Electrolux ZDF 501 User's Manual
Contents
1. Inlet hose Connect the inlet hose to a water tap with an external thread of 3 4 The inlet hose can be turned either to the left or the right to suit the installation by means of the locknut The locknut must be correctly fitted to avoid water leaks 24 Drain hose Connect drain hose to the sink Secure it with the supplied hose clamp Required height 30 to 100 cm above bottom of the dishwasher If you use a drain hose extension the total length should not be longer than 4 metres Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided ZANUSSI Electrolux N CAUTION Always be sure that there is no water leakage from hoses and their connections after the installation Ensure that the hoses are not kinked crushed or entangled Electrical connection Z WARNING Safety standards require the appliance to be earthed The manufacturer accepts no liability for failure to observe the above safety precautions Prior to using the appliance for the first time ensure that the rated voltage and type of supply on the rating plate match that of the supply where the appliance is to be installed The fuse rating is also to be found on the rating plate Always plug the mains plug into a correctly installed shockproof socket WARNING Multi way plugs connectors and extensi2. a b r Rinse aid ey illuminates when rinse aid needs to be filled N L refilling light 9 Programme table Programme Cycle description Intensive gS Heavy soil Prewash Main wash 70 gt Crockery cutlery pots and pans 2 intermediate rinses Final rinse Dry Auto Normal Light soil Prewash Main wash 65 50 Crockery and cutlery 1 or 2 intermediate rinses Final rinse Dry 30 min mA Light soil Main wash Final rinse as Crockery and cutlery Eco Normal soil Prewash Main wash 50 Crockery and cutlery 1 intermediate rinse Final rinse Dry Rinse and RD Any Prewash SS Hold Partial load to be completed later in the day This programme does not require the use of detergent AUTO washing programme During the AUTO washing programme the amount of soil on the dishes is determined by how cloudy the water is If the appliance is partially loaded and the dishes lightly soiled the prewash main wash and rinse phases of the programme are shorter and the water consumption level is lower If the appliance is fully loaded and the dishes heavily soiled the prewash main wash and rinse phases of the programme are longer and the water consumption level is higher For this reason the programme duration water and energy consumption levels can vary within the stated range for AUTO programme see Washing programmes chart During the AUTO pro
3. ZANUSSI Electrolux Filling with rinse aid g IMPORTANT Top up the rinse aid when the light on the control panel illuminates Open the lid Fill up with rinse aid Clean up any rinse aid The maximum level for which overflows Close filling is indicated by the lid and press until it max locks Z CAUTION Never fill the rinse aid dispenser with any other substances e g dishwasher cleaning agent liquid detergent This would damage the appliance Adjusting the dosage of rinse aid Increase the dose if there are drops of water or Reduce the dose if there are whitish streaks lime spots on the dishes after washing on the dishes or a bluish film on glassware or knife blades ee Open the lid Set the dosage level Close the lid and press The dose is factory set until it locks in position 4 13 Loading cutlery and dishes The following items are not suitable for use When loading the dishwasher make sure in the dishwasher that you Cutlery with wooden horn china or Remove all left over food and debris mother of pearl handles Soften remnants of burnt food in pans Plastic items that are not heat resistant Load hollow items such as cups glasses Older cutlery with glued parts that are not pans etc with the opening downwards so temperature resistant that water cannot collect in the container
4. Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside the United Kingdom Appliances found to be in use within a commercial environment plus those which are subject to rental agreements e Products of Zanussi Electrolux manufacture which are not marketed by Zanussi Electrolux ZANUSSI Electrolux European guarantee This appliance is guaranteed by Electrolux in each of the countries listed in the following page for the period specified in the appliance guarantee or otherwise by law If you move from one of these countries to another of these countries the appliance guarantee will move with you subject to the following qualifications The appliance guarantee starts from the date you first purchased the appliance which will be evidenced by production of a valid purchase document issued by seller of the appliance The appliance guarantee is for the same period and to the same extent for labour and parts as exists in your country of residence for this particular model or range of appliances The appliance guarantee is personal to the original purchaser of the appliance and cannot be transferred to another user The appliance is installed and used in accordance with instructions issued by Electrolux and is only used within the home i e is not used for commercial purposes The appliance is installed in accordance with all relevant regulations i
5. Press and hold simultaneously function buttons 2 and 3 until the lights of function buttons 1 2 and 3 start flashing The dishwasher must be switched off Switch on the dishwasher by pressing the On Off button Release the buttons and then press function button 1 the lights of function buttons 2 and 3 turn off while function button 1 goes on flashing The digital display indicates the current level 1 g adro 70 65 50 30min a To change the level press function button 1 Each time the button is pressed the level increases For the selection of the new level see the chart The digital display indicates the new level set Level 1 follows level 10 To memorise the operation switch off the dishwasher by pressing the On Off button 11 Filling with dishwasher salt CAUTION Use only special salt suitable for dishwashers cs SS J Unscrew the cap Only before filling with Using the funnel salt for the first time provided pour in the fill the salt container salt until the container is with water filled with salt IMPORTANT Water will overflow from the container as salt is added IMPORTANT Immediately start a complete programme Remove any trace of Replace the cap tightly salt turning it clockwise until it stops with a click IMPORTANT Top up the special salt when the light on the control panel illuminates 12
6. perfectly under the two guides D IMPORTANT NEVER try to remove the spray arms If residues of soil have clogged the holes in the upper spray arm remove them with a toothpick 18 External cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth If necessary use only neutral detergents Never use abrasive products scouring pads or solvent acetone trichloroethylene etc Ensure that the seals around the door the detergent and rinse aid dispensers are cleaned regularly with a damp cloth We recommend every 3 months to run a 65 C wash programme without dishes using detergent Prolonged periods of non operation If you are not using the machine for any period of time you are advised to 1 Unplug the appliance and then turn off the water 2 Leave the door ajar to prevent the formation of any unpleasant smells 3 Leave the inside of the machine clean Environmental concerns Packaging material The packaging materials are environmentally friendly and can be recycled The plastic components are identified by markings e g gt PE lt gt PS lt etc Please dispose of the packaging materials in the appropriate container at the community waste disposal facilities Z WARNING When a unit is no longer being used Pull the plug out of the socket Cut off the cable and plug and dispose of them Dispose of the door catch This prevents children from trapping
7. themselves inside and endangering their lives ZANUSSI Electrolux Frost precautions Avoid placing the machine in a location where the temperature is below 0 C If this is unavoidable empty the machine close the appliance door disconnect the water inlet pipe and empty it Moving the machine If you have to move the machine moving house etc 1 Unplug it 2 Turn the water tap off 3 Remove the water inlet and discharge hoses 4 Pull the machine out together with the hoses 5 Only transport the dishwasher in an upright position otherwise salt water may run out Old appliance The symbol on the product or on its packaging indicates that this product may not be treated as household waste Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product For more detailed information about recycling of this product please contact your local city office your household waste disposal service or the shop where you purchased the product Something not working IMPORTANT The dishwasher will not start or stops during operation Certain problems are due to the lack of simple maintenance or oversights which can be sol
8. LV 1012 Riga Verkiu 29 09108 Vilnius Lithuania Rue de Bitbourg 7 L 1273 Hamm H 1142 Budapest XIV Erzs bet kir lyn tja 87 Vennootsweg 1 2404 CG Alphen aan den Rijn Rislakkvn 2 0508 Oslo Herziggasse 9 1230 Wien ul Kolejowa 5 7 Warsaw Quinta da Fonte Edificio Gongalves Zarco Q 35 2774 518 Paco de Arcos B dul Timisoara 90 S6 Bucharest Industriestrasse 10 CH 5506 Magenwil Tr a ka 132 1000 Ljubljana Electrolux Slovakia s r o Electrolux Domace spotrebi e SK Seber niho 1 821 03 Bratislava Konepajanranta 4 28100 Pori Electrolux Service S t Gdransgatan 143 S 105 45 Stockholm Tarlaba caddesi no 35 Taksim Istanbul 129090 MocksBa OnumnuitcKui npocnekt 16 BL Onumnuk ZANUSSI Electrolux www electrolux com www zanussi electrolux co uk 156999 58 0 Subject to change without notice ZANUSSI E Electrolux lt
9. given in specific paragraphs ZANUSSI Electrolux Control panel and functions Programme in progress light Digital display On Off button IMPORTANT Always remember that when operations such as selecting a washing programme setting the water softener Function and programme selection buttons Delay start button Salt and rinse aid lights Press On Off button ONLY a programme button light is illuminated last performed performing programme still set In this case the programme has to be cancelled see instructions Cancel a washing programme in progress the appliance MUST be in setting mode Press On Off button ALL programme selection button lights are illuminated appliance in setting mode can also be set with the help of these a buttons O mo kh co p E C Function buttons the setting of the water softener e the cancelling of a programme in progress ra In addition to the dishwashing programme selection the following functions Cin the digital display is indicated the level of hardness to which the water softener is set ti Digital display the approximate remaining time of the running programme Se the end of the programme a zero is visible the countdown of the delay start fault codes concerning malfunction of the applian
10. Bonded cutlery items or dishes or a deep base Dishes and items of cutlery must not lie inside one another or cover each other To avoid damage to glasses they must Pewter or copper items Lead crystal glass Steel items prone to rusting not touch Wooden platters Lay small objects in the cutlery basket Items made from synthetic fibres e Plastic items and pans with teflon have a tendency to retain water drops these items will not dry as well as porcelain and steel items IMPORTANT Before closing the door ensure that the spray arms can rotate freely Load cutlery Place knives and other For best results we items of cutlery with recommend you to use sharp points or edges the cutlery grid provided with their handles facing if the size and upwards dimensions of the Risk of injury cutlery allow it 14 Place knives and other items of cutlery with sharp points or edges with their handles facing upwards Risk of injury Load cutlery For best results we recommend you to use the cutlery grid provided if the size and dimensions of the cutlery allow it Load the lower basket Arrange serving dishes and large lids around the edge of the basket ZANUSSI Electrolux The two rows of prongs on the lower basket can be easily lowered to allow you to load pots pans and bowls Load upper ba
11. For the address of your local Service Force Centre and further information about Service Force please visit the website at www serviceforce co uk Before calling out an engineer please ensure you read the details under the heading Something not working When you contact the Service Force Centre you will need to give the following details 1 Your name address and post code 2 Your telephone number 3 Clear and concise details of the fault 4 The model and serial number of the appliance found on the rating plate 5 The purchase date Please note that a valid purchase receipt or guarantee documentation is required for in guarantee service calls For Customer Service in The Republic of Ireland please contact us at the address below Electrolux Group Irl Ltd Long Mile Road Dublin 12 Republic of Ireland Tel 353 0 1 4090751 Email service eid electrolux ie ZANUSSI Electrolux SERVICESFORCHE Customer Care Department For general enquiries concerning your Zanussi Electrolux appliance or for further information on Zanussi Electrolux products please contact our Customer Care Department by letter or telephone at the address below or visit our website at www zanussi electrolux co uk Customer Care Department Major Appliances Zanussi Electrolux Addington Way Luton Bedfordshire LU4 9QQ Tel 08705 727727 calls to this number may be recorded for training purposes To buy accessories
12. ZANUSSI E Electrolux a User manual Ne tt Dishwasher L p L y p 7 ZDF 501 Ne Content Safety information 3 Control panel and functions 5 Programme table 8 Before the first use 9 Setting the water softener 9 Filling with dishwasher salt 12 Filling with rinse aid 13 Adjusting the dosage of rinse aid 13 Loading cutlery and dishes 14 Filling with detergent 17 Unloading the dishwasher 17 Cleaning and care 18 Environmental concerns 19 Something not working 20 Technical data 22 Consumption values 22 Hints for test institutes 23 Installation 24 Service and spare parts 27 Guarantee conditions 28 European guarantee 29 Safety information ZANUSSI Electrolux In the interest of your safety and to ensure the correct use before installing and first using the appliance read this user manual carefully including its hints and warnings To avoid unnecessary mistakes and accidents it is imp
13. advise that you Fill up the salt and rinse aid container Adjust the water hardness setting to the highest level and perform 1 normal washing programme without loading any dishes Adjust the water hardness setting according to the hardness of the water in your area Adjust the rinse aid dosage IMPORTANT The water softener must be set in both ways manually and electronically Level indicated on the digital display Water hardness Adjustment of the water hardness setting manually electronically Clarke in mmol l 64 88 91 125 9 0 12 5 iOL 2 level 10 53 63 76 90 7 6 8 9 gp 2 level 9 46 52 65 75 6 5 7 5 Gi 2 level 8 36 45 51 64 5 1 6 4 aye 2 level 7 28 35 40 50 4 0 5 0 6L 2 level 6 23 27 33 39 33 39 SL 2 level 5 Sin 18 22 26 32 2 6 3 2 4i 1 level 4 13 17 19 25 1 9 2 5 JL 1 level 3 5 12 eats 0 7 1 8 eL 1 level 2 lt 5 lt 7 lt 0 7 iL 1 level 1 no salt necessary 1 Clarke degree measure of the water hardness 2 TH French degree measure of the water hardness 3 mmol l millimol per litre international unit for water hardness Setting the water softener manually see table The water softener is factory set at position 2 Set switch to position 1 or 2 ZANUSSI Electrolux Setting the water softener electronically see table The water softener is factory set at position 5 123 0 nho af a 70 65050 30min
14. al Service Force Centre Close the door Insert the mains plug Replace the fuse If dishes are to be washed immediately cancel the delay start Once these checks have been carried out close the dishwasher s door and switch on the appliance Press the button of the programme that was running before the intervention of the alarm The programme will continue from the point at which it was interrupted If the malfunction or fault code reappears contact the Service Force Centre For other fault codes not described in the above chart please contact your Service Force Centre 20 ZANUSSI Electrolux The wash results are not satisfactory The wrong washing programme has been selected The dishes were arranged in such a way as to stop water reaching all parts of the surface The baskets must not be overloaded The spray arm do not rotate freely due to incorrect arrangement of the load The filters in the base of the washing compartment are dirty or incorrectly positioned Too little or no detergent has been used Where there are limescale deposits on the dishes the salt container is empty or the incorrect level of the water softener has been set The drain hose connection is not correct The salt container cap is not properly closed The dishes are not clean The dishes are wet and Rinse aid was not used dull The rinse aid dispenser is empty There are streaks milky e Decrease rinse aid dosi
15. ce IMPORTANT Select the washing programme and the delay start with the door slightly opened The start of the programme or the countdown of the delay start will occur only after the closure of the door Until that moment it is possible to modify the set made e Starting the washing programme 1 Press the On Off button 2 Press the button corresponding to the required programme the corresponding light remains illuminated while the other programme lights turn off In the digital display will appear flashing the running time of the programme in minutes 3 The programme in progress light illuminates 4 Close the dishwasher s door the programme will start automatically In the digital display the running time of the programme is no longer flashing and the programme in progress light remains illuminated Programme selection lt Once the programme has started if you want to change the selection made you must cancel the washing programme in progress e Cancel the washing programme in progress 1 Press and hold simultaneously function buttons 2 and 3 until ALL programme button lights will illuminate 2 Release function buttons 2 and 3 3 Switch off the machine by pressing the On Off button or select a new washing programme check that there is detergent in the detergent dispenser ZANUSSI 4 Electrolux This option allows the start of the programme to be delayed from 1 to 19 hours After having sel
16. consumables and spare parts at our online shop please visit http www zanussi electrolux co uk 27 Guarantee conditions Standard Guarantee Conditions We Zanussi Electrolux undertake that if within 12 months of the date of purchase this ZANUSSI ELECTROLUX appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials we will at our option repair or replace the same FREE OF CHARGE for labour materials or carriage on condition that The appliance has been correctly installed and used only on the electricity supply stated on the rating plate The appliance has been used for normal domestic purposes only and in accordance with the manufacturer s instructions The appliance has not been serviced maintained repaired taken apart or tampered with by any person not authorised by us All service work under this guarantee must be undertaken by a Service Force Centre Any appliance or defective part replaced shall become the Company s property This guarantee is in addition to your statutory and other legal rights Home visits are made between 8 30am and 5 30pm Monday to Friday Visits may be available outside these hours in which case a premium will be charged 28 Exclusions This guarantee does not cover e Damage or calls resulting from transportation improper use or neglect the replacement of any light bulbs or removable parts of glass or plastic
17. ected the washing programme press the delay start button until the flashing number of the hours for the delay start will appear in the digital display Close the dishwasher s door the countdown starts automatically Once the countdown has elapsed the washing programme will start automatically Delay start an e Cancel the delay start in progress button To cancel a delay start in progress you have to reset the dishwasher a follow the same instructions given in Cancel the washing programme in progress IMPORTANT Cancelling a delay start involves also the cancelling of the washing programme set In this case you have to select the washing programme again C J IMPORTANT The selection of the washing programme and delay start can occur also with the door closed Keep in mind that in this way once a washing programame button is pressed you have ONLY 3 seconds in which you can choose another programme or select a delay start after which the selected programme will start automatically N Programme in llluminates when the washing programme has been set progress light When the delay start has been set this light turns off and will come on again once the countdown has elapsed and the washing programme has started a g i gt Salt refilling llluminates when special salt needs to be filled light i _ It can remain illuminated several hours after the salt has been filled
18. gramme the temperature of the main wash water is also automatically adjusted between 50 C and 65 C depending on the amount of soil on the dishes 8 Before the first use When using separate special dishwasher salt rinse aid and detergent set the water softener add special dishwasher salt fill up with rinse aid When using tablets that integrate rinse aid and detergent there is no need to fill up with rinse aid set the water softener add special dishwasher salt Setting the water softener The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply which would have a detrimental or adverse effect on the operation of the appliance The softener should be adjusted according to the hardness of the water in your area Your local Water Authority can advise you on the hardness of the water in your area ZANUSSI Electrolux When using tablets that integrate rinse aid detergent salt function and other additives there is no need to fill up with special salt or rinse aid Check whether these detergents are suitable for your water hardness Follow the manufacturers instructions Set the water hardness to level 1 IMPORTANT If the drying results are not satisfactory we recommend that you 1 Fill up the rinse aid dispenser with rinse aid 2 Set the rinse aid dosage to position 2 If you decide in future to use separated detergents we
19. ital display when the washing programme is selected 22 B ZANUSSI E Electrolux Hints for test institutes Testing in accordance with EN 60704 must be Test in accordance with EN 50242 must be carried out with appliance fully loaded and carried out when the salt container and rinse using the test programme see Consumption aid dispenser have been filled with salt and values rinse aid respectively and using the test programme see Consumption values Full load 12 standard place settings Amount of detergent required 5 g 25 g Type B Rinse aid setting position 4 Type III na al 111 0 Lower basket Upper basket Cup racks position A 23 Installation Z WARNING Any electrical and or plumbing work required to install this appliance should be carried out by a qualified electrician and or plumber or competent person Water connection A N WARNING The dishwasher must not be connected to open water appliances or instantaneous water heaters This dishwasher may be fed with either hot max 60 or cold water Nevertheless we advise you a cold water supply CAUTION A N WARNING Only use for connection to the water mains new hose set old hose set must not be reused If the machine is connected to new pipes or pipes which have not been used for a long time you should run the water for a few minutes before connecting the inlet hose
20. n force within your new country of residence 29 www electrolux com Albania Belgique Belgi Belgien Ceska republika Danmark Deutschland Eesti Espafia France Great Britain Hellas Hrvatska Ireland Italia Latvija Lituania Luxembourg Magyarorszag Nederland Norge sterreich Polska Portugal Romania Schweiz Suisse Svizzera Slovenija Slovensko Suomi Sverige T rkiye Poccua 30 oa pay 35 5 4 261 450 32 2 363 04 44 420 2 61 12 61 12 45 70 11 74 00 49 180 32 26 622 37 2 66 50 030 34 902 11 63 88 www electrolux fr 44 8705 929 929 30 23 10 56 19 70 385 1 63 23 338 353 1 40 90 753 39 0 434 558500 37 17 84 59 34 370 5 27 80 609 35 2 42 43 13 01 36 1 252 1773 31 17 24 68 300 47 81 5 30 222 43 18 66 400 48 22 43 47 300 35 12 14 40 39 39 40 21 44 42 581 41 62 88 99 111 38 61 24 25 731 421 2 43 33 43 22 35 8 26 22 33 00 46 0 771 76 76 76 90 21 22 93 10 25 7 095 937 7837 Rr Pjeter Bogdani Nr 7 Tirane Bergensesteenweg 719 1502 Lembeek Bud jovicka 3 Praha 4 140 21 Sj llandsgade 2 7000 Fredericia Muggenhofer Str 135 90429 N rnberg Mustam e tee 24 10621 Tallinn Carretera M 300 Km 29 900 Alcala de Henares Madrid Addington Way Luton Bedfordshire LU4 9QQ 4 Limnou Str 54627 Thessaloniki Slavonska avenija 3 10000 Zagreb Longmile Road Dublin 12 C so Lino Zanussi 26 33080 Porcia PN Kr Barona iela 130 2
21. ng spots or a bluish coating on glasses and dishes Water drops have dried e Increase rinse aid dosing onto glasses and dishes The detergent may be the cause Contact the detergent manufacturer s consumer care line If after all these checks the problem persists contact your local Service Force Centre quoting the model Mod product number PNC and serial number S N This information can be found on the rating plate located on the side of the dishwasher door see picture So that you always have these numbers at hand we recommend you to make a note of them here 21 Technical data Dimensions Width 60 cm Height 85 cm Depth 61 00 Electrical connection Information on the electrical connection is given on the rating plate on Voltage Overall power Fuse the inner edge of the dishwasher s door Water supply pressure Minimum 0 05 MPa 0 5 bar Maximum 0 8 MPa 8 bar Capacity 12 place settings Max weight 41 kg Noise level 47 dB A Consumption values The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the variations of the power supply and the amount of dishes Programme Programme duration Water si litres Intensive 70 1 7 1 9 23 25 Auto 65 50 1 1 1 5 12 25 30 min 0 8 9 Eco 50 Test programme for 1 05 15 Test Institutes Rinse and Hold lt 0 1 4 The programme duration is visible in the dig
22. on cables must not be used This could constitute a fire hazard through overheating If necessary have the domestic wiring system socket replaced In case that the electrical cable has to be replaced contact your local Service Force centre The plug must be accessible after the appliance has been installed Never unplug the appliance by pulling on the cable Always pull the plug 25 Fitting under a counter By removing the dishwasher s worktop you can install it under a close fitting sink unit or a pre existing top Be sure that once the appliance has been installed it is easily accessible for the service engineer in the event that a repair is required Unscrew the two screws at the rear Levelling Good levelling is essential for correct closure and sealing of the door When the appliance is correctly levelled the door will not catch on either side of the cabinet 26 Push the top backwards Lift top at the front and about 1 cm remove it Check if the dishwasher If not loosen or tighten is levelled the adjustable feet until the appliance is perfectly levelled Service and spare parts In the event of your appliance requiring service or if you wish to purchase spare parts please contact your local Service Force Centre by telephoning 08705 929929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area
23. ons Na Ze De N le SS amp Open the lid Fill in the detergent in Observe the dosing compartment A levels For programmes with When using detergent Close the lid prewash add an tablets additional detergent place detergent tablets dose in compartment B in compartment A Unloading the dishwasher IMPORTANT e Empty the lower basket first and then the Open the dishwasher s door leave it ajar and upper one this will avoid water dripping from wait a few minutes before removing the the upper basket onto the dishes in the lower dishes hot dishes are sensitive to knocks In one this way they will be cooler and the drying will e Water may appear on the sides and the door be improved of the dishwasher as the stainless steel will eventually become cooler than the dishes Cleaning and care Cleaning the filters IMPORTANT NEVER use the dishwasher without filters Incorrect repositioning and fitting of the filters will produce poor washing results The dishwasher must Clean filters A B and C Turn the handle about Remove filter A from the be switched off thoroughly under 14 turn anticlockwise base of the washing running water and remove filters B compartment and C Put the flat filter A back Replace the filters and in the base of the lock by turning the washing compartment handle clockwise to the and ensure that it fits stop
24. ortant to ensure that all people using the appliance are thoroughly familiar with its operation and safety features Save these instructions and make sure that they remain with the appliance if it is moved or sold so that everyone using it through its life will be properly informed on appliance use and safety Correct use This dishwasher is only intended for washing household utensils suitable for machine washing Do not put any solvents in the dishwasher This could cause an explosion Knives and other items with sharp points must be loaded in the cutlery basket with their points down or placed in a horizontal position in the upper basket Only use products detergent salt and rinse aid suitable for dishwashers e Avoid opening the door whilst the appliance is in operation hot steam may escape e Do not take any dishes out of the dishwasher before the end of the dishwashing cycle e After use isolate the appliance from the power supply and turn off the water supply This product should be serviced only by an authorised service engineer and only genuine spare parts should be used General safety e Dishwasher detergents can cause chemical burns to eyes mouth and throat Could endanger life Comply with the safety instructions of the dishwasher detergent manufacturer The water in your dishwasher is not for drinking Detergent residues may still be present in your machine e Ensure that the door of
25. sket Light items plastic bowls etc must be loaded in the upper basket and arranged so they do not move For taller items the cup racks can be folded upwards TA a i OTN TV VY LX If plates are to be loaded in the upper basket load them starting from the rear positions tilting them slightly forwards and avoiding the front positions near the door 15 Adjusting the height of the upper basket If washing very large plates you can load them in the lower basket after moving the upper basket to the higher position Maximum height of the dishes in upper basket lower basket With upper basket raised 20 cm 31 cm With upper basket lowered 24 cm 27 cm To move to the higher position proceed as follows 1 Pull out the basket until it stops 2 Carefully lift both sides upwards until the mechanism is engaged and the basket is stable To lower the basket to the original position proceed as follows 1 Pull out the basket until it stops 2 Carefully lift both sides upwards and then allow the mechanism to drop back down slowly keeping hold of it IMPORTANT Never lift or lower the basket on one side only IMPORTANT When the basket is in the higher position you will not be able to use the cup racks ZANUSSI Electrolux Filling with detergent IMPORTANT Only use detergents suitable for dishwashers Observe the manufacturer s dosing and storage recommendati
26. the dishwasher is always closed when it is not being loaded or unloaded In this way you will avoid anybody tripping over the open door and hurting themselves e Do not sit or stand on the open door Child safety This appliance is designed to be operated by adults Don t allow children to use the dishwasher unsupervised Keep all packaging well away from children There is risk of suffocation Keep all detergents in a safe place out of children s reach Keep children well away from the dishwasher when the door is open Installation Check your dishwasher for any transport damage Never connect a damaged machine If your dishwasher is damaged contact your supplier All packaging must be removed before use Any electrical and plumbing work required to install this appliance must be carried out by a qualified and competent person e For safety reasons it is dangerous to alter the specifications or attempt to modify this product in any way Never use the dishwasher if the electrical supply cable and water hoses are damaged or if the control panel work top or plinth area are damaged such that the inside of the appliance is freely accessible Contact your local Service Force centre in order to avoid hazard All sides of the dishwasher must never be drilled to prevent damage to hydraulic and electric components A N WARNING For electrical and water connection carefully follow the instructions
27. ved with the help of the indications described in the chart without calling out an engineer Switch off the dishwasher open the door and carry out the following suggested corrective actions Faultcode maltunction e The dishwasher does not fill with water continuous flashing of the light of the running programme iL appears in the digital display The dishwasher will not drain continuous flashing of the light of the running programme CU appears in the digital display continuous flashing of the light of the running programme 3U appears in the digital display The programme does not start The water tap is blocked or furred with limescale The water tap is turned off The filter where present in the threaded hose fitting at the water inlet valve is blocked The water inlet hose has not been correctly laid or it is bent or squashed The sink spigot is blocked The water drain hose has not been correctly laid or it is bent or squashed Anti flood device is activated The dishwasher door has not been properly closed The main plug is not plugged in The fuse has blown in the household fuse box Delay start has been selected Clean the water tap Turn the water tap on Clean the filter in the threaded hose fitting Check the water inlet hose connection Clean out the sink spigot Check the water drain hose connection Close the water tap and contact your loc
Download Pdf Manuals
Related Search