Emerson FTA200 Brochures and Data Sheets
Contents
1. Alarm Panels Firetrol EMERSON Network Power FTA200 Alarm Panels Firetrol FTA200 alarm panels are designed to meet the NFPA 20 specifications requiring a remote alarm panel when the pump house or pump room is not constantly attended The alarm panel must be installed in a location that is under supervision at all times Approvals Firetrol alarm panels are listed by Underwrit ers Laboratories Inc in accordance with UL508 Standard for Industrial Controls certified by CSA Standard for Industrial Control Equipment cUL and approved by Factory Mutual They are designed to meet or exceed the ANZI ofthe approving authorities listed above as well as NFPA 20 Installation of Centrifugal Fire Pumps Enclosures The standard enclosures are NEMA Lo 2 IEC IP11 drip proof for indoor wall mounting The standard enclosure color is red Standard Features The following are included as stan dard as shown with each alarm panel tvpe IvpeA ae jieu for use with electric motor driven fire pump controllers thev provide indication for the follow ing conditions e Supervisory Voltage Normal Audible amp Visible e Pump Operating Audible amp Visible e Pump Phase Failure Audible amp Visible e Pump Phase Reversal Audible amp Visible Type F Designed for use with diesel engine driven fire pump controllers they provide indication for the follow ing conditions e Supervisory Voltage Normal Visible Onl2. oad Suite 120 Cary NC 27518 Tel 1 919 460 5200 9 Fax 1 919 460 5250 EmersonNetworkPower com Firetrol com While every precaution has been taken to ensure accuracy and completeness herein ASCO assumes no responsibility and disclaims all liability for damages resulting from use of this information or for any errors or omissions Information and specifications are subject to change without notice Emerson Consider It Solved Emerson Network Power the Emerson Network Power Logo ASCO Firetrol and the Firetrol Logo are trademarks or registered trademarks of Emerson Electric Co All other names and logos referred to are trade names trademarks or registered trademarks of their respective owners 2013 Emerson Electric Co CB200 50 A EMERSON CONSIDER IT SOLVED
3. y e Engine Trouble Audible amp Visible e Engine Running Audible amp Visible e Main Switch Mis Set Audible amp Visible FTA200 alarm panels make use of printed circuit boards which provide reliable and trouble free service Mounted on the enclosure door are the pilot lights ee for visible alarm indication the audible device for audible alarm indication the SILENCE ALARM push button and the PUSH TO TEST push button Each pilot light will illuminate to indicate its alarm condition and will remain lighted until the abnormal con dition has been corrected The audible alarm will sound when the alarm conditions occur and will continue to sound until the abnormal condition has been corrected or the SILENCE ALARM push button has been pressed Pressing the SILENCE ALARM push button will silence the audible alarm but will not extinguish the pilot light If an other alarm condition occurs the audible alarm will again sound until silenced by the SILENCE ALARM push button or until the abnormal condition has been corrected The PUSH TO TEST push button is supplied for manually testing the pilot lights audible alarm and output circuits Options and Modifications Refer to the Product Description sheet for a complete listing of Options and Modifications Emerson Network Power Global Headquarters 1050 Dearborn Drive Columbus OH 43085 Tel 1 614 888 0246 ASCO Power Technologies Firetrol Brand Products 111 Corning R
Download Pdf Manuals
Related Search