Fantom Vacuum FM625H User's Manual
Contents
1. 10 Plug unit in firmly Check fuse or breaker Replace fuse reset breaker Call 1 800 275 9251 Turn the unit off and unplug from outlet Allow unit to cool down then restart Empty and clean dust cup Turn unit off and unplug from wall outlet Remove Dust Cup Filter and check for object s in air duct and remove Clean or replace HEPA Filter Clean debris screen Clean exhaust filters and filter ring Empty and clean dust cup Review Dust Cup instructions Remove hose and or brushes Remove obstruction from hose and or brush Empty and clean dust cup Illustrations may differ from actual product Technical Specifications Voltage Power 120V 60Hz 12 Amps 1 Hand Grip 11 Dust Cup Cover 2 Hose Holder 12 Dust Cup 3 Flexible Hose 13 Trap Door Release Button 4 Carrying Handle 14 Motorized Floor Brush 5 Intelli Sense M Filter Monitor 15 Hose Handle 6 Handle Release 16 Pet Hair Brush 7 On Off Switch 17 Air Driven Turbo Brush 8 Exhaust Filter Cover x2 18 Nozzle Release Pedal 9 Dusting Brush 19 Power Cord Quick Release 10 Dust Cup Release 20 Extension Tube 21 Crevice Tool OPERATING INSTRUCTIONS WARNING Always remove the power plug from the wall outlet before assembling or removing accessories Inserting The Handle Into The Main Unit e Insert the handle into the hole on the top of the unit Make sure that the slot in the handle fits correctly into the openin2. FANT O M COMMERCIAL LIGHTWEIGHT UPRIGHT VACUUM OWNER S MANUAL Model FM625H 120V 60Hz 12 Amps Q FOR HOUSEHOLD OR COMMERCIAL USE FANTOM 94 Main Mill Street Door 16 Plattsburgh NY 12901 Tel 1 800 275 9251 Model FM625H FANT O M ONE 1 YEAR LIMITED WARRANTY FANTOM warrants this product to be free from defects in material and workmanship for a period of one 1 year from the date of the original purchase when utilized for normal commercial or household use subject to the following conditions exclusions and exceptions If your appliance fails to operate properly while in use under normal household conditions within the warranty period return the complete appliance and accessories freight prepaid to FANTOM 94 Main Mill Street Door 16 Plattsburgh N Y 12901 If the appliance is found by FANTOM to be defective in material or workmanship FANTOM will repair or replace it free of charge Proof of purchase date and 14 95 to cover the cost of return shipping and handling must be included Non durable parts including without limitation filters brushes and electrical parts which normally require replacement are specifically excluded from warranty The liability of FANTOM is limited solely to the cost of the repair or replacement of the unit at our option This warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used for commercial purposes T
3. Important Make sure that ALL filters are completely dry before re installing back in the vacuum On Off Switch The On Off switch has three different positions Fig 6 e Push on the side to turn the vacuum ON Set the vacuum here when using the removable hose handle with the accessories or when vacuuming bare floors e Push on the Il side to turn the motorized floor brush on e Push on the O side to turn the vacuum to the OFF position OFF ON gt Bare Floors Tools ON Carpet Using The Unit With The Motorized Floor Brush e Unwind the power cord and plug into the 120V outlet Press the On Off switch to the II position so that both the vacuum and the motorized floor brush is turned ON NOTE When vacuuming deep pile carpets or hard wood floors lower the angle of the handle for easier maneuverability Fig 7 aoe Fig 6 OPERATING INSTRUCTIONS Using The Unit With The Accessories j Remove the removable ii hose handle from the hose connector e Attach the extension tube crevice tool Ye the dusting brush pa pet hair brush or air Qe driven turbo brush I to the end of the TTH 7 hose Fig 8 i E Manual Variable Suction Control Your vacuum cleaner includes a variable suction control valve on the hose handle The suction power can be adjusted by moving the slide to the desired position For example Less suction
4. is required on upholstery and draperies compared to thick shag carpets which require maximum suction Extension Tube For hard to reach places Use with crevice tool or with dusting brush fi I N Crevice Tool For radiators crevices corners baseboards and between cushions Dusting Brush The dusting brush is used for the furniture venetian X blinds books lamp shades and shelves Pet Hair Removal Brush The pet hair removal brush is for use on upholstery drapes and other fabric surfaces to remove lint pet hair etc THE PET HAIR REMOVAL BRUSH IS NOT INTENDED TO BE USED AS A PET GROOMING DEVICE Fig 8 OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS Using The Unit With Air Driven Turbo Brush The efficiency of your air driven turbo brush depends on the bristle brush rotating at high speed Strong air suction is needed to accomplish this In order to ensure that maximum air suction is maintained please read the following instructions 1 Empty the dust cup frequently 2 Always vigorously TapClean the HEPA filter filter ring and the debris screen when emptying the dust cup container 3 Ensure that the rotating brush is kept free of hair and string which may accumulate and decrease brush performance 4 Keep air driven turbo brush turbine free of dirt and foreign matter See illustration for cleaning instructions Attaching the Air Driven Turbo Brush to the Flexible Hose
5. To use the air driven turbo brush to clean upholstery 1 Remove the flexible hose from the hose connector Fig 9 2 Push the air driven turbo brush onto the end of the flexible hose as far as it will go Important In order to ensure that maximum air suction is maintained empty the dust cup frequently and tap clean the HEPA filter filter ring and debris screen at the same time Ensure that the rotating brush is kept free of hair and string which may accumulate and decrease brush performance Cleaning Air Driven Turbo Brush Locking Latch Tilt Upwards oh E pr me P y DE Turbine From time to time the turbine of your turbo brush will require cleaning To do this 1 Remove the turbo brush from the hose or telescopic extension tube 2 Slide locking latch forward then tilt the top housing of the brush upwards The top housing is hinged and will tilt up approximately 45 only 3 There may be some dust lint hair etc on the turbine wheel Remove as much of this as possible 4 You may also use the unit s hose with crevice tool attached and use the vacuum to remove any additional debris from the turbine 5 Ensure that the turbine wheel moves freely by rotating it with your finger If the turbine does not rotate call Customer Service for help 6 Once clean close the top cover of the turbo brush and slide the locking latch toward the rear of the brush to lock 1 Intelli Sense F
6. ace and body Do not use outdoors or on wet surfaces Use only on dry surfaces Using improper voltage may result in damage to the motor and possible injury to the user Correct voltage is listed on rating label If the supply cord of this appliance is damaged it must only be replaced by FANTOM because special purpose tools are required Connect to a properly grounded outlet only See grounding instructions SAVE THESE INSTRUCTIONS For Household or Commercial Use Only GROUNDED OUTLET BOX GROUNDING BLADE IS LONGEST OF THE THREE BLADES Make sure that the appliance is connected to an outlet having the same configuration as the plug No adaptor should be used with this appliance 1 Rev 11 04 PRECAUTIONARY MEASURES IMPORTANT Ifthe suction opening in the unit or the hose is BLOCKED switch off the vacuum cleaner and remove the blocking substance before you start the unit again 1 Do not operate the vacuum cleaner 4 When pulling out the power plug too close to heaters radiators or from the wall outlet pull the plug not cigarette butts the power cord J Fa Aralar MA ra J A AA a a Y z a y 3 H 5 Do not pick up anything that is A burning or smoking such as cigarettes matches or hot ashes 2 Before inserting the power plug into the wall outlet make sure that your hands are dry NN P Z 6 Do not use without all filters in ST MEE place 3 Before you star
7. as cooled down for 45 minutes plug in the cleaner and push the On Off button The vacuum should start again If the vacuum still does not start contact customer service at 1 800 275 9251 OPERATING INSTRUCTIONS 2 To separate the filter assembly hold the bottom of the debris screen and pull the dust cup cover out Then remove the HEPA filter with the filter ring from the debris screen Fig 13 Filter Assembly Dust Cup_ lt Filter Filter Ring Debris Screen Fig 13 3 Once you have removed the HEPA filter from the debris screen remove the filter ring from around the HEPA filter 4 Vigorously TapClean the HEPA filter on a hard surface until no more dust is observed falling out Fig 14 The HEPA filter may also be washed by running it under the tap allowing the water to run on the dirty side Fig 15 We recommend washing it once a month or when suction appears reduced Always allow 24 hours for air drying before replacing into the vacuum Warning Never over fill the dust cup remove dirt and clean the HEPA dust cup filter filter ring and debris screen each time the dust cup is emptied during prolonged usage or risk motor damage Fig 14 PLEASE NOTE The white pleated filter material in the HEPA Filter will discolor over time This is NORMAL and will NOT affect the performance of the filter If the HEPA filter is properly TapCleaned un after
8. each use Wash and suction once a does not return A or to 100 then Suction we suggest that ee appears the HEPA filter reduced be TapCleaned vigorously until no more dust can be removed then rinsed under the faucet and allowed to air dry for 24 hours before refitting into the vacuum Fig A This should be done once a month or when suction appears to be reduced Note Even though the HEPA filter is washable it should be replaced every 3 to 6 months depending on usage Warning Allow 24 hours for drying before replacing in unit Warning Always empty the dust cup container and clean the HEPA filter filter ring and debris screen before each use and during prolonged usage Never over fill the dust cup container remove dirt and clean the HEPA filter filter ring and debris screen when dirt in dust cup is at or below the MAX level or during prolonged usage because you could risk damaging the motor If you wash the Hepa filter make sure that it has completely air dried for 24 hours before inserting back into the vacuum Please Note The HEPA Filter is washable It should however be replaced every three 3 to six 6 months to ensure peak performance of your vacuum The filter ring and exhaust filter are also rinseable but they should be air dried for 24 hours before replacing into the vacuum They should however be replaced every three 3 months to ensure peak performance of your vacuum
9. g Fig 1 e To remove the handle press the handle release button and pull the handle up Pin Release Button Attaching The Motorized Floor Brush To The Main Unit Insert the motorized floor brush into its location at the bottom of the main unit in the direction of the arrow Fig 2 e Make sure that the motorized floor brush is firmly inserted into the floor brush socket Insert the inlet hose into the floor brush hose connector that is on the floor a Motorized Floor Brush Release Motorized Floor Brush Hose Connector Attaching The Hose To The Main Unit e Hold the end of the removable hose handle and insert it into the hose connector Fig 3 u Motorized Floor Brush Hose Connector Winding amp Unwinding The Power Cord This vacuum cleaner is equipped with a convenient cord storage feature The power cord winds around the two cord holders at the back of the unit The top one has a quick cord release feature Turn the cord hook to the left or the right to remove the power cord Fig 4 When using the vacuum attach the power cord to the cord holder so that the power cord is out of the way when you are vacuuming Fig 5 Fig 5 OPERATING INSTRUCTIONS Cleaning the Filter Ring 1 Around the HEPA filter there is a filter ring This is washable in lukewarm water Fig 16 To remove the filter ring slide it off the HEPA filter 2 We recommend washing t
10. he filter ring when you are washing your HEPA filter Always allow the filter ring to air dry for 24 hours before replacing onto the HEPA filter Never run the vacuum without all the filters in place Changing 8 Cleaning the Exhaust Filter The exhaust filter is a rinseable filter but should be replaced every three 3 months e To remove the exhaust filter covers push the exhaust filter covers up Remove the filter Fig 17 e Rinse the exhaust filters in lukewarm water and air dry the filters completely for 24 hours Do not use a washing machine to rinse the filters Do not use a hair dryer to dry them Air dry only Never operate the vacuum without the exhaust filters in place e When the filters are dry replace into the exhaust filter covers and replace on the vacuum e Severely soiled or clogged filters should be thoroughly rinsed with fresh tepid water A mild detergent can be used if required Motor Thermostat IMPORTANT This unit is equipped with a motor protective thermostat If for some reason the vacuum cleaner should overheat the thermostat will automatically turn the unit off Should this occur Push the On Off button once Disconnect the plug from the power source Check the source of overheating problem i e clogged hose or filter If clogged hose or filter is found unclog the hose and replace the filters Wait at least 45 minutes before attempting to reuse the vacuum After unit h
11. his limited warranty does not cover damage caused by misuse abuse negligent handling or damage due to faulty packaging or mishandling in transit This warranty does not cover damage or defects caused by or resulting from damages from shipping or repairs service or alterations to the product or any of its parts which have been performed by a repair person not authorized by FANTOM This warranty is extended to the original purchaser of the unit and excludes all other legal and or conventional warranties The responsibility of FANTOM if any is limited to the specific obligations expressly assumed by it under the terms of the limited warranty In no event is FANTOM liable for incidental or consequential damages of any nature whatsoever Some states do not permit the exclusion or limitation of incidental or consequential damages so the above may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state Important Carefully pack item to avoid damage in shipping Be sure to include proof of purchase date and to attach tag to item before packing with your name complete address and phone number with a note giving purchase information model number and what you believe is the problem with item We recommend you insure the package as damage in shipping is not covered by your warranty Mark the outside of your package ATTENTION CUSTOMER SERVICE We are constantly striving to i
12. ide the white filter folds many fine dust particles that are difficult to see but which will eventually block or reduce your suction power if not cleaned properly 1 To remove the filter assembly from the dust cup hold the dust cup container in one hand and with the other hand turn counter clockwise and pull out the filter assembly Fig 12 Filter Assembly Dust Cup Container Fig 12
13. ilter Monitor When the Intelli Sense Filter Monitor lights up it means that the dust cup is full or the HEPA filter filter ring and debris screen need cleaning You must empty the dust from the dust cup and clean the HEPA filter filter ring and debris screen right away Emptying the Dust Cup Container Warning Always unplug the unit from electrical outlet before opening the Dust Cup container Important Do NOT use the vacuum without the HEPA filter and filter ring in place To remove the dust cup container press down on the dust cup release and pull the dust cup container out from the vacuum di 10 To empty the dust cup container hold the dust cup from the top over a garbage container and press on the trap door release button that is on the front side of the dust cup container to release the dust cup bottom Fig 11 Fig 11 Cleaning the HEPA Filter Warning After each Use Always remove the Filter Assembly then vigorously TapClean HEPA Filter and clean Debris Screen and Filter Ring until no more dust can be removed IMPORTANT Please Note The TapClean HEPA Filter will stop most of the tiniest dust particles and airborne allergens from re entering the air you breathe In fact it stops 99 97 of all particles as small as 0 3 microns many times smaller than a human hair Because of this incredible filtration performance the HEPA Filter will quickly accumulate ins
14. mprove our products therefore the specifications contained herein are subject to change without notice OWNERSHIP REGISTRATION CARD Please fill out and mail the product registration card within ten 10 days of purchase The registration will enable us to contact you in the unlikely event of a product safety notification By returning this card you acknowledge to have read and understood the instructions for use and warnings set forth in the accompanying instructions RETURN TO EURO PRO Operating LLC 94 Main Mill Street Door 16 Plattsburgh NY 12901 Model FM625H Appliance model Date purchased Name of store Owner s name Address City State Postal code Printed in China 12 IMPORTANT SAFETY INSTRUCTIONS When using electrical appliance basic safety precautions should always be observed to reduce the risk of fire electric shock or injury including the following 1 2 12 13 14 Read all instructions before using your vacuum Use only as described in this manual Use only manufacturer s recommended accessories Use the vacuum only for its intended use To protect against a risk of electric shock do not immerse any part of the system in water or other liquids Never yank cord to disconnect from outlet instead grasp plug and pull to disconnect Do not pull cord use cord as a handle close a door on cord or pull cord around sharp edges or corners Keep cord away from heated surfaces Do not leave the vac
15. t vacuuming make sure to remove large or sharp objects that might damage the debris screen ORDERING REPLACEMENT HEPA DUST CUP FILTERS TO ORDER REPLACEMENT HEPA FILTERS Item XF621H for Model FM625H Call 1 800 275 9251 Monday to Friday 8 30 A M 5 00 P M Eastern Standard Time FOR TECHNICAL SUPPORT for Model FM625H Call 1 800 275 9251 Monday to Friday 8 30 A M 5 00 P M Eastern Standard Time Please Note The HEPA Filter is washable It should however be replaced every three 3 to six 6 months depending on usage to ensure peak performance of your vacuum The exhaust filters and filter ring are rinseable They should however be replaced every three 3 months to ensure peak performance of your vacuum Important Make sure that ALL filters have been completely air dried for 24 hours before re installing back in the vacuum 11 GETTING TO KNOW YOUR BAGLESS STICK VAC TROUBLE SHOOTING GUIDE VACUUM WILL NOT OPERATE VACUUM WILL NOT PICK UP OR SUCTION POWER IS WEAK DUST ESCAPING FROM VACUUM VACUUM HOSE OR BRUSHES WILL NOT PICK UP Power cord not firmly plugged into outlet No power in wall outlet Needs servicing Thermostat has tripped Dust cup is full Unit clogged HEPA Filter needs cleaning or replacing Debris screen needs cleaning Exhaust filters or filter ring needs cleaning Dust cup is full Dust Cup is not installed correctly Hose clogged Dust cup is full
16. uipment grounding conductor can result in a risk of electric shock Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded Do not modify the plug provided with the appliance if it will not fit the outlet have a proper outlet installed by a qualified electrician This appliance is for use on a nominal 120 volt circuit and has a grounding attachment plug that looks like the plug illustrated at right 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Keep hair loose clothing fingers and all parts of body away from opening and moving parts Do not use vacuum to pick up flammable or combustible liquids such as gasoline or use in areas where they may be present Do not pick up anything that is burning or smoking such as cigarettes matches or hot ashes Use extra care when cleaning on stairs Do not use the vacuum without all the filters in place Use only extension cords UL rated or cUL at 15 amperes Extension cords rated for less amperage may overheat Care should be taken to arrange the cord so that the cord cannot be pulled or tripped over Do not put any objects into openings Do not use with any opening blocked Keep free of dust lint hair and anything else that may reduce air flow Store your appliance indoors in a cool dry area Keep your work area well lit Keep end of hose wands and other Openings away from your f
17. uum plugged in when unattended Unplug the electrical cord when not in use and before servicing Turn off all controls as applicable before unplugging from electrical outlet Do not handle plug or hand vacuum with wet hands or operate without shoes Do not allow cord to touch hot surfaces Do not run appliance over cord Do not operate the system with a damaged cord or plug or if the appliance or any other part of the system has been dropped or damaged To avoid the risk of electric shock do not disassemble or attempt to repair the vacuum Return the unit to FANTOM see warranty for examination and repair Incorrect re assembly or repair can cause a risk of electrical shock or injury to persons when the vacuum is used Close supervision is necessary for any appliance being used by or near children Do not leave the system unattended while connected Do not allow to be used as a toy Close attention is necessary when used by or near children pets or plants GROUNDING INSTRUCTIONS This appliance must be grounded If it should malfunction or breakdown grounding provides a path of least resistance for electric current to reduce the risk of electric shock This appliance is equipped with a cord having an equipment grounding conductor and grounding plug The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances WARNING Improper connection of the eq
Download Pdf Manuals
Related Search