Red White Switch Ul wo
11. bout 36L About 48g gt About 30g About 30L About 40g About 25g About 24L About 18L gt gt gt gt About 32g gt About 20g 1 0below About 24g About 15g 4 Use the operation buttons Using process a Description of the function of the buttons Mode and meaning of the VFD indicator Digital tube O During sensing it displays During operation of programs it displays the remained time minute or remained times of O the frame of the indicator is on indicate the program about to run or indicate the selected mode the corresponding procedure The digital tube corresponding to the running program lights ee ee see ey inne tants Times Minutes E WASH RINSE SPIN a Beeeeeeeea a SOAK button WASH button RINSE button SPIN button e Push the SOAK button to set the soak procedure e During standard and jeans programs push the SOAK button to set different e Push the WASH button to set the wash procedure e During standard and jeans programs push the WASH button to set different soak time 10 20 30 or 40 wash time from 0 to 25 minutes minutes During fibre and cotton e During fibre cotton woollen programs push the SOAK button to select soak and silk programs push the WASH button to select wash procedure but the wash time can not be changed procedure but the soak time can not be changed During quick posthaste woollen and silk programs e During
12. d connecting to the washing machine jointer connecting the water inlet a water faucet pa KC the end connectingto the water inlet hose jointer Water inlet hose One piece Water inlet hose jointer One piece Tapping screw Eight pieces Water absorption cushion Drain hose Back cover Water inlet valve Rear faceplate Draining hose hanging hole m a Handle Meaning and description of the symbols Contents marked with that symbol are related to the safety of the product and the personal safety of the users Please operate in strict conformity to the contents otherwise it may result in damage of the machine or influence the personal safety of the users Contents marked with that symbol are actions forbidden to perform Performing of those actions may result in damage of the machine or influence the personal safety of the users The figure in this manual being sketch map and with the improvement of our products the machine you buy is like to be different from the figure indicated in the manual Please understand Safety precautions Before Using Please plug the power plug on special The washing machine must be positioned receptacle Be sure to use three pins so that the plug is accessible Be sure topull the lug off and close the water faucet in power receptacle Ensure thatthe earthing allowing cases power failure delivering prong of th
13. e power receptacle is earthed the machine setting the machine idle or reliably Use leakage protector if possible cleaning the machine Do not plug or pull the power plug with wet hand phe E l Q Do not bend extend twist bind by force Do not press or nip it with weight Keep the pin of the power plug clean if the power plug is polluted with dust please wipe with dry cloth carefully If the power cord or the power plug is bad to avoid risk it is required to have it replaced by the technicians of our IFN Q ANS EAS In case the washing machine is installed on ground with Do not use water hotter than 50 C carpet do not block the ventilation hole with carpet 2 A special shop or the after sale service department o The ventilation holes at the bottom Soft object Do not put the machine at damp place like Do not wash water proof laundries like the bathroom Never wash it with water Do the raincoat bike covers etc to avoid not put wet laundries on the control panel abnormal vibrations in spinning S Do not let the machine share one receptacle with other electric appliances If the plugging into the receptacle is loose do not use the plug any more Safety precautions Do not stretch hands into the working machine It is dangerous even if the rotation is slow Take special care of the children Before Using Do not decompose repair or alter the machine by yoursel
14. f Do not put any hot or heavy items such as the kettle with hot water on the washing machine Do not wash laundries with volatile materials such as thinner petrol etc The appliance is not instruct for use of young children of infirm persons without supervision Young children should be supervised to ensure that they do not play with the appliance The lint filter shall be kept in good condition and installed to proper position If the lint filter is lost or damaged please contact the local after sales service department of our company Dismantle Install Keep the machine away from direct sunlight and heat source like the heater To prevent your laundries and washing machine from damages be sure to take out all of the foreign materials from your pocket such as coins buttons sandor hair pins etc TT l O A2 Before washing please check if the water tap is open and if the water inlet pipe is connected properly Itis suggested to use low foaming washing powder Installation and adjustment Before Using Please install and adjust the machine according to the requirement of the manual It is very important to your security and correct operating the machine Install the inner cover components 1 Open the top lid of the washing machine 2 Put the inner cover component on the outer tub cover aiming Outer tub cover the inner cover shaft to the installation hole of the corresponding PA ZL sh
15. hine slanting Are the laundries put slantingly in spinning Are there any foreign materials Adjust the machine to be even e Reorder the laundries and close the top lid Remove the foreign materials The water tap leaks e Is the screw of the jointer of water Common phenomena Phenomena e The spinning is intermittent when it starts inlet hose loose or awry Fasten the screw of the jointer properly Explanation e Balance the laundries to avoid slanting e The wash procedure pauses The cloth sensor is detecting it will add water after about 48 senconds e Select spin program but it does not work The program is setting the drain time certain period is needed before it starts spinning There may be some water flowing out of the drain hose in the first use of the machine by the factory e tis the water remained performance inspection Packing list Name Quantity Storage position User s manual One Inside the document bag Components of the water inlet hose one Inside the accessory bag Inner cover component Inside the accessory bag Bottom plate Between the upper cushion of the washing machine package and the upper seal of the package carton Computerized Automatic washing machine 17 Specification Model HWM70 98 Rated voltage frequency 220V 240V 50Hz Rated w
16. lected it will display water level 3 When water level 2 is reached in water filling it will perform washing while filling water When water level 3 is reached it will change to normal washing During operation of wash and rinse program you can push down the water level button to add water When you release the button or it reaches the overflow water level the machine will stop adding water The water level decided may be different from actual value because of the different moisture level of the laundries O COTTON O auick O WOOLLEN POSTHASTE O SILK O JEANS 58 O FIBRE NORMAL Using process Power On Off button Push the POWER ON OFF button to switch on the power When the power is on push it again to switch off the power Push the POWER ON OFF button to switch on the power If the START PAUSE button is not pushed the washing machine will automatically switch off the power after 5 minutes Fuzzy POWER O SIART ON OFF PROGRAM m PAUSE E E EENEN E Start Pause button i After the power is switched on push it to a Start the machine During working push it to pause working During pause push it to resume working RERSERVE button n normal operation mode the reserve indicator light is off The time remain indicator light is on The digitron displays the time remained in minute before the washing is finished Push down the RESERVE button The reserve indicator
17. light is on The digitron displays the reserve time of finishing washing in hour When the machine is started the reserve indicator light is on indicating that the reserve function is running PROGRAM selection button Following automatic programs are available for selection Program Applicable situation Normal Common washing Quick Quick and high efficiency wash for common laundries Posthaste Super quick wash of the laundry under 1 kg with light soil Jeans Washing the relatively big and thick laundriesr Fibre Washing the chimical fiber laundries Cotton Washing the cotton textiles Woollen Washing the woolen textiles Silk Washing the textile 11 Using process b Steps of using the operation buttons and description of the steps o O Norma FIBRE O NORMAL B S 50 08 O coTTON auick i E B ae Reserve hours later O woouen O AN Haier 10 02 O SILK JEANS HWM70 98 ON OFF SOAK WASH Tse SPIN Push the POWER ON OFF button to switch on the power POWER ON OFF 2 Push the PROGRAM button to select suitable automatic program ee PROGRAM After switching on the power the machine will set normal program automatically To select other automatic program push the program button till the relative indicator is on Refer to the program button on Page 11 for the selection For instance select POSTHASTE program for laundries with
18. nner petrol alcohol etc 1 After washing close the water faucet If needed you can dismantle the water inlet hose 2 Do not store water in the washing machine for a long period Drain the water completely after each using 3 Be sure to pull off the power plug before maintenance 4 Hang up the power cord and drain hose 5 Wipe off the water drops on the surface of the machine and inside the tub Open the top lid for some time about 1 hour then close the top lid 15 Trouble shooting Answer to question If there s breakdown please pull off the power plug before checking The following phenomena are not breakdowns sometimes Please confirm again before sending it to repair If there are real breakdowns please come to the special maintenance department or after sale service department of our company Do not repair it by yourself Phenomena The digitron displays E0 The reason e The top lid is opened during reserve procedure How to settle Close the top lid The drainage cannot work or is too slow The digitron displays E1 e Is the drain hose put down Is the drain hose blocked Put down the drain hose Open and close the top lid once Clean the foreign material Open and close The top Lid Once It stops running in midway The digitron displays E2 The top lid is not closed Close the top lid The safety switch acts and the spinning cannot work The digitron displays E3 A
19. ntity of water 2 Add the power Run for 30 seconds to dissolve it completely How to use the whitener 3 Putin the laundries Select suitable water level The instant dissolving of the washing powder 1 Prepare warm water of 30 C and a container 2 Add the powder while stirring to fully dissolve it It is suggested to use liquid detergent when you use QUICK WASH Please add the powder according to the laundry quantity water level and water quantity Fill water to decided level Dilute the whitener with container Pour it slowly into the washing tub Avoid using whitener on laundries with colour or pattern as they are prone to lose colour The whitener shall not touch the laundries directly Refer to the user s manual for the usage and It is suggested not to use high sudsing detergent quantity of the whitener Washing powder with poor quality or not used for a long period may get blocked Please clean the detergent box For powder whitener please dissolve it before use in time Water level water quantity and dosage of the washing powder Common powder Concentrated powder Laundry quantity kg Water level Water quantity add 40g in each 30L water add 30g in each 30L water a About 70L About 93 3g About 58 3g aoe gt About 66L gt About 88g gt About 55g About 60L About 80g D gt About 50g About 54L About 72g About 45g About 48L About 64g gt About 40g About 42L About 56g About 35g A
20. ocedure during washing and can not make setting in other cases The soak program can be used as fitting of normal jeans fibre or cotton automatic programs It will do soaking with intermittent stirring of pulsator 4 Press WATER LEVEL button OF select suitable water level WATER LEVEL After switching on the power the washing machine will execute fuzzy program automatically to detect the cloth After defection it can set the water level automatically To select other water level first push the START PAUSE button then push the WATER LEVEL button to set the water level Refer to water level water quantity and desoge of powder in Page 9 and WATER LEVEL button in Page 11 for selection Water Level and Time Table for Each Program self programming not included Program Wash minutes Rinse minutes Spin minutes Total time minutes Normal About 10 16 Saving water program total about 13 minutes About 25 31 Quick About 5 Saving water program total about 13 minutes About 20 Posthaste About 2 Saving water program total about 4 minutes About 6 Jeans About 20 Rinse twice about 5 each time About 7 About 54 Fibre About 12 Rinse twice about 3 each time About 5 About 40 Cotton About 10 Rinse three times about 3 each time About 5 About 48 Woollen About 3 Rinse twice about 2 each time About 3 About 25 Silk About 5 Rinse twice about 2 each time About 4 About 30 Using process
21. pinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinning in onetime One time washing quantity shall belower than the rated capacity The largest capacity of this machine is 7 0kg The thickness size type ofthe cloth will influence the actual washing capacity It is suitable for one time washing to put in reasonable amount of laundries and the laundries can beturned round in washing Do notselect above 4 water level for laundries small than 1 0kg so as to avoid splashing of water Reference weight of the laundries working suit Cup down cotton about 11209 jeans about 800g blanket cotton about 900g lt 2 blending coat pajamas Cabout 800g Cabout 200g gt jacket shirt F cotton about C cen apout 800g 00g SS single bed sheet ga J Ccotton about 600g undershirt socking cotton about 180g underpants 3 cotton about 70g blending about 50g 2 Usage of the detergent Using process Add the washing powder or softener into the detergent box Washing powder inlet entrance directly as indicated in the left figure After adding washing powder please close the detergent box See to following table for the dosage of the washing powder Softener inlet entrance How to use the washing powder Direct dissolved in the machine not applicable for fuzzy and reserve programs 1 Fill small qua
22. please contact our after sale department immediately 2 Put the nut of the water inlet hose on the valve jointer SZ LS 3 Fasten the nut Swing it gently to confirm if it s suitable jointer of the waterinlet valve water absorption cushion Connection between the jointer of the water inlet hose and the water inlet hose 1 Push down the slider Insert the water inlet hose into the jointer 2 Hang the lock lever to the jointer Release the slider till a click sound is heard Check the connection between the jointer of the water inlet hose and the water faucet 1 Swing the hose gently to confirm if it is fastened stable 2 After installation open the faucet to check if it leaks 3 Do not bend the hose with overstrain 4 Before each usage please check if the connection between the jointer of the water inlet hose and the water faucet and the installation of the water inlet hose are firm so as to prevent dropping from improper installation position Dismantle the water inlet hose 1 Close the water faucet 2 Press the locking lever Push down the slider Then pull of the water inlet hose If the machine is used frequently the jointer of the water inlet hose can be kept on the faucet to prevent damaging the fixing screw Remarks use the new hose sets supplied with the washer Any other old hose sets should not be used 6 1 Preparation before washing Using process Preparation before washing
23. quick posthaste push the SOAK button the machine have no reaction programs push the WASH button the machine have no reaction e Push the RINSE button to set the rinse procedure e During standard and jeans programs push the RINSE button to set different rinse times 0 1 2 3 4 times e During fibre cotton woollen and silk programs push the RINSE button to select rinse procedure but the rinse times can not be changed e During quick posthaste programs push the RINSE button the machine have no reaction e During standard program the machine is set to save water program If you push the RINSE button before starting operation it will change to water storage rinse program e Push the SPIN button to set the spin procedure e During standard and jeans programs push the SPIN button to set different spin time from 0 to 9 minutes e During fibre cotton woollen and silk programs push the SPIN button to select spin procedure but the spin time can not be changed e During quick posthaste programs push the SPIN button the machine have no reaction Child lock function This function is used to protect the children and prevent them from changing the washing procedure Push and hold the WATER LEVEL button and SPIN button then push down the POWER ON OFF button The digitron displays CL You can continue setting desired washing procedures After setting push down
24. re the laundries put slantingly e Is the machine slanting e Reorder the laundries Close the top lid e The machine will start running after 10 seconds of being placed horizontally The water filling does not work or is slow After about 15 minutes later the digital displays E4 e Is the water tap opened or is there water supply failure e Is the water inlet valve blocked e Is the water pressure too low Open the water tap Open and close the top lid once e Clean the water inlet valve then open and close the top lid once Open and close the top lid once The digitron displays E6 The water level sensor is bad Please contact the after sales service department The digitron displays E8 The power voltage is too low The digitron displays E9 e The power voltage is too high Pull off the power plug Wait for the voltage resuming normal before usage Not wash The machine does e Is there power failure Is the power plug inserted tightly e Is the water level reached preset position e Please use it when there s power supply e Insert the power plug tightly e Fill water to the preset position not act Not spin Is the power plug inserted tightly Is the top lid closed reliably Are the laundries set flat e Insert the power plug tightly e Close the top lid Set the laundries flat There s abnormal sound inside the machine Is the mac
Download Pdf Manuals
Related Search