Grundig Color Television Vision 6 32-6840 T User's Manual
Contents
1. Note Channels can be enabled again Press sV amp or A to select the channel press to switch to the symbol Q and press s to enable the channel again Ending the settings 1 Press i to finish the settings ENGLISH QI SETTINGS PICTURE Picture Mode Vivid Brightness Contrast Colour Sharpness Colour Temperature Medium GRUNDIG Back Exit DA 8 9 8 Select PICTURE NR Vibrant Colour Perfect Clear Dynamic Contrast ii Dynamic Backlight Backlight SREE 100 Back r gt oe Select en 16 2 Picture settings Open the menu with sie The PICTURE menu is displayed Select Picture Mode Brightness Contrast Colour Sharpness or Colour Temperature with W or A Select the value with or sF amp and confirm with Notes Other settings can be found on the second page of the PICTURE menu Switch to the second menu page with w and confirm Advanced Picture Settings with Select DNR Mpeg NR Vibrant colour sPerfect Clear Dynamic Contrast Dynamic Backlight or Backlight with W or DANS Select the value with or sF amp and confirm with Notes You can only select the Mpeg NR function on digital and AV presets Mpeg NR reduces any interference from artefacts pixel blocks from digital stations with MP2. A and press to confirm 6 Press six to end the setting Resetting the television to its original state This function enables you to delete the station lists and all custom settings 1 Select Restore Factory Defaults with w oder A and press to confirm 2 Select the Yes amp button with or and confirm the reset function with The Installation Guide menu is displayed 3 Continue the settings as described in the chapter on searching for television stations on page 13 CONVENIENCE FUNCTIONS OPTIONS Language Settings Restore Factory Defaults Country Deutschland Game Mode Software Update SPDIF Output PCM Language Setings J a Come mode OF 5 mee G Back ev 8 Select 9 Exit OPTIONS Language Settings gt Restore Factory Defaults gt Country Deutschland Game Mode ii GRUNDIG Software Update SPDIF Output PCM Back ev oe Select He Game mode This function is only available for preset channels HDMI1 HDMI2 HDMI3 YPBPR or PC Use this function to adjust the screen settings of the television set for games Connect the games console using the HDMI1 HDMI2 HDMI3 gt COMPONENT INPUT VIDEO IN Y Pb Prk or PC IN VGA sockets You can no longer make settings in the PICTURE menu 1 Select Game Mode with W or A 2 Press or to switch the functio
3. HDMI3 socket on the television and the corresponding HDMI socket on the external device using a standard HDMI cable digital video and audio signal ENGLISH Gd N USING EXTERNAL DEVICES COMPONENT INPUT Pr Y Pb anes IN R SPDIF OUT 38 With an analogue video signal progressive Video signal YUV resolution standard 576p HDTV 720p 1080i Audio signal stereo analogue Channel position YPBPR 1 Connect the gt COMPONENT INPUT Y Pb Pr sockets on the television and the corresponding sockets on the external device using cinch cables video signal 2 Connect the gt COMPONENT INPUT AUDIO IN L Rk sockets on the television to the corresponding sockets on the external device using cinch cables audio signal Using the Euro AV socket Video signal FRAS RGB Audio signal stereo analogue Channel position SCART 1 Connect the SCART socket on the television and the corre sponding socket on the external device using a EURO AV cable video and audio signal With S Video signal Video signal Y C Audio signal stereo analogue Channel position S Video 1 Connect the S WHS socket on the television and the corre sponding socket on the external device using an S Video cable video signal 2 Connect the L R sockets on the television to the corresponding sockets on the external device using cinch cables audio signal With an analog TV signal V
4. access to channels of the PAY TV provider The remaining settings are described in the manuals for your CA module and smart card 4 Press i to finish the settings ENGLISH A de CHANNEL SETUP Auto Tuning Digital Manual Tuning Analogue Manual Tuning Programme Table Signal Information Signal Information skip Exit Frequency 578 MHz ALA CA Module Not Inserted Active Antenna Power On ev 8 9 9 Select Back Exit v Searching 0000000000000000 d 57 UHF CH49 DTV pTv ZDE ptv ZDFinfokanal DIV SAT 1 DIV N24 DTV ProSieben DTV Kabel eins Digital Manual Tuning UHF CH Poor 34 Normal Good 0000000000000000 169 Select Back Exit SPECIAL SETTINGS Tuning digital television stations This search deletes all television stations included in the channel list GRUNDIG Tuning all digital television stations using the search 6 Open the menu with sie The PICTURE menu appears Select the CHANNEL SETUP menu with or Select Auto Tuning with w or A and confirm with Select Country Selection by pressing W or A and press or yt to make the setting Select the Scan Type with w Press or to select the DTV display and start the search with The Searching menu appears and the search for digital TV stations begin
5. 8 Select Close with W or A and press x to confirm 9 Press i to end the setting ENGLISH ba TIMER Clock 19 Jun 2008 14 35 Off Time ii On Time ii Sleep Timer Off Auto Sleep Off Time Zone Berlin GMT 1 TIMER Clock 19 Jun 2008 14 35 Off Time Off On Time Off Sleep Timer ii Auto Sleep Off Time Zone Berlin GMT 1 Back Ee 8 Select 9 Exit TIMER Clock 19 Jun 2008 14 35 Off Time ii On Time Oi Sleep Timer Oi Auto Sleep hii Time Zone Berlin GMT 1 Back Exit ev 8 9 8 Select 30 CONVENIENCE FUNCTIONS Enter the switch off time Sleep Timer In the Sleep Timer menu you can enter a time for the television to switch off After this time has elapsed the television switches to standby mode 1 Select Sleep Timer with W or A 2 Select the switch off time with or Note Switch off the function by pressing or to set it to Off 3 Press i to end the setting Automatic switch off Auto Timer If this function is activated the television switches off after 5 minutes on stand by if no video signal is transmitted 1 Select Auto Sleep with W or A 2 Press or vt to switch the function On Note Switch off the function by pressing or to set it to Off 3 Press i to end the setting Setting the time zone The television automati
6. Creating a list of favourites You can select your favourite channels and save them in up to four lists FAV1 to FAVA 2 In the Programme Table menu select the television channel with W or A Push the television channel with or into the favourites list 1 to 4 and save it with The position in the favourites list is marked with You can enter the same channel in more than one favourites list Note You can delete channels from the favourites list Press W oder A and or to select the channel and to delete it Concluding the settings Press i to finish the settings INFORMATION Displaying signal information CHANNEL SETUP Auto Tuning Digital Manual Tuning Analogue Manual Tuning Programme Table Signal Information CA Module Not Inserted Active Antenna Power On gt GRUNDIG Back ev so Select 2 El only for digital television channels 1 Open the menu with sie The PICTURE menu appears 2 Select the menu CHANNEL SETUP with or F 3 Select Signal Information with w or A and press to confirm You will see information on the channel modulation quality and signal strength Notes The lower section of the menu shows the signal properties The further the bar for Quality and Signal Strength extends to the right the better the reception signal The
7. SPDIF Output PCM Back TR so Select 2 OPTIONS Language Settings English U Audio Languages English 2 Subtitle Languages English Hard of Hearing ii z ey Back to Select F R Exit OPTIONS Restore Factory Defaults gt Country Deutschland Game Mode Software Update SPDIF Output PCM 2 Vv GRUNDIG Back Exit Ee 8 9 8 Select 26 1 Open the menu with sie The PICTURE menu is displayed 2 Select sOPTIONS with or and press to confirm Note Additional operations are explained in the following sections Changing the menu language 1 Select Language Settings with w oder A and press to confirm 2 Select Language Settings with w oder A 3 Select the language with or 4 Press i to finish the setting Language settings only for digital television channels You can alter the appearance of subtitles or disable them select the subtitle language select a second subtitle language and select the audio language and a second audio language 1 Select Language Settings with w or A and press s to confirm 2 Select Audio Languages Subtitle Languages Hard of Hear inge with W or A and press x to confirm 3 Select Primary or Secondary with w or A and press to confirm 4 Press or to make the setting 5 Select Close with W or
8. 1 DB O as DE W 1 Press sP to call up the overview of channel lists The overview is displayed D 2 Press W or A to select the channel list and to confirm 3 Press W or A to select the channel and to confirm Selecting AV channels 1 Call up the INPUT SOURCE menu with AV 2 Select the desired AV channel position with w or A and press x to confirm 3 Switch back to the television channel with 1 0 Switching between digital and analogue channels 1 Open the INPUT SOURCE menu by pressing AV 2 Press W or A to select DTV digital presets or ATV analogue presets and press to confirm Adjusting the volume 1 Adjust the volume with or sa GRUNDIG Muting 1 Use sd to switch the sound off mute and to switch it on again Displaying time 1 You can display the time by pressing the O button TELEVISION OPERATION Displaying information 1 Press to display the information The display disappears automatically after a short while Freeze frame If you wish to view a particular scene for longer you can freeze the frame of the current programme 1 Press slllk yellow 2 To quit this function press slllk again Picture settings You can select different picture settings 1 Select the desired picture setting from User Sports Movie Natural or Vivid with You
9. 26 approx 11 8 kg Vision 32 Service information for dealers The television set may only be operated with the mains adapter sup plied The product complies with the following EU directives 2006 95 EG directive for electrical equipment to be used within defined voltage ranges 2004 108 EG directive on electromag netic compatibility The device complies with the following standards EN 60065 EN 55013 EN 55020 EN 55022 EN 55024 Environmental note This product has been made from high quality parts and materials which can be re used and recycled Therefore do not throw the product away with normal household waste at the end of its life Take it to a collection point for recycling electrical and electronic devices This is indicated by this symbol on the product in the operating manual and on the packaging Please find out about collection points operated by your local authority Help protect the environment by recycling used products Technical changes and errors reserved INFORMATION Troubleshooting If the remedies given below do not work please consult an autho rised GRUNDIG dealer Please bear in mind that malfunctions can also be caused by external devices such as video recorders or satel Fault lite receivers Possible cause Remedy Screen lit snow but no station Poor picture contrast Interference to picture and or sound Antenna cable No television station pro grammed Picture
10. can alter the User picture setting see the Picture settings chapter on page 16 Sound settings You can select various audio settings when watching analogue channels 1 Select User Speech Movie Sports Music or by pressing blue You can modify the User audio setting see the Equaliser chapter on page 18 Audio language You can select various languages when watching digital channels This depends on the programme being broadcast 1 Press sJ blue to open the selection menu 2 Select your language using W or A and press x to confirm Subtitles You can select various subtitles when watching digital channels This depends on the programme being broadcast 1 Open the selection menu with S 2 Select your language using W or A and press x to confirm Zoom function With this function you can enlarge the picture on the television or computer 1 Activate the zoom function by pressing and holding down SCAN ENGLISH N mal 22 TELEVISION OPERATION Zap function This function allows you to save the television channel which you are currently watching and switch to other channels zapping Select the channel you want to save in the zap memory with 1 0 or A V e g channel 1 BBC 1 and save by pres sing Z Change channels with 1 0 or A W You can now use Z to switch between the sav
11. delete all the channels Sorting television channels 1 In the sProgramme Table menu select the channel to be moved with with W A or ske 2 Highlight the channel with O green 3 Select a new channel position by pressing A W or and then press to confirm All of the channels that follow move up one position Note To sort the other television channels repeat steps 1 to 3 Entering the channel names maximum of 5 characters 1 In the Programme Table menu select the desired channel with DAK Va gt or OF 2 Highlight the channel with red 3 Select letters or numbers with A or W move to the next position with or and repeat 4 Store the channel name with ENGLISH Note To enter additional channel names repeat steps 1 to 4 A N 48 SPECIAL SETTINGS Skipping television channels You can highlight television stations to be skipped when you select with A or W It is still possible to select using the number buttons 2 In the Programme Table menu select the desired channel with PAS W K gt OF ORK Press sF to switch to the Q symbol and press to highlight the television channel The channel is marked with Q Note Channels can be enabled again Press W or A to select the channel press to switch to the symbol s and press to enable the channel again
12. difficulty reading the text on the screen you can double the character size 1 To enlarge the character size of a teletext page press SCAN repeatedly TELETEXT MODE Page stop A multiple page may contain several sub pages which are auto matically scrolled by the transmitting station 1 Stop the sub pages with P 2 Press P to quit the function Calling up a sub page directly If the selected teletext page contains further pages the number of the current sub page as well as the total number of pages is displayed 1 Call up the sub pages with S 2 Press 1 0 to enter the sub menu 3 Press S to quit the function Reveal answer DB DN DE OY OH W Certain teletext pages contain hidden answers or information which can be called up D 1 Display information with 2 Conceal information with 2 Split screen Split Screen With this function you can see the television channel on the left and the teletext page on the right 1 To activate the split screen function press PAT The television channel and the teletext page appear next to each other on the screen 2 To deactivate the split screen function press PAT GRUNDIG ENGLISH hd vi CONVENIENCE FUNCTIONS Convenience functions OPTIONS Language Settings Restore Factory Defaults Country Deutschland Game Mode 2 Vv GRUNDIG Software Update
13. from standby Station selection Select a function in the menu Open the pre selection for AV channels In the menu press P or P to select and confirm with V or V Opens the main menu Select menu item with P or P Activate the function with V or V Set the function with V or V Switch off the menu with MENU Adjust the volume Select menu functions Switches the television on and back into standby The only way to disconnect the television from the mains supply is to pull the plug 29009 TOO GRUNDIG OVERVIEW The remote control Switches off the television set stand by Switches the television on from standby mode Selects channels directly Opens the pre selection for AV channels and the USB input Then select with W or A Displays the number and name of a station reveals answers in teletext mode Updates the page in teletext mode Switches between picture formats Sound on off mute Opens the menu Zapping function switches the menus back one menu level Switches the television on from standby selects stations step by step moves the cursor in the menus up and down Calls up the channel list activates various functions Adjusts the volume moves the cursor left right Switches between teletext and TV modes Opens the electronic TV guide Selects various picture settings selects a page in teletext mod
14. it is necessary to change the fuse in the non rewireable plug the cor rect type and rating 5A ASTA or BSI approved BS1362 must be used and the fuse cover must be refitted If the fuse cover is lost or damaged the lead and plug must not be used until a replacement is obtained Re placement fuse covers should be obtained from your dealer Important The wires in the mains lead are colour coded in accordance with the fol lowing code BLUE NEUTRAL BROWN LIVE As the colours of the wires in the mains lead of your appliance may not correspond with the coloured marking identifying terminals in your plug proceed as follows Connect the BLUE coloured wire to plug terminal marked with the letter N or coloured black Connect the BROWN coloured wire to the plug terminal marked with the letter L or coloured red In no circumstance must any of the wires be connected to the terminal marked with the letter E earth symbol 7 coloured green or green amp yellow Grundig Multimedia B V Atrium Strawinskylaan 3105 e NL 1077 ZX Amsterdam http www grundig com 09 14
15. regarded as a defect as defined by the warranty Notes Do not connect any other equipment while the device is switched on Switch off the other equipment as well before connecting it Only plug the device into the mains socket after you have con nected the external devices and the antenna Make sure the power plug is freely accessible Caution If you want to use a wall bracket for your television make sure you read the assembly instructions for the wall bracket carefully or have your specialist dealer mount it for you When buying the wall bracket make sure that all the fastening points needed on the television are there on the wall bracket and that they are all used when it is mounted ENGLISH Gi HD GENERAL INFORMATION Special features of your television Your television set enables you to receive and watch digital stations via DVB T including in High Definition HD At present reception for these digital television stations in High Defi nition is only possible in some countries in Europe This television can receive and process all analogue and all unencrypted digital stations This television set has an integrated digital and analogue receiver The digital receiver unit converts the signals from digital stations to provide outstanding audio and picture quality The TV guide only for digital stations tells you of any schedule changes at short notice and provides an overview of all the stations schedul
16. BG Current Channel Fine Tuning a gt Search 4 gt Programme No Skip Yes Frequency 443 25 MHz Save Back Exit AA d g os Select Analogue Manual Tuning System Current Channel Fine Tuning Search Programme No Skip 46 SPECIAL SETTINGS Tuning the analogue television channels by entering the channel numbers 9 Open the menu with i The PICTURE menu appears Select the CHANNEL SETUP menu with or sFa Select Analogue Manual Tuning with sV amp or A and press to confirm Select the Programme Nox by pressing W or A and press or st to set the preset Select Current Channel with W or A Press to choose between S special channel or C channel Enter the channel number with or step by step or with 1 0 directly Note The current system is displayed in the System line If the colour and or sound is not functioning correctly select System with W or DANE Select the necessary settings with or Press red to finish the setting Note To set other television stations repeat steps 4 to 8 Press i to end the setting Fine tuning analogue television stations The television automatically tunes itself to the best possible recep tion You may need to fine tune it manually in areas where the re ception is poor Select st
17. EG compression such as from DVB T receivers or DVD players Dynamic Contrast the contrast adjusts according to the picture content to ensure optimum contrast Dynamic Backlight backlighting adjusts according to the pic ture content fo ensure optimum contrast You can only change the backlighting if the Dynamic Backlight function is switched off 5 Press i to end the setting SETTINGS Audio settings SOUND Volume Balance AVL Sound Type Sound Mode Equalizer Headphone N EES Back ev so Select Bai SOUND Volume N Balance AVL Sound Type Stereo O Sound Mode Normal y a Sound Type Stereo Z JG SoundMode Normal J Equalizer CC N U Equalizer N ES Headphone Back ev 809 Select Bci SOUND N Volume Balance AVL Sound Type Sound Mode Equalizer GRUNDIG Headphone N Back Exit ev 8 9 8 Select 1 Open the menu with sie The PICTURE menu is displayed 2 Select the SOUND menu with or F and confirm with O Note Additional operations are explained in the following sections Volume 1 Select Volume with w or A and adjust the setting with OF Fa Balance 1 Select Balance with w or A and adjust the setting with y OF Pa Automatic volume The television channels broadcast at different volumes
18. GRUNDIG made for you COLOR TELEVISION VISION 6 26 6840 T VISION 6 32 6840 T de en fr Cit O oNN ooo A NO GE CONTENTS SET UP AND SAFETY GENERAL INFORMATION Special features of your television Receiving digital stations What is Common Interface CONNECTION PREPARATION Connecting the antenna and the mains cable Inserting batteries in the remote control OVERVIEW Connections on the television Controls on the television The remote control SETTINGS Searching for television stations Changing stored channels for digital stations Picture settings Audio settings TELEVISION OPERATION Basic functions Zoom function Zap function Electronic TV guide Changing the picture format TELETEXT MODE TOP text or FLOF text mode Normal text mode Additional functions CONVENIENCE FUNCTIONS Convenience functions Parental control Timer functions USB MODE The file formats Connecting external data media The file browser Settings in the USB setup menu Playback Basic functions Additional playback functions CONTENTS USING EXTERNAL DEVICES DVD player DVD recorder video recorder or set top box High definition HD ready Connecting a DVD player DVD recorder video recorder or set top box Headphones Decoder or satellite receiver Camcorder Hi fi system AV receiver PC MONITOR MODE Connecting a PC Selecting the channel position for the PC Settings for the PC OPERATION W
19. ITH COMMON INTERFACE Inserting the CA module Access control for CA module and smart card SPECIAL SETTINGS Tuning digital television stations Tuning analogue television stations Changing stored channels for analogue stations INFORMATION Displaying signal information Updating software Technical data Service information for dealers Environmental note Troubleshooting Additional Information for units sold in the UK ENGLISH G SET UP AND SAFETY Please note the following information when setting up your television set This television set is designed to receive and display video and audio signals Any other use is expressly prohibited External light falling on the screen impairs picture quality To assure sufficient ventilation make sure there is enough space around it in the wall unit The television set is designed for use in dry rooms If you do use it in the open please ensure that it is protected from moisture such as rain or splashing water Do not expose the television set to any mois ture Do not place any vessels such as vases on the television as they may spill liquid thus presenting a safety risk Place the television set on a solid level surface Do not place any objects such as newspapers on the television set or cloth or similar items beneath it Do not place the television set close to heating units or in direct sun light as this will impair cooling Heat build up can be dangerous and s
20. TAL CONTROL Lock System Off Set PIN gt Block Programme gt Parental Guidance 4 Panel Lock Sj GRUNDIG Back Exit ev 8 9 8 Select PARENTAL CONTROL Lock System Set PIN Block Programme gt Parental Guidance 4 Panel Lock ii GRUNDIG Back ev so Select Bni PARENTAL CONTROL ie Lock System Set PIN Block Programme Parental Guidance je a Panel Lock GRUNDIG Back Exit ev 8 9 8 Select PARENTAL CONTROL Lock System eg Set PIN Block Programme Parental Guidance Panel Lock GRUNDIG Back Exit LAJ 8 9 8 Select 28 Changing the PIN code Instead of the default code 0000 you can enter a personal code Please take note of your personal code 1 Select Set PIN with w or A and press to confirm 2 Enter your new personal PIN code with s1 O in four digits 3 Enter your personal PIN code again with s1 O and press to confirm 4 Press i to end the setting Block a television channel You can block individual television channels which are not suitable for children using a personal PIN code 1 Select sBlock Programme with w or A and press to confirm The channel list is displayed 2 Select the television channel in the Programme Table with w or A and press O green to confirm The fa symbol is displayed in front of the channel in th
21. The automatic volume limiting AVL function means the volume is kept the same when you switch between channels 1 Select AVL with w or A and then select On with or F Note Ifthe SRS setting has been selected in the Sound Mode line the AVL line cannot be selected Stereo two channel mono If the device receives two channel programmes e g a film with the original sound on sound channel B display Dual Il and the dubbed version on sound channel A display Dual I you can select the sound channel you desire If the device receives stereo or Nicam programmes it switches automatically to stereo sound display Stereox You can switch the sound to Mono if the stereo reception quality is poor 1 Select Sound Type with W or A and adjust the setting with OF ska Stereo width Widens the audio output for stereo programmes and improves the sound with mono reception 1 Select Sound Mode with W or A 2 Press or t to select the setting Spatial ENGLISH S SETTINGS SRS TruSurround XT SRS TruSurround XT is a patented audio technology which is inte grated in the television set and only requires the builtin speakers to produce a Surround Sound effect SOUND Volume N j Balance AVL Sound Type Stereo Sound Mode Normal ie 1 Select the Sound Mode line with Ww or A GRUNDIG Eq
22. and hold down M and press three number buttons to enter the code 1 2 3 for a GRUNDIG DVD player 4 5 6 for a GRUNDIG DVD recorder 1 4 7 for a GRUNDIG digital receiver remote control level 1 2 5 8 for a GRUNDIG digital receiver remote control level 2 3 6 9 for a GRUNDIG digital receiver with a hard disc PDR SETTINGS Searching for television stations The television has an automatic tuning function which first searches for digital TV channels and then analogue ones Installation Men sprache Deutsch Aktivantenne Aus Programmsuchlauf gt ev to 8 Ausw hlen er Installation Guide Language Settings English Active Antenna Power ii Auto Tuning gt 309 Select Exit er Please select country and scan type then press OK to start tuning Country Selection Scan Type Time Zone Searching 0000000000000000 J 57 UHF CH49 DTV ptv ZDF ptv ZDFinfokanal SAT 1 N24 ProSieben kabel eins Skip Exit You start the search and can then sort the television stations into your order of preference There are 400 presets for digital channels and 99 for analogue channels to which you can assign TV stations from the antenna or from the cable connection analogue channels 1 Press 1 0 or W or A to switch on the television from standby mode The Installatio
23. ations with s1 O directly or step by step with w or MANE Open the menu with i The PICTURE menu appears Select the CHANNEL SETUP menu with or sFa Select Analogue Manual Tuning with w or A and press to confirm Select Fine Tuning with W or A and set with or sa Press 78 gt red to finish the setting Press i to end the setting SPECIAL SETTINGS Changing stored channels for analogue stations If channels were stored with the automatic channel search during the tuning of the television channels you can delete them You can also store stations in a different preset change or enter the name of a stations as well as skip channels Select channel lists 1 Open the menu with sie CHANNEL SETUP The PICTURE menu is displayed EDS 2 Select the gt CHANNEL SETUP menu with s or and con firm with Digital Manual Tuning Analogue Manual Tuning Programme Table y n a5 r U 3 Select sProgramme Table with w or A and press s to EE OON Active Antenna Power On gt s oa Note Select eye B J see Ext Additional operations are explained in the following sections Deleting channels 1 In the Programme Table menu press W or A to select the channel to be deleted and press slik yellow to confirm 2 Press sO green to confirm the deletion Note Press gt red to
24. cally detects the local difference to Green wich Mean Time the selected channel provides a time signal You can set the local time difference yourself if the time is not detected or is not the same as your local time 1 Select Time Zone with w or A 2 Set the time zone with or in Germany 1 00 hour 3 Press i to end the setting USB MODE The file formats Your television can be operated via the USB input with the following file formats MP4 video data The MP4 process was designed to compress video files An MP4 video is an encoder decoder based on the MPEG 4 com pression system which is used to decrypt and display compressed video data This enables the televsion to play back videos compressed in the MPEG 4 SP format MPEG 4 SP files are packaged with the audio data which have been compressed using MP3 AAC or Dolby Digital in this AVI or MP4 file MP3 WMA audio data MP3 stands for MPEG 1 Audio Layer 3 and comes from the Motion Picture Expert Group MPEG standard which was developed for compressing audio and video data WMA is a compression standard for audio data Windows Media Audio These formats enable audio files to be saved on a computer with a sound quality similar to that of a CD MP3 files can be organised into folders and subfolders similar to files on a computer JPEG picture data JPEG stands for Joint Picture Experts Group This process was
25. de signed to compress picture files JPEG files can be saved onto a data medium along with other file types The files can be compiled in folders This structure is similar to that of an MP3 CD ENGLISH id 32 USB MODE Connecting external data media Before connecting the data medium switch the television to stand by with Connect the device and then switch the television on again Before connecting the data medium the television must first be switched to standby otherwise files can be damaged 1 Connect the USB interface USB of the television and the corresponding socket on the data device external hard drive digital camera card reader or MP3 player using a USB cable or plug the memory stick into the USB interface USB of the tele vision Note A bi directional data transfer as defined for ITE Information Technology Equipment devices in EN 55022 EN 55024 is not possible USB transfer is not in itself an operating mode It is only an addi tional function USB MODE The file browser The file browser displays the data AVI JPEG MP3 MP4 or WMA data that the external data medium offers If a data medium contains different file formats you can deactivate data you do not need for the playback using a filter function All Supported Text Movie Music Photo The main menu of the file browser pHs CA S N Bilder 1 Musik 1 7 Musik 2 6 Filme Se
26. e Displays the time selects a page in teletext mode Freeze frame selects a page in teletext mode Selects different sound settings in analogue TV operation selects different languages in digital TV opera tion selects desired topic in teletext mode ENGLISH 12 DO DB o DEG OOOG 9 9 o 29009 QO OO GRUNDIG OVERVIEW SCAN Enlarges the picture switches to double character size in teletext mode Selects the split screen function in teletext mode Selects different subtitles in digital TV operation selects subpages in teletext mode Selects channel lists All Channels RADIO FAV1 to FAVA page hold in teletext mode Switches to operation of a GRUNDIG digital receiver GRUNDIG digital receiver with hard disk PDR GRUNDIG DVD player GRUNDIG DVD recorder or GRUNDIG AV receiver Press M until the DR DVD or AMP display lights up Then select the one you want If you do not press a button within 10 seconds the remote control returns to television mode TV Note DR has been programmed for operating a GRUNDIG digital receiver remote control level 1 DVD has been programmed for operating a GRUNDIG DVD player AMP has been programmed for operating a GRUNDIG AV receiver The functions available depend on the model of the device you are using Just try it out You can change this programming Press
27. e Pro gramme Table 3 Press i to end the setting Note Press W or A to release the channel and switch off the block by pressing O green Authorise channels There are movies which contain contents or scenes which are not suitable for children Certain programmes contain information which identifies these contents or scenes and have been given an access level from 4 to 18 You can select one of the access levels and thus authorise the playback 1 Select Parental Guidance with W or A 2 Select the access level with or sa 3 Press i to end the setting Blocking the control panel parental control If the control panel block is activated the buttons on the television do not work 1 Select Panel Lock with w or A 2 Activate On or deactivate Off the panel block with or F 3 Press i to end the setting CONVENIENCE FUNCTIONS Timer functions 1 Open the menu with sie WE The PICTURE menu is displayed GE oF 2 Select the TIMER menu with or and press to confirm Auto Sleep Off Notes Time Zone Berlin GMT 1 The correct time is shown in Clock Additional operations are explained in the following sections Switch off timer In the Off Time menu you can enter a switch off time for the tele vision The television switches off after the entered time has elapsed in stand by 1 Select Off Ti
28. e frequency 60Hz This is a Class A product During operation the device can cause radio interference In this case the user may have to remedy this Please contact your specialist dealer ENGLISH Si 52 INFORMATION Additional Information for units sold in the UK Units sold in the UK are suitable for operation from a 240V ac 50Hz mains supply The range of multi system receivers is built to work in most European countries However the mains plug and socket system for the UK differs from many European countries This appliance has been supplied with a fitted non removable approved converter plug for use in the UK This converter plug is fitted with a 5A rated fuse In case this appliance is supplied with a moulded 2 pin Euro plug only which is unsuitable for UK operation this must be cut off and immediately disposed of An approved 13A 3 pin UK plug should then be fitted by a qualified electrician Note The severed Euro plug must be destroyed to avoid a possible shock hazard should it be inserted into a socket elsewhere If a non rewireable 3 pin plug or a rewireable 13A BS1363 3 pin plug is used it must be fitted with a 5A ASTA or BSI approved BS1362 fuse If any other type of plug is used it must be protected by a 5A fuse either in the plug or at the distribution board If this type of plug becomes defec tive ensure that the fuse is removed before disposal to eliminate poten tial shock hazard If
29. ecorder video recorder or set top box Note Which television socket s you connect your external devices to depends on the sockets the external device is equipped with and the signals which are available Note that with many external devices the resolution of the video signal must be adapted to the input sockets on the television check the external device s instruction manual You can find out which values you need to set by referring to the guidelines in the section about connection options Note Do not connect any other equipment while the device is switched on Switch off the other equipment as well before connecting it Only plug the device into the mains socket after you have connected the external devices High definition HD ready Your television can playback high definition television signals HDTV You can connect the input sources HDTV set top box or High Definition DVD player to the sHD Ml socket digital HDTV signal This ensures that you can view digital HDTV programmes even if they are copy protected HDCP High Bandwidth Digital Content Pro tection Connecting a DVD player DVD recorder video recorder or set top box With a digital audio video signal Video signal digital video resolution standard 576p HDTV 720p 1080i Audio signal digital audio stereo multi channel compression uncompressed Channel position HDMI1 HDMI2 or HDMI3 1 Connect the HDMI1 HDMI2 or
30. ed channel in the example BBC1 and the channel you were watching before Press si to quit the zap function The display disappears Electronic TV guide The electronic program guide offers an overview of all programmes that will be broadcast in the next week for digital stations only Press T V G to see programme information Notes Not all stations supply provide a detailed TV guide Many broadcasters supply the daily programme but no detailed descriptions There are broadcasters which do not provide any information at all Select the television station with W or A The programmes being shown on the selected television channel for today are displayed In addition information about the programme currently being transmitted is displayed with detailed information Press F to switch to today s programme Note You can open and switch off extensive programme information with da Press W to select information on the next programme and A to return to the information for the current programme Press O green to select the next days and gt red to return to today Switch back to the station selection by pressing Note Press sc blue and to transfer the selected programme into the memory timer Press i to quit the electronic programme guide TELEVISION OPERATION Changing the picture format The television automatically switches to the 16 9 fo
31. elected The picture geometry is stretched horizontally ENGLISH N GQ 24 e 8 J gt oz OES DB MIO OOOG D op GRUNDIG TELETEXT MODE TOP text or FLOF text mode 1 2 N OU Bo Press TXT to switch to teletext mode You can directly select teletext pages with 1 0 To return to page 100 press i Note At the bottom of the screen you will see an information line con sisting of a red green and depending on the station yellow and blue text field Your remote control has buttons with the corre sponding colours Press 78 gt red to scroll back a page Press green to scroll to the next page Press slllk yellow to select chapters Press 7 blue to select topics Press TXT to switch off teletext mode Normal text mode Press TXT to switch to teletext mode You can directly select teletext pages with 1 0 To return to page 100 press i Press W to scroll back a page Press A to scroll to the next page Press TXT to switch off teletext mode Additional functions Skipping the waiting time While a page is being searched for you can switch to the television channel 2 Enter the teletext page number using 1 0 and then press PIP As soon as the page is found the page number is displayed Press PIP to switch to the teletext page Increasing character size If you have
32. eo cable 2 Connect the white and red sockets L R on the television and the corresponding sockets on the camcorder with a cinch cable audio signal Note There must not be video signals at Video and S VHS sockets at the same time This could lead to picture disturbances Operating with a camcorder 1 Switch on the camcorder insert a cassette and start playback 2 Press AV select the AV or S Video channel with W or A and press to confirm Hi fi system AV receiver Connecting the hi fi system AV receiver I JE OGC 1 Connect the socket SPDIF OUT on the television to the corre sponding socket on the AV receiver using a cinch cable digital audio signal R__SPDIF OUT ENGLISH PC MONITOR MODE Connecting a PC 1 Connect the socket sPC IN VGA on the television to the corre sponding socket on the PC using a VGA cable 2 Connect the socket PC AUDIO IN on the television to the corresponding socket on the PC using a cinch cable audio signal PC AUDIO IN ANT Note Adjust your PC to the monitor for example picture resolution 1280 x 768 picture frequency 60 Hz Selecting the channel position for the PC 1 Press AV select the PC channel with w or A and press to confirm Settings for the PC 1 Open the menu with sie The PICTURE menu is displa
33. es including those which contain no heavy metal may not be disposed of with household waste Please dispose of used batteries in an environmentally sound manner Find out about the legal regulations which apply in your area GRUNDIG 1 D asn y O 4 O OVERVIEW Connections on the television O Ee COMPONENT INPUT E p PC IN AUDIO IN VGA L R SPDIF OUT USB L R S VHS Video AN ta Cl HDMI3 HDMI2 HDMI COMPONENT INPUT Y Pb Pr AUDIO IN LR SPDIF OUT PC IN VGA PC AUDIO IN ANT IN SCART AC IN PC AUDIOIN ANT IN USB socket for external data media Audio signal input for camcorder Video signal input for S Video camcorder Video signal input for camcorder Headphone connection 3 5 mm jack plug Common Interface slot HDMI socket audio video signal input HDMI HDMI socket audio video signal input HDMI HDMI socket audio video signal input HDMI Video signal input YUV signal Audio signal input YUV signal Audio output sockets coaxial for PCM AC3 signals For connecting to a digital multi channel audio video amplifier or AV receiver VGA socket video signal input for PC Audio signal input for PC Antenna socket Euro AV socket FBAS signal RGB signal Socket for the mains cable ENGLISH OVERVIEW Controls on the television P P MENU V V O I 10 Switch the television on
34. es for the next few days Detailed information on the individual stations if it is provided by the broadcaster is also available in the electronic programme guide You can connect various data media for example an external hard drive a USM memory stick or a digital camera to the USB socket Using the file browser you can then select and play the file formats you want for example MP4 MP3 or JPEG data Receiving digital stations To receive digital stations you need a digital rooftop or indoor an tenna passive or active indoor antenna with its own power supply Unlike analogue broadcasting not every station has its own trans mission frequency Instead several stations are grouped into what are known as bouquets on a regional or national level You can find the current transmission information on teletext from var ious broadcasters or look in a TV guide or on the Internet What is Common Interface Common Interface Cl is an interface for DVB receivers Encoded stations can only be viewed with a CA module suitable for the encoding system and the corresponding smart card The television set is equipped with a Common Interface slot into which CA modules from various providers can be inserted You can insert the provider s smart card into the CA module in order to enable the encrypted stations you want to see CONNECTION PREPARATION Connecting the antenna and the mains cable 1 Plug the cable of the rooftop
35. estore Factory Defaults Country Deutschland Game Mode GRUNDIG 40 Decoder Settings SPDIF Output PCM Back Exit ev 8 9 9 Select In order for the television to receive encoded programs from a privately operated station a decoder is needed Connecting a decoder or satellite receiver Decoder 1 Connect the SCART socket on the television set and the ap propriate socket on the decoder using a EURO AV cable Using a decoder or satellite receiver 1 Switch on the television and the decoder or the satellite receiver 2 Press AV select the channel SCART with w or A and press to confirm Activating the preset for a decoder If this function is activated the decoder connected to the SCART socket provides a decoded audio video signal 1 Open the menu with sie The PICTURE menu is displayed Select OPTIONS with or and press s to confirm Select the Decoder Settings with W or A Press or st amp to switch the function On U A Q N Press i to end the setting USING EXTERNAL DEVICES Camcorder Connecting the camcorder 1 Connect the yellow socket Videox on the television and the corresponding socket on the camcorder VHS Video 8 with a cinch cable picture signal or connect the S WHS socket picture signal on the television and the corresponding socket on the camcorder S VHS Hi 8 with a S Vid
36. hortens the operating life of the television set For reasons of safety have a specialist remove any dirt deposits in the set from time to time Do not open the television set under any circumstances Warranty claims are excluded for damage resulting from improper handling Make sure the power cord or the power supply unit if provided are not damaged The television set may only be operated with the mains cable adapter supplied Thunderstorms are a danger to all electrical devices Even if the television set is switched off it can be damaged by a lightning strike to the mains or the antenna cable Always disconnect the mains and antenna plugs during a storm Clean the screen with a soft damp cloth Only use plain water Please note when deciding where to put the device that furniture surfaces are covered by various types of lacquer and plastic most of which contain chemical additives These may cause corrosion to the feet of the device thus resulting in stains on the surface of the furniture which can be difficult or impossible to remove SET UP AND SAFETY The screen of your LCD television meets the highest quality standards and has been checked for pixel faults Despite the great care taken in manufacturing technological reasons make it impossible to completely discount the possibility that some pixels may be faulty Provided they are within the thresholds specified by the DIN norm pixel faults of this kind cannot be
37. ideo signal FBAS Audio signal stereo analogue Channel position AV 1 Connect the Videox cinch socket on the television and the corresponding socket on the external device using cinch cables video signal 2 Connect the L R sockets on the television to the corresponding sockets on the external device using cinch cables audio signal USING EXTERNAL DEVICES Using a video recorder DVD player or set top box 1 Switch on the video recorder DVD player or set top box and se lect the Function you wish to use 2 Press AV select the input signal channel with A or W SCART AV S Video HDMI1 HDMI2 HDMI3 or YPBPR and press to confirm Headphones SOUND Volume N Te Balance AVL Sound Type Sound Mode Equalizer GRUNDIG g Headphone eee N Eed Back Exit ev 8 9 Select 1 Connecting the headphones Plug the headphone jack 3 5 mm jack plug into the head phone socket on the right side of the television Selecting audio settings for the headphones Open the menu with sie The PICTURE menu is displayed Select the SOUND menu with or and confirm with Select the Headphone with W or A Adjust the volume with or F Press i to end the setting ENGLISH USING EXTERNAL DEVICES Decoder or satellite receiver OPTIONS Language Settings R
38. ion to analogue channels 1 2 Open the INPUT SOURCE menu by pressing AV Select input source ATV with W or A and press to confirm Note Additional operations are explained in the following sections Re tuning all analogue television channels These settings are only necessary if you can not receive any digital stations or if you want to re tune all analogue channels The analogue television stations are listed in the channel list after the digital television stations Note Plug the rooftop antenna cable for analogue television stations into the SANT IN socket on the television Open the menu with sie The PICTURE menu appears Select the CHANNEL SETUP menu with or Select Auto Tuning with W or A and confirm with Select Country Selection by pressing W or A and press or st to make the setting Select the Scan Type with w Press or to select the ATV display and start the search with The Searching menu appears and the search for analogue TV stations begins This may take several minutes depending on the number of television stations received The search is ended when the Programme Table appears Note You can stop the search by pressing mie 6 Press i to end the setting ENGLISH A ul Analogue Manual Tuning Programme No i Analogue Manual Tuning System
39. lected data format Name of the data medium Total folders on the data medium Total memory and available memory of external data medium Inset picture of a selected JPEG picture Status information for the selected file N OU BF OWN Menu navigation ENGLISH Ca Ga USB SETUP Auto Preview Off Slide Show Interval View Mode Original 34 DA 8 9 8 Select Back Exit USB MODE Settings in the USB setup menu y A 2 r U Opening the USB setup menu 1 Open the menu with i The PICTURE menu is displayed 2 Select the USB SETUP menu with or Note Additional operations are explained in the following sections Switching on automatic preview If the automatic preview is switched on you can see the selected JPEG picture in the main menu of the file browser 1 Select Auto Preview with W or A 2 Press or to switch on the on function 3 Press i to end the setting Selecting the display duration of the slideshow 1 Select Slide Show Interval with W or A 2 Select the time 3 5 10 seconds with or 3 Press i to end the setting Selecting the display mode 1 Select View Mode with w or A 2 Press or to select the function 3 Press i to end the setting Playback Basic functions 1 Press AV to select data medium press W or A to select USB and pres
40. me with w or A and press s to confirm Off Time Off Auto Sleep ii Time Zone Berlin GMT 1 2 Select Repeat with w or A and select the mode with or sa 3 Select Hour with W or A and enter the time with 1 O GRUNDIG 4 Select Minute with w or A and enter the time with Back 1 0 ev so Select ES Select Close with W or A and press to confirm 6 Press i to end the setting Switch on timer In the On Times menu you can enter a switch on time for the tele vision The television switches on with the preset volume and the desired channel after the set time in stand by mode has elapsed TIMER Select On Time with sV amp or A and press to confirm Select Activate with W or A and press or F to Ime EER ae choose when the television should switch on Select Hour with W or A and enter the time with 1 O Time Zone Berlin GMT 1 Select Minute with W or A and enter the time with 1 0 Select Volume with W or A and set the volume by pressing OF Pa 6 Select Mode with W or A and press or y to select DTV or ATV This entry is only possible if you have already entered a switch on time 7 Select Program with w or A and enter the television channel by pressing or
41. n Guides menu appears when the device is first switched on Press or st to select the language Help If the Installation Guide menu does not appear on the screen make the setting by following the instructions on returning the tel evision to its factory condition on page 26 Note The antenna power supply may only be switched on if the an tenna is actually an active indoor antenna with a signal amplifier and it is not already supplied with a voltage via a mains plug or similar supply Otherwise you may cause a short circuit and irreparably damage your antenna Select the Active Antenna Power with W or A Press or F to switch on the antenna voltage On Select Auto Tuning with W or A and confirm with Country Selection is active Press or to select the country Select the Scan Type with W or A Press or st to select whether you want to search for only digital television stations DTV only analogue television stations ATV or both ATV amp DTV Select Time zone with W or A Press or F to select time zone Press to start the search The Searching menu appears and the search for TV stations begins This may take several minutes depending on the number of television stations received The search is ended when the Programme Table appears Note The search can be ended prematurely wi
42. n on or off 3 Press i to end the setting Selecting the audio signal for digital output Here you select whether the audio signal is emitted from the SPDIF OUT socket in PCM data format or in AC3 format 1 Select SPDIF Output by pressing W or A 2 Select the signal type PCM or Dolby D by pressing or sa 3 Quit the setting by pressing i Parental control PARENTAL CONTROL ie z Lock System Set PIN Block Programme Parental Guidance Panel Lock GRUNDIG Back ea sos Select ei PARENTAL CONTROL 3 Lock System Set PIN Block Programme Parental Guidance RA Q viv je Ed Panel Lock GRUNDIG Back Exit ev 8 9 9 Select 1 Open the menu with sie The PICTURE menu is displayed 2 Select the SPARENTAL CONTROL menu with or sF amp and press to confirm 3 Enter the PIN code 0000 with 1 Ox Note Additional operations are explained in the following sections Lock the system Using this function you can lock the television menus so that they can only be accessed by entering a PIN code 1 Select Lock System with W or A 2 Activate the lock with or 3 Press i to end the setting ENGLISH Dolby and the double D symbol are trademarks of Dolby Laboratories hd N Manufactured under license from Dolby Laboratories CONVENIENCE FUNCTIONS PAREN
43. nnels Programme Table ALL TYPE All Networks CA FAV1 FAV2 FAV3 FAV4 f amp Service Type Network CHANNEL SETUP 1 Das Erste DTV 742 DTV 3 SAT 1 DTV 4 ProSieben DTV 9 3sat DTV 6 kabel eins DTvI7 WDR3 ptv 8 N24 DTv 9 Doku Network Move Back Q Delete amp Service Type Exit Prev Page Next Page bag to Select vo 1 In the sProgramme Table menu press W or A to select the channel to be deleted and press slik yellow to confirm 2 Press sO green to confirm the deletion Notes Press gt red to delete all the channels Presets whose channels have been deleted are no longer shown in the Programme Table Skipping television stations Programme Table ALL TYPE All Networks CA FAV1 FAV2 FAV3 FAV4 Qf Service Type Network CHANNEL SETUP 1 Das Erste DTv 2 ZDE DTV 3 SAT 1 DTV 4 ProSieben DTV S 3sat DTV 6 kabel eins DTvI7 WDR3 DTV f8 N24 DTV 9 Doku Network Move Back Delete Service Type Exit Prev Page Next Page LAJ te Select You can highlight television stations to be skipped when you se lect with w or A It is still possible to select using the num ber buttons 1 In the Programme Table menu select the television chan nel with W or A 2 Press to switch to the Q symbol and press s to highlight the television channel The channel is marked with Q
44. or indoor antenna passive or active indoor antenna with its own power supply for digital tele vision stations into the antenna socket ANT IN on the tele vision set or plug the rooftop antenna cable for analogue television stations into the ANT IN socket on the television Note When connecting an indoor antenna you may have to try it out at different positions until you get the best reception 2 Plug the mains cable supplied into the AC IN mains socket of the television 3 Plug the mains cable into the wall socket Note Only plug the device into the mains socket after you have connected the external devices and the antenna Only connect the television using the power cord supplied to a suitable earthed safety socket Do not use an adapter plug or extension lead which does not meet the applicable safety standards Do not tamper with the power cord ENGLISH N CONNECTION PREPARATION Inserting batteries in the remote control 1 Open the battery compartment by removing the lid 2 Insert the batteries 3 x 1 5 V micro for example RO3 or AAA Observe the polarity marked on the base of the battery com partment 3 Close the battery compartment Note If the television no longer reacts properly to remote control commands the batteries may be flat Be sure to remove used batteries The manufacturer accepts no liability for damage resulting from used batteries Environmental note Batteri
45. r A and adjust with or sk Under licence from SRS Labs Inc TruSurround XT SRS and the SIS symbol are trademarks of SRS Labs Inc TruSurroun id XT Audio Description gt SOJ 0 NB TruBass Dialog Clarity Si ev ie 8 Select On GRUNDIG Back Exit SETTINGS TruBass and Dialog Clarity The TruBass setting gives you an increased bass effect Dialog Clarity recognises dialogue sections in audio recordings and improves dialogue reproduction The two functions can be found on the second page of the SOUND menu Note The SRS setting must be selected in the Sound Mode line 1 Select TruBass or Dialog Clarity with w or A 2 Select the setting with or F 3 Press Z to end the setting Concluding the settings 1 Press i to finish the settings TELEVISION OPERATION Basic functions Switching on and off 1 Press sc 1 0 or W or A to switch on the device from standby mode 2 OS 2 Press the W button to switch the television to standby mode Selecting channels 1 Use 1 0 to select channels directly 2 Press W or A to move up and down channels 3 Open the channel list by pressing x select the station with w or A and press to switch off the channel list Selecting stations from lists You can select stations from various lists e g All Channels FAV
46. rent presets CA FAV1 FAV2 FAV3 FAV4 O 2 Back Exit 1 In the sProgramme Table menu press W or A to se lect the channel to be moved Press O green to highlight the channel Enter the new presets with one two or three digits using 1 0 Press to confirm the entry Notes To sort the other television channels repeat steps 1 to 4 Stations that are assigned to fixed preset numbers such as French stations with LCN coding cannot be moved SET TINGS Creating a list of favourites Programme Table ALL TYPE All Networks CA FAV1 FAV2 FAV3 FAV4 Service Type Network CHANNEL SETUP DTV 2 ZDF DTV 3 SAT 1 DTV 4 ProSieben DTV 9 3sat DTV 6 kabel eins DTvIZ WDR3 DTV 8 N24 DTv 9 Doku Network Move Back Delete Service Type Exit Prev Page Next Page ey 8 9 8 Select You can select your favourite channels and save them in up to four lists FAV1 to FAVA 1 In the Programme Table menu select the television channel with W or A 2 Push the television channel with or sF amp into the favourites list 1 to 4 and save it with The position in the favourites list is marked with sec You can enter the same channel in more than one favourites list Note You can delete channels from the favourites list Press W oder A and or to select the channel and to delete it Deleting cha
47. rmat if this format is detected via the Euro AV socket 1 Select the picture format with E The selected picture format for example 16 9 appears on the screen You can choose between the following picture formats AUTOMATIC format The picture format is automatically switched to 16 9 for 16 9 programmes The picture format is automatically switched to 4 3 for 4 3 programmes 16 9 and 14 9 formats During programmes in 4 3 format the picture is stretched horizon tally if 16 9 or 14 9 is selected The picture geometry is stretched horizontally With actual 16 9 signal sources from a settop box on the Euro AV socket the picture fills the screen completely and with the correct geometry 4 3 format The picture is shown in 4 3 format LetterBox format The letterbox setting is especially suitable for programmes in 16 9 format The black borders which are usually at the top and bottom of the screen are eliminated 4 3 pictures fill the screen The transmitted pictures are enlarged but are slightly cropped at the top and bottom The picture geometry remains unchanged Subtitle format If you cannot read the subtitles which appear on the bottom of the screen then select Subtitle Panorama format This setting is suited to films with a large width height ratio During programmes in 4 3 format the picture is stretched horizon tally if the sPanorama function is s
48. s to confirm The file browser the Contents of the data medium is dis played 2 Select file format All Supported Text Movie Music Photo with OF OF 3 Switch to the file overview with 4 Select the file you want with w or A and press s to confirm A list of sub directories appears Note Switch back to the main folder with Z USB MODE 5 Select the track or picture with W or A and start play by pressing sb amp You can view information on the film by pressing F gt red For playing MP3 or WMA data information on the album track and singer is displayed at the right of the menu When playing picture data information about the resolution and the size is displayed at the right of the menu Note The file browser is switched off when playing picture data Press E to switch back to the file browser Press ff to pause playback Press sb to resume normal playback Press si to end playback The file browser appears Note To return to the main folder press A to select the folder icon EN lt and then press Additional playback functions Depending on the file formats used the following additional functions are possible If the Q symbol appears on the television screen then the selected function is not possible with this file Play selected tracks Only play the marked tracks 2 3 A Select the
49. s This may take several minutes depending on the number of television stations received The search is ended when the Programme Table appears Note You can stop the search by pressing mie Press sit to end the setting Tuning the digital television stations by entering the channel numbers Open the menu with sie The PICTURE menu appears Select the CHANNEL SETUP menu with or sFa Select Digital Manual Tuning with w or A and press to confirm The Digital Manual Tuning menu appears Enter channel number directlywith 1 O and press s to confirm The search is finished when the channels found appear in the list Press sit to end the setting SPECIAL SETTINGS Tuning analogue television stations This setting is only necessary if you cannot receive any digital stations and you have not carried out an analogue search during initial setup The television station can be set directly or using the search CHANNEL SETUP v Auto Tuning Digital Manual Tuning Analogue Manual Tuning Programme Table Signal Information CA Module Not Inserted Active Antenna Power HU Digital Manual Tuning A a Analogue Manual Tuning DR ramma a CA Mogde Normer amp U ev 8 9 Select ie 5 v Back Exit Searching 14 161 25 MHz ATV atv 1 ARD Atv 2 ZDF ATV 3 BRS ATV 43 SAT Skip Exit Switching the televis
50. settings incorrectly set Is the antenna cable connected Start the station search Adjust the brightness contrast or colour setting Problem at station Interference from other devices Test with another channel Change the position of the device Ghosts reflection Channel setting Antenna Automatic or manual channel setting fine tuning Have antenna cable or system checked No colour Colour intensity at minimum TV standard setting if setting option is available Turn up the colour Select the correct colour stan dard Problem at station Test with another channel Picture but no sound Teletext missing or faulty Volume set to minimum Problem at station Turn up or switch on the volume Test with another channel Television station has no tele text or antenna system Station signal too weak Test another channel for fine tuning and ghosts Check the antenna system Remote control does not work No optical connection Remote control batteries Point the remote control at the television set Check the batteries change if necessary Operating condition undefined Switch off the television with the main power button for approxi mately 2 minutes Picture is dark in PC mode Incorrect setting for picure reso lution and picture frequency on the PC NOTE Change the setting on the PC for example picture resolution 1280 x 768 pictur
51. signal level not only depends on your receiver system but also on the channel which is currently active Remember this when aligning your antenna using the signal level display 4 Press six to end the display Updating software OPTIONS Language Settings gt 5 Restore Factory Defaults gt 2 Country Deutschland Game Mode ii Software Update gt x SPDIF Output U ex Back to Select ep Exit only for digital television channels 1 Open the menu with sie The PICTURE menu appears 2 Select the OPTIONS menu with or t 3 Select the Software Update menu by pressing W or A 4 Press to start the software update The software is updated automatically if possible 5 Press i to end the setting ENGLISH A 50 CE pad INFORMATION Technical data Operating voltage 230V 50 Hz Power consumption in operation 110 W Vision 26 in operation 140 W Vision 32 in standby lt 1 2 W Sound output 2 x 14 watts music 2 x 7 sine wave Vision 26 2 x 20 watts music 2 x 10 sine wave Vision 32 Reception ranges Analogue CO1 C80 special channels S01 S41 Digital VHF UHF Bandwidth 7 MHz and 8 MHz COFDM modes 2k and 8k Constellation IJ6QAM 64QAM QPSK Preset channels 400 digital 99 analogue and 8 AV 1 USB Screen size 66 cm 26 Vision 26 81 cm 32 Vision 32 Max resolution WXGA 1366 x 768 Weight approx 9 5 kg Vision
52. th i ENGLISH do 14 CHANNEL SETUP Auto Tuning SETTINGS Changing stored channels for digital stations You can change the order of the channels found as required delete channels you do not need and block access to certain presets parental control Press blue to switch between Programme Table ALL TYPE Programme Table DTV Programme Table RADIO and Pro gramme Table ATV Press 78 gt red to display the channels assigned to a network Press P to switch the channel list to the next page press S to switch it back to the previous page Opening the channel list Digital Manual Tuning Analogue Manual Tuning Programme Table Signal Information CA Module Signal Information CA Module Notinserted Not Inserted Active Antenna Power gt 8 9 4 Select Programme Table 5 Back Exit Service Type ALL TYPE Network All CHANNEL SETUP ptv 1 Das Erste DIV 2 ZDF DTV 3 RTL Television DTvl4 SAT 1 Networks 5 ProSieben DTV 6 VOX DIV 7 RTL2 DTV 8 kabel eins DIV 9 Super RTL ev 1e Select New position O New position v GRUNDIG Open the menu with sie The PICTURE menu is displayed Select the CHANNEL SETUP menu with or Select Programme Table with w or A and confirm with The Programme Table menu is displayed Moving channels to diffe
53. track with w or sA and highlight using Select the next track with w or A and highlight with Start playback with gt Press si to end playback Note To remove the highlighting select the track with w or A and switch off the marking with Selecting a track or picture in steps SKIP 2 During playback select the next track picture you want with hle Select the previous track picture with sd Playback begins with the track or picture you selected ENGLISH Go ul 36 USB MODE Forward search only MP4 video files You can select different speeds 2 fold 4 fold 8 fold and 16 fold forwards and backwards 1 Select the playback speed during playback by pressing dd or D gt 2 Press sb to resume playback Enlarge reduce picture only JPEG MP4 video files This function allows you to enlarge or reduce various picture sections 1 Press during pause or playback Turn the picture display only JPEG files The pictures can be rotated by 90 1 During playback press or to rotate the pictures by 90 Repeat functions Options the selected track is repeated once all tracks are played repeatedly 1 Before playback select the repeat function with PIP 2 Start playback with Br 3 Deactivate the repeat function with PIP The display changes to USING EXTERNAL DEVICES DVD player DVD r
54. ualizer Headphone N EK 2 Select the setting SRS with or sa BO som Back Equaliser ep Exit The equaliser offers you four preset sound settings Music Sports Movie and Speech and one which you can create yourself User SINE 1 Select Equalizer with w or A and confirm with The EQUALIZER menu appears Note If the SRS setting has been selected in the Sound Mode line the Equalizer line cannot be selected Volume N Te Balance GRUNDIG Equalizer Headphone 2 Select the audio setting User with or and confirm with ME The frequency band 120 Hz is activated 3 Set the desired value with W or A and select the next frequency band with or se 4 Press Z to save the setting Audio description audio subtitles Audio description is an additional audio channel for people who are visually impaired The activities surroundings scene changes or the appearance the gestures and facial expressions of the actors are described This sound is transmitted at the same time as the normal sound with digital television stations This depends on the programme being ers broadcast 1 Select w with W or A Audio Description Volume 2 Select Audio Description with w or A and press s to confirm 3 Select On with or sa GRUNDIG 4 Select the Volume with w o
55. yed 2 Select the PC SETUP menu with or and confirm with PC SETUP Select the function or setting you want with W or A and press U Or t to execute it A Options ical Position cc i Auto Adjust For automatic PC configuration Horizontal Position Adjust the picture position horizon tally Vertical Position Adjust the picture position vertically BG sees Back Size Set the cycle frequency Ext Phase Remove horizontal flicker blurring and horizontal lines 4 Press i to finish the settings 42 OPERATION WITH COMMON INTERFACE Inserting the CA module Note Switch off the appliance before inserting the CA module in the Cl slot Insert the smart card into the CA module 2 Insert the CA module with the smart card into the Cl slot on the television Note To see which CA module is in the Common Interface slot go to the CA Module submenu Access control for CA module and smart card 1 Open the menu with sie CHANNEL SETUP oi The PICTURE menu is displayed U A 2 Select the CHANNEL SETUP menu with or sF amp and con firm with re 3 Select CA Module with w or A and press to CA Module IRDETO ACCESS Active Antenna Power U con fi rm Notes This menu give operating instructions and after you enter your PIN code
Download Pdf Manuals
Related Search