Graco 309283A User's Manual
Contents
1. Using a needle nose pliers remove air tube from barb on bottom of gun A 4 Using the Graco wrench tool included with your gun loosen cup fitting B Detach the gun from the cup 5 Using the Graco wrench loosen nut C 6 Rotate fluid house until fluid fitting D is on top of the gun 7 Retighten nut C using the Graco wrench tool included with your gun gun hook fluid housing Thread fitting E on the cup over and fluid fitting D on the gun together Use the Graco wrench tool included with your gun to fasten securely To ensure air tube 1 is clear of the trigger during use before connecting the air tube to the gun barb route it through gun hook and then connect it to gun barb E 1 244134 TUBE kit 5 pack All written and visual data contained in this document reflect the latest product information available at the time of publication Graco reserves the right to make changes at any time without notice GRACO INC P O BOX 1441 MINNEAPOLIS MN 55440 1441 2 309283 www graco com PRINTED IN USA 309283 01 20012. Installation Instructions Form No 309283 Rev A For detailed HVLP Turbine Gun information gt Le and warnings see Operating Instructions i is manual contains kit INSTRUCTIONS manual 309317 installation instructions only Cu p Over Kit for To find your local Graco authorized service center H V L P Tu rb i ne G u n S e Call us at 1 800 690 2894 e Visit our website at www graco com Cup Over Kit 244136 A WARNING Relieve all fluid pressure in the system before you install remove or replace any parts See the Pressure Relief Procedure below or for more information refer to Operating Instructions manual 309317 MPa bar PSI Pressure Relief Procedure 1 Turn off turbine 2 Unlatch cup and air supply to gun 2 Twist cover counterclockwise COPYRIGHT 2001 GRACO INC GRACO Graco Inc is registered to I S EN ISO 9001 Cs GRACO INC P O BOX 1441 MINNEAPOLIS MN 55440 1441 Cup Over Kit 244136 Removing Cup or Remote Pressure Pot Attaching the Cup Over A WARNING i The spray gun cup is pressurized by the gun s air 2 supply To reduce the risk of serious injury from pressurized fluid or accidental spray from the gun 3 always turn off the air supply to the gun before you remove the spray gun cup 1 Turn off air supply to gun 2 Relieve pressure following the Pressure Relief Procedure provided on the front of this instruction sheet or in manual 309317 3
Download Pdf Manuals
Related Search