GoVideo R6750 User's Manual
Contents
1. DVD Recorder Y A AUDIO IN AUDIO OUT S VIDEO IN Pb S VIDEO OUT VIDEO COAXIAL OPTICAL AV OUT COMPONENT OUT NO DVD OUTPUT NOTE Do not connect the AC power cord until all other connections have DU been made in e The DVD Recorder receives broadcast channels 1 69 and cable TV channels 1 125 2 Connections 1 3 Cable Box Connections If you are using a cable box or satellite receiver to receive TV programs 1 Connect an RF cable from the wall outlet to the cable box 2 Connect an RF cable from the cable box to the DVD Recorder 3 Connect the DVD Recorder to your TV see page 15 Cable Outlet o Cable Box Satellite Receiver DVD Recorder COAXIAL OPTICAL A AUDIO IN Olo R AUDIO OUT L S VIDEO OUT VIDEO COMPONENT OUT AV OUT ace 66o ANTENNA PASSTHROUGH NO DVD OUTPUT NOTE e With this connection you will set the DVD Recorder to channel 2 3 or 4 and then select channels on the cable box 1 4 DVD Recorder User s Guide Basic TV Connections If your TV has standard audio video inputs red white and yellow RCA jacks 1 Connect the supplied audio video cables from the DVD Recorder to your TV as shown 2 Connect the supplied power cable from the DVD Recorder to a standard wall out let 3 Press POWER to turn on the DVD Recorder 4 Turn on your2. Fam recording Garin ana 1 Press SETUP 2 Select Record 5 Quality 3 Choose from the following HQ best 1 hour disc SP better 2 hours disc EP good 4 hours disc SLP fair 6 hours disc Auto Chapter Marking Enables automatic chapter marking at regular intervals during DVD recording 1 Press SETUP 2 Select Record 5 Chapter Mark 3 Choose from the following Off Disables automatic chapter marking 5 30 minutes Chapters will be cre ated automatically every 5 30 min utes during recording Automatic Chapter Marking makes it easy to browse your DVD recordings later using the PREV 44 NEXT gt buttons Setup Menu Navigation Keys 3 Setup 25 Audio Settings Digital Out Sets the format of the digital audio signal from the rear panel Optical and Coaxial jacks 1 Press SETUP 2 Select Audio gt Digital Out 3 Choose from the following PCM Select if the DVD Recorder is connected to a 2 channel stereo digital amplifier Bit Stream Select if the DVD Re corder is connected to a 5 1 channel amplifier receiver with a Dolby Digital decoder DTS Out Enables the DVD Recorder to output a DTS Digital Theater Sound signal to an external receiver with a DTS decoder 1 Press SETUP 2 Select Audio gt DTS Out 3 Turn DTS Out on or off e Ifyou are not using the digital audio outputs Optical or Coaxial you do not need to adjust these settings 26
3. Pauses playback While in Pause mode press repeat edly to step forward one frame at a time PLAY OPTIONS Shortcut to a variety of special playback features see right column Play Options Menu Press PLAY OPTIONS during playback to display the Play Options menu Use the 4 gt a v and ENTER keys to select from the following options Slow Motion Search A B Repeat Subtitle Audio Angle gt gt gt gt gt gt gt Information Exit Slow Motion Plays slow motion forward or backward at 1 2 or 1 4 normal speed Press PLAY to resume normal play Search Jumps to a specific Title Chapter or Time Use the 0 9 keys and press ENTER to start playback from the specified time A B Repeat Sets two points A and B to repeat in a loop Select Cancel to resume normal play Subtitle Displays available subtitles on the DVD Audio Displays available soundtracks audio formats on the DVD Angle Displays available camera angles on the DVD Information Displays current playback information including Title Chapter elapsed play back time and more 33 4 Operations Other Disc Playback Audio CD Playback To play an Audio CD 1 Load the Audio CD in the disc tray e The disc will begin playback auto matically Press PREVi44 NEXT Wi to browse the tracks Press PAUSE II to pause playback Press STOP Ek to stop playback Use the 0
4. e MP3 Max files 1000 32 320 kbps e JPEG Max files 1000 Recordable Media DVD R DVD VR Mode DVD RW DVD VR Mode Audio Audio Formats Dolby Digital Multi channel MPEG1 2 channel MPEG2 Multi channel PCM 2 channel Audio Performance DA Converter 24 bit 192KHZ AD Converter s24 bit Signal Noise 1kHz 290dB Dynamic Range 1kHz 280dB Ch Separation 1kHz 280dB THD 1kHz lt 65dB Video Video Formats MPEG2 for DVD VR DVD Video SVCD MPEG1 for DVD VR VCD Video Performance DA Converter 10 bit 54MHz Composite Output 1 Vp p 75 Ohm S Video Output Y 1Vp p 75 Ohm C 0 3 Vp p 75 Ohm Y 1Vp p 75 Ohm Pb 0 7 Vp p 75 Ohm Pr 0 7 Vp p 75 Ohm Component Output Video Resolution e Scan Frequency 60Hz Number of lines 525 lines DVD Video 720x480 SVCD 352x480 VCD 352x240 Video Recording Quality T osmbps mpece 720x480 Taw 6 7mons mean 250x240 NOTE e Specifications and product design are subject to change without notice 41 5 Help Warranty GoVideo Limited Warranty Who Provides the Limited Warranty During the warranty period the GoVideo Warranty Administrator will honor service for 90 days labor 1 year parts from the original date of consumer purchase See below for Commercial Industrial or Educational use coverage Remote controls are warrantied for 90 days from the date of purchase Who is Protected This warranty protects the original consumer owner
5. same warranty coverage as stated in this warranty 9 cays Tabor ear arts What are the Exceptions This warranty does not cover 1 Normal maintenance service such as cleaning 2 Damage from misuse abuse neglect or accident natural disasters or Acts of God 3 Cabinetry decorative parts A C adapters knobs or buttons 4 The foreign country use of this product 5 GoVideo product which has been electronically or mechanically modified in any way or incorporated into other products 6 Installation and setup service adjustments 7 Owner instruction Your Owner s Guide provides information regarding operating instructions and user controls For additional information contact your authorized GoVideo dealer GoVideo is not responsible for any shipping handling or insurance charges This Exclusive Limited Warranty excludes all incidental and consequential damages Some states do not allow the exclusion of incidental and consequential damages so the above exclusion may not apply to you ALL IMPLIED WARRANTIES INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY PERIOD Some states do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you This Exclusive Limited Warranty gives you specific legal rights and you may also have other rights which vary from state to state GoVid
6. 9 keys to select a specific audio track then press ENTER e Playback will start from the selected track MP3 CD Playback To play MP3 files on CD R RW 1 Load the MP3 disc in the disc tray e The disc will begin playback auto matically 2 Press PREVIW NEXTWI to browse the MP3 files Uaw N 3 Press PAUSE II to pause MP3 playback 4 Press STOP E to stop MP3 playback Photo CD Playback To play JPEG files on CD R RW 1 Load the JPEG disc in the disc tray e The slideshow will begin automati cally 2 Press 4 b to browse the pictures 3 Press a to rotate the pictures clockwise counter clockwise 4 Press PAUSE II to pause the slideshow 5 Press STOP to stop the slideshow Notes on MP3 JPEG Playback Files must have the JPG or MP3 file extensions e It may take several minutes to load the disc depending on the numbers of files and or folders e FF and REW do not work during JPEG MP3 disc playback e Supports bitrates 32 320Kbps e If your CD R RW has both MP3 and JPEG files use PREVM4 and NEXT to browse the MP3 files and 4 to browse the pictures 34 DVD Recorder User s Guide Editing Options About Title Editing Once you have recorded a Title to a DVD R RW disc you can name protect overwrite or erase it using the Title Editor menu 1 Press PLAY or GUIDER amp to display the DVD Disc Menu 2 Usethe 4 a v keys to select the desired Title then
7. CD R RW Region 1 Discs Only e DVD R RW e DVD R RW This DVD Recorder will record on the following discs e DVD R Write Once e DVD RW ReWritable 1 Welcome Front Panel Front panel overview POWER button OPEN CLOSE button Disc Tray Front Panel Display PREV M4 NEXT buttons RECORD button au AWN co 10 11 12 INPUT button PLAY gt button STOP EI button PAUSE II button DV Input AV IN 1 jacks The INPUT button allows you to easily switch among all your input sources including DVD TV AV1 Front AV2 Rear S Video and DV 8 DVD Recorder User s Guide Front Panel Display Front panel display overview 12 3 4 5 6 7 8 9 10 11 12 13 1 Play indicator 8 DVD RW indicator 2 DVD indicator 9 DVD R indicator 3 SVCD indicator 10 Record indicator 4 VCD indicator 11 Pause Indicator 5 CD indicator 12 Status window 6 MP3 indicator 13 Timer recording mode 7 JPEG indicator 1 Welcome Rear Panel Rear panel overview R AUDIO IN i S VIDEO IN AUDIO OUT o L S VIDEO OUT CON PONENT OUT AV OUT ANTENNA IN jack S VIDEO IN jack AV IN 2 jacks uu fF WN e The ANTENNA PASSTHROUGH jack playback 1 0 DVD Recorder User s Guide ANTENNA PASSTHROUGH jack AV OUT jacks S VIDEO OUT jack OPTICAL OUT jack COAXIAL OUT jack o On OA COMPONENT VIDEO OUT jacks outputs the TV signal only a
8. DVD Recorder User s Guide Digital Out Bit Stream System DTS Out Off Language Surround DOLBY Playback Record Surround Sound Sets your preferred surround sound format when watching DVD movies 1 Press SETUP 2 Select Audio 5 Surround 3 Choose from the following Stereo Select if you prefer to hear the stereo soundtrack on DVD movies if available Dolby Select if you prefer to hear the Dolby Digital 5 1 soundtrack on DVD movies if available DTS Select if you prefer to hear the DTS 5 1 soundtrack on DVD movies if available Setup Menu Navigation Keys TV Tuner Settings TV Signal Specifies whether the DVD Recorder is connected to an antenna or cable TV source 1 Press SETUP 2 Select TV Tuner gt TV Signal 3 Choose from the following Antenna Select if the DVD Recorder is connected to an antenna Cable Select if the DVD Recorder is connected to a cable TV source Auto Select to have the DVD Re corder automatically detect if you are using an antenna or cable Auto Channel Search Automatically searches for all available TV stations from antenna or cable TV 1 Press SETUP 2 Select TV Tuner gt Utilities gt Start Scan e The DVD Recorder searches for all available stations This may take several minutes to complete e When finished press SETUP to exit Add Delete Channels Allows you to manually add or remove channels 1
9. POWER button in any position does not disconnect the main line Power can be controlled from the remote Laser Product Notice 1 CLASS 1 LASER PRODUCT 2 DANGER Visible and invisible laser radiation when open and interlock failed or defeated Avoid direct exposure to beam 3 CAUTION Do not open the top cover There are no user serviceable parts inside the unit leave all servicing to qualified service personnel DVD Recorder User s Guide FCC Notice This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver
10. Recorder as shown 2 Press INPUT until AV2 Rear or S Video appears on the screen DVD Recorder Va R COAXIAL AUDIOIN AUDIO OUT H L E ANTENNA IN S VIDEO IN b S VIDEO OUT 3 OPTICAL ANTENNA PASSTHROUGH NO DVD OUTPUT S Video Audio Composite Video Audio S VIDEO OUT VIDEO OUT R AUDIO L External AV Device e g VCR NOTE e To view the external device press INPUT on the remote control until AV2 Rear or S Video appears on screen To record from the external device see page 30 1 8 DVD Recorder User s Guide Front AV Connections You can view and record from an external device such as a camcorder or video game connected to the front panel AV or DV inputs 1 Connect standard audio video cables from the outputs of the external device to the inputs of the DVD Recorder as shown OR Connect a DV cable from the external device to the front panel of the DVD Record er as shown 2 Press INPUT until AV1 Front or DV appears on the screen DVD Recorder R6750 DVD R RW RECORDER Cox TE Co 7 LINE IN 1 MiniDV DVOUT VIDEO OUT L AUDIO R External AV Device e g Camcorder NOTE To view the external device press INPUT on the remote control until AV1 Front or DV appears on screen To record from the external device see page 30 2 Connections 1 9 3 Setu
11. blank disc the DVD Recorder will format or initial ize the disc automatically 2 Press GUIDER 4 to display the Easy Guider menu 3 Use a to select Record then press ENTER Playback Record ay rase 4 Use v to select TV then press ENTER 5 Use a to select the channel you want to record then press ENTER 4 25 If you are using a cable box satellite receiver set the DVD recorder to the receiver s output channel 2 3 or 4 and select the desired channel on the cable box receiver Select the desired recording quality and press ENTER 2hr SP 4hr EP 6hr SLP HQ best 1 hour disc SP better 2 hours disc EP good 4 hours disc SLP fair 6 hours disc Press ENTER to start recording To pause recording press PAUSE II To resume recording press PAUSE II again e To view the status of your recording press DISPLAY When finished press STOP E to stop recording e The disc is updated with the new recording This may take a few min utes to complete e To watch your recording see page 32 To finalize your disc to play on other DVD players see page 37 NOTE e You cannot change channels or record quality during recording 4 Operations 29 Recording from an External Source Recording from a VCR Camcorder etc Follow these steps to record from a VCR camcorder o
12. menu Press a to select Finalize then press ENTER Playback TI Record Do Erase Finalize Press ENTER again to confirm that you wish to finalize the disc e Finalizing can take up to 3 4 min utes depending on the type of disc how much is recorded on the disc and the number of titles on the disc When the disc finalization is com plete press ENTER to exit the Easy Guider 37 4 Operations 5 This Chapter shows you how to get help including troubleshooting customer support and warranty information 38 DVD Recorder User s Guide Customer Support The Troubleshooting section below will help you solve common issues with your DVD Recorder If you don t find the answers you need here you can contact our Customer Service Department as follows Phone 800 736 7679 E Mail customersupport govideo com Web www govideo com Troubleshooting No power The power cord is disconnected Plug the power cord into the rear panel and wall outlet securely No picture The TV is not set to receive DVD Select the appropriate video input on Recorder signal output the TV so the picture from the DVD Recorder appears on the TV screen The video cable is not connected Connect the video cable securely securely Pp The TV power is turned off Turn on the TV No sound The equipment connected with the Select the correct input mode on the audio cable is not set to receive DVD audio receiver so
13. of this GoVideo product What is Covered and How Long This warranty covers internal operating parts and service labor to repair or replace covered parts in this GoVideo product for 90 days labor 1 year parts from the date of purchase defined as follows 1 Original Consumer Retail Purchase 2 First Rental Purchase Agreement or 3 First Lease Purchase Agreement the Warranty Period Labor and replacement parts supplied during the Warranty Period are covered only for the remaining portion of the original Warranty Period The GoVideo Warranty Administrator shall have no liability for service under this warranty if non OEM Original Equipment Manufacturer replacement parts are used in the repair of your GoVideo product What the Owner Must Do If Service is Required Please contact our customer service department at 1 800 736 7679 to repair or replace your product at GoVideo s option if it proves to be defective in material or workmanship under normal use during the warranty period listed above effective from the date of original consumer purchase of the product Repaired or replacement units are warrantied for the remaining period of the original warranty Please retain dated sales receipt Within the warranty period the customer pays for inbound shipping charges and GoVideo pays return shipping charges 42 DVD Recorder User s Guide Other Warranty Coverage Commercial Industrial or Educational use has the
14. Menu Navigation 21 System Settings 22 Language Settings 23 Playback Settings 24 Record Settings 25 Audio Settings 26 TV Tuner Settings 27 4 Operations RECORD Basic Recording 29 Recording from an External Source 30 Timer Recording 31 PLAY DVD Playback 32 Special Playback Options 33 Other Disc Playback 34 EDIT Editing Options 35 Channel Editing 36 Formatting Finalizing Discs 37 5 Help Customer Support 39 Troubleshooting 39 Technical Specifications 41 Warranty 42 Index 43 2004 GoVideo All rights reserved Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories DTS and DTS Digital Surround are trademarks of Digital Theater Systems Inc All other brand and product names are trademarks or registered trademarks of their respective companies 4 Important Safety Instructions 10 Read Instructions All the safety and oper ating instructions should be read before the product is operated Retain Instructions The safety and operat ing instructions should be retained for future reference Heed Warnings All warnings on the prod uct and in the operating instructions should be adhered to Follow Instructions All operating and us ing instructions should be followed Cleaning Unplug this product from the wall outlet before cleaning Do not use liquid cleaners or aerosol cleane
15. Press SETUP 2 Select TV Tuner gt Utilities gt Add De lete Ifyou are using a cable box or satellite receiver you do not need to adjust these settings SETUP San Scan system Add Delete oo Language ex Playback TV Signal Auto Record 3 Add or delete channels e Use 4 haw to select the desired channel e Press ENTER to add or delete the channel e When finished select Exit and press ENTER Swap Channels Allows you to swap the TV channel order stored in the DVD Recorder to match the channel order stored in your TV set 1 Press SETUP 2 Select TV Tuner gt Utilities gt Swap 3 Select the channel to be swapped and press ENTER 4 Select the new channel position and press ENTER e The channels will swap positions e Repeat as necessary e When finished select Exit and press ENTER Setup Menu Navigation Keys 27 3 Setup Operations This Chapter shows you how to use the most com mon features of the DVD Recorder including re cording playback and editing DVDs e For recording features see pages 29 31 e For playback features see pages 32 34 e For editing features see pages 35 37 28 DVD Recorder User s Guide Basic Recording Recording from TV Follow these steps to record a TV show to DVD T Insert a blank DVD R or DVD RW disc into the disc tray e Press OPEN CLOSE to open and close the disc tray e When you insert a
16. R6750 User s Guide DVD Recorder GO VIDEO 2 Congratulations Congratulations on your purchase of this R6750 DVD Recorder We know you will enjoy this product for many years to come In case service is required please take a moment to write down your serial number located on the rear panel of the DVD Recorder CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute risk of fire or electric shock This symbol is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying this product CAUTION THIS PRODUCT UTILIZES A LASER USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE DO NOT OPEN THE COVER AND DO NOT REPAIR YOURSELF REFER SERVICING TO QUALIFIED PERSONNEL WARNING TO REDUCE THE RISK OF FIRE ELECTRIC SHOCK OR PRODUCT DAMAGE DO NOT EXPOSE THIS APPARATUS TO MOISTURE AND ENSURE THAT OBJECTS FILLED WITH LIQUIDS SUCH AS VASES SHALL BE PLACED AWAY FROMTHE APPARATUS Power Notice Disconnect the AC plug to shut the power off completely The
17. TV and select the Video input to view the DVD Recorder e The GoVideo splash screen appears 5 Continue with Chapter 3 to set up your DVD Recorder DVD Recorder COAXIAL AUDIO Tri S VIDEO IN ANTENNA IN ANTENNA PASSTHROUGH NO DVD OUTPUT VIDEO AVIN2 p0 07 00 R AUDIO L VIDEO IN TV NOTE The ANTENNA PASSTHROUGH cannot be used to view the DVD Recorder This output only passes the antenna or cable signal through to your TV e If your TV has S Video or Component Video inputs see page 16 2 Connections 1 5 Enhanced Video Options If your TV has S Video or Component Video inputs you can enjoy superior picture quality Composite Video good 1 Connect an S Video cable OR set of Component Video cables from the DVD Recorder to your TV as shown S Video better 2 Select the S Video or Component Video input on your TV to view the DVD Recorder ee 3 Activate the S Video or Component Progressive Scan Video Scan Video best output in the Setup menu see page 22 DVD Recorder N O o PASSTHROUGH NO DVD OUTPUT S Video NOTE Ifyou use one of these enhanced video connections you must enable the Video Output in the menu system see page 22 Be sure to choose one of the audio connection options on page 17 1 6 DVD Recorder User s Guide Enhanced Audio Options If you have a stereo
18. ayed start playback automatically when loaded si S bira If the DVD has see Banoyees Buoys a Disc Menu a ful HOA or more than Binago Bilas Baes one Title the Disc Menu may ap ka AT Lo pear If so use 4 haw to highlight options and press ENTER to make 4 Press 4 a to select the Title you selections want to play and press ENTER e For special playback options see e For special playback options see page 33 page 33 To switch to a text based menu select the Text View icon and press ENTER e To switch back to the graphical menu select the Thumbnail View icon and press ENTER You can also press GUIDER amp and select Playback to view the DVD Disc Menu DVD Recorder User s Guide Special Playback Options Special Options During Playback DISC MENU TITLE O DISPLAY PREV NEXT GD REW FF aa PAUSE STEP D PLAY OPTIONS DISC MENU Displays the DVD Disc Menu if available Use the 4 gt a and ENTER keys to select options in the Disc Menu TITLE Displays the DVD Title Menu if available DISPLAY Displays playback infor mation including the disc type the current Title and Chapter number and the elapsed playback time PREV 44 NEXT gt gt Skips to the next or previ ous chapter FF 44 REW gt gt Scans forward or backward at 2x 4x 8x or 16x normal speed PAUSE STEP Il gt
19. ct Ratio Sets your preferred aspect ratio for DVD movies 1 Press SETUP 2 Select Playback 5 Aspect Ratio 3 Choose from the following 16 9 Wide Select if you have a widescreen TV 4 3 L Box Select if you have a standard TV and prefer to watch widescreen mov ies with black bars above and below the picture 4 3 Pan Select if you have a stan dard TV and prefer to have widescreen movies cropped Pan amp Scan to fit the screen 24 DVD Recorder User s Guide Parental Control Blocks playback of rated DVDs based on their content Not all discs are rated 1 Press SETUP 2 Select Playback gt Parental 3 Select the desired Parental Control rating from 1 Kid Safe to 8 Adult e Choose Off to disable the Parental Control feature 4 Enter your password using the 0 9 keys e The factory default password is 0000 Password Changes the Parental Control password 1 Press SETUP 2 Select Playback gt Password 3 Enter your old password using the 0 9 keys 4 Enter your new password 5 Re enter your new password Slideshow Time Sets the slide show interval the time between slides when a JPEG Picture CD is playing 1 Press SETUP 2 Select Playback gt Slide Time 3 Choose a slide interval from 3 99 seconds e To disable automatic slideshows select Off Setup Menu Navigation Keys Record Settings Record Quality Sets the default quality for DVD KO Ga
20. d the DV camcorder using your DVD Recorder remote control You can also use Easy Guider to record from an external source Just follow the steps on page 29 but on Step 4 select AV17 AV27 S Video or DV instead of TV 30 DVD Recorder User s Guide Timer Recording Before You Begin e Make sure the Date and Time are set correctly see page 22 e Make sure your disc has enough space to record the desired pro gram press DISC MENU to view the amount of available recording time Setting a Timer Recording To program a timer recording 1 Insert a blank DVD R or DVD RW disc into the disc tray e Press OPEN CLOSE to open and close the disc tray Press TIMER to display the Timer Re cord menu Press a w to select one of the timer events 4 Press 4 b to select Mode and press ENTER Press a w and ENTER to select Once For a one time recording Weekly For a weekly recording Daily For a daily recording 6 Usethe4 av and ENTER keys to select and set Date The date or day of the week of the recording Start The recording start time End The recording stop time 7 Press 4 to select Source and press ENTER 8 Press a and ENTER to select TV To record from TV use a v to select the desired channel AV1 Front To record from the front Audio Video Input AV2 Rear To record from the rear Audio Video Input S Video To record from the rear S Vi
21. deo Input DV Front To record from the front DV Input 9 Press 4 gt to select Quality and press ENTER 10 Press a v and ENTER to select HQ best 1 hour disc SP better 2 hours disc EP good 4 hours disc SLP fair 6 hours disc 11 If the Status column says Ready then programming is complete If the Status column is blank there is a problem with the timer record ing Use the 4 gt keys to go back and change the settings If you have not set the date and time see page 22 12 Press POWER to turn off the DVD Recorder e The DVD Recorder must be turned off to activate the Timer Recording e The TIMER indicator on the front panel display will light Timer Recording continues until you stop the recording or the disc is full 31 4 Operations DVD Playback Playing a DVD Playing a DVD R RW Follow these steps to play a DVD Follow these steps to play a DVD that 1 Press POWER to turn on the DVD you ve recorded on the DVD Recorder Recorder 1 Press POWER to turn on the DVD 2 Load your DVD in the disc tray with Recorder the label side up 2 Load your DVD R RW in the disc tray e Press OPEN with the label side up CLOSE to open e Press OPEN CLOSE to open and and close the close the disc tray 32 Press PLAY gt to start playback disc tray 3 Press PLAY gt or DISC MENU to view the DVD Disc Menu All Titles recorded programs on Many DVD discs the DVD R RW are displ
22. e insert or swap channels while watching TV 1 Press INPUT to select TV mode 2 Press EDIT to display the Channel Edi tor menu Add Delete Channels Allows you to manually add or remove channels 1 Use a to select the channel you wish to delete and press ENTER 2 To restore a deleted channel select it and press ENTER again Reorder Channels Allows you to change the order of the channels in your channel list 1 Use a v to select the channel you wish to move and press gt 2 Press a to select Move Up or Move Down and press ENTER e The channel moves up or down the list Rename Channels Allows you to name your stored channels Use to select the channel you wish to name and press gt 2 Press a to select Rename and press ENTER e The character palette appears 3 Use 4 gt a v to select the desired characters pressing ENTER after each entry 4 When finished select Finish and press ENTER 36 DVD Recorder User s Guide CHANNEL Move Up Insert To Insert Channels Allows you to reinsert a channel any where in the channel list 1 Use a v to select the channel you wish to insert and press gt 2 Press a to select Insert To and press ENTER 3 Use 4 a v toenterthe new Chan nel Number and press ENTER The channel moves to the new posi tion Swap Channels Allows you to swap the TV channel order s
23. e Language 23 Surround 26 Swap Channels 27 36 System Settings 22 T Technical Specifications 41 Time 22 Title 33 Title Editing 35 Troubleshooting 39 40 TV Signal 27 TV Tuner Settings 27 U Unpacking 7 V Video Output 22 W Warranty 42 Y YourDVD 24 5 Help 43 GO VIDEO
24. eo Warranty Administrator 7835 East McClain Drive Scottsdale Arizona 85260 1732 customersupport govideo com 1 800 736 7679 Index A A B Repeat 33 Add Delete Channels 27 36 Angle 33 Aspect Ratio 24 Audio 33 Audio CD Playback 34 Audio Language 23 Audio Settings 26 AutoPlay 24 Auto Channel Search 27 Auto Chapter Marking 25 C Channel Editor 36 Compatible Media 7 Connections Antenna Basic Cable 13 Basic TV 15 Cable Box 14 Component Video 16 Digital Audio 17 External Device 18 19 S Video 16 Stereo 17 Customer Support 39 D Date 22 Digital Out 26 Disc Menu 33 Disc Menu Language 23 DTS Out 26 E Editing 35 Erasing a Title 35 F Factory Settings 22 Finalizing 37 Formatting 37 Front Panel 8 Front Panel Display 9 l Information 33 Insert Channels 36 L Language Settings 23 M MP3 CD Playback 34 N Naming a Title 35 O OSD Language 23 Overwriting a Title 35 P Parental Control 24 Password 24 Photo CD Playback 34 Playback Audio CD 34 DVD 32 DVD R RW 32 MP3 34 Photo CD 34 Special Options 33 Playback Settings 24 Play Options 33 Protecting a Title 35 R Rear Panel 10 Recording Basic 29 External Source 30 Timer Recording 31 Record Quality 25 Record Settings 25 Remote Control 11 Rename Channels 36 Reorder Channels 36 S Safety Instructions 4 5 Search 33 Setup Menu Navigation 21 Overview 21 Sleep Timer 22 Slideshow Time 24 Slow Motion 33 Subtitle 33 Subtitl
25. ere they exit from the product Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built up static charges Section 810 of the National Electri cal Code ANSI NFPA 70 provides informa tion with regard to proper grounding of the Important Safety Instructions 16 17 18 19 20 mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding conductors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode GROUND ANTENNA DISCHARGE UNIT NEC SECTION 810 20 T N cal Ng GROUNDING CONDUCTORS NEC SECTION 810 21 ELECTRIC SERVICE EQUIPMENT GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM NEC ART 250 PART H Lightning For added protection for this product during a lightning storm or when it is left unattended and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the product due to lightning and power line surges Power Lines An outside antenna system should not be located in the vicinity of over head power lines or other electric light or power circuits or where it can fall into such power lines or circuits When installing a
26. is con nected Consult the dealer or an experienced radio TV tech nician for help 525P Progressive Scan Notice CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE IN CASE OF 525 PROGRESSIVE SCAN PICTURE PROBLEMS IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE STANDARD DEFINITION OUTPUT IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525P DVD PLAYER PLEASE CONTACT OUR CUSTOMER SERVICE CENTER Macrovision Notice U S Patent Nos 4 631 603 4 577 216 4 819 098 4 907 093 and 6 516 132 This product incorporates copyright protection technology that is protected by U S patents and other intellectual property rights Use of this copyright protection technology must be authorized by Macrovision and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Reverse engineering or disassembly is prohibited Table of Contents 1 Welcome Unpacking 7 Compatible Media 7 Front Panel 8 Front Panel Display 9 Rear Panel 10 Remote Control 11 2 Connections BASIC Antenna Basic Cable Connections 13 Cable Box Connections 14 BasicTV Connections 15 ADVANCED Enhanced Video Options 16 Enhanced Audio Options 17 Rear AV Connections 18 Front AV Connections 19 3 Setup Setup Menu Overview 21 About
27. n outside antenna system extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal Overloading Do not overload wall outlets extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock Object and Liquid Entry Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the product Servicing Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards Refer all servicing to quali fied service personnel 21 22 23 24 25 Damage Requiring Service Unplug this product from the wall outlet and refer servic ing to qualified service personnel under the following conditions When the power supply cord or plug is dam aged If liquid has been spilled or objects have fallen into the product If the product has been exposed to rain or water If the product does not operate normally by following the operating instructions Adjust only those controls that are covered by the operating instructions as an improper adjust ment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation If the product has been d
28. n such as a bookcase or rack unless proper ventilation is provided or the manufacturer s instructions have been adhered to Power Sources This product should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power supplied to your home consult your product dealer or local power company For products intended to operate from battery power or other sources refer to the operating instructions Grounding or Polarization This product may be equipped with a polarized alternat ing current line plug a plug having one blade wider than the other This plug will fit into the power outlet only one way This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug should still fail to fit contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the polarized plug Alternate Warnings This product is equipped with a three wire grounding type plug a plug having a third grounding pin This plug will only fit into the outlet contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the grounding type plug Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particu lar attention to cords at plugs convenience receptacles and the point wh
29. nd is NOT for DVD Remote Control Remote control overview N J O DI Ra 13 DOO i O Gol 15 5 PREV AA 16 Cy UI 4 STOP PLAY PAUSE STEP 5 a gt i 17 6 18 7 19 NG n a ee n 10 21 GO VIDEO ban on o ON AU AWN N mb mb md md md md md md mg NBentvaunkranas OPEN CLOSE button 0 9 buttons TITLE button PREV l44 NEXT gt gt buttons STOP m button PLAY gt button ARROW 4 gt a buttons GUIDER button INPUT button RECORD button POWER button CHa buttons DISPLAY button DISC MENU button SETUP button REW FF gt gt buttons PAUSE II STEP gt button ENTER button PLAY OPTIONS button EDIT button TIMER RECORD button e The GUIDER amp button is a fun and easy way to record play format and finalize discs see pages 29 30 and 37 1 Welcome 1 1 Connections This Chapter shows you how to connect the DVD Recorder to your TV and other home theater com ponents e For basic connections see pages 13 15 e For advanced connections see pages 16 19 1 2 DVD Recorder User s Guide Antenna Basic Cable Connections If you are using an antenna or basic cable TV service to receive TV programs 1 Connect the RF coaxial cable from the antenna or cable wall outlet to the rear panel of the DVD Recorder as shown 2 Connect the DVD Recorder to your TV see page 15 Antenna or Basic Cable
30. nd the Setup menu 1 Press SETUP 2 Select Language gt OSD 3 Select your preferred OSD language English Fran ais or Espanol Menu Language Sets your preferred language for DVD Disc Menus 1 Press SETUP 2 Select Language gt Menu 3 Select your preferred DVD Disc Menu language Audio Language Sets your preferred language for DVD audio soundtracks 1 Press SETUP 2 Select Language gt Audio 3 Select your preferred DVD Audio lan guage e f YourDVD is turned on see page 24 the DVD Recorder will Subtitle Language Sets your preferred language for DVD subtitles 1 Press SETUP 2 Select Language gt Subtitle 3 Select your preferred DVD Subtitle language e To disable subtitles choose Off search and select your preferred Audio and Subtitle languages Setup Menu automatically whenever you load a DVD movie Navigation Keys 3 Setup 23 Playback Settings YourDVD YourDVD automatically searches for your playback preferences including Audio language Subtitle language and Surround mode every time you load a DVD disc It then selects those preferences if they are available on the disc 1 Press SETUP 2 Select Playback 5 YourDVD 3 Turn YourDVD on or off AutoPlay AutoPlay skips the ads and trailers and starts DVD playback automatically when you load a disc 1 Press SETUP 2 Select Playback 5 AutoPlay 3 Turn AutoPlay on or off Aspe
31. nless you have connected the DVD Recorder to a TV equipped with a 480p Progressive Scan input Ifyou select Progressive accidentally and the picture is distorted press ENTER to cancel or wait a few seconds for the screen to revert to normal Date amp Time Sets the date and time This is necessary if you wish to record TV shows with the timer record feature 1 Press SETUP 2 Select System gt Date 3 Set the month day and year e Use 4 gt to move the cursor e Use a w to change each setting 4 Select System gt Time 5 Set the hour minutes seconds and AM PM e Use 4 gt to move the cursor e Use a w to change each setting 22 DVD Recorder User s Guide Video Output S Video Dae fiaooa Gime __11 32 554M Cautosieep Of System Language Playback Record Sleep Timer Sets the sleep timer 1 Press SETUP 2 Select System 5 Auto sleep 3 Set the timer from 30 to 120 minutes The DVD Recorder will power off automatically after the specified time has elapsed e To disable the sleep timer select Off Factory Settings Restores the DVD Recorder to its original factory settings 1 Press SETUP 2 Select System gt Default gt Restore e The DVD Recorder will restart with all menu settings restored to their factory defaults Setup Menu Navigation Keys Language Settings On Screen Display Language Sets the default language for On Screen Displays a
32. p This Chapter shows you customize the DVD Re corder to meet your personal requirements and preferences Key settings e To set the date and time see page 22 e To set your TV aspect ratio see page 24 e To search for TV channels see page 27 20 DVD Recorder User s Guide Setup Menu Overview The Setup menu allows you to customize your DVD Recorder Choose from six categories e System Settings see page 22 SETUP e Language Settings see page 23 PH 0na Sho e Playback Settings see page 24 er SC e Record Settings see page 25 Capek e os O Record e Audio Settings see page 26 e TVTuner Settings see page 27 About Menu Navigation e Press POWER to turn on the DVD Recorder Default j e Press SETUP to display the Setup menu SE an e Use the 4 v keys to move up and down 5 o e Usethe 4 gt keys to move left and right e Press ENTER to confirm your selections e Press SETUP again to exit the Setup menu OOOO r Cc BI K3 67 a PLAY D ENTER 4 hav 3 Setup 21 System Settings Video Output Activates the S Video Component Video or Progressive Scan output to your TV 1 Press SETUP 2 Select System gt Video Output 3 Choose from the following S Video Activates the S Video output Component Activates the Compo nent Video output Progressive Activates the Progres sive Scan output NOTE Do NOT choose Progressive u
33. press EDIT to dis play the Title Edit menu Naming a Title You can give your Title a name up to 8 characters 1 Select Title Name 5 Edit then press ENTER The keypad appears NANAHHONHO cv H9NANGNO0 Go D cv ULULO 2 Select the desired characters from the keypad pressing ENTER after each entry 3 When finished select Finish and press ENTER Protecting a Title You can protect a title on your disc from being accidentally erased or overwritten 1 Select Protection then press ENTER 2 Turn Protection on or off then press ENTER Overwriting a Title You can choose to overwrite an existing title DVD RW discs only e On DVD R discs each new recording is always placed immediately after the previous recording so the original recordings cannot be overwritten 1 Select Overwrite then press ENTER 2 Turn Overwrite on or off then press ENTER Erasing a Title You can erase recorded titles from both DVD R and DVD RW discs 1 Select Erase then press ENTER 2 The selected title is deleted After erasing a title from a DVD R discs the erased space cannot be utilized NOTE e Be sure to finish all editing before finalizing the disc You cannot edit a finalized disc 35 4 Operations Channel Editing About the Channel Editor The DVD Recorder includes a special Channel Editor that allows you to add delete reorder nam
34. r other external device 1 Connect your external device to the front panel or rear panel inputs see pages 18 19 2 Insert a blank DVD R or DVD RW disc into the disc tray e Press OPEN CLOSE to open and close the disc tray 3 Press INPUT repeatedly to select AV1 Front For a device connected to the front Audio Video Input AV2 Rear For a device connected to the rear Audio Video Input S Video For a device connected to the rear S Video Input DV For a device such as a digital camcorder connected to the front DV Input with a DV cable 4 Set the desired Record Quality Press SETUP then select Record gt Quality see page 25 for details 5 Cue the device and start playback at the beginning of the scene you wish to record 6 Press REC to start recording e To pause recording press PAUSE II e To resume recording press PAUSE II again 7 When finished press STOP E to stop recording e The disc is updated with the new recording This may take a few min utes to complete e To watch your recording see page 32 motes on DV Recording Connect a DV compatible camcorder to the front panel DV jack with a IEEE 1394 4 pin DV cable not included A single DV cable is used for input and output of audio video data and control signals After recording stops a DV control bar appears on screen LEA gt gt lt lt You can use this control bar to Stop Play Pause Fast Forward and Rewin
35. rder is off Turn camcorder on and operate or DVIN to DVD Recorder is not properly shown on TV screen DVD Recorder s input is not set to Press INPUT to select the correct AV1 Front AV2 Rear S Video or DV input Can t play disc recorded on this The DVD R disc was not finalized Finalize the disc see page 37 DVD Recorder on another DVD player Some players will not play even a No solution finalized disc Cannot record or did not record The remaining blank space on the Use another disc successfully disc is insufficient The source you are trying to record is You cannot record the source copy protected When setting the recording channel Select the channel on the DVD the channel is tuned to the TV sown Recorder s built in TV tuner tuner Timer Recording does not work DVD Recorder is not set to the Set date and time see page 22 correct time Timer has been programmed Reprogram Timer see page 31 incorrectly TIMER indicator light does not appear after programming timer Po DVD Recorder is on Turn off the DVD Recorder Stereo Audio Recording and or TV is not Stereo compatible No solution Playback not present Broadcast program is not in stereo No solution format DVD Recorder A V Out jacks are not Make A V connections Stereo is connected to TV A V In jacks available only via A V output from DVD Recorder DVD Recorder Audio Video Out is not Select AUX or A V source as TV input selected for vie
36. ropped or damaged in any way When the product exhibits a distinct change in performance this indicates a need for service Replacement Parts When replacement parts are required be sure the service techni cian has used replacement parts specified by the manufacturer or that have the same characteristics as the original part Unauthor ized substitutions may result in fire electric shock or other hazards Safety Check Upon completion of any ser vice or repairs to this product ask the service technician to perform safety checks to deter mine that the product is in proper operating condition Heat The product should be situated away from heat sources such as radiators heat registers stoves or other products including amplifiers that produce heat Wall or Ceiling Mounting The product should be mounted to a wall or ceiling only as recommended by the manufacturer Welcome This Chapter provides a basic introduction to the DVD Recorder including an overview of the front panel rear panel and remote control 6 DVD Recorder User s Guide Unpacking Check to make sure the following items are included with your DVD Recorder Remote Control AAA Batteries Audio Video Cable Power Cable User s Guide Quick Reference Guide Registration Card Blank Disc Compatible Media This DVD Recorder will play the following discs e DVD e Audio CD e Video CD Super Video CD Q e MP3 files on CD R RW e JPEG files on
37. rs Use a damp cloth for cleaning Attachments Do not use attachments not recommended by the product manufacturer as they may cause hazards Water and Moisture Do not use this prod uct near water for example near a bath tub wash bowl kitchen sink or laundry tub ina wet basement or near a swimming pool and the like Accessories Do not place this product on an unstable cart stand tripod bracket or table The product may fall causing serious injury to a child or adult and serious damage to the product Use only with a cart stand tripod bracket or table recommended by the manufacturer or sold with the product Any mounting of the product should follow the manufacturer s instructions and should use a mounting accessory recommended by the manufacturer A product and cart combination should be moved with care Quick stops exces sive force and uneven surfaces may cause the product and cart combination to overturn Ventilation Slots and openings in the cabi net are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating These openings LRT a PORTABLE CART WARNING Symbol provided by RETAC DVD Recorder User s Guide 11 12 13 14 15 must not be blocked or covered The open ings should never be blocked by placing the product on a bed sofa rug or other similar surface This product should not be placed in a built in installatio
38. system or digital audio receiver you can enjoy superior sound quality Stereo Good 1 Connect stereo audio cables from the DVD Recorder to your stereo system as shown Optical Best OR fa Connect a digital optical OR coaxial cable from the DVD Re corder to your digital audio receiver as shown Coaxial Best 2 Select the appropriate audio input on your stereo or receiver to hear the DVD Recorder If you used either of the digital connections you just activate the digital audio output in the Setup menu see page 26 AUDIO IN ANTENNA IN ANTENNA PASSTHROUGH NO DVD OUTPUT S VIDEO IN DVD Recorder COMPONENT OUT AV OUT Coaxial L AUDIO R OPTICALIN COAXIAL IN A V Receiver NOTE If you use the Optical or Coaxial connection you must set the DVD Recorder s Audio Output settings to match the capabilities of your receiver see page 26 f your receiver is equipped with a Dolby Digital and or DTS decoder your can enjoy 5 1 surround sound playback while watching DVD movies 2 Connections 1 7 Rear AV Connections You can view and record from an external device such as a VCR connected to the rear AV or S Video inputs 1 Connect standard audio video cables from the outputs of the external device to the inputs of the DVD Recorder as shown OR Connect an S Video cable and audio cables from the outputs of the external device to the inputs of the DVD
39. tored in the DVD Recorder to match the channel order stored in your TV set 1 Use a v to select the channel to be swapped and press gt 2 Press a to select Swap With and press ENTER 3 Use 4 a v toenterthe new Chan nel Number and press ENTER The channels will swap positions e Repeat as necessary e When finished select Exit and press ENTER Formatting Finalizing Discs Whati is Formatting Formatting completely erases a DVD RW so it can be recorded on again e You cannot erase and reformat a DVD R disc e Make sure you have safely backed up your DVD RW disc before refor matting because all contents will be erased Erasing a DVD RW To erase a DVD RW disc 1 Press GUIDER amp to display the Easy Guider menu 2 Press a to select Erase and then press ENTER Playback T Record 2 Erase inalize 3 Press ENTER again to confirm that you wish to erase and reformat the disc 4 When the disc formatting process is complete press ENTER to exit the Easy Guider Whati is Finalizing Finalizing a DVD R locks its record ings in place so the disc can be played on most standard DVD players or computers equipped with DVD ROM drives After you have finalized a DVD R disc you cannot edit or record anything else on that disc Finalizing is not necessary when us ing a DVD RW disc Finalizing a DVD R To finalize a DVD R disc 1 2 Press GUIDER to display the Easy Guider
40. wing at the TV Remote control does not work The remote control is not pointed Point the remote control at the properly at the remote sensor of the DVD remote sensor of the DVD Recorder Recorder The remote control is too far from the Operate the remote control within DVD Recorder 10 ft 3 m There is an obstacle in the path of Remove the obstacle the remote control and the DVD Recorder The batteries in the remote control Replace the batteries with new ones are exhausted 40 DVD Recorder User s Guide Technical Specifications General Power Supply Power Consumption Operating Temp Operating Humidity Dimensions W H D Net Weight Tuner Signal Tuner System Connections Front Panel Video Input Audio L R Input IEEE 1394 Input Rear Panel Video Input Audio L R Input S Video Input Video Output Audio L R Output S Video Output Component Prog Scan Output Digital Audio Output Media Playable Media DVD R RW DVD R RW DVD ROM CD R RW CD ROM AC 100 240V 50 60 Hz 36W 5 40 C 36 104 F 5 80 RH 420 x 66 x 268 mm 2 8 kg UHF VHF CATV NTSC RCA Connector yellow x1 RCA Connector white red x1 Mini jack x1 RCA Connector yellow x1 RCA Connector white red x1 4 Pin Mini DIN x1 RCA Connector yellow x1 RCA Connector white red x1 4 Pin Mini DIN x1 Y Pb Pr Green Blue Red x1 Coaxial x1 Optical x1 Playable Formats DVD Video DVD VR Video CD Super VCD Audio CD
41. you can listen to Recorder signal output the sound from the DVD Recorder The audio cables are not connected Connect the audio cable securely securely The power of the equipment Turn on the equipment connected connected with the audio cable is with the audio cable turned off PO The audio cables are damaged Replace with new ones DVD Recorder does not start No disc is inserted Insert a disc Check that the disc playback indicator on the front panel display is lit An unplayable disc is inserted Insert a playable disc Check the disc type color system and regional code The disc is placed upside down oris Place the disc with the playback side not placed within the guide down inside the guide Pe The disc is dirty Clean the disc The Parental Control is set Cancel the Parental Control function or change the rating level Picture from external input is The video signal from the external Connect the component directly to distorted component is copy protected your TV Some channels are skipped over The skipped channels were deleted See Add Delete Channels on page when using CH a w with the Add Delete feature 27 or page 36 5 Help 39 Troubleshooting Picture or sound of broadcasting Antenna or cables are loose Tighten connections or replace cable channel is weak or missing Wrong TV Signal is selected in the See TV Signal on page 27 DVD Recorder Setup menu Camcorder image via A V input Camco
Download Pdf Manuals
Related Search