Fujitsu S6240 User's Manual
Contents
1. 12 Advanced Menu Keyboard Mouse Features Submenu of the Advanced Menu The Keyboard Mouse Features submenu is for setting the parameters of the integrated and external mouse and keyboard Advanced Keyboard Mouse Features Item Specific Help Numlock Hot Plug Internal Pointing Device Initialization on Resume PhoenixBIOS Setup Utility auto Enabled Auto Disabled Fast Select Item Select Menu Selects power on state for Numlock Change Values Select gt Sub Menu Setup Defaults Save and Exit Figure 6 Keyboard Mouse Features Submenu Table 6 Fields Options and Defaults for the Keyboard Mouse Submenu of the Advanced Menu Always Disabled Menu Field Options Default Description Numlock Auto Auto Sets the NumLock function state when the computer completes boot m On ing Off On Padlock Off Hot Plug Disabled Enabled Enables and disables the ability to plug a mouse or keyboard into m Enabled the PS 2 port and have it immediately recognized and active Internal Pointing Auto Disabled Auto Disabled Sets the device controlling the mouse cursor on the screen Always Device Manual Setting Enabled makes the pointing device always enabled whether there is an Always Enabled external mouse or not Always Disabled makes the pointing device n always disabled Auto Disabled disables the internal pointing device when an external pointing device is connected to the PS2. Exit Item Specific Help Press lt Enter gt key to set Supervisor Password to enable any password features Then password entry is required to enter BIOS Setup Setup Defaults Save and Exit Table 13 Fields Options and Defaults for the Security Menu Menu Field Options Default Description Supervisor Clear A display only field Set is displayed when the system Supervisor Password is Password is set and Clear when it is not User Password is Clear A display only field Set is displayed when the general User Password is set and Clear when it is not Set Supervisor Enter Enter Sets changes or cancels Supervisor Password The Supervisor Password Password may be up to seven characters long and include only letters or numbers no symbols Passwords are NOT case sensitive To cancel a password press the Enter key instead of entering characters in the Enter New Pass word field and in the Re enter New Password field When a Supervisor Password is set it must be used to access the BIOS setup utility Set User Password Enter Enter This field can only be accessed if the Supervisor Password is set Sets changes or cancels the User Password The User Password may be up to seven characters long and must include only letters or numbers no symbols Passwords are NOT case sensitive To cancel a password press the Enter key instead of entering characters in the Enter New Password fie
3. MEIJEN Select Enhanced On Battery Battery Optimized Intel R SpeedStep R On AC Maximum Performance Technology enabled or disabled XD Bit functionality Enabled Select Item Change Values Setup Defaults Select Menu Select gt Sub Menu Save and Exit Figure 9 CPU Features Submenu Table 9 Fields Options and Defaults for the CPU Features Submenu of the Advanced Menu Menu Field Options Default Description SpeedStep R Disabled Enabled Enables or disables SpeedStep R Technology which allows the Technology Enabled user to determine the CPU performance when the tablet is run ning on AC or battery This technology decreases power consump tion by decreasing CPU speeds On Battery m Maximum Performance Battery Allows the user to select the CPU performance when the system is Battery Optimized Optimized running on battery power Automatic On AC Maximum Performance Maximum Allows the user to select the CPU performance when the system is Battery Optimized Performance running on AC power Automatic XD Bit Enabled Enabled Allows the user to enable and disable the Execute Disable functionality Disabled Bit functionality Execute Disable Bit allows the processor to classify areas in memory where application code can and cannot execute In the event an internet worm attempts to insert code in the buffer the processor disables code execution to prevent damage or worm propa
4. Wake up on LAN Disabled Btttone Volume Setting Middle ACPI OS ignores this setting Select Item Change Values Setup Defaults Select Menu Select gt Sub Menu Save and Exit Figure 11 Miscellaneous Configurations Submenu Table 11 Fields Options and Defaults for the Miscellaneous Configurations Submenu Menu Field Options Default Description Power Button Disabled Disabled When Disabled is selected the power button does not respond to a Power Off press When Power Off is selected the button turns the power off Wake up on LAN Disabled Disabled When Enabled is selected the system will wake up when the internal Enabled LAN device receives a Magic Packet while the system is powered off Volume Setting Off Middle Allows you to set or disable the system volume level Minimum Middle Maximum 18 Event Logging Submenu of the Advanced Menu Advanced Menu The Event Logging Submenu configures event logging features for DMI events Advanced PhoenixBIOS Setup Utility ER a me Event Log Capacity Event Log Validity View Event Log Event Logging System Boot Event Clear All Event Logs Mark Events as Read Select Select Space Available Valid Enter Enabled Disabled No Enter Item Menu Change Values Select gt Sub Menu Press lt Enter gt key to view the contents of the event log Setup Defaults
5. Environment Enabled Boot Device Selects the Boot Device qe This menu allows setting up the source for the operating system Priority Priority submenu See Boot Device Priority Submenu in the following section 24 The Boot Device Priority Submenu of the Boot Menu The Boot Device Priority Submenu is for setting the order of checking of sources for the operating system PhoenixBIOS Setup Utility Boot Device Priority Item Specific Help Floppy Disk Drive Hard Disk Drive CD ROM Drive Network Boot Keys used to view or configure devices lt Enter gt expands or collapses devices with a or lt Ctrl Enter gt expands all lt Shift 1 gt enables or disables a device lt gt lt Space gt or lt gt moves the device up or down lt d gt removes a device that is not installed Select Item Change Values Setup Defaults Select Menu Select gt Sub Menu Save and Exit Figure 17 Boot Device Priority Submenu Table 17 Fields Options and Defaults for the Boot Device Priority Submenu of the Boot Menu Menu Field Description Floppy Disk Drive The boot selections determine the order in which the BIOS searches for the operating system during a startup H sequence To change the order highlight one source by using the up or down cursor keys and then press the Hard Disk Drive or key to change the order number for that source Be sure to save your
6. The Setup Utility to make any changes See Navigating Through the Setup Utility on page 2 for more information The following tables show the names of the menu fields for the Main menu and its submenus all of the options for each field the default settings and a description of the field s function and any special information needed to help understand the field s use Note that the actual drive labels shown may vary System time and date can also be set from your operating system without using the setup utility Use the Date and Time icon on your Windows Control panel or type time or date from the MS DOS prompt PhoenixBIOS Setup Utility Advanced Security 0A 34 56 06 22 2005 System Time System Date gt Serial ATA Port 0 gt Primary Master Language English US Select Item Select Menu Figure 1 Change Values Select gt Sub Menu Info Exit Item Specific Help Adjust calendar clock FUJITSU MHT2060AT PL PATA MATSHITADVD RAM UJ 840S PM lt Tab gt lt Shift Tab gt or lt Enter gt selects field Setup Defaults Save and Exit Main Menu Table 1 Fields Options and Defaults for the Main Menu Menu Field Options Default Description System Time Sets and displays the current time Time is in a 24 hour format of hours minutes seconds with 2 digits for each HH MM SS Example 16 45 57 You may change each segment of the time separa
7. case sensitive To cancel a password press the Enter key instead of enter ing characters in the Enter New Password field and in the Re enter New Password field When a Serial ATA Port O Password is set it must be used to access the hard disk Data on the hard disk cannot be read on other systems Set Primary Enter Not currently available Master Password Password Entry on Disabled Enabled When this is disabled it is not necessary to enter the password before booting The Boot Enabled hard disk is still password protected without entering a password 22 Owner Information Submenu of the Security Menu The Owner Information Submenu is for setting owner information Note that Owner Information cannot be set without having entered a supervisor s password PhoenixBIOS Setup Utility Owner Information Item Specific Help Owner Information Is Clear Press lt Enter gt key to set owner information Set Owner Information Enter Up to 80 characters can be set Available Foreground Color Gray characters are ASCII Background Color Black codes from 32 through 126 The owner information is always displayed at the bottom line of the screen during POST Select Item Change Values Setup Defaults Select Menu Select gt Sub Menu Save and Exit Figure 15 Owner Information Submenu Table 15 Fields Options and Defaults for the Owner Information Submenu of the Security Menu Note The f
8. changed order when you exit the BIOS setup utility CD ROM Drive Network Boot Network Boot only appears if Preboot Execution Environment is enabled 25 yore S Series Notebook BIOS Be aware of the operating environment when booting from a CD ROM or you may overwrite files by mistake Booting from a Thumb Flash Drive To boot up the system using a thumb flash drive perform the following steps note that a third party utility is required in order to make the USB drive bootable Insert the drive into a USB port and power up the system When the Fujitsu logo appears press the F2 key Go to the Boot tab and scroll down to Boot Device Priority and press the Enter key Arrow down to Hard Disk Drive and press the Enter key Arrow down to select the XXXMB Hard Drive USB Press the Space bar until the USB Hard Drive moves to the top of the list Press the F10 button then click Yes to exit the setup utility A NOAN Aun gt Exiting from Boot Menu When you have finished setting the boot parameters with the Boot menu you can either exit from the setup utility or move to another menu If you wish to exit from the setup utility press the Esc key to go to the Exit menu If you wish to move to another menu use the cursor keys 26 INFO MENU DISPLAYS BASIC SYSTEM INFORMATION The Info menu is a display only screens that provides the configuration inf
9. its submenus the options for each field the default settings and a description of the Entering a password incorrectly three times in a row will cause the keyboard and mouse to be locked out and the warning System Disabled to be displayed If this happens restart the computer by turning off and on the power with the power switch and use the correct password on reboot If you set a password write it down and keep it in a safe place If you forget the password you will have to contact your support representative to regain access to your secured functions and data If you make an error when re entering the password a Warning will be dis played on the screen To try again press the Enter key and then retype the pass word Press the Esc key to abort the password setting process If the Password on Boot is Disabled you will not have to type your password upon resuming the system from the Sus pend or Save to Disk modes PhoenixBIOS Setup Utility Main Advanced Boot Info Supervisor Password Is Clear User Password Is Clear Set Supervisor Password ES Set User Password Enter Minimum User Password Length 0 Password on Boot Disabled On Automatic Wake up Disabled KB Lock on Resume Disabled Boot from Removable Media A11 Flash Write Enabled gt Hard Disk Security gt owner Information Select Item Change Values Select Menu Select Sub Menu Figure 13 Security Menu 20
10. method for moving data to from the drive Autotype the m Fast PIO 1 drive to select the optimum transfer mode This option cannot be m Fast PIO 2 changed when Auto is selected Fast PIO 3 m Fast PIO 4 m Multiword DMA 1 m Multiword DMA 2 Ultra DMA Disabled Disabled Selects the method for moving data to from the drive Autotype the Mode m Mode 0 drive to select the optimum transfer mode This option cannot be Mode 1 changed when Auto is selected Mode 2 m Mode 3 m Mode 4 m Mode 5 A bootable CD ROM may have either a floppy disk or hard drive format When the bootable CD ROM is used the drive allocations change automatically without changing the BIOS setup If a floppy disk format CD ROM is used the CD ROM becomes Drive A The CD ROM will only take drive C hard drive for mat if the internal hard drive is not present or is disabled The bootable CD ROM can never use a C des ignation if a formatted internal hard drive is present since the C designator is always reserved for the internal hard drive The boot sequence ignores the new drive designations however your application software will use the new designations Be aware of the operating environment when booting from a CD ROM or you may overwrite files by mistake Exiting from Main Menu When you have finished setting the parameters on this menu you can either exit from the setup utility or move to another menu If you wish to exit from the setup
11. 2 port Note that use of the PS 2 port with this system is possible only when using an optional port replicator Initialization on Resume Fast Normal Fast When Fast is selected initialization for the external devices is optimized to speed up on Resume When Normal is selected initializa tion is not optimized 13 ES S Series Notebook BIOS Video Features Submenu of the Advanced Menu The Video Features Submenu is for setting the display parameters PhoenixBIOS Setup Utility Advanced Video Features Item Specific Help Display Auto Select display terminal Compensation Enabled This setting is not effective after operating system starts up Select Item Change Values Setup Defaults Select Menu Select Sub Menu Save and Exit Figure 7 Video Features Submenu Table 7 Fields Options and Defaults for the Video Features Submenu of the Advanced Menu Menu Field Options Default Description Display Internal Flat Panel Auto Selects where the video signal will be routed Note that m External the Windows video driver settings override this setting m Auto Compensation Disabled Enabled Enables or disables display compensation Enabled 14 Advanced Menu Internal Device Configurations Submenu of the Advanced Menu The Internal Device Configuration submenu allows the user to configure other internal devices PhoenixBIOS Setup Uti
12. Interrupt IRQ 7 Select Item Change Values Setup Defaults Select Menu Select gt Sub Menu Save and Exit Figure 5 Serial Parallel Port Configuration Submenu 11 poe S Series Notebook BIOS Table 5 Fields Options and Defaults for Serial Parallel Port Configuration Submenu of Advanced Menu Menu Field Options Default Description Serial Port Disabled Enabled Configures the serial port using either no configuration Disabled a user Enabled defined configuration Enabled or by allowing the BIOS or OS to choose m Auto the configuration Auto 1 0 Address m 3F8 3FF 3F8 3FF Allows user to set the serial port base 1 O address when serial port is m 2F8 2FF Enabled m 3E8 3EF m 2E8 2EF Interrupt IRQ3 IRQ 4 Allows user to set the serial port interrupt when serial port is Enabled IRQ4 IRQ 10 m RQ 11 Infrared Port Disabled Enabled Configures the infrared port using either no configuration Disabled a a Enabled user defined configuration Enabled or by allowing the BIOS or OS to n Auto choose the configuration Auto Mode IrDA FIR When the infrared port is enabled this option is available allowing the user FIR to set the mode for the infrared port Standard IrDA IrDA 1 0 transmits data at up to 115 2 Kbps FIR IrDA 1 1 transmits at up to 4Mbps I O Address m 3F8 3FF 2E8 2EF Allows user to set the infrared port I O a
13. Options and Defaults for the Advanced Menu Menu Field Description Serial Parallel Port Configurations When selected opens the Serial Parallel Port Configurations submenu which allows the user to modify settings for serial infrared and parallel ports Keyboard Mouse Features When selected opens the Keyboard Mouse Features submenu which allows setting external and internal keyboard and mouse parameters Video Features When selected opens the Video Features submenu which allows setting of the display parameters including routing of video signals to different displays Internal Device Configurations When selected opens the Internal Device Configuration submenu which allows enabling or disabling the modem IDE and LAN Controllers CPU Features When selected opens the CPU Features submenu which allows you to change the Intel R Speed Step R Technology settings USB Features Configures USB features Miscellaneous Configurations Configures miscellaneous features such as Wake Up On LAN and Power Button Event Logging When selected opens the event logging submenu 10 Advanced Menu Serial Parallel Port Configuration Submenu of the Advanced Menu The Serial Parallel Port Configuration submenu provides the ability to set the I O addresses and interrupt levels for the serial infrared and parallel I O addresses DMA channels and Interrupt levels can be enter
14. Save and Exit Figure 12 Event Logging Submenu Table 12 Fields Options and Defaults for the Event Logging Submenu of the Advanced Menu Menu Field Options Default Description Event Log Space Available Display only Capacity Event Log Validity Valid Display only View Event Log Enter Enter Allows you to view content of event log Event Logging Disabled Enabled Turns event logging on and off for all DMI events Enabled System Boot Disabled Disabled Turns event logging on and off for DMI system boot events Event Enabled Clear All Event No No When set to Yes all event logs will be cleared at next boot Logs Yes Mark Events as Enter Enter Allows you to make all events currently in the event log as read Read 19 po S Series Notebook BIOS SECURITY MENU SETTING THE SECURITY FEATURES The Security menu allows you to set up the data security field s function and any special information needed to features of your notebook to fit your operating needs and help understand the field s use The default condition is to view the current data security configuration Follow the no passwords required and no write protection instructions for Navigating Through the Setup Utility to make any changes See Navigating Through the Setup Utility on page 2 for more information The following tables show the names of the menu fields for the Security menu and
15. curity submenu which allows you to configure hard disk security features Owner Information When selected opens the Owner Information submenu which allows you to set Owner information 21 pon S Series Notebook BIOS Hard Disk Security Submenu of the Security Menu The Hard Disk Security Submenu is for configuring hard disk security features PhoenixBIOS Setup Utility Hard Disk Security Item Specific Help Serial ATA Port 0 Password Is Clear Primary Master Password Is Not Available Set Serial ATA Port 0 Password Enter Set Primary Master Password Enter Password Entry on Boot Enabled Select Item Change Values Setup Defaults Select Menu Select gt Sub Menu Save and Exit Figure 14 Hard Disk Security Submenu Table 14 Fields Options and Defaults for the Hard Disk Security Submenu of the Security Menu Note The fields on this submenu cannot be changed unless the Supervisor Password is set Menu Field Options Default Description Serial ATA Port O A display only field Set is displayed when the Serial ATA Port O Password is set Password Is and Clear when it is not Primary Master A display only field Not Available is displayed Password Is Set Serial ATA Port Enter Sets changes or cancels Serial ATA Port O Password The password may be up to O Password seven characters long and include only letters or numbers no symbols Passwords are NOT
16. cy Fu ITsu Fujitsu LifeBook S Series BIOS Guide LifeBook S Series Model S6240 Document Date 6 24 2005 Documen t Number FPC58 1353 01 FUJITSU COMPUTER SYSTEMS po S Series Notebook BIOS S Series BIOS BIOS SETUP UTILITY The BIOS Setup Utility is a program that sets up the operating environment for your notebook Your BIOS is set at the factory for normal operating conditions therefore there should be no need to set or change the BIOS environment to operate your notebook The BIOS Setup Utility configures Device control feature parameters such as changing T O addresses and boot devices System Data Security feature parameters such as passwords Entering the BIOS Setup Utility To enter the BIOS Setup Utility do the following 1 Turn on or restart your notebook 2 Press the F2 key when a message appears under the Fujitsu logo prompting you to Press lt F2 gt BIOS Setup This will open the main menu of the BIOS Setup Utility with the current settings displayed 3 Press the arrow keys to scroll through the other setup menus to review or alter the current settings Navigating Through the Setup Utility The BIOS setup utility consists of six menus Main Advanced Security Boot Info and Exit This document explains each menu in turn including all submenus and setup items The following procedures allow you to navigate the setup utility menus 1 To select a menu use the cu
17. ddress when the infrared port is m 2F8 2FF Enabled m 3E8 3EF 2E8 2EF Interrupt IRQ3 IRQ 3 Allows user to set the infrared port interrupt when the infrared port is IRQ4 Enabled IRQ 10 m IRQ11 1 0 Address 400 43F 400 43F Allows user to set the FIR port I O address when the infrared port is 480 4BF Enabled 500 53F 580 5BF DMA Channel DMA 1 DMA 3 Allows user to set the infrared port DMA Channel when the infrared port DMA3 mode is set to FIR Parallel Port Disabled Enabled Configures the parallel port using either no configuration Disabled a Enabled user defined configuration Enabled or by allowing the BIOS or OS to m Auto choose the configuration Auto Mode Output Only Bi directional When the parallel port is enabled this option is available allowing the user m Bi directional to set the mode for the parallel port Bi directional allows two way m ECP transfer of information between your notebook and a parallel device Output Only Half Duplex allows information to be transferred in only one direction from your notebook to the printer or similar device ECP Mode allows communication with the ECP class of parallel 1 O devices 1 0 Address 378 37F 378 37F Allows user to set the parallel port base 1 O address when the parallel port m 278 27F is Enabled 3BC 3BF Interrupt IRQ5 IRQ 7 Allows user to set the parallel port interrupt when the parallel port is IRQ7 Enabled
18. ed in various ways including via the BIOS setup utility the control software for the I O device or the hardware If any two ports or devices serial or parallel have the same I O address assigned your notebook will not ports of your notebook Use of the parallel and serial ports with this system is possible only with the optional port replicator To prevent IRQ and address conflicts function normally Please keep a record of avoid changing the default settings If original settings before making any you must change the settings you can changes in the event that a restoration is call 1 800 8Fujitsu for technical assis required See your hardware and software tance documentation as well as the setup utility The BIOS will warn you of resource con to determine settings limitations etc flicts by placing a yellow asterisk next to each device that is in conflict All I O addresses in Table 5 are in hexa decimal PhoenixBIOS Setup Utility Advanced Serial Parallel Port Configurations Item Specific Help Serial Port Enabled Disabled I O Address 3F8 3FF The port is disabled Interrupt IRQ 4 Infrared Port Enabled Enabled Mode FIR The port is enabled I O Address 2E8 2EF with user configuration Interrupt IRQ 3 I O Address 400 43F Auto DMA Channel DMA 3 Plug amp Play OS Parallel Port Enabled configure the port Mode Bi directional I O Address 378 37F
19. ere it will give you the opportunity to modify the settings of the setup utility as described in the following steps 1 When you turn on or restart the computer there is a beep and or the following message appears on the screen Error message please run SETUP program Press lt F1 gt key to continue lt F2 gt to run SETUP 2 Ifan error message is displayed on the screen and you want to continue with the boot process and start the operating system anyway press the F1 key i If your notebook emits a series of beeps that sounds like a code and the display is blank refer to the Troubleshooting sec tion of your system Use s Guide The Troubleshooting Section includes a list of error messages and their meanings f your data security settings require it you may be asked for a password before the setup utility will be opened 3 If an error message is displayed on the screen and you want to enter the setup utility press the F2 key 4 When the setup utility starts with a fault present the system displays the following message Warning Error message Continue 5 Press any key to enter the setup utility The system will then display the Main Menu with current parameters values po S Series Notebook BIOS MAIN MENU SETTING STANDARD SYSTEM PARAMETERS The Main Menu allows you to set or view the current system parameters Follow the instructions for Navi gating Through
20. gation 16 Advanced Menu USB Features Submenu of the Advanced Menu The USB Features Submenu enables and disables legacy USB support for your system PhoenixBIOS Setup Utility Advanced USB Features Item Specific Help Legacy USB Support Enabled Disabled SCSI SubClass Support Enabled The feature is disabled Enabled Legacy USB Emulation is enabled and USB devices are available without USB aware OS Select Item Change Values Setup Defaults Select Menu Select gt Sub Menu Save and Exit Figure 10 USB Features Submenu Table 10 Fields Options and Defaults for the USB Features Submenu of the Advanced Menu Menu Field Options Default Description Legacy USB Support Disabled Enabled When Disabled is selected legacy USB emulation is disabled When Enabled Enabled is selected legacy USB emulation is enabled and USB devices are available without USB aware OS SCSI SubClass Support Disabled Enabled When Enabled is selected USB devices that belong to the SCSI sub Enabled class in the mass storage class e g USB Memory Key are enabled 17 yoo S Series Notebook BIOS Miscellaneous Configurations Submenu of the Advanced Menu The Miscellaneous Configurations Submenu configures the miscellaneous features for your system PhoenixBIOS Setup Utility Advanced Miscellaneous Configurations Item Specific Help SELES aia Configures the power
21. he Setup Utility to make any changes See Navigating Through the Setup Utility on page 2 for more information The following table shows the names of the menu fields for the Exit menu the default settings and a description of the field s function and any special information needed to help understand the field s use PhoenixBIOS Setup Utility Main Advanced Security Boot Exit Item Specific Help Exit Saving Changes Exit Discarding Changes Load Setup Defaults Discard Changes Save Changes Save Changes and Power Off Exit System Setup and save your changes to CMOS Select Item Select Menu Setup Defaults Save and Exit Help Exit Change Values Select gt Sub Menu Figure 19 Exit Menu Table 19 Fields Options and Defaults for the Exit Menu Exit Discarding Menu Field Description Exit Saving Exit Saving Changes and Exit will store all the entries on every menu of the setup utility to the BIOS memory and Changes then exit the setup utility A confirmation message Save Configuration changes and exit now Yes No will be displayed Selecting Exit Discarding Changes and Exit will exit the setup utility with out writing to the BIOS memory When the Changes BIOS recognizes this selection it will load the operating system and begin operation Load Setup Selecting Load Setup Defaults will load the factory preset default values for all menu fields then display the message Defaults Load defaul
22. ields on this submenu cannot be changed unless the Supervisor Password is set Menu Field Options Default Description Owner Clear Display only Information Is Set Owner Enter Field to write owner infor Information mation e g your name Foreground Black Red m Gray Light Red Gray Set foreground color Color Blue Magenta Light Blue Light Magenta m Green Brown Light Green Yellow m Cyan White Light Cyan m Bright White Background Black Red Gray Light Red Black Sets background color Color Blue Magenta Light Blue Light Magenta m Green Brown Light Green Yellow m Cyan White Light Cyan Bright White Exiting from the Security Menu When you have finished setting the parameters on the Security Menu you can either exit from setup utility or move to another menu If you wish to exit from setup utility press the Esc key to go to the Exit Menu If you wish to move to another menu use the cursor keys 23 oo S Series Notebook BIOS BOOT MENU SELECTING THE OPERATING SYSTEM SOURCE The Boot Menu is used to select the order in which the BIOS searches sources for the operating system Follow the instructions for Navigating Through the Setup Utility to make any changes See Navigating Through the Setup Utility on page 2 for more information The following tables show the names of the menu fields for the Bo
23. ld and in the Re enter New Password field When a User Password is set it must be used to access the BIOS setup utility Minimum User 0 0 Sets the minimum length for User Password Password Length Password on Boot Disabled Disabled When Enabled a password User or Supervisor is required after the First Boot Power On Self Test POST before the operating system will be read from Every Boot a disk When set to Disabled no password is required If no Supervisor Password is set this feature is not available and no password is required On Automatic Disabled Disabled This field is active only when Password On Boot is set to First Boot or Wake up Enabled Every Boot When disabled password entry is not required on automatic wake up on LAN or Real Time Clock When enabled the password is still required on automatic wake up KB Lock on Disabled Disabled When set to Enabled the PS 2 keyboard and mouse inputs are locked Resume Enabled out upon Suspend from Resume or Save to Disk mode until the pass word is entered When both passwords are set the User password is always used to lock Password entry before OS boot is disabled upon unattended boot Boot from All All Enable password allows supervisor access only Removable Media Supervisor only Flash Write Disabled Enabled When disabled the BIOS Flash memory is write protected Enabled Hard Disk Security When selected opens the Hard Disk Se
24. lity Advanced Internal Device Configurations Item Specific Help Disabled Serial ATA Controller Serial ATA port is AHCI COnfiguration Disabled disabled IDE Contoller Enabled LAN Controller Enabled Enabled Wireless LAN Enabled Serial ATA port is enabled Select Item Change Values Setup Defaults Select Menu Select gt Sub Menu Save and Exit Figure 8 Internal Device Configuration Submenu Table 8 Fields Options and Defaults for the Internal Device Configuration Submenu of the Advanced Menu Menu Field Options Default Description Serial ATA Controller Disabled Enabled Enables or disables serial ATA devices Enabled AHCI Controller Disabled Disabled Enables or disables the AHCI Advanced Host Controller Interface a Enabled This selection does not appear when Serial ATA Controller is dis abled IDE Controller Disabled Enabled Enables or disables the IDE port Enabled LAN Controller Disabled Enabled Enables or disables the LAN controller Enabled Wireless LAN Disabled Enabled Enables or disables the Wireless LAN device Enabled 15 yoo S Series Notebook BIOS CPU Features Submenu of the Advanced Menu The CPU Features Submenu allows you to change the settings for Intel R SpeedStep R Technology for your system PhoenixBIOS Setup Utility Advanced CPU Features Item Specific Help SpeedStep R Technology
25. menu identifies what Serial Note that actual hard drive label shown may vary ATA IDE devices are installed Depending on the drive type information such as cylin ders heads and sectors may also be displayed PhoenixBIOS Setup Utility Serial ATA Port 0 FUJITSU MHT2060AT PL PATA Item Specific Help Type ES Select Serial ATA IDE LBA Format drive installed here Total Sectors 117210240 Maximum Capacity 60012MB Auto The BIOS auto types the drive on boot time None The drive is disabled Select Item Change Values Setup Defaults Select Menu Select gt Sub Menu Save and Exit Figure 2 Serial ATA Port 0 Submenu Menu Field Options Default Description Type m Auto Auto Select Auto to have the type of Serial or Parallel ATA device auto m None matically identified by the BIOS at POST If None is selected the fol lowing Set up items do not appear LBA Format Logical Block Addressing LBA Total Sectors see The total number of sectors on your hard disk Maximum Capacity Sss The maximum capacity of your hard disk Primary Master Submenu of the Main Menu The Primary Master submenu identifies what primary devices are installed Note that actual hard drive label shown may vary Depending on the drive type information such as cylin ders heads and sectors may also be displayed PhoenixBIOS Setup Utility Primary Master MATSHITADVD RAM UJ 840S PM Item S
26. ormation for your notebook The information including CPU type and The following table shows the names of the menu fields speed and total memory displayed on this for the Info menu and the information displayed in screen varies according to the unit you those fields These fields are for information purposes purchased only and are not editable PhoenixBIOS Setup Utility Main Advanced Security Exit BIOS Version 1 06 BIOS Date 04 19 2005 BIOS Area E000h FFFFh CPU Type Intel R Pentium R M processor 750 CPU Speed 1 86 GHz L1 Cache 64 KB L2 Cache 2048 KB Total Memory 512 MB Memory Slot 1 None Memory Slot 2 512 MB DDR2 SDRAM Select Item Change Values Setup Defaults Select Menu Select gt Sub Menu Save and Exit Figure 18 Info Menu Table 18 Fields Options and Defaults for the Info Menu Note that the parameters listed in the following table may be different depending upon your system configuration Menu Field Default Menu Field Default BIOS Version 1 06 L1 Cache 64 KB BIOS Date 04 19 2005 L2 Cache 2048 KB BIOS Area EOOOh FFFFh Total Memory 512 MB CPU Type Intel R Pentium R M processor 750 Memory Slot 1 None CPU Speed 1 86 GHz Memory Slot 2 512 MB DDR2 SDRAM 27 oo S Series Notebook BIOS EXIT MENU LEAVING THE SETUP UTILITY The Exit Menu is used to leave the setup utility Follow the instructions for Navigating Through t
27. ot menu and its submenu all of the options for each field the default settings and a description of the field s function and any special information needed to help understand the field s use PhoenixBIOS Setup Utility Main Advanced Security Quick Boot Boot Time Diagnostic Screen Boot Menu Preboot Execution Environment gt Boot Device Priority Select Item Select Menu Enabled Disabled Enabled Enabled Change Values Select gt Sub Menu Exit Item Specific Help Disabled All diagnostic tests will be done Info Enabled Some diagnostic tests may be skipped while booting to speed up Setup Defaults Save and Exit Figure 16 Boot Menu Table 16 Fields Options and Defaults for the Boot Menu Menu Field Options Default Description Quick Boot Disabled Enabled Turns on and off booting with a truncated set of Power On Self Enabled Tests Fewer tests mean faster turn on Boot Time Disabled Disabled Turns on and off display of test results instead of Fujitsu logo screen Diagnostic Screen a Enabled during Power On Self Test Boot Menu a Disabled Enabled When disabled the boot menu is disabled and the F12 key is Enabled ignored When enabled the boot menu is enabled Note This field cannot be changed unless the Supervisor Password is set Preboot Execution Disabled Enabled Turns on and off boot from network server options
28. pecific Help Type auto Multi Sector Transfers Disabled LBA Mode Control Transfer Mode Ultra DMA Mode Disabled Standard Disabled Select Item Select Menu Select ATA ATAPI drive installed here Auto The BIOS auto types the drive on boot time None The drive is disabled Change Values Setup Defaults Select gt Sub Menu Save and Exit Figure 3 Primary Master Submenu Table 3 Fields Options and Defaults for the Primary Master Submenu of the Main Menu Menu Field Options Default Description Type Auto Auto Selects the ATA ATAPI device type Select Auto to have the device CD m None ROM CD R RW DVD ROM etc automatically identified by the BIOS at POST If None is selected the following Set up items do not appear Multi Sector Disabled Disabled This option cannot be changed when Auto is selected Specify the num Transfers m 2 Sectors ber of sectors per block for multiple sector transfer m 4 Sectors m 8 Sectors 16 Sectors LBA Mode Disabled Disabled Enables or disables Logical Block Addressing in place of Cylinder Head Control m Enabled Sector addressing This option cannot be changed when Auto is selected yore S Series Notebook BIOS Table 3 Fields Options and Defaults for the Primary Master Submenu of the Main Menu Menu Field Options Default Description Transfer Mode Standard Standard Selects the
29. rsor keys gt 2 To select a field within a menu or a submenu use the cursor keys 4 y 3 To select the different values for each field press the Spacebar to change to the next higher selection and F5 or to go to the next lower selection 4 To activate a submenu press the Enter key 5 To return to a menu from a submenu press the Esc key 6 To go to the Exit menu from any other menu press the Esc key Selecting a field causes a help message about that field to be displayed on the right hand side of the screen Pressing the Enter key with the highlight on a selection that is not a submenu or auto selection will cause a list of all options for that item to be displayed Pressing the Enter key again will select the highlighted choice 7 Pressing the F9 key resets all items in the BIOS to the default values 8 Pressing the F10 key saves the current configura tion and exits the BIOS Setup Utility You will be asked to verify this selection before it is executed 9 Pressing the F1 key gives you a general help screen Entering the Setup Utility After a Configuration Change or System Failure If there has been a change in the system configuration that does not agree with the parameter settings stored in your BIOS memory or there is a failure in the system the system beeps and or displays an error message after the Power On Self Test POST If the failure is not too sev
30. t configuration now Yes No When confirmed the setup utility will return to the Exit Menu To return to another menu follow the directions in the Navigating Through the Setup Utility Section Discard Changes Selecting Discard Changes will load the previous values in BIOS memory for all menu fields The message Load previous now Yes No will be displayed When confirmed the utility will return to the Exit menu To return to another menu follow the directions in the Navigating Through the Setup Utility Section Save Changes Selecting Save Changes causes the new settings in all menus to be written to the BIOS memory The message Save configuration changes now Yes No will be displayed When confirmed the setup utility will return to the Exit menu To go to another menu follow the directions in the Navigating Through the Setup Utility section Save Changes and Power Off Selecting Save Changes and Power Off will cause the new settings in all menus to be written to the BIOS memory then power the system off The message Save configuration changes and power off now Yes No will be displayed When confirmed the setup utility shut down the system 28
31. tely Move between the segments with the Tab key and or Shift Tab keys System Date Sets and displays the current date Date is in a month day year numeric format with 2 digits each for month and day and 4 digits for year MM DD YYYY for example 03 20 1998 You may change each segment of the date separately Move between the segments with the Tab key and or Shift Tab keys Table 1 Fields Options and Defaults for the Main Menu Menu Field Options Default Description Serial ATA Port O Selects the Serial ATA Port O submenu The product of the Serial ATA IDE Drive Display the type of device on this ATA ATAPI interface if there is one Pressing the Enter key selects the Serial ATA Port O submenu allowing additional device configuration options for this interface Primary Master Selects Primary Master submenu The product of the Hard Drive Display the type of device on this ATA ATAPI interface if there is one Pressing the Enter key selects the Primary Master submenu allowing additional device configuration options for this interface Language English US Japanese JP English US The default setting differs between the US European and the Japanese model Selects the display language for the BIOS yore S Series Notebook BIOS Serial ATA Port O Submenu of the Main Menu The Serial ATA Port 0 sub
32. utility press the Esc key or use the cursor keys to go to the Exit menu or to move to another menu ADVANCED MENU SETTING DEVICE FEATURE CONTROLS The Advanced Menu allows you to Follow the instructions for Navigating Through the a Set the I O addresses for the serial and parallel ports Setup Utility to make any changes Set the features of the keyboard mouse Select between the display panel and or an external See Navigating Through the Setup Utility on page 2 for CRT display more information Set internal device configurations The following tables show the names of the menu fields Configure USB and CPU features for the Advanced Menu and its submenus all of the A eya miscellaneous features such as Wake Up On options for each field the default settings and a descrip tion of the field s function and any special information Configure DMI Event Logging needed to help understand the field s use PhoenixBI0S Setup Utility Advanced Security Boot Info Exit Item Specific Help Configures serial ports and parallel ports gt Serial Parallel Port Configurations gt Keyboard Mouse Features gt Video Features gt Internal Device Configurations gt CPU Features gt USB Features gt Miscellaneous Configurations PEvent Logging Select Item Change Values Setup Defaults Select Menu Select gt Sub Menu Save and Exit Figure 4 Advanced Menu LifeBook S Series Notebook BIOS Table 4 Fields
Download Pdf Manuals
Related Search