Home

Emerson Avocent Universal Management Gateway Quick Installation Guide

1. Class A limits for radio noise emission from digital apparatus set out in the Radio Interference Regulation of the Canadian Department of Communications N EMERSON Network Power Fiber Media Converter specifications AC wall adaptor 100 to 240 10 V AC input 5V DC output 2A max Power consumption typical 600 mA 5V Operating temperature 32 to 122 F 0 to 50 C Storage temperature 4 to 158 F 20 to 70 C Humidity 5 to 90 non condensing O to 10 000 ft altitude Dimensions 0 83 H x 1 80 W x 3 35 D 2 1cm x 4 6cm x 8 5cm PowerTray specifications Power consumption typical AC Input Load 100 to 240 10 VAC 50 60Hz 1 5 to 0 75A Operating temperature 4 F to 158 F 20 C to 70 C Storage temperature 40 F to 185 F 40 C to 85 C Humidity 5 to 95 non condensing 0 to 10 000 ft altitude Dimensions 2 30 H x 16 97W x 9 25 D 5 80 x 43 10 x 23 5 cm 090 658 01A Emerson Emerson Network Power and the Emerson Network Power logo are trademarks or registered trademarks of Emerson Electric Co Avocent and the Avocent logo are trademarks or registered trademarks of Avocent X To Contact Avocent Technical Support Visit www avocent com Corporation or its affiliates in the U S and other countries All other marks are the property of their respective owners This document may contain confidential and or proprietary information of Avocent Corpora
2. AVOCENT FIBER MEDIA CONVERTER Quick Installation Guide For document downloads visit www avocent com manuals The following instructions will help you install your Avocent Fiber Media Converter Should you require further assistance please contact Avocent Technical Support The Avocent Fiber Media Converter converts 1000BaseSX multi mode or LX single mode fiber to 1000BaseT copper The Plug and Play Fiber Media Converter automatically selects between a crossover workstation and a straight through connection depending on the connected device for the twisted pair port The Fiber Media Converter can be installed in an IE PowerTray or can be used as a standalone media converter with a universal external switching power Cube Installing the IE PowerTray Mount the Powerlray into your rack using the brackets on either side of the Powerlray Installing a Fiber Media Converter into the PowerTray Make sure the Fiber Media Converter s data connectors are facing the front of the Powerlray then use the guides to slide it into the PowerTray until it is seated firmly in the backplane Connecting devices Plug one end of a CAT 5 network cable into the twisted pair port of the Fiber Media Converter then plug the other end into a device Plug the PowerlTray into a power source and turn the power on A green LED on the back of the PowerlTray will illuminate when the power is turned on Fiber Media Con
3. e handling any module or component If the wrist strap is not available maintain grounded contact with the unit throughout any procedure requiring ESD protection e After removal always place the boards on a grounded static free surface ESP pad or in a proper ESD bag Do not slide the modules or stand alone units over any surface WARNING ntegrated circuits and fiber optic components are extremely susceptible to electrostatic discharge damage Do not handle these components directly unless you are a qualified service technicican and use tools and techniques that conform to accepted industry practices FCC radio frequency interference statement This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his her own expense The use of non shielded I O cables may not guarantee compliance with FCC RFI limits This digital apparatus does not exceed the
4. tion and its receipt ME o possession does not convey any right to reproduce disclose its contents or to manufacture or sell anything that it may describe Reproduction disclosure or use without specific authorization from Avocent Corporation is strictly prohibited 2012 Avocent Corporation All rights reserved
5. ufacture or sell anything that it may describe Reproduction disclosure or use without specific authorization from Avocent Corporation is strictly prohibited 2012 Avocent Corporation All rights reserved AVOCENT FIBER MEDIA CONVERTER E Quick Installation Guide Fiber optic cleaning guidelines Fiber Optic transmitters and receivers are extremely susceptible to contamination by particles of dirt or dust which can obstruct the optic path and cause performance degradation For optimal system performance ensure the following e Use fiber patch cords or connectors if you terminate your own fiber only from a reputable supplier Low quality components can cause many problems in installation e Dust caps are installed to ensure factory clean optical devices These protective caps should be installed when the fiber media converter is disconnected e Store spare caps in a dust free environment such as a sealed plastic bag so that when reinstalled they do not introduce any contamination to the optics e If the optics have been contaminated use compressed air and methanol to clean them Electrostatic discharge precautions Electrostatic discharge ESD can cause damage to any product containing electronic components Always observe the following precautions when installing or handling Do not remove the unit from its protective packaging until it is ready for installation e Wear an ESD grounding wrist strap befor
6. verter AN 9 EMERSON Network Power EMERSON Hrbek Prrevor Acemi ihe kisi Conenrber EMERSON Mie bach Prena Aegnat Fiber kindly Gorenrber End view of fiber media converter NOTE n a standalone configuration the unit can be powered by either its power supply or with a USB cable connected to a computer or HMX user station Both the power cord and USB cable are included with the unit LED operation The Fiber Media Converter has two LEDs The FX LNK LED illuminates green when a link is established on the fiber port and blinks green when data is passing The TX LNK ACT LED illuminates amber when a link is established on the copper port It blinks amber when activity is detected on the copper port For additional information Visit www avocent com for more information on your Fiber Media Converter gt To Contact Avocent Technical Support Visit www avocent com Emerson Emerson Network Power and the Emerson Network Power logo are trademarks or registered trademarks of Emerson Electric Co Avocent and the Avocent logo are trademarks or registered trademarks of Avocent 090 658 01A Corporation or its affiliates in the U S and other countries All other marks are the property of their respective owners This document may contain confidential and or proprietary information of Avocent Corporation and its receipt or possession does not convey any right to reproduce disclose its contents or to man

Emerson Avocent Universal Management Gateway Quick Installation Guide

Contents

Download Pdf Manuals

Related Search

Related Contents