Euro-Pro EP602H User's Manual
Contents
1. Please fill out and mail the product registration card within ten 10 days of purchase The registration will enable us to contact you in the unlikely event of a product safety notification By returning this card you acknowledge to have read and understood the instructions for use and warnings set forth in the accompanying instructions RETURN TO EURO PRO Operating LLC 94 Main Mill Street Door 16 Plattsburgh NY 12901 Model EP602H Appliance model Date purchased Name of store Owner s name Address City State Zip code Printed in China Shark Transtormer Vac OWNER S MANUAL Model EP602H 120V 60Hz 10 Amps EURO PRO Operating LLC 94 Main Mill Street Door 16 Plattsburgh NY 12901 Tel 1 800 798 7398 EURO PRO xX IMPORTANT SAFETY INSTRUCTIONS When using your Transformer Vac basic safety precautions should always be observed including the following 1 2 3 eo 10 11 12 13 14 Read all instructions before using your Transformer Vac Use the system only for its intended use To protect against a risk of electric shock do not immerse any part of the system in water or other liquids Never yank cord to disconnect from outlet instead grasp plug and pull to disconnect Do not allow cord to touch hot surfaces Do not run appliance over cord Do not operate the system with a damaged cord or plug or if the appliance or any other part of the system has been dropped o2. from heated surfaces Use only extension cords UL rated or cUL at 15 amperes Extension cords rated for less amperage may overheat Care should be taken to arrange the cord so that the cord cannot be pulled or tripped over Turn off all controls as applicable before unplugging from electrical outlet Do not handle plug or vacuum with wet hands or operate without shoes Do not put any objects into openings Do not use with any opening blocked Keep free of dust lint hair and anything else that may reduce air flow Store your appliance indoors in a cool dry area Keep your work area well lit Keep end of hose wands and other Openings away from your face and body Use only on dry surfaces Using improper voltage may result in damage to the motor and possible injury to the user Correct voltage is listed on rating label SAVE THESE INSTRUCTIONS For Household Use Only WARNING To reduce the risk of electric shock this appliance has a polarized plug one blade is wider than the other This plug will fit in a polarized outlet only one way If the plug does not fit fully in the outlet reverse the plug If it still does not fit contact a qualified electrician to install the proper outlet Do not modify the plug in any way Rev 11 03B ORDERING REPLACEMENT DUST CUP FILTERS TO ORDER REPLACEMENT HEPA FILTERS Item XSH602 for Model EP602H Call 1 800 798 7398 Monday to Friday 8 30 A M 5 00 P M Eastern
3. Standard Time FOR TECHNICAL SUPPORT for Model EP602H Call 1 800 798 7398 Monday to Friday 8 30 A M 5 00 P M Eastern Standard Time Please Note The HEPA Filter is washable It should however be replaced every three 3 to six 6 months to ensure peak performance of your vacuum The Pre Motor the Non Woven Pre Filter and Post Motor Filters are washable They should however be replaced every three 3 months to ensure peak performance of your vacuum Important Make sure that ALL filters have been completely air dried for 24 hours before re installing back in the vacuum 10 GETTING TO KNOW YOUR TRANSFORMER VAC OPERATING INSTRUCTIONS Motor Therm Motor Thermostat If clogged hose or filter is found IMPORTANT This unit is equipped unclog the hose and replace the with a motor protective thermostat If filters l for some reason the vacuum cleaner e Wait at least 45 minutes before should overheat the thermostat will attempting to reuse the vacuum automatically turn the unit off Should e After unit has cooled down for this occur 45 minutes plug in the cleaner e Push the On Off button once and push the On Off button The e Disconnect the plug from the vacuum should start again power source e If the vacuum still does not start e Check the source of overheating contact customer service at problem i e clogged hose or 1 800 798 7398 filter TROUBLE SHOOTING GUIDE 1 Hand Gri
4. container first press on the dust cup release button 1 that is located on the dust cup handle and at the same time press on the dust cup release button 2 that is on the side of the upper housing Fig 8 Then pull the dust cup container out Dust Cup Release Button 1 i my lea a ee ae f ai i an L i f a or Y P Dust Cup Release Button 2 2 To empty the dust 3 The HEPA filter is cup container press on the trap door release button that is on the back side of the dust cup container Fig 9 located underneath the dust cup container Fig 10 Remove the non woven pre filter Fig 11 Remove the HEPA filter hold the edges and pull it out slowly at 4 Non Woven Pre Filter ue g TN Fig 11 HEPA HEPA 7 i SN Filter Filter_ Sask V va E g XQ Fig 10 4 Hold the HEPA filter by the edges and vigorously TapClean the HEPA Filter dirty side down on a hard flat surface until no more dust is observed falling out from between the pleats of the filter Fig 12 We recommend washing the HEPA filter once a month or when suction appears to be reduced Let the HEPA filter air dry completely for 24 hours 5 Rinse the non woven pre filter and let air dry completely 6 Insert the non woven pre filter 7 Reinstall the HEPA filter in the vacuum 8 To separate the debris screen from the dust cup hold the dust cup in one hand and turn t
5. Model EP602H EURO P R OX ONE 1 YEAR LIMITED WARRANTY EURO PRO Operating LLC warrants this product to be free from defects in material and workmanship for a period of one 1 year from the date of the original purchase when utilized for normal household use subject to the following conditions exclusions and exceptions If your appliance fails to operate properly while in use under normal household conditions within the warranty period return the complete appliance and accessories freight prepaid to EURO PRO Operating LLC 94 Main Mill Street Door 16 Plattsburgh NY 12901 If the appliance is found by EURO PRO Operating LLC to be defective in material or workmanship EURO PRO Operating LLC will repair or replace it free of charge Proof of purchase date and 9 95 to cover the cost of return shipping and handling must be included Non durable parts including without limitation filters brushes and electrical parts which normally require replacement are specifically excluded from warranty The liability of EURO PRO O Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option This warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used for commercial purposes This limited warranty does not cover damage caused by misuse abuse negligent handling or damage due to faulty packaging or mishandling in transit This warranty does not cover damag
6. e continuing to use Crevice Tool For radiators crevices corners baseboards and l between cushions J Dusting Brush The dusting brush is used for the furniture venetian blinds books lamp shades and shelves Pet Hair Removal Brush The pet hair removal brush is for use on upholstery drapes and other fabric surfaces to remove lint pet hair etc THE PET HAIR REMOVAL BRUSH IS NOT INTENDED TO BE USED AS A PET GROOMING DEVICE Flexible Hose Telescopic Extension Tube To use with all accessories to reach hard to reach places OPERATING INSTRUCTIONS Intelli Sense Filter Monitor When the Intelli Sense Filter Monitor lights up it means that the dust cup is full or the HEPA filter non woven pre filter or debris screen needs cleaning You must empty the dust from the dust cup and clean the HEPA filter non woven pre filter and debris screen right away Air Driven Turbo Brush Using The Unit With Air Driven Turbo Brush The efficiency of your air driven turbo brush depends on the bristle brush rotating at high speed Strong air suction is needed to accomplish this In order to ensure that maximum air suction is maintained please read the following instructions 1 Empty the dust cup frequently 2 Always shake out the HEPA filter and clean the non woven pre filter and debris screen when emptying the dust cup container 3 Ensure that the rotating brush is kept free of hair and strin
7. e or defects caused by or resulting from damages from shipping or repairs service or alterations to the product or any of its parts which have been performed by a repair person not authorized by EURO PRO Operating LLC This warranty is extended to the original purchaser of the unit and excludes all other legal and or conventional warranties The responsibility of EURO PRO Operating LLC if any is limited to the specific obligations expressly assumed by it under the terms of the limited warranty In no event is EURO PRO Operating LLC liable for incidental or consequential damages of any nature whatsoever Some states do not permit the exclusion or limitation of incidental or consequential damages so the above may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state Important Carefully pack item to avoid damage in shipping Be sure to include proof of purchase date and to attach tag to item before packing with your name complete address and phone number with a note giving purchase information model number and what you believe is the problem with item We recommend you insure the package as damage in shipping is not covered by your warranty Mark the outside of your package ATTENTION CUSTOMER SERVICE We are constantly striving to improve our products therefore the specifications contained herein are subject to change without notice OWNERSHIP REGISTRATION CARD
8. e white pleated filter material in the HEPA Filter will discolor over time This is NORMAL and will NOT affect the performance of the filter If the HEPA Filter is properly TapCleaned PIUSA after each use Wash and suction ences does not return month or to 100 then Hin when AIN suction appears E reduced Warning Allow 24 hours for drying before replacing in unit be TapCleaned no more dust under the faucet and allowed to dry for 24 hours before refitting into the vacuum Fig A This should be done once a month or when suction appears to be reduced CAUTION The suction hole must be open free of any obstructions at all times Otherwise the motor will overheat and could become damaged Warning Always empty the dust cup container and clean the HEPA filter Non Woven Pre Filter and Debris Screen before each use and during prolonged usage Never over fill the dust cup container remove dirt and clean the HEPA filter non woven pre filter and debris screen when dirt in dust cup is at or below the MAX level during prolonged usage or risk motor damage If you wash the Hepa filter or the non woven pre filter make sure that they have completely air dried before inserting back in the vacuum Please Note The HEPA Filter is washable It should however be replaced every three 3 to six 6 months to ensure peak performance of your vacuum The non woven pre filter pre m
9. g which may accumulate and decrease brush performance 4 Keep Air Driven Turbo Brush turbine free of dirt and foreign matter See cleaning instructions Attaching the Air Driven Turbo Brush to the Flexible Hose To use the air driven turbo brush to clean upholstery 1 Remove the flexible hose from the hose connector Fig 6 2 Push the air driven turbo brush onto the end of the flexible hose as far as it will go Important In order to ensure that maximum air suction is maintained empty the dust cup frequently and shake out the HEPA filter non woven pre filter and debris screen at the same time Ensure that the rotating brush is kept free of hair and string which may accumulate and decrease brush performance Attaching the Air Driven Turbo Brush to the Flexible Hose Telescopic Extension Tube To use the air driven turbo brush or other accessory with the flexible hose telescopic extension tube 1 Remove the flexible hose from the hose connector 2 Insert the top end of the telescopic extension tube to the end of the flexible hose 3 Push the air driven turbo brush or other accessory onto the end of the telescopic extension tube as far as it will go Cleaning Air Driven Turbo Brush Locking Latch a oe Tilt or Upwards a an Fig 7 Turbine From time to time the turbine of your turbo brush will require cleaning To do this 1 Remove the turbo brush from the hose or telescopic e
10. he dust cup cover counter clockwise and pull apart To clean the debris screen we recommend that 7 you rinse itunder cS Fig 12 lukewarm running Ve water to remove eee pe the dirt that sa aS accumulates on it but Fig 13 always allow it to completely air dry before inserting back into the vacuum Fig 13 OPERATING INSTRUCTIONS WARNING Always remove the power plug from the wall outlet before assembling or removing accessories lt Hodtheerdorthehose EXTENDING THE TELESCOPIC e Insert the hose into the hose TUBE connector Fig 3 Push the plastic button and pull out the smaller tube See illustration below ATTACHING THE HOSE TO THE MAIN UNIT jet Plastic krak INSERTING THE TELESCOPIC TUBE INTO THE MAIN UNIT e Insert the telescopic tube into the hole next to the dust cup handle Make sure that the slot in the handle fits correctly into the opening Fig 1 e To remove the telescopic tube press the telescopic tube release button and pull the tube up WINDING amp UNWINDING THE POWER CORD This vacuum cleaner is equipped with a convenient cord storage feature The N power cord winds around 4 the two cord holders at the back of the unit The bottom one has a quick cord release feature Turn the cord hook to the left or the right to remove the power cord ATTACHING THE FLOOR BRUSH TO THE MAIN UNIT im Fig 4 oF e Insert the floor brush d
11. i ON OFF SWITCH Fig 4 D A a P e The On Off switch has two different the direction of the arrow Fig 2 positions To ee e Push on the I side to turn the vacuum ON floor brush from the a main unit press on the floor brush release button ja and pull iii the floor brush out Push on the O side to turn the vacuum OFF OPERATING INSTRUCTIONS USING THE UNIT AS AN UPRIGHT e Unwind the power cord i and plug into the d 120V outlet pi e Push down on the H locking button to adjust the height of the oN telescopic handle J K NOTE When vacuuming deep pile carpets or hard to vacuum carpets lower the angle of the telescopic handle see illustration at right for easier maneuverability USING THE UNIT AS A HAND VACUUM e Press the telescopic tube release button to remove the telescopic tube See Fig 1 page 4 Press the floor brush release button to remove the floor brush See Fig 2 page 4 e Attach the shoulder strap to the shoulder strap attachment point See illustration below e Attach the crevice tool or the dusting brush to the end of the hose After extended use the body of the vacuum cleaner may become hot When using the unit with the shoulder strap the unit will touch the body of the user Therefore make sure that the unit body is cool before you use with the shoulder strap If during use the vacuum gets too warm allow it to cool befor
12. iew Dust Cup instructions Extension Tube 22 Air Driven Turbo Brush 5 r Eeh 23 Pet Hair Removal Brush emove hose and or brushes VACUUM HOSE Hose clogged Remove obstruction from hose 24 Shoulder Strap not shown OR BRUSHES WILL NOT PICK UP Dust cup is full and or brush Empty and clean dust cup Technical Specifications Voltage 120V 60HZ Power 10 Amps Illustration may differ from actual product 2 PRECAUTIONARY MEASURES IMPORTANT If the suction opening in the unit or the hose is BLOCKED switch off the vacuum cleaner and remove the blocking substance before you start the unit again 1 Do not operate the vacuum cleaner too close to heaters radiators or cigarette butts 2 Before inserting the power plug into the wall outlet make sure that your hands are dry Voth i Lect ii w p e A il lt p tifi 3 Before you start vacuuming make sure to remove large or sharp objects that might damage the dust cup debris screen 4 When pulling out the power plug from the wall outlet pull the plug not the power cord _ a P r _ q r 4 mS az ie Dee i Pe a i rF 5 Na Tre 1 gt ey d 5 Do not pick up anything that is burning or smoking such as cigarettes matches or hot ashes Do not use without ALL filters in place we suggest that the HEPA filter vigorously until can be removed then rinsed PLEASE NOTE Th
13. otor and post motor filters are washable They should however be replaced every three 3 months to ensure peak performance of your vacuum Important make sure that all filters have completely air dried before re installing back in the vacuum OPERATING INSTRUCTIONS Changing amp Cleaning the Pre Motor Filter The pre motor filter is a washable filter but should be replaced every three 3 months e Remove the dust cup container the Non Woven Pre Filter and the HEPA filter to remove the pre motor filter Fig 14 e Rinse the pre motor filter in lukewarm water and air dry the filter completely for 24 hours Do not use a washing machine to rinse the filter Do not use a hair dryer to dry it Air dry only Never operate the vacuum without the pre motor filter in place e When the filter is dry replace into the unit and replace the HEPA filter and dust cup container A severely soiled or clogged filter should be thoroughly washed with fresh tepid water A mild HeD Jan can be used if required Fig 14 Changing amp Cleaning the Post Motor Filter The post motor filter is a washable filter but should be replaced every three 3 months e Remove the filter cover from the front of the unit and remove the filter Fig 15 Rinse the post motor filter in lukewarm water and air dry the filter completely for 24 hours Do not use a washing machine to rinse the filter Do not use a hair dryer
14. p 5i Pr 2 Telescopic Tube ug unit in firmly l Power cord not firmly plugged into Check fuse or breaker Replace 3 Locking Button VACUUM WILL outlet fuse reset breaker 4 Flexible Hose NOT OPERATE No power in wall outlet Call 1 800 798 7398 5 Dust Cup Release Button 1 Needs servicing Turn the unit off and unplug from 6 Dust Cup Handle Thermostat has tripped outlet Allow unit to cool down l f then restart T Dust Cup Container 8 Main Unit TM Empty and clean dust cup 9 Intelli Sense Filter Dust cup is full Turn unit off and unplug from Monitor NOT PICK UP OR HEPA fier needs cleani E ee ee eee Ove ilter needs cleaning or ilter and check for object s in SUCTION POWER replacing air duct and remove 11 On Off Switch IS WEAK Debris screen needs cleaning Clean or replace HEPA Filter 12 Power Cord Filters need cleaning Clean debris screen 13 Floor Brush Release Button eee 14 Floor Brush 15 Crevice Tool Dust cup is full Empty dust cup 16 Dusti B h TURBO BRUSH Rotating brush or elbow is OE R Vusting Brus DOES NOT obstructed 17 Telescopic Tube Release l Call 1 800 798 7398 ROTATE OR Belt is broken Button ROTATES Hose obstructed E A 18 Dust Cup Rel Button 2 SLOWLY Debris screen is clogged E N l Vust UUp Release Dutton Filters need cleaning l 19 Cord Hook Release 20 Hose Connector DUST ESCAPING Dust cup is full Empty and clean dust cup 21 Telescopic Hose FROM VACUUM Dust Cup is not installed correctly Rev
15. r damaged To avoid the risk of electric shock do not disassemble or attempt to repair the Transformer Vac Return the system to EURO PRO Operating LLC see warranty for examination and repair Incorrect re assembly or repair can cause a risk of electrical shock or injury to persons when the Transformer Vac is used Close supervision is necessary for any appliance being used by or near children Do not leave the system unattended while connected Keep hair loose clothing fingers and all parts of body away from opening and moving parts Do not use to pick up flammable or combustible liquids such as gasoline or use in areas where they may be present Do not pick up anything that is burning or smoking such as cigarettes matches or hot ashes Use extra care when cleaning on stairs Do not use the vacuum without ALL the filters in place This appliance is intended only for household use Follow all user instructions in this manual To reduce the risk of fire electric shock or injury Do not leave the Transformer Vac plugged in when unattended Unplug the electrical cord when not in use and before servicing Do not allow to be used as a toy Close attention is necessary when used by or near children pets or plants Use only as described in this manual Use only manufacturer s recommended accessories Do not pull cord use cord as a handle close a door on cord or pull cord around sharp edges or corners Keep cord away
16. to dry it Air dry only Never operate the vacuum without the post motor filter in place When the filter oe is dry replace Filter into the filter cover and replace the filter cover to the unit A severely Fig 15 soiled or h amp clogged filter should be thoroughly washed with fresh tepid water A mild detergent can be used if required OPERATING INSTRUCTIONS Emptying the Dust Cup Container and Cleaning Changing the Non Woven Pre Filter HEPA Filter amp Debris Screen Warning Always unplug the unit from electrical outlet before opening the Dust Cup container Important Do NOT use the vacuum without the HEPA filter in place Warning After each Use Always remove filter assembly and the dust cup cover with the debris screen then vigorously TapClean HEPA filter and clean debris screen and non woven pre filter until no more dust can be removed IMPORTANT Please Note The TapClean HEPA Filter will stop most of the tiniest dust particles from re entering the air you breathe In fact it stops 99 97 of all particles as small as 0 3 microns many times smaller than a human hair Because of this incredible filtration performance the HEPA Filter will quickly accumulate inside the white filter folds many fine dust particles that are difficult to see but which will eventually block or reduce your suction power if not cleaned properly 1 To remove the dust cup
17. xtension tube 2 Slide locking latch forward then tilt the top housing of the brush upwards The top housing is hinged and will tilt up approximately 45 only Fig 7 3 There may be some dust lint hair etc on the turbine wheel Remove as much of this as possible 4 You may also use the unit s hose with crevice tool attached and use the vacuum to remove any additional debris from the turbine 5 Ensure that the turbine wheel moves freely by rotating it with your finger If the turbine does not rotate call Customer Service for help 6 Once clean close the top cover of the turbo brush and slide the locking latch toward the rear of the brush to lock 6
Download Pdf Manuals
Related Search